summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c279
1 files changed, 205 insertions, 74 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7b70312181d..0bc27e05901 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -41,6 +41,21 @@ int pci_domains_supported = 1;
unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
+#define DEFAULT_HOTPLUG_IO_SIZE (256)
+#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
+/* pci=hpmemsize=nnM,hpiosize=nn can override this */
+unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
+unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
+
+/*
+ * The default CLS is used if arch didn't set CLS explicitly and not
+ * all pci devices agree on the same value. Arch can override either
+ * the dfl or actual value as it sees fit. Don't forget this is
+ * measured in 32-bit words, not bytes.
+ */
+u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2;
+u8 pci_cache_line_size;
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -367,8 +382,12 @@ pci_find_parent_resource(const struct pci_dev *dev, struct resource *res)
continue; /* Wrong type */
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH))
return r; /* Exact match */
- if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH))
- best = r; /* Approximating prefetchable by non-prefetchable */
+ /* We can't insert a non-prefetch resource inside a prefetchable parent .. */
+ if (r->flags & IORESOURCE_PREFETCH)
+ continue;
+ /* .. but we can put a prefetchable resource inside a non-prefetchable one */
+ if (!best)
+ best = r;
}
return best;
}
@@ -507,7 +526,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
- dev->current_state = state;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ if (dev->current_state != state && printk_ratelimit())
+ dev_info(&dev->dev, "Refused to change power state, "
+ "currently in D%d\n", dev->current_state);
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
@@ -718,8 +741,8 @@ static int pci_save_pcie_state(struct pci_dev *dev)
u16 *cap;
u16 flags;
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos <= 0)
+ pos = pci_pcie_cap(dev);
+ if (!pos)
return 0;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
@@ -827,7 +850,7 @@ pci_save_state(struct pci_dev *dev)
int i;
/* XXX: 100% dword access ok here? */
for (i = 0; i < 16; i++)
- pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+ pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
dev->state_saved = true;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
@@ -848,6 +871,7 @@ pci_restore_state(struct pci_dev *dev)
if (!dev->state_saved)
return 0;
+
/* PCI Express register must be restored first */
pci_restore_pcie_state(dev);
@@ -869,6 +893,8 @@ pci_restore_state(struct pci_dev *dev)
pci_restore_msi_state(dev);
pci_restore_iov_state(dev);
+ dev->state_saved = false;
+
return 0;
}
@@ -1189,7 +1215,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
- dev_printk(KERN_INFO, &dev->dev, "PME# %s\n",
+ dev_printk(KERN_DEBUG, &dev->dev, "PME# %s\n",
enable ? "enabled" : "disabled");
}
@@ -1214,30 +1240,40 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
*/
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
{
- int error = 0;
- bool pme_done = false;
+ int ret = 0;
if (enable && !device_may_wakeup(&dev->dev))
return -EINVAL;
+ /* Don't do the same thing twice in a row for one device. */
+ if (!!enable == !!dev->wakeup_prepared)
+ return 0;
+
/*
* According to "PCI System Architecture" 4th ed. by Tom Shanley & Don
* Anderson we should be doing PME# wake enable followed by ACPI wake
* enable. To disable wake-up we call the platform first, for symmetry.
*/
- if (!enable && platform_pci_can_wakeup(dev))
- error = platform_pci_sleep_wake(dev, false);
-
- if (!enable || pci_pme_capable(dev, state)) {
- pci_pme_active(dev, enable);
- pme_done = true;
- }
+ if (enable) {
+ int error;
- if (enable && platform_pci_can_wakeup(dev))
+ if (pci_pme_capable(dev, state))
+ pci_pme_active(dev, true);
+ else
+ ret = 1;
error = platform_pci_sleep_wake(dev, true);
+ if (ret)
+ ret = error;
+ if (!ret)
+ dev->wakeup_prepared = true;
+ } else {
+ platform_pci_sleep_wake(dev, false);
+ pci_pme_active(dev, false);
+ dev->wakeup_prepared = false;
+ }
- return pme_done ? 0 : error;
+ return ret;
}
/**
@@ -1356,6 +1392,7 @@ void pci_pm_init(struct pci_dev *dev)
int pm;
u16 pmc;
+ dev->wakeup_prepared = false;
dev->pm_cap = 0;
/* find PCI PM capability in list */
@@ -1389,7 +1426,8 @@ void pci_pm_init(struct pci_dev *dev)
pmc &= PCI_PM_CAP_PME_MASK;
if (pmc) {
- dev_info(&dev->dev, "PME# supported from%s%s%s%s%s\n",
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "PME# supported from%s%s%s%s%s\n",
(pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
(pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
(pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
@@ -1486,7 +1524,7 @@ void pci_enable_ari(struct pci_dev *dev)
u16 ctrl;
struct pci_dev *bridge;
- if (!dev->is_pcie || dev->devfn)
+ if (!pci_is_pcie(dev) || dev->devfn)
return;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
@@ -1494,10 +1532,10 @@ void pci_enable_ari(struct pci_dev *dev)
return;
bridge = dev->bus->self;
- if (!bridge || !bridge->is_pcie)
+ if (!bridge || !pci_is_pcie(bridge))
return;
- pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+ pos = pci_pcie_cap(bridge);
if (!pos)
return;
@@ -1512,6 +1550,54 @@ void pci_enable_ari(struct pci_dev *dev)
bridge->ari_enabled = 1;
}
+static int pci_acs_enable;
+
+/**
+ * pci_request_acs - ask for ACS to be enabled if supported
+ */
+void pci_request_acs(void)
+{
+ pci_acs_enable = 1;
+}
+
+/**
+ * pci_enable_acs - enable ACS if hardware support it
+ * @dev: the PCI device
+ */
+void pci_enable_acs(struct pci_dev *dev)
+{
+ int pos;
+ u16 cap;
+ u16 ctrl;
+
+ if (!pci_acs_enable)
+ return;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_ACS_CAP, &cap);
+ pci_read_config_word(dev, pos + PCI_ACS_CTRL, &ctrl);
+
+ /* Source Validation */
+ ctrl |= (cap & PCI_ACS_SV);
+
+ /* P2P Request Redirect */
+ ctrl |= (cap & PCI_ACS_RR);
+
+ /* P2P Completion Redirect */
+ ctrl |= (cap & PCI_ACS_CR);
+
+ /* Upstream Forwarding */
+ ctrl |= (cap & PCI_ACS_UF);
+
+ pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
+}
+
/**
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
* @dev: the PCI device
@@ -1645,9 +1731,7 @@ static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_n
return 0;
err_out:
- dev_warn(&pdev->dev, "BAR %d: can't reserve %s region %pR\n",
- bar,
- pci_resource_flags(pdev, bar) & IORESOURCE_IO ? "I/O" : "mem",
+ dev_warn(&pdev->dev, "BAR %d: can't reserve %pR\n", bar,
&pdev->resource[bar]);
return -EBUSY;
}
@@ -1842,31 +1926,6 @@ void pci_clear_master(struct pci_dev *dev)
__pci_set_master(dev, false);
}
-#ifdef PCI_DISABLE_MWI
-int pci_set_mwi(struct pci_dev *dev)
-{
- return 0;
-}
-
-int pci_try_set_mwi(struct pci_dev *dev)
-{
- return 0;
-}
-
-void pci_clear_mwi(struct pci_dev *dev)
-{
-}
-
-#else
-
-#ifndef PCI_CACHE_LINE_BYTES
-#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
-#endif
-
-/* This can be overridden by arch code. */
-/* Don't forget this is measured in 32-bit words, not bytes */
-u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
-
/**
* pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
* @dev: the PCI device for which MWI is to be enabled
@@ -1877,13 +1936,12 @@ u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
-static int
-pci_set_cacheline_size(struct pci_dev *dev)
+int pci_set_cacheline_size(struct pci_dev *dev)
{
u8 cacheline_size;
if (!pci_cache_line_size)
- return -EINVAL; /* The system doesn't support MWI. */
+ return -EINVAL;
/* Validate current setting: the PCI_CACHE_LINE_SIZE must be
equal to or multiple of the right value. */
@@ -1904,6 +1962,24 @@ pci_set_cacheline_size(struct pci_dev *dev)
return -EINVAL;
}
+EXPORT_SYMBOL_GPL(pci_set_cacheline_size);
+
+#ifdef PCI_DISABLE_MWI
+int pci_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
+void pci_clear_mwi(struct pci_dev *dev)
+{
+}
+
+#else
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
@@ -2038,6 +2114,7 @@ pci_set_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
dev->dma_mask = mask;
+ dev_dbg(&dev->dev, "using %dbit DMA mask\n", fls64(mask));
return 0;
}
@@ -2049,6 +2126,7 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
dev->dev.coherent_dma_mask = mask;
+ dev_dbg(&dev->dev, "using %dbit consistent DMA mask\n", fls64(mask));
return 0;
}
@@ -2075,9 +2153,9 @@ static int pcie_flr(struct pci_dev *dev, int probe)
int i;
int pos;
u32 cap;
- u16 status;
+ u16 status, control;
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ pos = pci_pcie_cap(dev);
if (!pos)
return -ENOTTY;
@@ -2102,8 +2180,10 @@ static int pcie_flr(struct pci_dev *dev, int probe)
"proceeding with reset anyway\n");
clear:
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
- PCI_EXP_DEVCTL_BCR_FLR);
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &control);
+ control |= PCI_EXP_DEVCTL_BCR_FLR;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, control);
+
msleep(100);
return 0;
@@ -2262,6 +2342,22 @@ int __pci_reset_function(struct pci_dev *dev)
EXPORT_SYMBOL_GPL(__pci_reset_function);
/**
+ * pci_probe_reset_function - check whether the device can be safely reset
+ * @dev: PCI device to reset
+ *
+ * Some devices allow an individual function to be reset without affecting
+ * other functions in the same device. The PCI device must be responsive
+ * to PCI config space in order to use this function.
+ *
+ * Returns 0 if the device function can be reset or negative if the
+ * device doesn't support resetting a single function.
+ */
+int pci_probe_reset_function(struct pci_dev *dev)
+{
+ return pci_dev_reset(dev, 1);
+}
+
+/**
* pci_reset_function - quiesce and reset a PCI device function
* @dev: PCI device to reset
*
@@ -2410,7 +2506,7 @@ int pcie_get_readrq(struct pci_dev *dev)
int ret, cap;
u16 ctl;
- cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ cap = pci_pcie_cap(dev);
if (!cap)
return -EINVAL;
@@ -2440,7 +2536,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)
v = (ffs(rq) - 8) << 12;
- cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ cap = pci_pcie_cap(dev);
if (!cap)
goto out;
@@ -2500,13 +2596,57 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
return reg;
}
- dev_err(&dev->dev, "BAR: invalid resource #%d\n", resno);
+ dev_err(&dev->dev, "BAR %d: invalid resource\n", resno);
+ return 0;
+}
+
+/**
+ * pci_set_vga_state - set VGA decode state on device and parents if requested
+ * @dev: the PCI device
+ * @decode: true = enable decoding, false = disable decoding
+ * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge: traverse ancestors and change bridges
+ */
+int pci_set_vga_state(struct pci_dev *dev, bool decode,
+ unsigned int command_bits, bool change_bridge)
+{
+ struct pci_bus *bus;
+ struct pci_dev *bridge;
+ u16 cmd;
+
+ WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if (decode == true)
+ cmd |= command_bits;
+ else
+ cmd &= ~command_bits;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ if (change_bridge == false)
+ return 0;
+
+ bus = dev->bus;
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &cmd);
+ if (decode == true)
+ cmd |= PCI_BRIDGE_CTL_VGA;
+ else
+ cmd &= ~PCI_BRIDGE_CTL_VGA;
+ pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
+ cmd);
+ }
+ bus = bus->parent;
+ }
return 0;
}
#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
-spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(resource_alignment_lock);
/**
* pci_specified_resource_alignment - get resource alignment specified by user.
@@ -2639,17 +2779,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
return 1;
}
-static int __devinit pci_init(void)
-{
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- pci_fixup_device(pci_fixup_final, dev);
- }
-
- return 0;
-}
-
static int __init pci_setup(char *str)
{
while (str) {
@@ -2672,6 +2801,10 @@ static int __init pci_setup(char *str)
strlen(str + 19));
} else if (!strncmp(str, "ecrc=", 5)) {
pcie_ecrc_get_policy(str + 5);
+ } else if (!strncmp(str, "hpiosize=", 9)) {
+ pci_hotplug_io_size = memparse(str + 9, &str);
+ } else if (!strncmp(str, "hpmemsize=", 10)) {
+ pci_hotplug_mem_size = memparse(str + 10, &str);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
@@ -2683,8 +2816,6 @@ static int __init pci_setup(char *str)
}
early_param("pci", pci_setup);
-device_initcall(pci_init);
-
EXPORT_SYMBOL(pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_io);
EXPORT_SYMBOL(pci_enable_device_mem);
generated by cgit v1.2.3 (git 2.39.1) at 2025-11-27 02:32:45 +0000