diff options
| -rw-r--r-- | drivers/net/smsc911x.c | 13 | ||||
| -rw-r--r-- | include/linux/smsc911x.h | 10 |
2 files changed, 23 insertions, 0 deletions
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index eb7db032a78..5113b26fc2d 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -47,6 +47,7 @@ #include <linux/bitops.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/swab.h> #include <linux/phy.h> #include <linux/smsc911x.h> #include "smsc911x.h" @@ -175,6 +176,12 @@ static inline void smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, unsigned int wordcount) { + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++)); + return; + } + if (pdata->config.flags & SMSC911X_USE_32BIT) { writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); return; @@ -194,6 +201,12 @@ static inline void smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, unsigned int wordcount) { + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + *buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO)); + return; + } + if (pdata->config.flags & SMSC911X_USE_32BIT) { readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); return; diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h index b32725075d7..5241e4fb4ec 100644 --- a/include/linux/smsc911x.h +++ b/include/linux/smsc911x.h @@ -47,4 +47,14 @@ struct smsc911x_platform_config { #define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3)) #define SMSC911X_SAVE_MAC_ADDRESS (BIT(4)) +/* + * SMSC911X_SWAP_FIFO: + * Enables software byte swap for fifo data. Should only be used as a + * "last resort" in the case of big endian mode on boards with incorrectly + * routed data bus to older devices such as LAN9118. Newer devices such as + * LAN9221 can handle this in hardware, there are registers to control + * this swapping but the driver doesn't currently use them. + */ +#define SMSC911X_SWAP_FIFO (BIT(5)) + #endif /* __LINUX_SMSC911X_H__ */ |