diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 7ce8663fdb7..1d7248cd196 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1369,6 +1369,8 @@ void iwl_apm_stop(struct iwl_priv *priv) { unsigned long flags; + IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n"); + iwl_apm_stop_master(priv); spin_lock_irqsave(&priv->lock, flags); @@ -1382,6 +1384,118 @@ void iwl_apm_stop(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_apm_stop); + +/* + * Start up NIC's basic functionality after it has been reset + * (e.g. after platform boot, or shutdown via iwl_apm_stop()) + * NOTE: This does not load uCode nor start the embedded processor + */ +int iwl_apm_init(struct iwl_priv *priv) +{ + int ret = 0; + u16 lctl; + + IWL_DEBUG_INFO(priv, "Init card's basic functions\n"); + + /* + * Use "set_bit" below rather than "write", to preserve any hardware + * bits already set by default after reset. + */ + + /* Disable L0S exit timer (platform NMI Work/Around) */ + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + /* + * Disable L0s without affecting L1; + * don't wait for ICH L0s (ICH bug W/A) + */ + iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, + CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + + /* Set FH wait threshold to maximum (HW error during stress W/A) */ + iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); + + /* + * Enable HAP INTA (interrupt from management bus) to + * wake device's PCI Express link L1a -> L0s + * NOTE: This is no-op for 3945 (non-existant bit) + */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); + + /* + * HW bug W/A - costs negligible power consumption ... + * Check if BIOS (or OS) enabled L1-ASPM on this device + */ + if (priv->cfg->set_l0s) { + lctl = iwl_pcie_link_ctl(priv); + if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == + PCI_CFG_LINK_CTRL_VAL_L1_EN) { + /* L1-ASPM enabled; disable(!) L0S */ + iwl_set_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n"); + } else { + /* L1-ASPM disabled; enable(!) L0S */ + iwl_clear_bit(priv, CSR_GIO_REG, + CSR_GIO_REG_VAL_L0S_ENABLED); + IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n"); + } + } + + /* Configure analog phase-lock-loop before activating to D0A */ + if (priv->cfg->pll_cfg_val) + iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val); + + /* + * Set "initialization complete" bit to move adapter from + * D0U* --> D0A* (powered-up active) state. + */ + iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* + * Wait for clock stabilization; once stabilized, access to + * device-internal resources is supported, e.g. iwl_write_prph() + * and accesses to uCode SRAM. + */ + ret = iwl_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (ret < 0) { + IWL_DEBUG_INFO(priv, "Failed to init the card\n"); + goto out; + } + + /* + * Enable DMA and BSM (if used) clocks, wait for them to stabilize. + * BSM (Boostrap State Machine) is only in 3945 and 4965; + * later devices (i.e. 5000 and later) have non-volatile SRAM, + * and don't need BSM to restore data after power-saving sleep. + * + * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits + * do not disable clocks. This preserves any hardware bits already + * set by default in "CLK_CTRL_REG" after reset. + */ + if (priv->cfg->use_bsm) + iwl_write_prph(priv, APMG_CLK_EN_REG, + APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); + else + iwl_write_prph(priv, APMG_CLK_EN_REG, + APMG_CLK_VAL_DMA_CLK_RQT); + udelay(20); + + /* Disable L1-Active */ + iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, + APMG_PCIDEV_STT_VAL_L1_ACT_DIS); + +out: + return ret; +} +EXPORT_SYMBOL(iwl_apm_init); + + + void iwl_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *total_flags, |