summaryrefslogtreecommitdiff
path: root/arch/arm/kernel/perf_event_v6.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/kernel/perf_event_v6.c')
-rw-r--r--arch/arm/kernel/perf_event_v6.c672
1 files changed, 672 insertions, 0 deletions
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
new file mode 100644
index 00000000000..c058bfc8532
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -0,0 +1,672 @@
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ * - change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ * effectively stops the counter from counting.
+ * - disable the counter's interrupt generation (each counter has it's
+ * own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ * - enable the counter's interrupt generation.
+ * - set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+#ifdef CONFIG_CPU_V6
+enum armv6_perf_types {
+ ARMV6_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6_PERFCTR_BR_EXEC = 0x5,
+ ARMV6_PERFCTR_BR_MISPREDICT = 0x6,
+ ARMV6_PERFCTR_INSTR_EXEC = 0x7,
+ ARMV6_PERFCTR_DCACHE_HIT = 0x9,
+ ARMV6_PERFCTR_DCACHE_ACCESS = 0xA,
+ ARMV6_PERFCTR_DCACHE_MISS = 0xB,
+ ARMV6_PERFCTR_DCACHE_WBACK = 0xC,
+ ARMV6_PERFCTR_SW_PC_CHANGE = 0xD,
+ ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF,
+ ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10,
+ ARMV6_PERFCTR_LSU_FULL_STALL = 0x11,
+ ARMV6_PERFCTR_WBUF_DRAINED = 0x12,
+ ARMV6_PERFCTR_CPU_CYCLES = 0xFF,
+ ARMV6_PERFCTR_NOP = 0x20,
+};
+
+enum armv6_counters {
+ ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_COUNTER0,
+ ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ /*
+ * The performance counters don't differentiate between read
+ * and write accesses/misses so this isn't strictly correct,
+ * but it's the best we can do. Writes and reads get
+ * combined.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+enum armv6mpcore_perf_types {
+ ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0,
+ ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1,
+ ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2,
+ ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3,
+ ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4,
+ ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5,
+ ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6,
+ ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7,
+ ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD,
+ ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+ ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF,
+ ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10,
+ ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+ ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12,
+ ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13,
+ ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+ [C(RESULT_MISS)] =
+ ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ /*
+ * The ARM performance counters can count micro DTLB misses,
+ * micro ITLB misses and main TLB misses. There isn't an event
+ * for TLB misses, so use the micro misses here and if users
+ * want the main TLB misses they can use a raw counter.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val));
+ return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE (1 << 0)
+#define ARMV6_PMCR_CTR01_RESET (1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET (1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV (1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN (1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN (1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN (1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20
+#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12
+#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+ (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+ ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+ return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+ enum armv6_counters counter)
+{
+ int ret = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+ else if (ARMV6_COUNTER0 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+ else if (ARMV6_COUNTER1 == counter)
+ ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+ unsigned long value = 0;
+
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+ return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+ u32 value)
+{
+ if (ARMV6_CYCLE_COUNTER == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value));
+ else if (ARMV6_COUNTER0 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value));
+ else if (ARMV6_COUNTER1 == counter)
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value));
+ else
+ WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+static void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = 0;
+ evt = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+ ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+ ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the event
+ * that we're interested in.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+ void *dev)
+{
+ unsigned long pmcr = armv6_pmcr_read();
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ struct pt_regs *regs;
+ int idx;
+
+ if (!armv6_pmcr_has_overflowed(pmcr))
+ return IRQ_NONE;
+
+ regs = get_irq_regs();
+
+ /*
+ * The interrupts are cleared by writing the overflow flags back to
+ * the control register. All of the other bits don't have any effect
+ * if they are rewritten, so write the whole value back.
+ */
+ armv6_pmcr_write(pmcr);
+
+ perf_sample_data_init(&data, 0);
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+ for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc;
+
+ if (!test_bit(idx, cpuc->active_mask))
+ continue;
+
+ /*
+ * We have a single interrupt for all counters. Check that
+ * each counter has overflowed before we process it.
+ */
+ if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+ continue;
+
+ hwc = &event->hw;
+ armpmu_event_update(event, hwc, idx);
+ data.period = event->hw.last_period;
+ if (!armpmu_event_set_period(event, hwc, idx))
+ continue;
+
+ if (perf_event_overflow(event, 0, &data, regs))
+ armpmu->disable(hwc, idx);
+ }
+
+ /*
+ * Handle the pending perf events.
+ *
+ * Note: this call *must* be run with interrupts disabled. For
+ * platforms that can have the PMU interrupts raised as an NMI, this
+ * will not work.
+ */
+ irq_work_run();
+
+ return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val |= ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6pmu_stop(void)
+{
+ unsigned long flags, val;
+
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~ARMV6_PMCR_ENABLE;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *event)
+{
+ /* Always place a cycle counter into the cycle counter. */
+ if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+ if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+ return -EAGAIN;
+
+ return ARMV6_CYCLE_COUNTER;
+ } else {
+ /*
+ * For anything other than a cycle counter, try and use
+ * counter0 and counter1.
+ */
+ if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
+ return ARMV6_COUNTER1;
+
+ if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
+ return ARMV6_COUNTER0;
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+ }
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, evt, flags;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ evt = 0;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+ evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Mask out the current event and set the counter to count the number
+ * of ETM bus signal assertion cycles. The external reporting should
+ * be disabled and so this should never increment.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+ int idx)
+{
+ unsigned long val, mask, flags, evt = 0;
+
+ if (ARMV6_CYCLE_COUNTER == idx) {
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ } else if (ARMV6_COUNTER0 == idx) {
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ } else if (ARMV6_COUNTER1 == idx) {
+ mask = ARMV6_PMCR_COUNT1_IEN;
+ } else {
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return;
+ }
+
+ /*
+ * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+ * simply disable the interrupt reporting.
+ */
+ raw_spin_lock_irqsave(&pmu_lock, flags);
+ val = armv6_pmcr_read();
+ val &= ~mask;
+ val |= evt;
+ armv6_pmcr_write(val);
+ raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+ .id = ARM_PERF_PMU_ID_V6,
+ .name = "v6",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6_perf_cache_map,
+ .event_map = &armv6_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return &armv6pmu;
+}
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+ .id = ARM_PERF_PMU_ID_V6MP,
+ .name = "v6mpcore",
+ .handle_irq = armv6pmu_handle_irq,
+ .enable = armv6pmu_enable_event,
+ .disable = armv6mpcore_pmu_disable_event,
+ .read_counter = armv6pmu_read_counter,
+ .write_counter = armv6pmu_write_counter,
+ .get_event_idx = armv6pmu_get_event_idx,
+ .start = armv6pmu_start,
+ .stop = armv6pmu_stop,
+ .cache_map = &armv6mpcore_perf_cache_map,
+ .event_map = &armv6mpcore_perf_map,
+ .raw_event_mask = 0xFF,
+ .num_events = 3,
+ .max_period = (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return &armv6mpcore_pmu;
+}
+#else
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+ return NULL;
+}
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_CPU_V6 */