diff options
Diffstat (limited to 'arch/arm')
150 files changed, 4613 insertions, 946 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0fdd099d4a6..b404e5eec0c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -19,6 +19,8 @@ config ARM select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -146,6 +148,9 @@ config ARCH_HAS_CPUFREQ and that the relevant menu configurations are displayed for it. +config ARCH_HAS_CPU_IDLE_WAIT + def_bool y + config GENERIC_HWEIGHT bool default y @@ -272,7 +277,6 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -1004,7 +1008,7 @@ endif config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" - depends on CPU_V6 && !SMP + depends on CPU_V6 help Invalidation of the Instruction Cache operation can fail. This erratum is present in 1136 (before r1p4), 1156 and 1176. @@ -1052,6 +1056,32 @@ config ARM_ERRATA_460075 ACTLR register. Note that setting specific bits in the ACTLR register may not be available in non-secure mode. +config ARM_ERRATA_742230 + bool "ARM errata: DMB operation may be faulty" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 742230 Cortex-A9 + (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction + between two write operations may not ensure the correct visibility + ordering of the two writes. This workaround sets a specific bit in + the diagnostic register of the Cortex-A9 which causes the DMB + instruction to behave as a DSB, ensuring the correct behaviour of + the two writes. + +config ARM_ERRATA_742231 + bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 742231 Cortex-A9 + (r2p0..r2p2) erratum. Under certain conditions, specific to the + Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode, + accessing some data located in the same cache line, may get corrupted + data due to bad handling of the address hazard when the line gets + replaced from one of the CPUs at the same time as another CPU is + accessing it. This workaround sets specific bits in the diagnostic + register of the Cortex-A9 which reduces the linefill issuing + capabilities of the processor. + config PL310_ERRATA_588369 bool "Clean & Invalidate maintenance operations do not invalidate clean lines" depends on CACHE_L2X0 && ARCH_OMAP4 @@ -1143,13 +1173,13 @@ source "kernel/time/Kconfig" config SMP bool "Symmetric Multi-Processing (EXPERIMENTAL)" - depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on EXPERIMENTAL depends on GENERIC_CLOCKEVENTS + depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + select HAVE_ARM_SCU help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1167,6 +1197,19 @@ config SMP If you don't know what to do here, say N. +config SMP_ON_UP + bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on SMP && !XIP && !THUMB2_KERNEL + default y + help + SMP kernels contain instructions which fail on non-SMP processors. + Enabling this option allows the kernel to modify itself to make + these instructions safe. Disabling it allows about 1K of space + savings. + + If you don't know what to do here, say Y. + config HAVE_ARM_SCU bool depends on SMP @@ -1217,12 +1260,9 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" - depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4) + depends on SMP default y - select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \ - ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS + select HAVE_ARM_TWD help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1577,97 +1617,6 @@ config AUTO_ZRELADDR 0xf8000000. This assumes the zImage being placed in the first 128MB from start of memory. -config ZRELADDR - hex "Physical address of the decompressed kernel image" - depends on !AUTO_ZRELADDR - default 0x00008000 if ARCH_BCMRING ||\ - ARCH_CNS3XXX ||\ - ARCH_DOVE ||\ - ARCH_EBSA110 ||\ - ARCH_FOOTBRIDGE ||\ - ARCH_INTEGRATOR ||\ - ARCH_IOP13XX ||\ - ARCH_IOP33X ||\ - ARCH_IXP2000 ||\ - ARCH_IXP23XX ||\ - ARCH_IXP4XX ||\ - ARCH_KIRKWOOD ||\ - ARCH_KS8695 ||\ - ARCH_LOKI ||\ - ARCH_MMP ||\ - ARCH_MV78XX0 ||\ - ARCH_NOMADIK ||\ - ARCH_NUC93X ||\ - ARCH_NS9XXX ||\ - ARCH_ORION5X ||\ - ARCH_SPEAR3XX ||\ - ARCH_SPEAR6XX ||\ - ARCH_TEGRA ||\ - ARCH_U8500 ||\ - ARCH_VERSATILE ||\ - ARCH_W90X900 - default 0x08008000 if ARCH_MX1 ||\ - ARCH_SHARK - default 0x10008000 if ARCH_MSM ||\ - ARCH_OMAP1 ||\ - ARCH_RPC - default 0x20008000 if ARCH_S5P6440 ||\ - ARCH_S5P6442 ||\ - ARCH_S5PC100 ||\ - ARCH_S5PV210 - default 0x30008000 if ARCH_S3C2410 ||\ - ARCH_S3C2400 ||\ - ARCH_S3C2412 ||\ - ARCH_S3C2416 ||\ - ARCH_S3C2440 ||\ - ARCH_S3C2443 - default 0x40008000 if ARCH_STMP378X ||\ - ARCH_STMP37XX ||\ - ARCH_SH7372 ||\ - ARCH_SH7377 ||\ - ARCH_S5PV310 - default 0x50008000 if ARCH_S3C64XX ||\ - ARCH_SH7367 - default 0x60008000 if ARCH_VEXPRESS - default 0x80008000 if ARCH_MX25 ||\ - ARCH_MX3 ||\ - ARCH_NETX ||\ - ARCH_OMAP2PLUS ||\ - ARCH_PNX4008 - default 0x90008000 if ARCH_MX5 ||\ - ARCH_MX91231 - default 0xa0008000 if ARCH_IOP32X ||\ - ARCH_PXA ||\ - MACH_MX27 - default 0xc0008000 if ARCH_LH7A40X ||\ - MACH_MX21 - default 0xf0008000 if ARCH_AAEC2000 ||\ - ARCH_L7200 - default 0xc0028000 if ARCH_CLPS711X - default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45) - default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45) - default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX - default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX - default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET - default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET - default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET - default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET - default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET - default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP - default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP - default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET - default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET - default 0xc0208000 if ARCH_SA1100 && SA1111 - default 0xc0008000 if ARCH_SA1100 && !SA1111 - default 0x30108000 if ARCH_S3C2410 && PM_H1940 - default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM - default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM - help - ZRELADDR is the physical address where the decompressed kernel - image will be placed. ZRELADDR has to be specified when the - assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is - selected. - endmenu menu "CPU Power Management" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 91344af75f3..4dbce538fec 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -27,6 +27,11 @@ config ARM_UNWIND the performance is not affected. Currently, this feature only works with EABI compilers. If unsure say Y. +config OLD_MCOUNT + bool + depends on FUNCTION_TRACER && FRAME_POINTER + default y + config DEBUG_USER bool "Verbose user fault messages" help diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index f705213caa8..4a590f4113e 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -14,16 +14,18 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh ifneq ($(MACHINE),) --include $(srctree)/$(MACHINE)/Makefile.boot +include $(srctree)/$(MACHINE)/Makefile.boot endif # Note: the following conditions must always be true: +# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM +ZRELADDR := $(zreladdr-y) PARAMS_PHYS := $(params_phys-y) INITRD_PHYS := $(initrd_phys-y) -export INITRD_PHYS PARAMS_PHYS +export ZRELADDR INITRD_PHYS PARAMS_PHYS targets := Image zImage xipImage bootpImage uImage @@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE $@ ifeq ($(CONFIG_ZBOOT_ROM),y) $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT) else -$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR) +$(obj)/uImage: LOADADDR=$(ZRELADDR) endif ifeq ($(CONFIG_THUMB2_KERNEL),y) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 68775e33476..65a7c1c588a 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -79,6 +79,10 @@ endif EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := -Wa,-march=all +# Supply ZRELADDR to the decompressor via a linker symbol. +ifneq ($(CONFIG_AUTO_ZRELADDR),y) +LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR) +endif ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif @@ -112,5 +116,5 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) -$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config +$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) @sed "$(SEDFLAGS)" < $< > $@ diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6af9907c3b5..6825c34646d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -177,7 +177,7 @@ not_angel: and r4, pc, #0xf8000000 add r4, r4, #TEXT_OFFSET #else - ldr r4, =CONFIG_ZRELADDR + ldr r4, =zreladdr #endif subs r0, r0, r1 @ calculate the delta offset diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 6c091356245..1bec96e8519 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -263,6 +263,22 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } +int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", + __func__, dma_addr, size); + return (dev->bus == &pci_bus_type) && + ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); +} + +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (mask >= PHYS_OFFSET + SZ_64M - 1) + return 0; + + return -EIO; +} + int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { it8152_io.start = IT8152_IO_BASE + 0x12000; diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c index 5ebbab6242a..8f0f86db360 100644 --- a/arch/arm/common/pl330.c +++ b/arch/arm/common/pl330.c @@ -146,8 +146,7 @@ #define DESIGNER 0x41 #define REVISION 0x0 #define INTEG_CFG 0x0 -#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \ - | (REVISION << 20) | (INTEG_CFG << 24)) +#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12)) #define PCELL_ID_VAL 0xb105f00d @@ -1859,10 +1858,10 @@ int pl330_add(struct pl330_info *pi) regs = pi->base; /* Check if we can handle this DMAC */ - if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL + if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL || get_id(pi, PCELL_ID) != PCELL_ID_VAL) { dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n", - readl(regs + PERIPH_ID), readl(regs + PCELL_ID)); + get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID)); return -EINVAL; } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 517d50ddbeb..c0258a8c103 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -678,7 +678,7 @@ out: * %-EBUSY physical address already marked in-use. * %0 successful. */ -static int +static int __devinit __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111 *sachip; diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index 9312ef9f9bf..5ca7a61f7c0 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index fb75192ee7e..fcaa6032805 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_ARM_INTEGRATOR=y +CONFIG_ARM_CHARLCD=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y @@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_VERSATILE=y +CONFIG_SPI=y +CONFIG_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ARMCLCD=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set @@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y -CONFIG_INOTIFY=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PL031=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CRAMFS=y @@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 46e5e074726..c1c252cdca6 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y CONFIG_FPE_NWFPE=y CONFIG_PM=y # CONFIG_SUSPEND is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MISC_DEVICES is not set # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_HW_RANDOM is not set CONFIG_I2C=y -CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_REGULATOR=y @@ -66,24 +48,10 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set -# CONFIG_SND_DRIVERS is not set -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y -CONFIG_MMC_DEBUG=y CONFIG_MMC_ARMMMCI=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set CONFIG_RTC_DRV_COH901331=y @@ -93,12 +61,11 @@ CONFIG_COH901318=y CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -# CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set CONFIG_TIMER_STATS=y # CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6e8f05c8a1c..062b58c029a 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -154,16 +154,39 @@ .long 9999b,9001f; \ .popsection +#ifdef CONFIG_SMP +#define ALT_SMP(instr...) \ +9998: instr +#define ALT_UP(instr...) \ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + instr ;\ + .popsection +#define ALT_UP_B(label) \ + .equ up_b_offset, label - 9998b ;\ + .pushsection ".alt.smp.init", "a" ;\ + .long 9998b ;\ + b . + up_b_offset ;\ + .popsection +#else +#define ALT_SMP(instr...) +#define ALT_UP(instr...) instr +#define ALT_UP_B(label) b label +#endif + /* * SMP data memory barrier */ .macro smp_dmb #ifdef CONFIG_SMP #if __LINUX_ARM_ARCH__ >= 7 - dmb + ALT_SMP(dmb) #elif __LINUX_ARM_ARCH__ == 6 - mcr p15, 0, r0, c7, c10, 5 @ dmb + ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb +#else +#error Incompatible SMP platform #endif + ALT_UP(nop) #endif .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 4656a24058d..3acd8fa25e3 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -137,10 +137,10 @@ #endif /* - * This flag is used to indicate that the page pointed to by a pte - * is dirty and requires cleaning before returning it to the user. + * This flag is used to indicate that the page pointed to by a pte is clean + * and does not require cleaning before returning it to the user. */ -#define PG_dcache_dirty PG_arch_1 +#define PG_dcache_clean PG_arch_1 /* * MM Cache Management @@ -156,6 +156,12 @@ * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + * Currently only needed for cache-v6.S and cache-v7.S, see + * __flush_icache_all for the generic implementation. + * * flush_kern_all() * * Unconditionally clean and invalidate the entire cache. @@ -206,6 +212,7 @@ */ struct cpu_cache_fns { + void (*flush_icache_all)(void); void (*flush_kern_all)(void); void (*flush_user_all)(void); void (*flush_user_range)(unsigned long, unsigned long, unsigned int); @@ -227,6 +234,7 @@ struct cpu_cache_fns { extern struct cpu_cache_fns cpu_cache; +#define __cpuc_flush_icache_all cpu_cache.flush_icache_all #define __cpuc_flush_kern_all cpu_cache.flush_kern_all #define __cpuc_flush_user_all cpu_cache.flush_user_all #define __cpuc_flush_user_range cpu_cache.flush_user_range @@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache; #else +#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) #define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) @@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) +extern void __cpuc_flush_icache_all(void); extern void __cpuc_flush_kern_all(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); @@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *, /* * Convert calls to our calling convention. */ + +/* Invalidate I-cache */ +#define __flush_icache_all_generic() \ + asm("mcr p15, 0, %0, c7, c5, 0" \ + : : "r" (0)); + +/* Invalidate I-cache inner shareable */ +#define __flush_icache_all_v7_smp() \ + asm("mcr p15, 0, %0, c7, c1, 0" \ + : : "r" (0)); + +/* + * Optimized __flush_icache_all for the common cases. Note that UP ARMv7 + * will fall through to use __flush_icache_all_generic. + */ +#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \ + defined(CONFIG_SMP_ON_UP) +#define __flush_icache_preferred __cpuc_flush_icache_all +#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) +#define __flush_icache_preferred __flush_icache_all_v7_smp +#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920) +#define __flush_icache_preferred __cpuc_flush_icache_all +#else +#define __flush_icache_preferred __flush_icache_all_generic +#endif + +static inline void __flush_icache_all(void) +{ + __flush_icache_preferred(); +} + #define flush_cache_all() __cpuc_flush_kern_all() static inline void vivt_flush_cache_mm(struct mm_struct *mm) @@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 extern void flush_dcache_page(struct page *); -static inline void __flush_icache_all(void) -{ -#ifdef CONFIG_ARM_ERRATA_411920 - extern void v6_icache_inval_all(void); - v6_icache_inval_all(); -#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7 - asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n" - : - : "r" (0)); -#else - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - : - : "r" (0)); -#endif -} static inline void flush_kernel_vmap_range(void *addr, int size) { if ((cache_is_vivt() || cache_is_vipt_aliasing())) @@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma, #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE static inline void flush_kernel_dcache_page(struct page *page) { - /* highmem pages are always flushed upon kunmap already */ - if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page)) - __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); } #define flush_dcache_mmap_lock(mapping) \ diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index d3a4c2cb9f2..c023db09fcc 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -6,6 +6,7 @@ #define CACHEID_VIPT_ALIASING (1 << 2) #define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING) #define CACHEID_ASID_TAGGED (1 << 3) +#define CACHEID_VIPT_I_ALIASING (1 << 4) extern unsigned int cacheid; @@ -14,15 +15,18 @@ extern unsigned int cacheid; #define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING) #define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING) #define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED) +#define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING) /* * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture * Mask out support which will never be present on newer CPUs. * - v6+ is never VIVT - * - v7+ VIPT never aliases + * - v7+ VIPT never aliases on D-side */ #if __LINUX_ARM_ARCH__ >= 7 -#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED) +#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\ + CACHEID_ASID_TAGGED |\ + CACHEID_VIPT_I_ALIASING) #elif __LINUX_ARM_ARCH__ >= 6 #define __CACHEID_ARCH_MIN (~CACHEID_VIVT) #else diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index c226fe10553..c568da7dcae 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *); * DMA access and 1 if the buffer needs to be bounced. * */ -#ifdef CONFIG_SA1111 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); -#else -static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr, - size_t size) -{ - return 0; -} -#endif /* * The DMA API, implemented by dmabounce.c. See below for descriptions. diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 103f7ee9731..f89515adac6 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -2,12 +2,30 @@ #define _ASM_ARM_FTRACE #ifdef CONFIG_FUNCTION_TRACER -#define MCOUNT_ADDR ((long)(mcount)) +#define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ #ifndef __ASSEMBLY__ extern void mcount(void); extern void __gnu_mcount_nc(void); + +#ifdef CONFIG_DYNAMIC_FTRACE +struct dyn_arch_ftrace { +#ifdef CONFIG_OLD_MCOUNT + bool old_mcount; +#endif +}; + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* With Thumb-2, the recorded addresses have the lsb set */ + return addr & ~1; +} + +extern void ftrace_caller_old(void); +extern void ftrace_call_old(void); +#endif + #endif #endif diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h index 212e47828c7..7ecd793b8f5 100644 --- a/arch/arm/include/asm/hardware/coresight.h +++ b/arch/arm/include/asm/hardware/coresight.h @@ -21,18 +21,6 @@ #define TRACER_RUNNING BIT(TRACER_RUNNING_BIT) #define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT) -struct tracectx { - unsigned int etb_bufsz; - void __iomem *etb_regs; - void __iomem *etm_regs; - unsigned long flags; - int ncmppairs; - int etm_portsz; - struct device *dev; - struct clk *emu_clk; - struct mutex mutex; -}; - #define TRACER_TIMEOUT 10000 #define etm_writel(t, v, x) \ @@ -112,10 +100,10 @@ struct tracectx { /* ETM status register, "ETM Architecture", 3.3.2 */ #define ETMR_STATUS (0x10) -#define ETMST_OVERFLOW (1 << 0) -#define ETMST_PROGBIT (1 << 1) -#define ETMST_STARTSTOP (1 << 2) -#define ETMST_TRIGGER (1 << 3) +#define ETMST_OVERFLOW BIT(0) +#define ETMST_PROGBIT BIT(1) +#define ETMST_STARTSTOP BIT(2) +#define ETMST_TRIGGER BIT(3) #define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT) #define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP) @@ -123,7 +111,7 @@ struct tracectx { #define ETMR_TRACEENCTRL2 0x1c #define ETMR_TRACEENCTRL 0x24 -#define ETMTE_INCLEXCL (1 << 24) +#define ETMTE_INCLEXCL BIT(24) #define ETMR_TRACEENEVT 0x20 #define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \ ETMCTRL_DATA_DO_ADDR | \ @@ -146,12 +134,12 @@ struct tracectx { #define ETBR_CTRL 0x20 #define ETBR_FORMATTERCTRL 0x304 #define ETBFF_ENFTC 1 -#define ETBFF_ENFCONT (1 << 1) -#define ETBFF_FONFLIN (1 << 4) -#define ETBFF_MANUAL_FLUSH (1 << 6) -#define ETBFF_TRIGIN (1 << 8) -#define ETBFF_TRIGEVT (1 << 9) -#define ETBFF_TRIGFL (1 << 10) +#define ETBFF_ENFCONT BIT(1) +#define ETBFF_FONFLIN BIT(4) +#define ETBFF_MANUAL_FLUSH BIT(6) +#define ETBFF_TRIGIN BIT(8) +#define ETBFF_TRIGEVT BIT(9) +#define ETBFF_TRIGFL BIT(10) #define etb_writel(t, v, x) \ (__raw_writel((v), (t)->etb_regs + (x))) diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index e4dfa69abb6..cbb0bc295d2 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -7,20 +7,27 @@ struct unwind_table; -struct mod_arch_specific -{ #ifdef CONFIG_ARM_UNWIND - Elf_Shdr *unw_sec_init; - Elf_Shdr *unw_sec_devinit; - Elf_Shdr *unw_sec_core; - Elf_Shdr *sec_init_text; - Elf_Shdr *sec_devinit_text; - Elf_Shdr *sec_core_text; - struct unwind_table *unwind_init; - struct unwind_table *unwind_devinit; - struct unwind_table *unwind_core; -#endif +struct arm_unwind_mapping { + Elf_Shdr *unw_sec; + Elf_Shdr *sec_text; + struct unwind_table *unwind; +}; +enum { + ARM_SEC_INIT, + ARM_SEC_DEVINIT, + ARM_SEC_CORE, + ARM_SEC_EXIT, + ARM_SEC_DEVEXIT, + ARM_SEC_MAX, +}; +struct mod_arch_specific { + struct arm_unwind_mapping map[ARM_SEC_MAX]; }; +#else +struct mod_arch_specific { +}; +#endif /* * Include the ARM architecture version. diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 48837e6d888..b5799a3b711 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -17,7 +17,7 @@ * counter interrupts are regular interrupts and not an NMI. This * means that when we receive the interrupt we can call * perf_event_do_pending() that handles all of the work with - * interrupts enabled. + * interrupts disabled. */ static inline void set_perf_event_pending(void) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index ab68cf1ef80..a9672e8406a 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -278,9 +278,24 @@ extern struct page *empty_zero_page; #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext) -#define set_pte_at(mm,addr,ptep,pteval) do { \ - set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \ - } while (0) +#if __LINUX_ARM_ARCH__ < 6 +static inline void __sync_icache_dcache(pte_t pteval) +{ +} +#else +extern void __sync_icache_dcache(pte_t pteval); +#endif + +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + if (addr >= TASK_SIZE) + set_pte_ext(ptep, pteval, 0); + else { + __sync_icache_dcache(pteval); + set_pte_ext(ptep, pteval, PTE_EXT_NG); + } +} /* * The following only work if pte_present() is true. @@ -290,8 +305,13 @@ extern struct page *empty_zero_page; #define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) #define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (pte_val(pte) & L_PTE_EXEC) #define pte_special(pte) (0) +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -317,6 +337,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE) +#define __HAVE_PHYS_MEM_ACCESS_PROT +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); #else #define pgprot_dmacoherent(prot) \ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED) diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h new file mode 100644 index 00000000000..6a9307d6490 --- /dev/null +++ b/arch/arm/include/asm/smp_mpidr.h @@ -0,0 +1,17 @@ +#ifndef ASMARM_SMP_MIDR_H +#define ASMARM_SMP_MIDR_H + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("\n" \ + "1: mrc p15, 0, %0, c0, c0, 5\n" \ + " .pushsection \".alt.smp.init\", \"a\"\n"\ + " .long 1b\n" \ + " mov %0, #0\n" \ + " .popsection" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +#endif diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index e6215305544..f24c1b9e211 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -7,15 +7,40 @@ #include <asm/cputype.h> +/* + * Return true if we are running on a SMP platform + */ +static inline bool is_smp(void) +{ +#ifndef CONFIG_SMP + return false; +#elif defined(CONFIG_SMP_ON_UP) + extern unsigned int smp_on_up; + return !!smp_on_up; +#else + return true; +#endif +} + /* all SMP configurations have the extended CPUID registers */ static inline int tlb_ops_need_broadcast(void) { + if (!is_smp()) + return 0; + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2; } +#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7 +#define cache_ops_need_broadcast() 0 +#else static inline int cache_ops_need_broadcast(void) { + if (!is_smp()) + return 0; + return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1; } +#endif #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index b516cdea5ae..1120f18a6b1 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -329,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size extern void disable_hlt(void); extern void enable_hlt(void); +void cpu_idle_wait(void); + #include <asm-generic/cmpxchg-local.h> #if __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 33b546ae72d..ce7378ea15a 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -70,6 +70,10 @@ #undef _TLB #undef MULTI_TLB +#ifdef CONFIG_SMP_ON_UP +#define MULTI_TLB 1 +#endif + #define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE) #ifdef CONFIG_CPU_TLB_V3 @@ -185,17 +189,23 @@ # define v6wbi_always_flags (-1UL) #endif -#ifdef CONFIG_SMP -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) -#else -#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) -#endif #ifdef CONFIG_CPU_TLB_V7 -# define v7wbi_possible_flags v7wbi_tlb_flags -# define v7wbi_always_flags v7wbi_tlb_flags + +# ifdef CONFIG_SMP_ON_UP +# define v7wbi_possible_flags (v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up) +# define v7wbi_always_flags (v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up) +# elif defined(CONFIG_SMP) +# define v7wbi_possible_flags v7wbi_tlb_flags_smp +# define v7wbi_always_flags v7wbi_tlb_flags_smp +# else +# define v7wbi_possible_flags v7wbi_tlb_flags_up +# define v7wbi_always_flags v7wbi_tlb_flags_up +# endif # ifdef _TLB # define MULTI_TLB 1 # else @@ -560,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); #endif /* - * if PG_dcache_dirty is set for the page, we need to ensure that any + * If PG_dcache_clean is not set for the page, we need to ensure that any * cache entries for the kernels virtual memory range are written - * back to the page. + * back to the page. On ARMv6 and later, the cache coherency is handled via + * the set_pte_at() function. */ +#if __LINUX_ARM_ARCH__ < 6 extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep); +#else +static inline void update_mmu_cache(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} +#endif #endif diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index d02cfb68348..c891eb76c0e 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -393,6 +393,9 @@ #define __NR_perf_event_open (__NR_SYSCALL_BASE+364) #define __NR_recvmmsg (__NR_SYSCALL_BASE+365) #define __NR_accept4 (__NR_SYSCALL_BASE+366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 8214bfebfac..e5e1e538767 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be); #endif #ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_OLD_MCOUNT EXPORT_SYMBOL(mcount); +#endif EXPORT_SYMBOL(__gnu_mcount_nc); #endif diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index afeb71fa72c..5c26eccef99 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -376,6 +376,9 @@ CALL(sys_perf_event_open) /* 365 */ CALL(sys_recvmmsg) CALL(sys_accept4) + CALL(sys_fanotify_init) + CALL(sys_fanotify_mark) + CALL(sys_prlimit64) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bb8e93a7640..c09e3573c5d 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -46,7 +46,8 @@ * this macro assumes that irqstat (r6) and base (r5) are * preserved from get_irqnr_and_base above */ - test_for_ipi r0, r6, r5, lr + ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_UP_B(9997f) movne r0, sp adrne lr, BSYM(1b) bne do_IPI @@ -57,6 +58,7 @@ adrne lr, BSYM(1b) bne do_local_timer #endif +9997: #endif .endm @@ -965,11 +967,8 @@ kuser_cmpxchg_fixup: beq 1b rsbs r0, r3, #0 /* beware -- each __kuser slot must be 8 instructions max */ -#ifdef CONFIG_SMP - b __kuser_memory_barrier -#else - usr_ret lr -#endif + ALT_SMP(b __kuser_memory_barrier) + ALT_UP(usr_ret lr) #endif diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f05a35a5969..2d23ad98518 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -48,6 +48,8 @@ work_pending: beq no_work_pending mov r0, sp @ 'regs' mov r2, why @ 'syscall' + tst r1, #_TIF_SIGPENDING @ delivering a signal? + movne why, #0 @ prevent further restarts bl do_notify_resume b ret_slow_syscall @ Check work again @@ -127,30 +129,58 @@ ENDPROC(ret_from_fork) * clobber the ip register. This is OK because the ARM calling convention * allows it to be clobbered in subroutines and doesn't use it to hold * parameters.) + * + * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0" + * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see + * arch/arm/kernel/ftrace.c). */ + +#ifndef CONFIG_OLD_MCOUNT +#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4)) +#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0. +#endif +#endif + #ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(mcount) +ENTRY(__gnu_mcount_nc) + mov ip, lr + ldmia sp!, {lr} + mov pc, ip +ENDPROC(__gnu_mcount_nc) + +ENTRY(ftrace_caller) stmdb sp!, {r0-r3, lr} mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE + ldr r1, [sp, #20] - .globl mcount_call -mcount_call: + .global ftrace_call +ftrace_call: bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + ldmia sp!, {r0-r3, ip, lr} + mov pc, ip +ENDPROC(ftrace_caller) -ENTRY(ftrace_caller) +#ifdef CONFIG_OLD_MCOUNT +ENTRY(mcount) + stmdb sp!, {lr} + ldr lr, [fp, #-4] + ldmia sp!, {pc} +ENDPROC(mcount) + +ENTRY(ftrace_caller_old) stmdb sp!, {r0-r3, lr} ldr r1, [fp, #-4] mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - .globl ftrace_call -ftrace_call: + .globl ftrace_call_old +ftrace_call_old: bl ftrace_stub ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(ftrace_caller_old) +#endif #else @@ -158,7 +188,7 @@ ENTRY(__gnu_mcount_nc) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function ldr r2, [r0] - adr r0, ftrace_stub + adr r0, .Lftrace_stub cmp r0, r2 bne gnu_trace ldmia sp!, {r0-r3, ip, lr} @@ -168,11 +198,19 @@ gnu_trace: ldr r1, [sp, #20] @ lr of instrumented routine mov r0, lr sub r0, r0, #MCOUNT_INSN_SIZE - mov lr, pc + adr lr, BSYM(1f) mov pc, r2 +1: ldmia sp!, {r0-r3, ip, lr} mov pc, ip +ENDPROC(__gnu_mcount_nc) +#ifdef CONFIG_OLD_MCOUNT +/* + * This is under an ifdef in order to force link-time errors for people trying + * to build with !FRAME_POINTER with a GCC which doesn't use the new-style + * mcount. + */ ENTRY(mcount) stmdb sp!, {r0-r3, lr} ldr r0, =ftrace_trace_function @@ -191,12 +229,15 @@ trace: mov pc, r2 ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} +ENDPROC(mcount) +#endif #endif /* CONFIG_DYNAMIC_FTRACE */ - .globl ftrace_stub -ftrace_stub: +ENTRY(ftrace_stub) +.Lftrace_stub: mov pc, lr +ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -418,11 +459,13 @@ ENDPROC(sys_clone_wrapper) sys_sigreturn_wrapper: add r0, sp, #S_OFF + mov why, #0 @ prevent syscall restart handling b sys_sigreturn ENDPROC(sys_sigreturn_wrapper) sys_rt_sigreturn_wrapper: add r0, sp, #S_OFF + mov why, #0 @ prevent syscall restart handling b sys_rt_sigreturn ENDPROC(sys_rt_sigreturn_wrapper) diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 33c7077174d..a48d5125798 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -30,6 +30,21 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shishkin"); +/* + * ETM tracer state + */ +struct tracectx { + unsigned int etb_bufsz; + void __iomem *etb_regs; + void __iomem *etm_regs; + unsigned long flags; + int ncmppairs; + int etm_portsz; + struct device *dev; + struct clk *emu_clk; + struct mutex mutex; +}; + static struct tracectx tracer; static inline bool trace_isrunning(struct tracectx *t) diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 0298286ad4a..971ac8c36ea 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -2,102 +2,194 @@ * Dynamic function tracing support. * * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com> + * Copyright (C) 2010 Rabin Vincent <rabin@rab.in> * * For licencing details, see COPYING. * * Defines low-level handling of mcount calls when the kernel * is compiled with the -pg flag. When using dynamic ftrace, the - * mcount call-sites get patched lazily with NOP till they are - * enabled. All code mutation routines here take effect atomically. + * mcount call-sites get patched with NOP till they are enabled. + * All code mutation routines here are called under stop_machine(). */ #include <linux/ftrace.h> +#include <linux/uaccess.h> #include <asm/cacheflush.h> #include <asm/ftrace.h> -#define PC_OFFSET 8 -#define BL_OPCODE 0xeb000000 -#define BL_OFFSET_MASK 0x00ffffff +#ifdef CONFIG_THUMB2_KERNEL +#define NOP 0xeb04f85d /* pop.w {lr} */ +#else +#define NOP 0xe8bd4000 /* pop {lr} */ +#endif -static unsigned long bl_insn; -static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ +#ifdef CONFIG_OLD_MCOUNT +#define OLD_MCOUNT_ADDR ((unsigned long) mcount) +#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) -unsigned char *ftrace_nop_replace(void) +#define OLD_NOP 0xe1a00000 /* mov r0, r0 */ + +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) { - return (char *)&NOP; + return rec->arch.old_mcount ? OLD_NOP : NOP; } +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + if (!rec->arch.old_mcount) + return addr; + + if (addr == MCOUNT_ADDR) + addr = OLD_MCOUNT_ADDR; + else if (addr == FTRACE_ADDR) + addr = OLD_FTRACE_ADDR; + + return addr; +} +#else +static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec) +{ + return NOP; +} + +static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) +{ + return addr; +} +#endif + /* construct a branch (BL) instruction to addr */ -unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +#ifdef CONFIG_THUMB2_KERNEL +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) { + unsigned long s, j1, j2, i1, i2, imm10, imm11; + unsigned long first, second; long offset; - offset = (long)addr - (long)(pc + PC_OFFSET); + offset = (long)addr - (long)(pc + 4); + if (offset < -16777216 || offset > 16777214) { + WARN_ON_ONCE(1); + return 0; + } + + s = (offset >> 24) & 0x1; + i1 = (offset >> 23) & 0x1; + i2 = (offset >> 22) & 0x1; + imm10 = (offset >> 12) & 0x3ff; + imm11 = (offset >> 1) & 0x7ff; + + j1 = (!i1) ^ s; + j2 = (!i2) ^ s; + + first = 0xf000 | (s << 10) | imm10; + second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + + return (second << 16) | first; +} +#else +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + long offset; + + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace * doesn't generate branches outside of kernel text. */ WARN_ON_ONCE(1); - return NULL; + return 0; } - offset = (offset >> 2) & BL_OFFSET_MASK; - bl_insn = BL_OPCODE | offset; - return (unsigned char *)&bl_insn; -} -int ftrace_modify_code(unsigned long pc, unsigned char *old_code, - unsigned char *new_code) -{ - unsigned long err = 0, replaced = 0, old, new; + offset = (offset >> 2) & 0x00ffffff; - old = *(unsigned long *)old_code; - new = *(unsigned long *)new_code; + return 0xeb000000 | offset; +} +#endif - __asm__ __volatile__ ( - "1: ldr %1, [%2] \n" - " cmp %1, %4 \n" - "2: streq %3, [%2] \n" - " cmpne %1, %3 \n" - " movne %0, #2 \n" - "3:\n" +static int ftrace_modify_code(unsigned long pc, unsigned long old, + unsigned long new) +{ + unsigned long replaced; - ".pushsection .fixup, \"ax\"\n" - "4: mov %0, #1 \n" - " b 3b \n" - ".popsection\n" + if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE)) + return -EFAULT; - ".pushsection __ex_table, \"a\"\n" - " .long 1b, 4b \n" - " .long 2b, 4b \n" - ".popsection\n" + if (replaced != old) + return -EINVAL; - : "=r"(err), "=r"(replaced) - : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) - : "memory"); + if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE)) + return -EPERM; - if (!err && (replaced == old)) - flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); + flush_icache_range(pc, pc + MCOUNT_INSN_SIZE); - return err; + return 0; } int ftrace_update_ftrace_func(ftrace_func_t func) { - int ret; unsigned long pc, old; - unsigned char *new; + unsigned long new; + int ret; pc = (unsigned long)&ftrace_call; memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(pc, (unsigned long)func); - ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + + ret = ftrace_modify_code(pc, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) { + pc = (unsigned long)&ftrace_call_old; + memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + + ret = ftrace_modify_code(pc, old, new); + } +#endif + + return ret; +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long new, old; + unsigned long ip = rec->ip; + + old = ftrace_nop_replace(rec); + new = ftrace_call_replace(ip, adjust_address(rec, addr)); + + return ftrace_modify_code(rec->ip, old, new); +} + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long ip = rec->ip; + unsigned long old; + unsigned long new; + int ret; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + +#ifdef CONFIG_OLD_MCOUNT + if (ret == -EINVAL && addr == MCOUNT_ADDR) { + rec->arch.old_mcount = true; + + old = ftrace_call_replace(ip, adjust_address(rec, addr)); + new = ftrace_nop_replace(rec); + ret = ftrace_modify_code(ip, old, new); + } +#endif + return ret; } -/* run from ftrace_init with irqs disabled */ int __init ftrace_dyn_arch_init(void *data) { - ftrace_mcount_set(data); + *(unsigned long *)data = 0; + return 0; } diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index b9505aa267c..58a3e632b6d 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -20,7 +20,7 @@ __switch_data: .long __mmap_switched .long __data_loc @ r4 - .long _data @ r5 + .long _sdata @ r5 .long __bss_start @ r6 .long _end @ r7 .long processor_id @ r4 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index eb62bf94721..b44d21e1e34 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -86,6 +86,9 @@ ENTRY(stext) movs r8, r5 @ invalid machine (r5=0)? beq __error_a @ yes, error 'a' bl __vet_atags +#ifdef CONFIG_SMP_ON_UP + bl __fixup_smp +#endif bl __create_page_tables /* @@ -333,4 +336,51 @@ __create_page_tables: ENDPROC(__create_page_tables) .ltorg +#ifdef CONFIG_SMP_ON_UP +__fixup_smp: + mov r7, #0x00070000 + orr r6, r7, #0xff000000 @ mask 0xff070000 + orr r7, r7, #0x41000000 @ val 0x41070000 + and r0, r9, r6 + teq r0, r7 @ ARM CPU and ARMv6/v7? + bne __fixup_smp_on_up @ no, assume UP + + orr r6, r6, #0x0000ff00 + orr r6, r6, #0x000000f0 @ mask 0xff07fff0 + orr r7, r7, #0x0000b000 + orr r7, r7, #0x00000020 @ val 0x4107b020 + and r0, r9, r6 + teq r0, r7 @ ARM 11MPCore? + moveq pc, lr @ yes, assume SMP + + mrc p15, 0, r0, c0, c0, 5 @ read MPIDR + tst r0, #1 << 31 + movne pc, lr @ bit 31 => SMP + +__fixup_smp_on_up: + adr r0, 1f + ldmia r0, {r3, r6, r7} + sub r3, r0, r3 + add r6, r6, r3 + add r7, r7, r3 +2: cmp r6, r7 + ldmia r6!, {r0, r4} + strlo r4, [r0, r3] + blo 2b + mov pc, lr +ENDPROC(__fixup_smp) + +1: .word . + .word __smpalt_begin + .word __smpalt_end + + .pushsection .data + .globl smp_on_up +smp_on_up: + ALT_SMP(.long 1) + ALT_UP(.long 0) + .popsection + +#endif + #include "head-common.S" diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 6b4605893f1..d9bd786ce23 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, { #ifdef CONFIG_ARM_UNWIND Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum; + struct arm_unwind_mapping *maps = mod->arch.map; for (s = sechdrs; s < sechdrs_end; s++) { - if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_init = s; - else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_devinit = s; - else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0) - mod->arch.unw_sec_core = s; - else if (strcmp(".init.text", secstrings + s->sh_name) == 0) - mod->arch.sec_init_text = s; - else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0) - mod->arch.sec_devinit_text = s; - else if (strcmp(".text", secstrings + s->sh_name) == 0) - mod->arch.sec_core_text = s; + char const *secname = secstrings + s->sh_name; + + if (strcmp(".ARM.exidx.init.text", secname) == 0) + maps[ARM_SEC_INIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].unw_sec = s; + else if (strcmp(".ARM.exidx", secname) == 0) + maps[ARM_SEC_CORE].unw_sec = s; + else if (strcmp(".ARM.exidx.exit.text", secname) == 0) + maps[ARM_SEC_EXIT].unw_sec = s; + else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].unw_sec = s; + else if (strcmp(".init.text", secname) == 0) + maps[ARM_SEC_INIT].sec_text = s; + else if (strcmp(".devinit.text", secname) == 0) + maps[ARM_SEC_DEVINIT].sec_text = s; + else if (strcmp(".text", secname) == 0) + maps[ARM_SEC_CORE].sec_text = s; + else if (strcmp(".exit.text", secname) == 0) + maps[ARM_SEC_EXIT].sec_text = s; + else if (strcmp(".devexit.text", secname) == 0) + maps[ARM_SEC_DEVEXIT].sec_text = s; } #endif return 0; @@ -292,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, #ifdef CONFIG_ARM_UNWIND static void register_unwind_tables(struct module *mod) { - if (mod->arch.unw_sec_init && mod->arch.sec_init_text) - mod->arch.unwind_init = - unwind_table_add(mod->arch.unw_sec_init->sh_addr, - mod->arch.unw_sec_init->sh_size, - mod->arch.sec_init_text->sh_addr, - mod->arch.sec_init_text->sh_size); - if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text) - mod->arch.unwind_devinit = - unwind_table_add(mod->arch.unw_sec_devinit->sh_addr, - mod->arch.unw_sec_devinit->sh_size, - mod->arch.sec_devinit_text->sh_addr, - mod->arch.sec_devinit_text->sh_size); - if (mod->arch.unw_sec_core && mod->arch.sec_core_text) - mod->arch.unwind_core = - unwind_table_add(mod->arch.unw_sec_core->sh_addr, - mod->arch.unw_sec_core->sh_size, - mod->arch.sec_core_text->sh_addr, - mod->arch.sec_core_text->sh_size); + int i; + for (i = 0; i < ARM_SEC_MAX; ++i) { + struct arm_unwind_mapping *map = &mod->arch.map[i]; + if (map->unw_sec && map->sec_text) + map->unwind = unwind_table_add(map->unw_sec->sh_addr, + map->unw_sec->sh_size, + map->sec_text->sh_addr, + map->sec_text->sh_size); + } } static void unregister_unwind_tables(struct module *mod) { - unwind_table_del(mod->arch.unwind_init); - unwind_table_del(mod->arch.unwind_devinit); - unwind_table_del(mod->arch.unwind_core); + int i = ARM_SEC_MAX; + while (--i >= 0) + unwind_table_del(mod->arch.map[i].unwind); } #else static inline void register_unwind_tables(struct module *mod) { } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 417c392ddf1..ecbb0288e5d 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc, { struct hw_perf_event fake_event = event->hw; - if (event->pmu && event->pmu != &pmu) - return 0; + if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF) + return 1; return armpmu->get_event_idx(cpuc, &fake_event) >= 0; } @@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num, /* * Handle the pending perf events. * - * Note: this call *must* be run with interrupts enabled. For - * platforms that can have the PMU interrupts raised as a PMI, this + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this * will not work. */ perf_event_do_pending(); @@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) /* * Handle the pending perf events. * - * Note: this call *must* be run with interrupts enabled. For - * platforms that can have the PMU interrupts raised as a PMI, this + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this * will not work. */ perf_event_do_pending(); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 974af1c3eb1..3af34bf4f4d 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -136,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off); void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart; EXPORT_SYMBOL_GPL(arm_pm_restart); +static void do_nothing(void *unused) +{ +} + +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ +void cpu_idle_wait(void) +{ + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 1); +} +EXPORT_SYMBOL_GPL(cpu_idle_wait); /* * This is our default idle handler. We need to disable diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d5231ae7355..336f14e0e5c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include <asm/procinfo.h> #include <asm/sections.h> #include <asm/setup.h> +#include <asm/smp_plat.h> #include <asm/mach-types.h> #include <asm/cacheflush.h> #include <asm/cachetype.h> @@ -238,6 +239,35 @@ int cpu_architecture(void) return cpu_arch; } +static int cpu_has_aliasing_icache(unsigned int arch) +{ + int aliasing_icache; + unsigned int id_reg, num_sets, line_size; + + /* arch specifies the register format */ + switch (arch) { + case CPU_ARCH_ARMv7: + asm("mcr p15, 2, %0, c0, c0, 0 @ set CSSELR" + : /* No output operands */ + : "r" (1)); + isb(); + asm("mrc p15, 1, %0, c0, c0, 0 @ read CCSIDR" + : "=r" (id_reg)); + line_size = 4 << ((id_reg & 0x7) + 2); + num_sets = ((id_reg >> 13) & 0x7fff) + 1; + aliasing_icache = (line_size * num_sets) > PAGE_SIZE; + break; + case CPU_ARCH_ARMv6: + aliasing_icache = read_cpuid_cachetype() & (1 << 11); + break; + default: + /* I-cache aliases will be handled by D-cache aliasing code */ + aliasing_icache = 0; + } + + return aliasing_icache; +} + static void __init cacheid_init(void) { unsigned int cachetype = read_cpuid_cachetype(); @@ -249,10 +279,15 @@ static void __init cacheid_init(void) cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - } else if (cachetype & (1 << 23)) + else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } else if (cachetype & (1 << 23)) { cacheid = CACHEID_VIPT_ALIASING; - else + } else { cacheid = CACHEID_VIPT_NONALIASING; + if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) + cacheid |= CACHEID_VIPT_I_ALIASING; + } } else { cacheid = CACHEID_VIVT; } @@ -263,7 +298,7 @@ static void __init cacheid_init(void) cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown", cache_is_vivt() ? "VIVT" : icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" : - cache_is_vipt_aliasing() ? "VIPT aliasing" : + icache_is_vipt_aliasing() ? "VIPT aliasing" : cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown"); } @@ -490,7 +525,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc) kernel_code.start = virt_to_phys(_text); kernel_code.end = virt_to_phys(_etext - 1); - kernel_data.start = virt_to_phys(_data); + kernel_data.start = virt_to_phys(_sdata); kernel_data.end = virt_to_phys(_end - 1); for (i = 0; i < mi->nr_banks; i++) { @@ -825,7 +860,8 @@ void __init setup_arch(char **cmdline_p) request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP - smp_init_cpus(); + if (is_smp()) + smp_init_cpus(); #endif reserve_crashkernel(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 40dc74f2b27..32e16da5cbc 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -567,7 +567,8 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(&mask, IPI_CPU_STOP); + if (!cpus_empty(mask)) + send_ipi_message(&mask, IPI_CPU_STOP); } /* diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index dd81a918c10..2a161765f6d 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) addr < table->end_addr) { idx = search_index(addr, table->start, table->stop - 1); + /* Move-to-front to exploit common traces */ + list_move(&table->list, &unwind_tables); break; } } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b16c07914b5..065d35de0e0 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -40,6 +40,11 @@ SECTIONS __tagtable_begin = .; *(.taglist.init) __tagtable_end = .; +#ifdef CONFIG_SMP_ON_UP + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; +#endif INIT_SETUP(16) @@ -104,8 +109,6 @@ SECTIONS RO_DATA(PAGE_SIZE) - _etext = .; /* End of text and rodata section */ - #ifdef CONFIG_ARM_UNWIND /* * Stack unwinding tables @@ -123,6 +126,8 @@ SECTIONS } #endif + _etext = .; /* End of text and rodata section */ + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; @@ -237,6 +242,12 @@ SECTIONS /* Default discards */ DISCARDS + +#ifndef CONFIG_SMP_ON_UP + /DISCARD/ : { + *(.alt.smp.init) + } +#endif } /* diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 939bccd7056..ca33862b4bf 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -248,6 +248,12 @@ config MACH_CPU9260 Select this if you are using a Eukrea Electromatique's CPU9260 Board <http://www.eukrea.com/> +config MACH_FLEXIBITY + bool "Flexibity Connect board" + help + Select this if you are using Flexibity Connect board + <http://www.flexibity.com> + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ca2ac003f41..7cbe06d7cee 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o +obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o # AT91SAM9261 board-specific support obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 753c0d31a3d..c67b47f1c0f 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -121,8 +121,8 @@ static struct clk ssc1_clk = { .pmc_mask = 1 << AT91SAM9G45_ID_SSC1, .type = CLK_TYPE_PERIPHERAL, }; -static struct clk tcb_clk = { - .name = "tcb_clk", +static struct clk tcb0_clk = { + .name = "tcb0_clk", .pmc_mask = 1 << AT91SAM9G45_ID_TCB, .type = CLK_TYPE_PERIPHERAL, }; @@ -192,6 +192,14 @@ static struct clk ohci_clk = { .parent = &uhphs_clk, }; +/* One additional fake clock for second TC block */ +static struct clk tcb1_clk = { + .name = "tcb1_clk", + .pmc_mask = 0, + .type = CLK_TYPE_PERIPHERAL, + .parent = &tcb0_clk, +}; + static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = { &spi1_clk, &ssc0_clk, &ssc1_clk, - &tcb_clk, + &tcb0_clk, &pwm_clk, &tsc_clk, &dma_clk, @@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = { &mmc1_clk, // irq0 &ohci_clk, + &tcb1_clk, }; /* diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 809114d5a5a..1276babf84d 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = { .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1, .flags = IORESOURCE_MEM, }, - [2] = { + [1] = { .start = AT91SAM9G45_ID_DMA, .end = AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, @@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = { .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PA21, .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ + .udelay = 5, /* ~100 kHz */ }; static struct platform_device at91sam9g45_twi0_device = { @@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = { .sda_is_open_drain = 1, .scl_pin = AT91_PIN_PB11, .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ + .udelay = 5, /* ~100 kHz */ }; static struct platform_device at91sam9g45_twi1_device = { @@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); + at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); + at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c new file mode 100644 index 00000000000..216c8ca985f --- /dev/null +++ b/arch/arm/mach-at91/board-flexibity.c @@ -0,0 +1,164 @@ +/* + * linux/arch/arm/mach-at91/board-flexibity.c + * + * Copyright (C) 2010 Flexibity + * Copyright (C) 2005 SAN People + * Copyright (C) 2006 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/input.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/board.h> + +#include "generic.h" + +static void __init flexibity_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init flexibity_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +/* USB Host port */ +static struct at91_usbh_data __initdata flexibity_usbh_data = { + .ports = 2, +}; + +/* USB Device port */ +static struct at91_udc_data __initdata flexibity_udc_data = { + .vbus_pin = AT91_PIN_PC5, + .pullup_pin = 0, /* pull-up driven by UDC */ +}; + +/* SPI devices */ +static struct spi_board_info flexibity_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 1, + .max_speed_hz = 15 * 1000 * 1000, + .bus_num = 0, + }, +}; + +/* MCI (SD/MMC) */ +static struct at91_mmc_data __initdata flexibity_mmc_data = { + .slot_b = 0, + .wire4 = 1, + .det_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, +}; + +/* LEDs */ +static struct gpio_led flexibity_leds[] = { + { + .name = "usb1:green", + .gpio = AT91_PIN_PA12, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb1:red", + .gpio = AT91_PIN_PA13, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:green", + .gpio = AT91_PIN_PB26, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb2:red", + .gpio = AT91_PIN_PB27, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:green", + .gpio = AT91_PIN_PC8, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb3:red", + .gpio = AT91_PIN_PC6, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:green", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "usb4:red", + .gpio = AT91_PIN_PB5, + .active_low = 1, + .default_trigger = "default-on", + } +}; + +static void __init flexibity_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* USB Host */ + at91_add_device_usbh(&flexibity_usbh_data); + /* USB Device */ + at91_add_device_udc(&flexibity_udc_data); + /* SPI */ + at91_add_device_spi(flexibity_spi_devices, + ARRAY_SIZE(flexibity_spi_devices)); + /* MMC */ + at91_add_device_mmc(0, &flexibity_mmc_data); + /* LEDs */ + at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); +} + +MACHINE_START(FLEXIBITY, "Flexibity Connect") + /* Maintainer: Maxim Osipov */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = flexibity_map_io, + .init_irq = flexibity_init_irq, + .init_machine = flexibity_board_init, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c4c8865d52d..65eb0943194 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = { .start = AT91_PIN_PC11, .end = AT91_PIN_PC11, .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE, } }; static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, }; static struct platform_device dm9000_device = { @@ -168,17 +169,6 @@ static struct at91_udc_data __initdata ek_udc_data = { /* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, -// .det_pin = ... not connected -// .wp_pin = ... not connected -// .vcc_pin = ... not connected -}; - - -/* * NAND flash */ static struct mtd_partition __initdata ek_nand_partition[] = { @@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void) at91_add_device_nand(&ek_nand_data); } +/* + * SPI related devices + */ +#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* * ADS7846 Touchscreen @@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = { #endif }; +#else /* CONFIG_SPI_ATMEL_* */ +/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */ + +/* + * MCI (SD/MMC) + * det_pin, wp_pin and vcc_pin are not connected + */ +static struct at91_mmc_data __initdata ek_mmc_data = { + .wire4 = 1, +}; + +#endif /* CONFIG_SPI_ATMEL_* */ + /* * LCD Controller diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 7f7da439341..7525cee3983 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init); int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { - clk->parent = &mck; + if (!clk->parent) + clk->parent = &mck; clk->mode = pmc_periph_mode; list_add_tail(&clk->node, &clocks); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3d996b659ff..9be261beae7 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 6b6f4c64370..7781e35daec 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 40fec315c99..5e5b0a7831f 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00008000), .length = SZ_16K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index e4a3df1872a..26e8a9c7f50 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = { .virtual = SRAM_VIRT, .pfn = __phys_to_pfn(0x00010000), .length = SZ_32K, - /* MT_MEMORY_NONCACHED requires supersection alignment */ - .type = MT_DEVICE, + .type = MT_MEMORY_NONCACHED, }, }; diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h index 3b3e4721ce2..eb4936ff90a 100644 --- a/arch/arm/mach-dove/include/mach/io.h +++ b/arch/arm/mach-dove/include/mach/io.h @@ -13,8 +13,8 @@ #define IO_SPACE_LIMIT 0xffffffff -#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\ - DOVE_PCIE0_IO_VIRT_BASE)) -#define __mem_pci(a) (a) +#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ + DOVE_PCIE0_IO_VIRT_BASE)) +#define __mem_pci(a) (a) #endif diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index 8bf3cec98cf..4566bd1c866 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void) clkdev_add_table(clocks, ARRAY_SIZE(clocks)); return 0; } -arch_initcall(ep93xx_clock_init); +postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 61cd4d64b98..24498a932ba 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys); } +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + if (mask >= SZ_64M - 1) + return 0; + + return -EIO; +} + EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index f91ca6d4fbe..8138371c406 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -26,6 +26,8 @@ #define PCIBIOS_MAX_MEM 0x4BFFFFFF #endif +#define ARCH_HAS_DMA_SET_COHERENT_MASK + #define pcibios_assign_all_busses() 1 /* Register locations and bits */ diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 93fc2ec95e7..6e924b39891 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -38,7 +38,7 @@ #define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000 #define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000 +#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000 #define KIRKWOOD_PCIE1_IO_SIZE SZ_1M #define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 55e7f00836b..513ad3102d7 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp) * IORESOURCE_IO */ pp->res[0].name = "PCIe 0 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; pp->res[0].flags = IORESOURCE_IO; @@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp) * IORESOURCE_IO */ pp->res[0].name = "PCIe 1 I/O Space"; - pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE; + pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE; pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1; pp->res[0].flags = IORESOURCE_IO; diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h index 4f5b0e0ce6c..1a8a25edb1b 100644 --- a/arch/arm/mach-mmp/include/mach/system.h +++ b/arch/arm/mach-mmp/include/mach/system.h @@ -9,6 +9,8 @@ #ifndef __ASM_MACH_SYSTEM_H #define __ASM_MACH_SYSTEM_H +#include <mach/cputype.h> + static inline void arch_idle(void) { cpu_do_idle(); @@ -16,6 +18,9 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - cpu_reset(0); + if (cpu_is_pxa168()) + cpu_reset(0xffff0000); + else + cpu_reset(0); } #endif /* __ASM_MACH_SYSTEM_H */ diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index 91931dcb068..4aaadc753d3 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { * Add platform devices present on this baseboard and init * them from CPU side as far as required to use them later on */ -void __init eukrea_mbimxsd_baseboard_init(void) +void __init eukrea_mbimxsd25_baseboard_init(void) { if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, ARRAY_SIZE(eukrea_mbimxsd_pads))) diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index a5f0174290b..e064bb3d691 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void) if (!otg_mode_host) mxc_register_device(&otg_udc_device, &otg_device_pdata); -#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD - eukrea_mbimxsd_baseboard_init(); +#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD + eukrea_mbimxsd25_baseboard_init(); #endif } diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index d3af0fdf847..7a62e744a8b 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void) aad = &clk_consumer[(pdr0 >> 16) & 0xf]; if (aad->sel) - fref = fref * 2 / 3; + fref = fref * 3 / 4; return fref / aad->arm; } @@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); struct arm_ahb_div *aad; - unsigned long fref = get_rate_mpll(); + unsigned long fref = get_rate_arm(); aad = &clk_consumer[(pdr0 >> 16) & 0xf]; @@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk) return get_rate_ahb(NULL) >> 1; } -static unsigned long get_3_3_div(unsigned long in) -{ - return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1); -} - static unsigned long get_rate_uart(struct clk *clk) { unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3); unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div = get_3_3_div(pdr4 >> 10); + unsigned long div = ((pdr4 >> 10) & 0x3f) + 1; if (pdr3 & (1 << 14)) return get_rate_arm() / div; @@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk) break; } - return rate / get_3_3_div(div); + return rate / (div + 1); } static unsigned long get_rate_mshc(struct clk *clk) @@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk) else rate = get_rate_ppll(); - return rate / get_3_3_div((pdr2 >> 16) & 0x3f); + return rate / (((pdr2 >> 16) & 0x3f) + 1); } static unsigned long get_rate_otg(struct clk *clk) @@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk) else rate = get_rate_ppll(); - return rate / get_3_3_div((pdr4 >> 22) & 0x3f); + return rate / (((pdr4 >> 22) & 0x3f) + 1); } static unsigned long get_rate_ipg_per(struct clk *clk) { unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0); unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4); - unsigned long div1, div2; + unsigned long div; if (pdr0 & (1 << 26)) { - div1 = (pdr4 >> 19) & 0x7; - div2 = (pdr4 >> 16) & 0x7; - return get_rate_arm() / ((div1 + 1) * (div2 + 1)); + div = (pdr4 >> 16) & 0x3f; + return get_rate_arm() / (div + 1); } else { - div1 = (pdr0 >> 12) & 0x7; - return get_rate_ahb(NULL) / div1; + div = (pdr0 >> 12) & 0x7; + return get_rate_ahb(NULL) / (div + 1); } } +static unsigned long get_rate_hsp(struct clk *clk) +{ + unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03; + unsigned long fref = get_rate_mpll(); + + if (fref > 400 * 1000 * 1000) { + switch (hsp_podf) { + case 0: + return fref >> 2; + case 1: + return fref >> 3; + case 2: + return fref / 3; + } + } else { + switch (hsp_podf) { + case 0: + case 2: + return fref / 3; + case 1: + return fref / 6; + } + } + + return 0; +} + static int clk_cgr_enable(struct clk *clk) { u32 reg; @@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL); DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL); DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL); -DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL); +DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL); DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL); DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL); DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL); @@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = { int __init mx35_clocks_init() { - unsigned int ll = 0; + unsigned int cgr2 = 3 << 26, cgr3 = 0; #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC) - ll = (3 << 16); + cgr2 |= 3 << 16; #endif clkdev_add_table(lookups, ARRAY_SIZE(lookups)); @@ -499,8 +520,20 @@ int __init mx35_clocks_init() __raw_writel((3 << 18), CCM_BASE + CCM_CGR0); __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16), CCM_BASE + CCM_CGR1); - __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2); - __raw_writel(0, CCM_BASE + CCM_CGR3); + + /* + * Check if we came up in internal boot mode. If yes, we need some + * extra clocks turned on, otherwise the MX35 boot ROM code will + * hang after a watchdog reset. + */ + if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) { + /* Additionally turn on UART1, SCC, and IIM clocks */ + cgr2 |= 3 << 16 | 3 << 4; + cgr3 |= 3 << 2; + } + + __raw_writel(cgr2, CCM_BASE + CCM_CGR2); + __raw_writel(cgr3, CCM_BASE + CCM_CGR3); mxc_timer_init(&gpt_clk, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index 1dc5004df86..f8f15e3ac7a 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { * Add platform devices present on this baseboard and init * them from CPU side as far as required to use them later on */ -void __init eukrea_mbimxsd_baseboard_init(void) +void __init eukrea_mbimxsd35_baseboard_init(void) { if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, ARRAY_SIZE(eukrea_mbimxsd_pads))) diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 9770a6a973b..2a4f8b781ba 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -201,8 +201,8 @@ static void __init mxc_board_init(void) if (!otg_mode_host) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); -#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD - eukrea_mbimxsd_baseboard_init(); +#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD + eukrea_mbimxsd35_baseboard_init(); #endif } diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 6af69def357..57c10a9926c 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk) { u32 reg; reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift); + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); __raw_writel(reg, clk->enable_reg); } diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 268a9bc6be8..58093d9e07b 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, freqs.cpu = policy->cpu; if (freq_debug) - pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, " - "(SDRAM %d Mhz)\n", + pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", freqs.new / 1000, (pxa_freq_settings[idx].div2) ? (new_freq_mem / 2000) : (new_freq_mem / 1000)); @@ -398,7 +397,7 @@ static int pxa_set_target(struct cpufreq_policy *policy, return 0; } -static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) +static int pxa_cpufreq_init(struct cpufreq_policy *policy) { int i; unsigned int freq; diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 27fa329d9a8..0a0d0fe9922 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, return 0; } -static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) +static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) { int ret = -EINVAL; diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 7f64d24cd56..814f1458a06 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -264,23 +264,35 @@ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x * == 0x3 for pxa300/pxa310/pxa320 */ +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) #define __cpu_is_pxa2xx(id) \ ({ \ unsigned int _id = (id) >> 13 & 0x7; \ _id <= 0x2; \ }) +#else +#define __cpu_is_pxa2xx(id) (0) +#endif +#ifdef CONFIG_PXA3xx #define __cpu_is_pxa3xx(id) \ ({ \ unsigned int _id = (id) >> 13 & 0x7; \ _id == 0x3; \ }) +#else +#define __cpu_is_pxa3xx(id) (0) +#endif +#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935) #define __cpu_is_pxa93x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ _id == 0x683 || _id == 0x693; \ }) +#else +#define __cpu_is_pxa93x(id) (0) +#endif #define cpu_is_pxa2xx() \ ({ \ @@ -309,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void); #define PCIBIOS_MIN_IO 0 #define PCIBIOS_MIN_MEM 0 #define pcibios_assign_all_busses() 1 +#define ARCH_HAS_DMA_SET_COHERENT_MASK #endif - #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h index 262691fb97d..fdca3be47d9 100644 --- a/arch/arm/mach-pxa/include/mach/io.h +++ b/arch/arm/mach-pxa/include/mach/io.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H +#include <mach/hardware.h> + #define IO_SPACE_LIMIT 0xffffffff /* diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index 7139e0dc26d..4e1287070d2 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -71,10 +71,10 @@ #define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) #define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) #define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) #define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) #define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) +#define GPIO51_CI_HSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) +#define GPIO52_CI_VSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) /* KEYPAD */ #define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 77ad6d34ab5..405b92a2979 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = { }, }; +static struct i2c_pxa_platform_data palm27x_i2c_power_info = { + .use_pio = 1, +}; + void __init palm27x_pmic_init(void) { i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info)); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&palm27x_i2c_power_info); } #endif diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index c9b747cedea..37d6173bbb6 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {} #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static struct pxamci_platform_data vpac270_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .gpio_power = -1, .gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N, .gpio_card_ro = GPIO52_VPAC270_SD_READONLY, .detect_delay_ms = 200, diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 2fa38df2841..07c08151dfe 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -259,6 +259,7 @@ struct mmci_platform_data realview_mmc0_plat_data = { .status = realview_mmc_status, .gpio_wp = 17, .gpio_cd = 16, + .cd_invert = true, }; struct mmci_platform_data realview_mmc1_plat_data = { @@ -266,6 +267,7 @@ struct mmci_platform_data realview_mmc1_plat_data = { .status = realview_mmc_status, .gpio_wp = 19, .gpio_cd = 18, + .cd_invert = true, }; /* diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index dd53892d44a..d3cd265cb05 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index a492b982aa0..405e6212891 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -18,10 +18,11 @@ #include <mach/map.h> #include <mach/gpio-bank-c.h> #include <mach/spi-clocks.h> +#include <mach/irqs.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> -#include <plat/irqs.h> +#include <plat/devs.h> static char *spi_src_clks[] = { [S3C64XX_SPI_SRCCLK_PCLK] = "pclk", diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 5c07d013b23..e130379ba0e 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -30,73 +30,73 @@ #include <plat/devs.h> #include <plat/regs-serial.h> -#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK -#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB -#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = { [0] = { - .hwport = 0, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, [1] = { - .hwport = 1, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, [2] = { - .hwport = 2, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, [3] = { - .hwport = 3, - .flags = 0, - .ucon = UCON, - .ulcon = ULCON, - .ufcon = UFCON, + .hwport = 3, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, }, }; /* DM9000AEP 10/100 ethernet controller */ static struct resource real6410_dm9k_resource[] = { - [0] = { - .start = S3C64XX_PA_XM0CSN1, - .end = S3C64XX_PA_XM0CSN1 + 1, - .flags = IORESOURCE_MEM - }, - [1] = { - .start = S3C64XX_PA_XM0CSN1 + 4, - .end = S3C64XX_PA_XM0CSN1 + 5, - .flags = IORESOURCE_MEM - }, - [2] = { - .start = S3C_EINT(7), - .end = S3C_EINT(7), - .flags = IORESOURCE_IRQ, - } + [0] = { + .start = S3C64XX_PA_XM0CSN1, + .end = S3C64XX_PA_XM0CSN1 + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C64XX_PA_XM0CSN1 + 4, + .end = S3C64XX_PA_XM0CSN1 + 5, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = S3C_EINT(7), + .end = S3C_EINT(7), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL + } }; static struct dm9000_plat_data real6410_dm9k_pdata = { - .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), }; static struct platform_device real6410_device_eth = { - .name = "dm9000", - .id = -1, - .num_resources = ARRAY_SIZE(real6410_dm9k_resource), - .resource = real6410_dm9k_resource, - .dev = { - .platform_data = &real6410_dm9k_pdata, - }, + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(real6410_dm9k_resource), + .resource = real6410_dm9k_resource, + .dev = { + .platform_data = &real6410_dm9k_pdata, + }, }; static struct platform_device *real6410_devices[] __initdata = { @@ -129,12 +129,12 @@ static void __init real6410_machine_init(void) /* set timing for nCS1 suitable for ethernet chip */ __raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) | - (6 << S3C64XX_SROM_BCX__TACP__SHIFT) | - (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) | - (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) | - (13 << S3C64XX_SROM_BCX__TACC__SHIFT) | - (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | - (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); + (6 << S3C64XX_SROM_BCX__TACP__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) | + (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) | + (13 << S3C64XX_SROM_BCX__TACC__SHIFT) | + (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) | + (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1); platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices)); } diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 3a9639bc3d9..cb1ebeb0876 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -136,7 +136,7 @@ static struct platform_device smartq_usb_otg_vbus_dev = { .dev.platform_data = &smartq_usb_otg_vbus_pdata, }; -static int __init smartq_bl_init(struct device *dev) +static int smartq_bl_init(struct device *dev) { s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index a4d59b076e3..235e43928cb 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq5_leds[] __initdata = { +static struct gpio_led smartq5_leds[] = { { .name = "smartq5:green", .active_low = 1, diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index e50a7d78173..78a58c351f0 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -32,7 +32,7 @@ #include "mach-smartq.h" -static struct gpio_led smartq7_leds[] __initdata = { +static struct gpio_led smartq7_leds[] = { { .name = "smartq7:red", .active_low = 1, diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index af91fefef2c..cfecd70657c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -281,6 +281,24 @@ static struct clk init_clocks_disable[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1<<29), }, { + .name = "fimc", + .id = 0, + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 24), + }, { + .name = "fimc", + .id = 1, + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "fimc", + .id = 2, + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 26), + }, { .name = "otg", .id = -1, .parent = &clk_hclk_psys.clk, @@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = { .id = 1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, - .ctrlbit = (1<<8), + .ctrlbit = (1 << 10), }, { .name = "i2c", .id = 2, diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index b9f4d677cf5..77f456c91ad 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = { { .virtual = (unsigned long)S5P_VA_SYSTIMER, .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER), - .length = SZ_1M, + .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)VA_VIC2, diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h index 990f3ba88a1..b7ec252384f 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-s5pv310/include/mach/smp.h @@ -7,17 +7,10 @@ #define ASM_ARCH_SMP_H __FILE__ #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> extern void __iomem *gic_cpu_base_addr; -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x03; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 5e16b4c6922..ae416fe7daf 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,7 +3,7 @@ # # Common objects -obj-y := timer.o console.o clock.o +obj-y := timer.o console.o clock.o pm_runtime.o # CPU objects obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 23d472f9525..95935c83c30 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -25,6 +25,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> #include <linux/mmc/host.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -39,6 +40,7 @@ #include <linux/sh_clk.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> @@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_ocr_mask = MMC_VDD_165_195, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, }; static struct resource sdhi1_resources[] = { @@ -558,7 +561,7 @@ static struct resource fsi_resources[] = { static struct platform_device fsi_device = { .name = "sh_fsi2", - .id = 0, + .id = -1, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, .dev = { @@ -650,7 +653,44 @@ static struct platform_device hdmi_device = { }, }; +static struct gpio_led ap4evb_leds[] = { + { + .name = "led4", + .gpio = GPIO_PORT185, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led2", + .gpio = GPIO_PORT186, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led3", + .gpio = GPIO_PORT187, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "led1", + .gpio = GPIO_PORT188, + .default_state = LEDS_GPIO_DEFSTATE_ON, + } +}; + +static struct gpio_led_platform_data ap4evb_leds_pdata = { + .num_leds = ARRAY_SIZE(ap4evb_leds), + .leds = ap4evb_leds, +}; + +static struct platform_device leds_device = { + .name = "leds-gpio", + .id = 0, + .dev = { + .platform_data = &ap4evb_leds_pdata, + }, +}; + static struct platform_device *ap4evb_devices[] __initdata = { + &leds_device, &nor_flash_device, &smc911x_device, &sdhi0_device, @@ -840,20 +880,6 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_CS5A, NULL); gpio_request(GPIO_FN_IRQ6_39, NULL); - /* enable LED 1 - 4 */ - gpio_request(GPIO_PORT185, NULL); - gpio_request(GPIO_PORT186, NULL); - gpio_request(GPIO_PORT187, NULL); - gpio_request(GPIO_PORT188, NULL); - gpio_direction_output(GPIO_PORT185, 1); - gpio_direction_output(GPIO_PORT186, 1); - gpio_direction_output(GPIO_PORT187, 1); - gpio_direction_output(GPIO_PORT188, 1); - gpio_export(GPIO_PORT185, 0); - gpio_export(GPIO_PORT186, 0); - gpio_export(GPIO_PORT187, 0); - gpio_export(GPIO_PORT188, 0); - /* enable Debug switch (S6) */ gpio_request(GPIO_PORT32, NULL); gpio_request(GPIO_PORT33, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index fb4e9b1d788..759468992ad 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = { struct clk pllc2_clk = { .ops = &pllc2_clk_ops, - .flags = CLK_ENABLE_ON_INIT, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, .parent_table = pllc2_parent, @@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { enum { MSTP001, MSTP131, MSTP130, - MSTP129, MSTP128, + MSTP129, MSTP128, MSTP127, MSTP126, MSTP118, MSTP117, MSTP116, MSTP106, MSTP101, MSTP100, MSTP223, @@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */ + [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */ + [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */ [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ @@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ - [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */ + [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ [MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */ @@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ + CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ + CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index b7c705a213a..6b7c7c42bc8 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -1,8 +1,10 @@ /* - * SH-Mobile Timer + * SH-Mobile Clock Framework * * Copyright (C) 2010 Magnus Damm * + * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c new file mode 100644 index 00000000000..94912d3944d --- /dev/null +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -0,0 +1,169 @@ +/* + * arch/arm/mach-shmobile/pm_runtime.c + * + * Runtime PM support code for SuperH Mobile ARM + * + * Copyright (C) 2009-2010 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/sh_clk.h> +#include <linux/bitmap.h> + +#ifdef CONFIG_PM_RUNTIME +#define BIT_ONCE 0 +#define BIT_ACTIVE 1 +#define BIT_CLK_ENABLED 2 + +struct pm_runtime_data { + unsigned long flags; + struct clk *clk; +}; + +static void __devres_release(struct device *dev, void *res) +{ + struct pm_runtime_data *prd = res; + + dev_dbg(dev, "__devres_release()\n"); + + if (test_bit(BIT_CLK_ENABLED, &prd->flags)) + clk_disable(prd->clk); + + if (test_bit(BIT_ACTIVE, &prd->flags)) + clk_put(prd->clk); +} + +static struct pm_runtime_data *__to_prd(struct device *dev) +{ + return devres_find(dev, __devres_release, NULL, NULL); +} + +static void platform_pm_runtime_init(struct device *dev, + struct pm_runtime_data *prd) +{ + if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) { + prd->clk = clk_get(dev, NULL); + if (!IS_ERR(prd->clk)) { + set_bit(BIT_ACTIVE, &prd->flags); + dev_info(dev, "clocks managed by runtime pm\n"); + } + } +} + +static void platform_pm_runtime_bug(struct device *dev, + struct pm_runtime_data *prd) +{ + if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) + dev_err(dev, "runtime pm suspend before resume\n"); +} + +int platform_pm_runtime_suspend(struct device *dev) +{ + struct pm_runtime_data *prd = __to_prd(dev); + + dev_dbg(dev, "platform_pm_runtime_suspend()\n"); + + platform_pm_runtime_bug(dev, prd); + + if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { + clk_disable(prd->clk); + clear_bit(BIT_CLK_ENABLED, &prd->flags); + } + + return 0; +} + +int platform_pm_runtime_resume(struct device *dev) +{ + struct pm_runtime_data *prd = __to_prd(dev); + + dev_dbg(dev, "platform_pm_runtime_resume()\n"); + + platform_pm_runtime_init(dev, prd); + + if (prd && test_bit(BIT_ACTIVE, &prd->flags)) { + clk_enable(prd->clk); + set_bit(BIT_CLK_ENABLED, &prd->flags); + } + + return 0; +} + +int platform_pm_runtime_idle(struct device *dev) +{ + /* suspend synchronously to disable clocks immediately */ + return pm_runtime_suspend(dev); +} + +static int platform_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct pm_runtime_data *prd; + + dev_dbg(dev, "platform_bus_notify() %ld !\n", action); + + if (action == BUS_NOTIFY_BIND_DRIVER) { + prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL); + if (prd) + devres_add(dev, prd); + else + dev_err(dev, "unable to alloc memory for runtime pm\n"); + } + + return 0; +} + +#else /* CONFIG_PM_RUNTIME */ + +static int platform_bus_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct clk *clk; + + dev_dbg(dev, "platform_bus_notify() %ld !\n", action); + + switch (action) { + case BUS_NOTIFY_BIND_DRIVER: + clk = clk_get(dev, NULL); + if (!IS_ERR(clk)) { + clk_enable(clk); + clk_put(clk); + dev_info(dev, "runtime pm disabled, clock forced on\n"); + } + break; + case BUS_NOTIFY_UNBOUND_DRIVER: + clk = clk_get(dev, NULL); + if (!IS_ERR(clk)) { + clk_disable(clk); + clk_put(clk); + dev_info(dev, "runtime pm disabled, clock forced off\n"); + } + break; + } + + return 0; +} + +#endif /* CONFIG_PM_RUNTIME */ + +static struct notifier_block platform_bus_notifier = { + .notifier_call = platform_bus_notify +}; + +static int __init sh_pm_runtime_init(void) +{ + bus_register_notifier(&platform_bus_type, &platform_bus_notifier); + return 0; +} +core_initcall(sh_pm_runtime_init); diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h index 8b42dab79a7..e4a34a35a54 100644 --- a/arch/arm/mach-tegra/include/mach/smp.h +++ b/arch/arm/mach-tegra/include/mach/smp.h @@ -1,16 +1,8 @@ #ifndef ASMARM_ARCH_SMP_H #define ASMARM_ARCH_SMP_H - #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h index 7b1fc984abb..d5a71abcbae 100644 --- a/arch/arm/mach-u300/include/mach/gpio.h +++ b/arch/arm/mach-u300/include/mach/gpio.h @@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value); extern int gpio_get_value(unsigned gpio); extern void gpio_set_value(unsigned gpio, int value); +#define gpio_get_value_cansleep gpio_get_value +#define gpio_set_value_cansleep gpio_set_value + /* wrappers to sleep-enable the previous two functions */ static inline unsigned gpio_to_irq(unsigned gpio) { diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 6625e5bbf4d..2dd44a0b461 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -21,9 +21,7 @@ config MACH_U8500_MOP bool "U8500 Development platform" select UX500_SOC_DB8500 help - Include support for mop500 development platform - based on U8500 architecture. The platform is based - on early drop silicon version of 8500. + Include support for the mop500 development platform. config MACH_U5500 bool "U5500 Development platform" @@ -39,4 +37,18 @@ config UX500_DEBUG_UART Choose the UART on which kernel low-level debug messages should be output. +config U5500_MODEM_IRQ + bool "Modem IRQ support" + depends on MACH_U5500 + default y + help + Add support for handling IRQ:s from modem side + +config U5500_MBOX + bool "Mailbox support" + depends on MACH_U5500 && U5500_MODEM_IRQ + default y + help + Add support for U5500 mailbox communication with modem side + endif diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 4556aea9c3c..9e27a84433c 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -4,8 +4,12 @@ obj-y := clock.o cpu.o devices.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o +obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o +obj-$(CONFIG_U5500_MBOX) += mbox.o diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c new file mode 100644 index 00000000000..1187f1fc2e5 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + * MOP500 board specific initialization for regulators + */ +#include <linux/kernel.h> +#include <linux/regulator/machine.h> + +/* supplies to the display/camera */ +static struct regulator_init_data ab8500_vaux1_regulator = { + .constraints = { + .name = "V-DISPLAY", + .min_uV = 2500000, + .max_uV = 2900000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supplies to the on-board eMMC */ +static struct regulator_init_data ab8500_vaux2_regulator = { + .constraints = { + .name = "V-eMMC1", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for VAUX3, supplies to SDcard slots */ +static struct regulator_init_data ab8500_vaux3_regulator = { + .constraints = { + .name = "V-MMC-SD", + .min_uV = 1100000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE| + REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for tvout, gpadc, TVOUT LDO */ +static struct regulator_init_data ab8500_vtvout_init = { + .constraints = { + .name = "V-TVOUT", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for ab8500-vaudio, VAUDIO LDO */ +static struct regulator_init_data ab8500_vaudio_init = { + .constraints = { + .name = "V-AUD", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-anamic1 VAMic1-LDO */ +static struct regulator_init_data ab8500_vamic1_init = { + .constraints = { + .name = "V-AMIC1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ +static struct regulator_init_data ab8500_vamic2_init = { + .constraints = { + .name = "V-AMIC2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-dmic, VDMIC LDO */ +static struct regulator_init_data ab8500_vdmic_init = { + .constraints = { + .name = "V-DMIC", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for v-intcore12, VINTCORE12 LDO */ +static struct regulator_init_data ab8500_vintcore_init = { + .constraints = { + .name = "V-INTCORE", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +/* supply for U8500 CSI/DSI, VANA LDO */ +static struct regulator_init_data ab8500_vana_init = { + .constraints = { + .name = "V-CSI/DSI", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c new file mode 100644 index 00000000000..bac995665b5 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -0,0 +1,91 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/amba/bus.h> +#include <linux/amba/mmci.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> + +#include <plat/pincfg.h> +#include <mach/devices.h> +#include <mach/hardware.h> + +#include "pins-db8500.h" +#include "board-mop500.h" + +static pin_cfg_t mop500_sdi_pins[] = { + /* SDI4 (on-board eMMC) */ + GPIO197_MC4_DAT3, + GPIO198_MC4_DAT2, + GPIO199_MC4_DAT1, + GPIO200_MC4_DAT0, + GPIO201_MC4_CMD, + GPIO202_MC4_FBCLK, + GPIO203_MC4_CLK, + GPIO204_MC4_DAT7, + GPIO205_MC4_DAT6, + GPIO206_MC4_DAT5, + GPIO207_MC4_DAT4, +}; + +static pin_cfg_t mop500_sdi2_pins[] = { + /* SDI2 (POP eMMC) */ + GPIO128_MC2_CLK, + GPIO129_MC2_CMD, + GPIO130_MC2_FBCLK, + GPIO131_MC2_DAT0, + GPIO132_MC2_DAT1, + GPIO133_MC2_DAT2, + GPIO134_MC2_DAT3, + GPIO135_MC2_DAT4, + GPIO136_MC2_DAT5, + GPIO137_MC2_DAT6, + GPIO138_MC2_DAT7, +}; + +/* + * SDI 2 (POP eMMC, not on DB8500ed) + */ + +static struct mmci_platform_data mop500_sdi2_data = { + .ocr_mask = MMC_VDD_165_195, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +/* + * SDI 4 (on-board eMMC) + */ + +static struct mmci_platform_data mop500_sdi4_data = { + .ocr_mask = MMC_VDD_29_30, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +void mop500_sdi_init(void) +{ + nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins)); + + u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data; + u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data; + + if (!cpu_is_u8500ed()) { + nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins)); + amba_device_register(&u8500_sdi2_device, &iomem_resource); + } + + /* On-board eMMC */ + amba_device_register(&u8500_sdi4_device, &iomem_resource); +} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0e8fd135a57..642b8e60d11 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -28,8 +28,10 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/irqs.h> #include "pins-db8500.h" +#include "board-mop500.h" static pin_cfg_t mop500_pins[] = { /* SSP0 */ @@ -75,9 +77,27 @@ static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, }; -static struct spi_board_info u8500_spi_devices[] = { +static struct resource ab8500_resources[] = { + [0] = { + .start = IRQ_AB8500, + .end = IRQ_AB8500, + .flags = IORESOURCE_IRQ + } +}; + +struct platform_device ab8500_device = { + .name = "ab8500-i2c", + .id = 0, + .dev = { + .platform_data = &ab8500_platdata, + }, + .num_resources = 1, + .resource = ab8500_resources, +}; + +static struct spi_board_info ab8500_spi_devices[] = { { - .modalias = "ab8500", + .modalias = "ab8500-spi", .controller_data = &ab4500_chip_info, .platform_data = &ab8500_platdata, .max_speed_hz = 12000000, @@ -163,8 +183,14 @@ static void __init u8500_init_machine(void) platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); - spi_register_board_info(u8500_spi_devices, - ARRAY_SIZE(u8500_spi_devices)); + mop500_sdi_init(); + + /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */ + if (cpu_is_u8500ed() || cpu_is_u8500v10()) + spi_register_board_info(ab8500_spi_devices, + ARRAY_SIZE(ab8500_spi_devices)); + else /* If HW is v.1.1 or later use I2C to access AB8500 */ + platform_device_register(&ab8500_device); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h new file mode 100644 index 00000000000..2d240322fa6 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __BOARD_MOP500_H +#define __BOARD_MOP500_H + +extern void mop500_sdi_init(void); + +#endif diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index e9278f6d67a..2f87075e9d6 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -14,6 +14,7 @@ #include <mach/hardware.h> #include <mach/devices.h> #include <mach/setup.h> +#include <mach/irqs.h> static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), @@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), }; +static struct resource mbox0_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX0_PEER_START, + .end = U5500_MBOX0_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX0_LOCAL_START, + .end = U5500_MBOX0_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR0_VIRT_IRQ, + .end = MBOX_PAIR0_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox1_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX1_PEER_START, + .end = U5500_MBOX1_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX1_LOCAL_START, + .end = U5500_MBOX1_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR1_VIRT_IRQ, + .end = MBOX_PAIR1_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource mbox2_resources[] = { + { + .name = "mbox_peer", + .start = U5500_MBOX2_PEER_START, + .end = U5500_MBOX2_PEER_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_local", + .start = U5500_MBOX2_LOCAL_START, + .end = U5500_MBOX2_LOCAL_END, + .flags = IORESOURCE_MEM, + }, + { + .name = "mbox_irq", + .start = MBOX_PAIR2_VIRT_IRQ, + .end = MBOX_PAIR2_VIRT_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device mbox0_device = { + .id = 0, + .name = "mbox", + .resource = mbox0_resources, + .num_resources = ARRAY_SIZE(mbox0_resources), +}; + +static struct platform_device mbox1_device = { + .id = 1, + .name = "mbox", + .resource = mbox1_resources, + .num_resources = ARRAY_SIZE(mbox1_resources), +}; + +static struct platform_device mbox2_device = { + .id = 2, + .name = "mbox", + .resource = mbox2_resources, + .num_resources = ARRAY_SIZE(mbox2_resources), +}; + static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[0], &u5500_gpio_devs[1], @@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = { &u5500_gpio_devs[5], &u5500_gpio_devs[6], &u5500_gpio_devs[7], + &mbox0_device, + &mbox1_device, + &mbox2_device, }; void __init u5500_map_io(void) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index f21c444edd9..4acab7544b3 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = { /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), + __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M), }; static struct map_desc u8500ed_io_desc[] __initdata = { @@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), }; +/* + * Functions to differentiate between later ASICs + * We look into the end of the ROM to locate the hardcoded ASIC ID. + * This is only needed to differentiate between minor revisions and + * process variants of an ASIC, the major revisions are encoded in + * the cpuid. + */ +#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOT_ROM_BASE + 0x1FFF4) +#define U8500_ASIC_ID_LOC_V2 (U8500_BOOT_ROM_BASE + 0x1DBF4) +#define U8500_ASIC_REV_ED 0x01 +#define U8500_ASIC_REV_V10 0xA0 +#define U8500_ASIC_REV_V11 0xA1 +#define U8500_ASIC_REV_V20 0xB0 + +/** + * struct db8500_asic_id - fields of the ASIC ID + * @process: the manufacturing process, 0x40 is 40 nm + * 0x00 is "standard" + * @partnumber: hithereto 0x8500 for DB8500 + * @revision: version code in the series + * This field definion is not formally defined but makes + * sense. + */ +struct db8500_asic_id { + u8 process; + u16 partnumber; + u8 revision; +}; + +/* This isn't going to change at runtime */ +static struct db8500_asic_id db8500_id; + +static void __init get_db8500_asic_id(void) +{ + u32 asicid; + + if (cpu_is_u8500v1() || cpu_is_u8500ed()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1)); + else if (cpu_is_u8500v2()) + asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2)); + else + BUG(); + + db8500_id.process = (asicid >> 24); + db8500_id.partnumber = (asicid >> 16) & 0xFFFFU; + db8500_id.revision = asicid & 0xFFU; +} + +bool cpu_is_u8500v10(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V10); +} + +bool cpu_is_u8500v11(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V11); +} + +bool cpu_is_u8500v20(void) +{ + return (db8500_id.revision == U8500_ASIC_REV_V20); +} + void __init u8500_map_io(void) { ux500_map_io(); @@ -63,6 +128,9 @@ void __init u8500_map_io(void) iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); else iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); + + /* Read out the ASIC ID as early as we can */ + get_db8500_asic_id(); } /* @@ -70,6 +138,20 @@ void __init u8500_map_io(void) */ void __init u8500_init_devices(void) { + /* Display some ASIC boilerplate */ + pr_info("DB8500: process: %02x, revision ID: 0x%02x\n", + db8500_id.process, db8500_id.revision); + if (cpu_is_u8500ed()) + pr_info("DB8500: Early Drop (ED)\n"); + else if (cpu_is_u8500v10()) + pr_info("DB8500: version 1.0\n"); + else if (cpu_is_u8500v11()) + pr_info("DB8500: version 1.1\n"); + else if (cpu_is_u8500v20()) + pr_info("DB8500: version 2.0\n"); + else + pr_warning("ASIC: UNKNOWN SILICON VERSION!\n"); + ux500_init_devices(); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 9280d256111..40032fecbc1 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -110,6 +110,82 @@ struct platform_device u8500_i2c4_device = { .num_resources = ARRAY_SIZE(u8500_i2c4_resources), }; +/* + * SD/MMC + */ + +struct amba_device u8500_sdi0_device = { + .dev = { + .init_name = "sdi0", + }, + .res = { + .start = U8500_SDI0_BASE, + .end = U8500_SDI0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC0, NO_IRQ}, +}; + +struct amba_device u8500_sdi1_device = { + .dev = { + .init_name = "sdi1", + }, + .res = { + .start = U8500_SDI1_BASE, + .end = U8500_SDI1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC1, NO_IRQ}, +}; + +struct amba_device u8500_sdi2_device = { + .dev = { + .init_name = "sdi2", + }, + .res = { + .start = U8500_SDI2_BASE, + .end = U8500_SDI2_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC2, NO_IRQ}, +}; + +struct amba_device u8500_sdi3_device = { + .dev = { + .init_name = "sdi3", + }, + .res = { + .start = U8500_SDI3_BASE, + .end = U8500_SDI3_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC3, NO_IRQ}, +}; + +struct amba_device u8500_sdi4_device = { + .dev = { + .init_name = "sdi4", + }, + .res = { + .start = U8500_SDI4_BASE, + .end = U8500_SDI4_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC4, NO_IRQ}, +}; + +struct amba_device u8500_sdi5_device = { + .dev = { + .init_name = "sdi5", + }, + .res = { + .start = U8500_SDI5_BASE, + .end = U8500_SDI5_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DB8500_SDMMC5, NO_IRQ}, +}; + static struct resource dma40_resources[] = { [0] = { .start = U8500_DMA_BASE, @@ -170,23 +246,23 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = { * Mapping between destination event lines and physical device address. * The event line is tied to a device and therefor the address is constant. */ -static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV]; /* Mapping between source event lines and physical device address */ -static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; +static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV]; /* Reserved event lines for memcpy only */ static int dma40_memcpy_event[] = { - STEDMA40_MEMCPY_TX_0, - STEDMA40_MEMCPY_TX_1, - STEDMA40_MEMCPY_TX_2, - STEDMA40_MEMCPY_TX_3, - STEDMA40_MEMCPY_TX_4, - STEDMA40_MEMCPY_TX_5, + DB8500_DMA_MEMCPY_TX_0, + DB8500_DMA_MEMCPY_TX_1, + DB8500_DMA_MEMCPY_TX_2, + DB8500_DMA_MEMCPY_TX_3, + DB8500_DMA_MEMCPY_TX_4, + DB8500_DMA_MEMCPY_TX_5, }; static struct stedma40_platform_data dma40_plat_data = { - .dev_len = STEDMA40_NR_DEV, + .dev_len = DB8500_DMA_NR_DEV, .dev_rx = dma40_rx_map, .dev_tx = dma40_tx_map, .memcpy = dma40_memcpy_event, diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c new file mode 100644 index 00000000000..b782a03024b --- /dev/null +++ b/arch/arm/mach-ux500/hotplug.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Based on ARM realview platform + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/smp.h> +#include <linux/completion.h> + +#include <asm/cacheflush.h> + +extern volatile int pen_release; + +static DECLARE_COMPLETION(cpu_killed); + +static inline void platform_do_lowpower(unsigned int cpu) +{ + flush_cache_all(); + + /* we put the platform to just WFI */ + for (;;) { + __asm__ __volatile__("dsb\n\t" "wfi\n\t" + : : : "memory"); + if (pen_release == cpu) { + /* + * OK, proper wakeup, we're done + */ + break; + } + } +} + +int platform_cpu_kill(unsigned int cpu) +{ + return wait_for_completion_timeout(&cpu_killed, 5000); +} + +/* + * platform-specific code to shutdown a CPU + * + * Called with IRQs disabled + */ +void platform_cpu_die(unsigned int cpu) +{ +#ifdef DEBUG + unsigned int this_cpu = hard_smp_processor_id(); + + if (cpu != this_cpu) { + printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n", + this_cpu, cpu); + BUG(); + } +#endif + + printk(KERN_NOTICE "CPU%u: shutdown\n", cpu); + complete(&cpu_killed); + + /* directly enter low power state, skipping secure registers */ + platform_do_lowpower(cpu); +} + +int platform_cpu_disable(unsigned int cpu) +{ + /* + * we don't allow CPU 0 to be shutdown (it is still too special + * e.g. clock tick interrupts) + */ + return cpu == 0 ? -EPERM : 0; +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 545c80fc802..3eafc0e24ba 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -100,4 +100,18 @@ #define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80) #define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100) +#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000) +#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40) +#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F) +#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60) +#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F) +#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80) +#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F) +#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0) +#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF) +#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00) +#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F) +#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) +#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f000218210c..f07d0986409 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -30,8 +30,6 @@ #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 -/* ASIC ID is at 0xff4 offset within this region */ -#define U8500_ASIC_ID_BASE 0x9001F000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index c2b2f257494..33a120c2e82 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -27,6 +27,13 @@ extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; +extern struct amba_device u8500_sdi0_device; +extern struct amba_device u8500_sdi1_device; +extern struct amba_device u8500_sdi2_device; +extern struct amba_device u8500_sdi3_device; +extern struct amba_device u8500_sdi4_device; +extern struct amba_device u8500_sdi5_device; + void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 8656379a830..32e883a8f2a 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void) #endif } +#define CPUID_DB8500ED 0x410fc090 +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 + static inline bool cpu_is_u8500ed(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 0; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED); } static inline bool cpu_is_u8500v1(void) { - return cpu_is_u8500() && (read_cpuid_id() & 15) == 1; + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1); +} + +static inline bool cpu_is_u8500v2(void) +{ + return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2); } +#ifdef CONFIG_UX500_SOC_DB8500 +bool cpu_is_u8500v10(void); +bool cpu_is_u8500v11(void); +bool cpu_is_u8500v20(void); +#else +static inline bool cpu_is_u8500v10(void) { return false; } +static inline bool cpu_is_u8500v11(void) { return false; } +static inline bool cpu_is_u8500v20(void) { return false; } +#endif + static inline bool cpu_is_u5500(void) { #ifdef CONFIG_UX500_SOC_DB5500 diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index 6fbfe5e2065..bfa123dbec3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -61,6 +61,7 @@ #define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) #define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) #define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65) #define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) #define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) #define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 10385bdc2b7..693aa57de88 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -40,7 +40,8 @@ #define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) #define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) #define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB4500 (IRQ_SHPI_START + 40) +#define IRQ_AB8500 (IRQ_SHPI_START + 40) +#define IRQ_PRCMU (IRQ_SHPI_START + 47) #define IRQ_DISP (IRQ_SHPI_START + 48) #define IRQ_SiPI3 (IRQ_SHPI_START + 49) #define IRQ_I2C4 (IRQ_SHPI_START + 51) @@ -83,6 +84,19 @@ #include <mach/irqs-board-mop500.h> #endif -#define NR_IRQS IRQ_BOARD_END +/* + * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +#define NR_IRQS IRQ_MODEM_EVENTS_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h new file mode 100644 index 00000000000..7f9da4d2fbd --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/mbox.h @@ -0,0 +1,88 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __INC_STE_MBOX_H +#define __INC_STE_MBOX_H + +#define MBOX_BUF_SIZE 16 +#define MBOX_NAME_SIZE 8 + +/** + * mbox_recv_cb_t - Definition of the mailbox callback. + * @mbox_msg: The mailbox message. + * @priv: The clients private data as specified in the call to mbox_setup. + * + * This function will be called upon reception of new mailbox messages. + */ +typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv); + +/** + * struct mbox - Mailbox instance struct + * @list: Linked list head. + * @pdev: Pointer to device struct. + * @cb: Callback function. Will be called + * when new data is received. + * @client_data: Clients private data. Will be sent back + * in the callback function. + * @virtbase_peer: Virtual address for outgoing mailbox. + * @virtbase_local: Virtual address for incoming mailbox. + * @buffer: Then internal queue for outgoing messages. + * @name: Name of this mailbox. + * @buffer_available: Completion variable to achieve "blocking send". + * This variable will be signaled when there is + * internal buffer space available. + * @client_blocked: To keep track if any client is currently + * blocked. + * @lock: Spinlock to protect this mailbox instance. + * @write_index: Index in internal buffer to write to. + * @read_index: Index in internal buffer to read from. + * @allocated: Indicates whether this particular mailbox + * id has been allocated by someone. + */ +struct mbox { + struct list_head list; + struct platform_device *pdev; + mbox_recv_cb_t *cb; + void *client_data; + void __iomem *virtbase_peer; + void __iomem *virtbase_local; + u32 buffer[MBOX_BUF_SIZE]; + char name[MBOX_NAME_SIZE]; + struct completion buffer_available; + u8 client_blocked; + spinlock_t lock; + u8 write_index; + u8 read_index; + bool allocated; +}; + +/** + * mbox_setup - Set up a mailbox and return its instance. + * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU, + * 2 for modem DSP. + * @mbox_cb: Pointer to the callback function to be called when a new message + * is received. + * @priv: Client user data which will be returned in the callback. + * + * Returns a mailbox instance to be specified in subsequent calls to mbox_send. + */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv); + +/** + * mbox_send - Send a mailbox message. + * @mbox: Mailbox instance (returned by mbox_setup) + * @mbox_msg: The mailbox message to send. + * @block: Specifies whether this call will block until send is possible, + * or return an error if the mailbox buffer is full. + * + * Returns 0 on success or a negative error code on error. -ENOMEM indicates + * that the internal buffer is full and you have to try again later (or + * specify "block" in order to block until send is possible). + */ +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block); + +#endif /*INC_STE_MBOX_H*/ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h new file mode 100644 index 00000000000..8885f39a642 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -0,0 +1,91 @@ +/* + * Copyright (c) 2009 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ +#ifndef __MACH_PRCMU_REGS_H +#define __MACH_PRCMU_REGS_H + +#include <mach/hardware.h> + +#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) + +#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) +#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) +#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) +#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) +#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) +#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) +#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) +#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) + +/* ARM WFI Standby signal register */ +#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) +#define PRCMU_IOCR (_PRCMU_BASE + 0x310) + +/* CPU mailbox registers */ +#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) +#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) +#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) + +/* Dual A9 core interrupt management unit registers */ +#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) +#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) +#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) +#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) +#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) +#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) +#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) +#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) +#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) +#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) +#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) + +#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) +#define ARM_WAKEUP_MODEM 0x1 + +#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) +#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) + +#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) +#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) +#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) +#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) +#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) +#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) +#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) +#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) + +/* System reset register */ +#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) + +/* Level shifter and clamp control registers */ +#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) +#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) + +/* PRCMU clock/PLL/reset registers */ +#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) +#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) +#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) +#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) +#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) +#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) +#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) +#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) +#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) +#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) + +/* ePOD and memory power signal control registers */ +#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) +#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) + +/* Debug power control unit registers */ +#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) + +/* Miscellaneous unit registers */ +#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) + +#endif /* __MACH_PRCMU__REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h new file mode 100644 index 00000000000..549843ff6db --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * PRCMU f/w APIs + */ +#ifndef __MACH_PRCMU_H +#define __MACH_PRCMU_H + +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +#endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index e978dbd9e21..54bbe648bf5 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer; .type = MT_DEVICE, \ } +#define __MEM_DEV_DESC(x, sz) { \ + .virtual = IO_ADDRESS(x), \ + .pfn = __phys_to_pfn(x), \ + .length = sz, \ + .type = MT_MEMORY, \ +} + #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h index b59f7bc9725..197e8417375 100644 --- a/arch/arm/mach-ux500/include/mach/smp.h +++ b/arch/arm/mach-ux500/include/mach/smp.h @@ -10,18 +10,11 @@ #define ASMARM_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* This is required to wakeup the secondary core */ extern void u8500_secondary_startup(void); -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - /* * We use IRQ1 as the IPI */ diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c new file mode 100644 index 00000000000..63435389c54 --- /dev/null +++ b/arch/arm/mach-ux500/mbox.c @@ -0,0 +1,567 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +/* + * Mailbox nomenclature: + * + * APE MODEM + * mbox pairX + * .......................... + * . . + * . peer . + * . send ---- . + * . --> | | . + * . | | . + * . ---- . + * . . + * . local . + * . rec ---- . + * . | | <-- . + * . | | . + * . ---- . + * ......................... + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/completion.h> +#include <mach/mbox.h> + +#define MBOX_NAME "mbox" + +#define MBOX_FIFO_DATA 0x000 +#define MBOX_FIFO_ADD 0x004 +#define MBOX_FIFO_REMOVE 0x008 +#define MBOX_FIFO_THRES_FREE 0x00C +#define MBOX_FIFO_THRES_OCCUP 0x010 +#define MBOX_FIFO_STATUS 0x014 + +#define MBOX_DISABLE_IRQ 0x4 +#define MBOX_ENABLE_IRQ 0x0 +#define MBOX_LATCH 1 + +/* Global list of all mailboxes */ +static struct list_head mboxs = LIST_HEAD_INIT(mboxs); + +static struct mbox *get_mbox_with_id(u8 id) +{ + u8 i; + struct list_head *pos = &mboxs; + for (i = 0; i <= id; i++) + pos = pos->next; + + return (struct mbox *) list_entry(pos, struct mbox, list); +} + +int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block) +{ + int res = 0; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "About to buffer 0x%X to mailbox 0x%X." + " ri = %d, wi = %d\n", + mbox_msg, (u32)mbox, mbox->read_index, + mbox->write_index); + + /* Check if write buffer is full */ + while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) { + if (!block) { + dev_dbg(&(mbox->pdev->dev), + "Buffer full in non-blocking call! " + "Returning -ENOMEM!\n"); + res = -ENOMEM; + goto exit; + } + spin_unlock(&mbox->lock); + dev_dbg(&(mbox->pdev->dev), + "Buffer full in blocking call! Sleeping...\n"); + mbox->client_blocked = 1; + wait_for_completion(&mbox->buffer_available); + dev_dbg(&(mbox->pdev->dev), + "Blocking send was woken up! Trying again...\n"); + spin_lock(&mbox->lock); + } + + mbox->buffer[mbox->write_index] = mbox_msg; + mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE; + + /* + * Indicate that we want an IRQ as soon as there is a slot + * in the FIFO + */ + writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + +exit: + spin_unlock(&mbox->lock); + return res; +} +EXPORT_SYMBOL(mbox_send); + +#if defined(CONFIG_DEBUG_FS) +/* + * Expected input: <value> <nbr sends> + * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times + */ +static ssize_t mbox_write_fifo(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + unsigned long mbox_mess; + unsigned long nbr_sends; + unsigned long i; + char int_buf[16]; + char *token; + char *val; + + struct mbox *mbox = (struct mbox *) dev->platform_data; + + strncpy((char *) &int_buf, buf, sizeof(int_buf)); + token = (char *) &int_buf; + + /* Parse message */ + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0)) + mbox_mess = 0xDEADBEEF; + + val = strsep(&token, " "); + if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0)) + nbr_sends = 1; + + dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n", + mbox_mess, nbr_sends, (u32) mbox); + + for (i = 0; i < nbr_sends; i++) + mbox_send(mbox, mbox_mess, true); + + return count; +} + +static ssize_t mbox_read_fifo(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int mbox_value; + struct mbox *mbox = (struct mbox *) dev->platform_data; + + if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0) + return sprintf(buf, "Mailbox is empty\n"); + + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + return sprintf(buf, "0x%X\n", mbox_value); +} + +static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); + +static int mbox_show(struct seq_file *s, void *data) +{ + struct list_head *pos; + u8 mbox_index = 0; + + list_for_each(pos, &mboxs) { + struct mbox *m = + (struct mbox *) list_entry(pos, struct mbox, list); + if (m == NULL) { + seq_printf(s, + "Unable to retrieve mailbox %d\n", + mbox_index); + continue; + } + + spin_lock(&m->lock); + if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) { + seq_printf(s, "MAILBOX %d not setup or corrupt\n", + mbox_index); + spin_unlock(&m->lock); + continue; + } + + seq_printf(s, + "===========================\n" + " MAILBOX %d\n" + " PEER MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + " LOCAL MAILBOX DUMP\n" + "---------------------------\n" + "FIFO: 0x%.X (%d)\n" + "Free Threshold: 0x%.2X (%d)\n" + "Occupied Threshold: 0x%.2X (%d)\n" + "Status: 0x%.2X (%d)\n" + " Free spaces (ot): %d (%d)\n" + " Occup spaces (ot): %d (%d)\n" + "===========================\n" + "write_index: %d\n" + "read_index : %d\n" + "===========================\n" + "\n", + mbox_index, + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_DATA), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + readl(m->virtbase_peer + MBOX_FIFO_STATUS), + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1, + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_DATA), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_FREE), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + readl(m->virtbase_local + MBOX_FIFO_STATUS), + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7, + (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1, + m->write_index, m->read_index); + mbox_index++; + spin_unlock(&m->lock); + } + + return 0; +} + +static int mbox_open(struct inode *inode, struct file *file) +{ + return single_open(file, mbox_show, NULL); +} + +static const struct file_operations mbox_operations = { + .owner = THIS_MODULE, + .open = mbox_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +static irqreturn_t mbox_irq(int irq, void *arg) +{ + u32 mbox_value; + int nbr_occup; + int nbr_free; + struct mbox *mbox = (struct mbox *) arg; + + spin_lock(&mbox->lock); + + dev_dbg(&(mbox->pdev->dev), + "mbox IRQ [%d] received. ri = %d, wi = %d\n", + irq, mbox->read_index, mbox->write_index); + + /* + * Check if we have any outgoing messages, and if there is space for + * them in the FIFO. + */ + if (mbox->read_index != mbox->write_index) { + /* + * Check by reading FREE for LOCAL since that indicates + * OCCUP for PEER + */ + nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS) + >> 4) & 0x7; + dev_dbg(&(mbox->pdev->dev), + "Status indicates %d empty spaces in the FIFO!\n", + nbr_free); + + while ((nbr_free > 0) && + (mbox->read_index != mbox->write_index)) { + /* Write the message and latch it into the FIFO */ + writel(mbox->buffer[mbox->read_index], + (mbox->virtbase_peer + MBOX_FIFO_DATA)); + writel(MBOX_LATCH, + (mbox->virtbase_peer + MBOX_FIFO_ADD)); + dev_dbg(&(mbox->pdev->dev), + "Wrote message 0x%X to addr 0x%X\n", + mbox->buffer[mbox->read_index], + (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA)); + + nbr_free--; + mbox->read_index = + (mbox->read_index + 1) % MBOX_BUF_SIZE; + } + + /* + * Check if we still want IRQ:s when there is free + * space to send + */ + if (mbox->read_index != mbox->write_index) { + dev_dbg(&(mbox->pdev->dev), + "Still have messages to send, but FIFO full. " + "Request IRQ again!\n"); + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } else { + dev_dbg(&(mbox->pdev->dev), + "No more messages to send. " + "Do not request IRQ again!\n"); + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + } + + /* + * Check if we can signal any blocked clients that it is OK to + * start buffering again + */ + if (mbox->client_blocked && + (((mbox->write_index + 1) % MBOX_BUF_SIZE) + != mbox->read_index)) { + dev_dbg(&(mbox->pdev->dev), + "Waking up blocked client\n"); + complete(&mbox->buffer_available); + mbox->client_blocked = 0; + } + } + + /* Check if we have any incoming messages */ + nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7; + if (nbr_occup == 0) + goto exit; + + if (mbox->cb == NULL) { + dev_dbg(&(mbox->pdev->dev), "No receive callback registered, " + "leaving %d incoming messages in fifo!\n", nbr_occup); + goto exit; + } + + /* Read and acknowledge the message */ + mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA); + writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE)); + + /* Notify consumer of new mailbox message */ + dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n", + mbox_value); + mbox->cb(mbox_value, mbox->client_data); + +exit: + dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n", + mbox->read_index, mbox->write_index); + spin_unlock(&mbox->lock); + + return IRQ_HANDLED; +} + +/* Setup is executed once for each mbox pair */ +struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv) +{ + struct resource *resource; + int irq; + int res; + struct mbox *mbox; + + mbox = get_mbox_with_id(mbox_id); + if (mbox == NULL) { + dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n", + mbox_id); + goto exit; + } + + /* + * Check if mailbox has been allocated to someone else, + * otherwise allocate it + */ + if (mbox->allocated) { + dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n", + mbox_id); + mbox = NULL; + goto exit; + } + mbox->allocated = true; + + dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n", + mbox_id, (u32)mbox); + + mbox->client_data = priv; + mbox->cb = mbox_cb; + + /* Get addr for peer mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_peer"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox peer resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_peer = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_peer) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + /* Get addr for local mailbox and ioremap it */ + resource = platform_get_resource_byname(mbox->pdev, + IORESOURCE_MEM, + "mbox_local"); + if (resource == NULL) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox local resource\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "Resource name: %s start: 0x%X, end: 0x%X\n", + resource->name, resource->start, resource->end); + mbox->virtbase_local = + ioremap(resource->start, resource->end - resource->start); + if (!mbox->virtbase_local) { + dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n"); + mbox = NULL; + goto exit; + } + dev_dbg(&(mbox->pdev->dev), + "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n", + resource->start, resource->end, (u32) mbox->virtbase_peer); + + init_completion(&mbox->buffer_available); + mbox->client_blocked = 0; + + /* Get IRQ for mailbox and allocate it */ + irq = platform_get_irq_byname(mbox->pdev, "mbox_irq"); + if (irq < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to retrieve mbox irq resource\n"); + mbox = NULL; + goto exit; + } + + dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq); + res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox); + if (res < 0) { + dev_err(&(mbox->pdev->dev), + "Unable to allocate mbox irq %d\n", irq); + mbox = NULL; + goto exit; + } + + /* Set up mailbox to not launch IRQ on free space in mailbox */ + writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE); + + /* + * Set up mailbox to launch IRQ on new message if we have + * a callback set. If not, do not raise IRQ, but keep message + * in FIFO for manual retrieval + */ + if (mbox_cb != NULL) + writel(MBOX_ENABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + else + writel(MBOX_DISABLE_IRQ, + mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP); + +#if defined(CONFIG_DEBUG_FS) + res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo); + if (res != 0) + dev_warn(&(mbox->pdev->dev), + "Unable to create mbox sysfs entry"); + + (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL, + NULL, &mbox_operations); +#endif + + dev_info(&(mbox->pdev->dev), + "Mailbox driver with index %d initated!\n", mbox_id); + +exit: + return mbox; +} +EXPORT_SYMBOL(mbox_setup); + + +int __init mbox_probe(struct platform_device *pdev) +{ + struct mbox local_mbox; + struct mbox *mbox; + int res = 0; + dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev); + + memset(&local_mbox, 0x0, sizeof(struct mbox)); + + /* Associate our mbox data with the platform device */ + res = platform_device_add_data(pdev, + (void *) &local_mbox, + sizeof(struct mbox)); + if (res != 0) { + dev_err(&(pdev->dev), + "Unable to allocate driver platform data!\n"); + goto exit; + } + + mbox = (struct mbox *) pdev->dev.platform_data; + mbox->pdev = pdev; + mbox->write_index = 0; + mbox->read_index = 0; + + INIT_LIST_HEAD(&(mbox->list)); + list_add_tail(&(mbox->list), &mboxs); + + sprintf(mbox->name, "%s", MBOX_NAME); + spin_lock_init(&mbox->lock); + + dev_info(&(pdev->dev), "Mailbox driver loaded\n"); + +exit: + return res; +} + +static struct platform_driver mbox_driver = { + .driver = { + .name = MBOX_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mbox_init(void) +{ + return platform_driver_probe(&mbox_driver, mbox_probe); +} + +module_init(mbox_init); + +void __exit mbox_exit(void) +{ + platform_driver_unregister(&mbox_driver); +} + +module_exit(mbox_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MBOX driver"); diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c new file mode 100644 index 00000000000..3187f887116 --- /dev/null +++ b/arch/arm/mach-ux500/modem_irq.c @@ -0,0 +1,139 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson. + * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define MODEM_INTCON_BASE_ADDR 0xBFFD3000 +#define MODEM_INTCON_SIZE 0xFFF + +#define DEST_IRQ41_OFFSET 0x2A4 +#define DEST_IRQ43_OFFSET 0x2AC +#define DEST_IRQ45_OFFSET 0x2B4 + +#define PRIO_IRQ41_OFFSET 0x6A4 +#define PRIO_IRQ43_OFFSET 0x6AC +#define PRIO_IRQ45_OFFSET 0x6B4 + +#define ALLOW_IRQ_OFFSET 0x104 + +#define MODEM_INTCON_CPU_NBR 0x1 +#define MODEM_INTCON_PRIO_HIGH 0x0 + +#define MODEM_INTCON_ALLOW_IRQ41 0x0200 +#define MODEM_INTCON_ALLOW_IRQ43 0x0800 +#define MODEM_INTCON_ALLOW_IRQ45 0x2000 + +#define MODEM_IRQ_REG_OFFSET 0x4 + +struct modem_irq { + void __iomem *modem_intcon_base; +}; + + +static void setup_modem_intcon(void __iomem *modem_intcon_base) +{ + /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */ + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET); + writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET); + + /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */ + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET); + writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET); + + /* IC_ALLOW_ARRAY - IRQ enable */ + writel(MODEM_INTCON_ALLOW_IRQ41 | + MODEM_INTCON_ALLOW_IRQ43 | + MODEM_INTCON_ALLOW_IRQ45, + modem_intcon_base + ALLOW_IRQ_OFFSET); +} + +static irqreturn_t modem_cpu_irq_handler(int irq, void *data) +{ + int real_irq; + int virt_irq; + struct modem_irq *mi = (struct modem_irq *)data; + + /* Read modem side IRQ number from modem IRQ controller */ + real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF; + virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq; + + pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X " + "which will be 0x%X (%d) which translates to " + "virtual IRQ 0x%X (%d)!\n", + (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET, + real_irq, + real_irq & 0xFF, + real_irq & 0xFF, + virt_irq, + virt_irq); + + if (virt_irq != 0) + generic_handle_irq(virt_irq); + + pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq); + + return IRQ_HANDLED; +} + +static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip) +{ + set_irq_chip(irq, modem_irq_chip); + set_irq_handler(irq, handle_simple_irq); + set_irq_flags(irq, IRQF_VALID); + + pr_debug("modem_irq: Created virtual IRQ %d\n", irq); +} + +static int modem_irq_init(void) +{ + int err; + static struct irq_chip modem_irq_chip; + struct modem_irq *mi; + + pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n", + IRQ_DB5500_MODEM); + + mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL); + if (!mi) { + pr_err("modem_irq: Could not allocate device\n"); + return -ENOMEM; + } + + mi->modem_intcon_base = + ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE); + pr_debug("modem_irq: ioremapped modem_intcon_base from " + "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR, + (u32)mi->modem_intcon_base); + + setup_modem_intcon(mi->modem_intcon_base); + + modem_irq_chip = dummy_irq_chip; + modem_irq_chip.name = "modem_irq"; + + /* Create the virtual IRQ:s needed */ + create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip); + create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip); + + err = request_threaded_irq(IRQ_DB5500_MODEM, NULL, + modem_cpu_irq_handler, IRQF_ONESHOT, + "modem_irq", mi); + if (err) + pr_err("modem_irq: Could not register IRQ %d\n", + IRQ_DB5500_MODEM); + + return 0; +} + +arch_initcall(modem_irq_init); diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h new file mode 100644 index 00000000000..bf50c21fe69 --- /dev/null +++ b/arch/arm/mach-ux500/pins-db5500.h @@ -0,0 +1,620 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __MACH_DB5500_PINS_H +#define __MACH_DB5500_PINS_H + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_SM_A3 PIN_CFG(1, ALT_A) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_SM_A4 PIN_CFG(2, ALT_A) +#define GPIO2_SM_AVD PIN_CFG(2, ALT_B) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A) +#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A) +#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A) +#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A) +#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A) +#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A) +#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A) +#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A) +#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A) +#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B) +#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A) +#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B) +#define GPIO14_SM_CKO PIN_CFG(14, ALT_C) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_SM_A5 PIN_CFG(15, ALT_A) +#define GPIO15_SM_CLE PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A) +#define GPIO16_SM_OEn PIN_CFG(16, ALT_B) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A) +#define GPIO17_SM_WEn PIN_CFG(17, ALT_B) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_SM_A6 PIN_CFG(18, ALT_A) +#define GPIO18_SM_ALE PIN_CFG(18, ALT_B) +#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A) +#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A) +#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A) +#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A) +#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A) +#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B) +#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A) +#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B) +#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A) +#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B) +#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A) +#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A) +#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_U0_TXD PIN_CFG(28, ALT_A) +#define GPIO28_SM_A0 PIN_CFG(28, ALT_B) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_U0_RXD PIN_CFG(29, ALT_A) +#define GPIO29_SM_A1 PIN_CFG(29, ALT_B) +#define GPIO29_PWM_0 PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SM_A2 PIN_CFG(30, ALT_B) +#define GPIO30_PWM_1 PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A) +#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B) +#define GPIO31_PWM_2 PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A) +#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A) +#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A) +#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A) +#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A) +#define GPIO64_U0_TXD PIN_CFG(64, ALT_B) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A) +#define GPIO65_U0_RXD PIN_CFG(65, ALT_B) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_USB_STP PIN_CFG(72, ALT_A) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_USB_DIR PIN_CFG(73, ALT_A) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_USB_NXT PIN_CFG(74, ALT_A) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_IRQn PIN_CFG(78, ALT_A) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A) +#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B) +#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A) +#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B) +#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C) + +#define GPIO98_GPIO PIN_CFG(98, GPIO) +#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A) +#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B) +#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C) + +#define GPIO99_GPIO PIN_CFG(99, GPIO) +#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A) +#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B) +#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C) + +#define GPIO100_GPIO PIN_CFG(100, GPIO) +#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A) + +#define GPIO101_GPIO PIN_CFG(101, GPIO) +#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_KP_I0 PIN_CFG(128, ALT_A) +#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_KP_O0 PIN_CFG(129, ALT_A) +#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_KP_I1 PIN_CFG(130, ALT_A) +#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_KP_O1 PIN_CFG(131, ALT_A) +#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_KP_I2 PIN_CFG(132, ALT_A) +#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B) +#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_KP_O2 PIN_CFG(133, ALT_A) +#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B) +#define GPIO133_U0_RXD PIN_CFG(133, ALT_C) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_KP_I3 PIN_CFG(134, ALT_A) +#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B) +#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_KP_O3 PIN_CFG(135, ALT_A) +#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B) +#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_KP_I4 PIN_CFG(136, ALT_A) +#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B) +#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_KP_O4 PIN_CFG(137, ALT_A) +#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B) +#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_KP_I5 PIN_CFG(138, ALT_A) +#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B) +#define GPIO138_U0_TXD PIN_CFG(138, ALT_C) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_KP_O5 PIN_CFG(139, ALT_A) +#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B) +#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_KP_I6 PIN_CFG(140, ALT_A) +#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B) +#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_KP_O6 PIN_CFG(141, ALT_A) +#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B) +#define GPIO141_U0_RXD PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_KP_I7 PIN_CFG(142, ALT_A) +#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B) +#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_KP_O7 PIN_CFG(143, ALT_A) +#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B) +#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A) +#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B) +#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A) +#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B) +#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_PWM_0 PIN_CFG(146, ALT_A) +#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_PWM_1 PIN_CFG(147, ALT_A) +#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_PWM_2 PIN_CFG(148, ALT_A) +#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_GPS_START PIN_CFG(164, ALT_A) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A) +#define GPIO165_U3_RXD PIN_CFG(165, ALT_B) +#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A) +#define GPIO166_U3_TXD PIN_CFG(166, ALT_B) +#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A) +#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B) +#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A) +#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B) +#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A) +#define GPIO169_DDR_RC PIN_CFG(169, ALT_B) +#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A) +#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B) +#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C) + +#define GPIO172_GPIO PIN_CFG(172, GPIO) +#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A) +#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B) +#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C) + +#define GPIO173_GPIO PIN_CFG(173, GPIO) +#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A) +#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B) +#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C) + +#define GPIO174_GPIO PIN_CFG(174, GPIO) +#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A) +#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B) +#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C) + +#define GPIO175_GPIO PIN_CFG(175, GPIO) +#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A) +#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B) +#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C) + +#define GPIO176_GPIO PIN_CFG(176, GPIO) +#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A) +#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B) + +#define GPIO177_GPIO PIN_CFG(177, GPIO) +#define GPIO177_U2_RXD PIN_CFG(177, ALT_A) +#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B) +#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C) + +#define GPIO178_GPIO PIN_CFG(178, GPIO) +#define GPIO178_U2_TXD PIN_CFG(178, ALT_A) +#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B) +#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C) + +#define GPIO179_GPIO PIN_CFG(179, GPIO) +#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A) +#define GPIO179_U3_RXD PIN_CFG(179, ALT_B) +#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C) + +#define GPIO180_GPIO PIN_CFG(180, GPIO) +#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A) +#define GPIO180_U3_TXD PIN_CFG(180, ALT_B) +#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C) + +#define GPIO185_GPIO PIN_CFG(185, GPIO) +#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A) +#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B) + +#define GPIO186_GPIO PIN_CFG(186, GPIO) +#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A) +#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B) + +#define GPIO187_GPIO PIN_CFG(187, GPIO) +#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A) +#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B) + +#define GPIO188_GPIO PIN_CFG(188, GPIO) +#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A) +#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B) + +#define GPIO189_GPIO PIN_CFG(189, GPIO) +#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A) +#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B) + +#define GPIO190_GPIO PIN_CFG(190, GPIO) +#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A) +#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B) + +#define GPIO191_GPIO PIN_CFG(191, GPIO) +#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A) +#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B) +#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A) +#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B) +#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A) +#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B) +#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A) +#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B) +#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A) +#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B) +#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A) +#define GPIO196_U0_RXD PIN_CFG(196, ALT_B) +#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A) +#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A) +#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_U1_TXD PIN_CFG(200, ALT_A) +#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_U1_RXD PIN_CFG(201, ALT_A) +#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A) +#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A) +#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A) +#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B) +#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A) +#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B) +#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A) +#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B) +#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A) +#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B) +#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A) +#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B) +#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A) +#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B) +#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A) +#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A) +#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A) +#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A) +#define GPIO213_LCD_DE PIN_CFG(213, ALT_B) +#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A) +#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B) +#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A) +#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B) +#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A) +#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A) +#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B) +#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A) +#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A) +#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A) +#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A) +#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A) +#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A) +#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A) +#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A) +#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A) +#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A) +#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B) + +#endif diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h index 9055d5d3233..66f8761cc82 100644 --- a/arch/arm/mach-ux500/pins-db8500.h +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -96,57 +96,57 @@ #define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) #define GPIO18_GPIO PIN_CFG(18, GPIO) -#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP) #define GPIO18_U2_RXD PIN_CFG(18, ALT_B) #define GPIO18_MS_IEP PIN_CFG(18, ALT_C) #define GPIO19_GPIO PIN_CFG(19, GPIO) -#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP) #define GPIO19_U2_TXD PIN_CFG(19, ALT_B) #define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) #define GPIO20_GPIO PIN_CFG(20, GPIO) -#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP) #define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) #define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) #define GPIO21_GPIO PIN_CFG(21, GPIO) -#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP) #define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) #define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) #define GPIO22_GPIO PIN_CFG(22, GPIO) -#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP) #define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) #define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) #define GPIO23_GPIO PIN_CFG(23, GPIO) -#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP) #define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) #define GPIO23_MS_CLK PIN_CFG(23, ALT_C) #define GPIO24_GPIO PIN_CFG(24, GPIO) -#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP) #define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) #define GPIO24_MS_BS PIN_CFG(24, ALT_C) #define GPIO25_GPIO PIN_CFG(25, GPIO) -#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP) #define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) #define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) #define GPIO26_GPIO PIN_CFG(26, GPIO) -#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP) #define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) #define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) #define GPIO27_GPIO PIN_CFG(27, GPIO) -#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP) #define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) #define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) #define GPIO28_GPIO PIN_CFG(28, GPIO) -#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP) #define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) #define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) @@ -357,48 +357,48 @@ #define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) #define GPIO128_GPIO PIN_CFG(128, GPIO) -#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP) #define GPIO128_SM_CKO PIN_CFG(128, ALT_B) #define GPIO129_GPIO PIN_CFG(129, GPIO) -#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP) #define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) #define GPIO130_GPIO PIN_CFG(130, GPIO) -#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP) #define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) #define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) #define GPIO131_GPIO PIN_CFG(131, GPIO) -#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP) #define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) #define GPIO132_GPIO PIN_CFG(132, GPIO) -#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP) #define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) #define GPIO133_GPIO PIN_CFG(133, GPIO) -#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP) #define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) #define GPIO134_GPIO PIN_CFG(134, GPIO) -#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP) #define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) #define GPIO135_GPIO PIN_CFG(135, GPIO) -#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP) #define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) #define GPIO136_GPIO PIN_CFG(136, GPIO) -#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP) #define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) #define GPIO137_GPIO PIN_CFG(137, GPIO) -#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP) #define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) #define GPIO138_GPIO PIN_CFG(138, GPIO) -#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP) #define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) #define GPIO139_GPIO PIN_CFG(139, GPIO) @@ -569,39 +569,39 @@ #define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) #define GPIO197_GPIO PIN_CFG(197, GPIO) -#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) +#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP) #define GPIO198_GPIO PIN_CFG(198, GPIO) -#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) +#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP) #define GPIO199_GPIO PIN_CFG(199, GPIO) -#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) +#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP) #define GPIO200_GPIO PIN_CFG(200, GPIO) -#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) +#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP) #define GPIO201_GPIO PIN_CFG(201, GPIO) -#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) +#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP) #define GPIO202_GPIO PIN_CFG(202, GPIO) -#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP) #define GPIO202_PWL PIN_CFG(202, ALT_B) #define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) #define GPIO203_GPIO PIN_CFG(203, GPIO) -#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) +#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP) #define GPIO204_GPIO PIN_CFG(204, GPIO) -#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) +#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP) #define GPIO205_GPIO PIN_CFG(205, GPIO) -#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) +#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP) #define GPIO206_GPIO PIN_CFG(206, GPIO) -#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) +#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP) #define GPIO207_GPIO PIN_CFG(207, GPIO) -#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) +#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP) #define GPIO208_GPIO PIN_CFG(208, GPIO) #define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 438ef16aec9..9e4c678de78 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1); + smp_cross_call(cpumask_of(cpu)); + timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { if (pen_release == -1) diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c new file mode 100644 index 00000000000..293274d1342 --- /dev/null +++ b/arch/arm/mach-ux500/prcmu.c @@ -0,0 +1,231 @@ +/* + * Copyright (C) ST Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * + * U8500 PRCMU driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mutex.h> +#include <linux/completion.h> +#include <linux/jiffies.h> +#include <linux/bitops.h> +#include <linux/interrupt.h> + +#include <mach/hardware.h> +#include <mach/prcmu-regs.h> + +#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE) + +#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44) +#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4) + +#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) +#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) +#define REQ_MB5_I2C_REG (REQ_MB5 + 2) +#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) + +#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) +#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) + +#define I2C_WRITE(slave) ((slave) << 1) +#define I2C_READ(slave) (((slave) << 1) | BIT(0)) +#define I2C_STOP_EN BIT(3) + +enum ack_mb5_status { + I2C_WR_OK = 0x01, + I2C_RD_OK = 0x02, +}; + +#define MBOX_BIT BIT +#define NUM_MBOX 8 + +static struct { + struct mutex lock; + struct completion work; + bool failed; + struct { + u8 status; + u8 value; + } ack; +} mb5_transfer; + +/** + * prcmu_abb_read() - Read register value(s) from the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The read out value(s). + * @size: The number of registers to read. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_read timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); + if (!r) + *value = mb5_transfer.ack.value; + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_read); + +/** + * prcmu_abb_write() - Write register value(s) to the ABB. + * @slave: The I2C slave address. + * @reg: The (start) register address. + * @value: The value(s) to write. + * @size: The number of registers to write. + * + * Reads register value(s) from the ABB. + * @size has to be 1 for the current firmware version. + */ +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + int r; + + if (size != 1) + return -EINVAL; + + r = mutex_lock_interruptible(&mb5_transfer.lock); + if (r) + return r; + + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) + cpu_relax(); + + writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); + writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); + writeb(reg, REQ_MB5_I2C_REG); + writeb(*value, REQ_MB5_I2C_VAL); + + writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); + if (!wait_for_completion_timeout(&mb5_transfer.work, + msecs_to_jiffies(500))) { + pr_err("prcmu: prcmu_abb_write timed out.\n"); + r = -EIO; + goto unlock_and_return; + } + r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); + +unlock_and_return: + mutex_unlock(&mb5_transfer.lock); + return r; +} +EXPORT_SYMBOL(prcmu_abb_write); + +static void read_mailbox_0(void) +{ + writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_1(void) +{ + writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_2(void) +{ + writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_3(void) +{ + writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_4(void) +{ + writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_5(void) +{ + mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); + mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); + complete(&mb5_transfer.work); + writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_6(void) +{ + writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); +} + +static void read_mailbox_7(void) +{ + writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); +} + +static void (* const read_mailbox[NUM_MBOX])(void) = { + read_mailbox_0, + read_mailbox_1, + read_mailbox_2, + read_mailbox_3, + read_mailbox_4, + read_mailbox_5, + read_mailbox_6, + read_mailbox_7 +}; + +static irqreturn_t prcmu_irq_handler(int irq, void *data) +{ + u32 bits; + u8 n; + + bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); + if (unlikely(!bits)) + return IRQ_NONE; + + for (n = 0; bits; n++) { + if (bits & MBOX_BIT(n)) { + bits -= MBOX_BIT(n); + read_mailbox[n](); + } + } + return IRQ_HANDLED; +} + +static int __init prcmu_init(void) +{ + mutex_init(&mb5_transfer.lock); + init_completion(&mb5_transfer.work); + + /* Clean up the mailbox interrupts after pre-kernel code. */ + writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); + + return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL); +} + +arch_initcall(prcmu_init); diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h new file mode 100644 index 00000000000..cb2110c3285 --- /dev/null +++ b/arch/arm/mach-ux500/ste-dma40-db5500.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + * + * DB5500-SoC-specific configuration for DMA40 + */ + +#ifndef STE_DMA40_DB5500_H +#define STE_DMA40_DB5500_H + +#define DB5500_DMA_NR_DEV 64 + +enum dma_src_dev_type { + DB5500_DMA_DEV0_SPI0_RX = 0, + DB5500_DMA_DEV1_SPI1_RX = 1, + DB5500_DMA_DEV2_SPI2_RX = 2, + DB5500_DMA_DEV3_SPI3_RX = 3, + DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6, + DB5500_DMA_DEV7_IRDA_RFS = 7, + DB5500_DMA_DEV8_IRDA_FIFO_RX = 8, + DB5500_DMA_DEV9_MSP0_RX = 9, + DB5500_DMA_DEV10_MSP1_RX = 10, + DB5500_DMA_DEV11_MSP2_RX = 11, + DB5500_DMA_DEV12_UART0_RX = 12, + DB5500_DMA_DEV13_UART1_RX = 13, + DB5500_DMA_DEV14_UART2_RX = 14, + DB5500_DMA_DEV15_UART3_RX = 15, + DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_RX = 24, + DB5500_DMA_DEV25_SDMMC1_RX = 25, + DB5500_DMA_DEV26_SDMMC2_RX = 26, + DB5500_DMA_DEV27_SDMMC3_RX = 27, + DB5500_DMA_DEV28_SDMMC4_RX = 28, + /* 29 - 32 not used */ + DB5500_DMA_DEV33_SDMMC0_RX = 33, + DB5500_DMA_DEV34_SDMMC1_RX = 34, + DB5500_DMA_DEV35_SDMMC2_RX = 35, + DB5500_DMA_DEV36_SDMMC3_RX = 36, + DB5500_DMA_DEV37_SDMMC4_RX = 37, + DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_MCDE_RX = 47, + DB5500_DMA_DEV48_CRYPTO1_RX = 48, + /* 49, 50 not used */ + DB5500_DMA_DEV49_I2C1_RX = 51, + DB5500_DMA_DEV50_I2C3_RX = 52, + DB5500_DMA_DEV51_I2C2_RX = 53, + /* 54 - 60 not used */ + DB5500_DMA_DEV61_CRYPTO0_RX = 61, + /* 62, 63 not used */ +}; + +enum dma_dest_dev_type { + DB5500_DMA_DEV0_SPI0_TX = 0, + DB5500_DMA_DEV1_SPI1_TX = 1, + DB5500_DMA_DEV2_SPI2_TX = 2, + DB5500_DMA_DEV3_SPI3_TX = 3, + DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4, + DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5, + DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6, + DB5500_DMA_DEV7_IRRC_TX = 7, + DB5500_DMA_DEV8_IRDA_FIFO_TX = 8, + DB5500_DMA_DEV9_MSP0_TX = 9, + DB5500_DMA_DEV10_MSP1_TX = 10, + DB5500_DMA_DEV11_MSP2_TX = 11, + DB5500_DMA_DEV12_UART0_TX = 12, + DB5500_DMA_DEV13_UART1_TX = 13, + DB5500_DMA_DEV14_UART2_TX = 14, + DB5500_DMA_DEV15_UART3_TX = 15, + DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16, + DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17, + DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18, + DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19, + DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20, + DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21, + DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22, + DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23, + DB5500_DMA_DEV24_SDMMC0_TX = 24, + DB5500_DMA_DEV25_SDMMC1_TX = 25, + DB5500_DMA_DEV26_SDMMC2_TX = 26, + DB5500_DMA_DEV27_SDMMC3_TX = 27, + DB5500_DMA_DEV28_SDMMC4_TX = 28, + /* 29 - 31 not used */ + DB5500_DMA_DEV32_FSMC_TX = 32, + DB5500_DMA_DEV33_SDMMC0_TX = 33, + DB5500_DMA_DEV34_SDMMC1_TX = 34, + DB5500_DMA_DEV35_SDMMC2_TX = 35, + DB5500_DMA_DEV36_SDMMC3_TX = 36, + DB5500_DMA_DEV37_SDMMC4_TX = 37, + DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38, + DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39, + DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40, + DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41, + DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42, + DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43, + DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44, + DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45, + /* 46 not used */ + DB5500_DMA_DEV47_STM_TX = 47, + DB5500_DMA_DEV48_CRYPTO1_TX = 48, + DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49, + DB5500_DMA_DEV50_HASH1_TX = 50, + DB5500_DMA_DEV51_I2C1_TX = 51, + DB5500_DMA_DEV52_I2C3_TX = 52, + DB5500_DMA_DEV53_I2C2_TX = 53, + /* 54, 55 not used */ + DB5500_DMA_MEMCPY_TX_1 = 56, + DB5500_DMA_MEMCPY_TX_2 = 57, + DB5500_DMA_MEMCPY_TX_3 = 58, + DB5500_DMA_MEMCPY_TX_4 = 59, + DB5500_DMA_MEMCPY_TX_5 = 60, + DB5500_DMA_DEV61_CRYPTO0_TX = 61, + DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62, + DB5500_DMA_DEV63_HASH0_TX = 63, +}; + +#endif diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h index 9d9d3797b3b..a616419bea7 100644 --- a/arch/arm/mach-ux500/ste-dma40-db8500.h +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -10,145 +10,135 @@ #ifndef STE_DMA40_DB8500_H #define STE_DMA40_DB8500_H -#define STEDMA40_NR_DEV 64 +#define DB8500_DMA_NR_DEV 64 enum dma_src_dev_type { - STEDMA40_DEV_SPI0_RX = 0, - STEDMA40_DEV_SD_MMC0_RX = 1, - STEDMA40_DEV_SD_MMC1_RX = 2, - STEDMA40_DEV_SD_MMC2_RX = 3, - STEDMA40_DEV_I2C1_RX = 4, - STEDMA40_DEV_I2C3_RX = 5, - STEDMA40_DEV_I2C2_RX = 6, - STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_RX = 8, - STEDMA40_DEV_SSP1_RX = 9, - STEDMA40_DEV_MCDE_RX = 10, - STEDMA40_DEV_UART2_RX = 11, - STEDMA40_DEV_UART1_RX = 12, - STEDMA40_DEV_UART0_RX = 13, - STEDMA40_DEV_MSP2_RX = 14, - STEDMA40_DEV_I2C0_RX = 15, - STEDMA40_DEV_USB_OTG_IEP_8 = 16, - STEDMA40_DEV_USB_OTG_IEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_IEP_2_10 = 18, - STEDMA40_DEV_USB_OTG_IEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23, - STEDMA40_DEV_SRC_SXA0_RX_TX = 24, - STEDMA40_DEV_SRC_SXA1_RX_TX = 25, - STEDMA40_DEV_SRC_SXA2_RX_TX = 26, - STEDMA40_DEV_SRC_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_RX = 28, - STEDMA40_DEV_SD_MM0_RX = 29, - STEDMA40_DEV_MSP1_RX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_RX = 31, - STEDMA40_DEV_MSP0_RX = 31, - STEDMA40_DEV_SD_MM1_RX = 32, - STEDMA40_DEV_SPI2_RX = 33, - STEDMA40_DEV_I2C3_RX2 = 34, - STEDMA40_DEV_SPI1_RX = 35, - STEDMA40_DEV_USB_OTG_IEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_IEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_IEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_IEP_7_15 = 39, - STEDMA40_DEV_SPI3_RX = 40, - STEDMA40_DEV_SD_MM3_RX = 41, - STEDMA40_DEV_SD_MM4_RX = 42, - STEDMA40_DEV_SD_MM5_RX = 43, - STEDMA40_DEV_SRC_SXA4_RX_TX = 44, - STEDMA40_DEV_SRC_SXA5_RX_TX = 45, - STEDMA40_DEV_SRC_SXA6_RX_TX = 46, - STEDMA40_DEV_SRC_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_RX = 48, - /* RX channels 49 and 50 are unused */ - STEDMA40_DEV_MSHC_RX = 51, - STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55, - /* RX channels 56 thru 60 are unused */ - STEDMA40_DEV_CAC0_RX = 61, - /* RX channels 62 and 63 are unused */ + DB8500_DMA_DEV0_SPI0_RX = 0, + DB8500_DMA_DEV1_SD_MMC0_RX = 1, + DB8500_DMA_DEV2_SD_MMC1_RX = 2, + DB8500_DMA_DEV3_SD_MMC2_RX = 3, + DB8500_DMA_DEV4_I2C1_RX = 4, + DB8500_DMA_DEV5_I2C3_RX = 5, + DB8500_DMA_DEV6_I2C2_RX = 6, + DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_RX = 8, + DB8500_DMA_DEV9_SSP1_RX = 9, + DB8500_DMA_DEV10_MCDE_RX = 10, + DB8500_DMA_DEV11_UART2_RX = 11, + DB8500_DMA_DEV12_UART1_RX = 12, + DB8500_DMA_DEV13_UART0_RX = 13, + DB8500_DMA_DEV14_MSP2_RX = 14, + DB8500_DMA_DEV15_I2C0_RX = 15, + DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23, + DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_RX = 28, + DB8500_DMA_DEV29_SD_MM0_RX = 29, + DB8500_DMA_DEV30_MSP1_RX = 30, + /* On DB8500v2, MSP3 RX replaces MSP1 RX */ + DB8500_DMA_DEV30_MSP3_RX = 30, + DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31, + DB8500_DMA_DEV32_SD_MM1_RX = 32, + DB8500_DMA_DEV33_SPI2_RX = 33, + DB8500_DMA_DEV34_I2C3_RX2 = 34, + DB8500_DMA_DEV35_SPI1_RX = 35, + DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39, + DB8500_DMA_DEV40_SPI3_RX = 40, + DB8500_DMA_DEV41_SD_MM3_RX = 41, + DB8500_DMA_DEV42_SD_MM4_RX = 42, + DB8500_DMA_DEV43_SD_MM5_RX = 43, + DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_RX = 48, + /* 49, 50 and 51 are not used */ + DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52, + DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53, + DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54, + DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55, + /* 56, 57, 58, 59 and 60 are not used */ + DB8500_DMA_DEV61_CAC0_RX = 61, + /* 62 and 63 are not used */ }; enum dma_dest_dev_type { - STEDMA40_DEV_SPI0_TX = 0, - STEDMA40_DEV_SD_MMC0_TX = 1, - STEDMA40_DEV_SD_MMC1_TX = 2, - STEDMA40_DEV_SD_MMC2_TX = 3, - STEDMA40_DEV_I2C1_TX = 4, - STEDMA40_DEV_I2C3_TX = 5, - STEDMA40_DEV_I2C2_TX = 6, - STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */ - STEDMA40_DEV_SSP0_TX = 8, - STEDMA40_DEV_SSP1_TX = 9, - /* TX channel 10 is unused */ - STEDMA40_DEV_UART2_TX = 11, - STEDMA40_DEV_UART1_TX = 12, - STEDMA40_DEV_UART0_TX= 13, - STEDMA40_DEV_MSP2_TX = 14, - STEDMA40_DEV_I2C0_TX = 15, - STEDMA40_DEV_USB_OTG_OEP_8 = 16, - STEDMA40_DEV_USB_OTG_OEP_1_9 = 17, - STEDMA40_DEV_USB_OTG_OEP_2_10= 18, - STEDMA40_DEV_USB_OTG_OEP_3_11 = 19, - STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20, - STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21, - STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22, - STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23, - STEDMA40_DEV_DST_SXA0_RX_TX = 24, - STEDMA40_DEV_DST_SXA1_RX_TX = 25, - STEDMA40_DEV_DST_SXA2_RX_TX = 26, - STEDMA40_DEV_DST_SXA3_RX_TX = 27, - STEDMA40_DEV_SD_MM2_TX = 28, - STEDMA40_DEV_SD_MM0_TX = 29, - STEDMA40_DEV_MSP1_TX = 30, - /* - * This channel is either SlimBus or MSP, - * never both at the same time. - */ - STEDMA40_SLIM0_CH0_TX = 31, - STEDMA40_DEV_MSP0_TX = 31, - STEDMA40_DEV_SD_MM1_TX = 32, - STEDMA40_DEV_SPI2_TX = 33, - /* Secondary I2C3 channel */ - STEDMA40_DEV_I2C3_TX2 = 34, - STEDMA40_DEV_SPI1_TX = 35, - STEDMA40_DEV_USB_OTG_OEP_4_12 = 36, - STEDMA40_DEV_USB_OTG_OEP_5_13 = 37, - STEDMA40_DEV_USB_OTG_OEP_6_14 = 38, - STEDMA40_DEV_USB_OTG_OEP_7_15 = 39, - STEDMA40_DEV_SPI3_TX = 40, - STEDMA40_DEV_SD_MM3_TX = 41, - STEDMA40_DEV_SD_MM4_TX = 42, - STEDMA40_DEV_SD_MM5_TX = 43, - STEDMA40_DEV_DST_SXA4_RX_TX = 44, - STEDMA40_DEV_DST_SXA5_RX_TX = 45, - STEDMA40_DEV_DST_SXA6_RX_TX = 46, - STEDMA40_DEV_DST_SXA7_RX_TX = 47, - STEDMA40_DEV_CAC1_TX = 48, - STEDMA40_DEV_CAC1_TX_HAC1_TX = 49, - STEDMA40_DEV_HAC1_TX = 50, - STEDMA40_MEMCPY_TX_0 = 51, - STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52, - STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53, - STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54, - STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55, - STEDMA40_MEMCPY_TX_1 = 56, - STEDMA40_MEMCPY_TX_2 = 57, - STEDMA40_MEMCPY_TX_3 = 58, - STEDMA40_MEMCPY_TX_4 = 59, - STEDMA40_MEMCPY_TX_5 = 60, - STEDMA40_DEV_CAC0_TX = 61, - STEDMA40_DEV_CAC0_TX_HAC0_TX = 62, - STEDMA40_DEV_HAC0_TX = 63, + DB8500_DMA_DEV0_SPI0_TX = 0, + DB8500_DMA_DEV1_SD_MMC0_TX = 1, + DB8500_DMA_DEV2_SD_MMC1_TX = 2, + DB8500_DMA_DEV3_SD_MMC2_TX = 3, + DB8500_DMA_DEV4_I2C1_TX = 4, + DB8500_DMA_DEV5_I2C3_TX = 5, + DB8500_DMA_DEV6_I2C2_TX = 6, + DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */ + DB8500_DMA_DEV8_SSP0_TX = 8, + DB8500_DMA_DEV9_SSP1_TX = 9, + /* 10 is not used*/ + DB8500_DMA_DEV11_UART2_TX = 11, + DB8500_DMA_DEV12_UART1_TX = 12, + DB8500_DMA_DEV13_UART0_TX = 13, + DB8500_DMA_DEV14_MSP2_TX = 14, + DB8500_DMA_DEV15_I2C0_TX = 15, + DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16, + DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17, + DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18, + DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19, + DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20, + DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21, + DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22, + DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23, + DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24, + DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25, + DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26, + DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27, + DB8500_DMA_DEV28_SD_MM2_TX = 28, + DB8500_DMA_DEV29_SD_MM0_TX = 29, + DB8500_DMA_DEV30_MSP1_TX = 30, + DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31, + DB8500_DMA_DEV32_SD_MM1_TX = 32, + DB8500_DMA_DEV33_SPI2_TX = 33, + DB8500_DMA_DEV34_I2C3_TX2 = 34, + DB8500_DMA_DEV35_SPI1_TX = 35, + DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36, + DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37, + DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38, + DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39, + DB8500_DMA_DEV40_SPI3_TX = 40, + DB8500_DMA_DEV41_SD_MM3_TX = 41, + DB8500_DMA_DEV42_SD_MM4_TX = 42, + DB8500_DMA_DEV43_SD_MM5_TX = 43, + DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44, + DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45, + DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46, + DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47, + DB8500_DMA_DEV48_CAC1_TX = 48, + DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49, + DB8500_DMA_DEV50_HAC1_TX = 50, + DB8500_DMA_MEMCPY_TX_0 = 51, + DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52, + DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53, + DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54, + DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55, + DB8500_DMA_MEMCPY_TX_1 = 56, + DB8500_DMA_MEMCPY_TX_2 = 57, + DB8500_DMA_MEMCPY_TX_3 = 58, + DB8500_DMA_MEMCPY_TX_4 = 59, + DB8500_DMA_MEMCPY_TX_5 = 60, + DB8500_DMA_DEV61_CAC0_TX = 61, + DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62, + DB8500_DMA_DEV63_HAC0_TX = 63, }; #endif diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 577df6cccb0..efb127022d4 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -227,7 +227,13 @@ static void ct_ca9x4_init(void) int i; #ifdef CONFIG_CACHE_L2X0 - l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff); + void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC); + + /* set RAM latencies to 1 cycle for this core tile. */ + writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL); + + l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff); #endif clkdev_add_table(lookups, ARRAY_SIZE(lookups)); diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h index 72a9621ed08..5a6da4fd247 100644 --- a/arch/arm/mach-vexpress/include/mach/smp.h +++ b/arch/arm/mach-vexpress/include/mach/smp.h @@ -2,14 +2,7 @@ #define __MACH_SMP_H #include <asm/hardware/gic.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) +#include <asm/smp_mpidr.h> /* * We use IRQ1 as the IPI diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 33c3f570aaa..a0a2928ae4d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -398,7 +398,7 @@ config CPU_V6 # ARMv6k config CPU_32v6K bool "Support ARM V6K processor extensions" if !SMP - depends on CPU_V6 + depends on CPU_V6 || CPU_V7 default y if SMP && !(ARCH_MX3 || ARCH_OMAP2) help Say Y here if your ARMv6 processor supports the 'K' extension. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index d073b64ae87..724ba3bce72 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_SIGNAL) force_sig(SIGBUS, current); - else - set_cr(cr_no_alignment); + else { + /* + * We're about to disable the alignment trap and return to + * user space. But if an interrupt occurs before actually + * reaching user space, then the IRQ vector entry code will + * notice that we were still in kernel space and therefore + * the alignment trap won't be re-enabled in that case as it + * is presumed to be always on from kernel space. + * Let's prevent that race by disabling interrupts here (they + * are disabled on the way back to user space anyway in + * entry-common.S) and disable the alignment trap only if + * there is no work pending for this thread. + */ + raw_local_irq_disable(); + if (!(current_thread_info()->flags & _TIF_WORK_MASK)) + set_cr(cr_no_alignment); + } return 0; } diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 86aa689ef1a..99fa688dfad 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -21,18 +21,22 @@ #define D_CACHE_LINE_SIZE 32 #define BTB_FLUSH_SIZE 8 -#ifdef CONFIG_ARM_ERRATA_411920 /* - * Invalidate the entire I cache (this code is a workaround for the ARM1136 - * erratum 411920 - Invalidate Instruction Cache operation can fail. This - * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore. + * v6_flush_icache_all() + * + * Flush the whole I-cache. * - * Registers: - * r0 - set to 0 - * r1 - corrupted + * ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail. + * This erratum is present in 1136, 1156 and 1176. It does not affect the + * MPCore. + * + * Registers: + * r0 - set to 0 + * r1 - corrupted */ -ENTRY(v6_icache_inval_all) +ENTRY(v6_flush_icache_all) mov r0, #0 +#ifdef CONFIG_ARM_ERRATA_411920 mrs r1, cpsr cpsid ifa @ disable interrupts mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache @@ -43,8 +47,11 @@ ENTRY(v6_icache_inval_all) .rept 11 @ ARM Ltd recommends at least nop @ 11 NOPs .endr - mov pc, lr +#else + mcr p15, 0, r0, c7, c5, 0 @ invalidate I-cache #endif + mov pc, lr +ENDPROC(v6_flush_icache_all) /* * v6_flush_cache_all() @@ -60,7 +67,7 @@ ENTRY(v6_flush_kern_cache_all) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate @@ -138,7 +145,7 @@ ENTRY(v6_coherent_user_range) #ifndef CONFIG_ARM_ERRATA_411920 mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate #else - b v6_icache_inval_all + b v6_flush_icache_all #endif #else mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB @@ -312,6 +319,7 @@ ENDPROC(v6_dma_unmap_area) .type v6_cache_fns, #object ENTRY(v6_cache_fns) + .long v6_flush_icache_all .long v6_flush_kern_cache_all .long v6_flush_user_cache_all .long v6_flush_user_cache_range diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 37c8157e116..a3ebf7a4f49 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -18,6 +18,21 @@ #include "proc-macros.S" /* + * v7_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7_flush_icache_all) + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + mov pc, lr +ENDPROC(v7_flush_icache_all) + +/* * v7_flush_dcache_all() * * Flush the whole D-cache. @@ -91,11 +106,8 @@ ENTRY(v7_flush_kern_cache_all) THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) bl v7_flush_dcache_all mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 0 @ invalidate I-cache inner shareable -#else - mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) mov pc, lr @@ -171,11 +183,8 @@ ENTRY(v7_coherent_user_range) cmp r0, r1 blo 1b mov r0, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r0, c7, c1, 6 @ invalidate BTB Inner Shareable -#else - mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB -#endif + ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB dsb isb mov pc, lr @@ -309,6 +318,7 @@ ENDPROC(v7_dma_unmap_area) .type v7_cache_fns, #object ENTRY(v7_cache_fns) + .long v7_flush_icache_all .long v7_flush_kern_cache_all .long v7_flush_user_cache_all .long v7_flush_user_cache_range diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 598c51ad507..b8061519ce7 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -73,7 +73,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index f55fa1044f7..bdba6c65c90 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -79,7 +79,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to, unsigned int offset = CACHE_COLOUR(vaddr); unsigned long kfrom, kto; - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); /* FIXME: not highmem safe */ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index 9920c0ae209..649bbcd325b 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -95,7 +95,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from, { void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + if (!test_and_set_bit(PG_dcache_clean, &from->flags)) __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c704eed63c5..e4dd0646e85 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) } } while (size -= PAGE_SIZE); + dsb(); + return (void *)c->vm_start; } return NULL; @@ -521,6 +523,12 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off, outer_inv_range(paddr, paddr + size); dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + + /* + * Mark the D-cache clean for this page to avoid extra flushing. + */ + if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE) + set_bit(PG_dcache_clean, &page->flags); } EXPORT_SYMBOL(___dma_page_dev_to_cpu); diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 9b906dec1ca..8440d952ba6 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -28,6 +28,7 @@ static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE; +#if __LINUX_ARM_ARCH__ < 6 /* * We take the easy way out of this problem - we make the * PTE uncacheable. However, we leave the write buffer on. @@ -141,7 +142,7 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, * a page table, or changing an existing PTE. Basically, there are two * things that we need to take care of: * - * 1. If PG_dcache_dirty is set for the page, we need to ensure + * 1. If PG_dcache_clean is not set for the page, we need to ensure * that any cache entries for the kernels virtual memory * range are written back to the page. * 2. If we have multiple shared mappings of the same space in @@ -168,10 +169,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, return; mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) __flush_dcache_page(mapping, page); -#endif if (mapping) { if (cache_is_vivt()) make_coherent(mapping, vma, addr, ptep, pfn); @@ -179,6 +178,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, __flush_icache_all(); } } +#endif /* __LINUX_ARM_ARCH__ < 6 */ /* * Check whether the write buffer has physical address aliasing diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index c6844cb9b50..391ffae7509 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -17,6 +17,7 @@ #include <asm/smp_plat.h> #include <asm/system.h> #include <asm/tlbflush.h> +#include <asm/smp_plat.h> #include "mm.h" @@ -39,6 +40,18 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) : "cc"); } +static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len) +{ + unsigned long colour = CACHE_COLOUR(vaddr); + unsigned long offset = vaddr & (PAGE_SIZE - 1); + unsigned long to; + + set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0); + to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset; + flush_tlb_kernel_page(to); + flush_icache_range(to, to + len); +} + void flush_cache_mm(struct mm_struct *mm) { if (cache_is_vivt()) { @@ -89,16 +102,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged()) __flush_icache_all(); } + #else -#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_pfn_alias(pfn,vaddr) do { } while (0) +#define flush_icache_alias(pfn,vaddr,len) do { } while (0) #endif -#ifdef CONFIG_SMP static void flush_ptrace_access_other(void *args) { __flush_icache_all(); } -#endif static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, @@ -118,15 +131,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, return; } - /* VIPT non-aliasing cache */ + /* VIPT non-aliasing D-cache */ if (vma->vm_flags & VM_EXEC) { unsigned long addr = (unsigned long)kaddr; - __cpuc_coherent_kern_range(addr, addr + len); -#ifdef CONFIG_SMP + if (icache_is_vipt_aliasing()) + flush_icache_alias(page_to_pfn(page), uaddr, len); + else + __cpuc_coherent_kern_range(addr, addr + len); if (cache_ops_need_broadcast()) smp_call_function(flush_ptrace_access_other, NULL, 1); -#endif } } @@ -215,6 +229,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p flush_dcache_mmap_unlock(mapping); } +#if __LINUX_ARM_ARCH__ >= 6 +void __sync_icache_dcache(pte_t pteval) +{ + unsigned long pfn; + struct page *page; + struct address_space *mapping; + + if (!pte_present_user(pteval)) + return; + if (cache_is_vipt_nonaliasing() && !pte_exec(pteval)) + /* only flush non-aliasing VIPT caches for exec mappings */ + return; + pfn = pte_pfn(pteval); + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + if (cache_is_vipt_aliasing()) + mapping = page_mapping(page); + else + mapping = NULL; + + if (!test_and_set_bit(PG_dcache_clean, &page->flags)) + __flush_dcache_page(mapping, page); + /* pte_exec() already checked above for non-aliasing VIPT cache */ + if (cache_is_vipt_nonaliasing() || pte_exec(pteval)) + __flush_icache_all(); +} +#endif + /* * Ensure cache coherency between kernel mapping and userspace mapping * of this page. @@ -246,17 +290,16 @@ void flush_dcache_page(struct page *page) mapping = page_mapping(page); -#ifndef CONFIG_SMP - if (!PageHighMem(page) && mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); - else -#endif - { + if (!cache_ops_need_broadcast() && + mapping && !mapping_mapped(mapping)) + clear_bit(PG_dcache_clean, &page->flags); + else { __flush_dcache_page(mapping, page); if (mapping && cache_is_vivt()) __flush_dcache_aliases(mapping, page); else if (mapping) __flush_icache_all(); + set_bit(PG_dcache_clean, &page->flags); } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7185b00650f..36c4553ffcc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -277,7 +277,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) /* Register the kernel text, kernel data and initrd with memblock. */ #ifdef CONFIG_XIP_KERNEL - memblock_reserve(__pa(_data), _end - _data); + memblock_reserve(__pa(_sdata), _end - _sdata); #else memblock_reserve(__pa(_stext), _end - _stext); #endif @@ -545,7 +545,7 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_data, _edata)); + MLK_ROUNDUP(_sdata, _edata)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6e1c4f6a2b3..e2335811c02 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -15,6 +15,7 @@ #include <linux/nodemask.h> #include <linux/memblock.h> #include <linux/sort.h> +#include <linux/fs.h> #include <asm/cputype.h> #include <asm/sections.h> @@ -246,6 +247,9 @@ static struct mem_type mem_types[] = { .domain = DOMAIN_USER, }, [MT_MEMORY] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC, + .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, @@ -254,6 +258,9 @@ static struct mem_type mem_types[] = { .domain = DOMAIN_KERNEL, }, [MT_MEMORY_NONCACHED] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, + .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, @@ -303,9 +310,8 @@ static void __init build_mem_type_table(void) cachepolicy = CPOLICY_WRITEBACK; ecc_mask = 0; } -#ifdef CONFIG_SMP - cachepolicy = CPOLICY_WRITEALLOC; -#endif + if (is_smp()) + cachepolicy = CPOLICY_WRITEALLOC; /* * Strip out features not present on earlier architectures. @@ -399,21 +405,22 @@ static void __init build_mem_type_table(void) cp = &cache_policies[cachepolicy]; vecs_pgprot = kern_pgprot = user_pgprot = cp->pte; -#ifndef CONFIG_SMP /* * Only use write-through for non-SMP systems */ - if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) + if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH) vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte; -#endif /* * Enable CPU-specific coherency if supported. * (Only available on XSC3 at the moment.) */ - if (arch_is_coherent() && cpu_is_xsc3()) + if (arch_is_coherent() && cpu_is_xsc3()) { mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + } /* * ARMv6 and above have extended page tables. */ @@ -426,20 +433,23 @@ static void __init build_mem_type_table(void) mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE; -#ifdef CONFIG_SMP - /* - * Mark memory with the "shared" attribute for SMP systems - */ - user_pgprot |= L_PTE_SHARED; - kern_pgprot |= L_PTE_SHARED; - vecs_pgprot |= L_PTE_SHARED; - mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; - mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; -#endif + if (is_smp()) { + /* + * Mark memory with the "shared" attribute + * for SMP systems + */ + user_pgprot |= L_PTE_SHARED; + kern_pgprot |= L_PTE_SHARED; + vecs_pgprot |= L_PTE_SHARED; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + } } /* @@ -475,6 +485,8 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_MEMORY].prot_pte |= kern_pgprot; + mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask; mem_types[MT_ROM].prot_sect |= cp->pmd; switch (cp->pmd) { @@ -498,6 +510,19 @@ static void __init build_mem_type_table(void) } } +#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE +pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot) +{ + if (!pfn_valid(pfn)) + return pgprot_noncached(vma_prot); + else if (file->f_flags & O_SYNC) + return pgprot_writecombine(vma_prot); + return vma_prot; +} +EXPORT_SYMBOL(phys_mem_access_prot); +#endif + #define vectors_base() (vectors_high() ? 0xffff0000 : 0) static void __init *early_alloc(unsigned long sz) @@ -802,8 +827,7 @@ static void __init sanity_check_meminfo(void) * rather difficult. */ reason = "with VIPT aliasing cache"; -#ifdef CONFIG_SMP - } else if (tlb_ops_need_broadcast()) { + } else if (is_smp() && tlb_ops_need_broadcast()) { /* * kmap_high needs to occasionally flush TLB entries, * however, if the TLB entries need to be broadcast @@ -813,7 +837,6 @@ static void __init sanity_check_meminfo(void) * (must not be called with irqs off) */ reason = "without hardware TLB ops broadcasting"; -#endif } if (reason) { printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n", diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 22aac851519..b95662dedb6 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -30,13 +30,10 @@ #define TTB_RGN_WT (2 << 3) #define TTB_RGN_WB (3 << 3) -#ifndef CONFIG_SMP -#define TTB_FLAGS TTB_RGN_WBWA -#define PMD_FLAGS PMD_SECT_WB -#else -#define TTB_FLAGS TTB_RGN_WBWA|TTB_S -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_UP TTB_RGN_WBWA +#define PMD_FLAGS_UP PMD_SECT_WB +#define TTB_FLAGS_SMP TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v6_proc_init) mov pc, lr @@ -97,7 +94,8 @@ ENTRY(cpu_v6_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 @@ -156,9 +154,11 @@ cpu_pj4_name: */ __v6_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) @ Enable SMP/nAMP mode + ALT_UP(nop) orr r0, r0, #0x20 - mcr p15, 0, r0, c1, c0, 1 + ALT_SMP(mcr p15, 0, r0, c1, c0, 1) + ALT_UP(nop) #endif mov r0, #0 @@ -169,7 +169,8 @@ __v6_setup: #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval @@ -225,10 +226,16 @@ cpu_elf_name: __v6_proc_info: .long 0x0007b000 .long 0x0007f000 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ @@ -249,10 +256,16 @@ __v6_proc_info: __pj4_v6_proc_info: .long 0x560f5810 .long 0xff0ffff0 - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 6a8506d99ee..df422fee1cb 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -30,15 +30,13 @@ #define TTB_IRGN_WT ((1 << 0) | (0 << 6)) #define TTB_IRGN_WB ((1 << 0) | (1 << 6)) -#ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ -#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB -#define PMD_FLAGS PMD_SECT_WB -#else +#define TTB_FLAGS_UP TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS_UP PMD_SECT_WB + /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ -#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA -#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S -#endif +#define TTB_FLAGS_SMP TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS_SMP PMD_SECT_WBWA|PMD_SECT_S ENTRY(cpu_v7_proc_init) mov pc, lr @@ -105,7 +103,8 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id - orr r0, r0, #TTB_FLAGS + ALT_SMP(orr r0, r0, #TTB_FLAGS_SMP) + ALT_UP(orr r0, r0, #TTB_FLAGS_UP) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif @@ -186,13 +185,15 @@ cpu_v7_name: * It is assumed that: * - cache type register is implemented */ -__v7_setup: +__v7_ca9mp_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 + ALT_SMP(mrc p15, 0, r0, c1, c0, 1) + ALT_UP(mov r0, #(1 << 6)) @ fake it for UP tst r0, #(1 << 6) @ SMP/nAMP mode enabled? orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif +__v7_setup: adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all @@ -201,11 +202,16 @@ __v7_setup: mrc p15, 0, r0, c0, c0, 0 @ read main ID register and r10, r0, #0xff000000 @ ARM? teq r10, #0x41000000 - bne 2f + bne 3f and r5, r0, #0x00f00000 @ variant and r6, r0, #0x0000000f @ revision - orr r0, r6, r5, lsr #20-4 @ combine variant and revision + orr r6, r6, r5, lsr #20-4 @ combine variant and revision + ubfx r0, r0, #4, #12 @ primary part number + /* Cortex-A8 Errata */ + ldr r10, =0x00000c08 @ Cortex-A8 primary part number + teq r0, r10 + bne 2f #ifdef CONFIG_ARM_ERRATA_430973 teq r5, #0x00100000 @ only present in r1p* mrceq p15, 0, r10, c1, c0, 1 @ read aux control register @@ -213,21 +219,42 @@ __v7_setup: mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_458693 - teq r0, #0x20 @ only present in r2p0 + teq r6, #0x20 @ only present in r2p0 mrceq p15, 0, r10, c1, c0, 1 @ read aux control register orreq r10, r10, #(1 << 5) @ set L1NEON to 1 orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_460075 - teq r0, #0x20 @ only present in r2p0 + teq r6, #0x20 @ only present in r2p0 mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register tsteq r10, #1 << 22 orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif + b 3f + + /* Cortex-A9 Errata */ +2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number + teq r0, r10 + bne 3f +#ifdef CONFIG_ARM_ERRATA_742230 + cmp r6, #0x22 @ only present up to r2p2 + mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrle r10, r10, #1 << 4 @ set bit #4 + mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_742231 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register + orreq r10, r10, #1 << 12 @ set bit #12 + orreq r10, r10, #1 << 22 @ set bit #22 + mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif -2: mov r10, #0 +3: mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif @@ -235,7 +262,8 @@ __v7_setup: #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r10, c2, c0, 2 @ TTB control register - orr r4, r4, #TTB_FLAGS + ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) + ALT_UP(orr r4, r4, #TTB_FLAGS_UP) mcr p15, 0, r4, c2, c0, 1 @ load TTB1 mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register @@ -323,6 +351,35 @@ cpu_elf_name: .section ".proc.info.init", #alloc, #execinstr + .type __v7_ca9mp_proc_info, #object +__v7_ca9mp_proc_info: + .long 0x410fc090 @ Required ID value + .long 0xff0ffff0 @ Mask for ID + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_UP) + .long PMD_TYPE_SECT | \ + PMD_SECT_XN | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __v7_ca9mp_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_v7_name + .long v7_processor_functions + .long v7wbi_tlb_fns + .long v6_user_fns + .long v7_cache_fns + .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info + /* * Match any ARMv7 processor core. */ @@ -330,10 +387,16 @@ cpu_elf_name: __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - .long PMD_TYPE_SECT | \ + ALT_SMP(.long \ + PMD_TYPE_SECT | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP) + ALT_UP(.long \ + PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ | \ - PMD_FLAGS + PMD_FLAGS_UP) .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index f3f288a9546..53cd5b45467 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -13,6 +13,7 @@ */ #include <linux/init.h> #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/tlbflush.h> @@ -41,20 +42,15 @@ ENTRY(v7wbi_flush_user_tlb_range) orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA + add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov ip, #0 -#ifdef CONFIG_SMP - mcr p15, 0, ip, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -74,20 +70,14 @@ ENTRY(v7wbi_flush_kern_tlb_range) mov r0, r0, lsl #PAGE_SHIFT mov r1, r1, lsl #PAGE_SHIFT 1: -#ifdef CONFIG_SMP - mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable) -#else - mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA -#endif + ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable) + ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b mov r2, #0 -#ifdef CONFIG_SMP - mcr p15, 0, r2, c7, c1, 6 @ flush BTAC/BTB Inner Shareable -#else - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB -#endif + ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable + ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB dsb isb mov pc, lr @@ -99,5 +89,6 @@ ENDPROC(v7wbi_flush_kern_tlb_range) ENTRY(v7wbi_tlb_fns) .long v7wbi_flush_user_tlb_range .long v7wbi_flush_kern_tlb_range - .long v7wbi_tlb_flags + ALT_SMP(.long v7wbi_tlb_flags_smp) + ALT_UP(.long v7wbi_tlb_flags_up) .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 0527e65318f..6785db4179b 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -43,6 +43,7 @@ config ARCH_MXC91231 config ARCH_MX5 bool "MX5-based" select CPU_V7 + select ARM_L1_CACHE_SHIFT_6 help This enables support for systems based on the Freescale i.MX51 family diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h index 634e3f4c454..656acb45d43 100644 --- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h +++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h @@ -37,9 +37,9 @@ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51 */ -extern void eukrea_mbimx25_baseboard_init(void); +extern void eukrea_mbimxsd25_baseboard_init(void); extern void eukrea_mbimx27_baseboard_init(void); -extern void eukrea_mbimx35_baseboard_init(void); +extern void eukrea_mbimxsd35_baseboard_init(void); extern void eukrea_mbimx51_baseboard_init(void); #endif diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index b3da9aad429..3703ab28257 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle) return -EAGAIN; for (i = 0; i < 4; i++) { - v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i]; - __raw_writel(v, TZIC_WAKEUP0(i)); + v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : + wakeup_intr[i]; + __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } return 0; diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 977c8f9a07a..85e6fd212a4 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -102,6 +102,22 @@ static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); } +static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + if (val) + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); + else + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + __nmk_gpio_set_output(nmk_chip, offset, val); +} + static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, pin_cfg_t cfg) { @@ -118,20 +134,29 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, [3] /* illegal */ = "??" }; static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change", + [NMK_GPIO_SLPM_INPUT] = "input/wakeup", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", }; int pin = PIN_NUM(cfg); int pull = PIN_PULL(cfg); int af = PIN_ALT(cfg); int slpm = PIN_SLPM(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); - dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n", - pin, afnames[af], pullnames[pull], slpmnames[slpm]); + dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n", + pin, afnames[af], pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : ""); + + if (output) + __nmk_gpio_make_output(nmk_chip, offset, val); + else { + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + } - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); __nmk_gpio_set_slpm(nmk_chip, offset, slpm); __nmk_gpio_set_mode(nmk_chip, offset, af); } @@ -200,6 +225,10 @@ EXPORT_SYMBOL(nmk_config_pins); * changed to an input (with pullup/down enabled) in sleep and deep sleep. If * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was * configured even when in sleep and deep sleep. + * + * On DB8500v2 onwards, this setting loses the previous meaning and instead + * indicates if wakeup detection is enabled on the pin. Note that + * enable_irq_wake() will automatically enable wakeup detection. */ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) { @@ -367,7 +396,27 @@ static void nmk_gpio_irq_unmask(unsigned int irq) static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) { - return nmk_gpio_irq_modify(irq, WAKE, on); + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + int gpio; + + gpio = NOMADIK_IRQ_TO_GPIO(irq); + nmk_chip = get_irq_chip_data(irq); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); +#ifdef CONFIG_ARCH_U8500 + if (cpu_is_u8500v2()) { + __nmk_gpio_set_slpm(nmk_chip, gpio, + on ? NMK_GPIO_SLPM_WAKEUP_ENABLE + : NMK_GPIO_SLPM_WAKEUP_DISABLE); + } +#endif + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; } static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) @@ -495,12 +544,8 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, { struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - if (val) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); + __nmk_gpio_set_output(nmk_chip, offset, val); } static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, @@ -509,8 +554,7 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - nmk_gpio_set_output(chip, offset, val); + __nmk_gpio_make_output(nmk_chip, offset, val); return 0; } @@ -534,7 +578,7 @@ static struct gpio_chip nmk_gpio_template = { .can_sleep = 0, }; -static int __init nmk_gpio_probe(struct platform_device *dev) +static int __devinit nmk_gpio_probe(struct platform_device *dev) { struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; struct nmk_gpio_chip *nmk_chip; diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index aba355101f4..67b113d639d 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -65,7 +65,9 @@ enum nmk_gpio_pull { /* Sleep mode */ enum nmk_gpio_slpm { NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, }; extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 7eed11c1038..8c5ae3f2acf 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -19,12 +19,16 @@ * bit 9..10 - Alternate Function Selection * bit 11..12 - Pull up/down state * bit 13 - Sleep mode behaviour + * bit 14 - (sleep mode) Direction + * bit 15 - (sleep mode) Value (if output) * * to facilitate the definition, the following macros are provided * * PIN_CFG_DEFAULT - default config (0): * pull up/down = disabled - * sleep mode = input + * sleep mode = input/wakeup + * (sleep mode) direction = input + * (sleep mode) value = low * * PIN_CFG - default config with alternate function * PIN_CFG_PULL - default config with alternate function and pull up/down @@ -53,8 +57,36 @@ typedef unsigned long pin_cfg_t; #define PIN_SLPM_SHIFT 13 #define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) #define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) #define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR and VAL. */ +#define PIN_INPUT PIN_DIR_INPUT +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +/* + * These are the same as the ones above, but should make more sense to the + * reader when seen along with a setting a pin to AF mode. + */ +#define PIN_SLPM_INPUT PIN_INPUT +#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW +#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH #define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index ea3ca86c528..aedf9c1d645 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-nomadik/timer.c + * linux/arch/arm/plat-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini @@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, cr = readl(mtu_base + MTU_CR(1)); writel(0, mtu_base + MTU_LR(1)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(0x2, mtu_base + MTU_IMSC); + writel(1 << 1, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -131,25 +131,23 @@ void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - struct clk *clk1; - u32 cr; + u32 cr = MTU_CRn_32BITS; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); - clk1 = clk_get_sys("mtu1", NULL); - BUG_ON(IS_ERR(clk1)); - clk_enable(clk0); - clk_enable(clk1); /* - * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: - * use a divide-by-16 counter if it's more than 16MHz + * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz + * for ux500. + * Use a divide-by-16 counter if the tick rate is more than 32MHz. + * At 32 MHz, the timer (with 32 bit counter) can be programmed + * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer + * with 16 gives too low timer resolution. */ - cr = MTU_CRn_32BITS;; rate = clk_get_rate(clk0); - if (rate > 16 << 20) { + if (rate > 32000000) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; } else { @@ -170,15 +168,8 @@ void __init nmdk_timer_init(void) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); - /* Timer 1 is used for events, fix according to rate */ - cr = MTU_CRn_32BITS; - rate = clk_get_rate(clk1); - if (rate > 16 << 20) { - rate /= 16; - cr |= MTU_CRn_PRESCALE_16; - } else { - cr |= MTU_CRn_PRESCALE_1; - } + /* Timer 1 is used for events */ + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index 5177a9c5a25..ecd6a488c49 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -18,6 +18,7 @@ #define OMAP_ARCH_SMP_H #include <asm/hardware/gic.h> +#include <asm/smp_mpidr.h> /* Needed for secondary core boot */ extern void omap_secondary_startup(void); @@ -33,15 +34,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Read MPIDR: Multiprocessor affinity register - */ -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 226b2e858d6..10b3b4c6337 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -220,20 +220,7 @@ void __init omap_map_sram(void) if (omap_sram_size == 0) return; - if (cpu_is_omap24xx()) { - omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA; - - base = OMAP2_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - } - if (cpu_is_omap34xx()) { - omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA; - base = OMAP3_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - /* * SRAM must be marked as non-cached on OMAP3 since the * CORE DPLL M2 divider change code (in SRAM) runs with the @@ -244,13 +231,11 @@ void __init omap_map_sram(void) omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED; } - if (cpu_is_omap44xx()) { - omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA; - base = OMAP4_SRAM_PA; - base = ROUND_DOWN(base, PAGE_SIZE); - omap_sram_io_desc[0].pfn = __phys_to_pfn(base); - } - omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */ + omap_sram_io_desc[0].virtual = omap_sram_base; + base = omap_sram_start; + base = ROUND_DOWN(base, PAGE_SIZE); + omap_sram_io_desc[0].pfn = __phys_to_pfn(base); + omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE); iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc)); printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n", diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index 0732c6c8d51..ef32686feef 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm) static int __devinit pwm_probe(struct platform_device *pdev) { - struct platform_device_id *id = platform_get_device_id(pdev); + const struct platform_device_id *id = platform_get_device_id(pdev); struct pwm_device *pwm, *secondary = NULL; struct resource *r; int ret = 0; diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c index d3f1a9b5d2b..608770fc153 100644 --- a/arch/arm/plat-s5p/dev-fimc0.c +++ b/arch/arm/plat-s5p/dev-fimc0.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/ioport.h> @@ -18,7 +19,7 @@ static struct resource s5p_fimc0_resource[] = { [0] = { .start = S5P_PA_FIMC0, - .end = S5P_PA_FIMC0 + SZ_1M - 1, + .end = S5P_PA_FIMC0 + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = { }, }; +static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32); + struct platform_device s5p_device_fimc0 = { .name = "s5p-fimc", .id = 0, .num_resources = ARRAY_SIZE(s5p_fimc0_resource), .resource = s5p_fimc0_resource, + .dev = { + .dma_mask = &s5p_fimc0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c index 41bd6986d0a..76e3a97a87d 100644 --- a/arch/arm/plat-s5p/dev-fimc1.c +++ b/arch/arm/plat-s5p/dev-fimc1.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/ioport.h> @@ -18,7 +19,7 @@ static struct resource s5p_fimc1_resource[] = { [0] = { .start = S5P_PA_FIMC1, - .end = S5P_PA_FIMC1 + SZ_1M - 1, + .end = S5P_PA_FIMC1 + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = { }, }; +static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32); + struct platform_device s5p_device_fimc1 = { .name = "s5p-fimc", .id = 1, .num_resources = ARRAY_SIZE(s5p_fimc1_resource), .resource = s5p_fimc1_resource, + .dev = { + .dma_mask = &s5p_fimc1_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c index dfddeda6d4a..24d29816fa2 100644 --- a/arch/arm/plat-s5p/dev-fimc2.c +++ b/arch/arm/plat-s5p/dev-fimc2.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/ioport.h> @@ -18,7 +19,7 @@ static struct resource s5p_fimc2_resource[] = { [0] = { .start = S5P_PA_FIMC2, - .end = S5P_PA_FIMC2 + SZ_1M - 1, + .end = S5P_PA_FIMC2 + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = { }, }; +static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32); + struct platform_device s5p_device_fimc2 = { .name = "s5p-fimc", .id = 2, .num_resources = ARRAY_SIZE(s5p_fimc2_resource), .resource = s5p_fimc2_resource, + .dev = { + .dma_mask = &s5p_fimc2_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, }; diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 57b68a50f45..e3d41eaed1f 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) if (!chip) return -EINVAL; - off = chip->chip.base - pin; + off = pin - chip->chip.base; shift = off * 2; reg = chip->base + 0x0C; drvstr = __raw_readl(reg); - drvstr = 0xffff & (0x3 << shift); drvstr = drvstr >> shift; + drvstr &= 0x3; return (__force s5p_gpio_drvstr_t)drvstr; } @@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) if (!chip) return -EINVAL; - off = chip->chip.base - pin; + off = pin - chip->chip.base; shift = off * 2; reg = chip->base + 0x0C; tmp = __raw_readl(reg); + tmp &= ~(0x3 << shift); tmp |= drvstr << shift; __raw_writel(tmp, reg); diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index db4112c6f2b..1c6b92947c5 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); /* Define values for the drvstr available for each gpio pin. * * These values control the value of the output signal driver strength, - * configurable on most pins on the S5C series. + * configurable on most pins on the S5P series. */ -#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00) -#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01) -#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10) -#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11) +#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x0) +#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x2) +#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x1) +#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x3) /** * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 48cbdcb6bbd..55590a4d87c 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Jul 12 21:10:14 2010 +# Last update: Thu Sep 9 22:43:01 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2622,7 +2622,7 @@ kraken MACH_KRAKEN KRAKEN 2634 gw2388 MACH_GW2388 GW2388 2635 jadecpu MACH_JADECPU JADECPU 2636 carlisle MACH_CARLISLE CARLISLE 2637 -lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638 +lux_sf9 MACH_LUX_SF9 LUX_SF9 2638 nemid_tb MACH_NEMID_TB NEMID_TB 2639 terrier MACH_TERRIER TERRIER 2640 turbot MACH_TURBOT TURBOT 2641 @@ -2950,3 +2950,97 @@ davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963 netviz MACH_NETVIZ NETVIZ 2964 flexibity MACH_FLEXIBITY FLEXIBITY 2965 wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966 +lpc24xx MACH_LPC24XX LPC24XX 2967 +spica MACH_SPICA SPICA 2968 +gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969 +bipnet MACH_BIPNET BIPNET 2970 +overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971 +davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972 +pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973 +ptx7545 MACH_PTX7545 PTX7545 2974 +tm_efdc MACH_TM_EFDC TM_EFDC 2975 +omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977 +flyer MACH_FLYER FLYER 2978 +tornado3240 MACH_TORNADO3240 TORNADO3240 2979 +soli_01 MACH_SOLI_01 SOLI_01 2980 +omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981 +helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982 +netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983 +ssc MACH_SSC SSC 2984 +premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 +wasabi MACH_WASABI WASABI 2986 +vivow MACH_VIVOW VIVOW 2987 +mx50_rdp MACH_MX50_RDP MX50_RDP 2988 +universal MACH_UNIVERSAL UNIVERSAL 2989 +real6410 MACH_REAL6410 REAL6410 2990 +spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 +ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 +omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993 +thebe MACH_THEBE THEBE 2994 +rv082 MACH_RV082 RV082 2995 +armlguest MACH_ARMLGUEST ARMLGUEST 2996 +tjinc1000 MACH_TJINC1000 TJINC1000 2997 +dockstar MACH_DOCKSTAR DOCKSTAR 2998 +ax8008 MACH_AX8008 AX8008 2999 +gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000 +pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001 +ea20 MACH_EA20 EA20 3002 +awm2 MACH_AWM2 AWM2 3003 +ti8148evm MACH_TI8148EVM TI8148EVM 3004 +tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005 +linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006 +tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007 +rubys MACH_RUBYS RUBYS 3008 +aquarius MACH_AQUARIUS AQUARIUS 3009 +mx53_ard MACH_MX53_ARD MX53_ARD 3010 +mx53_smd MACH_MX53_SMD MX53_SMD 3011 +lswxl MACH_LSWXL LSWXL 3012 +dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013 +sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014 +jocpu550 MACH_JOCPU550 JOCPU550 3015 +msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016 +msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017 +yanomami MACH_YANOMAMI YANOMAMI 3018 +gta04 MACH_GTA04 GTA04 3019 +cm_a510 MACH_CM_A510 CM_A510 3020 +omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021 +kx33xx MACH_KX33XX KX33XX 3022 +ptx7510 MACH_PTX7510 PTX7510 3023 +top9000 MACH_TOP9000 TOP9000 3024 +teenote MACH_TEENOTE TEENOTE 3025 +ts3 MACH_TS3 TS3 3026 +a0 MACH_A0 A0 3027 +fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028 +fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029 +frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030 +remus MACH_REMUS REMUS 3031 +at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032 +at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033 +kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034 +oratisrouter MACH_ORATISROUTER ORATISROUTER 3035 +armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036 +spdm MACH_SPDM SPDM 3037 +gtib MACH_GTIB GTIB 3038 +dgm3240 MACH_DGM3240 DGM3240 3039 +atlas_i_lpe MACH_ATLAS_I_LPE ATLAS_I_LPE 3040 +htcmega MACH_HTCMEGA HTCMEGA 3041 +tricorder MACH_TRICORDER TRICORDER 3042 +tx28 MACH_TX28 TX28 3043 +bstbrd MACH_BSTBRD BSTBRD 3044 +pwb3090 MACH_PWB3090 PWB3090 3045 +idea6410 MACH_IDEA6410 IDEA6410 3046 +qbc9263 MACH_QBC9263 QBC9263 3047 +borabora MACH_BORABORA BORABORA 3048 +valdez MACH_VALDEZ VALDEZ 3049 +ls9g20 MACH_LS9G20 LS9G20 3050 +mios_v1 MACH_MIOS_V1 MIOS_V1 3051 +s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052 +controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053 +tin307 MACH_TIN307 TIN307 3054 +tin510 MACH_TIN510 TIN510 3055 +bluecheese MACH_BLUECHEESE BLUECHEESE 3057 +tem3x30 MACH_TEM3X30 TEM3X30 3058 +harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 +msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 +spear900 MACH_SPEAR900 SPEAR900 3061 +pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 |