diff options
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.h')
-rw-r--r-- | arch/arm/mach-ux500/board-mop500.h | 62 |
1 files changed, 53 insertions, 9 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index ee77a8970c3..829a7bece6e 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,10 +7,19 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H -/* snowball GPIO for MMC card */ -#define SNOWBALL_SDMMC_EN_GPIO 217 -#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 -#define SNOWBALL_SDMMC_CD_GPIO 218 +/* This defines the NOMADIK_NR_GPIO */ +#include <linux/mfd/ab8500/gpio.h> +#include <mach/gpio.h> + +/* Snowball GPIO for MMC card */ +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 + +/* Snowball specific GPIO assignments, this board has no GPIO expander */ +#define SNOWBALL_ACCEL_INT1_GPIO 163 +#define SNOWBALL_ACCEL_INT2_GPIO 164 +#define SNOWBALL_MAGNET_DRDY_GPIO 165 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ #define HREFV60_TOUCH_RST_GPIO 143 @@ -24,18 +33,43 @@ #define HREFV60_MAGNET_DRDY_GPIO 32 #define HREFV60_DISP1_RST_GPIO 65 #define HREFV60_DISP2_RST_GPIO 66 +#define HREFV60_MMIO_XENON_CHARGE 170 +#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140 +#define HREFV60_CAMERA_FLASH_ENABLE 22 +#define XSHUTDOWN_PRIMARY_SENSOR 141 +#define XSHUTDOWN_SECONDARY_SENSOR 142 +#define CAMERA_FLASH_INT_PIN 7 +#define CYPRESS_TOUCH_INT_PIN 84 +#define CYPRESS_TOUCH_RST_GPIO 143 +#define CYPRESS_SLAVE_SELECT_GPIO 216 + +/* MOP500 generic GPIOs */ +#define MOP500_HDMI_RST_GPIO 196 /* GPIOs on the TC35892 expander */ -#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) +#define GPIO_MAGNET_DRDY MOP500_EGPIO(1) #define GPIO_SDMMC_CD MOP500_EGPIO(3) +#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4) +#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5) #define GPIO_PROX_SENSOR MOP500_EGPIO(7) +#define GPIO_HAL_SENSOR MOP500_EGPIO(8) +#define GPIO_ACCEL_INT1 MOP500_EGPIO(10) +#define GPIO_ACCEL_INT2 MOP500_EGPIO(11) #define GPIO_BU21013_CS MOP500_EGPIO(13) +#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14) +#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15) #define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) -#define MOP500_EGPIO_END MOP500_EGPIO(24) -/* GPIOs on the AB8500 mixed-signals circuit */ -#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x)) +/*Snowball AB8500 GPIO */ +#define SNOWBALL_VSMPS2_1V8_GPIO AB8500_PIN_GPIO1 /* SYSCLKREQ2/GPIO1 */ +#define SNOWBALL_PM_GPIO1_GPIO AB8500_PIN_GPIO2 /* SYSCLKREQ3/GPIO2 */ +#define SNOWBALL_WLAN_CLK_REQ_GPIO AB8500_PIN_GPIO3 /* SYSCLKREQ4/GPIO3 */ +#define SNOWBALL_PM_GPIO4_GPIO AB8500_PIN_GPIO4 /* SYSCLKREQ6/GPIO4 */ +#define SNOWBALL_EN_3V6_GPIO AB8500_PIN_GPIO16 /* PWMOUT3/GPIO16 */ +#define SNOWBALL_PME_ETH_GPIO AB8500_PIN_GPIO24 /* SYSCLKREQ7/GPIO24 */ +#define SNOWBALL_EN_3V3_ETH_GPIO AB8500_PIN_GPIO26 /* GPIO26 */ + struct i2c_board_info; @@ -43,9 +77,19 @@ extern void mop500_sdi_init(void); extern void mop500_sdi_tc35892_init(void); void __init mop500_u8500uib_init(void); void __init mop500_stuib_init(void); +void __init mop500_msp_init(void); void __init mop500_pins_init(void); +void mop500_cyttsp_init(void); +void __init mop500_u8500uib_r3_init(void); -void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, +void mop500_uib_i2c_add(int busnum, struct i2c_board_info const *info, unsigned n); +int msp13_i2s_init(void); +int msp13_i2s_exit(void); + +int uib_is_stuib(void); +int uib_is_u8500uib(void); +int uib_is_u8500uibr3(void); + #endif |