summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/da8xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/da8xx.c')
-rw-r--r--drivers/usb/musb/da8xx.c170
1 files changed, 153 insertions, 17 deletions
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 84427bebbf6..69a0da3c8f0 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,8 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/da8xx.h>
#include <mach/usb.h>
@@ -78,6 +80,12 @@
#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
+struct da8xx_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+
/*
* REVISIT (PM): we should be able to keep the PHY in low power mode most
* of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
@@ -131,9 +139,9 @@ static inline void phy_off(void)
*/
/**
- * musb_platform_enable - enable interrupts
+ * da8xx_musb_enable - enable interrupts
*/
-void musb_platform_enable(struct musb *musb)
+static void da8xx_musb_enable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 mask;
@@ -151,9 +159,9 @@ void musb_platform_enable(struct musb *musb)
}
/**
- * musb_platform_disable - disable HDRC and flush interrupts
+ * da8xx_musb_disable - disable HDRC and flush interrupts
*/
-void musb_platform_disable(struct musb *musb)
+static void da8xx_musb_disable(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
@@ -170,7 +178,7 @@ void musb_platform_disable(struct musb *musb)
#define portstate(stmt)
#endif
-static void da8xx_set_vbus(struct musb *musb, int is_on)
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
{
WARN_ON(is_on && is_peripheral_active(musb));
}
@@ -252,7 +260,7 @@ static void otg_timer(unsigned long _musb)
spin_unlock_irqrestore(&musb->lock, flags);
}
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
{
static unsigned long last_timer;
@@ -282,7 +290,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
mod_timer(&otg_workaround, timeout);
}
-static irqreturn_t da8xx_interrupt(int irq, void *hci)
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
{
struct musb *musb = hci;
void __iomem *reg_base = musb->ctrl_base;
@@ -380,7 +388,7 @@ static irqreturn_t da8xx_interrupt(int irq, void *hci)
return ret;
}
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
{
u32 cfgchip2 = __raw_readl(CFGCHIP2);
@@ -409,15 +417,13 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
return 0;
}
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int da8xx_musb_init(struct musb *musb)
{
void __iomem *reg_base = musb->ctrl_base;
u32 rev;
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
- clk_enable(musb->clock);
-
/* Returns zero if e.g. not clocked */
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
if (!rev)
@@ -431,8 +437,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
- musb->board_set_vbus = da8xx_set_vbus;
-
/* Reset the controller */
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
@@ -446,14 +450,13 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
rev, __raw_readl(CFGCHIP2),
musb_readb(reg_base, DA8XX_USB_CTRL_REG));
- musb->isr = da8xx_interrupt;
+ musb->isr = da8xx_musb_interrupt;
return 0;
fail:
- clk_disable(musb->clock);
return -ENODEV;
}
-int musb_platform_exit(struct musb *musb)
+static int da8xx_musb_exit(struct musb *musb)
{
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
@@ -463,7 +466,140 @@ int musb_platform_exit(struct musb *musb)
otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
- clk_disable(musb->clock);
+ return 0;
+}
+
+static const struct musb_platform_ops da8xx_ops = {
+ .init = da8xx_musb_init,
+ .exit = da8xx_musb_exit,
+
+ .enable = da8xx_musb_enable,
+ .disable = da8xx_musb_disable,
+
+ .set_mode = da8xx_musb_set_mode,
+ .try_idle = da8xx_musb_try_idle,
+
+ .set_vbus = da8xx_musb_set_vbus,
+};
+
+static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+
+static int __init da8xx_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+ struct da8xx_glue *glue;
+
+ struct clk *clk;
+
+ int ret = -ENOMEM;
+
+ glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+ if (!glue) {
+ dev_err(&pdev->dev, "failed to allocate glue context\n");
+ goto err0;
+ }
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err1;
+ }
+
+ clk = clk_get(&pdev->dev, "usb20");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err2;
+ }
+
+ ret = clk_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err3;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &da8xx_dmamask;
+ musb->dev.coherent_dma_mask = da8xx_dmamask;
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &da8xx_ops;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err4;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err4;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err4;
+ }
+
+ return 0;
+
+err4:
+ clk_disable(clk);
+
+err3:
+ clk_put(clk);
+
+err2:
+ platform_device_put(musb);
+
+err1:
+ kfree(glue);
+
+err0:
+ return ret;
+}
+
+static int __exit da8xx_remove(struct platform_device *pdev)
+{
+ struct da8xx_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_del(glue->musb);
+ platform_device_put(glue->musb);
+ clk_disable(glue->clk);
+ clk_put(glue->clk);
+ kfree(glue);
return 0;
}
+
+static struct platform_driver da8xx_driver = {
+ .remove = __exit_p(da8xx_remove),
+ .driver = {
+ .name = "musb-da8xx",
+ },
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init da8xx_init(void)
+{
+ return platform_driver_probe(&da8xx_driver, da8xx_probe);
+}
+subsys_initcall(da8xx_init);
+
+static void __exit da8xx_exit(void)
+{
+ platform_driver_unregister(&da8xx_driver);
+}
+module_exit(da8xx_exit);