summaryrefslogtreecommitdiff
path: root/include/asm-x86/numaq
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/numaq')
-rw-r--r--include/asm-x86/numaq/apic.h136
-rw-r--r--include/asm-x86/numaq/apicdef.h14
-rw-r--r--include/asm-x86/numaq/ipi.h25
-rw-r--r--include/asm-x86/numaq/mpparse.h7
-rw-r--r--include/asm-x86/numaq/wakecpu.h43
5 files changed, 0 insertions, 225 deletions
diff --git a/include/asm-x86/numaq/apic.h b/include/asm-x86/numaq/apic.h
deleted file mode 100644
index 0bf2a06b7a4..00000000000
--- a/include/asm-x86/numaq/apic.h
+++ /dev/null
@@ -1,136 +0,0 @@
-#ifndef __ASM_NUMAQ_APIC_H
-#define __ASM_NUMAQ_APIC_H
-
-#include <asm/io.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-
-#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
-
-static inline cpumask_t target_cpus(void)
-{
- return CPU_MASK_ALL;
-}
-
-#define NO_BALANCE_IRQ (1)
-#define esr_disable (1)
-
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return physid_isset(apicid, bitmap);
-}
-static inline unsigned long check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-#define apicid_cluster(apicid) (apicid & 0xF0)
-
-static inline int apic_id_registered(void)
-{
- return 1;
-}
-
-static inline void init_apic_ldr(void)
-{
- /* Already done in NUMA-Q firmware */
-}
-
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- "NUMA-Q", nr_ioapics);
-}
-
-/*
- * Skip adding the timer int on secondary nodes, which causes
- * a small but painful rift in the time-space continuum.
- */
-static inline int multi_timer_check(int apic, int irq)
-{
- return apic != 0 && irq == 0;
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
- /* We don't have a good way to do this yet - hack */
- return physids_promote(0xFUL);
-}
-
-/* Mapping from cpu number to logical apicid */
-extern u8 cpu_2_logical_apicid[];
-static inline int cpu_to_logical_apicid(int cpu)
-{
- if (cpu >= NR_CPUS)
- return BAD_APICID;
- return (int)cpu_2_logical_apicid[cpu];
-}
-
-/*
- * Supporting over 60 cpus on NUMA-Q requires a locality-dependent
- * cpu to APIC ID relation to properly interact with the intelligent
- * mode of the cluster controller.
- */
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (mps_cpu < 60)
- return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
- else
- return BAD_APICID;
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
- return logical_apicid >> 4;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
-{
- int node = apicid_to_node(logical_apicid);
- int cpu = __ffs(logical_apicid & 0xf);
-
- return physid_mask_of_physid(cpu + 4*node);
-}
-
-extern void *xquad_portio;
-
-static inline void setup_portio_remap(void)
-{
- int num_quads = num_online_nodes();
-
- if (num_quads <= 1)
- return;
-
- printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
- xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
- printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
- (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
- return (1);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-/*
- * We use physical apicids here, not logical, so just return the default
- * physical broadcast to stop people from breaking us
- */
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- return (int) 0xF;
-}
-
-/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_NUMAQ_APIC_H */
diff --git a/include/asm-x86/numaq/apicdef.h b/include/asm-x86/numaq/apicdef.h
deleted file mode 100644
index e012a46cc22..00000000000
--- a/include/asm-x86/numaq/apicdef.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_NUMAQ_APICDEF_H
-#define __ASM_NUMAQ_APICDEF_H
-
-
-#define APIC_ID_MASK (0xF<<24)
-
-static inline unsigned get_apic_id(unsigned long x)
-{
- return (((x)>>24)&0x0F);
-}
-
-#define GET_APIC_ID(x) get_apic_id(x)
-
-#endif
diff --git a/include/asm-x86/numaq/ipi.h b/include/asm-x86/numaq/ipi.h
deleted file mode 100644
index 935588d286c..00000000000
--- a/include/asm-x86/numaq/ipi.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_NUMAQ_IPI_H
-#define __ASM_NUMAQ_IPI_H
-
-void send_IPI_mask_sequence(cpumask_t, int vector);
-
-static inline void send_IPI_mask(cpumask_t mask, int vector)
-{
- send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void send_IPI_allbutself(int vector)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
-
- if (!cpus_empty(mask))
- send_IPI_mask(mask, vector);
-}
-
-static inline void send_IPI_all(int vector)
-{
- send_IPI_mask(cpu_online_map, vector);
-}
-
-#endif /* __ASM_NUMAQ_IPI_H */
diff --git a/include/asm-x86/numaq/mpparse.h b/include/asm-x86/numaq/mpparse.h
deleted file mode 100644
index 252292e077b..00000000000
--- a/include/asm-x86/numaq/mpparse.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_NUMAQ_MPPARSE_H
-#define __ASM_NUMAQ_MPPARSE_H
-
-extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid);
-
-#endif /* __ASM_NUMAQ_MPPARSE_H */
diff --git a/include/asm-x86/numaq/wakecpu.h b/include/asm-x86/numaq/wakecpu.h
deleted file mode 100644
index c577bda5b1c..00000000000
--- a/include/asm-x86/numaq/wakecpu.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_NUMAQ_WAKECPU_H
-#define __ASM_NUMAQ_WAKECPU_H
-
-/* This file copes with machines that wakeup secondary CPUs by NMIs */
-
-#define WAKE_SECONDARY_VIA_NMI
-
-#define TRAMPOLINE_LOW phys_to_virt(0x8)
-#define TRAMPOLINE_HIGH phys_to_virt(0xa)
-
-#define boot_cpu_apicid boot_cpu_logical_apicid
-
-/* We don't do anything here because we use NMI's to boot instead */
-static inline void wait_for_init_deassert(atomic_t *deassert)
-{
-}
-
-/*
- * Because we use NMIs rather than the INIT-STARTUP sequence to
- * bootstrap the CPUs, the APIC may be in a weird state. Kick it.
- */
-static inline void smp_callin_clear_local_apic(void)
-{
- clear_local_APIC();
-}
-
-static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
-{
- printk("Storing NMI vector\n");
- *high = *((volatile unsigned short *) TRAMPOLINE_HIGH);
- *low = *((volatile unsigned short *) TRAMPOLINE_LOW);
-}
-
-static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
-{
- printk("Restoring NMI vector\n");
- *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high;
- *((volatile unsigned short *) TRAMPOLINE_LOW) = *low;
-}
-
-#define inquire_remote_apic(apicid) {}
-
-#endif /* __ASM_NUMAQ_WAKECPU_H */