diff options
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 1016 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-omap3.c | 584 |
2 files changed, 132 insertions, 1468 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 18df6c6a580..7e41a95c5ce 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -4,9 +4,10 @@ * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * - * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2011 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi <felipe.balbi@nokia.com> @@ -27,116 +28,19 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Nov 21, 2010): + * TODO (last updated Feb 27, 2010): * - add kernel-doc * - enable AUTOIDLE * - add suspend/resume - * - move workarounds to board-files - * - factor out code common to OHCI * - add HSIC and TLL support * - convert to use hwmod and runtime PM */ #include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ehci_omap_readl()/ehci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) -#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) -#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) -#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) -#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) - -#define OMAP_TLL_CHANNEL_COUNT 3 -#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) -#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) -#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -/* OMAP4-specific defines */ -#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) -#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) - -#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) -#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) -#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) - -#define OMAP4_P1_MODE_CLEAR (3 << 16) -#define OMAP4_P1_MODE_TLL (1 << 16) -#define OMAP4_P1_MODE_HSIC (3 << 16) -#define OMAP4_P2_MODE_CLEAR (3 << 18) -#define OMAP4_P2_MODE_TLL (1 << 18) -#define OMAP4_P2_MODE_HSIC (3 << 18) - -#define OMAP_REV2_TLL_CHANNEL_COUNT 2 - -#define OMAP_UHH_DEBUG_CSR (0x44) - /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) @@ -148,141 +52,24 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Values of UHH_REVISION - Note: these are not given in the TRM */ -#define OMAP_EHCI_REV1 0x00000010 /* OMAP3 */ -#define OMAP_EHCI_REV2 0x50700100 /* OMAP4 */ +/*-------------------------------------------------------------------------*/ -#define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1) -#define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2) +static const struct hc_driver ehci_omap_hc_driver; -#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) -#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) -#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) -/*-------------------------------------------------------------------------*/ - -static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val) +static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { __raw_writel(val, base + reg); } -static inline u32 ehci_omap_readl(void __iomem *base, u32 reg) +static inline u32 ehci_read(void __iomem *base, u32 reg) { return __raw_readl(base + reg); } -static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ehci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ehci_hcd_omap { - struct ehci_hcd *ehci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost_hs_fck; - struct clk *usbhost_fs_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - struct clk *xclk60mhsp1_ck; - struct clk *xclk60mhsp2_ck; - struct clk *utmi_p1_fck; - struct clk *usbhost_p1_fck; - struct clk *usbtll_p1_fck; - struct clk *utmi_p2_fck; - struct clk *usbhost_p2_fck; - struct clk *usbtll_p2_fck; - - /* FIXME the following two workarounds are - * board specific not silicon-specific so these - * should be moved to board-file instead. - * - * Maybe someone from TI will know better which - * board is affected and needs the workarounds - * to be applied - */ - - /* gpio for resetting phy */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* phy reset workaround */ - int phy_reset; - - /* IP revision */ - u32 omap_ehci_rev; - - /* desired phy_mode: TLL, PHY */ - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ehci_base; - - /* Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -/*-------------------------------------------------------------------------*/ - -static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask, - u8 tll_channel_count) -{ - unsigned reg; - int i; - - /* Program the 3 TLL channels upfront */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Disable AutoIdle, BitStuffing and use SDR Mode */ - reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE - | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF - | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } - - /* Program Common TLL register */ - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON - | OMAP_TLL_SHARED_CONF_USB_DIVRATION - | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - - ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Enable channels now */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Enable only the reg that is needed */ - if (!(tll_channel_mask & 1<<i)) - continue; - - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - - ehci_omap_writeb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); - dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n", - i+1, ehci_omap_readb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i))); - } -} - -/*-------------------------------------------------------------------------*/ - -static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) +static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); unsigned long timeout = jiffies + msecs_to_jiffies(1000); unsigned reg = 0; @@ -296,600 +83,20 @@ static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) /* start ULPI access*/ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg); + ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg); /* Wait for ULPI access completion */ - while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI) + while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI) & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { cpu_relax(); if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "phy reset operation timed out\n"); + dev_dbg(&pdev->dev, "phy reset operation timed out\n"); break; } } } -/* omap_start_ehc - * - Start the TI USBHOST controller - */ -static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u8 tll_ch_mask = 0; - unsigned reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI EHCI USB Controller\n"); - - /* Enable Clocks for USBHOST */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - clk_enable(omap->usbhost_ick); - - omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck"); - if (IS_ERR(omap->usbhost_hs_fck)) { - ret = PTR_ERR(omap->usbhost_hs_fck); - goto err_host_120m_fck; - } - clk_enable(omap->usbhost_hs_fck); - - omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck"); - if (IS_ERR(omap->usbhost_fs_fck)) { - ret = PTR_ERR(omap->usbhost_fs_fck); - goto err_host_48m_fck; - } - clk_enable(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - /* Refer: ISSUE1 */ - if (gpio_is_valid(omap->reset_gpio_port[0])) { - gpio_request(omap->reset_gpio_port[0], - "USB1 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[0], 0); - } - - if (gpio_is_valid(omap->reset_gpio_port[1])) { - gpio_request(omap->reset_gpio_port[1], - "USB2 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[1], 0); - } - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - - /* Configure TLL for 60Mhz clk for ULPI */ - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; - } - clk_enable(omap->usbtll_fck); - - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; - } - clk_enable(omap->usbtll_ick); - - omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base, - OMAP_UHH_REVISION); - dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n", - omap->omap_ehci_rev); - - /* - * Enable per-port clocks as needed (newer controllers only). - * - External ULPI clock for PHY mode - * - Internal clocks for TLL and HSIC modes (TODO) - */ - if (is_omap_ehci_rev2(omap)) { - switch (omap->port_mode[0]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap->xclk60mhsp1_ck = clk_get(omap->dev, - "xclk60mhsp1_ck"); - if (IS_ERR(omap->xclk60mhsp1_ck)) { - ret = PTR_ERR(omap->xclk60mhsp1_ck); - dev_err(omap->dev, - "Unable to get Port1 ULPI clock\n"); - } - - omap->utmi_p1_fck = clk_get(omap->dev, - "utmi_p1_gfclk"); - if (IS_ERR(omap->utmi_p1_fck)) { - ret = PTR_ERR(omap->utmi_p1_fck); - dev_err(omap->dev, - "Unable to get utmi_p1_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p1_fck, - omap->xclk60mhsp1_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P1 f-clock\n"); - } - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap->xclk60mhsp1_ck = clk_get(omap->dev, - "init_60m_fclk"); - if (IS_ERR(omap->xclk60mhsp1_ck)) { - ret = PTR_ERR(omap->xclk60mhsp1_ck); - dev_err(omap->dev, - "Unable to get Port1 ULPI clock\n"); - } - - omap->utmi_p1_fck = clk_get(omap->dev, - "utmi_p1_gfclk"); - if (IS_ERR(omap->utmi_p1_fck)) { - ret = PTR_ERR(omap->utmi_p1_fck); - dev_err(omap->dev, - "Unable to get utmi_p1_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p1_fck, - omap->xclk60mhsp1_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P1 f-clock\n"); - } - - omap->usbhost_p1_fck = clk_get(omap->dev, - "usb_host_hs_utmi_p1_clk"); - if (IS_ERR(omap->usbhost_p1_fck)) { - ret = PTR_ERR(omap->usbhost_p1_fck); - dev_err(omap->dev, - "Unable to get HOST PORT 1 clk\n"); - } else { - clk_enable(omap->usbhost_p1_fck); - } - - omap->usbtll_p1_fck = clk_get(omap->dev, - "usb_tll_hs_usb_ch0_clk"); - - if (IS_ERR(omap->usbtll_p1_fck)) { - ret = PTR_ERR(omap->usbtll_p1_fck); - dev_err(omap->dev, - "Unable to get TLL CH0 clk\n"); - } else { - clk_enable(omap->usbtll_p1_fck); - } - break; - /* TODO */ - default: - break; - } - switch (omap->port_mode[1]) { - case OMAP_EHCI_PORT_MODE_PHY: - omap->xclk60mhsp2_ck = clk_get(omap->dev, - "xclk60mhsp2_ck"); - if (IS_ERR(omap->xclk60mhsp2_ck)) { - ret = PTR_ERR(omap->xclk60mhsp2_ck); - dev_err(omap->dev, - "Unable to get Port2 ULPI clock\n"); - } - - omap->utmi_p2_fck = clk_get(omap->dev, - "utmi_p2_gfclk"); - if (IS_ERR(omap->utmi_p2_fck)) { - ret = PTR_ERR(omap->utmi_p2_fck); - dev_err(omap->dev, - "Unable to get utmi_p2_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p2_fck, - omap->xclk60mhsp2_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P2 f-clock\n"); - } - break; - case OMAP_EHCI_PORT_MODE_TLL: - omap->xclk60mhsp2_ck = clk_get(omap->dev, - "init_60m_fclk"); - if (IS_ERR(omap->xclk60mhsp2_ck)) { - ret = PTR_ERR(omap->xclk60mhsp2_ck); - dev_err(omap->dev, - "Unable to get Port2 ULPI clock\n"); - } - - omap->utmi_p2_fck = clk_get(omap->dev, - "utmi_p2_gfclk"); - if (IS_ERR(omap->utmi_p2_fck)) { - ret = PTR_ERR(omap->utmi_p2_fck); - dev_err(omap->dev, - "Unable to get utmi_p2_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p2_fck, - omap->xclk60mhsp2_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P2 f-clock\n"); - } - - omap->usbhost_p2_fck = clk_get(omap->dev, - "usb_host_hs_utmi_p2_clk"); - if (IS_ERR(omap->usbhost_p2_fck)) { - ret = PTR_ERR(omap->usbhost_p2_fck); - dev_err(omap->dev, - "Unable to get HOST PORT 2 clk\n"); - } else { - clk_enable(omap->usbhost_p2_fck); - } - - omap->usbtll_p2_fck = clk_get(omap->dev, - "usb_tll_hs_usb_ch1_clk"); - - if (IS_ERR(omap->usbtll_p2_fck)) { - ret = PTR_ERR(omap->usbtll_p2_fck); - dev_err(omap->dev, - "Unable to get TLL CH1 clk\n"); - } else { - clk_enable(omap->usbtll_p2_fck); - } - break; - /* TODO */ - default: - break; - } - } - - - /* perform TLL soft reset, and wait until reset is complete */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } - } - - dev_dbg(omap->dev, "TLL RESET DONE\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - if (is_omap_ehci_rev1(omap)) { - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - - - } else if (is_omap_ehci_rev2(omap)) { - reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; - reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; - } - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - if (is_omap_ehci_rev1(omap)) { - if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - /* Bypass the TLL module for PHY mode operation */ - if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0]) || - is_ehci_phy_mode(omap->port_mode[1]) || - is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[1])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[2])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - } - } else if (is_omap_ehci_rev2(omap)) { - /* Clear port mode fields for PHY mode*/ - reg &= ~OMAP4_P1_MODE_CLEAR; - reg &= ~OMAP4_P2_MODE_CLEAR; - - if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_HSIC; - - if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_HSIC; - } - - ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - - /* - * An undocumented "feature" in the OMAP3 EHCI controller, - * causes suspended ports to be taken out of suspend when - * the USBCMD.Run/Stop bit is cleared (for example when - * we do ehci_bus_suspend). - * This breaks suspend-resume if the root-hub is allowed - * to suspend. Writing 1 to this undocumented register bit - * disables this feature and restores normal behavior. - */ - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04, - EHCI_INSNREG04_DISABLE_UNSUSPEND); - - if ((omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) || - (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) || - (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL)) { - - if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; - if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; - if (omap->port_mode[2] == OMAP_EHCI_PORT_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; - - /* Enable UTMI mode for required TLL channels */ - omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT); - } - - if (omap->phy_reset) { - /* Refer ISSUE1: - * Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_set_value(omap->reset_gpio_port[0], 1); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_set_value(omap->reset_gpio_port[1], 1); - } - - /* Soft reset the PHY using PHY reset command over ULPI */ - if (omap->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 0); - if (omap->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 1); - - return 0; - -err_sys_status: - - if (omap->usbtll_p2_fck != NULL) { - clk_disable(omap->usbtll_p2_fck); - clk_put(omap->usbtll_p2_fck); - } - if (omap->usbhost_p2_fck != NULL) { - clk_disable(omap->usbhost_p2_fck); - clk_put(omap->usbhost_p2_fck); - } - if (omap->usbtll_p1_fck != NULL) { - clk_disable(omap->usbtll_p1_fck); - clk_put(omap->usbtll_p1_fck); - } - if (omap->usbhost_p1_fck != NULL) { - clk_disable(omap->usbhost_p1_fck); - clk_put(omap->usbhost_p1_fck); - } - - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - -err_host_48m_fck: - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); - -err_host_120m_fck: - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset OMAP modules for insmod/rmmod to work */ - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - is_omap_ehci_rev2(omap) ? - OMAP4_UHH_SYSCONFIG_SOFTRESET : - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 1))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 2))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - if (omap->usbtll_fck != NULL) { - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost_fs_fck != NULL) { - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - omap->usbhost_fs_fck = NULL; - } - - if (omap->usbhost_hs_fck != NULL) { - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); - omap->usbhost_hs_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - if (is_omap_ehci_rev2(omap)) { - if (omap->xclk60mhsp1_ck != NULL) { - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - omap->xclk60mhsp1_ck = NULL; - } - - if (omap->utmi_p1_fck != NULL) { - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - omap->utmi_p1_fck = NULL; - } - - if (omap->xclk60mhsp2_ck != NULL) { - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - omap->xclk60mhsp2_ck = NULL; - } - - if (omap->utmi_p2_fck != NULL) { - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - omap->utmi_p2_fck = NULL; - } - - if (omap->usbtll_p2_fck != NULL) { - clk_disable(omap->usbtll_p2_fck); - clk_put(omap->usbtll_p2_fck); - omap->usbtll_p2_fck = NULL; - } - - if (omap->usbhost_p2_fck != NULL) { - clk_disable(omap->usbhost_p2_fck); - clk_put(omap->usbhost_p2_fck); - omap->usbhost_p2_fck = NULL; - } - - if (omap->usbtll_p1_fck != NULL) { - clk_disable(omap->usbtll_p1_fck); - clk_put(omap->usbtll_p1_fck); - omap->usbtll_p1_fck = NULL; - } - - if (omap->usbhost_p1_fck != NULL) { - clk_disable(omap->usbhost_p1_fck); - clk_put(omap->usbhost_p1_fck); - omap->usbhost_p1_fck = NULL; - } - } - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_omap_hc_driver; /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -903,155 +110,113 @@ static const struct hc_driver ehci_omap_hc_driver; */ static int ehci_hcd_omap_probe(struct platform_device *pdev) { - struct usbhs_omap_board_data *pdata = pdev->dev.platform_data; - struct ehci_hcd_omap *omap; - struct resource *res; - struct usb_hcd *hcd; + struct device *dev = &pdev->dev; + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + struct ehci_hcd *omap_ehci; + int ret = -ENODEV; + int irq; - int irq = platform_get_irq(pdev, 0); - int ret = -ENODEV; - int i; - char supply[7]; + if (usb_disabled()) + return -ENODEV; - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - if (usb_disabled()) - goto err_disabled; + irq = platform_get_irq_byname(pdev, "ehci-irq"); + if (irq < 0) { + dev_err(dev, "EHCI irq failed\n"); + return -ENODEV; + } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ehci"); + if (!res) { + dev_err(dev, "UHH EHCI get resource failed\n"); + return -ENODEV; + } + + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH EHCI ioremap failed\n"); + return -ENOMEM; } - hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, + dev_name(dev)); if (!hcd) { - dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); + dev_err(dev, "failed to create hcd with err %d\n", ret); ret = -ENOMEM; - goto err_create_hcd; + goto err_io; } - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->phy_reset = pdata->phy_reset; - omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; - omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; - omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->ehci = hcd_to_ehci(hcd); - omap->ehci->sbrn = 0x20; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); - hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "EHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } - - /* we know this is the memory we want, no need to ioremap again */ - omap->ehci->caps = hcd->regs; - omap->ehci_base = hcd->regs; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; + ret = omap_usbhs_enable(dev); + if (ret) { + dev_err(dev, "failed to start usbhs with err %d\n", ret); + goto err_enable; } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } + /* + * An undocumented "feature" in the OMAP3 EHCI controller, + * causes suspended ports to be taken out of suspend when + * the USBCMD.Run/Stop bit is cleared (for example when + * we do ehci_bus_suspend). + * This breaks suspend-resume if the root-hub is allowed + * to suspend. Writing 1 to this undocumented register bit + * disables this feature and restores normal behavior. + */ + ehci_write(regs, EHCI_INSNREG04, + EHCI_INSNREG04_DISABLE_UNSUSPEND); - /* get ehci regulator and enable */ - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) { - omap->regulator[i] = NULL; - continue; - } - snprintf(supply, sizeof(supply), "hsusb%d", i); - omap->regulator[i] = regulator_get(omap->dev, supply); - if (IS_ERR(omap->regulator[i])) { - omap->regulator[i] = NULL; - dev_dbg(&pdev->dev, - "failed to get ehci port%d regulator\n", i); - } else { - regulator_enable(omap->regulator[i]); - } - } + /* Soft reset the PHY using PHY reset command over ULPI */ + if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 0); + if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 1); - ret = omap_start_ehc(omap, hcd); - if (ret) { - dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); - goto err_start; - } + omap_ehci = hcd_to_ehci(hcd); + omap_ehci->sbrn = 0x20; - omap->ehci->regs = hcd->regs - + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); + /* we know this is the memory we want, no need to ioremap again */ + omap_ehci->caps = hcd->regs; + omap_ehci->regs = hcd->regs + + HC_LENGTH(readl(&omap_ehci->caps->hc_capbase)); - dbg_hcs_params(omap->ehci, "reset"); - dbg_hcc_params(omap->ehci, "reset"); + dbg_hcs_params(omap_ehci, "reset"); + dbg_hcc_params(omap_ehci, "reset"); /* cache this readonly data; minimize chip reads */ - omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); + omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } /* root ports should always stay powered */ - ehci_port_power(omap->ehci, 1); + ehci_port_power(omap_ehci, 1); return 0; err_add_hcd: - omap_stop_ehc(omap, hcd); + omap_usbhs_disable(dev); -err_start: - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); - -err_ioremap: +err_enable: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_disabled: -err_pdata: +err_io: return ret; } -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ /** * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs @@ -1063,31 +228,18 @@ err_pdata: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); - int i; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); usb_remove_hcd(hcd); - omap_stop_ehc(omap, hcd); - iounmap(hcd->regs); - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); - return 0; } static void ehci_hcd_omap_shutdown(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index 3f9db87fe52..6048f2f64f7 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -7,6 +7,7 @@ * Copyright (C) 2007-2010 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Based on ehci-omap.c and some other ohci glue layers * @@ -24,150 +25,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Mar 10th, 2010): + * TODO (last updated Feb 27, 2011): * - add kernel-doc - * - Factor out code common to EHCI to a separate file - * - Make EHCI and OHCI coexist together - * - needs newer silicon versions to actually work - * - the last one to be loaded currently steps on the other's toes - * - Add hooks for configuring transceivers, etc. at init/exit - * - Add aggressive clock-management code */ #include <linux/platform_device.h> -#include <linux/clk.h> - #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ohci_omap_readl()/ohci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_CHANNEL_COUNT 3 - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_SYSSTATUS_UHHRESETDONE (1 << 0) -#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE (1 << 1) -#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE (1 << 2) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -#define OMAP_UHH_DEBUG_CSR (0x44) - /*-------------------------------------------------------------------------*/ -static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val) -{ - __raw_writel(val, base + reg); -} - -static inline u32 ohci_omap_readl(void __iomem *base, u32 reg) -{ - return __raw_readl(base + reg); -} - -static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ohci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ohci_hcd_omap3 { - struct ohci_hcd *ohci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost2_120m_fck; - struct clk *usbhost1_48m_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - - /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ - enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ohci_base; - - unsigned es2_compatibility:1; -}; - -/*-------------------------------------------------------------------------*/ - -static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on) -{ - if (on) { - clk_enable(omap->usbtll_ick); - clk_enable(omap->usbtll_fck); - clk_enable(omap->usbhost_ick); - clk_enable(omap->usbhost1_48m_fck); - clk_enable(omap->usbhost2_120m_fck); - } else { - clk_disable(omap->usbhost2_120m_fck); - clk_disable(omap->usbhost1_48m_fck); - clk_disable(omap->usbhost_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbtll_ick); - } -} - static int ohci_omap3_init(struct usb_hcd *hcd) { dev_dbg(hcd->self.controller, "starting OHCI controller\n"); @@ -175,7 +41,6 @@ static int ohci_omap3_init(struct usb_hcd *hcd) return ohci_init(hcd_to_ohci(hcd)); } - /*-------------------------------------------------------------------------*/ static int ohci_omap3_start(struct usb_hcd *hcd) @@ -202,325 +67,6 @@ static int ohci_omap3_start(struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ -/* - * convert the port-mode enum to a value we can use in the FSLSMODE - * field of USBTLL_CHANNEL_CONF - */ -static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) -{ - switch (mode) { - case OMAP_USBHS_PORT_MODE_UNUSED: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - return 0x0; - - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - return 0x1; - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - return 0x2; - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - return 0x3; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - return 0x4; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - return 0x5; - - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - return 0x6; - - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - return 0x7; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - return 0xA; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - return 0xB; - default: - pr_warning("Invalid port mode, using default\n"); - return 0x0; - } -} - -static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) -{ - u32 reg; - int i; - - /* Program TLL SHARED CONF */ - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; - reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION; - reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON; - ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Program each TLL channel */ - /* - * REVISIT: Only the 3-pin and 4-pin PHY modes have - * actually been tested. - */ - for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { - - /* Enable only those channels that are actually used */ - if (omap->port_mode[i] == OMAP_USBHS_PORT_MODE_UNUSED) - continue; - - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - reg |= ohci_omap3_fslsmode(omap->port_mode[i]) - << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; - reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } -} - -/* omap3_start_ohci - * - Start the TI USBHOST controller - */ -static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u32 reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI OHCI USB Controller\n"); - - /* Get all the clock handles we need */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - dev_err(omap->dev, "could not get usbhost_ick\n"); - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - - omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); - if (IS_ERR(omap->usbhost2_120m_fck)) { - dev_err(omap->dev, "could not get usbhost_120m_fck\n"); - ret = PTR_ERR(omap->usbhost2_120m_fck); - goto err_host_120m_fck; - } - - omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); - if (IS_ERR(omap->usbhost1_48m_fck)) { - dev_err(omap->dev, "could not get usbhost_48m_fck\n"); - ret = PTR_ERR(omap->usbhost1_48m_fck); - goto err_host_48m_fck; - } - - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - dev_err(omap->dev, "could not get usbtll_fck\n"); - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; - } - - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - dev_err(omap->dev, "could not get usbtll_ick\n"); - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; - } - - /* Now enable all the clocks in the correct order */ - ohci_omap3_clock_power(omap, 1); - - /* perform TLL soft reset, and wait until reset is complete */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } - } - - dev_dbg(omap->dev, "TLL reset done\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET; - - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - /* - * REVISIT: Pi_CONNECT_STATUS controls MStandby - * assertion and Swakeup generation - let us not - * worry about this for now. OMAP HWMOD framework - * might take care of this later. If not, we can - * update these registers when adding aggressive - * clock management code. - * - * For now, turn off all the Pi_CONNECT_STATUS bits - * - if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - */ - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - if (omap->es2_compatibility) { - /* - * All OHCI modes need to go through the TLL, - * unlike in the EHCI case. So use UTMI mode - * for all ports for OHCI, on ES2.x silicon - */ - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (omap->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (omap->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (omap->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - - } - ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - ohci_omap3_tll_config(omap); - - return 0; - -err_sys_status: - ohci_omap3_clock_power(omap, 0); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_put(omap->usbhost1_48m_fck); - -err_host_48m_fck: - clk_put(omap->usbhost2_120m_fck); - -err_host_120m_fck: - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset USBHOST for insmod/rmmod to work */ - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_UHHRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap3_clock_power(omap, 0); - - if (omap->usbtll_fck != NULL) { - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost1_48m_fck != NULL) { - clk_put(omap->usbhost1_48m_fck); - omap->usbhost1_48m_fck = NULL; - } - - if (omap->usbhost2_120m_fck != NULL) { - clk_put(omap->usbhost2_120m_fck); - omap->usbhost2_120m_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - static const struct hc_driver ohci_omap3_hc_driver = { .description = hcd_name, .product_desc = "OMAP3 OHCI Host Controller", @@ -580,107 +126,77 @@ static const struct hc_driver ohci_omap3_hc_driver = { */ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) { - struct usbhs_omap_board_data *pdata = pdev->dev.platform_data; - struct ohci_hcd_omap3 *omap; - struct resource *res; - struct usb_hcd *hcd; - int ret = -ENODEV; - int irq; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = NULL; + void __iomem *regs = NULL; + struct resource *res; + int ret = -ENODEV; + int irq; if (usb_disabled()) - goto err_disabled; + goto err_end; - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_byname(pdev, "ohci-irq"); + if (irq < 0) { + dev_err(dev, "OHCI irq failed\n"); + return -ENODEV; + } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ohci"); + if (!ret) { + dev_err(dev, "UHH OHCI get resource failed\n"); + return -ENOMEM; } - hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - ret = -ENOMEM; - goto err_create_hcd; + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH OHCI ioremap failed\n"); + return -ENOMEM; } - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->es2_compatibility = pdata->es2_compatibility; - omap->ohci = hcd_to_ohci(hcd); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); + hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "usb_create_hcd failed\n"); + goto err_io; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "OHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - ret = omap3_start_ohci(omap, hcd); + ret = omap_usbhs_enable(dev); if (ret) { - dev_dbg(&pdev->dev, "failed to start ohci\n"); - goto err_start; + dev_dbg(dev, "failed to start ohci\n"); + goto err_end; } - ohci_hcd_init(omap->ohci); + ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_dbg(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } return 0; err_add_hcd: - omap3_stop_ohci(omap, hcd); - -err_start: - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); + omap_usbhs_disable(dev); -err_ioremap: +err_end: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_pdata: -err_disabled: +err_io: + iounmap(regs); + return ret; } @@ -699,24 +215,20 @@ err_disabled: */ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); - usb_remove_hcd(hcd); - omap3_stop_ohci(omap, hcd); iounmap(hcd->regs); - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + usb_remove_hcd(hcd); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); return 0; } static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); |