diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/Kconfig | 14 | ||||
-rw-r--r-- | drivers/tty/serial/altera_jtaguart.c | 5 | ||||
-rw-r--r-- | drivers/tty/serial/altera_uart.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/jsm/jsm.h | 7 | ||||
-rw-r--r-- | drivers/tty/serial/jsm/jsm_driver.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/jsm/jsm_neo.c | 29 | ||||
-rw-r--r-- | drivers/tty/serial/jsm/jsm_tty.c | 94 | ||||
-rw-r--r-- | drivers/tty/serial/pch_uart.c | 13 | ||||
-rw-r--r-- | drivers/tty/serial/pxa.c | 20 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/uartlite.c | 4 |
12 files changed, 79 insertions, 125 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 6deb387415e..9c3f4c4b99a 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1578,7 +1578,7 @@ config SERIAL_IFX6X60 Support for the IFX6x60 modem devices on Intel MID platforms. config SERIAL_PCH_UART - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART" depends on PCI select SERIAL_CORE help @@ -1586,12 +1586,12 @@ config SERIAL_PCH_UART which is an IOH(Input/Output Hub) for x86 embedded processor. Enabling PCH_DMA, this PCH UART works as DMA mode. - This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7213 and ML7223. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is - for MP(Media Phone) use. - ML7213/ML7223 is companion chip for Intel Atom E6xx series. - ML7213/ML7223 is completely compatible for Intel EG20T PCH. + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 60e049b041a..af46c56080d 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -18,6 +18,7 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/console.h> +#include <linux/of.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial.h> @@ -472,8 +473,6 @@ static struct of_device_id altera_jtaguart_match[] = { {}, }; MODULE_DEVICE_TABLE(of, altera_jtaguart_match); -#else -#define altera_jtaguart_match NULL #endif /* CONFIG_OF */ static struct platform_driver altera_jtaguart_platform_driver = { @@ -482,7 +481,7 @@ static struct platform_driver altera_jtaguart_platform_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, - .of_match_table = altera_jtaguart_match, + .of_match_table = of_match_ptr(altera_jtaguart_match), }, }; diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 50bc5a5ac65..0abd31d2361 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -616,8 +616,6 @@ static struct of_device_id altera_uart_match[] = { {}, }; MODULE_DEVICE_TABLE(of, altera_uart_match); -#else -#define altera_uart_match NULL #endif /* CONFIG_OF */ static struct platform_driver altera_uart_platform_driver = { @@ -626,7 +624,7 @@ static struct platform_driver altera_uart_platform_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, - .of_match_table = altera_uart_match, + .of_match_table = of_match_ptr(altera_uart_match), }, }; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 7e91b3d368c..99898773706 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1286,17 +1286,20 @@ static int serial_imx_resume(struct platform_device *dev) static int serial_imx_probe_dt(struct imx_port *sport, struct platform_device *pdev) { - static int portnum = 0; struct device_node *np = pdev->dev.of_node; const struct of_device_id *of_id = of_match_device(imx_uart_dt_ids, &pdev->dev); + int ret; if (!np) return -ENODEV; - sport->port.line = portnum++; - if (sport->port.line >= UART_NR) - return -EINVAL; + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return -ENODEV; + } + sport->port.line = ret; if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) sport->have_rtscts = 1; diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h index b704c8ce0d7..5b837e749c1 100644 --- a/drivers/tty/serial/jsm/jsm.h +++ b/drivers/tty/serial/jsm/jsm.h @@ -183,10 +183,8 @@ struct jsm_board /* Our Read/Error/Write queue sizes */ #define RQUEUEMASK 0x1FFF /* 8 K - 1 */ #define EQUEUEMASK 0x1FFF /* 8 K - 1 */ -#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ #define RQUEUESIZE (RQUEUEMASK + 1) #define EQUEUESIZE RQUEUESIZE -#define WQUEUESIZE (WQUEUEMASK + 1) /************************************************************************ @@ -226,10 +224,6 @@ struct jsm_channel { u16 ch_e_head; /* Head location of the error queue */ u16 ch_e_tail; /* Tail location of the error queue */ - u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ - u16 ch_w_head; /* Head location of the write queue */ - u16 ch_w_tail; /* Tail location of the write queue */ - u64 ch_rxcount; /* total of data received so far */ u64 ch_txcount; /* total of data transmitted so far */ @@ -378,7 +372,6 @@ extern int jsm_debug; * Prototypes for non-static functions used in more than one module * *************************************************************************/ -int jsm_tty_write(struct uart_port *port); int jsm_tty_init(struct jsm_board *); int jsm_uart_port_init(struct jsm_board *); int jsm_remove_uart_port(struct jsm_board *); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 96da17868cf..2aaafa9c58a 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -211,7 +211,6 @@ static void __devexit jsm_remove_one(struct pci_dev *pdev) if (brd->channels[i]) { kfree(brd->channels[i]->ch_rqueue); kfree(brd->channels[i]->ch_equeue); - kfree(brd->channels[i]->ch_wqueue); kfree(brd->channels[i]); } } diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c index 4538c3e3646..bd6e84699e1 100644 --- a/drivers/tty/serial/jsm/jsm_neo.c +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -496,12 +496,15 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) int s; int qlen; u32 len_written = 0; + struct circ_buf *circ; if (!ch) return; + circ = &ch->uart_port.state->xmit; + /* No data to write to the UART */ - if (ch->ch_w_tail == ch->ch_w_head) + if (uart_circ_empty(circ)) return; /* If port is "stopped", don't send any data to the UART */ @@ -517,11 +520,10 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) if (ch->ch_cached_lsr & UART_LSR_THRE) { ch->ch_cached_lsr &= ~(UART_LSR_THRE); - writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); + writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx); jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, - "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); - ch->ch_w_tail++; - ch->ch_w_tail &= WQUEUEMASK; + "Tx data: %x\n", circ->buf[circ->head]); + circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1); ch->ch_txcount++; } return; @@ -536,36 +538,36 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; /* cache head and tail of queue */ - head = ch->ch_w_head & WQUEUEMASK; - tail = ch->ch_w_tail & WQUEUEMASK; - qlen = (head - tail) & WQUEUEMASK; + head = circ->head & (UART_XMIT_SIZE - 1); + tail = circ->tail & (UART_XMIT_SIZE - 1); + qlen = uart_circ_chars_pending(circ); /* Find minimum of the FIFO space, versus queue length */ n = min(n, qlen); while (n > 0) { - s = ((head >= tail) ? head : WQUEUESIZE) - tail; + s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail; s = min(s, n); if (s <= 0) break; - memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); + memcpy_toio(&ch->ch_neo_uart->txrxburst, circ->buf + tail, s); /* Add and flip queue if needed */ - tail = (tail + s) & WQUEUEMASK; + tail = (tail + s) & (UART_XMIT_SIZE - 1); n -= s; ch->ch_txcount += s; len_written += s; } /* Update the final tail */ - ch->ch_w_tail = tail & WQUEUEMASK; + circ->tail = tail & (UART_XMIT_SIZE - 1); if (len_written >= ch->ch_t_tlevel) ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - if (!jsm_tty_write(&ch->uart_port)) + if (uart_circ_empty(circ)) uart_write_wakeup(&ch->uart_port); } @@ -946,7 +948,6 @@ static void neo_param(struct jsm_channel *ch) if ((ch->ch_c_cflag & (CBAUD)) == 0) { ch->ch_r_head = ch->ch_r_tail = 0; ch->ch_e_head = ch->ch_e_tail = 0; - ch->ch_w_head = ch->ch_w_tail = 0; neo_flush_uart_write(ch); neo_flush_uart_read(ch); diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c index 7a4a914ecff..434bd881fca 100644 --- a/drivers/tty/serial/jsm/jsm_tty.c +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -118,6 +118,19 @@ static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) udelay(10); } +/* + * jsm_tty_write() + * + * Take data from the user or kernel and send it out to the FEP. + * In here exists all the Transparent Print magic as well. + */ +static void jsm_tty_write(struct uart_port *port) +{ + struct jsm_channel *channel; + channel = container_of(port, struct jsm_channel, uart_port); + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); +} + static void jsm_tty_start_tx(struct uart_port *port) { struct jsm_channel *channel = (struct jsm_channel *)port; @@ -216,14 +229,6 @@ static int jsm_tty_open(struct uart_port *port) return -ENOMEM; } } - if (!channel->ch_wqueue) { - channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); - if (!channel->ch_wqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate write queue buf"); - return -ENOMEM; - } - } channel->ch_flags &= ~(CH_OPENING); /* @@ -237,7 +242,6 @@ static int jsm_tty_open(struct uart_port *port) */ channel->ch_r_head = channel->ch_r_tail = 0; channel->ch_e_head = channel->ch_e_tail = 0; - channel->ch_w_head = channel->ch_w_tail = 0; brd->bd_ops->flush_uart_write(channel); brd->bd_ops->flush_uart_read(channel); @@ -836,75 +840,3 @@ void jsm_check_queue_flow_control(struct jsm_channel *ch) } } } - -/* - * jsm_tty_write() - * - * Take data from the user or kernel and send it out to the FEP. - * In here exists all the Transparent Print magic as well. - */ -int jsm_tty_write(struct uart_port *port) -{ - int bufcount; - int data_count = 0,data_count1 =0; - u16 head; - u16 tail; - u16 tmask; - u32 remain; - int temp_tail = port->state->xmit.tail; - struct jsm_channel *channel = (struct jsm_channel *)port; - - tmask = WQUEUEMASK; - head = (channel->ch_w_head) & tmask; - tail = (channel->ch_w_tail) & tmask; - - if ((bufcount = tail - head - 1) < 0) - bufcount += WQUEUESIZE; - - bufcount = min(bufcount, 56); - remain = WQUEUESIZE - head; - - data_count = 0; - if (bufcount >= remain) { - bufcount -= remain; - while ((port->state->xmit.head != temp_tail) && - (data_count < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count++; - } - if (data_count == remain) head = 0; - } - - data_count1 = 0; - if (bufcount > 0) { - remain = bufcount; - while ((port->state->xmit.head != temp_tail) && - (data_count1 < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count1++; - - } - } - - port->state->xmit.tail = temp_tail; - - data_count += data_count1; - if (data_count) { - head &= tmask; - channel->ch_w_head = head; - } - - if (data_count) { - channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); - } - - return data_count; -} diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index b46218d679e..f913ed054c1 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -256,6 +256,8 @@ enum pch_uart_num_t { pch_ml7213_uart2, pch_ml7223_uart0, pch_ml7223_uart1, + pch_ml7831_uart0, + pch_ml7831_uart1, }; static struct pch_uart_driver_data drv_dat[] = { @@ -268,6 +270,8 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7213_uart2] = {PCH_UART_2LINE, 2}, [pch_ml7223_uart0] = {PCH_UART_8LINE, 0}, [pch_ml7223_uart1] = {PCH_UART_2LINE, 1}, + [pch_ml7831_uart0] = {PCH_UART_8LINE, 0}, + [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; static unsigned int default_baud = 9600; @@ -626,6 +630,7 @@ static void pch_request_dma(struct uart_port *port) dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n", __func__); dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; return; } @@ -1213,8 +1218,7 @@ static void pch_uart_shutdown(struct uart_port *port) dev_err(priv->port.dev, "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - if (priv->use_dma_flag) - pch_free_dma(port); + pch_free_dma(port); free_irq(priv->port.irq, priv); } @@ -1278,6 +1282,7 @@ static void pch_uart_set_termios(struct uart_port *port, if (rtn) goto out; + pch_uart_set_mctrl(&priv->port, priv->port.mctrl); /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -1550,6 +1555,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { .driver_data = pch_ml7223_uart0}, {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D), .driver_data = pch_ml7223_uart1}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811), + .driver_data = pch_ml7831_uart0}, + {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812), + .driver_data = pch_ml7831_uart1}, {0,}, }; diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c index 531931c1b25..5c8e3bba6c8 100644 --- a/drivers/tty/serial/pxa.c +++ b/drivers/tty/serial/pxa.c @@ -100,6 +100,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status) int max_count = 256; do { + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 2 + * Disable the Reciever Time Out Interrupt via IER[RTOEI] + */ + up->ier &= ~UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); + ch = serial_in(up, UART_RX); flag = TTY_NORMAL; up->port.icount.rx++; @@ -156,6 +166,16 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status) *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); tty_flip_buffer_push(tty); + + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 6: + * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE] + */ + up->ier |= UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); } static void transmit_chars(struct uart_pxa_port *up) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index a3efbea5dbb..25f3094ec74 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2008,6 +2008,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) if (port->tty && port->tty->termios && termios.c_cflag == 0) termios = *(port->tty->termios); + if (console_suspend_enabled) + uart_change_pm(state, 0); uport->ops->set_termios(uport, &termios, NULL); if (console_suspend_enabled) console_start(uport->cons); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 8af1ed83a4c..0aed022d21b 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -568,8 +568,6 @@ static struct of_device_id ulite_of_match[] __devinitdata = { {} }; MODULE_DEVICE_TABLE(of, ulite_of_match); -#else /* CONFIG_OF */ -#define ulite_of_match NULL #endif /* CONFIG_OF */ static int __devinit ulite_probe(struct platform_device *pdev) @@ -609,7 +607,7 @@ static struct platform_driver ulite_platform_driver = { .driver = { .owner = THIS_MODULE, .name = "uartlite", - .of_match_table = ulite_of_match, + .of_match_table = of_match_ptr(ulite_of_match), }, }; |