diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/power/userland-swsusp.txt | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt new file mode 100644 index 00000000000..94058220aaf --- /dev/null +++ b/Documentation/power/userland-swsusp.txt @@ -0,0 +1,149 @@ +Documentation for userland software suspend interface + (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> + +First, the warnings at the beginning of swsusp.txt still apply. + +Second, you should read the FAQ in swsusp.txt _now_ if you have not +done it already. + +Now, to use the userland interface for software suspend you need special +utilities that will read/write the system memory snapshot from/to the +kernel. Such utilities are available, for example, from +<http://www.sisk.pl/kernel/utilities/suspend>. You may want to have +a look at them if you are going to develop your own suspend/resume +utilities. + +The interface consists of a character device providing the open(), +release(), read(), and write() operations as well as several ioctl() +commands defined in kernel/power/power.h. The major and minor +numbers of the device are, respectively, 10 and 231, and they can +be read from /sys/class/misc/snapshot/dev. + +The device can be open either for reading or for writing. If open for +reading, it is considered to be in the suspend mode. Otherwise it is +assumed to be in the resume mode. The device cannot be open for reading +and writing. It is also impossible to have the device open more than once +at a time. + +The ioctl() commands recognized by the device are: + +SNAPSHOT_FREEZE - freeze user space processes (the current process is + not frozen); this is required for SNAPSHOT_ATOMIC_SNAPSHOT + and SNAPSHOT_ATOMIC_RESTORE to succeed + +SNAPSHOT_UNFREEZE - thaw user space processes frozen by SNAPSHOT_FREEZE + +SNAPSHOT_ATOMIC_SNAPSHOT - create a snapshot of the system memory; the + last argument of ioctl() should be a pointer to an int variable, + the value of which will indicate whether the call returned after + creating the snapshot (1) or after restoring the system memory state + from it (0) (after resume the system finds itself finishing the + SNAPSHOT_ATOMIC_SNAPSHOT ioctl() again); after the snapshot + has been created the read() operation can be used to transfer + it out of the kernel + +SNAPSHOT_ATOMIC_RESTORE - restore the system memory state from the + uploaded snapshot image; before calling it you should transfer + the system memory snapshot back to the kernel using the write() + operation; this call will not succeed if the snapshot + image is not available to the kernel + +SNAPSHOT_FREE - free memory allocated for the snapshot image + +SNAPSHOT_SET_IMAGE_SIZE - set the preferred maximum size of the image + (the kernel will do its best to ensure the image size will not exceed + this number, but if it turns out to be impossible, the kernel will + create the smallest image possible) + +SNAPSHOT_AVAIL_SWAP - return the amount of available swap in bytes (the last + argument should be a pointer to an unsigned int variable that will + contain the result if the call is successful). + +SNAPSHOT_GET_SWAP_PAGE - allocate a swap page from the resume partition + (the last argument should be a pointer to a loff_t variable that + will contain the swap page offset if the call is successful) + +SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated with + SNAPSHOT_GET_SWAP_PAGE + +SNAPSHOT_SET_SWAP_FILE - set the resume partition (the last ioctl() argument + should specify the device's major and minor numbers in the old + two-byte format, as returned by the stat() function in the .st_rdev + member of the stat structure); it is recommended to always use this + call, because the code to set the resume partition could be removed from + future kernels + +The device's read() operation can be used to transfer the snapshot image from +the kernel. It has the following limitations: +- you cannot read() more than one virtual memory page at a time +- read()s accross page boundaries are impossible (ie. if ypu read() 1/2 of + a page in the previous call, you will only be able to read() + _at_ _most_ 1/2 of the page in the next call) + +The device's write() operation is used for uploading the system memory snapshot +into the kernel. It has the same limitations as the read() operation. + +The release() operation frees all memory allocated for the snapshot image +and all swap pages allocated with SNAPSHOT_GET_SWAP_PAGE (if any). +Thus it is not necessary to use either SNAPSHOT_FREE or +SNAPSHOT_FREE_SWAP_PAGES before closing the device (in fact it will also +unfreeze user space processes frozen by SNAPSHOT_UNFREEZE if they are +still frozen when the device is being closed). + +Currently it is assumed that the userland utilities reading/writing the +snapshot image from/to the kernel will use a swap parition, called the resume +partition, as storage space. However, this is not really required, as they +can use, for example, a special (blank) suspend partition or a file on a partition +that is unmounted before SNAPSHOT_ATOMIC_SNAPSHOT and mounted afterwards. + +These utilities SHOULD NOT make any assumptions regarding the ordering of +data within the snapshot image, except for the image header that MAY be +assumed to start with an swsusp_info structure, as specified in +kernel/power/power.h. This structure MAY be used by the userland utilities +to obtain some information about the snapshot image, such as the size +of the snapshot image, including the metadata and the header itself, +contained in the .size member of swsusp_info. + +The snapshot image MUST be written to the kernel unaltered (ie. all of the image +data, metadata and header MUST be written in _exactly_ the same amount, form +and order in which they have been read). Otherwise, the behavior of the +resumed system may be totally unpredictable. + +While executing SNAPSHOT_ATOMIC_RESTORE the kernel checks if the +structure of the snapshot image is consistent with the information stored +in the image header. If any inconsistencies are detected, +SNAPSHOT_ATOMIC_RESTORE will not succeed. Still, this is not a fool-proof +mechanism and the userland utilities using the interface SHOULD use additional +means, such as checksums, to ensure the integrity of the snapshot image. + +The suspending and resuming utilities MUST lock themselves in memory, +preferrably using mlockall(), before calling SNAPSHOT_FREEZE. + +The suspending utility MUST check the value stored by SNAPSHOT_ATOMIC_SNAPSHOT +in the memory location pointed to by the last argument of ioctl() and proceed +in accordance with it: +1. If the value is 1 (ie. the system memory snapshot has just been + created and the system is ready for saving it): + (a) The suspending utility MUST NOT close the snapshot device + _unless_ the whole suspend procedure is to be cancelled, in + which case, if the snapshot image has already been saved, the + suspending utility SHOULD destroy it, preferrably by zapping + its header. If the suspend is not to be cancelled, the + system MUST be powered off or rebooted after the snapshot + image has been saved. + (b) The suspending utility SHOULD NOT attempt to perform any + file system operations (including reads) on the file systems + that were mounted before SNAPSHOT_ATOMIC_SNAPSHOT has been + called. However, it MAY mount a file system that was not + mounted at that time and perform some operations on it (eg. + use it for saving the image). +2. If the value is 0 (ie. the system state has just been restored from + the snapshot image), the suspending utility MUST close the snapshot + device. Afterwards it will be treated as a regular userland process, + so it need not exit. + +The resuming utility SHOULD NOT attempt to mount any file systems that could +be mounted before suspend and SHOULD NOT attempt to perform any operations +involving such file systems. + +For details, please refer to the source code. |