diff options
Diffstat (limited to 'drivers/ide')
| -rw-r--r-- | drivers/ide/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/ide/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ide/ide-acpi.c | 696 | ||||
| -rw-r--r-- | drivers/ide/ide-probe.c | 3 | ||||
| -rw-r--r-- | drivers/ide/ide.c | 36 |
5 files changed, 743 insertions, 0 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 0e511ca50b8..ec03341d2bd 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -271,6 +271,13 @@ config BLK_DEV_IDESCSI If both this SCSI emulation and native ATAPI support are compiled into the kernel, the native support will be used. +config BLK_DEV_IDEACPI + bool "IDE ACPI support" + depends on ACPI + ---help--- + Implement ACPI support for generic IDE devices. On modern + machines ACPI support is required to properly handle ACPI S3 states. + config IDE_TASK_IOCTL bool "IDE Taskfile Access" help diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 569fae71750..d9f029e8ff7 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -22,6 +22,7 @@ ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_PROC_FS) += ide-proc.o ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o +ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o # built-in only drivers from arm/ ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c new file mode 100644 index 00000000000..1eb734951dc --- /dev/null +++ b/drivers/ide/ide-acpi.c @@ -0,0 +1,696 @@ +/* + * ide-acpi.c + * Provides ACPI support for IDE drives. + * + * Copyright (C) 2005 Intel Corp. + * Copyright (C) 2005 Randy Dunlap + * Copyright (C) 2006 SUSE Linux Products GmbH + * Copyright (C) 2006 Hannes Reinecke + */ + +#include <linux/ata.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <acpi/acpi.h> +#include <linux/ide.h> +#include <linux/pci.h> + +#include <acpi/acpi_bus.h> +#include <acpi/acnames.h> +#include <acpi/acnamesp.h> +#include <acpi/acparser.h> +#include <acpi/acexcep.h> +#include <acpi/acmacros.h> +#include <acpi/actypes.h> + +#define REGS_PER_GTF 7 +struct taskfile_array { + u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */ +}; + +struct GTM_buffer { + u32 PIO_speed0; + u32 DMA_speed0; + u32 PIO_speed1; + u32 DMA_speed1; + u32 GTM_flags; +}; + +struct ide_acpi_drive_link { + ide_drive_t *drive; + acpi_handle obj_handle; + u8 idbuff[512]; +}; + +struct ide_acpi_hwif_link { + ide_hwif_t *hwif; + acpi_handle obj_handle; + struct GTM_buffer gtm; + struct ide_acpi_drive_link master; + struct ide_acpi_drive_link slave; +}; + +#undef DEBUGGING +/* note: adds function name and KERN_DEBUG */ +#ifdef DEBUGGING +#define DEBPRINT(fmt, args...) \ + printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args) +#else +#define DEBPRINT(fmt, args...) do {} while (0) +#endif /* DEBUGGING */ + +extern int ide_noacpi; +extern int ide_noacpitfs; +extern int ide_noacpionboot; + +/** + * ide_get_dev_handle - finds acpi_handle and PCI device.function + * @dev: device to locate + * @handle: returned acpi_handle for @dev + * @pcidevfn: return PCI device.func for @dev + * + * Returns the ACPI object handle to the corresponding PCI device. + * + * Returns 0 on success, <0 on error. + */ +static int ide_get_dev_handle(struct device *dev, acpi_handle *handle, + acpi_integer *pcidevfn) +{ + struct pci_dev *pdev = to_pci_dev(dev); + unsigned int bus, devnum, func; + acpi_integer addr; + acpi_handle dev_handle; + struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER, + .pointer = NULL}; + acpi_status status; + struct acpi_device_info *dinfo = NULL; + int ret = -ENODEV; + + bus = pdev->bus->number; + devnum = PCI_SLOT(pdev->devfn); + func = PCI_FUNC(pdev->devfn); + /* ACPI _ADR encoding for PCI bus: */ + addr = (acpi_integer)(devnum << 16 | func); + + DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func); + + dev_handle = DEVICE_ACPI_HANDLE(dev); + if (!dev_handle) { + DEBPRINT("no acpi handle for device\n"); + goto err; + } + + status = acpi_get_object_info(dev_handle, &buffer); + if (ACPI_FAILURE(status)) { + DEBPRINT("get_object_info for device failed\n"); + goto err; + } + dinfo = buffer.pointer; + if (dinfo && (dinfo->valid & ACPI_VALID_ADR) && + dinfo->address == addr) { + *pcidevfn = addr; + *handle = dev_handle; + } else { + DEBPRINT("get_object_info for device has wrong " + " address: %llu, should be %u\n", + dinfo ? (unsigned long long)dinfo->address : -1ULL, + (unsigned int)addr); + goto err; + } + + DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n", + devnum, func, (unsigned long long)addr, *handle); + ret = 0; +err: + kfree(dinfo); + return ret; +} + +/** + * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif + * @hwif: device to locate + * + * Retrieves the object handle for a given hwif. + * + * Returns handle on success, 0 on error. + */ +static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) +{ + struct device *dev = hwif->gendev.parent; + acpi_handle dev_handle; + acpi_integer pcidevfn; + acpi_handle chan_handle; + int err; + + DEBPRINT("ENTER: device %s\n", hwif->name); + + if (!dev) { + DEBPRINT("no PCI device for %s\n", hwif->name); + return NULL; + } + + err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn); + if (err < 0) { + DEBPRINT("ide_get_dev_handle failed (%d)\n", err); + return NULL; + } + + /* get child objects of dev_handle == channel objects, + * + _their_ children == drive objects */ + /* channel is hwif->channel */ + chan_handle = acpi_get_child(dev_handle, hwif->channel); + DEBPRINT("chan adr=%d: handle=0x%p\n", + hwif->channel, chan_handle); + + return chan_handle; +} + +/** + * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive + * @drive: device to locate + * + * Retrieves the object handle of a given drive. According to the ACPI + * spec the drive is a child of the hwif. + * + * Returns handle on success, 0 on error. + */ +static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + int port; + acpi_handle drive_handle; + + if (!hwif->acpidata) + return NULL; + + if (!hwif->acpidata->obj_handle) + return NULL; + + port = hwif->channel ? drive->dn - 2: drive->dn; + + DEBPRINT("ENTER: %s at channel#: %d port#: %d\n", + drive->name, hwif->channel, port); + + + /* TBD: could also check ACPI object VALID bits */ + drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port); + DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle); + + return drive_handle; +} + +/** + * do_drive_get_GTF - get the drive bootup default taskfile settings + * @drive: the drive for which the taskfile settings should be retrieved + * @gtf_length: number of bytes of _GTF data returned at @gtf_address + * @gtf_address: buffer containing _GTF taskfile arrays + * + * The _GTF method has no input parameters. + * It returns a variable number of register set values (registers + * hex 1F1..1F7, taskfiles). + * The <variable number> is not known in advance, so have ACPI-CA + * allocate the buffer as needed and return it, then free it later. + * + * The returned @gtf_length and @gtf_address are only valid if the + * function return value is 0. + */ +static int do_drive_get_GTF(ide_drive_t *drive, + unsigned int *gtf_length, unsigned long *gtf_address, + unsigned long *obj_loc) +{ + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + ide_hwif_t *hwif = HWIF(drive); + struct device *dev = hwif->gendev.parent; + int err = -ENODEV; + int port; + + *gtf_length = 0; + *gtf_address = 0UL; + *obj_loc = 0UL; + + if (ide_noacpi) + return 0; + + if (!dev) { + DEBPRINT("no PCI device for %s\n", hwif->name); + goto out; + } + + if (!hwif->acpidata) { + DEBPRINT("no ACPI data for %s\n", hwif->name); + goto out; + } + + port = hwif->channel ? drive->dn - 2: drive->dn; + + if (!drive->acpidata) { + if (port == 0) { + drive->acpidata = &hwif->acpidata->master; + hwif->acpidata->master.drive = drive; + } else { + drive->acpidata = &hwif->acpidata->slave; + hwif->acpidata->slave.drive = drive; + } + } + + DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", + hwif->name, dev->bus_id, port, hwif->channel); + + if (!drive->present) { + DEBPRINT("%s drive %d:%d not present\n", + hwif->name, hwif->channel, port); + goto out; + } + + /* Get this drive's _ADR info. if not already known. */ + if (!drive->acpidata->obj_handle) { + drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive); + if (!drive->acpidata->obj_handle) { + DEBPRINT("No ACPI object found for %s\n", + drive->name); + goto out; + } + } + + /* Setting up output buffer */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTF has no input parameters */ + err = -EIO; + status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF", + NULL, &output); + if (ACPI_FAILURE(status)) { + printk(KERN_DEBUG + "%s: Run _GTF error: status = 0x%x\n", + __FUNCTION__, status); + goto out; + } + + if (!output.length || !output.pointer) { + DEBPRINT("Run _GTF: " + "length or ptr is NULL (0x%llx, 0x%p)\n", + (unsigned long long)output.length, + output.pointer); + goto out; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + DEBPRINT("Run _GTF: error: " + "expected object type of ACPI_TYPE_BUFFER, " + "got 0x%x\n", out_obj->type); + err = -ENOENT; + kfree(output.pointer); + goto out; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length % REGS_PER_GTF) { + printk(KERN_ERR + "%s: unexpected GTF length (%d) or addr (0x%p)\n", + __FUNCTION__, out_obj->buffer.length, + out_obj->buffer.pointer); + err = -ENOENT; + kfree(output.pointer); + goto out; + } + + *gtf_length = out_obj->buffer.length; + *gtf_address = (unsigned long)out_obj->buffer.pointer; + *obj_loc = (unsigned long)out_obj; + DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n", + *gtf_length, *gtf_address, *obj_loc); + err = 0; +out: + return err; +} + +/** + * taskfile_load_raw - send taskfile registers to drive + * @drive: drive to which output is sent + * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) + * + * Outputs IDE taskfile to the drive. + */ +static int taskfile_load_raw(ide_drive_t *drive, + const struct taskfile_array *gtf) +{ + ide_task_t args; + int err = 0; + + DEBPRINT("(0x1f1-1f7): hex: " + "%02x %02x %02x %02x %02x %02x %02x\n", + gtf->tfa[0], gtf->tfa[1], gtf->tfa[2], + gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); + + memset(&args, 0, sizeof(ide_task_t)); + args.command_type = IDE_DRIVE_TASK_NO_DATA; + args.data_phase = TASKFILE_IN; + args.handler = &task_no_data_intr; + + /* convert gtf to IDE Taskfile */ + args.tfRegister[1] = gtf->tfa[0]; /* 0x1f1 */ + args.tfRegister[2] = gtf->tfa[1]; /* 0x1f2 */ + args.tfRegister[3] = gtf->tfa[2]; /* 0x1f3 */ + args.tfRegister[4] = gtf->tfa[3]; /* 0x1f4 */ + args.tfRegister[5] = gtf->tfa[4]; /* 0x1f5 */ + args.tfRegister[6] = gtf->tfa[5]; /* 0x1f6 */ + args.tfRegister[7] = gtf->tfa[6]; /* 0x1f7 */ + + if (ide_noacpitfs) { + DEBPRINT("_GTF execution disabled\n"); + return err; + } + + err = ide_raw_taskfile(drive, &args, NULL); + if (err) + printk(KERN_ERR "%s: ide_raw_taskfile failed: %u\n", + __FUNCTION__, err); + + return err; +} + +/** + * do_drive_set_taskfiles - write the drive taskfile settings from _GTF + * @drive: the drive to which the taskfile command should be sent + * @gtf_length: total number of bytes of _GTF taskfiles + * @gtf_address: location of _GTF taskfile arrays + * + * Write {gtf_address, length gtf_length} in groups of + * REGS_PER_GTF bytes. + */ +static int do_drive_set_taskfiles(ide_drive_t *drive, + unsigned int gtf_length, + unsigned long gtf_address) +{ + int rc = -ENODEV, err; + int gtf_count = gtf_length / REGS_PER_GTF; + int ix; + struct taskfile_array *gtf; + + if (ide_noacpi) + return 0; + + DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn); + + if (!drive->present) + goto out; + if (!gtf_count) /* shouldn't be here */ + goto out; + + DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n", + gtf_length, gtf_length, gtf_count, gtf_address); + + if (gtf_length % REGS_PER_GTF) { + printk(KERN_ERR "%s: unexpected GTF length (%d)\n", + __FUNCTION__, gtf_length); + goto out; + } + + rc = 0; + for (ix = 0; ix < gtf_count; ix++) { + gtf = (struct taskfile_array *) + (gtf_address + ix * REGS_PER_GTF); + + /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */ + err = taskfile_load_raw(drive, gtf); + if (err) + rc = err; + } + +out: + return rc; +} + +/** + * ide_acpi_exec_tfs - get then write drive taskfile settings + * @drive: the drive for which the taskfile settings should be + * written. + * + * According to the ACPI spec this should be called after _STM + * has been evaluated for the interface. Some ACPI vendors interpret + * that as a hard requirement and modify the taskfile according + * to the Identify Drive information passed down with _STM. + * So one should really make sure to call this only after _STM has + * been executed. + */ +int ide_acpi_exec_tfs(ide_drive_t *drive) +{ + int ret; + unsigned int gtf_length; + unsigned long gtf_address; + unsigned long obj_loc; + + if (ide_noacpi) + return 0; + + DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn); + + ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc); + if (ret < 0) { + DEBPRINT("get_GTF error (%d)\n", ret); + return ret; + } + + DEBPRINT("call set_taskfiles, drive=%s\n", drive->name); + + ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address); + kfree((void *)obj_loc); + if (ret < 0) { + DEBPRINT("set_taskfiles error (%d)\n", ret); + } + + DEBPRINT("ret=%d\n", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs); + +/** + * ide_acpi_get_timing - get the channel (controller) timings + * @hwif: target IDE interface (channel) + * + * This function executes the _GTM ACPI method for the target channel. + * + */ +void ide_acpi_get_timing(ide_hwif_t *hwif) +{ + acpi_status status; + struct acpi_buffer output; + union acpi_object *out_obj; + + if (ide_noacpi) + return; + + DEBPRINT("ENTER:\n"); + + if (!hwif->acpidata) { + DEBPRINT("no ACPI data for %s\n", hwif->name); + return; + } + + /* Setting up output buffer for _GTM */ + output.length = ACPI_ALLOCATE_BUFFER; + output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ + + /* _GTM has no input parameters */ + status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM", + NULL, &output); + + DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n", + status, output.pointer, + (unsigned long long)output.length); + + if (ACPI_FAILURE(status)) { + DEBPRINT("Run _GTM error: status = 0x%x\n", status); + return; + } + + if (!output.length || !output.pointer) { + DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n", + (unsigned long long)output.length, + output.pointer); + kfree(output.pointer); + return; + } + + out_obj = output.pointer; + if (out_obj->type != ACPI_TYPE_BUFFER) { + kfree(output.pointer); + DEBPRINT("Run _GTM: error: " + "expected object type of ACPI_TYPE_BUFFER, " + "got 0x%x\n", out_obj->type); + return; + } + + if (!out_obj->buffer.length || !out_obj->buffer.pointer || + out_obj->buffer.length != sizeof(struct GTM_buffer)) { + kfree(output.pointer); + printk(KERN_ERR + "%s: unexpected _GTM length (0x%x)[should be 0x%x] or addr (0x%p)\n", + __FUNCTION__, out_obj->buffer.length, + sizeof(struct GTM_buffer), out_obj->buffer.pointer); + return; + } + + memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer, + sizeof(struct GTM_buffer)); + + DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n", + out_obj->buffer.pointer, out_obj->buffer.length, + sizeof(struct GTM_buffer)); + + DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", + hwif->acpidata->gtm.PIO_speed0, + hwif->acpidata->gtm.DMA_speed0, + hwif->acpidata->gtm.PIO_speed1, + hwif->acpidata->gtm.DMA_speed1, + hwif->acpidata->gtm.GTM_flags); + + kfree(output.pointer); +} +EXPORT_SYMBOL_GPL(ide_acpi_get_timing); + +/** + * ide_acpi_push_timing - set the channel (controller) timings + * @hwif: target IDE interface (channel) + * + * This function executes the _STM ACPI method for the target channel. + * + * _STM requires Identify Drive data, which has to passed as an argument. + * Unfortunately hd_driveid is a mangled version which we can't readily + * use; hence we'll get the information afresh. + */ +void ide_acpi_push_timing(ide_hwif_t *hwif) +{ + acpi_status status; + struct acpi_object_list input; + union acpi_object in_params[3]; + struct ide_acpi_drive_link *master = &hwif->acpidata->master; + struct ide_acpi_drive_link *slave = &hwif->acpidata->slave; + + if (ide_noacpi) + return; + + DEBPRINT("ENTER:\n"); + + if (!hwif->acpidata) { + DEBPRINT("no ACPI data for %s\n", hwif->name); + return; + } + + /* Give the GTM buffer + drive Identify data to the channel via the + * _STM method: */ + /* setup input parameters buffer for _STM */ + input.count = 3; + input.pointer = in_params; + in_params[0].type = ACPI_TYPE_BUFFER; + in_params[0].buffer.length = sizeof(struct GTM_buffer); + in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm; + in_params[1].type = ACPI_TYPE_BUFFER; + in_params[1].buffer.length = sizeof(struct hd_driveid); + in_params[1].buffer.pointer = (u8 *)&master->idbuff; + in_params[2].type = ACPI_TYPE_BUFFER; + in_params[2].buffer.length = sizeof(struct hd_driveid); + in_params[2].buffer.pointer = (u8 *)&slave->idbuff; + /* Output buffer: _STM has no output */ + + status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM", + &input, NULL); + + if (ACPI_FAILURE(status)) { + DEBPRINT("Run _STM error: status = 0x%x\n", status); + } + DEBPRINT("_STM status: %d\n", status); +} +EXPORT_SYMBOL_GPL(ide_acpi_push_timing); + +/** + * ide_acpi_init - initialize the ACPI link for an IDE interface + * @hwif: target IDE interface (channel) + * + * The ACPI spec is not quite clear when the drive identify buffer + * should be obtained. Calling IDENTIFY DEVICE during shutdown + * is not the best of ideas as the drive might already being put to + * sleep. And obviously we can't call it during resume. + * So we get the information during startup; but this means that + * any changes during run-time will be lost after resume. + */ +void ide_acpi_init(ide_hwif_t *hwif) +{ + int unit; + int err; + struct ide_acpi_drive_link *master; + struct ide_acpi_drive_link *slave; + + hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); + if (!hwif->acpidata) + return; + + hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif); + if (!hwif->acpidata->obj_handle) { + DEBPRINT("no ACPI object for %s found\n", hwif->name); + kfree(hwif->acpidata); + hwif->acpidata = NULL; + return; + } + + /* + * The ACPI spec mandates that we send information + * for both drives, regardless whether they are connected + * or not. + */ + hwif->acpidata->master.drive = &hwif->drives[0]; + hwif->drives[0].acpidata = &hwif->acpidata->master; + master = &hwif->acpidata->master; + + hwif->acpidata->slave.drive = &hwif->drives[1]; + hwif->drives[1].acpidata = &hwif->acpidata->slave; + slave = &hwif->acpidata->slave; + + + /* + * Send IDENTIFY for each drive + */ + if (master->drive->present) { + err = taskfile_lib_get_identify(master->drive, master->idbuff); + if (err) { + DEBPRINT("identify device %s failed (%d)\n", + master->drive->name, err); + } + } + + if (slave->drive->present) { + err = taskfile_lib_get_identify(slave->drive, slave->idbuff); + if (err) { + DEBPRINT("identify device %s failed (%d)\n", + slave->drive->name, err); + } + } + + if (ide_noacpionboot) { + DEBPRINT("ACPI methods disabled on boot\n"); + return; + } + + /* + * ACPI requires us to call _STM on startup + */ + ide_acpi_get_timing(hwif); + ide_acpi_push_timing(hwif); + + for (unit = 0; unit < MAX_DRIVES; ++unit) { + ide_drive_t *drive = &hwif->drives[unit]; + + if (drive->present) { + /* Execute ACPI startup code */ + ide_acpi_exec_tfs(drive); + } + } +} +EXPORT_SYMBOL_GPL(ide_acpi_init); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 5a5c565a32a..176bbc850d6 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1384,6 +1384,9 @@ static int hwif_init(ide_hwif_t *hwif) done: init_gendisk(hwif); + + ide_acpi_init(hwif); + hwif->present = 1; /* success */ return 1; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 6c9bd5165bd..c750f6ce770 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -187,6 +187,12 @@ int noautodma = 1; EXPORT_SYMBOL(noautodma); +#ifdef CONFIG_BLK_DEV_IDEACPI +int ide_noacpi = 0; +int ide_noacpitfs = 1; +int ide_noacpionboot = 1; +#endif + /* * This is declared extern in ide.h, for access by other IDE modules: */ @@ -1214,10 +1220,15 @@ EXPORT_SYMBOL(system_bus_clock); static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; + ide_hwif_t *hwif = HWIF(drive); struct request rq; struct request_pm_state rqpm; ide_task_t args; + /* Call ACPI _GTM only once */ + if (!(drive->dn % 2)) + ide_acpi_get_timing(hwif); + memset(&rq, 0, sizeof(rq)); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); @@ -1235,10 +1246,17 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) static int generic_ide_resume(struct device *dev) { ide_drive_t *drive = dev->driver_data; + ide_hwif_t *hwif = HWIF(drive); struct request rq; struct request_pm_state rqpm; ide_task_t args; + /* Call ACPI _STM only once */ + if (!(drive->dn % 2)) + ide_acpi_push_timing(hwif); + + ide_acpi_exec_tfs(drive); + memset(&rq, 0, sizeof(rq)); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); @@ -1543,6 +1561,24 @@ static int __init ide_setup(char *s) } #endif /* CONFIG_BLK_DEV_IDEPCI */ +#ifdef CONFIG_BLK_DEV_IDEACPI + if (!strcmp(s, "ide=noacpi")) { + //printk(" : Disable IDE ACPI support.\n"); + ide_noacpi = 1; + return 1; + } + if (!strcmp(s, "ide=acpigtf")) { + //printk(" : Enable IDE ACPI _GTF support.\n"); + ide_noacpitfs = 0; + return 1; + } + if (!strcmp(s, "ide=acpionboot")) { + //printk(" : Call IDE ACPI methods on boot.\n"); + ide_noacpionboot = 0; + return 1; + } +#endif /* CONFIG_BLK_DEV_IDEACPI */ + /* * Look for drive options: "hdx=" */ |