diff options
Diffstat (limited to 'drivers/input/keyboard/db5500_keypad.c')
-rw-r--r-- | drivers/input/keyboard/db5500_keypad.c | 799 |
1 files changed, 799 insertions, 0 deletions
diff --git a/drivers/input/keyboard/db5500_keypad.c b/drivers/input/keyboard/db5500_keypad.c new file mode 100644 index 00000000000..729775d99e8 --- /dev/null +++ b/drivers/input/keyboard/db5500_keypad.c @@ -0,0 +1,799 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson + */ + +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <mach/db5500-keypad.h> +#include <linux/regulator/consumer.h> + +#define KEYPAD_CTR 0x0 +#define KEYPAD_IRQ_CLEAR 0x4 +#define KEYPAD_INT_ENABLE 0x8 +#define KEYPAD_INT_STATUS 0xC +#define KEYPAD_ARRAY_01 0x18 + +#define KEYPAD_NUM_ARRAY_REGS 5 + +#define KEYPAD_CTR_WRITE_IRQ_ENABLE (1 << 10) +#define KEYPAD_CTR_WRITE_CONTROL (1 << 8) +#define KEYPAD_CTR_SCAN_ENABLE (1 << 7) + +#define KEYPAD_ARRAY_CHANGEBIT (1 << 15) + +#define KEYPAD_DEBOUNCE_PERIOD_MIN 5 /* ms */ +#define KEYPAD_DEBOUNCE_PERIOD_MAX 80 /* ms */ + +#define KEYPAD_GND_ROW 8 + +#define KEYPAD_ROW_SHIFT 3 +#define KEYPAD_KEYMAP_SIZE \ + (KEYPAD_MAX_ROWS * KEYPAD_MAX_COLS) + +#define KEY_PRESSED_DELAY 10 +/** + * struct db5500_keypad - data structure used by keypad driver + * @irq: irq number + * @base: keypad registers base address + * @input: pointer to input device object + * @board: keypad platform data + * @keymap: matrix scan code table for keycodes + * @clk: clock structure pointer + * @regulator : regulator used by keypad + * @switch_work : delayed work variable for switching to gpio + * @gpio_work : delayed work variable for reporting key event in gpio mode + * @previous_set: previous set of registers + * @enable : flag to enable the driver event + * @enable_on_resume: set if keypad should be enabled on resume + * @valid_key : hold the state of valid key press + * @db5500_rows : rows gpio array for db5500 keypad + * @db5500_cols : cols gpio array for db5500 keypad + * @gpio_input_irq : array for gpio irqs + * @gpio_row : gpio row + * @gpio_col : gpio_col + */ +struct db5500_keypad { + int irq; + void __iomem *base; + struct input_dev *input; + const struct db5500_keypad_platform_data *board; + unsigned short keymap[KEYPAD_KEYMAP_SIZE]; + struct clk *clk; + struct regulator *regulator; + struct delayed_work switch_work; + struct delayed_work gpio_work; + u8 previous_set[KEYPAD_MAX_ROWS]; + bool enable; + bool enable_on_resume; + bool valid_key; + int db5500_rows[KEYPAD_MAX_ROWS]; + int db5500_cols[KEYPAD_MAX_COLS]; + int gpio_input_irq[KEYPAD_MAX_ROWS]; + int gpio_row; + int gpio_col; +}; + +/** + * db5500_keypad_report() - reports the keypad event + * @keypad: pointer to device structure + * @row: row value of keypad + * @curr: current event + * @previous: previous event + * + * This function uses to reports the event of the keypad + * and returns NONE. + * + * By default all column reads are 1111 1111b. Any press will pull the column + * down, leading to a 0 in any of these locations. We invert these values so + * that a 1 means means "column pressed". * + * If curr changes from the previous from 0 to 1, we report it as a key press. + * If curr changes from the previous from 1 to 0, we report it as a key + * release. + */ +static void db5500_keypad_report(struct db5500_keypad *keypad, int row, + u8 curr, u8 previous) +{ + struct input_dev *input = keypad->input; + u8 changed = curr ^ previous; + + while (changed) { + int col = __ffs(changed); + bool press = curr & BIT(col); + int code = MATRIX_SCAN_CODE(row, col, KEYPAD_ROW_SHIFT); + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], press); + input_sync(input); + + changed &= ~BIT(col); + } +} + +static void db5500_keypad_scan(struct db5500_keypad *keypad) +{ + u8 current_set[ARRAY_SIZE(keypad->previous_set)]; + int tries = 100; + bool changebit; + u32 data_reg; + u8 allrows; + u8 common; + int i; + + writel(0x1, keypad->base + KEYPAD_IRQ_CLEAR); + +again: + if (!tries--) { + dev_warn(&keypad->input->dev, "values failed to stabilize\n"); + return; + } + + changebit = readl(keypad->base + KEYPAD_ARRAY_01) + & KEYPAD_ARRAY_CHANGEBIT; + + for (i = 0; i < KEYPAD_NUM_ARRAY_REGS; i++) { + data_reg = readl(keypad->base + KEYPAD_ARRAY_01 + 4 * i); + + /* If the change bit changed, we need to reread the data */ + if (changebit != !!(data_reg & KEYPAD_ARRAY_CHANGEBIT)) + goto again; + + current_set[2 * i] = ~(data_reg & 0xff); + + /* Last array reg has only one valid set of columns */ + if (i != KEYPAD_NUM_ARRAY_REGS - 1) + current_set[2 * i + 1] = ~((data_reg & 0xff0000) >> 16); + } + + allrows = current_set[KEYPAD_GND_ROW]; + + /* + * Sometimes during a GND row release, an incorrect report is received + * where the ARRAY8 all rows setting does not match the other ARRAY* + * rows. Ignore this report; the correct one has been observed to + * follow it. + */ + common = 0xff; + for (i = 0; i < KEYPAD_GND_ROW; i++) + common &= current_set[i]; + + if ((allrows & common) != common) + return; + + for (i = 0; i < ARRAY_SIZE(current_set); i++) { + /* + * If there is an allrows press (GND row), we need to ignore + * the allrows values from the reset of the ARRAYs. + */ + if (i < KEYPAD_GND_ROW && allrows) + current_set[i] &= ~allrows; + + if (keypad->previous_set[i] == current_set[i]) + continue; + + db5500_keypad_report(keypad, i, current_set[i], + keypad->previous_set[i]); + } + + /* update the reference set of array registers */ + memcpy(keypad->previous_set, current_set, sizeof(keypad->previous_set)); + + return; +} + +/** + * db5500_keypad_writel() - write into keypad registers + * @keypad: pointer to device structure + * @val: value to write into register + * @reg: register offset + * + * This function uses to write into the keypad registers + * and returns NONE. + */ +static void db5500_keypad_writel(struct db5500_keypad *keypad, u32 val, u32 reg) +{ + int timeout = 4; + int allowedbit; + + switch (reg) { + case KEYPAD_CTR: + allowedbit = KEYPAD_CTR_WRITE_CONTROL; + break; + case KEYPAD_INT_ENABLE: + allowedbit = KEYPAD_CTR_WRITE_IRQ_ENABLE; + break; + default: + BUG(); + } + + do { + u32 ctr = readl(keypad->base + KEYPAD_CTR); + + if (ctr & allowedbit) + break; + + udelay(50); + } while (--timeout); + + /* Five 32k clk cycles (~150us) required, we waited 200us */ + WARN_ON(!timeout); + + writel(val, keypad->base + reg); +} + +/** + * db5500_keypad_chip_init() - initialize the keypad chip + * @keypad: pointer to device structure + * + * This function uses to initializes the keypad controller + * and returns integer. + */ +static int db5500_keypad_chip_init(struct db5500_keypad *keypad) +{ + int debounce = keypad->board->debounce_ms; + int debounce_hits = 0; + + if (debounce < KEYPAD_DEBOUNCE_PERIOD_MIN) + debounce = KEYPAD_DEBOUNCE_PERIOD_MIN; + + if (debounce > KEYPAD_DEBOUNCE_PERIOD_MAX) { + debounce_hits = DIV_ROUND_UP(debounce, + KEYPAD_DEBOUNCE_PERIOD_MAX) - 1; + debounce = KEYPAD_DEBOUNCE_PERIOD_MAX; + } + + /* Convert the milliseconds to the bit mask */ + debounce = DIV_ROUND_UP(debounce, KEYPAD_DEBOUNCE_PERIOD_MIN) - 1; + + clk_enable(keypad->clk); + + db5500_keypad_writel(keypad, + KEYPAD_CTR_SCAN_ENABLE + | ((debounce_hits & 0x7) << 4) + | debounce, + KEYPAD_CTR); + + db5500_keypad_writel(keypad, 0x1, KEYPAD_INT_ENABLE); + + return 0; +} + +static void db5500_mode_enable(struct db5500_keypad *keypad, bool enable) +{ + int i; + + if (!enable) { + db5500_keypad_writel(keypad, 0, KEYPAD_CTR); + db5500_keypad_writel(keypad, 0, KEYPAD_INT_ENABLE); + if (keypad->board->exit) + keypad->board->exit(); + for (i = 0; i < keypad->board->krow; i++) { + enable_irq(keypad->gpio_input_irq[i]); + enable_irq_wake(keypad->gpio_input_irq[i]); + } + clk_disable(keypad->clk); + regulator_disable(keypad->regulator); + } else { + regulator_enable(keypad->regulator); + clk_enable(keypad->clk); + for (i = 0; i < keypad->board->krow; i++) { + disable_irq_nosync(keypad->gpio_input_irq[i]); + disable_irq_wake(keypad->gpio_input_irq[i]); + } + if (keypad->board->init) + keypad->board->init(); + db5500_keypad_chip_init(keypad); + } +} + +static void db5500_gpio_switch_work(struct work_struct *work) +{ + struct db5500_keypad *keypad = container_of(work, + struct db5500_keypad, switch_work.work); + + db5500_mode_enable(keypad, false); + keypad->enable = false; +} + +static void db5500_gpio_release_work(struct work_struct *work) +{ + int code; + struct db5500_keypad *keypad = container_of(work, + struct db5500_keypad, gpio_work.work); + struct input_dev *input = keypad->input; + + code = MATRIX_SCAN_CODE(keypad->gpio_col, keypad->gpio_row, + KEYPAD_ROW_SHIFT); + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], 1); + input_sync(input); + input_report_key(input, keypad->keymap[code], 0); + input_sync(input); +} + +static int db5500_read_get_gpio_row(struct db5500_keypad *keypad) +{ + int row; + int value = 0; + int ret; + + /* read all rows GPIO data register values */ + for (row = 0; row < keypad->board->krow; row++) { + ret = gpio_get_value(keypad->db5500_rows[row]); + value += (1 << row) * ret; + } + + /* get the exact row */ + for (row = 0; row < keypad->board->krow; row++) { + if (((1 << row) & value) == 0) + return row; + } + + return -1; +} + +static void db5500_set_cols(struct db5500_keypad *keypad, int col) +{ + int i, ret; + int value; + + /* + * Set all columns except the requested column + * output pin as high + */ + for (i = 0; i < keypad->board->kcol; i++) { + if (i == col) + value = 0; + else + value = 1; + ret = gpio_request(keypad->db5500_cols[i], "db5500-kpd"); + + if (ret < 0) { + pr_err("db5500_set_cols: gpio request failed\n"); + continue; + } + + gpio_direction_output(keypad->db5500_cols[i], value); + gpio_free(keypad->db5500_cols[i]); + } +} + +static void db5500_free_cols(struct db5500_keypad *keypad) +{ + int i, ret; + + for (i = 0; i < keypad->board->kcol; i++) { + ret = gpio_request(keypad->db5500_cols[i], "db5500-kpd"); + + if (ret < 0) { + pr_err("db5500_free_cols: gpio request failed\n"); + continue; + } + + gpio_direction_output(keypad->db5500_cols[i], 0); + gpio_free(keypad->db5500_cols[i]); + } +} + +static void db5500_manual_scan(struct db5500_keypad *keypad) +{ + int row; + int col; + + keypad->valid_key = false; + + for (col = 0; col < keypad->board->kcol; col++) { + db5500_set_cols(keypad, col); + row = db5500_read_get_gpio_row(keypad); + if (row >= 0) { + keypad->valid_key = true; + keypad->gpio_row = row; + keypad->gpio_col = col; + break; + } + } + db5500_free_cols(keypad); +} + +static irqreturn_t db5500_keypad_gpio_irq(int irq, void *dev_id) +{ + struct db5500_keypad *keypad = dev_id; + + if (!gpio_get_value(IRQ_TO_GPIO(irq))) { + db5500_manual_scan(keypad); + if (!keypad->enable) { + keypad->enable = true; + db5500_mode_enable(keypad, true); + } + + /* + * Schedule the work queue to change it to + * report the key pressed, if it is not detected in keypad mode. + */ + if (keypad->valid_key) { + schedule_delayed_work(&keypad->gpio_work, + KEY_PRESSED_DELAY); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t db5500_keypad_irq(int irq, void *dev_id) +{ + struct db5500_keypad *keypad = dev_id; + + cancel_delayed_work_sync(&keypad->gpio_work); + cancel_delayed_work_sync(&keypad->switch_work); + db5500_keypad_scan(keypad); + + /* + * Schedule the work queue to change it to + * GPIO mode, if there is no activity in keypad mode + */ + if (keypad->enable) + schedule_delayed_work(&keypad->switch_work, + keypad->board->switch_delay); + + return IRQ_HANDLED; +} + +/** + * db5500_keypad_probe() - Initialze the the keypad driver + * @pdev: pointer to platform device structure + * + * This function will allocate and initialize the instance + * data and request the irq and register to input subsystem driver. + */ +static int __devinit db5500_keypad_probe(struct platform_device *pdev) +{ + struct db5500_keypad_platform_data *plat; + struct db5500_keypad *keypad; + struct resource *res; + struct input_dev *input; + void __iomem *base; + struct clk *clk; + int ret; + int irq; + int i; + + plat = pdev->dev.platform_data; + if (!plat) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + ret = -EINVAL; + goto out_ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keypad irq\n"); + ret = -EINVAL; + goto out_ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "missing platform resources\n"); + ret = -EINVAL; + goto out_ret; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + ret = -EBUSY; + goto out_ret; + } + + base = ioremap(res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + ret = -ENXIO; + goto out_freerequest_memregions; + } + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to clk_get\n"); + ret = PTR_ERR(clk); + goto out_iounmap; + } + + keypad = kzalloc(sizeof(struct db5500_keypad), GFP_KERNEL); + if (!keypad) { + dev_err(&pdev->dev, "failed to allocate keypad memory\n"); + ret = -ENOMEM; + goto out_freeclk; + } + + input = input_allocate_device(); + if (!input) { + dev_err(&pdev->dev, "failed to input_allocate_device\n"); + ret = -ENOMEM; + goto out_freekeypad; + } + + keypad->regulator = regulator_get(&pdev->dev, "v-ape"); + if (IS_ERR(keypad->regulator)) { + dev_err(&pdev->dev, "regulator_get failed\n"); + keypad->regulator = NULL; + ret = -EINVAL; + goto out_regulator_get; + } else { + ret = regulator_enable(keypad->regulator); + if (ret < 0) { + dev_err(&pdev->dev, "regulator_enable failed\n"); + goto out_regulator_enable; + } + } + + input->id.bustype = BUS_HOST; + input->name = "db5500-keypad"; + input->dev.parent = &pdev->dev; + + input->keycode = keypad->keymap; + input->keycodesize = sizeof(keypad->keymap[0]); + input->keycodemax = ARRAY_SIZE(keypad->keymap); + + input_set_capability(input, EV_MSC, MSC_SCAN); + + __set_bit(EV_KEY, input->evbit); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + matrix_keypad_build_keymap(plat->keymap_data, KEYPAD_ROW_SHIFT, + input->keycode, input->keybit); + + ret = input_register_device(input); + if (ret) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", ret); + goto out_freeinput; + } + + keypad->irq = irq; + keypad->board = plat; + keypad->input = input; + keypad->base = base; + keypad->clk = clk; + + INIT_DELAYED_WORK(&keypad->switch_work, db5500_gpio_switch_work); + INIT_DELAYED_WORK(&keypad->gpio_work, db5500_gpio_release_work); + + clk_enable(keypad->clk); +if (!keypad->board->init) { + dev_err(&pdev->dev, "init funtion not defined\n"); + ret = -EINVAL; + goto out_unregisterinput; + } + + if (keypad->board->init() < 0) { + dev_err(&pdev->dev, "keyboard init config failed\n"); + ret = -EINVAL; + goto out_unregisterinput; + } + + if (!keypad->board->exit) { + dev_err(&pdev->dev, "exit funtion not defined\n"); + ret = -EINVAL; + goto out_unregisterinput; + } + + if (keypad->board->exit() < 0) { + dev_err(&pdev->dev, "keyboard exit config failed\n"); + ret = -EINVAL; + goto out_unregisterinput; + } + + for (i = 0; i < keypad->board->krow; i++) { + keypad->db5500_rows[i] = *plat->gpio_input_pins; + keypad->gpio_input_irq[i] = + GPIO_TO_IRQ(keypad->db5500_rows[i]); + plat->gpio_input_pins++; + } + + for (i = 0; i < keypad->board->kcol; i++) { + keypad->db5500_cols[i] = *plat->gpio_output_pins; + plat->gpio_output_pins++; + } + + for (i = 0; i < keypad->board->krow; i++) { + ret = request_threaded_irq(keypad->gpio_input_irq[i], + NULL, db5500_keypad_gpio_irq, + IRQF_TRIGGER_FALLING | IRQF_NO_SUSPEND, + "db5500-keypad-gpio", keypad); + if (ret) { + dev_err(&pdev->dev, "allocate gpio irq %d failed\n", + keypad->gpio_input_irq[i]); + goto out_unregisterinput; + } + enable_irq_wake(keypad->gpio_input_irq[i]); + } + + ret = request_threaded_irq(keypad->irq, NULL, db5500_keypad_irq, + IRQF_ONESHOT, "db5500-keypad", keypad); + if (ret) { + dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); + goto out_unregisterinput; + } + + platform_set_drvdata(pdev, keypad); + + clk_disable(keypad->clk); + regulator_disable(keypad->regulator); + return 0; + +out_unregisterinput: + input_unregister_device(input); + input = NULL; + clk_disable(keypad->clk); +out_freeinput: + input_free_device(input); +out_regulator_enable: + regulator_put(keypad->regulator); +out_regulator_get: + input_free_device(input); +out_freekeypad: + kfree(keypad); +out_freeclk: + clk_put(clk); +out_iounmap: + iounmap(base); +out_freerequest_memregions: + release_mem_region(res->start, resource_size(res)); +out_ret: + return ret; +} + +/** + * db5500_keypad_remove() - Removes the keypad driver + * @pdev: pointer to platform device structure + * + * This function uses to remove the keypad + * driver and returns integer. + */ +static int __devexit db5500_keypad_remove(struct platform_device *pdev) +{ + struct db5500_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + cancel_delayed_work_sync(&keypad->gpio_work); + cancel_delayed_work_sync(&keypad->switch_work); + free_irq(keypad->irq, keypad); + input_unregister_device(keypad->input); + + clk_disable(keypad->clk); + clk_put(keypad->clk); + + if (keypad->board->exit) + keypad->board->exit(); + + regulator_put(keypad->regulator); + + iounmap(keypad->base); + + if (res) + release_mem_region(res->start, resource_size(res)); + + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +/** + * db5500_keypad_suspend() - suspend the keypad controller + * @dev: pointer to device structure + * + * This function is used to suspend the + * keypad controller and returns integer + */ +static int db5500_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct db5500_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + enable_irq_wake(irq); + else { + cancel_delayed_work_sync(&keypad->gpio_work); + cancel_delayed_work_sync(&keypad->switch_work); + disable_irq(irq); + keypad->enable_on_resume = keypad->enable; + if (keypad->enable) { + db5500_mode_enable(keypad, false); + keypad->enable = false; + } + } + + return 0; +} + +/** + * db5500_keypad_resume() - resume the keypad controller + * @dev: pointer to device structure + * + * This function is used to resume the keypad + * controller and returns integer. + */ +static int db5500_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct db5500_keypad *keypad = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + if (device_may_wakeup(dev)) + disable_irq_wake(irq); + else { + if (keypad->enable_on_resume && !keypad->enable) { + keypad->enable = true; + db5500_mode_enable(keypad, true); + /* + * Schedule the work queue to change it to GPIO mode + * if there is no activity keypad mode + */ + schedule_delayed_work(&keypad->switch_work, + keypad->board->switch_delay); + } + enable_irq(irq); + } + + return 0; +} + +static const struct dev_pm_ops db5500_keypad_dev_pm_ops = { + .suspend = db5500_keypad_suspend, + .resume = db5500_keypad_resume, +}; +#endif + +static struct platform_driver db5500_keypad_driver = { + .driver = { + .name = "db5500-keypad", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &db5500_keypad_dev_pm_ops, +#endif + }, + .probe = db5500_keypad_probe, + .remove = __devexit_p(db5500_keypad_remove), +}; + +/** + * db5500_keypad_init() - Initialize the keypad driver + * + * This function uses to initializes the db5500 + * keypad driver and returns integer. + */ +static int __init db5500_keypad_init(void) +{ + return platform_driver_register(&db5500_keypad_driver); +} +module_init(db5500_keypad_init); + +/** + * db5500_keypad_exit() - De-initialize the keypad driver + * + * This function uses to de-initialize the db5500 + * keypad driver and returns none. + */ +static void __exit db5500_keypad_exit(void) +{ + platform_driver_unregister(&db5500_keypad_driver); +} +module_exit(db5500_keypad_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>"); +MODULE_DESCRIPTION("DB5500 Keypad Driver"); +MODULE_ALIAS("platform:db5500-keypad"); |