diff options
Diffstat (limited to 'drivers/isdn/hysdn/ince1pc.h')
| -rw-r--r-- | drivers/isdn/hysdn/ince1pc.h | 134 |
1 files changed, 134 insertions, 0 deletions
diff --git a/drivers/isdn/hysdn/ince1pc.h b/drivers/isdn/hysdn/ince1pc.h new file mode 100644 index 00000000000..4a115a87c78 --- /dev/null +++ b/drivers/isdn/hysdn/ince1pc.h @@ -0,0 +1,134 @@ +/* + * Linux driver for HYSDN cards + * common definitions for both sides of the bus: + * - conventions both spoolers must know + * - channel numbers agreed upon + * + * Author M. Steinkopf + * Copyright 1999 by M. Steinkopf + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + */ + +#ifndef __INCE1PC_H__ +#define __INCE1PC_H__ + +/* basic scalar definitions have same meanning, + * but their declaration location depends on environment + */ + +/*--------------------------------------channel numbers---------------------*/ +#define CHAN_SYSTEM 0x0001 /* system channel (spooler to spooler) */ +#define CHAN_ERRLOG 0x0005 /* error logger */ +#define CHAN_CAPI 0x0064 /* CAPI interface */ +#define CHAN_NDIS_DATA 0x1001 /* NDIS data transfer */ + +/*--------------------------------------POF ready msg-----------------------*/ + /* NOTE: after booting POF sends system ready message to PC: */ +#define RDY_MAGIC 0x52535953UL /* 'SYSR' reversed */ +#define RDY_MAGIC_SIZE 4 /* size in bytes */ + +#define MAX_N_TOK_BYTES 255 + +#define MIN_RDY_MSG_SIZE RDY_MAGIC_SIZE +#define MAX_RDY_MSG_SIZE (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES) + +#define SYSR_TOK_END 0 +#define SYSR_TOK_B_CHAN 1 /* nr. of B-Channels; DataLen=1; def: 2 */ +#define SYSR_TOK_FAX_CHAN 2 /* nr. of FAX Channels; DataLen=1; def: 0 */ +#define SYSR_TOK_MAC_ADDR 3 /* MAC-Address; DataLen=6; def: auto */ +#define SYSR_TOK_ESC 255 /* undefined data size yet */ + /* default values, if not corrected by token: */ +#define SYSR_TOK_B_CHAN_DEF 2 /* assume 2 B-Channels */ +#define SYSR_TOK_FAX_CHAN_DEF 1 /* assume 1 FAX Channel */ + +/* syntax of new SYSR token stream: + * channel: CHAN_SYSTEM + * msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE + * RDY_MAGIC_SIZE <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES) + * msg : 0 1 2 3 {4 5 6 ..} + * S Y S R MAX_N_TOK_BYTES bytes of TokenStream + * + * TokenStream := empty + * | {NonEndTokenChunk} EndToken RotlCRC + * NonEndTokenChunk:= NonEndTokenId DataLen [Data] + * NonEndTokenId := 0x01 .. 0xFE 1 BYTE + * DataLen := 0x00 .. 0xFF 1 BYTE + * Data := DataLen bytes + * EndToken := 0x00 + * RotlCRC := special 1 byte CRC over all NonEndTokenChunk bytes + * s. RotlCRC algorithm + * + * RotlCRC algorithm: + * ucSum= 0 1 uchar + * for all NonEndTokenChunk bytes: + * ROTL(ucSum,1) rotate left by 1 + * ucSum += Char; add current byte with swap around + * RotlCRC= ~ucSum; invert all bits for result + * + * note: + * - for 16-bit FIFO add padding 0 byte to achieve even token data bytes! + */ + +/*--------------------------------------error logger------------------------*/ + /* note: pof needs final 0 ! */ +#define ERRLOG_CMD_REQ "ERRLOG ON" +#define ERRLOG_CMD_REQ_SIZE 10 /* with final 0 byte ! */ +#define ERRLOG_CMD_STOP "ERRLOG OFF" +#define ERRLOG_CMD_STOP_SIZE 11 /* with final 0 byte ! */ + +#define ERRLOG_ENTRY_SIZE 64 /* sizeof(tErrLogEntry) */ + /* remaining text size = 55 */ +#define ERRLOG_TEXT_SIZE (ERRLOG_ENTRY_SIZE-2*4-1) + +typedef struct ErrLogEntry_tag { + +/*00 */ ulong ulErrType; + +/*04 */ ulong ulErrSubtype; + +/*08 */ uchar ucTextSize; + + /*09 */ uchar ucText[ERRLOG_TEXT_SIZE]; + /* ASCIIZ of len ucTextSize-1 */ + +/*40 */ +} tErrLogEntry; + + +#if defined(__TURBOC__) +#if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE +#error size of tErrLogEntry != ERRLOG_ENTRY_SIZE +#endif /* */ +#endif /* */ + +/*--------------------------------------DPRAM boot spooler------------------*/ + /* this is the struture used between pc and + * hyperstone to exchange boot data + */ +#define DPRAM_SPOOLER_DATA_SIZE 0x20 +typedef struct DpramBootSpooler_tag { + +/*00 */ uchar Len; + +/*01 */ volatile uchar RdPtr; + +/*02 */ uchar WrPtr; + +/*03 */ uchar Data[DPRAM_SPOOLER_DATA_SIZE]; + +/*23 */ +} tDpramBootSpooler; + + +#define DPRAM_SPOOLER_MIN_SIZE 5 /* Len+RdPtr+Wrptr+2*data */ +#define DPRAM_SPOOLER_DEF_SIZE 0x23 /* current default size */ + +/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/ + /* at DPRAM offset 0x1C00: */ +#define SIZE_RSV_SOFT_UART 0x1B0 /* 432 bytes reserved for SoftUart */ + + +#endif /* __INCE1PC_H__ */ |