diff options
Diffstat (limited to 'arch/arm/mach-mxs')
| -rw-r--r-- | arch/arm/mach-mxs/Kconfig | 3 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/devices.c | 11 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/devices/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/devices/platform-gpio-mxs.c | 53 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/devices/platform-mxsfb.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/gpio.c | 331 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/gpio.h | 34 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/devices-common.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/include/mach/dma.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 22 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-tx28.c | 19 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mm-mx23.c | 1 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mm-mx28.c | 1 |
14 files changed, 380 insertions, 103 deletions
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 4cd0231ee53..f114960622e 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -41,7 +41,6 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 - select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC @@ -56,12 +55,10 @@ config MACH_MX28EVK config MODULE_TX28 bool select SOC_IMX28 - select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM config MACH_TX28 diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 6c38262a3aa..58e892376bf 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o +obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index fe3e847930c..cfdb6b28470 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -88,14 +88,3 @@ int __init mxs_add_amba_device(const struct amba_device *dev) return amba_device_register(adev, &iomem_resource); } - -struct device mxs_apbh_bus = { - .init_name = "mxs_apbh", - .parent = &platform_bus, -}; - -static int __init mxs_device_init(void) -{ - return device_register(&mxs_apbh_bus); -} -core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 351915c683f..324f2824d38 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -6,5 +6,4 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o -obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c deleted file mode 100644 index ed0885e414e..00000000000 --- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include <linux/compiler.h> -#include <linux/err.h> -#include <linux/init.h> - -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <mach/devices-common.h> - -struct platform_device *__init mxs_add_gpio( - int id, resource_size_t iobase, int irq) -{ - struct resource res[] = { - { - .start = iobase, - .end = iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return platform_device_register_resndata(&mxs_apbh_bus, - "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); -} - -static int __init mxs_add_mxs_gpio(void) -{ - if (cpu_is_mx23()) { - mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); - mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); - mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); - } - - if (cpu_is_mx28()) { - mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); - mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); - mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); - mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); - mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); - } - - return 0; -} -postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c index 5a75b7180f7..bf72c9b8dbd 100644 --- a/arch/arm/mach-mxs/devices/platform-mxsfb.c +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -5,7 +5,6 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx23.h> #include <mach/mx28.h> diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c new file mode 100644 index 00000000000..2c950fef71a --- /dev/null +++ b/arch/arm/mach-mxs/gpio.c @@ -0,0 +1,331 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <asm-generic/bug.h> + +#include "gpio.h" + +static struct mxs_gpio_port *mxs_gpio_ports; +static int gpio_table_size; + +#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) +#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) +#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) +#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) +#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) +#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) +#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) +#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) + +#define GPIO_INT_FALL_EDGE 0x0 +#define GPIO_INT_LOW_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_HIGH_LEV 0x3 +#define GPIO_INT_LEV_MASK (1 << 0) +#define GPIO_INT_POL_MASK (1 << 1) + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) +{ + __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); +} + +static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, + int enable) +{ + if (enable) { + __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); + __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); + } else { + __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); + } +} + +static void mxs_gpio_ack_irq(struct irq_data *d) +{ + u32 gpio = irq_to_gpio(d->irq); + clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); +} + +static void mxs_gpio_mask_irq(struct irq_data *d) +{ + u32 gpio = irq_to_gpio(d->irq); + set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); +} + +static void mxs_gpio_unmask_irq(struct irq_data *d) +{ + u32 gpio = irq_to_gpio(d->irq); + set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); +} + +static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); + +static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) +{ + u32 gpio = irq_to_gpio(d->irq); + u32 pin_mask = 1 << (gpio & 31); + struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; + void __iomem *pin_addr; + int edge; + + switch (type) { + case IRQ_TYPE_EDGE_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: + return -EINVAL; + } + + /* set level or edge */ + pin_addr = port->base + PINCTRL_IRQLEV(port->id); + if (edge & GPIO_INT_LEV_MASK) + __mxs_setl(pin_mask, pin_addr); + else + __mxs_clrl(pin_mask, pin_addr); + + /* set polarity */ + pin_addr = port->base + PINCTRL_IRQPOL(port->id); + if (edge & GPIO_INT_POL_MASK) + __mxs_setl(pin_mask, pin_addr); + else + __mxs_clrl(pin_mask, pin_addr); + + clear_gpio_irqstatus(port, gpio & 0x1f); + + return 0; +} + +/* MXS has one interrupt *per* gpio port */ +static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); + u32 gpio_irq_no_base = port->virtual_irq_start; + + desc->irq_data.chip->irq_ack(&desc->irq_data); + + irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & + __raw_readl(port->base + PINCTRL_IRQEN(port->id)); + + while (irq_stat != 0) { + int irqoffset = fls(irq_stat) - 1; + generic_handle_irq(gpio_irq_no_base + irqoffset); + irq_stat &= ~(1 << irqoffset); + } +} + +/* + * Set interrupt number "irq" in the GPIO as a wake-up source. + * While system is running, all registered GPIO interrupts need to have + * wake-up enabled. When system is suspended, only selected GPIO interrupts + * need to have wake-up enabled. + * @param irq interrupt source number + * @param enable enable as wake-up if equal to non-zero + * @return This function returns 0 on success. + */ +static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) +{ + u32 gpio = irq_to_gpio(d->irq); + u32 gpio_idx = gpio & 0x1f; + struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; + + if (enable) { + if (port->irq_high && (gpio_idx >= 16)) + enable_irq_wake(port->irq_high); + else + enable_irq_wake(port->irq); + } else { + if (port->irq_high && (gpio_idx >= 16)) + disable_irq_wake(port->irq_high); + else + disable_irq_wake(port->irq); + } + + return 0; +} + +static struct irq_chip gpio_irq_chip = { + .name = "mxs gpio", + .irq_ack = mxs_gpio_ack_irq, + .irq_mask = mxs_gpio_mask_irq, + .irq_unmask = mxs_gpio_unmask_irq, + .irq_set_type = mxs_gpio_set_irq_type, + .irq_set_wake = mxs_gpio_set_wake_irq, +}; + +static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, + int dir) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); + + if (dir) + __mxs_setl(1 << offset, pin_addr); + else + __mxs_clrl(1 << offset, pin_addr); +} + +static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + + return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; +} + +static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); + + if (value) + __mxs_setl(1 << offset, pin_addr); + else + __mxs_clrl(1 << offset, pin_addr); +} + +static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct mxs_gpio_port *port = + container_of(chip, struct mxs_gpio_port, chip); + + return port->virtual_irq_start + offset; +} + +static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + mxs_set_gpio_direction(chip, offset, 0); + return 0; +} + +static int mxs_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + mxs_gpio_set(chip, offset, value); + mxs_set_gpio_direction(chip, offset, 1); + return 0; +} + +int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) +{ + int i, j; + + /* save for local usage */ + mxs_gpio_ports = port; + gpio_table_size = cnt; + + pr_info("MXS GPIO hardware\n"); + + for (i = 0; i < cnt; i++) { + /* disable the interrupt and clear the status */ + __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); + __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); + + /* clear address has to be used to clear IRQSTAT bits */ + __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); + + for (j = port[i].virtual_irq_start; + j < port[i].virtual_irq_start + 32; j++) { + irq_set_chip_and_handler(j, &gpio_irq_chip, + handle_level_irq); + set_irq_flags(j, IRQF_VALID); + } + + /* setup one handler for each entry */ + irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); + irq_set_handler_data(port[i].irq, &port[i]); + + /* register gpio chip */ + port[i].chip.direction_input = mxs_gpio_direction_input; + port[i].chip.direction_output = mxs_gpio_direction_output; + port[i].chip.get = mxs_gpio_get; + port[i].chip.set = mxs_gpio_set; + port[i].chip.to_irq = mxs_gpio_to_irq; + port[i].chip.base = i * 32; + port[i].chip.ngpio = 32; + + /* its a serious configuration bug when it fails */ + BUG_ON(gpiochip_add(&port[i].chip) < 0); + } + + return 0; +} + +#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) +#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) + +#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ + { \ + .chip.label = "gpio-" #_id, \ + .id = _id, \ + .irq = _irq, \ + .base = _base, \ + .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ + } + +#ifdef CONFIG_SOC_IMX23 +static struct mxs_gpio_port mx23_gpio_ports[] = { + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), +}; + +int __init mx23_register_gpios(void) +{ + return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); +} +#endif + +#ifdef CONFIG_SOC_IMX28 +static struct mxs_gpio_port mx28_gpio_ports[] = { + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), + DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), +}; + +int __init mx28_register_gpios(void) +{ + return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); +} +#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h new file mode 100644 index 00000000000..005bb06630b --- /dev/null +++ b/arch/arm/mach-mxs/gpio.h @@ -0,0 +1,34 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MXS_GPIO_H__ +#define __MXS_GPIO_H__ + +struct mxs_gpio_port { + void __iomem *base; + int id; + int irq; + int irq_high; + int virtual_irq_start; + struct gpio_chip chip; +}; + +int mxs_gpio_init(struct mxs_gpio_port*, int); + +#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 812d7a813a7..7a37469ed5b 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -11,8 +11,6 @@ #include <linux/init.h> #include <linux/amba/bus.h> -extern struct device mxs_apbh_bus; - struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h index 203d7c4a3e1..7f4aeeaba8d 100644 --- a/arch/arm/mach-mxs/include/mach/dma.h +++ b/arch/arm/mach-mxs/include/mach/dma.h @@ -9,8 +9,6 @@ #ifndef __MACH_MXS_DMA_H__ #define __MACH_MXS_DMA_H__ -#include <linux/dmaengine.h> - struct mxs_dma_data { int chan_irq; }; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eaaf6ff2899..eacdc6b0e70 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -15,7 +15,6 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <linux/leds.h> #include <linux/irq.h> #include <linux/clk.h> @@ -27,10 +26,10 @@ #include <mach/iomux-mx28.h> #include "devices-mx28.h" +#include "gpio.h" #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) -#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) #define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) @@ -180,23 +179,6 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* slot power enable */ MX28_PAD_PWM4__GPIO_3_29 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, -}; - -/* led */ -static const struct gpio_led mx28evk_leds[] __initconst = { - { - .name = "GPIO-LED", - .default_trigger = "heartbeat", - .gpio = MX28EVK_GPIO_LED, - }, -}; - -static const struct gpio_led_platform_data mx28evk_led_data __initconst = { - .leds = mx28evk_leds, - .num_leds = ARRAY_SIZE(mx28evk_leds), }; /* fec */ @@ -404,8 +386,6 @@ static void __init mx28evk_init(void) if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - - gpio_led_register_device(0, &mx28evk_led_data); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 515a423f82c..b65e3719cbc 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -101,6 +101,14 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DATA3__SSP0_D3 | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_CMD__SSP0_CMD | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | @@ -109,7 +117,7 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; -static const struct gpio_led tx28_stk5v3_leds[] __initconst = { +static struct gpio_led tx28_stk5v3_leds[] = { { .name = "GPIO-LED", .default_trigger = "heartbeat", @@ -139,11 +147,6 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { }, }; -static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - static void __init tx28_stk5v3_init(void) { mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, @@ -156,11 +159,11 @@ static void __init tx28_stk5v3_init(void) /* spi via ssp will be added when available */ spi_register_board_info(tx28_spi_board_info, ARRAY_SIZE(tx28_spi_board_info)); - gpio_led_register_device(0, &tx28_stk5v3_led_data); + mxs_add_platform_device("leds-gpio", 0, NULL, 0, + &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data)); mx28_add_mxs_i2c(0); i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); - mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); } static void __init tx28_timer_init(void) diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c index 1b2345ac1a8..5148cd64a6b 100644 --- a/arch/arm/mach-mxs/mm-mx23.c +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -41,4 +41,5 @@ void __init mx23_map_io(void) void __init mx23_init_irq(void) { icoll_init_irq(); + mx23_register_gpios(); } diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c index b6e18ddb92c..7e4cea32ebc 100644 --- a/arch/arm/mach-mxs/mm-mx28.c +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -41,4 +41,5 @@ void __init mx28_map_io(void) void __init mx28_init_irq(void) { icoll_init_irq(); + mx28_register_gpios(); } |