diff options
| -rw-r--r-- | arch/arm/configs/u8500_defconfig | 59 | ||||
| -rw-r--r-- | arch/arm/configs/vexpress_defconfig | 140 | ||||
| -rw-r--r-- | arch/arm/kernel/etm.c | 4 | ||||
| -rw-r--r-- | drivers/amba/bus.c | 348 | ||||
| -rw-r--r-- | drivers/char/hw_random/nomadik-rng.c | 2 | ||||
| -rw-r--r-- | drivers/dma/amba-pl08x.c | 2 | ||||
| -rw-r--r-- | drivers/dma/pl330.c | 2 | ||||
| -rw-r--r-- | drivers/gpio/pl061.c | 2 | ||||
| -rw-r--r-- | drivers/input/serio/ambakmi.c | 3 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.c | 348 | ||||
| -rw-r--r-- | drivers/mmc/host/mmci.h | 15 | ||||
| -rw-r--r-- | drivers/rtc/rtc-pl030.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-pl031.c | 2 | ||||
| -rw-r--r-- | drivers/spi/amba-pl022.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl010.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 513 | ||||
| -rw-r--r-- | drivers/video/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/video/amba-clcd.c | 2 | ||||
| -rw-r--r-- | drivers/video/cyber2000fb.c | 263 | ||||
| -rw-r--r-- | drivers/video/cyber2000fb.h | 16 | ||||
| -rw-r--r-- | drivers/watchdog/sp805_wdt.c | 2 | ||||
| -rw-r--r-- | include/linux/amba/bus.h | 8 | ||||
| -rw-r--r-- | include/linux/amba/mmci.h | 17 | ||||
| -rw-r--r-- | sound/arm/aaci.c | 285 | ||||
| -rw-r--r-- | sound/arm/aaci.h | 9 |
25 files changed, 1710 insertions, 356 deletions
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 52d86c4485b..a5cce242a77 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -1,7 +1,6 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y @@ -13,43 +12,89 @@ CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y CONFIG_MACH_U5500=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PHONET=y +CONFIG_PHONET_PIPECTRLR=y +# CONFIG_WIRELESS is not set +CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 -# CONFIG_MISC_DEVICES is not set +CONFIG_MISC_DEVICES=y +CONFIG_AB8500_PWM=y +CONFIG_SENSORS_BH1780=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_NOMADIK=y +CONFIG_KEYBOARD_STMPE=y +CONFIG_KEYBOARD_TC3589X=y # CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_BU21013=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_NOMADIK=y +CONFIG_I2C=y +CONFIG_I2C_NOMADIK=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_GPIO_STMPE=y +CONFIG_GPIO_TC3589X=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_MFD_STMPE=y +CONFIG_MFD_TC3589X=y +CONFIG_AB8500_CORE=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LP5521=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AB8500=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_STE_DMA40=y +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y -CONFIG_INOTIFY=y +CONFIG_EXT3_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set @@ -58,5 +103,3 @@ CONFIG_DEBUG_INFO=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -CONFIG_CRC_T10DIF=m -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig new file mode 100644 index 00000000000..f2de51f0bd1 --- /dev/null +++ b/arch/arm/configs/vexpress_defconfig @@ -0,0 +1,140 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CPUSETS=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CA9X4=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SMP=y +CONFIG_VMSPLIT_2G=y +CONFIG_HOTPLUG_CPU=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_MISC_DEVICES=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_SATA_PMP is not set +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARMAACI=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 11db62806a1..052b509e2d5 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -338,7 +338,7 @@ static struct miscdevice etb_miscdev = { .fops = &etb_fops, }; -static int __init etb_probe(struct amba_device *dev, struct amba_id *id) +static int __init etb_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; @@ -530,7 +530,7 @@ static ssize_t trace_mode_store(struct kobject *kobj, static struct kobj_attribute trace_mode_attr = __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store); -static int __init etm_probe(struct amba_device *dev, struct amba_id *id) +static int __init etm_probe(struct amba_device *dev, const struct amba_id *id) { struct tracectx *t = &tracer; int ret = 0; diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index e7df019d29d..6d2bb2524b6 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -13,16 +13,17 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/amba/bus.h> #include <asm/irq.h> #include <asm/sizes.h> -#define to_amba_device(d) container_of(d, struct amba_device, dev) #define to_amba_driver(d) container_of(d, struct amba_driver, drv) -static struct amba_id * -amba_lookup(struct amba_id *table, struct amba_device *dev) +static const struct amba_id * +amba_lookup(const struct amba_id *table, struct amba_device *dev) { int ret = 0; @@ -57,26 +58,6 @@ static int amba_uevent(struct device *dev, struct kobj_uevent_env *env) #define amba_uevent NULL #endif -static int amba_suspend(struct device *dev, pm_message_t state) -{ - struct amba_driver *drv = to_amba_driver(dev->driver); - int ret = 0; - - if (dev->driver && drv->suspend) - ret = drv->suspend(to_amba_device(dev), state); - return ret; -} - -static int amba_resume(struct device *dev) -{ - struct amba_driver *drv = to_amba_driver(dev->driver); - int ret = 0; - - if (dev->driver && drv->resume) - ret = drv->resume(to_amba_device(dev)); - return ret; -} - #define amba_attr_func(name,fmt,arg...) \ static ssize_t name##_show(struct device *_dev, \ struct device_attribute *attr, char *buf) \ @@ -102,17 +83,330 @@ static struct device_attribute amba_dev_attrs[] = { __ATTR_NULL, }; +#ifdef CONFIG_PM_SLEEP + +static int amba_legacy_suspend(struct device *dev, pm_message_t mesg) +{ + struct amba_driver *adrv = to_amba_driver(dev->driver); + struct amba_device *adev = to_amba_device(dev); + int ret = 0; + + if (dev->driver && adrv->suspend) + ret = adrv->suspend(adev, mesg); + + return ret; +} + +static int amba_legacy_resume(struct device *dev) +{ + struct amba_driver *adrv = to_amba_driver(dev->driver); + struct amba_device *adev = to_amba_device(dev); + int ret = 0; + + if (dev->driver && adrv->resume) + ret = adrv->resume(adev); + + return ret; +} + +static int amba_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm && drv->pm->prepare) + ret = drv->pm->prepare(dev); + + return ret; +} + +static void amba_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#else /* !CONFIG_PM_SLEEP */ + +#define amba_pm_prepare NULL +#define amba_pm_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + +#ifdef CONFIG_SUSPEND + +static int amba_pm_suspend(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend) + ret = drv->pm->suspend(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int amba_pm_suspend_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->suspend_noirq) + ret = drv->pm->suspend_noirq(dev); + } + + return ret; +} + +static int amba_pm_resume(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume) + ret = drv->pm->resume(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_resume_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->resume_noirq) + ret = drv->pm->resume_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_SUSPEND */ + +#define amba_pm_suspend NULL +#define amba_pm_resume NULL +#define amba_pm_suspend_noirq NULL +#define amba_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int amba_pm_freeze(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze) + ret = drv->pm->freeze(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_FREEZE); + } + + return ret; +} + +static int amba_pm_freeze_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze_noirq) + ret = drv->pm->freeze_noirq(dev); + } + + return ret; +} + +static int amba_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw) + ret = drv->pm->thaw(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_thaw_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->thaw_noirq) + ret = drv->pm->thaw_noirq(dev); + } + + return ret; +} + +static int amba_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff) + ret = drv->pm->poweroff(dev); + } else { + ret = amba_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int amba_pm_poweroff_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->poweroff_noirq) + ret = drv->pm->poweroff_noirq(dev); + } + + return ret; +} + +static int amba_pm_restore(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore) + ret = drv->pm->restore(dev); + } else { + ret = amba_legacy_resume(dev); + } + + return ret; +} + +static int amba_pm_restore_noirq(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->restore_noirq) + ret = drv->pm->restore_noirq(dev); + } + + return ret; +} + +#else /* !CONFIG_HIBERNATION */ + +#define amba_pm_freeze NULL +#define amba_pm_thaw NULL +#define amba_pm_poweroff NULL +#define amba_pm_restore NULL +#define amba_pm_freeze_noirq NULL +#define amba_pm_thaw_noirq NULL +#define amba_pm_poweroff_noirq NULL +#define amba_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +#ifdef CONFIG_PM + +static const struct dev_pm_ops amba_pm = { + .prepare = amba_pm_prepare, + .complete = amba_pm_complete, + .suspend = amba_pm_suspend, + .resume = amba_pm_resume, + .freeze = amba_pm_freeze, + .thaw = amba_pm_thaw, + .poweroff = amba_pm_poweroff, + .restore = amba_pm_restore, + .suspend_noirq = amba_pm_suspend_noirq, + .resume_noirq = amba_pm_resume_noirq, + .freeze_noirq = amba_pm_freeze_noirq, + .thaw_noirq = amba_pm_thaw_noirq, + .poweroff_noirq = amba_pm_poweroff_noirq, + .restore_noirq = amba_pm_restore_noirq, + SET_RUNTIME_PM_OPS( + pm_generic_runtime_suspend, + pm_generic_runtime_resume, + pm_generic_runtime_idle + ) +}; + +#define AMBA_PM (&amba_pm) + +#else /* !CONFIG_PM */ + +#define AMBA_PM NULL + +#endif /* !CONFIG_PM */ + /* * Primecells are part of the Advanced Microcontroller Bus Architecture, * so we call the bus "amba". */ -static struct bus_type amba_bustype = { +struct bus_type amba_bustype = { .name = "amba", .dev_attrs = amba_dev_attrs, .match = amba_match, .uevent = amba_uevent, - .suspend = amba_suspend, - .resume = amba_resume, + .pm = AMBA_PM, }; static int __init amba_init(void) @@ -188,7 +482,7 @@ static int amba_probe(struct device *dev) { struct amba_device *pcdev = to_amba_device(dev); struct amba_driver *pcdrv = to_amba_driver(dev->driver); - struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); + const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); int ret; do { diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c index a348c7e9aa0..dd1d143eb8e 100644 --- a/drivers/char/hw_random/nomadik-rng.c +++ b/drivers/char/hw_random/nomadik-rng.c @@ -39,7 +39,7 @@ static struct hwrng nmk_rng = { .read = nmk_rng_read, }; -static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id) +static int nmk_rng_probe(struct amba_device *dev, const struct amba_id *id) { void __iomem *base; int ret; diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 07bca4970e5..e6d7228b147 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1845,7 +1845,7 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) } #endif -static int pl08x_probe(struct amba_device *adev, struct amba_id *id) +static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) { struct pl08x_driver_data *pl08x; const struct vendor_data *vd = id->data; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 7c50f6dfd3f..6abe1ec1f2c 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -657,7 +657,7 @@ static irqreturn_t pl330_irq_handler(int irq, void *data) } static int __devinit -pl330_probe(struct amba_device *adev, struct amba_id *id) +pl330_probe(struct amba_device *adev, const struct amba_id *id) { struct dma_pl330_platdata *pdat; struct dma_pl330_dmac *pdmac; diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c index 2975d22daff..838ddbdf90c 100644 --- a/drivers/gpio/pl061.c +++ b/drivers/gpio/pl061.c @@ -232,7 +232,7 @@ static void pl061_irq_handler(unsigned irq, struct irq_desc *desc) desc->irq_data.chip->irq_unmask(&desc->irq_data); } -static int pl061_probe(struct amba_device *dev, struct amba_id *id) +static int pl061_probe(struct amba_device *dev, const struct amba_id *id) { struct pl061_platform_data *pdata; struct pl061_gpio *chip; diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 92563a681d6..12abc50508e 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,8 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int __devinit amba_kmi_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit amba_kmi_probe(struct amba_device *dev, + const struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2d6de3e03e2..5bbb87d1025 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -2,7 +2,7 @@ * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. - * Copyright (C) 2010 ST-Ericsson AB. + * Copyright (C) 2010 ST-Ericsson SA * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -25,8 +25,10 @@ #include <linux/clk.h> #include <linux/scatterlist.h> #include <linux/gpio.h> -#include <linux/amba/mmci.h> #include <linux/regulator/consumer.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/amba/mmci.h> #include <asm/div64.h> #include <asm/io.h> @@ -142,9 +144,6 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) host->mrq = NULL; host->cmd = NULL; - if (mrq->data) - mrq->data->bytes_xfered = host->data_xfered; - /* * Need to drop the host lock here; mmc_request_done may call * back into the driver... @@ -189,6 +188,248 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); } +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +static void __devinit mmci_dma_setup(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + const char *rxname, *txname; + dma_cap_mask_t mask; + + if (!plat || !plat->dma_filter) { + dev_info(mmc_dev(host->mmc), "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it is + * is specified but cannot be located, DMA will be disabled. + */ + if (plat->dma_rx_param) { + host->dma_rx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_rx_param); + /* E.g if no DMA hardware is present */ + if (!host->dma_rx_channel) + dev_err(mmc_dev(host->mmc), "no RX DMA channel\n"); + } + + if (plat->dma_tx_param) { + host->dma_tx_channel = dma_request_channel(mask, + plat->dma_filter, + plat->dma_tx_param); + if (!host->dma_tx_channel) + dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n"); + } else { + host->dma_tx_channel = host->dma_rx_channel; + } + + if (host->dma_rx_channel) + rxname = dma_chan_name(host->dma_rx_channel); + else + rxname = "none"; + + if (host->dma_tx_channel) + txname = dma_chan_name(host->dma_tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (host->dma_tx_channel) { + struct device *dev = host->dma_tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (host->dma_rx_channel) { + struct device *dev = host->dma_rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } +} + +/* + * This is used in __devinit or __devexit so inline it + * so it can be discarded. + */ +static inline void mmci_dma_release(struct mmci_host *host) +{ + struct mmci_platform_data *plat = host->plat; + + if (host->dma_rx_channel) + dma_release_channel(host->dma_rx_channel); + if (host->dma_tx_channel && plat->dma_tx_param) + dma_release_channel(host->dma_tx_channel); + host->dma_rx_channel = host->dma_tx_channel = NULL; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct dma_chan *chan = host->dma_current; + enum dma_data_direction dir; + u32 status; + int i; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dmaengine_terminate_all(chan); + if (!data->error) + data->error = -EIO; + } + + if (data->flags & MMC_DATA_WRITE) { + dir = DMA_TO_DEVICE; + } else { + dir = DMA_FROM_DEVICE; + } + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, dir); + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } +} + +static void mmci_dma_data_error(struct mmci_host *host) +{ + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(host->dma_current); +} + +static int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + }; + struct mmc_data *data = host->data; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + int nr_sg; + + host->dma_current = NULL; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_FROM_DEVICE; + chan = host->dma_rx_channel; + } else { + conf.direction = DMA_TO_DEVICE; + chan = host->dma_tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (host->size <= variant->fifosize) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, conf.direction); + if (nr_sg == 0) + return -EINVAL; + + dmaengine_slave_config(chan, &conf); + desc = device->device_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, DMA_CTRL_ACK); + if (!desc) + goto unmap_exit; + + /* Okay, go for it. */ + host->dma_current = chan; + + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + dmaengine_submit(desc); + dma_async_issue_pending(chan); + + datactrl |= MCI_DPSM_DMAENABLE; + + /* Trigger the DMA transfer */ + writel(datactrl, host->base + MMCIDATACTRL); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; + +unmap_exit: + dmaengine_terminate_all(chan); + dma_unmap_sg(device->dev, data->sg, data->sg_len, conf.direction); + return -ENOMEM; +} +#else +/* Blank functions if the DMA engine is not available */ +static inline void mmci_dma_setup(struct mmci_host *host) +{ +} + +static inline void mmci_dma_release(struct mmci_host *host) +{ +} + +static inline void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ +} + +static inline void mmci_dma_data_error(struct mmci_host *host) +{ +} + +static inline int mmci_dma_start_data(struct mmci_host *host, unsigned int datactrl) +{ + return -ENOSYS; +} +#endif + static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) { struct variant_data *variant = host->variant; @@ -202,9 +443,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; - host->data_xfered = 0; - - mmci_init_sg(host, data); + data->bytes_xfered = 0; clks = (unsigned long long)data->timeout_ns * host->cclk; do_div(clks, 1000000000UL); @@ -219,15 +458,29 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) BUG_ON(1 << blksz_bits != data->blksz); datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; - if (data->flags & MMC_DATA_READ) { + + if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start_data(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { irqmask = MCI_RXFIFOHALFFULLMASK; /* - * If we have less than a FIFOSIZE of bytes to transfer, - * trigger a PIO interrupt as soon as any data is available. + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. */ - if (host->size < variant->fifosize) + if (host->size < variant->fifohalfsize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -283,49 +536,51 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { u32 remain, success; - /* Calculate how far we are into the transfer */ + /* Terminate the DMA transfer */ + if (dma_inprogress(host)) + mmci_dma_data_error(host); + + /* + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. + */ remain = readl(host->base + MMCIDATACNT); success = data->blksz * data->blocks - remain; - dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status, success); if (status & MCI_DATACRCFAIL) { /* Last block was not successful */ - host->data_xfered = round_down(success - 1, data->blksz); + success -= 1; data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { - host->data_xfered = round_down(success, data->blksz); data->error = -ETIMEDOUT; - } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { - host->data_xfered = round_down(success, data->blksz); + } else if (status & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; data->error = -EIO; } - - /* - * We hit an error condition. Ensure that any data - * partially written to a page is properly coherent. - */ - if (data->flags & MMC_DATA_READ) { - struct sg_mapping_iter *sg_miter = &host->sg_miter; - unsigned long flags; - - local_irq_save(flags); - if (sg_miter_next(sg_miter)) { - flush_dcache_page(sg_miter->page); - sg_miter_stop(sg_miter); - } - local_irq_restore(flags); - } + data->bytes_xfered = round_down(success, data->blksz); } if (status & MCI_DATABLOCKEND) dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); if (status & MCI_DATAEND || data->error) { + if (dma_inprogress(host)) + mmci_dma_unmap(host, data); mmci_stop_data(host); if (!data->error) /* The error clause is handled above, success! */ - host->data_xfered += data->blksz * data->blocks; + data->bytes_xfered = data->blksz * data->blocks; if (!data->stop) { mmci_request_end(host, data->mrq); @@ -498,9 +753,6 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) if (remain) break; - if (status & MCI_RXACTIVE) - flush_dcache_page(sg_miter->page); - status = readl(base + MMCISTATUS); } while (1); @@ -509,10 +761,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) local_irq_restore(flags); /* - * If we're nearing the end of the read, switch to - * "any data available" mode. + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. */ - if (status & MCI_RXACTIVE && host->size < variant->fifosize) + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /* @@ -713,7 +965,8 @@ static const struct mmc_host_ops mmci_ops = { .get_cd = mmci_get_cd, }; -static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit mmci_probe(struct amba_device *dev, + const struct amba_id *id) { struct mmci_platform_data *plat = dev->dev.platform_data; struct variant_data *variant = id->data; @@ -776,6 +1029,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", host->mclk); } + host->phybase = dev->res.start; host->base = ioremap(dev->res.start, resource_size(&dev->res)); if (!host->base) { ret = -ENOMEM; @@ -903,9 +1157,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) amba_set_drvdata(dev, mmc); - dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n", - mmc_hostname(mmc), amba_part(dev), amba_rev(dev), - (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); + + mmci_dma_setup(host); mmc_add_host(mmc); @@ -952,6 +1209,7 @@ static int __devexit mmci_remove(struct amba_device *dev) writel(0, host->base + MMCICOMMAND); writel(0, host->base + MMCIDATACTRL); + mmci_dma_release(host); free_irq(dev->irq[0], host); if (!host->singleirq) free_irq(dev->irq[1], host); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index c1df7b82d36..ec9a7bc6d0d 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -148,8 +148,10 @@ struct clk; struct variant_data; +struct dma_chan; struct mmci_host { + phys_addr_t phybase; void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; @@ -161,8 +163,6 @@ struct mmci_host { int gpio_cd_irq; bool singleirq; - unsigned int data_xfered; - spinlock_t lock; unsigned int mclk; @@ -181,5 +181,16 @@ struct mmci_host { struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; + +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + struct dma_chan *dma_current; + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + +#define dma_inprogress(host) ((host)->dma_current) +#else +#define dma_inprogress(host) (0) +#endif }; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index d554368c9f5..1d28d4451da 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -97,7 +97,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, struct amba_id *id) +static int pl030_probe(struct amba_device *dev, const struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index d829ea63c4f..ff1b84bd9bb 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -307,7 +307,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, struct amba_id *id) +static int pl031_probe(struct amba_device *adev, const struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 71a1219a995..95e58c70a2c 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -2021,7 +2021,7 @@ static void pl022_cleanup(struct spi_device *spi) static int __devinit -pl022_probe(struct amba_device *adev, struct amba_id *id) +pl022_probe(struct amba_device *adev, const struct amba_id *id) { struct device *dev = &adev->dev; struct pl022_ssp_controller *platform_info = adev->dev.platform_data; diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index 2904aa04412..d742dd2c525 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -676,7 +676,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl010_probe(struct amba_device *dev, struct amba_id *id) +static int pl010_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e76d7d00012..57731e87008 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -96,6 +96,22 @@ static struct vendor_data vendor_st = { }; /* Deals with DMA transactions */ + +struct pl011_sgbuf { + struct scatterlist sg; + char *buf; +}; + +struct pl011_dmarx_data { + struct dma_chan *chan; + struct completion complete; + bool use_buf_b; + struct pl011_sgbuf sgbuf_a; + struct pl011_sgbuf sgbuf_b; + dma_cookie_t cookie; + bool running; +}; + struct pl011_dmatx_data { struct dma_chan *chan; struct scatterlist sg; @@ -120,12 +136,70 @@ struct uart_amba_port { char type[12]; #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ - bool using_dma; + bool using_tx_dma; + bool using_rx_dma; + struct pl011_dmarx_data dmarx; struct pl011_dmatx_data dmatx; #endif }; /* + * Reads up to 256 characters from the FIFO or until it's empty and + * inserts them into the TTY layer. Returns the number of characters + * read from the FIFO. + */ +static int pl011_fifo_to_tty(struct uart_amba_port *uap) +{ + u16 status, ch; + unsigned int flag, max_count = 256; + int fifotaken = 0; + + while (max_count--) { + status = readw(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_RXFE) + break; + + /* Take chars from the FIFO and update status */ + ch = readw(uap->port.membase + UART01x_DR) | + UART_DUMMY_DR_RX; + flag = TTY_NORMAL; + uap->port.icount.rx++; + fifotaken++; + + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + continue; + } else if (ch & UART011_DR_PE) + uap->port.icount.parity++; + else if (ch & UART011_DR_FE) + uap->port.icount.frame++; + if (ch & UART011_DR_OE) + uap->port.icount.overrun++; + + ch &= uap->port.read_status_mask; + + if (ch & UART011_DR_BE) + flag = TTY_BREAK; + else if (ch & UART011_DR_PE) + flag = TTY_PARITY; + else if (ch & UART011_DR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch & 255)) + continue; + + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); + } + + return fifotaken; +} + + +/* * All the DMA operation mode stuff goes inside this ifdef. * This assumes that you have a generic DMA device interface, * no custom DMA interfaces are supported. @@ -134,6 +208,31 @@ struct uart_amba_port { #define PL011_DMA_BUFFER_SIZE PAGE_SIZE +static int pl011_sgbuf_init(struct dma_chan *chan, struct pl011_sgbuf *sg, + enum dma_data_direction dir) +{ + sg->buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); + if (!sg->buf) + return -ENOMEM; + + sg_init_one(&sg->sg, sg->buf, PL011_DMA_BUFFER_SIZE); + + if (dma_map_sg(chan->device->dev, &sg->sg, 1, dir) != 1) { + kfree(sg->buf); + return -EINVAL; + } + return 0; +} + +static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, + enum dma_data_direction dir) +{ + if (sg->buf) { + dma_unmap_sg(chan->device->dev, &sg->sg, 1, dir); + kfree(sg->buf); + } +} + static void pl011_dma_probe_initcall(struct uart_amba_port *uap) { /* DMA is the sole user of the platform data right now */ @@ -153,7 +252,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) return; } - /* Try to acquire a generic DMA engine slave channel */ + /* Try to acquire a generic DMA engine slave TX channel */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); @@ -168,6 +267,28 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) dev_info(uap->port.dev, "DMA channel TX %s\n", dma_chan_name(uap->dmatx.chan)); + + /* Optionally make use of an RX channel as well */ + if (plat->dma_rx_param) { + struct dma_slave_config rx_conf = { + .src_addr = uap->port.mapbase + UART01x_DR, + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .direction = DMA_FROM_DEVICE, + .src_maxburst = uap->fifosize >> 1, + }; + + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); + if (!chan) { + dev_err(uap->port.dev, "no RX DMA channel!\n"); + return; + } + + dmaengine_slave_config(chan, &rx_conf); + uap->dmarx.chan = chan; + + dev_info(uap->port.dev, "DMA channel RX %s\n", + dma_chan_name(uap->dmarx.chan)); + } } #ifndef MODULE @@ -219,9 +340,10 @@ static void pl011_dma_remove(struct uart_amba_port *uap) /* TODO: remove the initcall if it has not yet executed */ if (uap->dmatx.chan) dma_release_channel(uap->dmatx.chan); + if (uap->dmarx.chan) + dma_release_channel(uap->dmarx.chan); } - /* Forward declare this for the refill routine */ static int pl011_dma_tx_refill(struct uart_amba_port *uap); @@ -380,7 +502,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) */ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) { - if (!uap->using_dma) + if (!uap->using_tx_dma) return false; /* @@ -432,7 +554,7 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) { u16 dmacr; - if (!uap->using_dma) + if (!uap->using_tx_dma) return false; if (!uap->port.x_char) { @@ -492,7 +614,7 @@ static void pl011_dma_flush_buffer(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; - if (!uap->using_dma) + if (!uap->using_tx_dma) return; /* Avoid deadlock with the DMA engine callback */ @@ -508,9 +630,219 @@ static void pl011_dma_flush_buffer(struct uart_port *port) } } +static void pl011_dma_rx_callback(void *data); + +static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) +{ + struct dma_chan *rxchan = uap->dmarx.chan; + struct dma_device *dma_dev; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_async_tx_descriptor *desc; + struct pl011_sgbuf *sgbuf; + + if (!rxchan) + return -EIO; + + /* Start the RX DMA job */ + sgbuf = uap->dmarx.use_buf_b ? + &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; + dma_dev = rxchan->device; + desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + /* + * If the DMA engine is busy and cannot prepare a + * channel, no big deal, the driver will fall back + * to interrupt mode as a result of this error code. + */ + if (!desc) { + uap->dmarx.running = false; + dmaengine_terminate_all(rxchan); + return -EBUSY; + } + + /* Some data to go along to the callback */ + desc->callback = pl011_dma_rx_callback; + desc->callback_param = uap; + dmarx->cookie = dmaengine_submit(desc); + dma_async_issue_pending(rxchan); + + uap->dmacr |= UART011_RXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->dmarx.running = true; + + uap->im &= ~UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + + return 0; +} + +/* + * This is called when either the DMA job is complete, or + * the FIFO timeout interrupt occurred. This must be called + * with the port spinlock uap->port.lock held. + */ +static void pl011_dma_rx_chars(struct uart_amba_port *uap, + u32 pending, bool use_buf_b, + bool readfifo) +{ + struct tty_struct *tty = uap->port.state->port.tty; + struct pl011_sgbuf *sgbuf = use_buf_b ? + &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; + struct device *dev = uap->dmarx.chan->device->dev; + int dma_count = 0; + u32 fifotaken = 0; /* only used for vdbg() */ + + /* Pick everything from the DMA first */ + if (pending) { + /* Sync in buffer */ + dma_sync_sg_for_cpu(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE); + + /* + * First take all chars in the DMA pipe, then look in the FIFO. + * Note that tty_insert_flip_buf() tries to take as many chars + * as it can. + */ + dma_count = tty_insert_flip_string(uap->port.state->port.tty, + sgbuf->buf, pending); + + /* Return buffer to device */ + dma_sync_sg_for_device(dev, &sgbuf->sg, 1, DMA_FROM_DEVICE); + + uap->port.icount.rx += dma_count; + if (dma_count < pending) + dev_warn(uap->port.dev, + "couldn't insert all characters (TTY is full?)\n"); + } + + /* + * Only continue with trying to read the FIFO if all DMA chars have + * been taken first. + */ + if (dma_count == pending && readfifo) { + /* Clear any error flags */ + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, + uap->port.membase + UART011_ICR); + + /* + * If we read all the DMA'd characters, and we had an + * incomplete buffer, that could be due to an rx error, or + * maybe we just timed out. Read any pending chars and check + * the error status. + * + * Error conditions will only occur in the FIFO, these will + * trigger an immediate interrupt and stop the DMA job, so we + * will always find the error in the FIFO, never in the DMA + * buffer. + */ + fifotaken = pl011_fifo_to_tty(uap); + } + + spin_unlock(&uap->port.lock); + dev_vdbg(uap->port.dev, + "Took %d chars from DMA buffer and %d chars from the FIFO\n", + dma_count, fifotaken); + tty_flip_buffer_push(tty); + spin_lock(&uap->port.lock); +} + +static void pl011_dma_rx_irq(struct uart_amba_port *uap) +{ + struct pl011_dmarx_data *dmarx = &uap->dmarx; + struct dma_chan *rxchan = dmarx->chan; + struct pl011_sgbuf *sgbuf = dmarx->use_buf_b ? + &dmarx->sgbuf_b : &dmarx->sgbuf_a; + size_t pending; + struct dma_tx_state state; + enum dma_status dmastat; + + /* + * Pause the transfer so we can trust the current counter, + * do this before we pause the PL011 block, else we may + * overflow the FIFO. + */ + if (dmaengine_pause(rxchan)) + dev_err(uap->port.dev, "unable to pause DMA transfer\n"); + dmastat = rxchan->device->device_tx_status(rxchan, + dmarx->cookie, &state); + if (dmastat != DMA_PAUSED) + dev_err(uap->port.dev, "unable to pause DMA transfer\n"); + + /* Disable RX DMA - incoming data will wait in the FIFO */ + uap->dmacr &= ~UART011_RXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->dmarx.running = false; + + pending = sgbuf->sg.length - state.residue; + BUG_ON(pending > PL011_DMA_BUFFER_SIZE); + /* Then we terminate the transfer - we now know our residue */ + dmaengine_terminate_all(rxchan); + + /* + * This will take the chars we have so far and insert + * into the framework. + */ + pl011_dma_rx_chars(uap, pending, dmarx->use_buf_b, true); + + /* Switch buffer & re-trigger DMA job */ + dmarx->use_buf_b = !dmarx->use_buf_b; + if (pl011_dma_rx_trigger_dma(uap)) { + dev_dbg(uap->port.dev, "could not retrigger RX DMA job " + "fall back to interrupt mode\n"); + uap->im |= UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } +} + +static void pl011_dma_rx_callback(void *data) +{ + struct uart_amba_port *uap = data; + struct pl011_dmarx_data *dmarx = &uap->dmarx; + bool lastbuf = dmarx->use_buf_b; + int ret; + + /* + * This completion interrupt occurs typically when the + * RX buffer is totally stuffed but no timeout has yet + * occurred. When that happens, we just want the RX + * routine to flush out the secondary DMA buffer while + * we immediately trigger the next DMA job. + */ + spin_lock_irq(&uap->port.lock); + uap->dmarx.running = false; + dmarx->use_buf_b = !lastbuf; + ret = pl011_dma_rx_trigger_dma(uap); + + pl011_dma_rx_chars(uap, PL011_DMA_BUFFER_SIZE, lastbuf, false); + spin_unlock_irq(&uap->port.lock); + /* + * Do this check after we picked the DMA chars so we don't + * get some IRQ immediately from RX. + */ + if (ret) { + dev_dbg(uap->port.dev, "could not retrigger RX DMA job " + "fall back to interrupt mode\n"); + uap->im |= UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } +} + +/* + * Stop accepting received characters, when we're shutting down or + * suspending this port. + * Locking: called with port lock held and IRQs disabled. + */ +static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) +{ + /* FIXME. Just disable the DMA enable */ + uap->dmacr &= ~UART011_RXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); +} static void pl011_dma_startup(struct uart_amba_port *uap) { + int ret; + if (!uap->dmatx.chan) return; @@ -525,8 +857,33 @@ static void pl011_dma_startup(struct uart_amba_port *uap) /* The DMA buffer is now the FIFO the TTY subsystem can use */ uap->port.fifosize = PL011_DMA_BUFFER_SIZE; - uap->using_dma = true; + uap->using_tx_dma = true; + + if (!uap->dmarx.chan) + goto skip_rx; + + /* Allocate and map DMA RX buffers */ + ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_a, + DMA_FROM_DEVICE); + if (ret) { + dev_err(uap->port.dev, "failed to init DMA %s: %d\n", + "RX buffer A", ret); + goto skip_rx; + } + + ret = pl011_sgbuf_init(uap->dmarx.chan, &uap->dmarx.sgbuf_b, + DMA_FROM_DEVICE); + if (ret) { + dev_err(uap->port.dev, "failed to init DMA %s: %d\n", + "RX buffer B", ret); + pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, + DMA_FROM_DEVICE); + goto skip_rx; + } + uap->using_rx_dma = true; + +skip_rx: /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; writew(uap->dmacr, uap->port.membase + UART011_DMACR); @@ -539,11 +896,17 @@ static void pl011_dma_startup(struct uart_amba_port *uap) if (uap->vendor->dma_threshold) writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, uap->port.membase + ST_UART011_DMAWM); + + if (uap->using_rx_dma) { + if (pl011_dma_rx_trigger_dma(uap)) + dev_dbg(uap->port.dev, "could not trigger initial " + "RX DMA job, fall back to interrupt mode\n"); + } } static void pl011_dma_shutdown(struct uart_amba_port *uap) { - if (!uap->using_dma) + if (!(uap->using_tx_dma || uap->using_rx_dma)) return; /* Disable RX and TX DMA */ @@ -555,19 +918,39 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) writew(uap->dmacr, uap->port.membase + UART011_DMACR); spin_unlock_irq(&uap->port.lock); - /* In theory, this should already be done by pl011_dma_flush_buffer */ - dmaengine_terminate_all(uap->dmatx.chan); - if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); - uap->dmatx.queued = false; + if (uap->using_tx_dma) { + /* In theory, this should already be done by pl011_dma_flush_buffer */ + dmaengine_terminate_all(uap->dmatx.chan); + if (uap->dmatx.queued) { + dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + } + + kfree(uap->dmatx.buf); + uap->using_tx_dma = false; } - kfree(uap->dmatx.buf); + if (uap->using_rx_dma) { + dmaengine_terminate_all(uap->dmarx.chan); + /* Clean up the RX DMA */ + pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_a, DMA_FROM_DEVICE); + pl011_sgbuf_free(uap->dmarx.chan, &uap->dmarx.sgbuf_b, DMA_FROM_DEVICE); + uap->using_rx_dma = false; + } +} - uap->using_dma = false; +static inline bool pl011_dma_rx_available(struct uart_amba_port *uap) +{ + return uap->using_rx_dma; } +static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) +{ + return uap->using_rx_dma && uap->dmarx.running; +} + + #else /* Blank functions if the DMA engine is not available */ static inline void pl011_dma_probe(struct uart_amba_port *uap) @@ -600,6 +983,29 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) return false; } +static inline void pl011_dma_rx_irq(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) +{ +} + +static inline int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) +{ + return -EIO; +} + +static inline bool pl011_dma_rx_available(struct uart_amba_port *uap) +{ + return false; +} + +static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) +{ + return false; +} + #define pl011_dma_flush_buffer NULL #endif @@ -630,6 +1036,8 @@ static void pl011_stop_rx(struct uart_port *port) uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); writew(uap->im, uap->port.membase + UART011_IMSC); + + pl011_dma_rx_stop(uap); } static void pl011_enable_ms(struct uart_port *port) @@ -643,51 +1051,24 @@ static void pl011_enable_ms(struct uart_port *port) static void pl011_rx_chars(struct uart_amba_port *uap) { struct tty_struct *tty = uap->port.state->port.tty; - unsigned int status, ch, flag, max_count = 256; - - status = readw(uap->port.membase + UART01x_FR); - while ((status & UART01x_FR_RXFE) == 0 && max_count--) { - ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; - flag = TTY_NORMAL; - uap->port.icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_DR_ERROR)) { - if (ch & UART011_DR_BE) { - ch &= ~(UART011_DR_FE | UART011_DR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto ignore_char; - } else if (ch & UART011_DR_PE) - uap->port.icount.parity++; - else if (ch & UART011_DR_FE) - uap->port.icount.frame++; - if (ch & UART011_DR_OE) - uap->port.icount.overrun++; - - ch &= uap->port.read_status_mask; - - if (ch & UART011_DR_BE) - flag = TTY_BREAK; - else if (ch & UART011_DR_PE) - flag = TTY_PARITY; - else if (ch & UART011_DR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&uap->port, ch & 255)) - goto ignore_char; - - uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); + pl011_fifo_to_tty(uap); - ignore_char: - status = readw(uap->port.membase + UART01x_FR); - } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); + /* + * If we were temporarily out of DMA mode for a while, + * attempt to switch back to DMA mode again. + */ + if (pl011_dma_rx_available(uap)) { + if (pl011_dma_rx_trigger_dma(uap)) { + dev_dbg(uap->port.dev, "could not trigger RX DMA job " + "fall back to interrupt mode again\n"); + uap->im |= UART011_RXIM; + } else + uap->im &= ~UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } spin_lock(&uap->port.lock); } @@ -767,8 +1148,12 @@ static irqreturn_t pl011_int(int irq, void *dev_id) UART011_RXIS), uap->port.membase + UART011_ICR); - if (status & (UART011_RTIS|UART011_RXIS)) - pl011_rx_chars(uap); + if (status & (UART011_RTIS|UART011_RXIS)) { + if (pl011_dma_rx_running(uap)) + pl011_dma_rx_irq(uap); + else + pl011_rx_chars(uap); + } if (status & (UART011_DSRMIS|UART011_DCDMIS| UART011_CTSMIS|UART011_RIMIS)) pl011_modem_status(uap); @@ -945,10 +1330,14 @@ static int pl011_startup(struct uart_port *port) pl011_dma_startup(uap); /* - * Finally, enable interrupts + * Finally, enable interrupts, only timeouts when using DMA + * if initial RX DMA job failed, start in interrupt mode + * as well. */ spin_lock_irq(&uap->port.lock); - uap->im = UART011_RXIM | UART011_RTIM; + uap->im = UART011_RTIM; + if (!pl011_dma_rx_running(uap)) + uap->im |= UART011_RXIM; writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irq(&uap->port.lock); @@ -1349,7 +1738,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl011_probe(struct amba_device *dev, struct amba_id *id) +static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 2a753f1e918..bfc62d1ee2f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -376,6 +376,24 @@ config FB_CYBER2000 Say Y if you have a NetWinder or a graphics card containing this device, otherwise say N. +config FB_CYBER2000_DDC + bool "DDC for CyberPro support" + depends on FB_CYBER2000 + select FB_DDC + default y + help + Say Y here if you want DDC support for your CyberPro graphics + card. This is only I2C bus support, driver does not use EDID. + +config FB_CYBER2000_I2C + bool "CyberPro 2000/2010/5000 I2C support" + depends on FB_CYBER2000 && I2C && ARCH_NETWINDER + select I2C_ALGOBIT + help + Enable support for the I2C video decoder interface on the + Integraphics CyberPro 20x0 and 5000 VGA chips. This is used + on the Netwinder machines for the SAA7111 video capture. + config FB_APOLLO bool depends on (FB = y) && APOLLO diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 1c2c68356ea..013c8ce5720 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -461,7 +461,7 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } -static int clcdfb_probe(struct amba_device *dev, struct amba_id *id) +static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 0c1afd13ddd..850380795b0 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c @@ -47,6 +47,8 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -61,10 +63,10 @@ struct cfb_info { struct fb_info fb; struct display_switch *dispsw; struct display *display; - struct pci_dev *dev; unsigned char __iomem *region; unsigned char __iomem *regs; u_int id; + u_int irq; int func_use_count; u_long ref_ps; @@ -88,6 +90,19 @@ struct cfb_info { u_char ramdac_powerdown; u32 pseudo_palette[16]; + + spinlock_t reg_b0_lock; + +#ifdef CONFIG_FB_CYBER2000_DDC + bool ddc_registered; + struct i2c_adapter ddc_adapter; + struct i2c_algo_bit_data ddc_algo; +#endif + +#ifdef CONFIG_FB_CYBER2000_I2C + struct i2c_adapter i2c_adapter; + struct i2c_algo_bit_data i2c_algo; +#endif }; static char *default_font = "Acorn8x8"; @@ -494,6 +509,7 @@ static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) cyber2000_attrw(0x14, 0x00, cfb); /* PLL registers */ + spin_lock(&cfb->reg_b0_lock); cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb); cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb); cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb); @@ -501,6 +517,7 @@ static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) cyber2000_grphw(0x90, 0x01, cfb); cyber2000_grphw(0xb9, 0x80, cfb); cyber2000_grphw(0xb9, 0x00, cfb); + spin_unlock(&cfb->reg_b0_lock); cfb->ramdac_ctrl = hw->ramdac; cyber2000fb_write_ramdac_ctrl(cfb); @@ -681,9 +698,9 @@ cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb, * pll_ps_calc = best_div1 / (ref_ps * best_mult) */ best_diff = 0x7fffffff; - best_mult = 32; - best_div1 = 255; - for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) { + best_mult = 2; + best_div1 = 32; + for (t_div1 = 2; t_div1 < 32; t_div1 += 1) { u_int rr, t_mult, t_pll_ps; int diff; @@ -1105,24 +1122,22 @@ void cyber2000fb_disable_extregs(struct cfb_info *cfb) } EXPORT_SYMBOL(cyber2000fb_disable_extregs); -void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var) -{ - memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo)); -} -EXPORT_SYMBOL(cyber2000fb_get_fb_var); - /* * Attach a capture/tv driver to the core CyberX0X0 driver. */ int cyber2000fb_attach(struct cyberpro_info *info, int idx) { if (int_cfb_info != NULL) { - info->dev = int_cfb_info->dev; + info->dev = int_cfb_info->fb.device; +#ifdef CONFIG_FB_CYBER2000_I2C + info->i2c = &int_cfb_info->i2c_adapter; +#else + info->i2c = NULL; +#endif info->regs = int_cfb_info->regs; + info->irq = int_cfb_info->irq; info->fb = int_cfb_info->fb.screen_base; info->fb_size = int_cfb_info->fb.fix.smem_len; - info->enable_extregs = cyber2000fb_enable_extregs; - info->disable_extregs = cyber2000fb_disable_extregs; info->info = int_cfb_info; strlcpy(info->dev_name, int_cfb_info->fb.fix.id, @@ -1141,6 +1156,183 @@ void cyber2000fb_detach(int idx) } EXPORT_SYMBOL(cyber2000fb_detach); +#ifdef CONFIG_FB_CYBER2000_DDC + +#define DDC_REG 0xb0 +#define DDC_SCL_OUT (1 << 0) +#define DDC_SDA_OUT (1 << 4) +#define DDC_SCL_IN (1 << 2) +#define DDC_SDA_IN (1 << 6) + +static void cyber2000fb_enable_ddc(struct cfb_info *cfb) +{ + spin_lock(&cfb->reg_b0_lock); + cyber2000fb_writew(0x1bf, 0x3ce, cfb); +} + +static void cyber2000fb_disable_ddc(struct cfb_info *cfb) +{ + cyber2000fb_writew(0x0bf, 0x3ce, cfb); + spin_unlock(&cfb->reg_b0_lock); +} + + +static void cyber2000fb_ddc_setscl(void *data, int val) +{ + struct cfb_info *cfb = data; + unsigned char reg; + + cyber2000fb_enable_ddc(cfb); + reg = cyber2000_grphr(DDC_REG, cfb); + if (!val) /* bit is inverted */ + reg |= DDC_SCL_OUT; + else + reg &= ~DDC_SCL_OUT; + cyber2000_grphw(DDC_REG, reg, cfb); + cyber2000fb_disable_ddc(cfb); +} + +static void cyber2000fb_ddc_setsda(void *data, int val) +{ + struct cfb_info *cfb = data; + unsigned char reg; + + cyber2000fb_enable_ddc(cfb); + reg = cyber2000_grphr(DDC_REG, cfb); + if (!val) /* bit is inverted */ + reg |= DDC_SDA_OUT; + else + reg &= ~DDC_SDA_OUT; + cyber2000_grphw(DDC_REG, reg, cfb); + cyber2000fb_disable_ddc(cfb); +} + +static int cyber2000fb_ddc_getscl(void *data) +{ + struct cfb_info *cfb = data; + int retval; + + cyber2000fb_enable_ddc(cfb); + retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SCL_IN); + cyber2000fb_disable_ddc(cfb); + + return retval; +} + +static int cyber2000fb_ddc_getsda(void *data) +{ + struct cfb_info *cfb = data; + int retval; + + cyber2000fb_enable_ddc(cfb); + retval = !!(cyber2000_grphr(DDC_REG, cfb) & DDC_SDA_IN); + cyber2000fb_disable_ddc(cfb); + + return retval; +} + +static int __devinit cyber2000fb_setup_ddc_bus(struct cfb_info *cfb) +{ + strlcpy(cfb->ddc_adapter.name, cfb->fb.fix.id, + sizeof(cfb->ddc_adapter.name)); + cfb->ddc_adapter.owner = THIS_MODULE; + cfb->ddc_adapter.class = I2C_CLASS_DDC; + cfb->ddc_adapter.algo_data = &cfb->ddc_algo; + cfb->ddc_adapter.dev.parent = cfb->fb.device; + cfb->ddc_algo.setsda = cyber2000fb_ddc_setsda; + cfb->ddc_algo.setscl = cyber2000fb_ddc_setscl; + cfb->ddc_algo.getsda = cyber2000fb_ddc_getsda; + cfb->ddc_algo.getscl = cyber2000fb_ddc_getscl; + cfb->ddc_algo.udelay = 10; + cfb->ddc_algo.timeout = 20; + cfb->ddc_algo.data = cfb; + + i2c_set_adapdata(&cfb->ddc_adapter, cfb); + + return i2c_bit_add_bus(&cfb->ddc_adapter); +} +#endif /* CONFIG_FB_CYBER2000_DDC */ + +#ifdef CONFIG_FB_CYBER2000_I2C +static void cyber2000fb_i2c_setsda(void *data, int state) +{ + struct cfb_info *cfb = data; + unsigned int latch2; + + spin_lock(&cfb->reg_b0_lock); + latch2 = cyber2000_grphr(EXT_LATCH2, cfb); + latch2 &= EXT_LATCH2_I2C_CLKEN; + if (state) + latch2 |= EXT_LATCH2_I2C_DATEN; + cyber2000_grphw(EXT_LATCH2, latch2, cfb); + spin_unlock(&cfb->reg_b0_lock); +} + +static void cyber2000fb_i2c_setscl(void *data, int state) +{ + struct cfb_info *cfb = data; + unsigned int latch2; + + spin_lock(&cfb->reg_b0_lock); + latch2 = cyber2000_grphr(EXT_LATCH2, cfb); + latch2 &= EXT_LATCH2_I2C_DATEN; + if (state) + latch2 |= EXT_LATCH2_I2C_CLKEN; + cyber2000_grphw(EXT_LATCH2, latch2, cfb); + spin_unlock(&cfb->reg_b0_lock); +} + +static int cyber2000fb_i2c_getsda(void *data) +{ + struct cfb_info *cfb = data; + int ret; + + spin_lock(&cfb->reg_b0_lock); + ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_DAT); + spin_unlock(&cfb->reg_b0_lock); + + return ret; +} + +static int cyber2000fb_i2c_getscl(void *data) +{ + struct cfb_info *cfb = data; + int ret; + + spin_lock(&cfb->reg_b0_lock); + ret = !!(cyber2000_grphr(EXT_LATCH2, cfb) & EXT_LATCH2_I2C_CLK); + spin_unlock(&cfb->reg_b0_lock); + + return ret; +} + +static int __devinit cyber2000fb_i2c_register(struct cfb_info *cfb) +{ + strlcpy(cfb->i2c_adapter.name, cfb->fb.fix.id, + sizeof(cfb->i2c_adapter.name)); + cfb->i2c_adapter.owner = THIS_MODULE; + cfb->i2c_adapter.algo_data = &cfb->i2c_algo; + cfb->i2c_adapter.dev.parent = cfb->fb.device; + cfb->i2c_algo.setsda = cyber2000fb_i2c_setsda; + cfb->i2c_algo.setscl = cyber2000fb_i2c_setscl; + cfb->i2c_algo.getsda = cyber2000fb_i2c_getsda; + cfb->i2c_algo.getscl = cyber2000fb_i2c_getscl; + cfb->i2c_algo.udelay = 5; + cfb->i2c_algo.timeout = msecs_to_jiffies(100); + cfb->i2c_algo.data = cfb; + + return i2c_bit_add_bus(&cfb->i2c_adapter); +} + +static void cyber2000fb_i2c_unregister(struct cfb_info *cfb) +{ + i2c_del_adapter(&cfb->i2c_adapter); +} +#else +#define cyber2000fb_i2c_register(cfb) (0) +#define cyber2000fb_i2c_unregister(cfb) do { } while (0) +#endif + /* * These parameters give * 640x480, hsync 31.5kHz, vsync 60Hz @@ -1275,6 +1467,8 @@ static struct cfb_info __devinit *cyberpro_alloc_fb_info(unsigned int id, cfb->fb.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; cfb->fb.pseudo_palette = cfb->pseudo_palette; + spin_lock_init(&cfb->reg_b0_lock); + fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0); return cfb; @@ -1369,6 +1563,11 @@ static int __devinit cyberpro_common_probe(struct cfb_info *cfb) cfb->fb.fix.mmio_len = MMIO_SIZE; cfb->fb.screen_base = cfb->region; +#ifdef CONFIG_FB_CYBER2000_DDC + if (cyber2000fb_setup_ddc_bus(cfb) == 0) + cfb->ddc_registered = true; +#endif + err = -EINVAL; if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0, &cyber2000fb_default_mode, 8)) { @@ -1401,14 +1600,32 @@ static int __devinit cyberpro_common_probe(struct cfb_info *cfb) cfb->fb.var.xres, cfb->fb.var.yres, h_sync / 1000, h_sync % 1000, v_sync); - if (cfb->dev) - cfb->fb.device = &cfb->dev->dev; + err = cyber2000fb_i2c_register(cfb); + if (err) + goto failed; + err = register_framebuffer(&cfb->fb); + if (err) + cyber2000fb_i2c_unregister(cfb); failed: +#ifdef CONFIG_FB_CYBER2000_DDC + if (err && cfb->ddc_registered) + i2c_del_adapter(&cfb->ddc_adapter); +#endif return err; } +static void __devexit cyberpro_common_remove(struct cfb_info *cfb) +{ + unregister_framebuffer(&cfb->fb); +#ifdef CONFIG_FB_CYBER2000_DDC + if (cfb->ddc_registered) + i2c_del_adapter(&cfb->ddc_adapter); +#endif + cyber2000fb_i2c_unregister(cfb); +} + static void cyberpro_common_resume(struct cfb_info *cfb) { cyberpro_init_hw(cfb); @@ -1442,12 +1659,13 @@ static int __devinit cyberpro_vl_probe(void) if (!cfb) goto failed_release; - cfb->dev = NULL; + cfb->irq = -1; cfb->region = ioremap(FB_START, FB_SIZE); if (!cfb->region) goto failed_ioremap; cfb->regs = cfb->region + MMIO_OFFSET; + cfb->fb.device = NULL; cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET; cfb->fb.fix.smem_start = FB_START; @@ -1585,12 +1803,13 @@ cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (err) goto failed_regions; - cfb->dev = dev; + cfb->irq = dev->irq; cfb->region = pci_ioremap_bar(dev, 0); if (!cfb->region) goto failed_ioremap; cfb->regs = cfb->region + MMIO_OFFSET; + cfb->fb.device = &dev->dev; cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET; cfb->fb.fix.smem_start = pci_resource_start(dev, 0); @@ -1648,15 +1867,7 @@ static void __devexit cyberpro_pci_remove(struct pci_dev *dev) struct cfb_info *cfb = pci_get_drvdata(dev); if (cfb) { - /* - * If unregister_framebuffer fails, then - * we will be leaving hooks that could cause - * oopsen laying around. - */ - if (unregister_framebuffer(&cfb->fb)) - printk(KERN_WARNING "%s: danger Will Robinson, " - "danger danger! Oopsen imminent!\n", - cfb->fb.fix.id); + cyberpro_common_remove(cfb); iounmap(cfb->region); cyberpro_free_fb_info(cfb); diff --git a/drivers/video/cyber2000fb.h b/drivers/video/cyber2000fb.h index de4fc43e51c..bad69102e77 100644 --- a/drivers/video/cyber2000fb.h +++ b/drivers/video/cyber2000fb.h @@ -464,12 +464,14 @@ static void debug_printf(char *fmt, ...) struct cfb_info; struct cyberpro_info { - struct pci_dev *dev; + struct device *dev; + struct i2c_adapter *i2c; unsigned char __iomem *regs; char __iomem *fb; char dev_name[32]; unsigned int fb_size; unsigned int chip_id; + unsigned int irq; /* * The following is a pointer to be passed into the @@ -478,15 +480,6 @@ struct cyberpro_info { * is within this structure. */ struct cfb_info *info; - - /* - * Use these to enable the BM or TV registers. In an SMP - * environment, these two function pointers should only be - * called from the module_init() or module_exit() - * functions. - */ - void (*enable_extregs)(struct cfb_info *); - void (*disable_extregs)(struct cfb_info *); }; #define ID_IGA_1682 0 @@ -494,8 +487,6 @@ struct cyberpro_info { #define ID_CYBERPRO_2010 2 #define ID_CYBERPRO_5000 3 -struct fb_var_screeninfo; - /* * Note! Writing to the Cyber20x0 registers from an interrupt * routine is definitely a bad idea atm. @@ -504,4 +495,3 @@ int cyber2000fb_attach(struct cyberpro_info *info, int idx); void cyber2000fb_detach(int idx); void cyber2000fb_enable_extregs(struct cfb_info *cfb); void cyber2000fb_disable_extregs(struct cfb_info *cfb); -void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var); diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c index 9127eda2145..0a0efe713bc 100644 --- a/drivers/watchdog/sp805_wdt.c +++ b/drivers/watchdog/sp805_wdt.c @@ -278,7 +278,7 @@ static struct miscdevice sp805_wdt_miscdev = { }; static int __devinit -sp805_wdt_probe(struct amba_device *adev, struct amba_id *id) +sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id) { int ret = 0; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 9e7f259346e..fcbbe71a3cc 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -43,12 +43,12 @@ struct amba_id { struct amba_driver { struct device_driver drv; - int (*probe)(struct amba_device *, struct amba_id *); + int (*probe)(struct amba_device *, const struct amba_id *); int (*remove)(struct amba_device *); void (*shutdown)(struct amba_device *); int (*suspend)(struct amba_device *, pm_message_t); int (*resume)(struct amba_device *); - struct amba_id *id_table; + const struct amba_id *id_table; }; enum amba_vendor { @@ -56,6 +56,10 @@ enum amba_vendor { AMBA_VENDOR_ST = 0x80, }; +extern struct bus_type amba_bustype; + +#define to_amba_device(d) container_of(d, struct amba_device, dev) + #define amba_get_drvdata(d) dev_get_drvdata(&d->dev) #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p) diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index f4ee9acc972..f60227088b7 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,6 +6,9 @@ #include <linux/mmc/host.h> +/* Just some dummy forwarding */ +struct dma_chan; + /** * struct mmci_platform_data - platform configuration for the MMCI * (also known as PL180) block. @@ -27,6 +30,17 @@ * @cd_invert: true if the gpio_cd pin value is active low * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h + * @dma_filter: function used to select an apropriate RX and TX + * DMA channel to be used for DMA, if and only if you're deploying the + * generic DMA engine + * @dma_rx_param: parameter passed to the DMA allocation + * filter in order to select an apropriate RX channel. If + * there is a bidirectional RX+TX channel, then just specify + * this and leave dma_tx_param set to NULL + * @dma_tx_param: parameter passed to the DMA allocation + * filter in order to select an apropriate TX channel. If this + * is NULL the driver will attempt to use the RX channel as a + * bidirectional channel */ struct mmci_platform_data { unsigned int f_max; @@ -38,6 +52,9 @@ struct mmci_platform_data { int gpio_cd; bool cd_invert; unsigned long capabilities; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; }; #endif diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 7c1fc64cb53..d0cead38d5f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -210,6 +210,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (mask & ISR_RXINTR) { struct aaci_runtime *aacirun = &aaci->capture; + bool period_elapsed = false; void *ptr; if (!aacirun->substream || !aacirun->start) { @@ -222,15 +223,12 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) ptr = aacirun->ptr; do { - unsigned int len = aacirun->fifosz; + unsigned int len = aacirun->fifo_bytes; u32 val; if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; - aacirun->ptr = ptr; - spin_unlock(&aacirun->lock); - snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aacirun->lock); + period_elapsed = true; } if (!(aacirun->cr & CR_EN)) break; @@ -260,6 +258,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) aacirun->ptr = ptr; spin_unlock(&aacirun->lock); + + if (period_elapsed) + snd_pcm_period_elapsed(aacirun->substream); } if (mask & ISR_URINTR) { @@ -269,6 +270,7 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) if (mask & ISR_TXINTR) { struct aaci_runtime *aacirun = &aaci->playback; + bool period_elapsed = false; void *ptr; if (!aacirun->substream || !aacirun->start) { @@ -281,15 +283,12 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) ptr = aacirun->ptr; do { - unsigned int len = aacirun->fifosz; + unsigned int len = aacirun->fifo_bytes; u32 val; if (aacirun->bytes <= 0) { aacirun->bytes += aacirun->period; - aacirun->ptr = ptr; - spin_unlock(&aacirun->lock); - snd_pcm_period_elapsed(aacirun->substream); - spin_lock(&aacirun->lock); + period_elapsed = true; } if (!(aacirun->cr & CR_EN)) break; @@ -319,6 +318,9 @@ static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) aacirun->ptr = ptr; spin_unlock(&aacirun->lock); + + if (period_elapsed) + snd_pcm_period_elapsed(aacirun->substream); } } @@ -361,7 +363,7 @@ static struct snd_pcm_hardware aaci_hw_info = { /* rates are setup from the AC'97 codec */ .channels_min = 2, - .channels_max = 6, + .channels_max = 2, .buffer_bytes_max = 64 * 1024, .period_bytes_min = 256, .period_bytes_max = PAGE_SIZE, @@ -369,12 +371,46 @@ static struct snd_pcm_hardware aaci_hw_info = { .periods_max = PAGE_SIZE / 16, }; -static int __aaci_pcm_open(struct aaci *aaci, - struct snd_pcm_substream *substream, - struct aaci_runtime *aacirun) +/* + * We can support two and four channel audio. Unfortunately + * six channel audio requires a non-standard channel ordering: + * 2 -> FL(3), FR(4) + * 4 -> FL(3), FR(4), SL(7), SR(8) + * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required) + * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual) + * This requires an ALSA configuration file to correct. + */ +static int aaci_rule_channels(struct snd_pcm_hw_params *p, + struct snd_pcm_hw_rule *rule) +{ + static unsigned int channel_list[] = { 2, 4, 6 }; + struct aaci *aaci = rule->private; + unsigned int mask = 1 << 0, slots; + + /* pcms[0] is the our 5.1 PCM instance. */ + slots = aaci->ac97_bus->pcms[0].r[0].slots; + if (slots & (1 << AC97_SLOT_PCM_SLEFT)) { + mask |= 1 << 1; + if (slots & (1 << AC97_SLOT_LFE)) + mask |= 1 << 2; + } + + return snd_interval_list(hw_param_interval(p, rule->var), + ARRAY_SIZE(channel_list), channel_list, mask); +} + +static int aaci_pcm_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - int ret; + struct aaci *aaci = substream->private_data; + struct aaci_runtime *aacirun; + int ret = 0; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + aacirun = &aaci->playback; + } else { + aacirun = &aaci->capture; + } aacirun->substream = substream; runtime->private_data = aacirun; @@ -382,27 +418,37 @@ static int __aaci_pcm_open(struct aaci *aaci, runtime->hw.rates = aacirun->pcm->rates; snd_pcm_limit_hw_rates(runtime); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && - aacirun->pcm->r[1].slots) - snd_ac97_pcm_double_rate_rules(runtime); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + runtime->hw.channels_max = 6; + + /* Add rule describing channel dependency. */ + ret = snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_CHANNELS, + aaci_rule_channels, aaci, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + if (ret) + return ret; + + if (aacirun->pcm->r[1].slots) + snd_ac97_pcm_double_rate_rules(runtime); + } /* - * FIXME: ALSA specifies fifo_size in bytes. If we're in normal - * mode, each 32-bit word contains one sample. If we're in - * compact mode, each 32-bit word contains two samples, effectively - * halving the FIFO size. However, we don't know for sure which - * we'll be using at this point. We set this to the lower limit. + * ALSA wants the byte-size of the FIFOs. As we only support + * 16-bit samples, this is twice the FIFO depth irrespective + * of whether it's in compact mode or not. */ - runtime->hw.fifo_size = aaci->fifosize * 2; - - ret = request_irq(aaci->dev->irq[0], aaci_irq, IRQF_SHARED|IRQF_DISABLED, - DRIVER_NAME, aaci); - if (ret) - goto out; - - return 0; + runtime->hw.fifo_size = aaci->fifo_depth * 2; + + mutex_lock(&aaci->irq_lock); + if (!aaci->users++) { + ret = request_irq(aaci->dev->irq[0], aaci_irq, + IRQF_SHARED | IRQF_DISABLED, DRIVER_NAME, aaci); + if (ret != 0) + aaci->users--; + } + mutex_unlock(&aaci->irq_lock); - out: return ret; } @@ -418,7 +464,11 @@ static int aaci_pcm_close(struct snd_pcm_substream *substream) WARN_ON(aacirun->cr & CR_EN); aacirun->substream = NULL; - free_irq(aaci->dev->irq[0], aaci); + + mutex_lock(&aaci->irq_lock); + if (!--aaci->users) + free_irq(aaci->dev->irq[0], aaci); + mutex_unlock(&aaci->irq_lock); return 0; } @@ -444,12 +494,21 @@ static int aaci_pcm_hw_free(struct snd_pcm_substream *substream) return 0; } +/* Channel to slot mask */ +static const u32 channels_to_slotmask[] = { + [2] = CR_SL3 | CR_SL4, + [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8, + [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9, +}; + static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, - struct aaci_runtime *aacirun, struct snd_pcm_hw_params *params) { + struct aaci_runtime *aacirun = substream->runtime->private_data; + unsigned int channels = params_channels(params); + unsigned int rate = params_rate(params); + int dbl = rate > 48000; int err; - struct aaci *aaci = substream->private_data; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { @@ -457,22 +516,28 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, aacirun->pcm_open = 0; } + /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */ + if (dbl && channels != 2) + return -EINVAL; + err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params)); if (err >= 0) { - unsigned int rate = params_rate(params); - int dbl = rate > 48000; + struct aaci *aaci = substream->private_data; - err = snd_ac97_pcm_open(aacirun->pcm, rate, - params_channels(params), + err = snd_ac97_pcm_open(aacirun->pcm, rate, channels, aacirun->pcm->r[dbl].slots); aacirun->pcm_open = err == 0; aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; - aacirun->fifosz = aaci->fifosize * 4; - - if (aacirun->cr & CR_COMPACT) - aacirun->fifosz >>= 1; + aacirun->cr |= channels_to_slotmask[channels + dbl * 2]; + + /* + * fifo_bytes is the number of bytes we transfer to/from + * the FIFO, including padding. So that's x4. As we're + * in compact mode, the FIFO is half the size. + */ + aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2; } return err; @@ -483,11 +548,11 @@ static int aaci_pcm_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct aaci_runtime *aacirun = runtime->private_data; + aacirun->period = snd_pcm_lib_period_bytes(substream); aacirun->start = runtime->dma_area; aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream); aacirun->ptr = aacirun->start; - aacirun->period = - aacirun->bytes = frames_to_bytes(runtime, runtime->period_size); + aacirun->bytes = aacirun->period; return 0; } @@ -505,89 +570,6 @@ static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream) /* * Playback specific ALSA stuff */ -static const u32 channels_to_txmask[] = { - [2] = CR_SL3 | CR_SL4, - [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8, - [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9, -}; - -/* - * We can support two and four channel audio. Unfortunately - * six channel audio requires a non-standard channel ordering: - * 2 -> FL(3), FR(4) - * 4 -> FL(3), FR(4), SL(7), SR(8) - * 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required) - * FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual) - * This requires an ALSA configuration file to correct. - */ -static unsigned int channel_list[] = { 2, 4, 6 }; - -static int -aaci_rule_channels(struct snd_pcm_hw_params *p, struct snd_pcm_hw_rule *rule) -{ - struct aaci *aaci = rule->private; - unsigned int chan_mask = 1 << 0, slots; - - /* - * pcms[0] is the our 5.1 PCM instance. - */ - slots = aaci->ac97_bus->pcms[0].r[0].slots; - if (slots & (1 << AC97_SLOT_PCM_SLEFT)) { - chan_mask |= 1 << 1; - if (slots & (1 << AC97_SLOT_LFE)) - chan_mask |= 1 << 2; - } - - return snd_interval_list(hw_param_interval(p, rule->var), - ARRAY_SIZE(channel_list), channel_list, - chan_mask); -} - -static int aaci_pcm_open(struct snd_pcm_substream *substream) -{ - struct aaci *aaci = substream->private_data; - int ret; - - /* - * Add rule describing channel dependency. - */ - ret = snd_pcm_hw_rule_add(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_CHANNELS, - aaci_rule_channels, aaci, - SNDRV_PCM_HW_PARAM_CHANNELS, -1); - if (ret) - return ret; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - ret = __aaci_pcm_open(aaci, substream, &aaci->playback); - } else { - ret = __aaci_pcm_open(aaci, substream, &aaci->capture); - } - return ret; -} - -static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct aaci_runtime *aacirun = substream->runtime->private_data; - unsigned int channels = params_channels(params); - int ret; - - WARN_ON(channels >= ARRAY_SIZE(channels_to_txmask) || - !channels_to_txmask[channels]); - - ret = aaci_pcm_hw_params(substream, aacirun, params); - - /* - * Enable FIFO, compact mode, 16 bits per sample. - * FIXME: double rate slots? - */ - if (ret >= 0) - aacirun->cr |= channels_to_txmask[channels]; - - return ret; -} - static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) { u32 ie; @@ -657,27 +639,13 @@ static struct snd_pcm_ops aaci_playback_ops = { .open = aaci_pcm_open, .close = aaci_pcm_close, .ioctl = snd_pcm_lib_ioctl, - .hw_params = aaci_pcm_playback_hw_params, + .hw_params = aaci_pcm_hw_params, .hw_free = aaci_pcm_hw_free, .prepare = aaci_pcm_prepare, .trigger = aaci_pcm_playback_trigger, .pointer = aaci_pcm_pointer, }; -static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct aaci_runtime *aacirun = substream->runtime->private_data; - int ret; - - ret = aaci_pcm_hw_params(substream, aacirun, params); - if (ret >= 0) - /* Line in record: slot 3 and 4 */ - aacirun->cr |= CR_SL3 | CR_SL4; - - return ret; -} - static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) { u32 ie; @@ -774,7 +742,7 @@ static struct snd_pcm_ops aaci_capture_ops = { .open = aaci_pcm_open, .close = aaci_pcm_close, .ioctl = snd_pcm_lib_ioctl, - .hw_params = aaci_pcm_capture_hw_params, + .hw_params = aaci_pcm_hw_params, .hw_free = aaci_pcm_hw_free, .prepare = aaci_pcm_capture_prepare, .trigger = aaci_pcm_capture_trigger, @@ -941,12 +909,13 @@ static struct aaci * __devinit aaci_init_card(struct amba_device *dev) strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver)); strlcpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname)); snprintf(card->longname, sizeof(card->longname), - "%s at 0x%016llx, irq %d", - card->shortname, (unsigned long long)dev->res.start, - dev->irq[0]); + "%s PL%03x rev%u at 0x%08llx, irq %d", + card->shortname, amba_part(dev), amba_rev(dev), + (unsigned long long)dev->res.start, dev->irq[0]); aaci = card->private_data; mutex_init(&aaci->ac97_sem); + mutex_init(&aaci->irq_lock); aaci->card = card; aaci->dev = dev; @@ -984,6 +953,10 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) struct aaci_runtime *aacirun = &aaci->playback; int i; + /* + * Enable the channel, but don't assign it to any slots, so + * it won't empty onto the AC'97 link. + */ writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR); for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++) @@ -1002,7 +975,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) writel(aaci->maincr, aaci->base + AACI_MAINCR); /* - * If we hit 4096, we failed. Go back to the specified + * If we hit 4096 entries, we failed. Go back to the specified * fifo depth. */ if (i == 4096) @@ -1011,7 +984,8 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) return i; } -static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) +static int __devinit aaci_probe(struct amba_device *dev, + const struct amba_id *id) { struct aaci *aaci; int ret, i; @@ -1067,11 +1041,12 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) /* * Size the FIFOs (must be multiple of 16). + * This is the number of entries in the FIFO. */ - aaci->fifosize = aaci_size_fifo(aaci); - if (aaci->fifosize & 15) { - printk(KERN_WARNING "AACI: fifosize = %d not supported\n", - aaci->fifosize); + aaci->fifo_depth = aaci_size_fifo(aaci); + if (aaci->fifo_depth & 15) { + printk(KERN_WARNING "AACI: FIFO depth %d not supported\n", + aaci->fifo_depth); ret = -ENODEV; goto out; } @@ -1084,8 +1059,8 @@ static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) ret = snd_card_register(aaci->card); if (ret == 0) { - dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname, - aaci->fifosize); + dev_info(&dev->dev, "%s\n", aaci->card->longname); + dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth); amba_set_drvdata(dev, aaci->card); return ret; } diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h index 6a4a2eebdda..5791bd5bd2a 100644 --- a/sound/arm/aaci.h +++ b/sound/arm/aaci.h @@ -210,6 +210,8 @@ struct aaci_runtime { u32 cr; struct snd_pcm_substream *substream; + unsigned int period; /* byte size of a "period" */ + /* * PIO support */ @@ -217,15 +219,16 @@ struct aaci_runtime { void *end; void *ptr; int bytes; - unsigned int period; - unsigned int fifosz; + unsigned int fifo_bytes; }; struct aaci { struct amba_device *dev; struct snd_card *card; void __iomem *base; - unsigned int fifosize; + unsigned int fifo_depth; + unsigned int users; + struct mutex irq_lock; /* AC'97 */ struct mutex ac97_sem; |