diff options
Diffstat (limited to 'drivers/net/wireless/b43')
-rw-r--r-- | drivers/net/wireless/b43/Kconfig | 5 | ||||
-rw-r--r-- | drivers/net/wireless/b43/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/wireless/b43/b43.h | 51 | ||||
-rw-r--r-- | drivers/net/wireless/b43/bus.c | 122 | ||||
-rw-r--r-- | drivers/net/wireless/b43/bus.h | 62 | ||||
-rw-r--r-- | drivers/net/wireless/b43/dma.c | 38 | ||||
-rw-r--r-- | drivers/net/wireless/b43/leds.c | 15 | ||||
-rw-r--r-- | drivers/net/wireless/b43/lo.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.c | 236 | ||||
-rw-r--r-- | drivers/net/wireless/b43/main.h | 2 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_a.c | 21 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_common.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_g.c | 92 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 135 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_n.c | 37 | ||||
-rw-r--r-- | drivers/net/wireless/b43/pio.c | 10 | ||||
-rw-r--r-- | drivers/net/wireless/b43/rfkill.c | 9 | ||||
-rw-r--r-- | drivers/net/wireless/b43/sdio.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/b43/sysfs.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/b43/tables_lpphy.c | 15 | ||||
-rw-r--r-- | drivers/net/wireless/b43/wa.c | 24 | ||||
-rw-r--r-- | drivers/net/wireless/b43/xmit.c | 2 |
22 files changed, 583 insertions, 316 deletions
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 480595f0441..fe26bf448fd 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -26,6 +26,11 @@ config B43 This driver can be built as a module (recommended) that will be called "b43". If unsure, say M. +config B43_BCMA + bool "Support for BCMA bus" + depends on B43 && BCMA && BROKEN + default y + # Auto-select SSB PCI-HOST support, if possible config B43_PCI_AUTOSELECT bool diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index cef334a8c66..95f7c001fda 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -1,4 +1,5 @@ b43-y += main.o +b43-y += bus.o b43-y += tables.o b43-$(CONFIG_B43_PHY_N) += tables_nphy.o b43-$(CONFIG_B43_PHY_N) += radio_2055.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 25a78cfb7d1..1cb2ddee9dc 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -5,12 +5,14 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/hw_random.h> +#include <linux/bcma/bcma.h> #include <linux/ssb/ssb.h> #include <net/mac80211.h> #include "debugfs.h" #include "leds.h" #include "rfkill.h" +#include "bus.h" #include "lo.h" #include "phy_common.h" @@ -414,6 +416,17 @@ enum { #define B43_MACCMD_CCA 0x00000008 /* Clear channel assessment */ #define B43_MACCMD_BGNOISE 0x00000010 /* Background noise */ +/* BCMA 802.11 core specific IO Control (BCMA_IOCTL) flags */ +#define B43_BCMA_IOCTL_PHY_CLKEN 0x00000004 /* PHY Clock Enable */ +#define B43_BCMA_IOCTL_PHY_RESET 0x00000008 /* PHY Reset */ +#define B43_BCMA_IOCTL_MACPHYCLKEN 0x00000010 /* MAC PHY Clock Control Enable */ +#define B43_BCMA_IOCTL_PLLREFSEL 0x00000020 /* PLL Frequency Reference Select */ +#define B43_BCMA_IOCTL_PHY_BW 0x000000C0 /* PHY band width and clock speed mask (N-PHY+ only?) */ +#define B43_BCMA_IOCTL_PHY_BW_10MHZ 0x00000000 /* 10 MHz bandwidth, 40 MHz PHY */ +#define B43_BCMA_IOCTL_PHY_BW_20MHZ 0x00000040 /* 20 MHz bandwidth, 80 MHz PHY */ +#define B43_BCMA_IOCTL_PHY_BW_40MHZ 0x00000080 /* 40 MHz bandwidth, 160 MHz PHY */ +#define B43_BCMA_IOCTL_GMODE 0x00002000 /* G Mode Enable */ + /* 802.11 core specific TM State Low (SSB_TMSLOW) flags */ #define B43_TMSLOW_GMODE 0x20000000 /* G Mode Enable */ #define B43_TMSLOW_PHY_BANDWIDTH 0x00C00000 /* PHY band width and clock speed mask (N-PHY only) */ @@ -707,7 +720,8 @@ enum { /* Data structure for one wireless device (802.11 core) */ struct b43_wldev { - struct ssb_device *sdev; + struct ssb_device *sdev; /* TODO: remove when b43_bus_dev is ready */ + struct b43_bus_dev *dev; struct b43_wl *wl; /* The device initialization status. @@ -879,36 +893,59 @@ static inline enum ieee80211_band b43_current_band(struct b43_wl *wl) return wl->hw->conf.channel->band; } +static inline int b43_bus_may_powerdown(struct b43_wldev *wldev) +{ + return wldev->dev->bus_may_powerdown(wldev->dev); +} +static inline int b43_bus_powerup(struct b43_wldev *wldev, bool dynamic_pctl) +{ + return wldev->dev->bus_powerup(wldev->dev, dynamic_pctl); +} +static inline int b43_device_is_enabled(struct b43_wldev *wldev) +{ + return wldev->dev->device_is_enabled(wldev->dev); +} +static inline void b43_device_enable(struct b43_wldev *wldev, + u32 core_specific_flags) +{ + wldev->dev->device_enable(wldev->dev, core_specific_flags); +} +static inline void b43_device_disable(struct b43_wldev *wldev, + u32 core_specific_flags) +{ + wldev->dev->device_disable(wldev->dev, core_specific_flags); +} + static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) { - return ssb_read16(dev->sdev, offset); + return dev->dev->read16(dev->dev, offset); } static inline void b43_write16(struct b43_wldev *dev, u16 offset, u16 value) { - ssb_write16(dev->sdev, offset, value); + dev->dev->write16(dev->dev, offset, value); } static inline u32 b43_read32(struct b43_wldev *dev, u16 offset) { - return ssb_read32(dev->sdev, offset); + return dev->dev->read32(dev->dev, offset); } static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value) { - ssb_write32(dev->sdev, offset, value); + dev->dev->write32(dev->dev, offset, value); } static inline void b43_block_read(struct b43_wldev *dev, void *buffer, size_t count, u16 offset, u8 reg_width) { - ssb_block_read(dev->sdev, buffer, count, offset, reg_width); + dev->dev->block_read(dev->dev, buffer, count, offset, reg_width); } static inline void b43_block_write(struct b43_wldev *dev, const void *buffer, size_t count, u16 offset, u8 reg_width) { - ssb_block_write(dev->sdev, buffer, count, offset, reg_width); + dev->dev->block_write(dev->dev, buffer, count, offset, reg_width); } static inline bool b43_using_pio_transfers(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c new file mode 100644 index 00000000000..6c63aecd6ab --- /dev/null +++ b/drivers/net/wireless/b43/bus.c @@ -0,0 +1,122 @@ +/* + + Broadcom B43 wireless driver + Bus abstraction layer + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "bus.h" + + +/* SSB */ + +static inline int b43_bus_ssb_bus_may_powerdown(struct b43_bus_dev *dev) +{ + return ssb_bus_may_powerdown(dev->sdev->bus); +} +static inline int b43_bus_ssb_bus_powerup(struct b43_bus_dev *dev, + bool dynamic_pctl) +{ + return ssb_bus_powerup(dev->sdev->bus, dynamic_pctl); +} +static inline int b43_bus_ssb_device_is_enabled(struct b43_bus_dev *dev) +{ + return ssb_device_is_enabled(dev->sdev); +} +static inline void b43_bus_ssb_device_enable(struct b43_bus_dev *dev, + u32 core_specific_flags) +{ + ssb_device_enable(dev->sdev, core_specific_flags); +} +static inline void b43_bus_ssb_device_disable(struct b43_bus_dev *dev, + u32 core_specific_flags) +{ + ssb_device_disable(dev->sdev, core_specific_flags); +} + +static inline u16 b43_bus_ssb_read16(struct b43_bus_dev *dev, u16 offset) +{ + return ssb_read16(dev->sdev, offset); +} +static inline u32 b43_bus_ssb_read32(struct b43_bus_dev *dev, u16 offset) +{ + return ssb_read32(dev->sdev, offset); +} +static inline +void b43_bus_ssb_write16(struct b43_bus_dev *dev, u16 offset, u16 value) +{ + ssb_write16(dev->sdev, offset, value); +} +static inline +void b43_bus_ssb_write32(struct b43_bus_dev *dev, u16 offset, u32 value) +{ + ssb_write32(dev->sdev, offset, value); +} +static inline +void b43_bus_ssb_block_read(struct b43_bus_dev *dev, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + ssb_block_read(dev->sdev, buffer, count, offset, reg_width); +} +static inline +void b43_bus_ssb_block_write(struct b43_bus_dev *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + ssb_block_write(dev->sdev, buffer, count, offset, reg_width); +} + +struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev) +{ + struct b43_bus_dev *dev = kzalloc(sizeof(*dev), GFP_KERNEL); + + dev->bus_type = B43_BUS_SSB; + dev->sdev = sdev; + + dev->bus_may_powerdown = b43_bus_ssb_bus_may_powerdown; + dev->bus_powerup = b43_bus_ssb_bus_powerup; + dev->device_is_enabled = b43_bus_ssb_device_is_enabled; + dev->device_enable = b43_bus_ssb_device_enable; + dev->device_disable = b43_bus_ssb_device_disable; + + dev->read16 = b43_bus_ssb_read16; + dev->read32 = b43_bus_ssb_read32; + dev->write16 = b43_bus_ssb_write16; + dev->write32 = b43_bus_ssb_write32; + dev->block_read = b43_bus_ssb_block_read; + dev->block_write = b43_bus_ssb_block_write; + + dev->dev = sdev->dev; + dev->dma_dev = sdev->dma_dev; + dev->irq = sdev->irq; + + dev->board_vendor = sdev->bus->boardinfo.vendor; + dev->board_type = sdev->bus->boardinfo.type; + dev->board_rev = sdev->bus->boardinfo.rev; + + dev->chip_id = sdev->bus->chip_id; + dev->chip_rev = sdev->bus->chip_rev; + dev->chip_pkg = sdev->bus->chip_package; + + dev->bus_sprom = &sdev->bus->sprom; + + dev->core_id = sdev->id.coreid; + dev->core_rev = sdev->id.revision; + + return dev; +} diff --git a/drivers/net/wireless/b43/bus.h b/drivers/net/wireless/b43/bus.h new file mode 100644 index 00000000000..79a5ab4270c --- /dev/null +++ b/drivers/net/wireless/b43/bus.h @@ -0,0 +1,62 @@ +#ifndef B43_BUS_H_ +#define B43_BUS_H_ + +enum b43_bus_type { + B43_BUS_SSB, +}; + +struct b43_bus_dev { + enum b43_bus_type bus_type; + union { + struct ssb_device *sdev; + }; + + int (*bus_may_powerdown)(struct b43_bus_dev *dev); + int (*bus_powerup)(struct b43_bus_dev *dev, bool dynamic_pctl); + int (*device_is_enabled)(struct b43_bus_dev *dev); + void (*device_enable)(struct b43_bus_dev *dev, + u32 core_specific_flags); + void (*device_disable)(struct b43_bus_dev *dev, + u32 core_specific_flags); + + u16 (*read16)(struct b43_bus_dev *dev, u16 offset); + u32 (*read32)(struct b43_bus_dev *dev, u16 offset); + void (*write16)(struct b43_bus_dev *dev, u16 offset, u16 value); + void (*write32)(struct b43_bus_dev *dev, u16 offset, u32 value); + void (*block_read)(struct b43_bus_dev *dev, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct b43_bus_dev *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width); + + struct device *dev; + struct device *dma_dev; + unsigned int irq; + + u16 board_vendor; + u16 board_type; + u16 board_rev; + + u16 chip_id; + u8 chip_rev; + u8 chip_pkg; + + struct ssb_sprom *bus_sprom; + + u16 core_id; + u8 core_rev; +}; + +static inline bool b43_bus_host_is_pcmcia(struct b43_bus_dev *dev) +{ + return (dev->bus_type == B43_BUS_SSB && + dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA); +} +static inline bool b43_bus_host_is_sdio(struct b43_bus_dev *dev) +{ + return (dev->bus_type == B43_BUS_SSB && + dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO); +} + +struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev); + +#endif /* B43_BUS_H_ */ diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 47d44bcff37..d02cf8300e3 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -333,10 +333,10 @@ static inline dma_addr_t dmaaddr; if (tx) { - dmaaddr = dma_map_single(ring->dev->sdev->dma_dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_TO_DEVICE); } else { - dmaaddr = dma_map_single(ring->dev->sdev->dma_dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_FROM_DEVICE); } @@ -348,10 +348,10 @@ static inline dma_addr_t addr, size_t len, int tx) { if (tx) { - dma_unmap_single(ring->dev->sdev->dma_dev, + dma_unmap_single(ring->dev->dev->dma_dev, addr, len, DMA_TO_DEVICE); } else { - dma_unmap_single(ring->dev->sdev->dma_dev, + dma_unmap_single(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } } @@ -361,7 +361,7 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->sdev->dma_dev, + dma_sync_single_for_cpu(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -370,7 +370,7 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->sdev->dma_dev, + dma_sync_single_for_device(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -401,7 +401,7 @@ static int alloc_ringmemory(struct b43_dmaring *ring) */ if (ring->type == B43_DMA_64BIT) flags |= GFP_DMA; - ring->descbase = dma_alloc_coherent(ring->dev->sdev->dma_dev, + ring->descbase = dma_alloc_coherent(ring->dev->dev->dma_dev, B43_DMA_RINGMEMSIZE, &(ring->dmabase), flags); if (!ring->descbase) { @@ -415,7 +415,7 @@ static int alloc_ringmemory(struct b43_dmaring *ring) static void free_ringmemory(struct b43_dmaring *ring) { - dma_free_coherent(ring->dev->sdev->dma_dev, B43_DMA_RINGMEMSIZE, + dma_free_coherent(ring->dev->dev->dma_dev, B43_DMA_RINGMEMSIZE, ring->descbase, ring->dmabase); } @@ -523,7 +523,7 @@ static bool b43_dma_mapping_error(struct b43_dmaring *ring, dma_addr_t addr, size_t buffersize, bool dma_to_device) { - if (unlikely(dma_mapping_error(ring->dev->sdev->dma_dev, addr))) + if (unlikely(dma_mapping_error(ring->dev->dev->dma_dev, addr))) return 1; switch (ring->type) { @@ -757,14 +757,14 @@ static void dmacontroller_cleanup(struct b43_dmaring *ring) static void free_all_descbuffers(struct b43_dmaring *ring) { - struct b43_dmadesc_generic *desc; struct b43_dmadesc_meta *meta; int i; if (!ring->used_slots) return; for (i = 0; i < ring->nr_slots; i++) { - desc = ring->ops->idx2desc(ring, i, &meta); + /* get meta - ignore returned value */ + ring->ops->idx2desc(ring, i, &meta); if (!meta->skb || b43_dma_ptr_is_poisoned(meta->skb)) { B43_WARN_ON(!ring->tx); @@ -869,7 +869,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->sdev->dma_dev, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, b43_txhdr_size(dev), DMA_TO_DEVICE); @@ -884,7 +884,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->sdev->dma_dev, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, b43_txhdr_size(dev), DMA_TO_DEVICE); @@ -898,7 +898,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, } } - dma_unmap_single(dev->sdev->dma_dev, + dma_unmap_single(dev->dev->dma_dev, dma_test, b43_txhdr_size(dev), DMA_TO_DEVICE); } @@ -1013,9 +1013,9 @@ static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask) /* Try to set the DMA mask. If it fails, try falling back to a * lower mask, as we can always also support a lower one. */ while (1) { - err = dma_set_mask(dev->sdev->dma_dev, mask); + err = dma_set_mask(dev->dev->dma_dev, mask); if (!err) { - err = dma_set_coherent_mask(dev->sdev->dma_dev, mask); + err = dma_set_coherent_mask(dev->dev->dma_dev, mask); if (!err) break; } @@ -1085,7 +1085,7 @@ int b43_dma_init(struct b43_wldev *dev) goto err_destroy_mcast; /* No support for the TX status DMA ring. */ - B43_WARN_ON(dev->sdev->id.revision < 5); + B43_WARN_ON(dev->dev->core_rev < 5); b43dbg(dev->wl, "%u-bit DMA initialized\n", (unsigned int)type); @@ -1388,7 +1388,6 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, { const struct b43_dma_ops *ops; struct b43_dmaring *ring; - struct b43_dmadesc_generic *desc; struct b43_dmadesc_meta *meta; int slot, firstused; bool frame_succeed; @@ -1416,7 +1415,8 @@ void b43_dma_handle_txstatus(struct b43_wldev *dev, ops = ring->ops; while (1) { B43_WARN_ON(slot < 0 || slot >= ring->nr_slots); - desc = ops->idx2desc(ring, slot, &meta); + /* get meta - ignore returned value */ + ops->idx2desc(ring, slot, &meta); if (b43_dma_ptr_is_poisoned(meta->skb)) { b43dbg(dev->wl, "Poisoned TX slot %d (first=%d) " diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 0cafafe368a..b56ed41fc1b 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -138,7 +138,7 @@ static int b43_register_led(struct b43_wldev *dev, struct b43_led *led, led->led_dev.default_trigger = default_trigger; led->led_dev.brightness_set = b43_led_brightness_set; - err = led_classdev_register(dev->sdev->dev, &led->led_dev); + err = led_classdev_register(dev->dev->dev, &led->led_dev); if (err) { b43warn(dev->wl, "LEDs: Failed to register %s\n", name); led->wl = NULL; @@ -215,13 +215,12 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev, enum b43_led_behaviour *behaviour, bool *activelow) { - struct ssb_bus *bus = dev->sdev->bus; u8 sprom[4]; - sprom[0] = bus->sprom.gpio0; - sprom[1] = bus->sprom.gpio1; - sprom[2] = bus->sprom.gpio2; - sprom[3] = bus->sprom.gpio3; + sprom[0] = dev->dev->bus_sprom->gpio0; + sprom[1] = dev->dev->bus_sprom->gpio1; + sprom[2] = dev->dev->bus_sprom->gpio2; + sprom[3] = dev->dev->bus_sprom->gpio3; if (sprom[led_index] == 0xFF) { /* There is no LED information in the SPROM @@ -231,12 +230,12 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev, case 0: *behaviour = B43_LED_ACTIVITY; *activelow = 1; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ) + if (dev->dev->board_vendor == PCI_VENDOR_ID_COMPAQ) *behaviour = B43_LED_RADIO_ALL; break; case 1: *behaviour = B43_LED_RADIO_B; - if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK) + if (dev->dev->board_vendor == PCI_VENDOR_ID_ASUSTEK) *behaviour = B43_LED_ASSOC; break; case 2: diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index 2ef7d4b3854..a3dc8bb8ca9 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -98,7 +98,7 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev, rfover |= pga; rfover |= lna; rfover |= trsw_rx; - if ((dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) + if ((dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) && phy->rev > 6) rfover |= B43_PHY_RFOVERVAL_EXTLNA; @@ -301,14 +301,12 @@ static void lo_measure_gain_values(struct b43_wldev *dev, max_rx_gain = 0; if (has_loopback_gain(phy)) { - int trsw_rx = 0; int trsw_rx_gain; if (use_trsw_rx) { trsw_rx_gain = gphy->trsw_rx_gain / 2; if (max_rx_gain >= trsw_rx_gain) { trsw_rx_gain = max_rx_gain - trsw_rx_gain; - trsw_rx = 0x20; } } else trsw_rx_gain = max_rx_gain; @@ -387,7 +385,7 @@ struct lo_g_saved_values { static void lo_measure_setup(struct b43_wldev *dev, struct lo_g_saved_values *sav) { - struct ssb_sprom *sprom = &dev->sdev->bus->sprom; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; struct b43_txpower_lo_control *lo = gphy->lo_control; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index eb415968698..cae31463ead 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -113,6 +113,16 @@ static int b43_modparam_pio = B43_PIO_DEFAULT; module_param_named(pio, b43_modparam_pio, int, 0644); MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); +#ifdef CONFIG_B43_BCMA +static const struct bcma_device_id b43_bcma_tbl[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS), + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, b43_bcma_tbl); +#endif + static const struct ssb_device_id b43_ssb_tbl[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 6), @@ -548,7 +558,7 @@ void b43_tsf_read(struct b43_wldev *dev, u64 *tsf) { u32 low, high; - B43_WARN_ON(dev->sdev->id.revision < 3); + B43_WARN_ON(dev->dev->core_rev < 3); /* The hardware guarantees us an atomic read, if we * read the low register first. */ @@ -586,7 +596,7 @@ static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf) { u32 low, high; - B43_WARN_ON(dev->sdev->id.revision < 3); + B43_WARN_ON(dev->dev->core_rev < 3); low = tsf; high = (tsf >> 32); @@ -714,7 +724,7 @@ void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on) b43_ram_write(dev, i * 4, buffer[i]); b43_write16(dev, 0x0568, 0x0000); - if (dev->sdev->id.revision < 11) + if (dev->dev->core_rev < 11) b43_write16(dev, 0x07C0, 0x0000); else b43_write16(dev, 0x07C0, 0x0100); @@ -1132,7 +1142,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) b43_write32(dev, B43_MMIO_MACCTL, macctl); /* Commit write */ b43_read32(dev, B43_MMIO_MACCTL); - if (awake && dev->sdev->id.revision >= 5) { + if (awake && dev->dev->core_rev >= 5) { /* Wait for the microcode to wake up. */ for (i = 0; i < 100; i++) { ucstat = b43_shm_read16(dev, B43_SHM_SHARED, @@ -1144,35 +1154,39 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } } -static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags) +static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode) { + struct ssb_device *sdev = dev->dev->sdev; u32 tmslow; + u32 flags = 0; + if (gmode) + flags |= B43_TMSLOW_GMODE; flags |= B43_TMSLOW_PHYCLKEN; flags |= B43_TMSLOW_PHYRESET; if (dev->phy.type == B43_PHYTYPE_N) flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */ - ssb_device_enable(dev->sdev, flags); + b43_device_enable(dev, flags); msleep(2); /* Wait for the PLL to turn on. */ /* Now take the PHY out of Reset again */ - tmslow = ssb_read32(dev->sdev, SSB_TMSLOW); + tmslow = ssb_read32(sdev, SSB_TMSLOW); tmslow |= SSB_TMSLOW_FGC; tmslow &= ~B43_TMSLOW_PHYRESET; - ssb_write32(dev->sdev, SSB_TMSLOW, tmslow); - ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */ + ssb_write32(sdev, SSB_TMSLOW, tmslow); + ssb_read32(sdev, SSB_TMSLOW); /* flush */ msleep(1); tmslow &= ~SSB_TMSLOW_FGC; - ssb_write32(dev->sdev, SSB_TMSLOW, tmslow); - ssb_read32(dev->sdev, SSB_TMSLOW); /* flush */ + ssb_write32(sdev, SSB_TMSLOW, tmslow); + ssb_read32(sdev, SSB_TMSLOW); /* flush */ msleep(1); } -void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) +void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode) { u32 macctl; - b43_ssb_wireless_core_reset(dev, flags); + b43_ssb_wireless_core_reset(dev, gmode); /* Turn Analog ON, but only if we already know the PHY-type. * This protects against very early setup where we don't know the @@ -1183,7 +1197,7 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; - if (flags & B43_TMSLOW_GMODE) + if (gmode) macctl |= B43_MACCTL_GMODE; macctl |= B43_MACCTL_IHR_ENABLED; b43_write32(dev, B43_MMIO_MACCTL, macctl); @@ -1221,7 +1235,7 @@ static void drain_txstatus_queue(struct b43_wldev *dev) { u32 dummy; - if (dev->sdev->id.revision < 5) + if (dev->dev->core_rev < 5) return; /* Read all entries from the microcode TXstatus FIFO * and throw them away. @@ -1427,9 +1441,9 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev, /* Get the mask of available antennas. */ if (dev->phy.gmode) - antenna_mask = dev->sdev->bus->sprom.ant_available_bg; + antenna_mask = dev->dev->bus_sprom->ant_available_bg; else - antenna_mask = dev->sdev->bus->sprom.ant_available_a; + antenna_mask = dev->dev->bus_sprom->ant_available_a; if (!(antenna_mask & (1 << (antenna_nr - 1)))) { /* This antenna is not available. Fall back to default. */ @@ -1644,7 +1658,7 @@ static void b43_beacon_update_trigger_work(struct work_struct *work) mutex_lock(&wl->mutex); dev = wl->current_dev; if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) { - if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) { + if (b43_bus_host_is_sdio(dev->dev)) { /* wl->mutex is enough. */ b43_do_beacon_update_trigger_work(dev); mmiowb(); @@ -1689,7 +1703,7 @@ static void b43_update_templates(struct b43_wl *wl) static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int) { b43_time_lock(dev); - if (dev->sdev->id.revision >= 3) { + if (dev->dev->core_rev >= 3) { b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16)); b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10)); } else { @@ -2063,7 +2077,7 @@ int b43_do_request_fw(struct b43_request_fw_context *ctx, B43_WARN_ON(1); return -ENOSYS; } - err = request_firmware(&blob, ctx->fwname, ctx->dev->sdev->dev); + err = request_firmware(&blob, ctx->fwname, ctx->dev->dev->dev); if (err == -ENOENT) { snprintf(ctx->errors[ctx->req_type], sizeof(ctx->errors[ctx->req_type]), @@ -2113,7 +2127,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) { struct b43_wldev *dev = ctx->dev; struct b43_firmware *fw = &ctx->dev->fw; - const u8 rev = ctx->dev->sdev->id.revision; + const u8 rev = ctx->dev->dev->core_rev; const char *filename; u32 tmshigh; int err; @@ -2157,7 +2171,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { - tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH); + tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1initvals5"; else @@ -2202,7 +2216,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx) switch (dev->phy.type) { case B43_PHYTYPE_A: if ((rev >= 5) && (rev <= 10)) { - tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH); + tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH); if (tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY) filename = "a0g1bsinitvals5"; else @@ -2448,7 +2462,7 @@ static int b43_upload_microcode(struct b43_wldev *dev) snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u", dev->fw.rev, dev->fw.patch); - wiphy->hw_version = dev->sdev->id.coreid; + wiphy->hw_version = dev->dev->core_id; if (b43_is_old_txhdr_format(dev)) { /* We're over the deadline, but we keep support for old fw @@ -2566,7 +2580,7 @@ out: */ static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; #ifdef CONFIG_SSB_DRIVER_PCICORE return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev); @@ -2588,7 +2602,7 @@ static int b43_gpio_init(struct b43_wldev *dev) mask = 0x0000001F; set = 0x0000000F; - if (dev->sdev->bus->chip_id == 0x4301) { + if (dev->dev->chip_id == 0x4301) { mask |= 0x0060; set |= 0x0060; } @@ -2599,14 +2613,14 @@ static int b43_gpio_init(struct b43_wldev *dev) mask |= 0x0180; set |= 0x0180; } - if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) { + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) { b43_write16(dev, B43_MMIO_GPIO_MASK, b43_read16(dev, B43_MMIO_GPIO_MASK) | 0x0200); mask |= 0x0200; set |= 0x0200; } - if (dev->sdev->id.revision >= 2) + if (dev->dev->core_rev >= 2) mask |= 0x0010; /* FIXME: This is redundant. */ gpiodev = b43_ssb_gpio_dev(dev); @@ -2741,15 +2755,15 @@ static void b43_adjust_opmode(struct b43_wldev *dev) /* Workaround: On old hardware the HW-MAC-address-filter * doesn't work properly, so always run promisc in filter * it in software. */ - if (dev->sdev->id.revision <= 4) + if (dev->dev->core_rev <= 4) ctl |= B43_MACCTL_PROMISC; b43_write32(dev, B43_MMIO_MACCTL, ctl); cfp_pretbtt = 2; if ((ctl & B43_MACCTL_INFRA) && !(ctl & B43_MACCTL_AP)) { - if (dev->sdev->bus->chip_id == 0x4306 && - dev->sdev->bus->chip_rev == 3) + if (dev->dev->chip_id == 0x4306 && + dev->dev->chip_rev == 3) cfp_pretbtt = 100; else cfp_pretbtt = 50; @@ -2907,7 +2921,7 @@ static int b43_chip_init(struct b43_wldev *dev) b43_write16(dev, 0x005E, value16); } b43_write32(dev, 0x0100, 0x01000000); - if (dev->sdev->id.revision < 5) + if (dev->dev->core_rev < 5) b43_write32(dev, 0x010C, 0x01000000); b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL) @@ -2922,7 +2936,7 @@ static int b43_chip_init(struct b43_wldev *dev) /* Initially set the wireless operation mode. */ b43_adjust_opmode(dev); - if (dev->sdev->id.revision < 3) { + if (dev->dev->core_rev < 3) { b43_write16(dev, 0x060E, 0x0000); b43_write16(dev, 0x0610, 0x8000); b43_write16(dev, 0x0604, 0x0000); @@ -3105,7 +3119,7 @@ static int b43_validate_chipaccess(struct b43_wldev *dev) b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0); b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4); - if ((dev->sdev->id.revision >= 3) && (dev->sdev->id.revision <= 10)) { + if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) { /* The 32bit register shadows the two 16bit registers * with update sideeffects. Validate this. */ b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA); @@ -3954,7 +3968,7 @@ redo: /* Disable interrupts on the device. */ b43_set_status(dev, B43_STAT_INITIALIZED); - if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) { + if (b43_bus_host_is_sdio(dev->dev)) { /* wl->mutex is locked. That is enough. */ b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0); b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */ @@ -3967,11 +3981,11 @@ redo: /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */ orig_dev = dev; mutex_unlock(&wl->mutex); - if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) { + if (b43_bus_host_is_sdio(dev->dev)) { b43_sdio_free_irq(dev); } else { - synchronize_irq(dev->sdev->irq); - free_irq(dev->sdev->irq, dev); + synchronize_irq(dev->dev->irq); + free_irq(dev->dev->irq, dev); } mutex_lock(&wl->mutex); dev = wl->current_dev; @@ -4004,19 +4018,19 @@ static int b43_wireless_core_start(struct b43_wldev *dev) B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED); drain_txstatus_queue(dev); - if (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) { + if (b43_bus_host_is_sdio(dev->dev)) { err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler); if (err) { b43err(dev->wl, "Cannot request SDIO IRQ\n"); goto out; } } else { - err = request_threaded_irq(dev->sdev->irq, b43_interrupt_handler, + err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler, b43_interrupt_thread_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (err) { b43err(dev->wl, "Cannot request IRQ-%d\n", - dev->sdev->irq); + dev->dev->irq); goto out; } } @@ -4085,7 +4099,7 @@ static int b43_phy_versioning(struct b43_wldev *dev) #endif default: unsupported = 1; - }; + } if (unsupported) { b43err(dev->wl, "FOUND UNSUPPORTED PHY " "(Analog %u, Type %u, Revision %u)\n", @@ -4096,10 +4110,10 @@ static int b43_phy_versioning(struct b43_wldev *dev) analog_type, phy_type, phy_rev); /* Get RADIO versioning */ - if (dev->sdev->bus->chip_id == 0x4317) { - if (dev->sdev->bus->chip_rev == 0) + if (dev->dev->chip_id == 0x4317) { + if (dev->dev->chip_rev == 0) tmp = 0x3205017F; - else if (dev->sdev->bus->chip_rev == 1) + else if (dev->dev->chip_rev == 1) tmp = 0x4205017F; else tmp = 0x5205017F; @@ -4204,7 +4218,7 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev) static void b43_bluetooth_coext_enable(struct b43_wldev *dev) { - struct ssb_sprom *sprom = &dev->sdev->bus->sprom; + struct ssb_sprom *sprom = dev->dev->bus_sprom; u64 hf; if (!modparam_btcoex) @@ -4231,16 +4245,21 @@ static void b43_bluetooth_coext_disable(struct b43_wldev *dev) static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus; u32 tmp; + if (dev->dev->bus_type != B43_BUS_SSB) + return; + + bus = dev->dev->sdev->bus; + if ((bus->chip_id == 0x4311 && bus->chip_rev == 2) || (bus->chip_id == 0x4312)) { - tmp = ssb_read32(dev->sdev, SSB_IMCFGLO); + tmp = ssb_read32(dev->dev->sdev, SSB_IMCFGLO); tmp &= ~SSB_IMCFGLO_REQTO; tmp &= ~SSB_IMCFGLO_SERTO; tmp |= 0x3; - ssb_write32(dev->sdev, SSB_IMCFGLO, tmp); + ssb_write32(dev->dev->sdev, SSB_IMCFGLO, tmp); ssb_commit_settings(bus); } } @@ -4310,29 +4329,26 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) dev->wl->current_beacon = NULL; } - ssb_device_disable(dev->sdev, 0); - ssb_bus_may_powerdown(dev->sdev->bus); + b43_device_disable(dev, 0); + b43_bus_may_powerdown(dev); } /* Initialize a wireless core */ static int b43_wireless_core_init(struct b43_wldev *dev) { struct ssb_bus *bus = dev->sdev->bus; - struct ssb_sprom *sprom = &bus->sprom; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; int err; u64 hf; - u32 tmp; B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); - err = ssb_bus_powerup(bus, 0); + err = b43_bus_powerup(dev, 0); if (err) goto out; - if (!ssb_device_is_enabled(dev->sdev)) { - tmp = phy->gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); - } + if (!b43_device_is_enabled(dev)) + b43_wireless_core_reset(dev, phy->gmode); /* Reset all data structures. */ setup_struct_wldev_for_init(dev); @@ -4352,7 +4368,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) if (err) goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_WLCOREREV, dev->sdev->id.revision); + B43_SHM_SH_WLCOREREV, dev->dev->core_rev); hf = b43_hf_read(dev); if (phy->type == B43_PHYTYPE_G) { hf |= B43_HF_SYMW; @@ -4399,8 +4415,8 @@ static int b43_wireless_core_init(struct b43_wldev *dev) /* Maximum Contention Window */ b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF); - if ((dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA) || - (dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO) || + if (b43_bus_host_is_pcmcia(dev->dev) || + b43_bus_host_is_sdio(dev->dev) || dev->use_pio) { dev->__using_pio_transfers = 1; err = b43_pio_init(dev); @@ -4414,7 +4430,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_set_synth_pu_delay(dev, 1); b43_bluetooth_coext_enable(dev); - ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); + b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)); b43_upload_card_macaddress(dev); b43_security_init(dev); @@ -4431,7 +4447,7 @@ out: err_chip_exit: b43_chip_exit(dev); err_busdown: - ssb_bus_may_powerdown(bus); + b43_bus_may_powerdown(dev); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; } @@ -4741,7 +4757,6 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL; int err; bool have_2ghz_phy = 0, have_5ghz_phy = 0; - u32 tmp; /* Do NOT do any device initialization here. * Do it in wireless_core_init() instead. @@ -4750,13 +4765,13 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) * that in core_init(), too. */ - err = ssb_bus_powerup(bus, 0); + err = b43_bus_powerup(dev, 0); if (err) { b43err(wl, "Bus powerup failed\n"); goto out; } /* Get the PHY type. */ - if (dev->sdev->id.revision >= 5) { + if (dev->dev->core_rev >= 5) { u32 tmshigh; tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH); @@ -4767,8 +4782,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) dev->phy.gmode = have_2ghz_phy; dev->phy.radio_on = 1; - tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); + b43_wireless_core_reset(dev, dev->phy.gmode); err = b43_phy_versioning(dev); if (err) @@ -4816,8 +4830,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) goto err_powerdown; dev->phy.gmode = have_2ghz_phy; - tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; - b43_wireless_core_reset(dev, tmp); + b43_wireless_core_reset(dev, dev->phy.gmode); err = b43_validate_chipaccess(dev); if (err) @@ -4832,8 +4845,8 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) INIT_WORK(&dev->restart_work, b43_chip_reset); dev->phy.ops->switch_analog(dev, 0); - ssb_device_disable(dev->sdev, 0); - ssb_bus_may_powerdown(bus); + b43_device_disable(dev, 0); + b43_bus_may_powerdown(dev); out: return err; @@ -4841,11 +4854,11 @@ out: err_phy_free: b43_phy_free(dev); err_powerdown: - ssb_bus_may_powerdown(bus); + b43_bus_may_powerdown(dev); return err; } -static void b43_one_core_detach(struct ssb_device *dev) +static void b43_one_core_detach(struct b43_bus_dev *dev) { struct b43_wldev *wldev; struct b43_wl *wl; @@ -4853,17 +4866,17 @@ static void b43_one_core_detach(struct ssb_device *dev) /* Do not cancel ieee80211-workqueue based work here. * See comment in b43_remove(). */ - wldev = ssb_get_drvdata(dev); + wldev = ssb_get_drvdata(dev->sdev); wl = wldev->wl; b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); wl->nr_devs--; - ssb_set_drvdata(dev, NULL); + ssb_set_drvdata(dev->sdev, NULL); kfree(wldev); } -static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) +static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl) { struct b43_wldev *wldev; int err = -ENOMEM; @@ -4873,7 +4886,8 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) goto out; wldev->use_pio = b43_modparam_pio; - wldev->sdev = dev; + wldev->dev = dev; + wldev->sdev = dev->sdev; /* TODO: Remove when not needed */ wldev->wl = wl; b43_set_status(wldev, B43_STAT_UNINIT); wldev->bad_frames_preempt = modparam_bad_frames_preempt; @@ -4885,7 +4899,7 @@ static int b43_one_core_attach(struct ssb_device *dev, struct b43_wl *wl) list_add(&wldev->list, &wl->devlist); wl->nr_devs++; - ssb_set_drvdata(dev, wldev); + ssb_set_drvdata(dev->sdev, wldev); b43_debugfs_add_device(wldev); out: @@ -4926,11 +4940,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus) } } -static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl) +static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl) { struct ieee80211_hw *hw = wl->hw; - ssb_set_devtypedata(dev, NULL); + ssb_set_devtypedata(dev->sdev, NULL); ieee80211_free_hw(hw); } @@ -4982,24 +4996,48 @@ static struct b43_wl *b43_wireless_init(struct ssb_device *dev) return wl; } -static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id) +#ifdef CONFIG_B43_BCMA +static int b43_bcma_probe(struct bcma_device *core) +{ + b43err(NULL, "BCMA is not supported yet!"); + return -EOPNOTSUPP; +} + +static void b43_bcma_remove(struct bcma_device *core) +{ + /* TODO */ +} + +static struct bcma_driver b43_bcma_driver = { + .name = KBUILD_MODNAME, + .id_table = b43_bcma_tbl, + .probe = b43_bcma_probe, + .remove = b43_bcma_remove, +}; +#endif + +static +int b43_ssb_probe(struct ssb_device *sdev, const struct ssb_device_id *id) { + struct b43_bus_dev *dev; struct b43_wl *wl; int err; int first = 0; - wl = ssb_get_devtypedata(dev); + dev = b43_bus_dev_ssb_init(sdev); + + wl = ssb_get_devtypedata(sdev); if (!wl) { /* Probing the first core. Must setup common struct b43_wl */ first = 1; - b43_sprom_fixup(dev->bus); - wl = b43_wireless_init(dev); + b43_sprom_fixup(sdev->bus); + wl = b43_wireless_init(sdev); if (IS_ERR(wl)) { err = PTR_ERR(wl); goto out; } - ssb_set_devtypedata(dev, wl); - B43_WARN_ON(ssb_get_devtypedata(dev) != wl); + ssb_set_devtypedata(sdev, wl); + B43_WARN_ON(ssb_get_devtypedata(sdev) != wl); } err = b43_one_core_attach(dev, wl); if (err) @@ -5023,10 +5061,10 @@ static int b43_ssb_probe(struct ssb_device *dev, const struct ssb_device_id *id) return err; } -static void b43_ssb_remove(struct ssb_device *dev) +static void b43_ssb_remove(struct ssb_device *sdev) { - struct b43_wl *wl = ssb_get_devtypedata(dev); - struct b43_wldev *wldev = ssb_get_drvdata(dev); + struct b43_wl *wl = ssb_get_devtypedata(sdev); + struct b43_wldev *wldev = ssb_get_drvdata(sdev); /* We must cancel any work here before unregistering from ieee80211, * as the ieee80211 unreg will destroy the workqueue. */ @@ -5042,14 +5080,14 @@ static void b43_ssb_remove(struct ssb_device *dev) ieee80211_unregister_hw(wl->hw); } - b43_one_core_detach(dev); + b43_one_core_detach(wldev->dev); if (list_empty(&wl->devlist)) { b43_leds_unregister(wl); /* Last core on the chip unregistered. * We can destroy common struct b43_wl. */ - b43_wireless_exit(dev, wl); + b43_wireless_exit(wldev->dev, wl); } } @@ -5108,14 +5146,23 @@ static int __init b43_init(void) err = b43_sdio_init(); if (err) goto err_pcmcia_exit; - err = ssb_driver_register(&b43_ssb_driver); +#ifdef CONFIG_B43_BCMA + err = bcma_driver_register(&b43_bcma_driver); if (err) goto err_sdio_exit; +#endif + err = ssb_driver_register(&b43_ssb_driver); + if (err) + goto err_bcma_driver_exit; b43_print_driverinfo(); return err; +err_bcma_driver_exit: +#ifdef CONFIG_B43_BCMA + bcma_driver_unregister(&b43_bcma_driver); err_sdio_exit: +#endif b43_sdio_exit(); err_pcmcia_exit: b43_pcmcia_exit(); @@ -5127,6 +5174,9 @@ err_dfs_exit: static void __exit b43_exit(void) { ssb_driver_unregister(&b43_ssb_driver); +#ifdef CONFIG_B43_BCMA + bcma_driver_unregister(&b43_bcma_driver); +#endif b43_sdio_exit(); b43_pcmcia_exit(); b43_debugfs_exit(); diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h index a0d327f1318..e4ebce9be59 100644 --- a/drivers/net/wireless/b43/main.h +++ b/drivers/net/wireless/b43/main.h @@ -121,7 +121,7 @@ void b43_hf_write(struct b43_wldev *dev, u64 value); void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on); -void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags); +void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode); void b43_controller_restart(struct b43_wldev *dev, const char *reason); diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c index b01c8ced57c..73ace5552ba 100644 --- a/drivers/net/wireless/b43/phy_a.c +++ b/drivers/net/wireless/b43/phy_a.c @@ -265,7 +265,6 @@ static void hardware_pctl_init_aphy(struct b43_wldev *dev) void b43_phy_inita(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; /* This lowlevel A-PHY init is also called from G-PHY init. @@ -296,9 +295,9 @@ void b43_phy_inita(struct b43_wldev *dev) b43_radio_init2060(dev); - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - ((bus->boardinfo.type == SSB_BOARD_BU4306) || - (bus->boardinfo.type == SSB_BOARD_BU4309))) { + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + ((dev->dev->board_type == SSB_BOARD_BU4306) || + (dev->dev->board_type == SSB_BOARD_BU4309))) { ; //TODO: A PHY LO } @@ -311,7 +310,7 @@ void b43_phy_inita(struct b43_wldev *dev) } if ((phy->type == B43_PHYTYPE_G) && - (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { + (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)) { b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF); } } @@ -323,17 +322,17 @@ static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev) struct b43_phy_a *aphy = phy->a; s16 pab0, pab1, pab2; - pab0 = (s16) (dev->sdev->bus->sprom.pa1b0); - pab1 = (s16) (dev->sdev->bus->sprom.pa1b1); - pab2 = (s16) (dev->sdev->bus->sprom.pa1b2); + pab0 = (s16) (dev->dev->bus_sprom->pa1b0); + pab1 = (s16) (dev->dev->bus_sprom->pa1b1); + pab2 = (s16) (dev->dev->bus_sprom->pa1b2); if (pab0 != 0 && pab1 != 0 && pab2 != 0 && pab0 != -1 && pab1 != -1 && pab2 != -1) { /* The pabX values are set in SPROM. Use them. */ - if ((s8) dev->sdev->bus->sprom.itssi_a != 0 && - (s8) dev->sdev->bus->sprom.itssi_a != -1) + if ((s8) dev->dev->bus_sprom->itssi_a != 0 && + (s8) dev->dev->bus_sprom->itssi_a != -1) aphy->tgt_idle_tssi = - (s8) (dev->sdev->bus->sprom.itssi_a); + (s8) (dev->dev->bus_sprom->itssi_a); else aphy->tgt_idle_tssi = 62; aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index e46b2f4f092..425af28ea4e 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -168,7 +168,7 @@ void b43_phy_lock(struct b43_wldev *dev) B43_WARN_ON(dev->phy.phy_locked); dev->phy.phy_locked = 1; #endif - B43_WARN_ON(dev->sdev->id.revision < 3); + B43_WARN_ON(dev->dev->core_rev < 3); if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); @@ -180,7 +180,7 @@ void b43_phy_unlock(struct b43_wldev *dev) B43_WARN_ON(!dev->phy.phy_locked); dev->phy.phy_locked = 0; #endif - B43_WARN_ON(dev->sdev->id.revision < 3); + B43_WARN_ON(dev->dev->core_rev < 3); if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) b43_power_saving_ctl_bits(dev, 0); @@ -368,8 +368,8 @@ void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) /* The next check will be needed in two seconds, or later. */ phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); - if ((dev->sdev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (dev->sdev->bus->boardinfo.type == SSB_BOARD_BU4306)) + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type == SSB_BOARD_BU4306)) return; /* No software txpower adjustment needed */ result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c index 1758a282f91..83532d19347 100644 --- a/drivers/net/wireless/b43/phy_g.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -718,7 +718,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev) B43_WARN_ON(phy->type != B43_PHYTYPE_G); if (!phy->gmode || - !(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + !(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) { tmp16 = b43_nrssi_hw_read(dev, 0x20); if (tmp16 >= 0x20) tmp16 -= 0x40; @@ -1114,7 +1114,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, { struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; - struct ssb_sprom *sprom = &(dev->sdev->bus->sprom); + struct ssb_sprom *sprom = dev->dev->bus_sprom; if (!phy->gmode) return 0; @@ -1491,7 +1491,6 @@ static u16 b43_radio_init2050(struct b43_wldev *dev) static void b43_phy_initb5(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; u16 offset, value; @@ -1500,8 +1499,8 @@ static void b43_phy_initb5(struct b43_wldev *dev) if (phy->analog == 1) { b43_radio_set(dev, 0x007A, 0x0050); } - if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type != SSB_BOARD_BU4306)) { + if ((dev->dev->board_vendor != SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type != SSB_BOARD_BU4306)) { value = 0x2120; for (offset = 0x00A8; offset < 0x00C7; offset++) { b43_phy_write(dev, offset, value); @@ -1620,7 +1619,7 @@ static void b43_phy_initb6(struct b43_wldev *dev) b43_radio_write16(dev, 0x5A, 0x88); b43_radio_write16(dev, 0x5B, 0x6B); b43_radio_write16(dev, 0x5C, 0x0F); - if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_ALTIQ) { b43_radio_write16(dev, 0x5D, 0xFA); b43_radio_write16(dev, 0x5E, 0xD8); } else { @@ -1787,7 +1786,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev) b43_phy_set(dev, B43_PHY_RFOVER, 0x0100); b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xCFFF); - if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) { if (phy->rev >= 7) { b43_phy_set(dev, B43_PHY_RFOVER, 0x0800); b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x8000); @@ -1922,7 +1921,6 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) /* Initialize B/G PHY power control */ static void b43_phy_init_pctl(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy *phy = &dev->phy; struct b43_phy_g *gphy = phy->g; struct b43_rfatt old_rfatt; @@ -1931,8 +1929,8 @@ static void b43_phy_init_pctl(struct b43_wldev *dev) B43_WARN_ON(phy->type != B43_PHYTYPE_G); - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) + if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->board_type == SSB_BOARD_BU4306)) return; b43_phy_write(dev, 0x0028, 0x8018); @@ -2053,7 +2051,7 @@ static void b43_phy_initg(struct b43_wldev *dev) if (phy->rev >= 6) { b43_phy_maskset(dev, B43_PHY_CCK(0x36), 0x0FFF, (gphy->lo_control->tx_bias << 12)); } - if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); else b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); @@ -2066,7 +2064,7 @@ static void b43_phy_initg(struct b43_wldev *dev) b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); } - if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) { /* The specs state to update the NRSSI LT with * the value 0x7FFFFFFF here. I think that is some weird * compiler optimization in the original driver. @@ -2088,8 +2086,8 @@ static void b43_phy_initg(struct b43_wldev *dev) /* FIXME: The spec says in the following if, the 0 should be replaced 'if OFDM may not be used in the current locale' but OFDM is legal everywhere */ - if ((dev->sdev->bus->chip_id == 0x4306 - && dev->sdev->bus->chip_package == 2) || 0) { + if ((dev->dev->chip_id == 0x4306 + && dev->dev->chip_pkg == 2) || 0) { b43_phy_mask(dev, B43_PHY_CRS0, 0xBFFF); b43_phy_mask(dev, B43_PHY_OFDM(0xC3), 0x7FFF); } @@ -2105,7 +2103,7 @@ void b43_gphy_channel_switch(struct b43_wldev *dev, b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); if (channel == 14) { - if (dev->sdev->bus->sprom.country_code == + if (dev->dev->bus_sprom->country_code == SSB_SPROM1CCODE_JAPAN) b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ACPR); @@ -2136,17 +2134,17 @@ static void default_baseband_attenuation(struct b43_wldev *dev, static void default_radio_attenuation(struct b43_wldev *dev, struct b43_rfatt *rf) { - struct ssb_bus *bus = dev->sdev->bus; + struct b43_bus_dev *bdev = dev->dev; struct b43_phy *phy = &dev->phy; rf->with_padmix = 0; - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BCM4309G) { - if (bus->boardinfo.rev < 0x43) { + if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM && + dev->dev->board_type == SSB_BOARD_BCM4309G) { + if (dev->dev->board_rev < 0x43) { rf->att = 2; return; - } else if (bus->boardinfo.rev < 0x51) { + } else if (dev->dev->board_rev < 0x51) { rf->att = 3; return; } @@ -2172,21 +2170,21 @@ static void default_radio_attenuation(struct b43_wldev *dev, return; case 1: if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 3; - else if (bus->boardinfo.vendor == + else if (bdev->board_vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == + && bdev->board_type == SSB_BOARD_BU4306) rf->att = 3; else rf->att = 1; } else { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 7; else rf->att = 6; @@ -2194,16 +2192,16 @@ static void default_radio_attenuation(struct b43_wldev *dev, return; case 2: if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) + if (bdev->board_vendor == SSB_BOARDVENDOR_BCM + && bdev->board_type == SSB_BOARD_BCM4309G + && bdev->board_rev >= 30) rf->att = 3; - else if (bus->boardinfo.vendor == + else if (bdev->board_vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == + && bdev->board_type == SSB_BOARD_BU4306) rf->att = 5; - else if (bus->chip_id == 0x4320) + else if (bdev->chip_id == 0x4320) rf->att = 4; else rf->att = 3; @@ -2384,11 +2382,11 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) struct b43_phy_g *gphy = phy->g; s16 pab0, pab1, pab2; - pab0 = (s16) (dev->sdev->bus->sprom.pa0b0); - pab1 = (s16) (dev->sdev->bus->sprom.pa0b1); - pab2 = (s16) (dev->sdev->bus->sprom.pa0b2); + pab0 = (s16) (dev->dev->bus_sprom->pa0b0); + pab1 = (s16) (dev->dev->bus_sprom->pa0b1); + pab2 = (s16) (dev->dev->bus_sprom->pa0b2); - B43_WARN_ON((dev->sdev->bus->chip_id == 0x4301) && + B43_WARN_ON((dev->dev->chip_id == 0x4301) && (phy->radio_ver != 0x2050)); /* Not supported anymore */ gphy->dyn_tssi_tbl = 0; @@ -2396,10 +2394,10 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) if (pab0 != 0 && pab1 != 0 && pab2 != 0 && pab0 != -1 && pab1 != -1 && pab2 != -1) { /* The pabX values are set in SPROM. Use them. */ - if ((s8) dev->sdev->bus->sprom.itssi_bg != 0 && - (s8) dev->sdev->bus->sprom.itssi_bg != -1) { + if ((s8) dev->dev->bus_sprom->itssi_bg != 0 && + (s8) dev->dev->bus_sprom->itssi_bg != -1) { gphy->tgt_idle_tssi = - (s8) (dev->sdev->bus->sprom.itssi_bg); + (s8) (dev->dev->bus_sprom->itssi_bg); } else gphy->tgt_idle_tssi = 62; gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, @@ -2537,7 +2535,7 @@ static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev) b43_wireless_core_reset(dev, 0); b43_phy_initg(dev); phy->gmode = 1; - b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); + b43_wireless_core_reset(dev, 1); } return 0; @@ -2840,7 +2838,7 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) B43_TXCTL_TXMIX; rfatt += 2; bbatt += 2; - } else if (dev->sdev->bus->sprom. + } else if (dev->dev->bus_sprom-> boardflags_lo & B43_BFL_PACTRL) { bbatt += 4 * (rfatt - 2); @@ -2914,14 +2912,14 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); B43_WARN_ON(phy->type != B43_PHYTYPE_G); - max_pwr = dev->sdev->bus->sprom.maxpwr_bg; - if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + max_pwr = dev->dev->bus_sprom->maxpwr_bg; + if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) max_pwr -= 3; /* minus 0.75 */ if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { b43warn(dev->wl, "Invalid max-TX-power value in SPROM.\n"); max_pwr = INT_TO_Q52(20); /* fake it */ - dev->sdev->bus->sprom.maxpwr_bg = max_pwr; + dev->dev->bus_sprom->maxpwr_bg = max_pwr; } /* Get desired power (in Q5.2) */ @@ -3014,7 +3012,7 @@ static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) + if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) return; b43_mac_suspend(dev); diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 012c8da2f94..daec1d9e4a1 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -85,39 +85,39 @@ static void b43_lpphy_op_free(struct b43_wldev *dev) /* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */ static void lpphy_read_band_sprom(struct b43_wldev *dev) { + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy_lp *lpphy = dev->phy.lp; - struct ssb_bus *bus = dev->sdev->bus; u16 cckpo, maxpwr; u32 ofdmpo; int i; if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { - lpphy->tx_isolation_med_band = bus->sprom.tri2g; - lpphy->bx_arch = bus->sprom.bxa2g; - lpphy->rx_pwr_offset = bus->sprom.rxpo2g; - lpphy->rssi_vf = bus->sprom.rssismf2g; - lpphy->rssi_vc = bus->sprom.rssismc2g; - lpphy->rssi_gs = bus->sprom.rssisav2g; - lpphy->txpa[0] = bus->sprom.pa0b0; - lpphy->txpa[1] = bus->sprom.pa0b1; - lpphy->txpa[2] = bus->sprom.pa0b2; - maxpwr = bus->sprom.maxpwr_bg; + lpphy->tx_isolation_med_band = sprom->tri2g; + lpphy->bx_arch = sprom->bxa2g; + lpphy->rx_pwr_offset = sprom->rxpo2g; + lpphy->rssi_vf = sprom->rssismf2g; + lpphy->rssi_vc = sprom->rssismc2g; + lpphy->rssi_gs = sprom->rssisav2g; + lpphy->txpa[0] = sprom->pa0b0; + lpphy->txpa[1] = sprom->pa0b1; + lpphy->txpa[2] = sprom->pa0b2; + maxpwr = sprom->maxpwr_bg; lpphy->max_tx_pwr_med_band = maxpwr; - cckpo = bus->sprom.cck2gpo; + cckpo = sprom->cck2gpo; /* * We don't read SPROM's opo as specs say. On rev8 SPROMs * opo == ofdm2gpo and we don't know any SSB with LP-PHY * and SPROM rev below 8. */ - B43_WARN_ON(bus->sprom.revision < 8); - ofdmpo = bus->sprom.ofdm2gpo; + B43_WARN_ON(sprom->revision < 8); + ofdmpo = sprom->ofdm2gpo; if (cckpo) { for (i = 0; i < 4; i++) { lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2; ofdmpo >>= 4; } - ofdmpo = bus->sprom.ofdm2gpo; + ofdmpo = sprom->ofdm2gpo; for (i = 4; i < 15; i++) { lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2; @@ -131,39 +131,39 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev) lpphy->tx_max_rate[i] = maxpwr - ofdmpo; } } else { /* 5GHz */ - lpphy->tx_isolation_low_band = bus->sprom.tri5gl; - lpphy->tx_isolation_med_band = bus->sprom.tri5g; - lpphy->tx_isolation_hi_band = bus->sprom.tri5gh; - lpphy->bx_arch = bus->sprom.bxa5g; - lpphy->rx_pwr_offset = bus->sprom.rxpo5g; - lpphy->rssi_vf = bus->sprom.rssismf5g; - lpphy->rssi_vc = bus->sprom.rssismc5g; - lpphy->rssi_gs = bus->sprom.rssisav5g; - lpphy->txpa[0] = bus->sprom.pa1b0; - lpphy->txpa[1] = bus->sprom.pa1b1; - lpphy->txpa[2] = bus->sprom.pa1b2; - lpphy->txpal[0] = bus->sprom.pa1lob0; - lpphy->txpal[1] = bus->sprom.pa1lob1; - lpphy->txpal[2] = bus->sprom.pa1lob2; - lpphy->txpah[0] = bus->sprom.pa1hib0; - lpphy->txpah[1] = bus->sprom.pa1hib1; - lpphy->txpah[2] = bus->sprom.pa1hib2; - maxpwr = bus->sprom.maxpwr_al; - ofdmpo = bus->sprom.ofdm5glpo; + lpphy->tx_isolation_low_band = sprom->tri5gl; + lpphy->tx_isolation_med_band = sprom->tri5g; + lpphy->tx_isolation_hi_band = sprom->tri5gh; + lpphy->bx_arch = sprom->bxa5g; + lpphy->rx_pwr_offset = sprom->rxpo5g; + lpphy->rssi_vf = sprom->rssismf5g; + lpphy->rssi_vc = sprom->rssismc5g; + lpphy->rssi_gs = sprom->rssisav5g; + lpphy->txpa[0] = sprom->pa1b0; + lpphy->txpa[1] = sprom->pa1b1; + lpphy->txpa[2] = sprom->pa1b2; + lpphy->txpal[0] = sprom->pa1lob0; + lpphy->txpal[1] = sprom->pa1lob1; + lpphy->txpal[2] = sprom->pa1lob2; + lpphy->txpah[0] = sprom->pa1hib0; + lpphy->txpah[1] = sprom->pa1hib1; + lpphy->txpah[2] = sprom->pa1hib2; + maxpwr = sprom->maxpwr_al; + ofdmpo = sprom->ofdm5glpo; lpphy->max_tx_pwr_low_band = maxpwr; for (i = 4; i < 12; i++) { lpphy->tx_max_ratel[i] = maxpwr - (ofdmpo & 0xF) * 2; ofdmpo >>= 4; } - maxpwr = bus->sprom.maxpwr_a; - ofdmpo = bus->sprom.ofdm5gpo; + maxpwr = sprom->maxpwr_a; + ofdmpo = sprom->ofdm5gpo; lpphy->max_tx_pwr_med_band = maxpwr; for (i = 4; i < 12; i++) { lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2; ofdmpo >>= 4; } - maxpwr = bus->sprom.maxpwr_ah; - ofdmpo = bus->sprom.ofdm5ghpo; + maxpwr = sprom->maxpwr_ah; + ofdmpo = sprom->ofdm5ghpo; lpphy->max_tx_pwr_hi_band = maxpwr; for (i = 4; i < 12; i++) { lpphy->tx_max_rateh[i] = maxpwr - (ofdmpo & 0xF) * 2; @@ -214,7 +214,8 @@ static void lpphy_table_init(struct b43_wldev *dev) static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy_lp *lpphy = dev->phy.lp; u16 tmp, tmp2; @@ -242,9 +243,9 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00); b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB, 0xFF00, lpphy->rx_pwr_offset); - if ((bus->sprom.boardflags_lo & B43_BFL_FEM) && + if ((sprom->boardflags_lo & B43_BFL_FEM) && ((b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) || - (bus->sprom.boardflags_hi & B43_BFH_PAREF))) { + (sprom->boardflags_hi & B43_BFH_PAREF))) { ssb_pmu_set_ldo_voltage(&bus->chipco, LDO_PAREF, 0x28); ssb_pmu_set_ldo_paref(&bus->chipco, true); if (dev->phy.rev == 0) { @@ -260,7 +261,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) } tmp = lpphy->rssi_vf | lpphy->rssi_vc << 4 | 0xA000; b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, tmp); - if (bus->sprom.boardflags_hi & B43_BFH_RSSIINV) + if (sprom->boardflags_hi & B43_BFH_RSSIINV) b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x0AAA); else b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x02AA); @@ -268,7 +269,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_RX_RADIO_CTL, 0xFFF9, (lpphy->bx_arch << 1)); if (dev->phy.rev == 1 && - (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) { + (sprom->boardflags_hi & B43_BFH_FEM_BT)) { b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A); @@ -286,8 +287,8 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xFFC0, 0x000A); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00); } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ || - (bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) && - (bus->sprom.boardflags_lo & B43_BFL_FEM))) { + (dev->dev->board_type == 0x048A) || ((dev->phy.rev == 0) && + (sprom->boardflags_lo & B43_BFL_FEM))) { b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001); @@ -297,7 +298,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00); } else if (dev->phy.rev == 1 || - (bus->sprom.boardflags_lo & B43_BFL_FEM)) { + (sprom->boardflags_lo & B43_BFL_FEM)) { b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004); @@ -316,15 +317,15 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006); b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700); } - if (dev->phy.rev == 1 && (bus->sprom.boardflags_hi & B43_BFH_PAREF)) { + if (dev->phy.rev == 1 && (sprom->boardflags_hi & B43_BFH_PAREF)) { b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_5, B43_LPPHY_TR_LOOKUP_1); b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_6, B43_LPPHY_TR_LOOKUP_2); b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_7, B43_LPPHY_TR_LOOKUP_3); b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4); } - if ((bus->sprom.boardflags_hi & B43_BFH_FEM_BT) && - (bus->chip_id == 0x5354) && - (bus->chip_package == SSB_CHIPPACK_BCM4712S)) { + if ((sprom->boardflags_hi & B43_BFH_FEM_BT) && + (dev->dev->chip_id == 0x5354) && + (dev->dev->chip_pkg == SSB_CHIPPACK_BCM4712S)) { b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006); b43_phy_write(dev, B43_LPPHY_GPIO_SELECT, 0x0005); b43_phy_write(dev, B43_LPPHY_GPIO_OUTEN, 0xFFFF); @@ -412,7 +413,6 @@ static void lpphy_restore_dig_flt_state(struct b43_wldev *dev) static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; struct b43_phy_lp *lpphy = dev->phy.lp; b43_phy_write(dev, B43_LPPHY_AFE_DAC_CTL, 0x50); @@ -432,7 +432,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000); b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000); b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1); - if (bus->boardinfo.rev >= 0x18) { + if (dev->dev->board_rev >= 0x18) { b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC); b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14); } else { @@ -449,7 +449,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFC1F, 0xA0); b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xE0FF, 0x300); b43_phy_maskset(dev, B43_LPPHY_HIGAINDB, 0x00FF, 0x2A00); - if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) { + if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) { b43_phy_maskset(dev, B43_LPPHY_LOWGAINDB, 0x00FF, 0x2100); b43_phy_maskset(dev, B43_LPPHY_VERYLOWGAINDB, 0xFF00, 0xA); } else { @@ -467,7 +467,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12); b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000); - if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) { + if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) { b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0); b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40); } @@ -492,7 +492,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev) 0x2000 | ((u16)lpphy->rssi_gs << 10) | ((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf); - if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) { + if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) { b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C); b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800); b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400); @@ -519,7 +519,7 @@ struct b2062_freqdata { static void lpphy_2062_init(struct b43_wldev *dev) { struct b43_phy_lp *lpphy = dev->phy.lp; - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; u32 crystalfreq, tmp, ref; unsigned int i; const struct b2062_freqdata *fd = NULL; @@ -697,7 +697,7 @@ static void lpphy_radio_init(struct b43_wldev *dev) lpphy_sync_stx(dev); b43_phy_write(dev, B43_PHY_OFDM(0xF0), 0x5F80); b43_phy_write(dev, B43_PHY_OFDM(0xF1), 0); - if (dev->sdev->bus->chip_id == 0x4325) { + if (dev->dev->chip_id == 0x4325) { // TODO SSB PMU recalibration } } @@ -1289,7 +1289,7 @@ finish: static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000; u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF; int i; @@ -1840,7 +1840,6 @@ static void lpphy_papd_cal(struct b43_wldev *dev, struct lpphy_tx_gains gains, static void lpphy_papd_cal_txpwr(struct b43_wldev *dev) { struct b43_phy_lp *lpphy = dev->phy.lp; - struct ssb_bus *bus = dev->sdev->bus; struct lpphy_tx_gains gains, oldgains; int old_txpctl, old_afe_ovr, old_rf, old_bbmult; @@ -1854,7 +1853,7 @@ static void lpphy_papd_cal_txpwr(struct b43_wldev *dev) lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); - if (bus->chip_id == 0x4325 && bus->chip_rev == 0) + if (dev->dev->chip_id == 0x4325 && dev->dev->chip_rev == 0) lpphy_papd_cal(dev, gains, 0, 1, 30); else lpphy_papd_cal(dev, gains, 0, 1, 65); @@ -1870,7 +1869,6 @@ static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx, bool rx, bool pa, struct lpphy_tx_gains *gains) { struct b43_phy_lp *lpphy = dev->phy.lp; - struct ssb_bus *bus = dev->sdev->bus; const struct lpphy_rx_iq_comp *iqcomp = NULL; struct lpphy_tx_gains nogains, oldgains; u16 tmp; @@ -1879,7 +1877,7 @@ static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx, memset(&nogains, 0, sizeof(nogains)); memset(&oldgains, 0, sizeof(oldgains)); - if (bus->chip_id == 0x5354) { + if (dev->dev->chip_id == 0x5354) { for (i = 0; i < ARRAY_SIZE(lpphy_5354_iq_table); i++) { if (lpphy_5354_iq_table[i].chan == lpphy->channel) { iqcomp = &lpphy_5354_iq_table[i]; @@ -2408,11 +2406,9 @@ static const struct b206x_channel b2063_chantbl[] = { static void lpphy_b2062_reset_pll_bias(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; - b43_radio_write(dev, B2062_S_RFPLL_CTL2, 0xFF); udelay(20); - if (bus->chip_id == 0x5354) { + if (dev->dev->chip_id == 0x5354) { b43_radio_write(dev, B2062_N_COMM1, 4); b43_radio_write(dev, B2062_S_RFPLL_CTL2, 4); } else { @@ -2432,7 +2428,7 @@ static int lpphy_b2062_tune(struct b43_wldev *dev, unsigned int channel) { struct b43_phy_lp *lpphy = dev->phy.lp; - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; const struct b206x_channel *chandata = NULL; u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000; u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9; @@ -2522,7 +2518,7 @@ static void lpphy_b2063_vco_calib(struct b43_wldev *dev) static int lpphy_b2063_tune(struct b43_wldev *dev, unsigned int channel) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; static const struct b206x_channel *chandata = NULL; u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000; @@ -2670,6 +2666,11 @@ static int b43_lpphy_op_init(struct b43_wldev *dev) { int err; + if (dev->dev->bus_type != B43_BUS_SSB) { + b43err(dev->wl, "LP-PHY is supported only on SSB!\n"); + return -EOPNOTSUPP; + } + lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs? lpphy_baseband_init(dev); lpphy_radio_init(dev); diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 05960ddde24..ad14f3b428c 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -299,7 +299,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable) static void b43_nphy_tx_power_fix(struct b43_wldev *dev) { struct b43_phy_n *nphy = dev->phy.n; - struct ssb_sprom *sprom = &(dev->sdev->bus->sprom); + struct ssb_sprom *sprom = dev->dev->bus_sprom; u8 txpi[2], bbmult, i; u16 tmp, radio_gain, dac_gain; @@ -423,16 +423,15 @@ static void b43_radio_init2055_pre(struct b43_wldev *dev) static void b43_radio_init2055_post(struct b43_wldev *dev) { struct b43_phy_n *nphy = dev->phy.n; - struct ssb_sprom *sprom = &(dev->sdev->bus->sprom); - struct ssb_boardinfo *binfo = &(dev->sdev->bus->boardinfo); + struct ssb_sprom *sprom = dev->dev->bus_sprom; int i; u16 val; bool workaround = false; if (sprom->revision < 4) - workaround = (binfo->vendor != PCI_VENDOR_ID_BROADCOM && - binfo->type == 0x46D && - binfo->rev >= 0x41); + workaround = (dev->dev->board_vendor != PCI_VENDOR_ID_BROADCOM + && dev->dev->board_type == 0x46D + && dev->dev->board_rev >= 0x41); else workaround = !(sprom->boardflags2_lo & B43_BFL2_RXBB_INT_REG_DIS); @@ -983,7 +982,7 @@ static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val) { u16 tmp; - if (dev->sdev->id.revision == 16) + if (dev->dev->core_rev == 16) b43_mac_suspend(dev); tmp = b43_phy_read(dev, B43_NPHY_CLASSCTL); @@ -993,7 +992,7 @@ static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val) tmp |= (val & mask); b43_phy_maskset(dev, B43_NPHY_CLASSCTL, 0xFFF8, tmp); - if (dev->sdev->id.revision == 16) + if (dev->dev->core_rev == 16) b43_mac_enable(dev); return tmp; @@ -1168,7 +1167,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev) static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev) { struct b43_phy_n *nphy = dev->phy.n; - struct ssb_sprom *sprom = &(dev->sdev->bus->sprom); + struct ssb_sprom *sprom = dev->dev->bus_sprom; /* PHY rev 0, 1, 2 */ u8 i, j; @@ -1373,7 +1372,7 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev) /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */ static void b43_nphy_workarounds(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; struct b43_phy_n *nphy = phy->n; @@ -1443,9 +1442,9 @@ static void b43_nphy_workarounds(struct b43_wldev *dev) /* N PHY WAR TX Chain Update with hw_phytxchain as argument */ - if ((bus->sprom.boardflags2_lo & B43_BFL2_APLL_WAR && + if ((sprom->boardflags2_lo & B43_BFL2_APLL_WAR && b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) || - (bus->sprom.boardflags2_lo & B43_BFL2_GPLL_WAR && + (sprom->boardflags2_lo & B43_BFL2_GPLL_WAR && b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) tmp32 = 0x00088888; else @@ -1503,8 +1502,8 @@ static void b43_nphy_workarounds(struct b43_wldev *dev) b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8); b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301); - if (bus->sprom.boardflags2_lo & 0x100 && - bus->boardinfo.type == 0x8B) { + if (sprom->boardflags2_lo & 0x100 && + dev->dev->board_type == 0x8B) { delays1[0] = 0x1; delays1[5] = 0x14; } @@ -3586,7 +3585,7 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask) */ int b43_phy_initn(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; struct b43_phy_n *nphy = phy->n; u8 tx_pwr_state; @@ -3599,7 +3598,7 @@ int b43_phy_initn(struct b43_wldev *dev) bool do_cal = false; if ((dev->phy.rev >= 3) && - (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) && + (sprom->boardflags_lo & B43_BFL_EXTLNA) && (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) { chipco_set32(&dev->sdev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40); } @@ -3639,9 +3638,9 @@ int b43_phy_initn(struct b43_wldev *dev) b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20); b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20); - if (bus->sprom.boardflags2_lo & 0x100 || - (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE && - bus->boardinfo.type == 0x8B)) + if (sprom->boardflags2_lo & 0x100 || + (dev->dev->board_vendor == PCI_VENDOR_ID_APPLE && + dev->dev->board_type == 0x8B)) b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0); else b43_phy_write(dev, B43_NPHY_TXREALFD, 0xB8); diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 72ab94df756..44da620d9cc 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -111,7 +111,7 @@ static u16 index_to_pioqueue_base(struct b43_wldev *dev, B43_MMIO_PIO11_BASE5, }; - if (dev->sdev->id.revision >= 11) { + if (dev->dev->core_rev >= 11) { B43_WARN_ON(index >= ARRAY_SIZE(bases_rev11)); return bases_rev11[index]; } @@ -121,14 +121,14 @@ static u16 index_to_pioqueue_base(struct b43_wldev *dev, static u16 pio_txqueue_offset(struct b43_wldev *dev) { - if (dev->sdev->id.revision >= 11) + if (dev->dev->core_rev >= 11) return 0x18; return 0; } static u16 pio_rxqueue_offset(struct b43_wldev *dev) { - if (dev->sdev->id.revision >= 11) + if (dev->dev->core_rev >= 11) return 0x38; return 8; } @@ -144,7 +144,7 @@ static struct b43_pio_txqueue *b43_setup_pioqueue_tx(struct b43_wldev *dev, if (!q) return NULL; q->dev = dev; - q->rev = dev->sdev->id.revision; + q->rev = dev->dev->core_rev; q->mmio_base = index_to_pioqueue_base(dev, index) + pio_txqueue_offset(dev); q->index = index; @@ -178,7 +178,7 @@ static struct b43_pio_rxqueue *b43_setup_pioqueue_rx(struct b43_wldev *dev, if (!q) return NULL; q->dev = dev; - q->rev = dev->sdev->id.revision; + q->rev = dev->dev->core_rev; q->mmio_base = index_to_pioqueue_base(dev, index) + pio_rxqueue_offset(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index a617efe3828..59c3afe047a 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -37,17 +37,16 @@ void b43_rfkill_poll(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - struct ssb_bus *bus = dev->sdev->bus; bool enabled; bool brought_up = false; mutex_lock(&wl->mutex); if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { - if (ssb_bus_powerup(bus, 0)) { + if (b43_bus_powerup(dev, 0)) { mutex_unlock(&wl->mutex); return; } - ssb_device_enable(dev->sdev, 0); + b43_device_enable(dev, 0); brought_up = true; } @@ -63,8 +62,8 @@ void b43_rfkill_poll(struct ieee80211_hw *hw) } if (brought_up) { - ssb_device_disable(dev->sdev, 0); - ssb_bus_may_powerdown(bus); + b43_device_disable(dev, 0); + b43_bus_may_powerdown(dev); } mutex_unlock(&wl->mutex); diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c index 808e25b7970..e6c733d37c9 100644 --- a/drivers/net/wireless/b43/sdio.c +++ b/drivers/net/wireless/b43/sdio.c @@ -66,7 +66,7 @@ static void b43_sdio_interrupt_dispatcher(struct sdio_func *func) int b43_sdio_request_irq(struct b43_wldev *dev, void (*handler)(struct b43_wldev *dev)) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; struct sdio_func *func = bus->host_sdio; struct b43_sdio *sdio = sdio_get_drvdata(func); int err; @@ -82,7 +82,7 @@ int b43_sdio_request_irq(struct b43_wldev *dev, void b43_sdio_free_irq(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_bus *bus = dev->dev->sdev->bus; struct sdio_func *func = bus->host_sdio; struct b43_sdio *sdio = sdio_get_drvdata(func); diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c index 57af619725c..f1ae4e05a32 100644 --- a/drivers/net/wireless/b43/sysfs.c +++ b/drivers/net/wireless/b43/sysfs.c @@ -140,7 +140,7 @@ static DEVICE_ATTR(interference, 0644, int b43_sysfs_register(struct b43_wldev *wldev) { - struct device *dev = wldev->sdev->dev; + struct device *dev = wldev->dev->dev; B43_WARN_ON(b43_status(wldev) != B43_STAT_INITIALIZED); @@ -149,7 +149,7 @@ int b43_sysfs_register(struct b43_wldev *wldev) void b43_sysfs_unregister(struct b43_wldev *wldev) { - struct device *dev = wldev->sdev->dev; + struct device *dev = wldev->dev->dev; device_remove_file(dev, &dev_attr_interference); } diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c index 59df3c64af6..6748c5a196e 100644 --- a/drivers/net/wireless/b43/tables_lpphy.c +++ b/drivers/net/wireless/b43/tables_lpphy.c @@ -2304,7 +2304,6 @@ void lpphy_rev0_1_table_init(struct b43_wldev *dev) void lpphy_rev2plus_table_init(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; int i; B43_WARN_ON(dev->phy.rev < 2); @@ -2341,7 +2340,7 @@ void lpphy_rev2plus_table_init(struct b43_wldev *dev) b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0), ARRAY_SIZE(lpphy_papd_mult_table), lpphy_papd_mult_table); - if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) { + if ((dev->dev->chip_id == 0x4325) && (dev->dev->chip_rev == 0)) { b43_lptab_write_bulk(dev, B43_LPTAB32(13, 0), ARRAY_SIZE(lpphy_a0_gain_idx_table), lpphy_a0_gain_idx_table); b43_lptab_write_bulk(dev, B43_LPTAB16(14, 0), @@ -2416,12 +2415,12 @@ void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count, void lpphy_init_tx_gain_table(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_sprom *sprom = dev->dev->bus_sprom; switch (dev->phy.rev) { case 0: - if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) || - (bus->sprom.boardflags_lo & B43_BFL_HGPA)) + if ((sprom->boardflags_hi & B43_BFH_NOPA) || + (sprom->boardflags_lo & B43_BFL_HGPA)) lpphy_write_gain_table_bulk(dev, 0, 128, lpphy_rev0_nopa_tx_gain_table); else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) @@ -2432,8 +2431,8 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev) lpphy_rev0_5ghz_tx_gain_table); break; case 1: - if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) || - (bus->sprom.boardflags_lo & B43_BFL_HGPA)) + if ((sprom->boardflags_hi & B43_BFH_NOPA) || + (sprom->boardflags_lo & B43_BFL_HGPA)) lpphy_write_gain_table_bulk(dev, 0, 128, lpphy_rev1_nopa_tx_gain_table); else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) @@ -2444,7 +2443,7 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev) lpphy_rev1_5ghz_tx_gain_table); break; default: - if (bus->sprom.boardflags_hi & B43_BFH_NOPA) + if (sprom->boardflags_hi & B43_BFH_NOPA) lpphy_write_gain_table_bulk(dev, 0, 128, lpphy_rev2_nopa_tx_gain_table); else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index 8f4db448ec3..5d00d0eaf2e 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -458,17 +458,15 @@ static void b43_wa_rssi_adc(struct b43_wldev *dev) static void b43_wa_boards_a(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; - - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BU4306 && - bus->boardinfo.rev < 0x30) { + if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM && + dev->dev->board_type == SSB_BOARD_BU4306 && + dev->dev->board_rev < 0x30) { b43_phy_write(dev, 0x0010, 0xE000); b43_phy_write(dev, 0x0013, 0x0140); b43_phy_write(dev, 0x0014, 0x0280); } else { - if (bus->boardinfo.type == SSB_BOARD_MP4318 && - bus->boardinfo.rev < 0x20) { + if (dev->dev->board_type == SSB_BOARD_MP4318 && + dev->dev->board_rev < 0x20) { b43_phy_write(dev, 0x0013, 0x0210); b43_phy_write(dev, 0x0014, 0x0840); } else { @@ -486,19 +484,19 @@ static void b43_wa_boards_a(struct b43_wldev *dev) static void b43_wa_boards_g(struct b43_wldev *dev) { - struct ssb_bus *bus = dev->sdev->bus; + struct ssb_sprom *sprom = dev->dev->bus_sprom; struct b43_phy *phy = &dev->phy; - if (bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM || - bus->boardinfo.type != SSB_BOARD_BU4306 || - bus->boardinfo.rev != 0x17) { + if (dev->dev->board_vendor != SSB_BOARDVENDOR_BCM || + dev->dev->board_type != SSB_BOARD_BU4306 || + dev->dev->board_rev != 0x17) { if (phy->rev < 2) { b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX_R1, 1, 0x0002); b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX_R1, 2, 0x0001); } else { b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002); b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001); - if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) && + if ((sprom->boardflags_lo & B43_BFL_EXTLNA) && (phy->rev >= 7)) { b43_phy_mask(dev, B43_PHY_EXTG(0x11), 0xF7FF); b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 0x0020, 0x0001); @@ -510,7 +508,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev) } } } - if (bus->sprom.boardflags_lo & B43_BFL_FEM) { + if (sprom->boardflags_lo & B43_BFL_FEM) { b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120); b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480); } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index c8f99aebe01..488b898418a 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -547,7 +547,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, else tmp -= 3; } else { - if (dev->sdev->bus->sprom. + if (dev->dev->bus_sprom-> boardflags_lo & B43_BFL_RSSI) { if (in_rssi > 63) in_rssi = 63; |