diff options
Diffstat (limited to 'drivers/scsi/isci/task.c')
-rw-r--r-- | drivers/scsi/isci/task.c | 1675 |
1 files changed, 1675 insertions, 0 deletions
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c new file mode 100644 index 00000000000..2df45c57fc6 --- /dev/null +++ b/drivers/scsi/isci/task.c @@ -0,0 +1,1675 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/completion.h> +#include <linux/irqflags.h> +#include "sas.h" +#include <scsi/libsas.h> +#include "remote_device.h" +#include "remote_node_context.h" +#include "isci.h" +#include "request.h" +#include "task.h" +#include "host.h" + +/** +* isci_task_refuse() - complete the request to the upper layer driver in +* the case where an I/O needs to be completed back in the submit path. +* @ihost: host on which the the request was queued +* @task: request to complete +* @response: response code for the completed task. +* @status: status code for the completed task. +* +*/ +static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, + enum service_response response, + enum exec_status status) + +{ + enum isci_completion_selection disposition; + + disposition = isci_perform_normal_io_completion; + disposition = isci_task_set_completion_status(task, response, status, + disposition); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (disposition) { + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + task->lldd_task = NULL; + + isci_execpath_callback(ihost, task, task->task_done); + break; + + case isci_perform_aborted_io_completion: + /* No notification because this request is already in the + * abort path. + */ + dev_dbg(&ihost->pdev->dev, + "%s: Aborted - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&ihost->pdev->dev, + "%s: Error - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + isci_execpath_callback(ihost, task, sas_task_abort); + break; + + default: + dev_dbg(&ihost->pdev->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; + } +} + +#define for_each_sas_task(num, task) \ + for (; num > 0; num--,\ + task = list_entry(task->list.next, struct sas_task, list)) + + +static inline int isci_device_io_ready(struct isci_remote_device *idev, + struct sas_task *task) +{ + return idev ? test_bit(IDEV_IO_READY, &idev->flags) || + (test_bit(IDEV_IO_NCQERROR, &idev->flags) && + isci_task_is_ncq_recovery(task)) + : 0; +} +/** + * isci_task_execute_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to send a task down to + * hardware. + * @task: This parameter specifies the SAS task to send. + * @num: This parameter specifies the number of tasks to queue. + * @gfp_flags: This parameter specifies the context of this call. + * + * status, zero indicates success. + */ +int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) +{ + struct isci_host *ihost = dev_to_ihost(task->dev); + struct isci_remote_device *idev; + unsigned long flags; + bool io_ready; + u16 tag; + + dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); + + for_each_sas_task(num, task) { + enum sci_status status = SCI_FAILURE; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(task->dev); + io_ready = isci_device_io_ready(idev, task); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n", + task, num, task->dev, idev, idev ? idev->flags : 0, + task->uldd_task); + + if (!idev) { + isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); + } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) { + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } else { + /* There is a device and it's ready for I/O. */ + spin_lock_irqsave(&task->task_state_lock, flags); + + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + /* The I/O was aborted. */ + spin_unlock_irqrestore(&task->task_state_lock, + flags); + + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED); + } else { + task->task_state_flags |= SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* build and send the request. */ + status = isci_request_execute(ihost, idev, task, tag); + + if (status != SCI_SUCCESS) { + + spin_lock_irqsave(&task->task_state_lock, flags); + /* Did not really start this command. */ + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Indicate QUEUE_FULL so that the scsi + * midlayer retries. if the request + * failed for remote device reasons, + * it gets returned as + * SAS_TASK_UNDELIVERED next time + * through. + */ + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } + } + } + if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) { + spin_lock_irqsave(&ihost->scic_lock, flags); + /* command never hit the device, so just free + * the tci and skip the sequence increment + */ + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + isci_put_device(idev); + } + return 0; +} + +static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) +{ + struct isci_tmf *isci_tmf; + enum sci_status status; + + if (tmf_task != ireq->ttype) + return SCI_FAILURE; + + isci_tmf = isci_request_access_tmf(ireq); + + switch (isci_tmf->tmf_code) { + + case isci_tmf_sata_srst_high: + case isci_tmf_sata_srst_low: { + struct host_to_dev_fis *fis = &ireq->stp.cmd; + + memset(fis, 0, sizeof(*fis)); + + fis->fis_type = 0x27; + fis->flags &= ~0x80; + fis->flags &= 0xF0; + if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) + fis->control |= ATA_SRST; + else + fis->control &= ~ATA_SRST; + break; + } + /* other management commnd go here... */ + default: + return SCI_FAILURE; + } + + /* core builds the protocol specific request + * based on the h2d fis. + */ + status = sci_task_request_construct_sata(ireq); + + return status; +} + +static struct isci_request *isci_task_request_build(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 tag, struct isci_tmf *isci_tmf) +{ + enum sci_status status = SCI_FAILURE; + struct isci_request *ireq = NULL; + struct domain_device *dev; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_tmf = %p\n", __func__, isci_tmf); + + dev = idev->domain_dev; + + /* do common allocation and init of request object. */ + ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag); + if (!ireq) + return NULL; + + /* let the core do it's construct. */ + status = sci_task_request_construct(ihost, idev, tag, + ireq); + + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_task_request_construct failed - " + "status = 0x%x\n", + __func__, + status); + return NULL; + } + + /* XXX convert to get this from task->tproto like other drivers */ + if (dev->dev_type == SAS_END_DEV) { + isci_tmf->proto = SAS_PROTOCOL_SSP; + status = sci_task_request_construct_ssp(ireq); + if (status != SCI_SUCCESS) + return NULL; + } + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + isci_tmf->proto = SAS_PROTOCOL_SATA; + status = isci_sata_management_task_request_build(ireq); + + if (status != SCI_SUCCESS) + return NULL; + } + return ireq; +} + +static int isci_task_execute_tmf(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_tmf *tmf, unsigned long timeout_ms) +{ + DECLARE_COMPLETION_ONSTACK(completion); + enum sci_task_status status = SCI_TASK_FAILURE; + struct isci_request *ireq; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + unsigned long timeleft; + u16 tag; + + spin_lock_irqsave(&ihost->scic_lock, flags); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + return ret; + + /* sanity check, return TMF_RESP_FUNC_FAILED + * if the device is not there and ready. + */ + if (!idev || + (!test_bit(IDEV_IO_READY, &idev->flags) && + !test_bit(IDEV_IO_NCQERROR, &idev->flags))) { + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p not ready (%#lx)\n", + __func__, + idev, idev ? idev->flags : 0); + goto err_tci; + } else + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", + __func__, idev); + + /* Assign the pointer to the TMF's completion kernel wait structure. */ + tmf->complete = &completion; + + ireq = isci_task_request_build(ihost, idev, tag, tmf); + if (!ireq) + goto err_tci; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* start the TMF io. */ + status = sci_controller_start_task(ihost, idev, ireq); + + if (status != SCI_TASK_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: start_io failed - status = 0x%x, request = %p\n", + __func__, + status, + ireq); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + goto err_tci; + } + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); + + isci_request_change_state(ireq, started); + + /* add the request to the remote device request list. */ + list_add(&ireq->dev_node, &idev->reqs_in_process); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Wait for the TMF to complete, or a timeout. */ + timeleft = wait_for_completion_timeout(&completion, + msecs_to_jiffies(timeout_ms)); + + if (timeleft == 0) { + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); + + sci_controller_terminate_request(ihost, + idev, + ireq); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + wait_for_completion(tmf->complete); + } + + isci_print_tmf(tmf); + + if (tmf->status == SCI_SUCCESS) + ret = TMF_RESP_FUNC_COMPLETE; + else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) { + dev_dbg(&ihost->pdev->dev, + "%s: tmf.status == " + "SCI_FAILURE_IO_RESPONSE_VALID\n", + __func__); + ret = TMF_RESP_FUNC_COMPLETE; + } + /* Else - leave the default "failed" status alone. */ + + dev_dbg(&ihost->pdev->dev, + "%s: completed request = %p\n", + __func__, + ireq); + + return ret; + + err_tci: + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + return ret; +} + +static void isci_task_build_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data) +{ + memset(tmf, 0, sizeof(*tmf)); + + tmf->tmf_code = code; + tmf->cb_state_func = tmf_sent_cb; + tmf->cb_data = cb_data; +} + +static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + struct isci_request *old_request) +{ + isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request); + tmf->io_tag = old_request->io_tag; +} + +/** + * isci_task_validate_request_to_abort() - This function checks the given I/O + * against the "started" state. If the request is still "started", it's + * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD + * BEFORE CALLING THIS FUNCTION. + * @isci_request: This parameter specifies the request object to control. + * @isci_host: This parameter specifies the ISCI host object + * @isci_device: This is the device to which the request is pending. + * @aborted_io_completion: This is a completion structure that will be added to + * the request in case it is changed to aborting; this completion is + * triggered when the request is fully completed. + * + * Either "started" on successful change of the task status to "aborted", or + * "unallocated" if the task cannot be controlled. + */ +static enum isci_request_status isci_task_validate_request_to_abort( + struct isci_request *isci_request, + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct completion *aborted_io_completion) +{ + enum isci_request_status old_state = unallocated; + + /* Only abort the task if it's in the + * device's request_in_process list + */ + if (isci_request && !list_empty(&isci_request->dev_node)) { + old_state = isci_request_change_started_to_aborted( + isci_request, aborted_io_completion); + + } + + return old_state; +} + +/** +* isci_request_cleanup_completed_loiterer() - This function will take care of +* the final cleanup on any request which has been explicitly terminated. +* @isci_host: This parameter specifies the ISCI host object +* @isci_device: This is the device to which the request is pending. +* @isci_request: This parameter specifies the terminated request object. +* @task: This parameter is the libsas I/O request. +*/ +static void isci_request_cleanup_completed_loiterer( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request, + struct sas_task *task) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device=%p, request=%p, task=%p\n", + __func__, isci_device, isci_request, task); + + if (task != NULL) { + + spin_lock_irqsave(&task->task_state_lock, flags); + task->lldd_task = NULL; + + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + + isci_set_task_doneflags(task); + + /* If this task is not in the abort path, call task_done. */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + spin_unlock_irqrestore(&task->task_state_lock, flags); + task->task_done(task); + } else + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + + if (isci_request != NULL) { + spin_lock_irqsave(&isci_host->scic_lock, flags); + list_del_init(&isci_request->dev_node); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + } +} + +/** + * isci_terminate_request_core() - This function will terminate the given + * request, and wait for it to complete. This function must only be called + * from a thread that can wait. Note that the request is terminated and + * completed (back to the host, if started there). + * @ihost: This SCU. + * @idev: The target. + * @isci_request: The I/O request to be terminated. + * + */ +static void isci_terminate_request_core(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *isci_request) +{ + enum sci_status status = SCI_SUCCESS; + bool was_terminated = false; + bool needs_cleanup_handling = false; + enum isci_request_status request_status; + unsigned long flags; + unsigned long termination_completed = 1; + struct completion *io_request_completion; + struct sas_task *task; + + dev_dbg(&ihost->pdev->dev, + "%s: device = %p; request = %p\n", + __func__, idev, isci_request); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + io_request_completion = isci_request->io_request_completion; + + task = (isci_request->ttype == io_task) + ? isci_request_access_task(isci_request) + : NULL; + + /* Note that we are not going to control + * the target to abort the request. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags); + + /* Make sure the request wasn't just sitting around signalling + * device condition (if the request handle is NULL, then the + * request completed but needed additional handling here). + */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + was_terminated = true; + needs_cleanup_handling = true; + status = sci_controller_terminate_request(ihost, + idev, + isci_request); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* + * The only time the request to terminate will + * fail is when the io request is completed and + * being aborted. + */ + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_controller_terminate_request" + " returned = 0x%x\n", + __func__, status); + + isci_request->io_request_completion = NULL; + + } else { + if (was_terminated) { + dev_dbg(&ihost->pdev->dev, + "%s: before completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + + /* Wait here for the request to complete. */ + #define TERMINATION_TIMEOUT_MSEC 500 + termination_completed + = wait_for_completion_timeout( + io_request_completion, + msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); + + if (!termination_completed) { + + /* The request to terminate has timed out. */ + spin_lock_irqsave(&ihost->scic_lock, + flags); + + /* Check for state changes. */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + + /* The best we can do is to have the + * request die a silent death if it + * ever really completes. + * + * Set the request state to "dead", + * and clear the task pointer so that + * an actual completion event callback + * doesn't do anything. + */ + isci_request->status = dead; + isci_request->io_request_completion + = NULL; + + if (isci_request->ttype == io_task) { + + /* Break links with the + * sas_task. + */ + isci_request->ttype_ptr.io_task_ptr + = NULL; + } + } else + termination_completed = 1; + + spin_unlock_irqrestore(&ihost->scic_lock, + flags); + + if (!termination_completed) { + + dev_dbg(&ihost->pdev->dev, + "%s: *** Timeout waiting for " + "termination(%p/%p)\n", + __func__, io_request_completion, + isci_request); + + /* The request can no longer be referenced + * safely since it may go away if the + * termination every really does complete. + */ + isci_request = NULL; + } + } + if (termination_completed) + dev_dbg(&ihost->pdev->dev, + "%s: after completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + } + + if (termination_completed) { + + isci_request->io_request_completion = NULL; + + /* Peek at the status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request->status; + + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + || (request_status == dead) + ) + ) { + + /* The completion routine won't free a request in + * the aborted/aborting/etc. states, so we do + * it here. + */ + needs_cleanup_handling = true; + } + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + } + if (needs_cleanup_handling) + isci_request_cleanup_completed_loiterer( + ihost, idev, isci_request, task); + } +} + +/** + * isci_terminate_pending_requests() - This function will change the all of the + * requests on the given device's state to "aborting", will terminate the + * requests, and wait for them to complete. This function must only be + * called from a thread that can wait. Note that the requests are all + * terminated and completed (back to the host, if started there). + * @isci_host: This parameter specifies SCU. + * @idev: This parameter specifies the target. + * + */ +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct completion request_completion; + enum isci_request_status old_state; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&ihost->scic_lock, flags); + list_splice_init(&idev->reqs_in_process, &list); + + /* assumes that isci_terminate_request_core deletes from the list */ + while (!list_empty(&list)) { + struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node); + + /* Change state to "terminating" if it is currently + * "started". + */ + old_state = isci_request_change_started_to_newstate(ireq, + &request_completion, + terminating); + switch (old_state) { + case started: + case completed: + case aborting: + break; + default: + /* termination in progress, or otherwise dispositioned. + * We know the request was on 'list' so should be safe + * to move it back to reqs_in_process + */ + list_move(&ireq->dev_node, &idev->reqs_in_process); + ireq = NULL; + break; + } + + if (!ireq) + continue; + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + init_completion(&request_completion); + + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p request=%p; task=%p old_state=%d\n", + __func__, idev, ireq, + ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL, + old_state); + + /* If the old_state is started: + * This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. + */ + isci_terminate_request_core(ihost, idev, ireq); + spin_lock_irqsave(&ihost->scic_lock, flags); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/** + * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain + * Template functions. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +static int isci_task_send_lu_reset_sas( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun) +{ + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, isci_device = %p\n", + __func__, isci_host, isci_device); + /* Send the LUN reset to the target. By the time the call returns, + * the TMF has fully exected in the target (in which case the return + * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or + * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). + */ + isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL); + + #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET passed\n", + __func__, isci_device); + else + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET failed (%x)\n", + __func__, isci_device, ret); + + return ret; +} + +static int isci_task_send_lu_reset_sata(struct isci_host *ihost, + struct isci_remote_device *idev, u8 *lun) +{ + int ret = TMF_RESP_FUNC_FAILED; + struct isci_tmf tmf; + + /* Send the soft reset to the target */ + #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ + isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); + + ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_dbg(&ihost->pdev->dev, + "%s: Assert SRST failed (%p) = %x", + __func__, idev, ret); + + /* Return the failure so that the LUN reset is escalated + * to a target reset. + */ + } + return ret; +} + +/** + * isci_task_lu_reset() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to reset the given lun. Note the assumption that while this call is + * executing, no I/O will be sent by the host to the device. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) +{ + struct isci_host *isci_host = dev_to_ihost(domain_device); + struct isci_remote_device *isci_device; + unsigned long flags; + int ret; + + spin_lock_irqsave(&isci_host->scic_lock, flags); + isci_device = isci_lookup_device(domain_device); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", + __func__, domain_device, isci_host, isci_device); + + if (isci_device) + set_bit(IDEV_EH, &isci_device->flags); + + /* If there is a device reset pending on any request in the + * device's list, fail this LUN reset request in order to + * escalate to the device reset. + */ + if (!isci_device || + isci_device_is_reset_pending(isci_host, isci_device)) { + dev_dbg(&isci_host->pdev->dev, + "%s: No dev (%p), or " + "RESET PENDING: domain_device=%p\n", + __func__, isci_device, domain_device); + ret = TMF_RESP_FUNC_FAILED; + goto out; + } + + /* Send the task management part of the reset. */ + if (sas_protocol_ata(domain_device->tproto)) { + ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun); + } else + ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); + + /* If the LUN reset worked, all the I/O can now be terminated. */ + if (ret == TMF_RESP_FUNC_COMPLETE) + /* Terminate all I/O now. */ + isci_terminate_pending_requests(isci_host, + isci_device); + + out: + isci_put_device(isci_device); + return ret; +} + + +/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */ +int isci_task_clear_nexus_port(struct asd_sas_port *port) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) +{ + return TMF_RESP_FUNC_FAILED; +} + +/* Task Management Functions. Must be called from process context. */ + +/** + * isci_abort_task_process_cb() - This is a helper function for the abort task + * TMF command. It manages the request state with respect to the successful + * transmission / completion of the abort task request. + * @cb_state: This parameter specifies when this function was called - after + * the TMF request has been started and after it has timed-out. + * @tmf: This parameter specifies the TMF in progress. + * + * + */ +static void isci_abort_task_process_cb( + enum isci_tmf_cb_state cb_state, + struct isci_tmf *tmf, + void *cb_data) +{ + struct isci_request *old_request; + + old_request = (struct isci_request *)cb_data; + + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: tmf=%p, old_request=%p\n", + __func__, tmf, old_request); + + switch (cb_state) { + + case isci_tmf_started: + /* The TMF has been started. Nothing to do here, since the + * request state was already set to "aborted" by the abort + * task function. + */ + if ((old_request->status != aborted) + && (old_request->status != completed)) + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad request status (%d): tmf=%p, old_request=%p\n", + __func__, old_request->status, tmf, old_request); + break; + + case isci_tmf_timed_out: + + /* Set the task's state to "aborting", since the abort task + * function thread set it to "aborted" (above) in anticipation + * of the task management request working correctly. Since the + * timeout has now fired, the TMF request failed. We set the + * state such that the request completion will indicate the + * device is no longer present. + */ + isci_request_change_state(old_request, aborting); + break; + + default: + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", + __func__, cb_state, tmf, old_request); + break; + } +} + +/** + * isci_task_abort_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to abort a specified task. + * @task: This parameter specifies the SAS task to abort. + * + * status, zero indicates success. + */ +int isci_task_abort_task(struct sas_task *task) +{ + struct isci_host *isci_host = dev_to_ihost(task->dev); + DECLARE_COMPLETION_ONSTACK(aborted_io_completion); + struct isci_request *old_request = NULL; + enum isci_request_status old_state; + struct isci_remote_device *isci_device = NULL; + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + bool any_dev_reset = false; + + /* Get the isci_request reference from the task. Note that + * this check does not depend on the pending request list + * in the device, because tasks driving resets may land here + * after completion in the core. + */ + spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock(&task->task_state_lock); + + old_request = task->lldd_task; + + /* If task is already done, the request isn't valid */ + if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && + (task->task_state_flags & SAS_TASK_AT_INITIATOR) && + old_request) + isci_device = isci_lookup_device(task->dev); + + spin_unlock(&task->task_state_lock); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: task = %p\n", __func__, task); + + if (!isci_device || !old_request) + goto out; + + set_bit(IDEV_EH, &isci_device->flags); + + /* This version of the driver will fail abort requests for + * SATA/STP. Failing the abort request this way will cause the + * SCSI error handler thread to escalate to LUN reset + */ + if (sas_protocol_ata(task->task_proto)) { + dev_dbg(&isci_host->pdev->dev, + " task %p is for a STP/SATA device;" + " returning TMF_RESP_FUNC_FAILED\n" + " to cause a LUN reset...\n", task); + goto out; + } + + dev_dbg(&isci_host->pdev->dev, + "%s: old_request == %p\n", __func__, old_request); + + any_dev_reset = isci_device_is_reset_pending(isci_host,isci_device); + + spin_lock_irqsave(&task->task_state_lock, flags); + + any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + + /* If the extraction of the request reference from the task + * failed, then the request has been completed (or if there is a + * pending reset then this abort request function must be failed + * in order to escalate to the target reset). + */ + if ((old_request == NULL) || any_dev_reset) { + + /* If the device reset task flag is set, fail the task + * management request. Otherwise, the original request + * has completed. + */ + if (any_dev_reset) { + + /* Turn off the task's DONE to make sure this + * task is escalated to a target reset. + */ + task->task_state_flags &= ~SAS_TASK_STATE_DONE; + + /* Make the reset happen as soon as possible. */ + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Fail the task management request in order to + * escalate to the target reset. + */ + ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: Failing task abort in order to " + "escalate to target reset because\n" + "SAS_TASK_NEED_DEV_RESET is set for " + "task %p on dev %p\n", + __func__, task, isci_device); + + + } else { + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + isci_set_task_doneflags(task); + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); + } + goto out; + } + else + spin_unlock_irqrestore(&task->task_state_lock, flags); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check the request status and change to "aborted" if currently + * "starting"; if true then set the I/O kernel completion + * struct that will be triggered when the request completes. + */ + old_state = isci_task_validate_request_to_abort( + old_request, isci_host, isci_device, + &aborted_io_completion); + if ((old_state != started) && + (old_state != completed) && + (old_state != aborting)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* The request was already being handled by someone else (because + * they got to set the state away from started). + */ + dev_dbg(&isci_host->pdev->dev, + "%s: device = %p; old_request %p already being aborted\n", + __func__, + isci_device, old_request); + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + if (task->task_proto == SAS_PROTOCOL_SMP || + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: SMP request (%d)" + " or complete_in_target (%d), thus no TMF\n", + __func__, (task->task_proto == SAS_PROTOCOL_SMP), + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); + + /* Set the state on the task. */ + isci_task_all_done(task); + + ret = TMF_RESP_FUNC_COMPLETE; + + /* Stopping and SMP devices are not sent a TMF, and are not + * reset, but the outstanding I/O request is terminated below. + */ + } else { + /* Fill in the tmf stucture */ + isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, + isci_abort_task_process_cb, + old_request); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, + ISCI_ABORT_TASK_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: isci_task_send_tmf failed\n", + __func__); + } + if (ret == TMF_RESP_FUNC_COMPLETE) { + set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); + + /* Clean up the request on our side, and wait for the aborted + * I/O to complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request); + } + + /* Make sure we do not leave a reference to aborted_io_completion */ + old_request->io_request_completion = NULL; + out: + isci_put_device(isci_device); + return ret; +} + +/** + * isci_task_abort_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to abort all task for the given lun. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_clear_aca() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +/** + * isci_task_clear_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_query_task() - This function is implemented to cause libsas to + * correctly escalate the failed abort to a LUN or target reset (this is + * because sas_scsi_find_task libsas function does not correctly interpret + * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is + * returned, libsas turns this into a LUN reset; when FUNC_FAILED is + * returned, libsas will turn this into a target reset + * @task: This parameter specifies the sas task being queried. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_query_task( + struct sas_task *task) +{ + /* See if there is a pending device reset for this device. */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + return TMF_RESP_FUNC_FAILED; + else + return TMF_RESP_FUNC_SUCC; +} + +/* + * isci_task_request_complete() - This function is called by the sci core when + * an task request completes. + * @ihost: This parameter specifies the ISCI host object + * @ireq: This parameter is the completed isci_request object. + * @completion_status: This parameter specifies the completion status from the + * sci core. + * + * none. + */ +void +isci_task_request_complete(struct isci_host *ihost, + struct isci_request *ireq, + enum sci_task_status completion_status) +{ + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + struct completion *tmf_complete; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, status=%d\n", + __func__, ireq, completion_status); + + isci_request_change_state(ireq, completed); + + tmf->status = completion_status; + set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); + + if (tmf->proto == SAS_PROTOCOL_SSP) { + memcpy(&tmf->resp.resp_iu, + &ireq->ssp.rsp, + SSP_RESP_IU_MAX_SIZE); + } else if (tmf->proto == SAS_PROTOCOL_SATA) { + memcpy(&tmf->resp.d2h_fis, + &ireq->stp.rsp, + sizeof(struct dev_to_host_fis)); + } + + /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ + tmf_complete = tmf->complete; + + sci_controller_complete_io(ihost, ireq->target_device, ireq); + /* set the 'terminated' flag handle to make sure it cannot be terminated + * or completed again. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + + isci_request_change_state(ireq, unallocated); + list_del_init(&ireq->dev_node); + + /* The task management part completes last. */ + complete(tmf_complete); +} + +static void isci_smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void isci_smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +static struct sas_task *isci_alloc_task(void) +{ + struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL); + + if (task) { + INIT_LIST_HEAD(&task->list); + spin_lock_init(&task->task_state_lock); + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_timer(&task->timer); + init_completion(&task->completion); + } + + return task; +} + +static void isci_free_task(struct isci_host *ihost, struct sas_task *task) +{ + if (task) { + BUG_ON(!list_empty(&task->list)); + kfree(task); + } +} + +static int isci_smp_execute_task(struct isci_host *ihost, + struct domain_device *dev, void *req, + int req_size, void *resp, int resp_size) +{ + int res, retry; + struct sas_task *task = NULL; + + for (retry = 0; retry < 3; retry++) { + task = isci_alloc_task(); + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = isci_smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = isci_smp_task_timedout; + task->timer.expires = jiffies + 10*HZ; + add_timer(&task->timer); + + res = isci_task_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + dev_dbg(&ihost->pdev->dev, + "%s: executing SMP task failed:%d\n", + __func__, res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ECOMM; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + dev_dbg(&ihost->pdev->dev, + "%s: smp task timed out or aborted\n", + __func__); + isci_task_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + dev_dbg(&ihost->pdev->dev, + "%s: SMP task aborted and not done\n", + __func__); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_STAT_GOOD) { + res = 0; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; + } else { + dev_dbg(&ihost->pdev->dev, + "%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __func__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); + isci_free_task(ihost, task); + task = NULL; + } + } +ex_err: + BUG_ON(retry == 3 && task != NULL); + isci_free_task(ihost, task); + return res; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost, + struct domain_device *dev, + int phy_id, int *adt) +{ + struct smp_resp *disc_resp; + u8 *disc_req; + int res; + + disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL); + if (!disc_resp) + return -ENOMEM; + + disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL); + if (disc_req) { + disc_req[0] = SMP_REQUEST; + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + } else { + kfree(disc_resp); + return -ENOMEM; + } + res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (!res) { + if (disc_resp->result != SMP_RESP_FUNC_ACC) + res = disc_resp->result; + else + *adt = disc_resp->disc.attached_dev_type; + } + kfree(disc_req); + kfree(disc_resp); + + return res; +} + +static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num) +{ + struct domain_device *dev = idev->domain_dev; + struct isci_port *iport = idev->isci_port; + struct isci_host *ihost = iport->isci_host; + int res, iteration = 0, attached_device_type; + #define STP_WAIT_MSECS 25000 + unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS); + unsigned long deadline = jiffies + tmo; + enum { + SMP_PHYWAIT_PHYDOWN, + SMP_PHYWAIT_PHYUP, + SMP_PHYWAIT_DONE + } phy_state = SMP_PHYWAIT_PHYDOWN; + + /* While there is time, wait for the phy to go away and come back */ + while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) { + int event = atomic_read(&iport->event); + + ++iteration; + + tmo = wait_event_timeout(ihost->eventq, + event != atomic_read(&iport->event) || + !test_bit(IPORT_BCN_BLOCKED, &iport->flags), + tmo); + /* link down, stop polling */ + if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags)) + break; + + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags)); + + res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num, + &attached_device_type); + tmo = deadline - jiffies; + + if (res) { + dev_dbg(&ihost->pdev->dev, + "%s: iteration %d, phase %d:" + " SMP error=%d, time_remaining=%lu\n", + __func__, iteration, phy_state, res, tmo); + break; + } + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d, " + "attdevtype = %x\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags), + attached_device_type); + + switch (phy_state) { + case SMP_PHYWAIT_PHYDOWN: + /* Has the device gone away? */ + if (!attached_device_type) + phy_state = SMP_PHYWAIT_PHYUP; + + break; + + case SMP_PHYWAIT_PHYUP: + /* Has the device come back? */ + if (attached_device_type) + phy_state = SMP_PHYWAIT_DONE; + break; + + case SMP_PHYWAIT_DONE: + break; + } + + } + dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); +} + +static int isci_reset_device(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); + struct isci_port *iport = idev->isci_port; + enum sci_status status; + unsigned long flags; + int rc; + + dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); + + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset(idev); + if (status != SCI_SUCCESS) { + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset(%p) returned %d!\n", + __func__, idev, status); + + return TMF_RESP_FUNC_FAILED; + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Make sure all pending requests are able to be fully terminated. */ + isci_device_clear_reset_pending(ihost, idev); + + /* If this is a device on an expander, disable BCN processing. */ + if (!scsi_is_sas_phy_local(phy)) + set_bit(IPORT_BCN_BLOCKED, &iport->flags); + + rc = sas_phy_reset(phy, true); + + /* Terminate in-progress I/O now. */ + isci_remote_device_nuke_requests(ihost, idev); + + /* Since all pending TCs have been cleaned, resume the RNC. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset_complete(idev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* If this is a device on an expander, bring the phy back up. */ + if (!scsi_is_sas_phy_local(phy)) { + /* A phy reset will cause the device to go away then reappear. + * Since libsas will take action on incoming BCNs (eg. remove + * a device going through an SMP phy-control driven reset), + * we need to wait until the phy comes back up before letting + * discovery proceed in libsas. + */ + isci_wait_for_smp_phy_reset(idev, phy->number); + + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_port_bcn_enable(ihost, idev->isci_port); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset_complete(%p) " + "returned %d!\n", __func__, idev, status); + } + + dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); + + return rc; +} + +int isci_task_I_T_nexus_reset(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev || !test_bit(IDEV_EH, &idev->flags)) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} + +int isci_bus_reset_handler(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = sdev_to_domain_dev(cmd->device); + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} |