diff options
Diffstat (limited to 'Documentation/aoe/aoe.txt')
| -rw-r--r-- | Documentation/aoe/aoe.txt | 29 |
1 files changed, 19 insertions, 10 deletions
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index 1212987a30f..3a4dbe4663c 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ... It has many tips and hints! +The aoetools are userland programs that are designed to work with this +driver. The aoetools are on sourceforge. + + http://aoetools.sourceforge.net/ + +The scripts in this Documentation/aoe directory are intended to +document the use of the driver and are not necessary if you install +the aoetools. + + CREATING DEVICE NODES Users of udev should find the block device nodes created @@ -33,19 +43,17 @@ USING DEVICE NODES "cat /dev/etherd/err" blocks, waiting for error diagnostic output, like any retransmitted packets. - The /dev/etherd/interfaces special file is obsoleted by the - aoe_iflist boot option and module option (and its sysfs entry - described in the next section). "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to limit ATA over Ethernet traffic to eth2 and eth4. AoE traffic from - untrusted networks should be ignored as a matter of security. + untrusted networks should be ignored as a matter of security. See + also the aoe_iflist driver option described below. "echo > /dev/etherd/discover" tells the driver to find out what AoE devices are available. These character devices may disappear and be replaced by sysfs - counterparts, so distribution maintainers are encouraged to create - scripts that use these devices. + counterparts. Using the commands in aoetools insulates users from + these implementation details. The block devices are named like this: @@ -69,7 +77,8 @@ USING SYSFS through which we are communicating with the remote AoE device. There is a script in this directory that formats this information - in a convenient way. + in a convenient way. Users with aoetools can use the aoe-stat + command. root@makki root# sh Documentation/aoe/status.sh e10.0 eth3 up @@ -100,9 +109,9 @@ USING SYSFS sysfs entry can be read from as well as written to. It's helpful to trigger discovery after setting the list of allowed - interfaces. If your distro provides an aoe-discover script, you can - use that. Otherwise, you can directly use the /dev/etherd/discover - file described above. + interfaces. The aoetools package provides an aoe-discover script + for this purpose. You can also directly use the + /dev/etherd/discover special file described above. DRIVER OPTIONS |