summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c2
-rw-r--r--arch/arm/mach-omap2/devices.c7
-rw-r--r--arch/arm/mach-tegra/include/mach/kbc.h1
-rw-r--r--arch/arm/mach-u300/Kconfig4
-rw-r--r--arch/arm/mach-u300/core.c14
-rw-r--r--arch/arm/mach-u300/include/mach/gpio-u300.h115
-rw-r--r--arch/arm/mach-u300/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-u300/mmc.c2
-rw-r--r--arch/arm/mach-u300/u300-gpio.h114
-rw-r--r--arch/arm/plat-omap/include/plat/iommu.h31
-rw-r--r--arch/arm/plat-omap/include/plat/iovmm.h12
-rw-r--r--arch/arm/plat-samsung/include/plat/keypad.h27
12 files changed, 169 insertions, 162 deletions
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f8a682f60a4..6b22b543a83 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -127,7 +127,7 @@ static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
size_t retlen;
if (!strcmp(mtd->name, "MAC-Address")) {
- mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
+ mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
if (retlen == ETH_ALEN)
pr_info("Read MAC addr from SPI Flash: %pM\n",
mac_addr);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 35d5dffab7e..46dfd1ae8f7 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -28,6 +28,7 @@
#include <plat/board.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>
+#include <plat/iommu.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
@@ -211,9 +212,15 @@ static struct platform_device omap3isp_device = {
.resource = omap3isp_resources,
};
+static struct omap_iommu_arch_data omap3_isp_iommu = {
+ .name = "isp",
+};
+
int omap3_init_camera(struct isp_platform_data *pdata)
{
omap3isp_device.dev.platform_data = pdata;
+ omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
+
return platform_device_register(&omap3isp_device);
}
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 4f3572a1c68..20bb0545f99 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -53,6 +53,7 @@ struct tegra_kbc_platform_data {
struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
const struct matrix_keymap_data *keymap_data;
+ u32 wakeup_key;
bool wakeup;
bool use_fn_map;
bool use_ghost_filter;
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 1cbcd4fc1e1..54d8f34fdee 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products"
config MACH_U300
bool "U300"
select PINCTRL
- select PINMUX_U300
- select GPIO_U300
+ select PINCTRL_U300
+ select PINCTRL_COH901
comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 697930761b3..b4c6926a700 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1605,15 +1605,15 @@ static struct platform_device pinmux_device = {
};
/* Pinmux settings */
-static struct pinmux_map u300_pinmux_map[] = {
+static struct pinmux_map __initdata u300_pinmux_map[] = {
/* anonymous maps for chip power and EMIFs */
- PINMUX_MAP_PRIMARY_SYS_HOG("POWER", "power"),
- PINMUX_MAP_PRIMARY_SYS_HOG("EMIF0", "emif0"),
- PINMUX_MAP_PRIMARY_SYS_HOG("EMIF1", "emif1"),
+ PINMUX_MAP_SYS_HOG("POWER", "pinmux-u300", "power"),
+ PINMUX_MAP_SYS_HOG("EMIF0", "pinmux-u300", "emif0"),
+ PINMUX_MAP_SYS_HOG("EMIF1", "pinmux-u300", "emif1"),
/* per-device maps for MMC/SD, SPI and UART */
- PINMUX_MAP_PRIMARY("MMCSD", "mmc0", "mmci"),
- PINMUX_MAP_PRIMARY("SPI", "spi0", "pl022"),
- PINMUX_MAP_PRIMARY("UART0", "uart0", "uart0"),
+ PINMUX_MAP("MMCSD", "pinmux-u300", "mmc0", "mmci"),
+ PINMUX_MAP("SPI", "pinmux-u300", "spi0", "pl022"),
+ PINMUX_MAP("UART0", "pinmux-u300", "uart0", "uart0"),
};
struct u300_mux_hog {
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
index 0c2b2021951..bf4c7935aec 100644
--- a/arch/arm/mach-u300/include/mach/gpio-u300.h
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -9,121 +9,6 @@
#ifndef __MACH_U300_GPIO_U300_H
#define __MACH_U300_GPIO_U300_H
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
-#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP 4
-#define U300_GPIO_PIN_CAM_REG_EN 5
-#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
-#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
- defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX 0
-#define U300_GPIO_PIN_UART_TX 1
-#define U300_GPIO_PIN_UART_CTS 2
-#define U300_GPIO_PIN_UART_RTS 3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
-#endif
-
-#endif
-
/**
* enum u300_gpio_variant - the type of U300 GPIO employed
*/
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index db3fbfa1d6e..ee78a26707e 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -110,7 +110,7 @@
#endif
/* Maximum 8*7 GPIO lines */
-#ifdef CONFIG_GPIO_U300
+#ifdef CONFIG_PINCTRL_COH901
#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END)
#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56)
#else
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 4d482aacc27..05abd6ad9fa 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -18,8 +18,8 @@
#include <linux/slab.h>
#include <mach/coh901318.h>
#include <mach/dma_channels.h>
-#include <mach/gpio-u300.h>
+#include "u300-gpio.h"
#include "mmc.h"
static struct mmci_platform_data mmc0_plat_data = {
diff --git a/arch/arm/mach-u300/u300-gpio.h b/arch/arm/mach-u300/u300-gpio.h
new file mode 100644
index 00000000000..847dc25300c
--- /dev/null
+++ b/arch/arm/mach-u300/u300-gpio.h
@@ -0,0 +1,114 @@
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_GPIO02 2 /* Unrouted */
+#define U300_GPIO_PIN_GPIO03 3 /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP 4
+#define U300_GPIO_PIN_CAM_REG_EN 5
+#define U300_GPIO_PIN_GPIO06 6 /* Unrouted */
+#define U300_GPIO_PIN_GPIO07 7 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09 9 /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE 10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE 13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14 14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17 17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18 18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19 19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+ defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX 0
+#define U300_GPIO_PIN_UART_TX 1
+#define U300_GPIO_PIN_UART_CTS 2
+#define U300_GPIO_PIN_UART_RTS 3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY 4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05 5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD 6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07 7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08 8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09 9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10 10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET 11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD 12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY 13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14 14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15 15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16 16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE 17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18 18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19 19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20 20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21 21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22 22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23 23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24 24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25 25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26 26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27 27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28 28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29 29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30 30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31 31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32 32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33 33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34 34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35 35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36 36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37 37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38 38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39 39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40 40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41 41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42 42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43 43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44 44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45 45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46 46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47 47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48 48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49 49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50 50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51 51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52 52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53 53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54 54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55 55 /* Unrouted */
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index a1d79ee1925..88be3e628b3 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -111,6 +111,32 @@ struct iommu_platform_data {
u32 da_end;
};
+/**
+ * struct iommu_arch_data - omap iommu private data
+ * @name: name of the iommu device
+ * @iommu_dev: handle of the iommu device
+ *
+ * This is an omap iommu private data object, which binds an iommu user
+ * to its iommu device. This object should be placed at the iommu user's
+ * dev_archdata so generic IOMMU API can be used without having to
+ * utilize omap-specific plumbing anymore.
+ */
+struct omap_iommu_arch_data {
+ const char *name;
+ struct omap_iommu *iommu_dev;
+};
+
+/**
+ * dev_to_omap_iommu() - retrieves an omap iommu object from a user device
+ * @dev: iommu client device
+ */
+static inline struct omap_iommu *dev_to_omap_iommu(struct device *dev)
+{
+ struct omap_iommu_arch_data *arch_data = dev->archdata.iommu;
+
+ return arch_data->iommu_dev;
+}
+
/* IOMMU errors */
#define OMAP_IOMMU_ERR_TLB_MISS (1 << 0)
#define OMAP_IOMMU_ERR_TRANS_FAULT (1 << 1)
@@ -163,8 +189,8 @@ extern int omap_iommu_set_isr(const char *name,
void *priv),
void *isr_priv);
-extern void omap_iommu_save_ctx(struct omap_iommu *obj);
-extern void omap_iommu_restore_ctx(struct omap_iommu *obj);
+extern void omap_iommu_save_ctx(struct device *dev);
+extern void omap_iommu_restore_ctx(struct device *dev);
extern int omap_install_iommu_arch(const struct iommu_functions *ops);
extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
@@ -176,6 +202,5 @@ extern ssize_t
omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
extern size_t
omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
-struct device *omap_find_iommu_device(const char *name);
#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index 6af1a91c0f3..498e57cda6c 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -72,18 +72,18 @@ struct iovm_struct {
#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
-extern struct iovm_struct *omap_find_iovm_area(struct omap_iommu *obj, u32 da);
+extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
extern u32
-omap_iommu_vmap(struct iommu_domain *domain, struct omap_iommu *obj, u32 da,
+omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
const struct sg_table *sgt, u32 flags);
extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
- struct omap_iommu *obj, u32 da);
+ struct device *dev, u32 da);
extern u32
-omap_iommu_vmalloc(struct iommu_domain *domain, struct omap_iommu *obj,
+omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
u32 da, size_t bytes, u32 flags);
extern void
-omap_iommu_vfree(struct iommu_domain *domain, struct omap_iommu *obj,
+omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
const u32 da);
-extern void *omap_da_to_va(struct omap_iommu *obj, u32 da);
+extern void *omap_da_to_va(struct device *dev, u32 da);
#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
index b59a6483cd8..c81ace332a1 100644
--- a/arch/arm/plat-samsung/include/plat/keypad.h
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -13,32 +13,7 @@
#ifndef __PLAT_SAMSUNG_KEYPAD_H
#define __PLAT_SAMSUNG_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
-
-#define SAMSUNG_MAX_ROWS 8
-#define SAMSUNG_MAX_COLS 8
-
-/**
- * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
- * @keymap_data: pointer to &matrix_keymap_data.
- * @rows: number of keypad row supported.
- * @cols: number of keypad col supported.
- * @no_autorepeat: disable key autorepeat.
- * @wakeup: controls whether the device should be set up as wakeup source.
- * @cfg_gpio: configure the GPIO.
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio.
- */
-struct samsung_keypad_platdata {
- const struct matrix_keymap_data *keymap_data;
- unsigned int rows;
- unsigned int cols;
- bool no_autorepeat;
- bool wakeup;
-
- void (*cfg_gpio)(unsigned int rows, unsigned int cols);
-};
+#include <linux/input/samsung-keypad.h>
/**
* samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 23:48:16 +0000