summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/include/asm/pci.h2
-rw-r--r--arch/arm/mach-mx3/pcm037.c2
-rw-r--r--arch/arm/mach-pxa/tosa.c11
-rw-r--r--arch/arm/plat-omap/devices.c123
-rw-r--r--drivers/pcmcia/soc_common.c6
-rw-r--r--drivers/serial/imx.c27
6 files changed, 131 insertions, 40 deletions
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 721c03d53f4..918d0cbbf06 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (0)
+#define PCI_DMA_BUS_IS_PHYS (1)
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 0a152ed15a8..df8582a6231 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
};
static struct imxuart_platform_data uart_pdata = {
- .flags = 0,
+ .flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 5dab30eafdd..9f3ef9eb32e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -50,6 +50,7 @@
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long tosa_pin_config[] = {
@@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
.wakeup = 1,
.active_low = 1,
},
+ {
+ .type = EV_SW,
+ .code = SW_HEADPHONE_INSERT,
+ .gpio = TOSA_GPIO_EAR_IN,
+ .desc = "HeadPhone insert",
+ .active_low = 1,
+ .debounce_interval = 300,
+ },
};
static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -792,6 +801,8 @@ static void __init tosa_init(void)
pxa_set_i2c_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
+ clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 187e3d8bfdf..bc1cf30c83e 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -21,6 +21,7 @@
#include <mach/tc.h>
#include <mach/board.h>
+#include <mach/mmc.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+ defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MMC1_BASE 0x4809c000
-#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc)
+#define OMAP_MMC1_INT INT_24XX_MMC_IRQ
+
+#define OMAP_MMC2_BASE 0x480b4000
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc)
+#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ
+
#else
+
#define OMAP_MMC1_BASE 0xfffb7800
+#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f)
#define OMAP_MMC1_INT INT_MMC
-#endif
+
#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f)
+#define OMAP_MMC2_INT INT_1610_MMC2
-static struct omap_mmc_conf mmc1_conf;
+#endif
+
+static struct omap_mmc_platform_data mmc1_data;
static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
.start = OMAP_MMC1_BASE,
- .end = OMAP_MMC1_BASE + 0x7f,
+ .end = OMAP_MMC1_END,
.flags = IORESOURCE_MEM,
},
{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
.id = 1,
.dev = {
.dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
+ .platform_data = &mmc1_data,
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources,
};
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;
static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
.start = OMAP_MMC2_BASE,
- .end = OMAP_MMC2_BASE + 0x7f,
+ .end = OMAP_MMC2_END,
.flags = IORESOURCE_MEM,
},
{
- .start = INT_1610_MMC2,
+ .start = OMAP_MMC2_INT,
.flags = IORESOURCE_IRQ,
},
};
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
.id = 2,
.dev = {
.dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
+ .platform_data = &mmc2_data,
},
.num_resources = ARRAY_SIZE(mmc2_resources),
.resource = mmc2_resources,
};
#endif
-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
return;
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
+ if (mmc_conf->mmc[0].enabled) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H18_24XX_MMC_CMD);
omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
}
- if (mmc->wire4) {
+ if (mmc_conf->mmc[0].wire4) {
if (cpu_is_omap24xx()) {
omap_cfg_reg(H14_24XX_MMC_DAT1);
omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,35 @@ static void __init omap_init_mmc(void)
} else {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
+ if (!mmc_conf->mmc[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
+#if defined(CONFIG_ARCH_OMAP2420)
+ if (mmc_conf->mmc[0].internal_clock) {
+ /*
+ * Use internal loop-back in MMC/SDIO
+ * Module Input Clock selection
+ */
+ if (cpu_is_omap24xx()) {
+ u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+ v |= (1 << 24); /* not used in 243x */
+ omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+ }
+ }
+#endif
}
#ifdef CONFIG_ARCH_OMAP16XX
/* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
+ if (mmc_conf->mmc[1].enabled) {
+ if (!mmc_conf->mmc[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
+ if (mmc_conf->mmc[1].wire4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +355,55 @@ static void __init omap_init_mmc(void)
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
+ }
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+ const struct omap_mmc_config *mmc_conf;
+
+ /* NOTE: assumes MMC was never (wrongly) enabled */
+ mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+ if (!mmc_conf)
+ return;
+
+ omap_init_mmc_conf(mmc_conf);
+
+ if (mmc_conf->mmc[0].enabled) {
+ mmc1_data.conf = mmc_conf->mmc[0];
+ (void) platform_device_register(&mmc_omap_device1);
+ }
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ if (mmc_conf->mmc[1].enabled) {
+ mmc2_data.conf = mmc_conf->mmc[1];
(void) platform_device_register(&mmc_omap_device2);
}
#endif
- return;
}
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+ switch (host) {
+ case 1:
+ mmc1_data = *info;
+ break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+ defined(CONFIG_ARCH_OMAP34XX)
+ case 2:
+ mmc2_data = *info;
+ break;
+#endif
+ default:
+ BUG();
+ }
+}
+
#else
static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
#endif
/*-------------------------------------------------------------------------*/
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index c48f3f69bda..da397215322 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &dev_attr_status);
+ ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+ if (ret)
+ goto out_err_8;
}
dev_set_drvdata(dev, sinfo);
@@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
do {
skt = &sinfo->skt[i];
+ device_remove_file(&skt->socket.dev, &dev_attr_status);
+ out_err_8:
del_timer_sync(&skt->poll_timer);
pcmcia_unregister_socket(&skt->socket);
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 6a29f9330a7..3f90f1bbbbc 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -127,8 +127,13 @@
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */
-#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */
+#ifdef CONFIG_ARCH_IMX
+#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
+#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
+#endif
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */
+#endif
#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */
#define UCR3_BPEN (1<<0) /* Preset registers enable */
#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */
@@ -445,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
imx_txint(irq, dev_id);
- if (sts & USR1_RTSS)
+ if (sts & USR1_RTSD)
imx_rtsint(irq, dev_id);
return IRQ_HANDLED;
@@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port)
temp |= (UCR2_RXEN | UCR2_TXEN);
writel(temp, sport->port.membase + UCR2);
+#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
+ temp = readl(sport->port.membase + UCR3);
+ temp |= UCR3_RXDMUXSEL;
+ writel(temp, sport->port.membase + UCR3);
+#endif
+
/*
* Enable modem status interrupts
*/
@@ -1133,13 +1144,19 @@ static int serial_imx_probe(struct platform_device *pdev)
if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
sport->have_rtscts = 1;
- if (pdata->init)
- pdata->init(pdev);
+ if (pdata->init) {
+ ret = pdata->init(pdev);
+ if (ret)
+ goto clkput;
+ }
uart_add_one_port(&imx_reg, &sport->port);
platform_set_drvdata(pdev, &sport->port);
return 0;
+clkput:
+ clk_put(sport->clk);
+ clk_disable(sport->clk);
unmap:
iounmap(sport->port.membase);
free:
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 13:42:33 +0000