diff options
Diffstat (limited to 'drivers/platform/x86')
-rw-r--r-- | drivers/platform/x86/Kconfig | 48 | ||||
-rw-r--r-- | drivers/platform/x86/Makefile | 3 | ||||
-rw-r--r-- | drivers/platform/x86/acer-wmi.c | 30 | ||||
-rw-r--r-- | drivers/platform/x86/amilo-rfkill.c | 173 | ||||
-rw-r--r-- | drivers/platform/x86/fujitsu-tablet.c | 478 | ||||
-rw-r--r-- | drivers/platform/x86/hdaps.c | 4 | ||||
-rw-r--r-- | drivers/platform/x86/ibm_rtl.c | 15 | ||||
-rw-r--r-- | drivers/platform/x86/intel_ips.c | 15 | ||||
-rw-r--r-- | drivers/platform/x86/intel_mid_powerbtn.c | 32 | ||||
-rw-r--r-- | drivers/platform/x86/intel_mid_thermal.c | 47 | ||||
-rw-r--r-- | drivers/platform/x86/intel_rar_register.c | 669 | ||||
-rw-r--r-- | drivers/platform/x86/intel_scu_ipc.c | 208 | ||||
-rw-r--r-- | drivers/platform/x86/intel_scu_ipcutil.c | 32 | ||||
-rw-r--r-- | drivers/platform/x86/panasonic-laptop.c | 4 |
14 files changed, 796 insertions, 962 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f995e6e2f78..2dc02c972ce 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -143,6 +143,30 @@ config FUJITSU_LAPTOP_DEBUG If you are not sure, say N here. +config FUJITSU_TABLET + tristate "Fujitsu Tablet Extras" + depends on ACPI + depends on INPUT + ---help--- + This is a driver for tablets built by Fujitsu: + + * Lifebook P1510/P1610/P1620/Txxxx + * Stylistic ST5xxx + * Possibly other Fujitsu tablet models + + It adds support for the panel buttons, docking station detection, + tablet/notebook mode detection for convertible and + orientation detection for docked slates. + + If you have a Fujitsu convertible or slate, say Y or M here. + +config AMILO_RFKILL + tristate "Fujitsu-Siemens Amilo rfkill support" + depends on RFKILL + ---help--- + This is a driver for enabling wifi on some Fujitsu-Siemens Amilo + laptops. + config TC1100_WMI tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" depends on !X86_64 @@ -672,33 +696,11 @@ config INTEL_MID_POWER_BUTTON config INTEL_MFLD_THERMAL tristate "Thermal driver for Intel Medfield platform" - depends on INTEL_SCU_IPC && THERMAL + depends on MFD_INTEL_MSIC && THERMAL help Say Y here to enable thermal driver support for the Intel Medfield platform. -config RAR_REGISTER - bool "Restricted Access Region Register Driver" - depends on PCI && X86_MRST - default n - ---help--- - This driver allows other kernel drivers access to the - contents of the restricted access region control registers. - - The restricted access region control registers - (rar_registers) are used to pass address and - locking information on restricted access regions - to other drivers that use restricted access regions. - - The restricted access regions are regions of memory - on the Intel MID Platform that are not accessible to - the x86 processor, but are accessible to dedicated - processors on board peripheral devices. - - The purpose of the restricted access regions is to - protect sensitive data from compromise by unauthorized - programs running on the x86 processor. - config INTEL_IPS tristate "Intel Intelligent Power Sharing" depends on ACPI diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 293a320d9fa..bb947657d49 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -17,12 +17,14 @@ obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ACERHDF) += acerhdf.o obj-$(CONFIG_HP_ACCEL) += hp_accel.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_AMILO_RFKILL) += amilo-rfkill.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o obj-$(CONFIG_IDEAPAD_LAPTOP) += ideapad-laptop.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_FUJITSU_LAPTOP) += fujitsu-laptop.o +obj-$(CONFIG_FUJITSU_TABLET) += fujitsu-tablet.o obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ACPI_WMI) += wmi.o @@ -34,7 +36,6 @@ obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o -obj-$(CONFIG_RAR_REGISTER) += intel_rar_register.o obj-$(CONFIG_INTEL_IPS) += intel_ips.o obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index b848277171a..1e5290b5396 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -679,6 +679,32 @@ static acpi_status AMW0_find_mailled(void) return AE_OK; } +static int AMW0_set_cap_acpi_check_device_found; + +static acpi_status AMW0_set_cap_acpi_check_device_cb(acpi_handle handle, + u32 level, void *context, void **retval) +{ + AMW0_set_cap_acpi_check_device_found = 1; + return AE_OK; +} + +static const struct acpi_device_id norfkill_ids[] = { + { "VPC2004", 0}, + { "IBM0068", 0}, + { "LEN0068", 0}, + { "", 0}, +}; + +static int AMW0_set_cap_acpi_check_device(void) +{ + const struct acpi_device_id *id; + + for (id = norfkill_ids; id->id[0]; id++) + acpi_get_devices(id->id, AMW0_set_cap_acpi_check_device_cb, + NULL, NULL); + return AMW0_set_cap_acpi_check_device_found; +} + static acpi_status AMW0_set_capabilities(void) { struct wmab_args args; @@ -692,7 +718,9 @@ static acpi_status AMW0_set_capabilities(void) * work. */ if (wmi_has_guid(AMW0_GUID2)) { - interface->capability |= ACER_CAP_WIRELESS; + if ((quirks != &quirk_unknown) || + !AMW0_set_cap_acpi_check_device()) + interface->capability |= ACER_CAP_WIRELESS; return AE_OK; } diff --git a/drivers/platform/x86/amilo-rfkill.c b/drivers/platform/x86/amilo-rfkill.c new file mode 100644 index 00000000000..19170bb7700 --- /dev/null +++ b/drivers/platform/x86/amilo-rfkill.c @@ -0,0 +1,173 @@ +/* + * Support for rfkill on some Fujitsu-Siemens Amilo laptops. + * Copyright 2011 Ben Hutchings. + * + * Based in part on the fsam7440 driver, which is: + * Copyright 2005 Alejandro Vidal Mata & Javier Vidal Mata. + * and on the fsaa1655g driver, which is: + * Copyright 2006 Martin Večeřa. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/dmi.h> +#include <linux/i8042.h> +#include <linux/io.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/rfkill.h> + +/* + * These values were obtained from disassembling and debugging the + * PM.exe program installed in the Fujitsu-Siemens AMILO A1655G + */ +#define A1655_WIFI_COMMAND 0x10C5 +#define A1655_WIFI_ON 0x25 +#define A1655_WIFI_OFF 0x45 + +static int amilo_a1655_rfkill_set_block(void *data, bool blocked) +{ + u8 param = blocked ? A1655_WIFI_OFF : A1655_WIFI_ON; + int rc; + + i8042_lock_chip(); + rc = i8042_command(¶m, A1655_WIFI_COMMAND); + i8042_unlock_chip(); + return rc; +} + +static const struct rfkill_ops amilo_a1655_rfkill_ops = { + .set_block = amilo_a1655_rfkill_set_block +}; + +/* + * These values were obtained from disassembling the PM.exe program + * installed in the Fujitsu-Siemens AMILO M 7440 + */ +#define M7440_PORT1 0x118f +#define M7440_PORT2 0x118e +#define M7440_RADIO_ON1 0x12 +#define M7440_RADIO_ON2 0x80 +#define M7440_RADIO_OFF1 0x10 +#define M7440_RADIO_OFF2 0x00 + +static int amilo_m7440_rfkill_set_block(void *data, bool blocked) +{ + u8 val1 = blocked ? M7440_RADIO_OFF1 : M7440_RADIO_ON1; + u8 val2 = blocked ? M7440_RADIO_OFF2 : M7440_RADIO_ON2; + + outb(val1, M7440_PORT1); + outb(val2, M7440_PORT2); + + /* Check whether the state has changed correctly */ + if (inb(M7440_PORT1) != val1 || inb(M7440_PORT2) != val2) + return -EIO; + + return 0; +} + +static const struct rfkill_ops amilo_m7440_rfkill_ops = { + .set_block = amilo_m7440_rfkill_set_block +}; + +static const struct dmi_system_id __devinitdata amilo_rfkill_id_table[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_BOARD_NAME, "AMILO A1655"), + }, + .driver_data = (void *)&amilo_a1655_rfkill_ops + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_BOARD_NAME, "AMILO M7440"), + }, + .driver_data = (void *)&amilo_m7440_rfkill_ops + }, + {} +}; + +static struct platform_device *amilo_rfkill_pdev; +static struct rfkill *amilo_rfkill_dev; + +static int __devinit amilo_rfkill_probe(struct platform_device *device) +{ + const struct dmi_system_id *system_id = + dmi_first_match(amilo_rfkill_id_table); + int rc; + + amilo_rfkill_dev = rfkill_alloc(KBUILD_MODNAME, &device->dev, + RFKILL_TYPE_WLAN, + system_id->driver_data, NULL); + if (!amilo_rfkill_dev) + return -ENOMEM; + + rc = rfkill_register(amilo_rfkill_dev); + if (rc) + goto fail; + + return 0; + +fail: + rfkill_destroy(amilo_rfkill_dev); + return rc; +} + +static int amilo_rfkill_remove(struct platform_device *device) +{ + rfkill_unregister(amilo_rfkill_dev); + rfkill_destroy(amilo_rfkill_dev); + return 0; +} + +static struct platform_driver amilo_rfkill_driver = { + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + }, + .probe = amilo_rfkill_probe, + .remove = amilo_rfkill_remove, +}; + +static int __init amilo_rfkill_init(void) +{ + int rc; + + if (dmi_first_match(amilo_rfkill_id_table) == NULL) + return -ENODEV; + + rc = platform_driver_register(&amilo_rfkill_driver); + if (rc) + return rc; + + amilo_rfkill_pdev = platform_device_register_simple(KBUILD_MODNAME, -1, + NULL, 0); + if (IS_ERR(amilo_rfkill_pdev)) { + rc = PTR_ERR(amilo_rfkill_pdev); + goto fail; + } + + return 0; + +fail: + platform_driver_unregister(&amilo_rfkill_driver); + return rc; +} + +static void __exit amilo_rfkill_exit(void) +{ + platform_device_unregister(amilo_rfkill_pdev); + platform_driver_unregister(&amilo_rfkill_driver); +} + +MODULE_AUTHOR("Ben Hutchings <ben@decadent.org.uk>"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(dmi, amilo_rfkill_id_table); + +module_init(amilo_rfkill_init); +module_exit(amilo_rfkill_exit); diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c new file mode 100644 index 00000000000..580d80a73c3 --- /dev/null +++ b/drivers/platform/x86/fujitsu-tablet.c @@ -0,0 +1,478 @@ +/* + * Copyright (C) 2006-2012 Robert Gerlach <khnz@gmx.de> + * Copyright (C) 2005-2006 Jan Rychter <jan@rychter.com> + * + * You can redistribute and/or modify this program under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General + * Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/acpi.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/dmi.h> + +#define MODULENAME "fujitsu-tablet" + +#define ACPI_FUJITSU_CLASS "fujitsu" + +#define INVERT_TABLET_MODE_BIT 0x01 +#define FORCE_TABLET_MODE_IF_UNDOCK 0x02 + +#define KEYMAP_LEN 16 + +static const struct acpi_device_id fujitsu_ids[] = { + { .id = "FUJ02BD" }, + { .id = "FUJ02BF" }, + { .id = "" } +}; + +struct fujitsu_config { + unsigned short keymap[KEYMAP_LEN]; + unsigned int quirks; +}; + +static unsigned short keymap_Lifebook_Tseries[KEYMAP_LEN] __initconst = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_SCROLLDOWN, + KEY_SCROLLUP, + KEY_DIRECTION, + KEY_LEFTCTRL, + KEY_BRIGHTNESSUP, + KEY_BRIGHTNESSDOWN, + KEY_BRIGHTNESS_ZERO, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_LEFTALT +}; + +static unsigned short keymap_Lifebook_U810[KEYMAP_LEN] __initconst = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_PROG1, + KEY_PROG2, + KEY_DIRECTION, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_UP, + KEY_DOWN, + KEY_RESERVED, + KEY_RESERVED, + KEY_LEFTCTRL, + KEY_LEFTALT +}; + +static unsigned short keymap_Stylistic_Tseries[KEYMAP_LEN] __initconst = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_PRINT, + KEY_BACKSPACE, + KEY_SPACE, + KEY_ENTER, + KEY_BRIGHTNESSUP, + KEY_BRIGHTNESSDOWN, + KEY_DOWN, + KEY_UP, + KEY_SCROLLUP, + KEY_SCROLLDOWN, + KEY_LEFTCTRL, + KEY_LEFTALT +}; + +static unsigned short keymap_Stylistic_ST5xxx[KEYMAP_LEN] __initconst = { + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_MAIL, + KEY_DIRECTION, + KEY_ESC, + KEY_ENTER, + KEY_BRIGHTNESSUP, + KEY_BRIGHTNESSDOWN, + KEY_DOWN, + KEY_UP, + KEY_SCROLLUP, + KEY_SCROLLDOWN, + KEY_LEFTCTRL, + KEY_LEFTALT +}; + +static struct { + struct input_dev *idev; + struct fujitsu_config config; + unsigned long prev_keymask; + + char phys[21]; + + int irq; + int io_base; + int io_length; +} fujitsu; + +static u8 fujitsu_ack(void) +{ + return inb(fujitsu.io_base + 2); +} + +static u8 fujitsu_status(void) +{ + return inb(fujitsu.io_base + 6); +} + +static u8 fujitsu_read_register(const u8 addr) +{ + outb(addr, fujitsu.io_base); + return inb(fujitsu.io_base + 4); +} + +static void fujitsu_send_state(void) +{ + int state; + int dock, tablet_mode; + + state = fujitsu_read_register(0xdd); + + dock = state & 0x02; + + if ((fujitsu.config.quirks & FORCE_TABLET_MODE_IF_UNDOCK) && (!dock)) { + tablet_mode = 1; + } else{ + tablet_mode = state & 0x01; + if (fujitsu.config.quirks & INVERT_TABLET_MODE_BIT) + tablet_mode = !tablet_mode; + } + + input_report_switch(fujitsu.idev, SW_DOCK, dock); + input_report_switch(fujitsu.idev, SW_TABLET_MODE, tablet_mode); + input_sync(fujitsu.idev); +} + +static void fujitsu_reset(void) +{ + int timeout = 50; + + fujitsu_ack(); + + while ((fujitsu_status() & 0x02) && (--timeout)) + msleep(20); + + fujitsu_send_state(); +} + +static int __devinit input_fujitsu_setup(struct device *parent, + const char *name, const char *phys) +{ + struct input_dev *idev; + int error; + int i; + + idev = input_allocate_device(); + if (!idev) + return -ENOMEM; + + idev->dev.parent = parent; + idev->phys = phys; + idev->name = name; + idev->id.bustype = BUS_HOST; + idev->id.vendor = 0x1734; /* Fujitsu Siemens Computer GmbH */ + idev->id.product = 0x0001; + idev->id.version = 0x0101; + + idev->keycode = fujitsu.config.keymap; + idev->keycodesize = sizeof(fujitsu.config.keymap[0]); + idev->keycodemax = ARRAY_SIZE(fujitsu.config.keymap); + + __set_bit(EV_REP, idev->evbit); + + for (i = 0; i < ARRAY_SIZE(fujitsu.config.keymap); i++) + if (fujitsu.config.keymap[i]) + input_set_capability(idev, EV_KEY, fujitsu.config.keymap[i]); + + input_set_capability(idev, EV_MSC, MSC_SCAN); + + input_set_capability(idev, EV_SW, SW_DOCK); + input_set_capability(idev, EV_SW, SW_TABLET_MODE); + + input_set_capability(idev, EV_SW, SW_DOCK); + input_set_capability(idev, EV_SW, SW_TABLET_MODE); + + error = input_register_device(idev); + if (error) { + input_free_device(idev); + return error; + } + + fujitsu.idev = idev; + return 0; +} + +static void input_fujitsu_remove(void) +{ + input_unregister_device(fujitsu.idev); +} + +static irqreturn_t fujitsu_interrupt(int irq, void *dev_id) +{ + unsigned long keymask, changed; + unsigned int keycode; + int pressed; + int i; + + if (unlikely(!(fujitsu_status() & 0x01))) + return IRQ_NONE; + + fujitsu_send_state(); + + keymask = fujitsu_read_register(0xde); + keymask |= fujitsu_read_register(0xdf) << 8; + keymask ^= 0xffff; + + changed = keymask ^ fujitsu.prev_keymask; + if (changed) { + fujitsu.prev_keymask = keymask; + + for_each_set_bit(i, &changed, KEYMAP_LEN) { + keycode = fujitsu.config.keymap[i]; + pressed = keymask & changed & BIT(i); + + if (pressed) + input_event(fujitsu.idev, EV_MSC, MSC_SCAN, i); + + input_report_key(fujitsu.idev, keycode, pressed); + input_sync(fujitsu.idev); + } + } + + fujitsu_ack(); + return IRQ_HANDLED; +} + +static int __devinit fujitsu_dmi_default(const struct dmi_system_id *dmi) +{ + printk(KERN_INFO MODULENAME ": %s\n", dmi->ident); + memcpy(fujitsu.config.keymap, dmi->driver_data, + sizeof(fujitsu.config.keymap)); + return 1; +} + +static int __devinit fujitsu_dmi_stylistic(const struct dmi_system_id *dmi) +{ + fujitsu_dmi_default(dmi); + fujitsu.config.quirks |= FORCE_TABLET_MODE_IF_UNDOCK; + fujitsu.config.quirks |= INVERT_TABLET_MODE_BIT; + return 1; +} + +static struct dmi_system_id dmi_ids[] __initconst = { + { + .callback = fujitsu_dmi_default, + .ident = "Fujitsu Siemens P/T Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK") + }, + .driver_data = keymap_Lifebook_Tseries + }, + { + .callback = fujitsu_dmi_default, + .ident = "Fujitsu Lifebook T Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook T") + }, + .driver_data = keymap_Lifebook_Tseries + }, + { + .callback = fujitsu_dmi_stylistic, + .ident = "Fujitsu Siemens Stylistic T Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "Stylistic T") + }, + .driver_data = keymap_Stylistic_Tseries + }, + { + .callback = fujitsu_dmi_default, + .ident = "Fujitsu LifeBook U810", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook U810") + }, + .driver_data = keymap_Lifebook_U810 + }, + { + .callback = fujitsu_dmi_stylistic, + .ident = "Fujitsu Siemens Stylistic ST5xxx Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "STYLISTIC ST5") + }, + .driver_data = keymap_Stylistic_ST5xxx + }, + { + .callback = fujitsu_dmi_stylistic, + .ident = "Fujitsu Siemens Stylistic ST5xxx Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "Stylistic ST5") + }, + .driver_data = keymap_Stylistic_ST5xxx + }, + { + .callback = fujitsu_dmi_default, + .ident = "Unknown (using defaults)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, ""), + DMI_MATCH(DMI_PRODUCT_NAME, "") + }, + .driver_data = keymap_Lifebook_Tseries + }, + { NULL } +}; + +static acpi_status __devinit +fujitsu_walk_resources(struct acpi_resource *res, void *data) +{ + switch (res->type) { + case ACPI_RESOURCE_TYPE_IRQ: + fujitsu.irq = res->data.irq.interrupts[0]; + return AE_OK; + + case ACPI_RESOURCE_TYPE_IO: + fujitsu.io_base = res->data.io.minimum; + fujitsu.io_length = res->data.io.address_length; + return AE_OK; + + case ACPI_RESOURCE_TYPE_END_TAG: + if (fujitsu.irq && fujitsu.io_base) + return AE_OK; + else + return AE_NOT_FOUND; + + default: + return AE_ERROR; + } +} + +static int __devinit acpi_fujitsu_add(struct acpi_device *adev) +{ + acpi_status status; + int error; + + if (!adev) + return -EINVAL; + + status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS, + fujitsu_walk_resources, NULL); + if (ACPI_FAILURE(status) || !fujitsu.irq || !fujitsu.io_base) + return -ENODEV; + + sprintf(acpi_device_name(adev), "Fujitsu %s", acpi_device_hid(adev)); + sprintf(acpi_device_class(adev), "%s", ACPI_FUJITSU_CLASS); + + snprintf(fujitsu.phys, sizeof(fujitsu.phys), + "%s/input0", acpi_device_hid(adev)); + + error = input_fujitsu_setup(&adev->dev, + acpi_device_name(adev), fujitsu.phys); + if (error) + return error; + + if (!request_region(fujitsu.io_base, fujitsu.io_length, MODULENAME)) { + input_fujitsu_remove(); + return -EBUSY; + } + + fujitsu_reset(); + + error = request_irq(fujitsu.irq, fujitsu_interrupt, + IRQF_SHARED, MODULENAME, fujitsu_interrupt); + if (error) { + release_region(fujitsu.io_base, fujitsu.io_length); + input_fujitsu_remove(); + return error; + } + + return 0; +} + +static int __devexit acpi_fujitsu_remove(struct acpi_device *adev, int type) +{ + free_irq(fujitsu.irq, fujitsu_interrupt); + release_region(fujitsu.io_base, fujitsu.io_length); + input_fujitsu_remove(); + return 0; +} + +static int acpi_fujitsu_resume(struct acpi_device *adev) +{ + fujitsu_reset(); + return 0; +} + +static struct acpi_driver acpi_fujitsu_driver = { + .name = MODULENAME, + .class = "hotkey", + .ids = fujitsu_ids, + .ops = { + .add = acpi_fujitsu_add, + .remove = acpi_fujitsu_remove, + .resume = acpi_fujitsu_resume, + } +}; + +static int __init fujitsu_module_init(void) +{ + int error; + + dmi_check_system(dmi_ids); + + error = acpi_bus_register_driver(&acpi_fujitsu_driver); + if (error) + return error; + + return 0; +} + +static void __exit fujitsu_module_exit(void) +{ + acpi_bus_unregister_driver(&acpi_fujitsu_driver); +} + +module_init(fujitsu_module_init); +module_exit(fujitsu_module_exit); + +MODULE_AUTHOR("Robert Gerlach <khnz@gmx.de>"); +MODULE_DESCRIPTION("Fujitsu tablet pc extras driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("2.4"); + +MODULE_DEVICE_TABLE(acpi, fujitsu_ids); diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index 5a34973dc16..ba68d4e7a77 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -379,7 +379,7 @@ static ssize_t hdaps_temp1_show(struct device *dev, int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); - if (ret < 0) + if (ret) return ret; return sprintf(buf, "%u\n", temp); @@ -392,7 +392,7 @@ static ssize_t hdaps_temp2_show(struct device *dev, int ret; ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); - if (ret < 0) + if (ret) return ret; return sprintf(buf, "%u\n", temp); diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 42a7d603c87..7481146a5b4 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -33,6 +33,8 @@ #include <linux/mutex.h> #include <asm/bios_ebda.h> +#include <asm-generic/io-64-nonatomic-lo-hi.h> + static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); @@ -83,19 +85,6 @@ static void __iomem *rtl_cmd_addr; static u8 rtl_cmd_type; static u8 rtl_cmd_width; -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len) { if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 809a3ae943c..88a98cff5a4 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -77,6 +77,8 @@ #include <asm/processor.h> #include "intel_ips.h" +#include <asm-generic/io-64-nonatomic-lo-hi.h> + #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32 /* @@ -344,19 +346,6 @@ struct ips_driver { static bool ips_gpu_turbo_enabled(struct ips_driver *ips); -#ifndef readq -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} -#endif - /** * ips_cpu_busy - is CPU busy? * @ips: IPS driver struct diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index f1ae5078b7e..0903a883e9f 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -23,21 +23,27 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/input.h> - -#include <asm/intel_scu_ipc.h> +#include <linux/mfd/intel_msic.h> #define DRIVER_NAME "msic_power_btn" -#define MSIC_PB_STATUS 0x3f #define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */ +/* + * MSIC document ti_datasheet defines the 1st bit reg 0x21 is used to mask + * power button interrupt + */ +#define MSIC_PWRBTNM (1 << 0) + static irqreturn_t mfld_pb_isr(int irq, void *dev_id) { struct input_dev *input = dev_id; int ret; u8 pbstat; - ret = intel_scu_ipc_ioread8(MSIC_PB_STATUS, &pbstat); + ret = intel_msic_reg_read(INTEL_MSIC_PBSTATUS, &pbstat); + dev_dbg(input->dev.parent, "PB_INT status= %d\n", pbstat); + if (ret < 0) { dev_err(input->dev.parent, "Read error %d while reading" " MSIC_PB_STATUS\n", ret); @@ -88,6 +94,24 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, input); + + /* + * SCU firmware might send power button interrupts to IA core before + * kernel boots and doesn't get EOI from IA core. The first bit of + * MSIC reg 0x21 is kept masked, and SCU firmware doesn't send new + * power interrupt to Android kernel. Unmask the bit when probing + * power button in kernel. + * There is a very narrow race between irq handler and power button + * initialization. The race happens rarely. So we needn't worry + * about it. + */ + error = intel_msic_reg_update(INTEL_MSIC_IRQLVL1MSK, 0, MSIC_PWRBTNM); + if (error) { + dev_err(&pdev->dev, "Unable to clear power button interrupt, " + "error: %d\n", error); + goto err_free_irq; + } + return 0; err_free_irq: diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index ccd7b1f8351..2ee9766737e 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -33,18 +33,15 @@ #include <linux/slab.h> #include <linux/pm.h> #include <linux/thermal.h> - -#include <asm/intel_scu_ipc.h> +#include <linux/mfd/intel_msic.h> /* Number of thermal sensors */ #define MSIC_THERMAL_SENSORS 4 /* ADC1 - thermal registers */ -#define MSIC_THERM_ADC1CNTL1 0x1C0 #define MSIC_ADC_ENBL 0x10 #define MSIC_ADC_START 0x08 -#define MSIC_THERM_ADC1CNTL3 0x1C2 #define MSIC_ADCTHERM_ENBL 0x04 #define MSIC_ADCRRDATA_ENBL 0x05 #define MSIC_CHANL_MASK_VAL 0x0F @@ -75,8 +72,8 @@ #define ADC_VAL60C 315 /* ADC base addresses */ -#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ -#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ +#define ADC_CHNL_START_ADDR INTEL_MSIC_ADC1ADDR0 /* increments by 1 */ +#define ADC_DATA_START_ADDR INTEL_MSIC_ADC1SNS0H /* increments by 2 */ /* MSIC die attributes */ #define MSIC_DIE_ADC_MIN 488 @@ -189,17 +186,17 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) addr = td_info->chnl_addr; /* Enable the msic for conversion before reading */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); + ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); if (ret) return ret; /* Re-toggle the RRDATARD bit (temporary workaround) */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); + ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCTHERM_ENBL); if (ret) return ret; /* Read the higher bits of data */ - ret = intel_scu_ipc_ioread8(addr, &data); + ret = intel_msic_reg_read(addr, &data); if (ret) return ret; @@ -207,7 +204,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) adc_val = (data << 2); addr++; - ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ + ret = intel_msic_reg_read(addr, &data);/* Read lower bits */ if (ret) return ret; @@ -235,7 +232,7 @@ static int configure_adc(int val) int ret; uint8_t data; - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data); if (ret) return ret; @@ -246,7 +243,7 @@ static int configure_adc(int val) /* Just stop the ADC */ data &= (~MSIC_ADC_START); } - return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); + return intel_msic_reg_write(INTEL_MSIC_ADC1CNTL1, data); } /** @@ -262,21 +259,21 @@ static int set_up_therm_channel(u16 base_addr) int ret; /* Enable all the sensor channels */ - ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); + ret = intel_msic_reg_write(base_addr, SKIN_SENSOR0_CODE); if (ret) return ret; - ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); + ret = intel_msic_reg_write(base_addr + 1, SKIN_SENSOR1_CODE); if (ret) return ret; - ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); + ret = intel_msic_reg_write(base_addr + 2, SYS_SENSOR_CODE); if (ret) return ret; /* Since this is the last channel, set the stop bit * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ - ret = intel_scu_ipc_iowrite8(base_addr + 3, + ret = intel_msic_reg_write(base_addr + 3, (MSIC_DIE_SENSOR_CODE | 0x10)); if (ret) return ret; @@ -295,11 +292,11 @@ static int reset_stopbit(uint16_t addr) { int ret; uint8_t data; - ret = intel_scu_ipc_ioread8(addr, &data); + ret = intel_msic_reg_read(addr, &data); if (ret) return ret; /* Set the stop bit to zero */ - return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); + return intel_msic_reg_write(addr, (data & 0xEF)); } /** @@ -322,7 +319,7 @@ static int find_free_channel(void) uint8_t data; /* check whether ADC is enabled */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data); if (ret) return ret; @@ -331,7 +328,7 @@ static int find_free_channel(void) /* ADC is already enabled; Looking for an empty channel */ for (i = 0; i < ADC_CHANLS_MAX; i++) { - ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); + ret = intel_msic_reg_read(ADC_CHNL_START_ADDR + i, &data); if (ret) return ret; @@ -359,12 +356,14 @@ static int mid_initialize_adc(struct device *dev) * Ensure that adctherm is disabled before we * initialize the ADC */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); + ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL3, &data); if (ret) return ret; - if (data & MSIC_ADCTHERM_MASK) - dev_warn(dev, "ADCTHERM already set"); + data &= ~MSIC_ADCTHERM_MASK; + ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, data); + if (ret) + return ret; /* Index of the first channel in which the stop bit is set */ channel_index = find_free_channel(); @@ -546,7 +545,7 @@ static int mid_thermal_remove(struct platform_device *pdev) return configure_adc(0); } -#define DRIVER_NAME "msic_sensor" +#define DRIVER_NAME "msic_thermal" static const struct platform_device_id therm_id_table[] = { { DRIVER_NAME, 1 }, diff --git a/drivers/platform/x86/intel_rar_register.c b/drivers/platform/x86/intel_rar_register.c deleted file mode 100644 index c8a6aed4527..00000000000 --- a/drivers/platform/x86/intel_rar_register.c +++ /dev/null @@ -1,669 +0,0 @@ -/* - * rar_register.c - An Intel Restricted Access Region register driver - * - * Copyright(c) 2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - * 02111-1307, USA. - * - * ------------------------------------------------------------------- - * 20091204 Mark Allyn <mark.a.allyn@intel.com> - * Ossama Othman <ossama.othman@intel.com> - * Cleanup per feedback from Alan Cox and Arjan Van De Ven - * - * 20090806 Ossama Othman <ossama.othman@intel.com> - * Return zero high address if upper 22 bits is zero. - * Cleaned up checkpatch errors. - * Clarified that driver is dealing with bus addresses. - * - * 20090702 Ossama Othman <ossama.othman@intel.com> - * Removed unnecessary include directives - * Cleaned up spinlocks. - * Cleaned up logging. - * Improved invalid parameter checks. - * Fixed and simplified RAR address retrieval and RAR locking - * code. - * - * 20090626 Mark Allyn <mark.a.allyn@intel.com> - * Initial publish - */ - -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/device.h> -#include <linux/kernel.h> -#include <linux/rar_register.h> - -/* === Lincroft Message Bus Interface === */ -#define LNC_MCR_OFFSET 0xD0 /* Message Control Register */ -#define LNC_MDR_OFFSET 0xD4 /* Message Data Register */ - -/* Message Opcodes */ -#define LNC_MESSAGE_READ_OPCODE 0xD0 -#define LNC_MESSAGE_WRITE_OPCODE 0xE0 - -/* Message Write Byte Enables */ -#define LNC_MESSAGE_BYTE_WRITE_ENABLES 0xF - -/* B-unit Port */ -#define LNC_BUNIT_PORT 0x3 - -/* === Lincroft B-Unit Registers - Programmed by IA32 firmware === */ -#define LNC_BRAR0L 0x10 -#define LNC_BRAR0H 0x11 -#define LNC_BRAR1L 0x12 -#define LNC_BRAR1H 0x13 -/* Reserved for SeP */ -#define LNC_BRAR2L 0x14 -#define LNC_BRAR2H 0x15 - -/* Moorestown supports three restricted access regions. */ -#define MRST_NUM_RAR 3 - -/* RAR Bus Address Range */ -struct rar_addr { - dma_addr_t low; - dma_addr_t high; -}; - -/* - * We create one of these for each RAR - */ -struct client { - int (*callback)(unsigned long data); - unsigned long driver_priv; - bool busy; -}; - -static DEFINE_MUTEX(rar_mutex); -static DEFINE_MUTEX(lnc_reg_mutex); - -/* - * One per RAR device (currently only one device) - */ -struct rar_device { - struct rar_addr rar_addr[MRST_NUM_RAR]; - struct pci_dev *rar_dev; - bool registered; - bool allocated; - struct client client[MRST_NUM_RAR]; -}; - -/* Current platforms have only one rar_device for 3 rar regions */ -static struct rar_device my_rar_device; - -/* - * Abstract out multiple device support. Current platforms only - * have a single RAR device. - */ - -/** - * alloc_rar_device - return a new RAR structure - * - * Return a new (but not yet ready) RAR device object - */ -static struct rar_device *alloc_rar_device(void) -{ - if (my_rar_device.allocated) - return NULL; - my_rar_device.allocated = 1; - return &my_rar_device; -} - -/** - * free_rar_device - free a RAR object - * @rar: the RAR device being freed - * - * Release a RAR object and any attached resources - */ -static void free_rar_device(struct rar_device *rar) -{ - pci_dev_put(rar->rar_dev); - rar->allocated = 0; -} - -/** - * _rar_to_device - return the device handling this RAR - * @rar: RAR number - * @off: returned offset - * - * Internal helper for looking up RAR devices. This and alloc are the - * two functions that need touching to go to multiple RAR devices. - */ -static struct rar_device *_rar_to_device(int rar, int *off) -{ - if (rar >= 0 && rar < MRST_NUM_RAR) { - *off = rar; - return &my_rar_device; - } - return NULL; -} - -/** - * rar_to_device - return the device handling this RAR - * @rar: RAR number - * @off: returned offset - * - * Return the device this RAR maps to if one is present, otherwise - * returns NULL. Reports the offset relative to the base of this - * RAR device in off. - */ -static struct rar_device *rar_to_device(int rar, int *off) -{ - struct rar_device *rar_dev = _rar_to_device(rar, off); - if (rar_dev == NULL || !rar_dev->registered) - return NULL; - return rar_dev; -} - -/** - * rar_to_client - return the client handling this RAR - * @rar: RAR number - * - * Return the client this RAR maps to if a mapping is known, otherwise - * returns NULL. - */ -static struct client *rar_to_client(int rar) -{ - int idx; - struct rar_device *r = _rar_to_device(rar, &idx); - if (r != NULL) - return &r->client[idx]; - return NULL; -} - -/** - * rar_read_addr - retrieve a RAR mapping - * @pdev: PCI device for the RAR - * @offset: offset for message - * @addr: returned address - * - * Reads the address of a given RAR register. Returns 0 on success - * or an error code on failure. - */ -static int rar_read_addr(struct pci_dev *pdev, int offset, dma_addr_t *addr) -{ - /* - * ======== The Lincroft Message Bus Interface ======== - * Lincroft registers may be obtained via PCI from - * the host bridge using the Lincroft Message Bus - * Interface. That message bus interface is generally - * comprised of two registers: a control register (MCR, 0xDO) - * and a data register (MDR, 0xD4). - * - * The MCR (message control register) format is the following: - * 1. [31:24]: Opcode - * 2. [23:16]: Port - * 3. [15:8]: Register Offset - * 4. [7:4]: Byte Enables (use 0xF to set all of these bits - * to 1) - * 5. [3:0]: reserved - * - * Read (0xD0) and write (0xE0) opcodes are written to the - * control register when reading and writing to Lincroft - * registers, respectively. - * - * We're interested in registers found in the Lincroft - * B-unit. The B-unit port is 0x3. - * - * The six B-unit RAR register offsets we use are listed - * earlier in this file. - * - * Lastly writing to the MCR register requires the "Byte - * enables" bits to be set to 1. This may be achieved by - * writing 0xF at bit 4. - * - * The MDR (message data register) format is the following: - * 1. [31:0]: Read/Write Data - * - * Data being read from this register is only available after - * writing the appropriate control message to the MCR - * register. - * - * Data being written to this register must be written before - * writing the appropriate control message to the MCR - * register. - */ - - int result; - u32 addr32; - - /* Construct control message */ - u32 const message = - (LNC_MESSAGE_READ_OPCODE << 24) - | (LNC_BUNIT_PORT << 16) - | (offset << 8) - | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); - - dev_dbg(&pdev->dev, "Offset for 'get' LNC MSG is %x\n", offset); - - /* - * We synchronize access to the Lincroft MCR and MDR registers - * until BOTH the command is issued through the MCR register - * and the corresponding data is read from the MDR register. - * Otherwise a race condition would exist between accesses to - * both registers. - */ - - mutex_lock(&lnc_reg_mutex); - - /* Send the control message */ - result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); - if (!result) { - /* Read back the address as a 32bit value */ - result = pci_read_config_dword(pdev, LNC_MDR_OFFSET, &addr32); - *addr = (dma_addr_t)addr32; - } - mutex_unlock(&lnc_reg_mutex); - return result; -} - -/** - * rar_set_addr - Set a RAR mapping - * @pdev: PCI device for the RAR - * @offset: offset for message - * @addr: address to set - * - * Sets the address of a given RAR register. Returns 0 on success - * or an error code on failure. - */ -static int rar_set_addr(struct pci_dev *pdev, - int offset, - dma_addr_t addr) -{ - /* - * Data being written to this register must be written before - * writing the appropriate control message to the MCR - * register. - * See rar_get_addrs() for a description of the - * message bus interface being used here. - */ - - int result; - - /* Construct control message */ - u32 const message = (LNC_MESSAGE_WRITE_OPCODE << 24) - | (LNC_BUNIT_PORT << 16) - | (offset << 8) - | (LNC_MESSAGE_BYTE_WRITE_ENABLES << 4); - - /* - * We synchronize access to the Lincroft MCR and MDR registers - * until BOTH the command is issued through the MCR register - * and the corresponding data is read from the MDR register. - * Otherwise a race condition would exist between accesses to - * both registers. - */ - - mutex_lock(&lnc_reg_mutex); - - /* Send the control message */ - result = pci_write_config_dword(pdev, LNC_MDR_OFFSET, addr); - if (!result) - /* And address */ - result = pci_write_config_dword(pdev, LNC_MCR_OFFSET, message); - - mutex_unlock(&lnc_reg_mutex); - return result; -} - -/* - * rar_init_params - Initialize RAR parameters - * @rar: RAR device to initialise - * - * Initialize RAR parameters, such as bus addresses, etc. Returns 0 - * on success, or an error code on failure. - */ -static int init_rar_params(struct rar_device *rar) -{ - struct pci_dev *pdev = rar->rar_dev; - unsigned int i; - int result = 0; - int offset = 0x10; /* RAR 0 to 2 in order low/high/low/high/... */ - - /* Retrieve RAR start and end bus addresses. - * Access the RAR registers through the Lincroft Message Bus - * Interface on PCI device: 00:00.0 Host bridge. - */ - - for (i = 0; i < MRST_NUM_RAR; ++i) { - struct rar_addr *addr = &rar->rar_addr[i]; - - result = rar_read_addr(pdev, offset++, &addr->low); - if (result != 0) - return result; - - result = rar_read_addr(pdev, offset++, &addr->high); - if (result != 0) - return result; - - - /* - * Only the upper 22 bits of the RAR addresses are - * stored in their corresponding RAR registers so we - * must set the lower 10 bits accordingly. - - * The low address has its lower 10 bits cleared, and - * the high address has all its lower 10 bits set, - * e.g.: - * low = 0x2ffffc00 - */ - - addr->low &= (dma_addr_t)0xfffffc00u; - - /* - * Set bits 9:0 on uppser address if bits 31:10 are non - * zero; otherwize clear all bits - */ - - if ((addr->high & 0xfffffc00u) == 0) - addr->high = 0; - else - addr->high |= 0x3ffu; - } - /* Done accessing the device. */ - - if (result == 0) { - for (i = 0; i != MRST_NUM_RAR; ++i) { - /* - * "BRAR" refers to the RAR registers in the - * Lincroft B-unit. - */ - dev_info(&pdev->dev, "BRAR[%u] bus address range = " - "[%lx, %lx]\n", i, - (unsigned long)rar->rar_addr[i].low, - (unsigned long)rar->rar_addr[i].high); - } - } - return result; -} - -/** - * rar_get_address - get the bus address in a RAR - * @start: return value of start address of block - * @end: return value of end address of block - * - * The rar_get_address function is used by other device drivers - * to obtain RAR address information on a RAR. It takes three - * parameters: - * - * The function returns a 0 upon success or an error if there is no RAR - * facility on this system. - */ -int rar_get_address(int rar_index, dma_addr_t *start, dma_addr_t *end) -{ - int idx; - struct rar_device *rar = rar_to_device(rar_index, &idx); - - if (rar == NULL) { - WARN_ON(1); - return -ENODEV; - } - - *start = rar->rar_addr[idx].low; - *end = rar->rar_addr[idx].high; - return 0; -} -EXPORT_SYMBOL(rar_get_address); - -/** - * rar_lock - lock a RAR register - * @rar_index: RAR to lock (0-2) - * - * The rar_lock function is ued by other device drivers to lock an RAR. - * once a RAR is locked, it stays locked until the next system reboot. - * - * The function returns a 0 upon success or an error if there is no RAR - * facility on this system, or the locking fails - */ -int rar_lock(int rar_index) -{ - struct rar_device *rar; - int result; - int idx; - dma_addr_t low, high; - - rar = rar_to_device(rar_index, &idx); - - if (rar == NULL) { - WARN_ON(1); - return -EINVAL; - } - - low = rar->rar_addr[idx].low & 0xfffffc00u; - high = rar->rar_addr[idx].high & 0xfffffc00u; - - /* - * Only allow I/O from the graphics and Langwell; - * not from the x86 processor - */ - - if (rar_index == RAR_TYPE_VIDEO) { - low |= 0x00000009; - high |= 0x00000015; - } else if (rar_index == RAR_TYPE_AUDIO) { - /* Only allow I/O from Langwell; nothing from x86 */ - low |= 0x00000008; - high |= 0x00000018; - } else - /* Read-only from all agents */ - high |= 0x00000018; - - /* - * Now program the register using the Lincroft message - * bus interface. - */ - result = rar_set_addr(rar->rar_dev, - 2 * idx, low); - - if (result == 0) - result = rar_set_addr(rar->rar_dev, - 2 * idx + 1, high); - - return result; -} -EXPORT_SYMBOL(rar_lock); - -/** - * register_rar - register a RAR handler - * @num: RAR we wish to register for - * @callback: function to call when RAR support is available - * @data: data to pass to this function - * - * The register_rar function is to used by other device drivers - * to ensure that this driver is ready. As we cannot be sure of - * the compile/execute order of drivers in the kernel, it is - * best to give this driver a callback function to call when - * it is ready to give out addresses. The callback function - * would have those steps that continue the initialization of - * a driver that do require a valid RAR address. One of those - * steps would be to call rar_get_address() - * - * This function return 0 on success or an error code on failure. - */ -int register_rar(int num, int (*callback)(unsigned long data), - unsigned long data) -{ - /* For now we hardcode a single RAR device */ - struct rar_device *rar; - struct client *c; - int idx; - int retval = 0; - - mutex_lock(&rar_mutex); - - /* Do we have a client mapping for this RAR number ? */ - c = rar_to_client(num); - if (c == NULL) { - retval = -ERANGE; - goto done; - } - /* Is it claimed ? */ - if (c->busy) { - retval = -EBUSY; - goto done; - } - c->busy = 1; - - /* See if we have a handler for this RAR yet, if we do then fire it */ - rar = rar_to_device(num, &idx); - - if (rar) { - /* - * if the driver already registered, then we can simply - * call the callback right now - */ - (*callback)(data); - goto done; - } - - /* Arrange to be called back when the hardware is found */ - c->callback = callback; - c->driver_priv = data; -done: - mutex_unlock(&rar_mutex); - return retval; -} -EXPORT_SYMBOL(register_rar); - -/** - * unregister_rar - release a RAR allocation - * @num: RAR number - * - * Releases a RAR allocation, or pending allocation. If a callback is - * pending then this function will either complete before the unregister - * returns or not at all. - */ - -void unregister_rar(int num) -{ - struct client *c; - - mutex_lock(&rar_mutex); - c = rar_to_client(num); - if (c == NULL || !c->busy) - WARN_ON(1); - else - c->busy = 0; - mutex_unlock(&rar_mutex); -} -EXPORT_SYMBOL(unregister_rar); - -/** - * rar_callback - Process callbacks - * @rar: new RAR device - * - * Process the callbacks for a newly found RAR device. - */ - -static void rar_callback(struct rar_device *rar) -{ - struct client *c = &rar->client[0]; - int i; - - mutex_lock(&rar_mutex); - - rar->registered = 1; /* Ensure no more callbacks queue */ - - for (i = 0; i < MRST_NUM_RAR; i++) { - if (c->callback && c->busy) { - c->callback(c->driver_priv); - c->callback = NULL; - } - c++; - } - mutex_unlock(&rar_mutex); -} - -/** - * rar_probe - PCI probe callback - * @dev: PCI device - * @id: matching entry in the match table - * - * A RAR device has been discovered. Initialise it and if successful - * process any pending callbacks that can now be completed. - */ -static int rar_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int error; - struct rar_device *rar; - - dev_dbg(&dev->dev, "PCI probe starting\n"); - - rar = alloc_rar_device(); - if (rar == NULL) - return -EBUSY; - - /* Enable the device */ - error = pci_enable_device(dev); - if (error) { - dev_err(&dev->dev, - "Error enabling RAR register PCI device\n"); - goto end_function; - } - - /* Fill in the rar_device structure */ - rar->rar_dev = pci_dev_get(dev); - pci_set_drvdata(dev, rar); - - /* - * Initialize the RAR parameters, which have to be retrieved - * via the message bus interface. - */ - error = init_rar_params(rar); - if (error) { - pci_disable_device(dev); - dev_err(&dev->dev, "Error retrieving RAR addresses\n"); - goto end_function; - } - /* now call anyone who has registered (using callbacks) */ - rar_callback(rar); - return 0; -end_function: - free_rar_device(rar); - return error; -} - -static DEFINE_PCI_DEVICE_TABLE(rar_pci_id_tbl) = { - { PCI_VDEVICE(INTEL, 0x4110) }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, rar_pci_id_tbl); - -/* field for registering driver to PCI device */ -static struct pci_driver rar_pci_driver = { - .name = "rar_register_driver", - .id_table = rar_pci_id_tbl, - .probe = rar_probe, - /* Cannot be unplugged - no remove */ -}; - -static int __init rar_init_handler(void) -{ - return pci_register_driver(&rar_pci_driver); -} - -static void __exit rar_exit_handler(void) -{ - pci_unregister_driver(&rar_pci_driver); -} - -module_init(rar_init_handler); -module_exit(rar_exit_handler); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Intel Restricted Access Region Register Driver"); diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index f00d0d1e065..9215ed72bec 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -159,7 +159,7 @@ static inline int busy_loop(void) /* Wait till scu status is busy */ /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) { - int i, nc, bytes, d; + int nc; u32 offset = 0; int err; u8 cbuf[IPC_WWBUF_SIZE] = { }; @@ -174,55 +174,34 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) return -ENODEV; } - if (platform != MRST_CPU_CHIP_PENWELL) { - bytes = 0; - d = 0; - for (i = 0; i < count; i++) { - cbuf[bytes++] = addr[i]; - cbuf[bytes++] = addr[i] >> 8; - if (id != IPC_CMD_PCNTRL_R) - cbuf[bytes++] = data[d++]; - if (id == IPC_CMD_PCNTRL_M) - cbuf[bytes++] = data[d++]; - } - for (i = 0; i < bytes; i += 4) - ipc_data_writel(wbuf[i/4], i); - ipc_command(bytes << 16 | id << 12 | 0 << 8 | op); - } else { - for (nc = 0; nc < count; nc++, offset += 2) { - cbuf[offset] = addr[nc]; - cbuf[offset + 1] = addr[nc] >> 8; - } + for (nc = 0; nc < count; nc++, offset += 2) { + cbuf[offset] = addr[nc]; + cbuf[offset + 1] = addr[nc] >> 8; + } - if (id == IPC_CMD_PCNTRL_R) { - for (nc = 0, offset = 0; nc < count; nc++, offset += 4) - ipc_data_writel(wbuf[nc], offset); - ipc_command((count*2) << 16 | id << 12 | 0 << 8 | op); - } else if (id == IPC_CMD_PCNTRL_W) { - for (nc = 0; nc < count; nc++, offset += 1) - cbuf[offset] = data[nc]; - for (nc = 0, offset = 0; nc < count; nc++, offset += 4) - ipc_data_writel(wbuf[nc], offset); - ipc_command((count*3) << 16 | id << 12 | 0 << 8 | op); - } else if (id == IPC_CMD_PCNTRL_M) { - cbuf[offset] = data[0]; - cbuf[offset + 1] = data[1]; - ipc_data_writel(wbuf[0], 0); /* Write wbuff */ - ipc_command(4 << 16 | id << 12 | 0 << 8 | op); - } + if (id == IPC_CMD_PCNTRL_R) { + for (nc = 0, offset = 0; nc < count; nc++, offset += 4) + ipc_data_writel(wbuf[nc], offset); + ipc_command((count*2) << 16 | id << 12 | 0 << 8 | op); + } else if (id == IPC_CMD_PCNTRL_W) { + for (nc = 0; nc < count; nc++, offset += 1) + cbuf[offset] = data[nc]; + for (nc = 0, offset = 0; nc < count; nc++, offset += 4) + ipc_data_writel(wbuf[nc], offset); + ipc_command((count*3) << 16 | id << 12 | 0 << 8 | op); + } else if (id == IPC_CMD_PCNTRL_M) { + cbuf[offset] = data[0]; + cbuf[offset + 1] = data[1]; + ipc_data_writel(wbuf[0], 0); /* Write wbuff */ + ipc_command(4 << 16 | id << 12 | 0 << 8 | op); } err = busy_loop(); if (id == IPC_CMD_PCNTRL_R) { /* Read rbuf */ /* Workaround: values are read as 0 without memcpy_fromio */ memcpy_fromio(cbuf, ipcdev.ipc_base + 0x90, 16); - if (platform != MRST_CPU_CHIP_PENWELL) { - for (nc = 0, offset = 2; nc < count; nc++, offset += 3) - data[nc] = ipc_data_readb(offset); - } else { - for (nc = 0; nc < count; nc++) - data[nc] = ipc_data_readb(nc); - } + for (nc = 0; nc < count; nc++) + data[nc] = ipc_data_readb(nc); } mutex_unlock(&ipclock); return err; @@ -503,148 +482,6 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data) } EXPORT_SYMBOL(intel_scu_ipc_i2c_cntrl); -#define IPC_FW_LOAD_ADDR 0xFFFC0000 /* Storage location for FW image */ -#define IPC_FW_UPDATE_MBOX_ADDR 0xFFFFDFF4 /* Mailbox between ipc and scu */ -#define IPC_MAX_FW_SIZE 262144 /* 256K storage size for loading the FW image */ -#define IPC_FW_MIP_HEADER_SIZE 2048 /* Firmware MIP header size */ -/* IPC inform SCU to get ready for update process */ -#define IPC_CMD_FW_UPDATE_READY 0x10FE -/* IPC inform SCU to go for update process */ -#define IPC_CMD_FW_UPDATE_GO 0x20FE -/* Status code for fw update */ -#define IPC_FW_UPDATE_SUCCESS 0x444f4e45 /* Status code 'DONE' */ -#define IPC_FW_UPDATE_BADN 0x4241444E /* Status code 'BADN' */ -#define IPC_FW_TXHIGH 0x54784849 /* Status code 'IPC_FW_TXHIGH' */ -#define IPC_FW_TXLOW 0x54784c4f /* Status code 'IPC_FW_TXLOW' */ - -struct fw_update_mailbox { - u32 status; - u32 scu_flag; - u32 driver_flag; -}; - - -/** - * intel_scu_ipc_fw_update - Firmware update utility - * @buffer: firmware buffer - * @length: size of firmware buffer - * - * This function provides an interface to load the firmware into - * the SCU. Returns 0 on success or -1 on failure - */ -int intel_scu_ipc_fw_update(u8 *buffer, u32 length) -{ - void __iomem *fw_update_base; - struct fw_update_mailbox __iomem *mailbox = NULL; - int retry_cnt = 0; - u32 status; - - mutex_lock(&ipclock); - fw_update_base = ioremap_nocache(IPC_FW_LOAD_ADDR, (128*1024)); - if (fw_update_base == NULL) { - mutex_unlock(&ipclock); - return -ENOMEM; - } - mailbox = ioremap_nocache(IPC_FW_UPDATE_MBOX_ADDR, - sizeof(struct fw_update_mailbox)); - if (mailbox == NULL) { - iounmap(fw_update_base); - mutex_unlock(&ipclock); - return -ENOMEM; - } - - ipc_command(IPC_CMD_FW_UPDATE_READY); - - /* Intitialize mailbox */ - writel(0, &mailbox->status); - writel(0, &mailbox->scu_flag); - writel(0, &mailbox->driver_flag); - - /* Driver copies the 2KB MIP header to SRAM at 0xFFFC0000*/ - memcpy_toio(fw_update_base, buffer, 0x800); - - /* Driver sends "FW Update" IPC command (CMD_ID 0xFE; MSG_ID 0x02). - * Upon receiving this command, SCU will write the 2K MIP header - * from 0xFFFC0000 into NAND. - * SCU will write a status code into the Mailbox, and then set scu_flag. - */ - - ipc_command(IPC_CMD_FW_UPDATE_GO); - - /*Driver stalls until scu_flag is set */ - while (readl(&mailbox->scu_flag) != 1) { - rmb(); - mdelay(1); - } - - /* Driver checks Mailbox status. - * If the status is 'BADN', then abort (bad NAND). - * If the status is 'IPC_FW_TXLOW', then continue. - */ - while (readl(&mailbox->status) != IPC_FW_TXLOW) { - rmb(); - mdelay(10); - } - mdelay(10); - -update_retry: - if (retry_cnt > 5) - goto update_end; - - if (readl(&mailbox->status) != IPC_FW_TXLOW) - goto update_end; - buffer = buffer + 0x800; - memcpy_toio(fw_update_base, buffer, 0x20000); - writel(1, &mailbox->driver_flag); - while (readl(&mailbox->scu_flag) == 1) { - rmb(); - mdelay(1); - } - - /* check for 'BADN' */ - if (readl(&mailbox->status) == IPC_FW_UPDATE_BADN) - goto update_end; - - while (readl(&mailbox->status) != IPC_FW_TXHIGH) { - rmb(); - mdelay(10); - } - mdelay(10); - - if (readl(&mailbox->status) != IPC_FW_TXHIGH) - goto update_end; - - buffer = buffer + 0x20000; - memcpy_toio(fw_update_base, buffer, 0x20000); - writel(0, &mailbox->driver_flag); - - while (mailbox->scu_flag == 0) { - rmb(); - mdelay(1); - } - - /* check for 'BADN' */ - if (readl(&mailbox->status) == IPC_FW_UPDATE_BADN) - goto update_end; - - if (readl(&mailbox->status) == IPC_FW_TXLOW) { - ++retry_cnt; - goto update_retry; - } - -update_end: - status = readl(&mailbox->status); - - iounmap(fw_update_base); - iounmap(mailbox); - mutex_unlock(&ipclock); - - if (status == IPC_FW_UPDATE_SUCCESS) - return 0; - return -EIO; -} -EXPORT_SYMBOL(intel_scu_ipc_fw_update); - /* * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1 * When ioc bit is set to 1, caller api must wait for interrupt handler called @@ -727,7 +564,6 @@ static void ipc_remove(struct pci_dev *pdev) } static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080e)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x082a)}, { 0,} }; diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c index 2d0f9136ea9..02bc5a6343c 100644 --- a/drivers/platform/x86/intel_scu_ipcutil.c +++ b/drivers/platform/x86/intel_scu_ipcutil.c @@ -26,13 +26,10 @@ static int major; -#define MAX_FW_SIZE 264192 - /* ioctl commnds */ #define INTE_SCU_IPC_REGISTER_READ 0 #define INTE_SCU_IPC_REGISTER_WRITE 1 #define INTE_SCU_IPC_REGISTER_UPDATE 2 -#define INTE_SCU_IPC_FW_UPDATE 0xA2 struct scu_ipc_data { u32 count; /* No. of registers */ @@ -88,27 +85,14 @@ static long scu_ipc_ioctl(struct file *fp, unsigned int cmd, if (!capable(CAP_SYS_RAWIO)) return -EPERM; - if (cmd == INTE_SCU_IPC_FW_UPDATE) { - u8 *fwbuf = kmalloc(MAX_FW_SIZE, GFP_KERNEL); - if (fwbuf == NULL) - return -ENOMEM; - if (copy_from_user(fwbuf, (u8 *)arg, MAX_FW_SIZE)) { - kfree(fwbuf); - return -EFAULT; - } - ret = intel_scu_ipc_fw_update(fwbuf, MAX_FW_SIZE); - kfree(fwbuf); - return ret; - } else { - if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data))) - return -EFAULT; - ret = scu_reg_access(cmd, &data); - if (ret < 0) - return ret; - if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data))) - return -EFAULT; - return 0; - } + if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data))) + return -EFAULT; + ret = scu_reg_access(cmd, &data); + if (ret < 0) + return ret; + if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data))) + return -EFAULT; + return 0; } static const struct file_operations scu_ipc_fops = { diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 05be30ee158..ffff8b4b494 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -562,8 +562,8 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device) num_sifr = acpi_pcc_get_sqty(device); - if (num_sifr > 255) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr too large")); + if (num_sifr < 0 || num_sifr > 255) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr out of range")); return -ENODEV; } |