summaryrefslogtreecommitdiff
path: root/drivers/cdrom/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cdrom/Kconfig')
-rw-r--r--drivers/cdrom/Kconfig213
1 files changed, 0 insertions, 213 deletions
diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb..00000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
- depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
- bool "Support non-SCSI/IDE/ATAPI CDROM drives"
- ---help---
- If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
- here, otherwise N. Read the CD-ROM-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about these CD-ROM drives. If you are unsure what you
- have, say Y and find out whether you have one of the following
- drives.
-
- For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
- exists. Especially in cases where you do not know exactly which kind
- of drive you have you should read there. Most of these drivers use a
- file drivers/cdrom/{driver_name}.h where you can define your
- interface parameters and switch some internal goodies.
-
- To compile these CD-ROM drivers as a module, choose M instead of Y.
-
- If you want to use any of these CD-ROM drivers, you also have to
- answer Y or M to "ISO 9660 CD-ROM file system support" below (this
- answer will get "defaulted" for you if you enable any of the Linux
- CD-ROM drivers).
-
-config AZTCD
- tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is your driver if you have an Aztech CDA268-01A, Orchid
- CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
- CR540 CD-ROM drive. This driver -- just like all these CD-ROM
- drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
- as Aztech CDA269-031SE. Please read the file
- <file:Documentation/cdrom/aztcd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called aztcd.
-
-config GSCD
- tristate "Goldstar R420 CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- If this is your CD-ROM drive, say Y here. As described in the file
- <file:Documentation/cdrom/gscd>, you might have to change a setting
- in the file <file:drivers/cdrom/gscd.h> before compiling the
- kernel. Please read the file <file:Documentation/cdrom/gscd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called gscd.
-
-config SBPCD
- tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- This driver supports most of the drives which use the Panasonic or
- Sound Blaster interface. Please read the file
- <file:Documentation/cdrom/sbpcd>.
-
- The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
- (sometimes labeled "Creative"), the Creative Labs CD200, the
- Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
- model), the TEAC CD-55A fall under this category. Some other
- "electrically compatible" drives (Vertos, Genoa, some Funai models)
- are currently not supported; for the Sanyo H94A drive currently a
- separate driver (asked later) is responsible. Most drives have a
- uniquely shaped faceplate, with a caddyless motorized drawer, but
- without external brand markings. The older CR-52x drives have a
- caddy and manual loading/eject, but still no external markings. The
- driver is able to do an extended auto-probing for interface
- addresses and drive types; this can help to find facts in cases you
- are not sure, but can consume some time during the boot process if
- none of the supported drives gets found. Once your drive got found,
- you should enter the reported parameters into
- <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
- This driver can support up to four CD-ROM controller cards, and each
- card can support up to four CD-ROM drives; if you say Y here, you
- will be asked how many controller cards you have. If compiled as a
- module, only one controller card (but with up to four drives) is
- usable.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sbpcd.
-
-config MCDX
- tristate "Mitsumi CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- Use this driver if you want to be able to use your Mitsumi LU-005,
- FX-001 or FX-001D CD-ROM drive.
-
- Please read the file <file:Documentation/cdrom/mcdx>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called mcdx.
-
-config OPTCD
- tristate "Optics Storage DOLPHIN 8000AT CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
- compatible interface. It also works with the Lasermate CR328A. If
- you have one of those, say Y. This driver does not work for the
- Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
- one. Please read the file <file:Documentation/cdrom/optcd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called optcd.
-
-config CM206
- tristate "Philips/LMS CM206 CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- If you have a Philips/LMS CD-ROM drive cm206 in combination with a
- cm260 host adapter card, say Y here. Please also read the file
- <file:Documentation/cdrom/cm206>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called cm206.
-
-config SJCD
- tristate "Sanyo CDR-H94A CDROM support"
- depends on CD_NO_IDESCSI
- help
- If this is your CD-ROM drive, say Y here and read the file
- <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
- "ISO 9660 CD-ROM file system support" below, because that's the
- file system used on CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sjcd.
-
-config ISP16_CDI
- tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
- depends on CD_NO_IDESCSI
- ---help---
- These are sound cards with built-in cdrom interfaces using the OPTi
- 82C928 or 82C929 chips. Say Y here to have them detected and
- possibly configured at boot time. In addition, You'll have to say Y
- to a driver for the particular cdrom drive you have attached to the
- card. Read <file:Documentation/cdrom/isp16> for details.
-
- To compile this driver as a module, choose M here: the
- module will be called isp16.
-
-config CDU31A
- tristate "Sony CDU31A/CDU33A CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- These CD-ROM drives have a spring-pop-out caddyless drawer, and a
- rectangular green LED centered beneath it. NOTE: these CD-ROM
- drives will not be auto detected by the kernel at boot time; you
- have to provide the interface address as an option to the kernel at
- boot time as described in <file:Documentation/cdrom/cdu31a> or fill
- in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called cdu31a.
-
-config CDU535
- tristate "Sony CDU535 CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
- drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sonycd535.
-
-endmenu