diff options
Diffstat (limited to 'drivers/usb/host/uhci-hcd.c')
-rw-r--r-- | drivers/usb/host/uhci-hcd.c | 87 |
1 files changed, 47 insertions, 40 deletions
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6637e52736d..f52d04db28f 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -140,7 +140,7 @@ static void finish_reset(struct uhci_hcd *uhci) uhci->rh_state = UHCI_RH_RESET; uhci->is_stopped = UHCI_IS_STOPPED; uhci_to_hcd(uhci)->state = HC_STATE_HALT; - uhci_to_hcd(uhci)->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci->dead = 0; /* Full reset resurrects the controller */ } @@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci) */ static void configure_hc(struct uhci_hcd *uhci) { + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + /* Set the frame length to the default: 1 ms exactly */ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); @@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci) mb(); /* Enable PIRQ */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, - USBLEGSUP_DEFAULT); + pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); + + /* Disable platform-specific non-PME# wakeup */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, 0); } @@ -344,7 +349,10 @@ __acquires(uhci->lock) /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable); + if (!int_enable && wakeup_enable) + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci_scan_schedule(uhci); uhci_fsbr_off(uhci); @@ -363,7 +371,7 @@ static void start_rh(struct uhci_hcd *uhci) uhci->io_addr + USBINTR); mb(); uhci->rh_state = UHCI_RH_RUNNING; - uhci_to_hcd(uhci)->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); } static void wakeup_rh(struct uhci_hcd *uhci) @@ -589,7 +597,7 @@ static int uhci_start(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; - struct dentry *dentry; + struct dentry __maybe_unused *dentry; hcd->uses_new_polling = 1; @@ -599,18 +607,16 @@ static int uhci_start(struct usb_hcd *hcd) INIT_LIST_HEAD(&uhci->idle_qh_list); init_waitqueue_head(&uhci->waitqh); - if (DEBUG_CONFIGURED) { - dentry = debugfs_create_file(hcd->self.bus_name, - S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, - uhci, &uhci_debug_operations); - if (!dentry) { - dev_err(uhci_dev(uhci), "couldn't create uhci " - "debugfs entry\n"); - retval = -ENOMEM; - goto err_create_debug_entry; - } - uhci->dentry = dentry; +#ifdef UHCI_DEBUG_OPS + dentry = debugfs_create_file(hcd->self.bus_name, + S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, + uhci, &uhci_debug_operations); + if (!dentry) { + dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n"); + return -ENOMEM; } + uhci->dentry = dentry; +#endif uhci->frame = dma_alloc_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), @@ -691,7 +697,9 @@ static int uhci_start(struct usb_hcd *hcd) configure_hc(uhci); uhci->is_initialized = 1; + spin_lock_irq(&uhci->lock); start_rh(uhci); + spin_unlock_irq(&uhci->lock); return 0; /* @@ -722,7 +730,6 @@ err_alloc_frame_cpu: err_alloc_frame: debugfs_remove(uhci->dentry); -err_create_debug_entry: return retval; } @@ -731,7 +738,7 @@ static void uhci_stop(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); spin_lock_irq(&uhci->lock); - if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead) + if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); @@ -748,7 +755,7 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (uhci->dead) ; /* Dead controllers tell no tales */ @@ -775,7 +782,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (!uhci->dead) wakeup_rh(uhci); @@ -783,15 +790,16 @@ static int uhci_rh_resume(struct usb_hcd *hcd) return rc; } -static int uhci_pci_suspend(struct usb_hcd *hcd) +static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); int rc = 0; dev_dbg(uhci_dev(uhci), "%s\n", __func__); spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done_okay; /* Already suspended or dead */ if (uhci->rh_state > UHCI_RH_SUSPENDED) { @@ -803,11 +811,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd) /* All PCI host controllers are required to disable IRQ generation * at the source, so we must turn off PIRQ. */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); - mb(); - hcd->poll_rh = 0; - - /* FIXME: Enable non-PME# remote wakeup? */ + pci_write_config_word(pdev, USBLEGSUP, 0); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Enable platform-specific non-PME# wakeup */ + if (do_wakeup) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, + USBPORT1EN | USBPORT2EN); + } done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -826,7 +838,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) * even if the controller was dead. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - mb(); spin_lock_irq(&uhci->lock); @@ -834,8 +845,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (hibernated) uhci_hc_died(uhci); - /* FIXME: Disable non-PME# remote wakeup? */ - /* The firmware or a boot kernel may have changed the controller * settings during a system wakeup. Check it and reconfigure * to avoid problems. @@ -845,22 +854,20 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) /* If the controller was dead before, it's back alive now */ configure_hc(uhci); - if (uhci->rh_state == UHCI_RH_RESET) { - - /* The controller had to be reset */ + /* Tell the core if the controller had to be reset */ + if (uhci->rh_state == UHCI_RH_RESET) usb_root_hub_lost_power(hcd->self.root_hub); - suspend_rh(uhci, UHCI_RH_SUSPENDED); - } spin_unlock_irq(&uhci->lock); /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) { - hcd->poll_rh = 1; - usb_hcd_poll_rh_status(hcd); - } + if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Does the root hub have a port wakeup pending? */ + usb_hcd_poll_rh_status(hcd); return 0; } #endif |