diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
-rw-r--r-- | arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/clock.h | 4 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/common.h | 6 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/cpu.h | 35 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/dmtimer.h | 251 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/gpio.h | 20 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/i2c.h | 6 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/irqs.h | 18 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/mcbsp.h | 74 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/nand.h | 6 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/omap-pm.h | 8 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/omap4-keypad.h | 3 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/omap_hwmod.h | 35 | ||||
-rw-r--r-- | arch/arm/plat-omap/include/plat/uncompress.h | 1 |
14 files changed, 115 insertions, 353 deletions
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index 387a9638991..f1899a3e417 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -39,7 +39,6 @@ struct omap_clk { #define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) -#define CK_446X (1 << 13) #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index df4b9683f17..006e599c661 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -58,12 +58,10 @@ struct clkops { #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) #define RATE_IN_TI816X (1 << 6) -#define RATE_IN_4460 (1 << 7) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) #define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) -#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) @@ -154,7 +152,7 @@ struct dpll_data { u16 max_multiplier; u8 last_rounded_n; u8 min_divider; - u16 max_divider; + u8 max_divider; u8 modes; #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 4564cc697d7..5288130be96 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,11 +34,7 @@ struct sys_timer; extern void omap_map_common_io(void); -extern struct sys_timer omap1_timer; -extern struct sys_timer omap2_timer; -extern struct sys_timer omap3_timer; -extern struct sys_timer omap3_secure_timer; -extern struct sys_timer omap4_timer; +extern struct sys_timer omap_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern unsigned long long notrace omap_32k_sched_clock(void); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 67b3d75884c..8198bb6cdb5 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -88,7 +88,6 @@ unsigned int omap_rev(void); * cpu_is_omap243x(): True for OMAP2430 * cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap443x(): True for OMAP4430 - * cpu_is_omap446x(): True for OMAP4460 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -124,7 +123,6 @@ IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) -IS_OMAP_SUBCLASS(446x, 0x446) IS_TI_SUBCLASS(816x, 0x816) @@ -139,7 +137,6 @@ IS_TI_SUBCLASS(816x, 0x816) #define cpu_is_ti816x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 -#define cpu_is_omap446x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -364,10 +361,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# undef cpu_is_omap446x # define cpu_is_omap44xx() is_omap44xx() # define cpu_is_omap443x() is_omap443x() -# define cpu_is_omap446x() is_omap446x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -415,9 +410,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) -#define OMAP446X_CLASS 0x44600044 -#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) - /* * omap_chip bits * @@ -447,15 +439,13 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP4430ES2_1 (1 << 12) #define CHIP_IS_OMAP4430ES2_2 (1 << 13) #define CHIP_IS_TI816X (1 << 14) -#define CHIP_IS_OMAP4460ES1_0 (1 << 15) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) #define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ CHIP_IS_OMAP4430ES2 | \ CHIP_IS_OMAP4430ES2_1 | \ - CHIP_IS_OMAP4430ES2_2 | \ - CHIP_IS_OMAP4460ES1_0) + CHIP_IS_OMAP4430ES2_2) /* * "GE" here represents "greater than or equal to" in terms of ES @@ -478,7 +468,7 @@ void omap2_check_revision(void); /* * Runtime detection of OMAP3 features */ -extern u32 omap_features; +extern u32 omap3_features; #define OMAP3_HAS_L2CACHE BIT(0) #define OMAP3_HAS_IVA BIT(1) @@ -488,15 +478,11 @@ extern u32 omap_features; #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) -#define OMAP4_HAS_MPU_1GHZ BIT(8) -#define OMAP4_HAS_MPU_1_2GHZ BIT(9) -#define OMAP4_HAS_MPU_1_5GHZ BIT(10) - #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ { \ - return omap_features & OMAP3_HAS_ ##flag; \ + return (omap3_features & OMAP3_HAS_ ##flag); \ } \ OMAP3_HAS_FEATURE(l2cache, L2CACHE) @@ -508,19 +494,4 @@ OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) OMAP3_HAS_FEATURE(sdrc, SDRC) -/* - * Runtime detection of OMAP4 features - */ -extern u32 omap_features; - -#define OMAP4_HAS_FEATURE(feat, flag) \ -static inline unsigned int omap4_has_ ##feat(void) \ -{ \ - return omap_features & OMAP4_HAS_ ##flag; \ -} \ - -OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) -OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) -OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) - #endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index eb5d16c60cd..d6c70d2f403 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,10 +32,6 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> - #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -60,8 +56,12 @@ */ #define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; +extern struct omap_dm_timer *gptimer_wakeup; +extern struct sys_timer omap_timer; struct clk; +int omap_dm_timer_init(void); + struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); @@ -93,248 +93,5 @@ void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value int omap_dm_timers_active(void); -/* - * Do not use the defines below, they are not needed. They should be only - * used by dmtimer.c and sys_timer related code. - */ - -/* register offsets */ -#define _OMAP_TIMER_ID_OFFSET 0x00 -#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 -#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 -#define _OMAP_TIMER_STAT_OFFSET 0x18 -#define _OMAP_TIMER_INT_EN_OFFSET 0x1c -#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 -#define _OMAP_TIMER_CTRL_OFFSET 0x24 -#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) -#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) -#define OMAP_TIMER_CTRL_PT (1 << 12) -#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) -#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) -#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) -#define OMAP_TIMER_CTRL_SCPWM (1 << 7) -#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ -#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ -#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ -#define OMAP_TIMER_CTRL_POSTED (1 << 2) -#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ -#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ -#define _OMAP_TIMER_COUNTER_OFFSET 0x28 -#define _OMAP_TIMER_LOAD_OFFSET 0x2c -#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 -#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 -#define WP_NONE 0 /* no write pending bit */ -#define WP_TCLR (1 << 0) -#define WP_TCRR (1 << 1) -#define WP_TLDR (1 << 2) -#define WP_TTGR (1 << 3) -#define WP_TMAR (1 << 4) -#define WP_TPIR (1 << 5) -#define WP_TNIR (1 << 6) -#define WP_TCVR (1 << 7) -#define WP_TOCR (1 << 8) -#define WP_TOWR (1 << 9) -#define _OMAP_TIMER_MATCH_OFFSET 0x38 -#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c -#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 -#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ -#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ -#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ -#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ - -/* register offsets with the write pending bit encoded */ -#define WPSHIFT 16 - -#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ - | (WP_TCLR << WPSHIFT)) - -#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ - | (WP_TCRR << WPSHIFT)) - -#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ - | (WP_TLDR << WPSHIFT)) - -#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ - | (WP_TTGR << WPSHIFT)) - -#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ - | (WP_TMAR << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ - | (WP_TPIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ - | (WP_TNIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ - | (WP_TCVR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ - (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ - (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) - -struct omap_dm_timer { - unsigned long phys_base; - int irq; -#ifdef CONFIG_ARCH_OMAP2PLUS - struct clk *iclk, *fclk; -#endif - void __iomem *io_base; - unsigned long rate; - unsigned reserved:1; - unsigned enabled:1; - unsigned posted:1; -}; - -extern u32 sys_timer_reserved; -void omap_dm_timer_prepare(struct omap_dm_timer *timer); - -static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, - int posted) -{ - if (posted) - while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - - return __raw_readl(base + (reg & 0xff)); -} - -static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val, - int posted) -{ - if (posted) - while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - - __raw_writel(val, base + (reg & 0xff)); -} - -/* Assumes the source clock has been set by caller */ -static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, - int wakeup) -{ - u32 l; - - l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ - - if (autoidle) - l |= 0x1 << 0; - - if (wakeup) - l |= 1 << 2; - - __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0); - - /* Match hardware reset default of posted mode */ - __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED, 0); -} - -static inline int __omap_dm_timer_set_source(struct clk *timer_fck, - struct clk *parent) -{ - int ret; - - clk_disable(timer_fck); - ret = clk_set_parent(timer_fck, parent); - clk_enable(timer_fck); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; -} - -static inline void __omap_dm_timer_stop(void __iomem *base, int posted, - unsigned long rate) -{ - u32 l; - - l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); - if (l & OMAP_TIMER_CTRL_ST) { - l &= ~0x1; - __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted); -#ifdef CONFIG_ARCH_OMAP2PLUS - /* Readback to make sure write has completed */ - __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); - /* - * Wait for functional clock period x 3.5 to make sure that - * timer is stopped - */ - udelay(3500000 / rate + 1); -#endif - } - - /* Ack possibly pending interrupt */ - __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW, 0); -} - -static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl, - unsigned int load, int posted) -{ - __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted); - __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted); -} - -static inline void __omap_dm_timer_int_enable(void __iomem *base, - unsigned int value) -{ - __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0); - __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0); -} - -static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base, - int posted) -{ - return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted); -} - -static inline void __omap_dm_timer_write_status(void __iomem *base, - unsigned int value) -{ - __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0); -} #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 91e8de3db08..ec97e00cb58 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,32 +174,12 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; -struct omap_gpio_reg_offs { - u16 revision; - u16 direction; - u16 datain; - u16 dataout; - u16 set_dataout; - u16 clr_dataout; - u16 irqstatus; - u16 irqstatus2; - u16 irqenable; - u16 set_irqenable; - u16 clr_irqenable; - u16 debounce; - u16 debounce_en; - - bool irqenable_inv; -}; - struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ - - struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 7c22b9e10dc..878d632c409 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -22,7 +22,6 @@ #define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> -#include <linux/i2c-omap.h> #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -47,13 +46,10 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, */ struct omap_i2c_dev_attr { u8 fifo_depth; - u32 flags; + u8 flags; }; void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); -struct omap_hwmod; -int omap_i2c_reset(struct omap_hwmod *oh); - #endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 926d25c780f..5a25098ea7e 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -407,19 +407,11 @@ #endif #define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) -#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END -#ifdef CONFIG_TWL6040_CODEC -#define TWL6040_CODEC_NR_IRQS 6 -#else -#define TWL6040_CODEC_NR_IRQS 0 -#endif -#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) - /* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) +#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) #define TWL_IRQ_END TWL4030_GPIO_IRQ_END #else -#define TWL_IRQ_END TWL6040_CODEC_IRQ_END +#define TWL_IRQ_END TWL6030_IRQ_END #endif /* GPMC related */ @@ -436,11 +428,7 @@ #define INTCPS_NR_IRQS 96 #ifndef __ASSEMBLY__ -extern void __iomem *omap_irq_base; -void omap1_init_irq(void); -void omap2_init_irq(void); -void omap3_init_irq(void); -void ti816x_init_irq(void); +extern void omap_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 9882c657b2d..f8f690ab299 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -24,6 +24,7 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H +#include <linux/completion.h> #include <linux/spinlock.h> #include <mach/hardware.h> @@ -33,7 +34,7 @@ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ static struct platform_device omap_mcbsp##port_nr = { \ .name = "omap-mcbsp-dai", \ - .id = port_nr - 1, \ + .id = OMAP_MCBSP##port_nr, \ } #define MCBSP_CONFIG_TYPE2 0x2 @@ -332,6 +333,18 @@ struct omap_mcbsp_reg_cfg { }; typedef enum { + OMAP_MCBSP1 = 0, + OMAP_MCBSP2, + OMAP_MCBSP3, + OMAP_MCBSP4, + OMAP_MCBSP5 +} omap_mcbsp_id; + +typedef int __bitwise omap_mcbsp_io_type_t; +#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) +#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) + +typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, OMAP_MCBSP_WORD_16, @@ -340,6 +353,38 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; +typedef enum { + OMAP_MCBSP_CLK_RISING = 0, + OMAP_MCBSP_CLK_FALLING, +} omap_mcbsp_clk_polarity; + +typedef enum { + OMAP_MCBSP_FS_ACTIVE_HIGH = 0, + OMAP_MCBSP_FS_ACTIVE_LOW, +} omap_mcbsp_fs_polarity; + +typedef enum { + OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, + OMAP_MCBSP_CLK_STP_MODE_DELAY, +} omap_mcbsp_clk_stp_mode; + + +/******* SPI specific mode **********/ +typedef enum { + OMAP_MCBSP_SPI_MASTER = 0, + OMAP_MCBSP_SPI_SLAVE, +} omap_mcbsp_spi_mode; + +struct omap_mcbsp_spi_cfg { + omap_mcbsp_spi_mode spi_mode; + omap_mcbsp_clk_polarity rx_clock_polarity; + omap_mcbsp_clk_polarity tx_clock_polarity; + omap_mcbsp_fs_polarity fsx_polarity; + u8 clk_div; + omap_mcbsp_clk_stp_mode clk_stp_mode; + omap_mcbsp_word_length word_length; +}; + /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -377,13 +422,25 @@ struct omap_mcbsp { void __iomem *io_base; u8 id; u8 free; + omap_mcbsp_word_length rx_word_length; + omap_mcbsp_word_length tx_word_length; + omap_mcbsp_io_type_t io_type; /* IRQ or poll */ + /* IRQ based TX/RX */ int rx_irq; int tx_irq; /* DMA stuff */ u8 dma_rx_sync; + short dma_rx_lch; u8 dma_tx_sync; + short dma_tx_lch; + + /* Completion queues */ + struct completion tx_irq_completion; + struct completion rx_irq_completion; + struct completion tx_dma_completion; + struct completion rx_dma_completion; /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; @@ -442,9 +499,24 @@ int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); +void omap_mcbsp_xmit_word(unsigned int id, u32 word); +u32 omap_mcbsp_recv_word(unsigned int id); + +int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); +int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); +int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); + /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); +/* SPI specific API */ +void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); + +/* Polled read/write functions */ +int omap_mcbsp_pollread(unsigned int id, u16 * buf); +int omap_mcbsp_pollwrite(unsigned int id, u16 buf); +int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); /* McBSP signal muxing API */ void omap2_mcbsp1_mux_clkr_src(u8 mux); diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index 67fc5060183..d86d1ecf006 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -19,11 +19,15 @@ enum nand_io { }; struct omap_nand_platform_data { + unsigned int options; int cs; + int gpio_irq; struct mtd_partition *parts; struct gpmc_timings *gpmc_t; int nr_parts; - bool dev_ready; + int (*nand_setup)(void); + int (*dev_ready)(struct omap_nand_platform_data *); + int dma_channel; int gpmc_irq; enum nand_io xfer_type; unsigned long phys_base; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 0840df813f4..c0a75205303 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -40,7 +40,11 @@ * framework starts. The "_if_" is to avoid name collisions with the * PM idle-loop code. */ +#ifdef CONFIG_OMAP_PM_NONE +#define omap_pm_if_early_init() 0 +#else int __init omap_pm_if_early_init(void); +#endif /** * omap_pm_if_init - OMAP PM init code called after clock fw init @@ -48,7 +52,11 @@ int __init omap_pm_if_early_init(void); * The main initialization code. OPP tables are passed in here. The * "_if_" is to avoid name collisions with the PM idle-loop code. */ +#ifdef CONFIG_OMAP_PM_NONE +#define omap_pm_if_init() 0 +#else int __init omap_pm_if_init(void); +#endif /** * omap_pm_if_exit - OMAP PM exit code diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 9fe6c878323..2b1d9bc1eeb 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -10,6 +10,5 @@ struct omap4_keypad_platform_data { u8 cols; }; -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, - struct omap_board_data *); +extern int omap4_keyboard_init(struct omap4_keypad_platform_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0e329ca88a7..1adea9c6298 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -2,7 +2,6 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): BenoƮt Cousson, @@ -78,13 +77,9 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define HWMOD_IDLEMODE_FORCE (1 << 0) #define HWMOD_IDLEMODE_NO (1 << 1) #define HWMOD_IDLEMODE_SMART (1 << 2) +/* Slave idle mode flag only */ #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) -/* modulemode control type (SW or HW) */ -#define MODULEMODE_HWCTRL 1 -#define MODULEMODE_SWCTRL 2 - - /** * struct omap_hwmod_mux_info - hwmod specific mux configuration * @pads: array of omap_device_pad entries @@ -103,7 +98,7 @@ struct omap_hwmod_mux_info { /** * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod * @name: name of the IRQ channel (module local name) - * @irq: IRQ channel ID (should be non-negative except -1 = terminator) + * @irq_ch: IRQ channel ID * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -111,13 +106,13 @@ struct omap_hwmod_mux_info { */ struct omap_hwmod_irq_info { const char *name; - s16 irq; + u16 irq; }; /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID (should be non-negative except -1 = terminator) + * @dma_req: DMA request ID * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -125,7 +120,7 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - s16 dma_req; + u16 dma_req; }; /** @@ -225,6 +220,7 @@ struct omap_hwmod_addr_space { * @clk: interface clock: OMAP clock name * @_clk: pointer to the interface struct clk (filled in at runtime) * @fw: interface firewall data + * @addr_cnt: ARRAY_SIZE(@addr) * @width: OCP data width * @user: initiators using this interface (see OCP_USER_* macros above) * @flags: OCP interface flags (see OCPIF_* macros above) @@ -243,6 +239,7 @@ struct omap_hwmod_ocp_if { union { struct omap_hwmod_omap2_firewall omap2; } fw; + u8 addr_cnt; u8 width; u8 user; u8 flags; @@ -261,7 +258,6 @@ struct omap_hwmod_ocp_if { #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) -#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) /* omap_hwmod_sysconfig.sysc_flags capability flags */ #define SYSC_HAS_AUTOIDLE (1 << 0) @@ -366,11 +362,9 @@ struct omap_hwmod_omap2_prcm { * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { - u16 clkctrl_offs; - u16 rstctrl_offs; - u16 context_offs; + void __iomem *clkctrl_reg; + void __iomem *rstctrl_reg; u8 submodule_wkdep_bit; - u8 modulemode; }; @@ -474,8 +468,8 @@ struct omap_hwmod_class { * @name: name of the hwmod * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs - * @sdma_reqs: ptr to an array of System DMA request IDs + * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) + * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -488,6 +482,8 @@ struct omap_hwmod_class { * @_sysc_cache: internal-use hwmod flags * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) + * @mpu_irqs_cnt: number of @mpu_irqs + * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -523,8 +519,6 @@ struct omap_hwmod { const char *main_clk; struct clk *_clk; struct omap_hwmod_opt_clk *opt_clks; - char *clkdm_name; - struct clockdomain *clkdm; char *vdd_name; struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ @@ -537,6 +531,8 @@ struct omap_hwmod { u16 flags; u8 _mpu_port_index; u8 response_lat; + u8 mpu_irqs_cnt; + u8 sdma_reqs_cnt; u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; @@ -576,7 +572,6 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); -int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index a067484cc4a..ac4b60d9aa2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -148,7 +148,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); - DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); |