summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/plat-s3c/gpio-config.c2
-rw-r--r--arch/arm/plat-s3c64xx/clock.c2
-rw-r--r--arch/arm/plat-s3c64xx/gpiolib.c6
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/regs-clock.h10
4 files changed, 13 insertions, 7 deletions
diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c
index 08044dec973..456969b6fa0 100644
--- a/arch/arm/plat-s3c/gpio-config.c
+++ b/arch/arm/plat-s3c/gpio-config.c
@@ -119,7 +119,7 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
unsigned int shift = (off & 7) * 4;
u32 con;
- if (off < 8 && chip->chip.ngpio >= 8)
+ if (off < 8 && chip->chip.ngpio > 8)
reg -= 4;
if (s3c_gpio_is_cfg_special(cfg)) {
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
index 0bc2fa1dfc4..7a36e899360 100644
--- a/arch/arm/plat-s3c64xx/clock.c
+++ b/arch/arm/plat-s3c64xx/clock.c
@@ -191,7 +191,7 @@ static struct clk init_clocks[] = {
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_UHOST,
+ .ctrlbit = S3C_CLKCON_HCLK_UHOST,
}, {
.name = "hsmmc",
.id = 0,
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index da7b60ee5e6..92859290ea3 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -321,6 +321,11 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
.get_pull = s3c_gpio_getpull_updown,
};
+int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
+{
+ return IRQ_EINT(0) + pin;
+}
+
static struct s3c_gpio_chip gpio_2bit[] = {
{
.base = S3C64XX_GPF_BASE,
@@ -353,6 +358,7 @@ static struct s3c_gpio_chip gpio_2bit[] = {
.base = S3C64XX_GPN(0),
.ngpio = S3C64XX_GPIO_N_NR,
.label = "GPN",
+ .to_irq = s3c64xx_gpio2int_gpn,
},
}, {
.base = S3C64XX_GPO_BASE,
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
index 52836d41e33..a8777a755df 100644
--- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h
@@ -88,11 +88,11 @@
#define S3C6400_CLKDIV2_SPI0_SHIFT (0)
/* HCLK GATE Registers */
-#define S3C_CLKCON_HCLK_BUS (1<<30)
-#define S3C_CLKCON_HCLK_SECUR (1<<29)
-#define S3C_CLKCON_HCLK_SDMA1 (1<<28)
-#define S3C_CLKCON_HCLK_SDMA2 (1<<27)
-#define S3C_CLKCON_HCLK_UHOST (1<<26)
+#define S3C_CLKCON_HCLK_3DSE (1<<31)
+#define S3C_CLKCON_HCLK_UHOST (1<<29)
+#define S3C_CLKCON_HCLK_SECUR (1<<28)
+#define S3C_CLKCON_HCLK_SDMA1 (1<<27)
+#define S3C_CLKCON_HCLK_SDMA0 (1<<26)
#define S3C_CLKCON_HCLK_IROM (1<<25)
#define S3C_CLKCON_HCLK_DDR1 (1<<24)
#define S3C_CLKCON_HCLK_DDR0 (1<<23)