summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c73
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c10
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c21
-rw-r--r--include/asm-powerpc/tsi108.h14
-rw-r--r--include/asm-powerpc/tsi108_irq.h124
5 files changed, 174 insertions, 68 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d7a4fc7ca23..ed00ed2455d 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -1,7 +1,7 @@
/*
* mpc7448_hpc2.c
*
- * Board setup routines for the Freescale Taiga platform
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
*
* Author: Jacob Pan
* jacob.pan@freescale.com
@@ -12,10 +12,10 @@
*
* Copyright 2004-2006 Freescale Semiconductor, Inc.
*
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
extern int tsi108_setup_pci(struct device_node *dev);
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
extern void tsi108_pci_int_init(void);
-extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused);
-
-/*
- * Define all of the IRQ senses and polarities. Taken from the
- * mpc7448hpc manual.
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-
-static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
- /* External on-board sources */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
- /* Internal Tsi108/109 interrupt sources */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
- (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
-};
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
{
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
{
struct mpic *mpic;
phys_addr_t mpic_paddr = 0;
+ unsigned int cascade_pci_irq;
+ struct device_node *tsi_pci;
struct device_node *tsi_pic;
tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
(u32) mpic_paddr);
- mpic = mpic_alloc(mpic_paddr,
+ mpic = mpic_alloc(tsi_pic, mpic_paddr,
MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
0, /* num_sources used */
- TSI108_IRQ_BASE,
0, /* num_sources used */
- NR_IRQS - 4 /* XXXX */,
- mpc7448_hpc2_pic_initsenses,
- sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
+ "Tsi108_PIC");
BUG_ON(mpic == NULL); /* XXXX */
-
mpic_init(mpic);
- mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic);
+
+ tsi_pci = of_find_node_by_type(NULL, "pci");
+ if (tsi_pci == 0) {
+ printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ return;
+ }
+
+ cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+ set_irq_data(cascade_pci_irq, mpic);
+ set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
tsi108_pci_int_init();
/* Configure MPIC outputs to CPU0 */
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+ of_node_put(tsi_pic);
}
void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
return 0;
}
+
define_machine(mpc7448_hpc2){
.name = "MPC7448 HPC2",
.probe = mpc7448_hpc2_probe,
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc820cd..f3038461d4c 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
goto err;
r[1].name = "tx";
- r[1].start = np->intrs[0].line;
- r[1].end = np->intrs[0].line;
+ r[1].start = irq_of_parse_and_map(np, 0);
+ r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
+ DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+ __FUNCTION__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i, &r[0],
- np->n_intrs + 1);
+ 1);
if (IS_ERR(tsi_eth_dev)) {
ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
tsi_eth_data.regs = r[0].start;
tsi_eth_data.phyregs = res.start;
tsi_eth_data.phy = *phy_id;
- tsi_eth_data.irq_num = np->intrs[0].line;
+ tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
of_node_put(phy);
ret =
platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 3265d54c82e..2ab06ed3ae7 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
(hose)->ops = &tsi108_direct_pci_ops;
- printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+ printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
"Firmware bus number: %d->%d\n",
rsrc.start, hose->first_busno, hose->last_busno);
@@ -278,7 +277,7 @@ static void init_pci_source(void)
mb();
}
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
{
u_int temp = 0;
int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
* Interrupt controller descriptor for cascaded PCI interrupt controller.
*/
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
.typename = "tsi108_PCI_int",
- .enable = tsi108_pci_irq_enable,
- .disable = tsi108_pci_irq_disable,
+ .mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
+ .unmask = tsi108_pci_irq_enable,
};
/*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
for (i = 0; i < NUM_PCI_IRQS; i++) {
- irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+ irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
}
init_pci_source();
}
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+ struct pt_regs *regs)
{
- return get_pci_source();
+ unsigned int cascade_irq = get_pci_source();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq, regs);
+ desc->chip->eoi(irq);
}
diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
index c4c278d72f7..2c702d35a7c 100644
--- a/include/asm-powerpc/tsi108.h
+++ b/include/asm-powerpc/tsi108.h
@@ -1,16 +1,18 @@
/*
- * include/asm-ppc/tsi108.h
- *
* common routine and memory layout for Tundra TSI108(Grendel) host bridge
* memory controller.
*
* Author: Jacob Pan (jacob.pan@freescale.com)
* Alex Bounine (alexandreb@tundra.com)
- * 2004 (c) Freescale Semiconductor Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*/
+
#ifndef __PPC_KERNEL_TSI108_H
#define __PPC_KERNEL_TSI108_H
diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h
new file mode 100644
index 00000000000..3e4d04effa5
--- /dev/null
+++ b/include/asm-powerpc/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_PPC_TSI108_IRQ_H
+#define _ASM_PPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE 0
+#endif
+
+#define TSI108_IRQ(x) (TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS (36 + 4) /* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO 0xF
+
+#define TSI108_IRQ_SPURIOUS (TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL 10 /* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0 TSI108_IRQ(0) /* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1 TSI108_IRQ(1) /* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2 TSI108_IRQ(2) /* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3 TSI108_IRQ(3) /* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0 TSI108_IRQ(4) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1 TSI108_IRQ(5) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2 TSI108_IRQ(6) /* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3 TSI108_IRQ(7) /* Reserved IRQ */
+#define IRQ_TSI108_DMA0 TSI108_IRQ(8) /* DMA0 */
+#define IRQ_TSI108_DMA1 TSI108_IRQ(9) /* DMA1 */
+#define IRQ_TSI108_DMA2 TSI108_IRQ(10) /* DMA2 */
+#define IRQ_TSI108_DMA3 TSI108_IRQ(11) /* DMA3 */
+#define IRQ_TSI108_UART0 TSI108_IRQ(12) /* UART0 */
+#define IRQ_TSI108_UART1 TSI108_IRQ(13) /* UART1 */
+#define IRQ_TSI108_I2C TSI108_IRQ(14) /* I2C */
+#define IRQ_TSI108_GPIO TSI108_IRQ(15) /* GPIO */
+#define IRQ_TSI108_GIGE0 TSI108_IRQ(16) /* GIGE0 */
+#define IRQ_TSI108_GIGE1 TSI108_IRQ(17) /* GIGE1 */
+#define IRQ_TSI108_RESERVED4 TSI108_IRQ(18) /* Reserved IRQ */
+#define IRQ_TSI108_HLP TSI108_IRQ(19) /* HLP */
+#define IRQ_TSI108_SDRAM TSI108_IRQ(20) /* SDC */
+#define IRQ_TSI108_PROC_IF TSI108_IRQ(21) /* Processor IF */
+#define IRQ_TSI108_RESERVED5 TSI108_IRQ(22) /* Reserved IRQ */
+#define IRQ_TSI108_PCI TSI108_IRQ(23) /* PCI/X block */
+
+#define IRQ_TSI108_MBOX0 TSI108_IRQ(24) /* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1 TSI108_IRQ(25) /* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2 TSI108_IRQ(26) /* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3 TSI108_IRQ(27) /* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0 TSI108_IRQ(28) /* Doorbell 0 */
+#define IRQ_TSI108_DBELL1 TSI108_IRQ(29) /* Doorbell 1 */
+#define IRQ_TSI108_DBELL2 TSI108_IRQ(30) /* Doorbell 2 */
+#define IRQ_TSI108_DBELL3 TSI108_IRQ(31) /* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0 TSI108_IRQ(32) /* Global Timer 0 */
+#define IRQ_TSI108_TIMER1 TSI108_IRQ(33) /* Global Timer 1 */
+#define IRQ_TSI108_TIMER2 TSI108_IRQ(34) /* Global Timer 2 */
+#define IRQ_TSI108_TIMER3 TSI108_IRQ(35) /* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE TSI108_IRQ(36)
+#define IRQ_PCI_INTA (IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB (IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC (IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD (IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS (4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE (TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0 0x1
+#define IDIR_INT_OUT1 0x2
+#define IDIR_INT_OUT2 0x4
+#define IDIR_INT_OUT3 0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+ TSI108_IRQ_DIRECTED,
+ TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif /* _ASM_PPC_TSI108_IRQ_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 21:21:48 +0000