1 files changed, 29 insertions, 18 deletions

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 34b0cb4d189..4fcd1300d5d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -62,7 +62,9 @@
  *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
  *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
  *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
- *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
+ *	XMA	= GPIO173, GPIO172, GPIO171: 0 0 0
+ *	XMB	= GPIO173, GPIO172, GPIO171: 0 0 1
+ *	XMC	= GPIO173, GPIO172, GPIO171: 0 1 0
  */
 enum {
 	OMAP3BEAGLE_BOARD_UNKN = 0,
@@ -70,6 +72,7 @@ enum {
 	OMAP3BEAGLE_BOARD_C1_3,
 	OMAP3BEAGLE_BOARD_C4,
 	OMAP3BEAGLE_BOARD_XM,
+	OMAP3BEAGLE_BOARD_XMC,
 };
 
 static u8 omap3_beagle_version;
@@ -121,12 +124,21 @@ static void __init omap3_beagle_init_rev(void)
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
 		break;
 	case 0:
-		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM A\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
 		break;
+	case 1:
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM B\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+		break;
+	case 2:
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
+		break;
 	default:
-		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
-		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd, "
+				 "assuming xM C or newer\n", beagle_rev);
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
 	}
 
 	return;
@@ -244,6 +256,13 @@ static void __init beagle_display_init(void)
 {
 	int r;
 
+	/* DVI reset GPIO is different between beagle revisions */
+	if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
+			(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC))
+		beagle_dvi_device.reset_gpio = 129;
+	else
+		beagle_dvi_device.reset_gpio = 170;
+
 	r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
 	if (r < 0) {
 		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
@@ -279,7 +298,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
 {
 	int r;
 
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+	if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
+			(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)) {
 		mmc[0].gpio_wp = -EINVAL;
 	} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
 		(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
@@ -299,7 +319,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
-	if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) {
+	if ((omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) &&
+			(omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XMC)) {
 		r = gpio_request(gpio + 1, "EHCI_nOC");
 		if (!r) {
 			r = gpio_direction_input(gpio + 1);
@@ -320,12 +341,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	else
 		gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
-	/* DVI reset GPIO is different between beagle revisions */
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
-		beagle_dvi_device.reset_gpio = 129;
-	else
-		beagle_dvi_device.reset_gpio = 170;
-
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
@@ -335,7 +350,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
 	 * P7/P8 revisions(prototype): Camera EN
 	 * A2+ revisions (production): LDO (supplies DVI, serial, led blocks)
 	 */
-	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+	if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) ||
+			(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XMC)) {
 		r = gpio_request(gpio + 1, "nDVI_PWR_EN");
 		if (!r) {
 			r = gpio_direction_output(gpio + 1, 0);
@@ -665,11 +681,6 @@ static void __init omap3_beagle_init(void)
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
 
-	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-	gpio_request(170, "DVI_nPD");
-	/* REVISIT leave DVI powered down until it's needed ... */
-	gpio_direction_output(170, true);
-
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	omap3beagle_flash_init();