diff options
Diffstat (limited to 'drivers/gpu/mali/mali400ko/driver/src/devicedrv/mali/platform/ux500/mali_platform.c')
-rw-r--r-- | drivers/gpu/mali/mali400ko/driver/src/devicedrv/mali/platform/ux500/mali_platform.c | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/drivers/gpu/mali/mali400ko/driver/src/devicedrv/mali/platform/ux500/mali_platform.c b/drivers/gpu/mali/mali400ko/driver/src/devicedrv/mali/platform/ux500/mali_platform.c new file mode 100644 index 00000000000..481e6e76c54 --- /dev/null +++ b/drivers/gpu/mali/mali400ko/driver/src/devicedrv/mali/platform/ux500/mali_platform.c @@ -0,0 +1,190 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Mali related Ux500 platform initialization + * + * Author: Marta Lofstedt <marta.lofstedt@stericsson.com> for + * ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2. + */ + +/** + * @file mali_platform.c + * Platform specific Mali driver functions for ST-Ericsson's Ux500 platforms + */ +#include "mali_kernel_common.h" +#include "mali_osk.h" +#include "mali_platform.h" + +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/workqueue.h> + +#include <linux/mfd/dbx500-prcmu.h> + +#define MALI_HIGH_TO_LOW_LEVEL_UTILIZATION_LIMIT 64 +#define MALI_LOW_TO_HIGH_LEVEL_UTILIZATION_LIMIT 192 + +static int is_running; +static struct regulator *regulator; +static struct clk *clk_sga; +static u32 last_utilization; +static struct work_struct mali_utilization_work; +static struct workqueue_struct *mali_utilization_workqueue; + +/* Rationale behind the values for: +* MALI_HIGH_LEVEL_UTILIZATION_LIMIT and MALI_LOW_LEVEL_UTILIZATION_LIMIT +* When operating at half clock frequency a faster clock is requested when +* reaching 75% utilization. When operating at full clock frequency a slower +* clock is requested when reaching 25% utilization. There is a margin of 25% +* at the high range of the slow clock to avoid complete saturation of the +* hardware and there is some overlap to avoid an oscillating situation where +* the clock goes back and forth from high to low. +* +* Utilization on full speed clock +* 0 64 128 192 255 +* |---------------|---------------|---------------|---------------| +* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX +* | ^ +* V | +* XXXXXXXXXXXXXXXXXXXXXXXXX +* 0 64 128 192 255 +* |-------|-------|-------|-------| +* Utilization on half speed clock +*/ +void mali_utilization_function(struct work_struct *ptr) +{ + /*By default, platform start with 50% APE OPP and 25% DDR OPP*/ + static u32 has_requested_low = 1; + + if (last_utilization > MALI_LOW_TO_HIGH_LEVEL_UTILIZATION_LIMIT) { + if (has_requested_low) { + MALI_DEBUG_PRINT(5, ("MALI GPU utilization: %u SIGNAL_HIGH\n", last_utilization)); + /*Request 100% APE_OPP.*/ + if (prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP, "mali", 100)) { + MALI_DEBUG_PRINT(2, ("MALI 100% APE_OPP failed\n")); + return; + } + /* + * Since the utilization values will be reported higher + * if DDR_OPP is lowered, we also request 100% DDR_OPP. + */ + if (prcmu_qos_add_requirement(PRCMU_QOS_DDR_OPP, "mali", 100)) { + MALI_DEBUG_PRINT(2, ("MALI 100% DDR_OPP failed\n")); + return; + } + has_requested_low = 0; + } + } else { + if (last_utilization < MALI_HIGH_TO_LOW_LEVEL_UTILIZATION_LIMIT) { + if (!has_requested_low) { + /*Remove APE_OPP and DDR_OPP requests*/ + prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP, "mali"); + prcmu_qos_remove_requirement(PRCMU_QOS_DDR_OPP, "mali"); + MALI_DEBUG_PRINT(5, ("MALI GPU utilization: %u SIGNAL_LOW\n", last_utilization)); + has_requested_low = 1; + } + } + } + MALI_DEBUG_PRINT(5, ("MALI GPU utilization: %u\n", last_utilization)); +} + +_mali_osk_errcode_t mali_platform_init(_mali_osk_resource_t *resource) +{ + is_running = 0; + last_utilization = 0; + + mali_utilization_workqueue = create_singlethread_workqueue("mali_utilization_workqueue"); + if (NULL == mali_utilization_workqueue) { + MALI_DEBUG_PRINT(2, ("%s: Failed to setup workqueue %s\n", __func__, "v-mali")); + goto error; + } + INIT_WORK(&mali_utilization_work, mali_utilization_function); + + regulator = regulator_get(NULL, "v-mali"); + if (IS_ERR(regulator)) { + MALI_DEBUG_PRINT(2, ("%s: Failed to get regulator %s\n", __func__, "v-mali")); + goto error; + } + + clk_sga = clk_get_sys("mali", NULL); + if (IS_ERR(clk_sga)) { + regulator_put(regulator); + MALI_DEBUG_PRINT(2, ("%s: Failed to get clock %s\n", __func__, "mali")); + goto error; + } + + MALI_SUCCESS; +error: + MALI_DEBUG_PRINT(1, ("SGA initialization failed.\n")); + MALI_ERROR(_MALI_OSK_ERR_FAULT); +} + +_mali_osk_errcode_t mali_platform_deinit(_mali_osk_resource_type_t *type) +{ + destroy_workqueue(mali_utilization_workqueue); + regulator_put(regulator); + clk_put(clk_sga); + MALI_DEBUG_PRINT(2, ("SGA terminated.\n")); + MALI_SUCCESS; +} + +_mali_osk_errcode_t mali_platform_powerdown(u32 cores) +{ + if (is_running) { + clk_disable(clk_sga); + if (regulator) { + int ret = regulator_disable(regulator); + if (ret < 0) { + MALI_DEBUG_PRINT(2, ("%s: Failed to disable regulator %s\n", __func__, "v-mali")); + is_running = 0; + MALI_ERROR(_MALI_OSK_ERR_FAULT); + } + } + is_running = 0; + } + MALI_DEBUG_PRINT(4, ("mali_platform_powerdown is_running: %u cores: %u\n", is_running, cores)); + MALI_SUCCESS; +} + +_mali_osk_errcode_t mali_platform_powerup(u32 cores) +{ + if (!is_running) { + int ret = regulator_enable(regulator); + if (ret < 0) { + MALI_DEBUG_PRINT(2, ("%s: Failed to enable regulator %s\n", __func__, "v-mali")); + goto error; + } + + ret = clk_enable(clk_sga); + if (ret < 0) { + regulator_disable(regulator); + MALI_DEBUG_PRINT(2, ("%s: Failed to enable clock %s\n", __func__, "mali")); + goto error; + } + is_running = 1; + } + MALI_DEBUG_PRINT(4, ("mali_platform_powerup is_running:%u cores: %u\n", is_running, cores)); + MALI_SUCCESS; +error: + MALI_DEBUG_PRINT(1, ("Failed to power up.\n")); + MALI_ERROR(_MALI_OSK_ERR_FAULT); +} + +void mali_gpu_utilization_handler(u32 utilization) +{ + last_utilization = utilization; + /* + * We should not cancel the potentially not yet run old work + * in favor of a new work. + * Since the utilization value will change, + * the mali_utilization_function will evaluate based on + * what is the utilization now and not on what it was + * when it was scheduled. + */ + queue_work(mali_utilization_workqueue, &mali_utilization_work); +} + + |