diff options
Diffstat (limited to 'include')
31 files changed, 432 insertions, 346 deletions
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index d12f077a6da..12e023c19ac 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -12,17 +12,9 @@ #ifndef __AMBA_PL330_H_ #define __AMBA_PL330_H_ +#include <linux/dmaengine.h> #include <asm/hardware/pl330.h> -struct dma_pl330_peri { - /* - * Peri_Req i/f of the DMAC that is - * peripheral could be reached from. - */ - u8 peri_id; /* specific dma id */ - enum pl330_reqtype rqtype; -}; - struct dma_pl330_platdata { /* * Number of valid peripherals connected to DMAC. @@ -33,9 +25,12 @@ struct dma_pl330_platdata { */ u8 nr_valid_peri; /* Array of valid peripherals */ - struct dma_pl330_peri *peri; + u8 *peri_id; + /* Operational capabilities */ + dma_cap_mask_t cap_mask; /* Bytes to allocate for MC buffer */ unsigned mcbuf_sz; }; +extern bool pl330_filter(struct dma_chan *chan, void *param); #endif /* __AMBA_PL330_H_ */ diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h index 9a26c83a2c9..b856a2a590d 100644 --- a/include/linux/ata_platform.h +++ b/include/linux/ata_platform.h @@ -27,10 +27,7 @@ extern int __devexit __pata_platform_remove(struct device *dev); /* * Marvell SATA private data */ -struct mbus_dram_target_info; - struct mv_sata_platform_data { - struct mbus_dram_target_info *dram; int n_ports; /* number of sata ports */ }; diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index a17becc36ca..e9b602151ca 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -457,6 +457,28 @@ void cgroup_exclude_rmdir(struct cgroup_subsys_state *css); void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css); /* + * Control Group taskset, used to pass around set of tasks to cgroup_subsys + * methods. + */ +struct cgroup_taskset; +struct task_struct *cgroup_taskset_first(struct cgroup_taskset *tset); +struct task_struct *cgroup_taskset_next(struct cgroup_taskset *tset); +struct cgroup *cgroup_taskset_cur_cgroup(struct cgroup_taskset *tset); +int cgroup_taskset_size(struct cgroup_taskset *tset); + +/** + * cgroup_taskset_for_each - iterate cgroup_taskset + * @task: the loop cursor + * @skip_cgrp: skip if task's cgroup matches this, %NULL to iterate through all + * @tset: taskset to iterate + */ +#define cgroup_taskset_for_each(task, skip_cgrp, tset) \ + for ((task) = cgroup_taskset_first((tset)); (task); \ + (task) = cgroup_taskset_next((tset))) \ + if (!(skip_cgrp) || \ + cgroup_taskset_cur_cgroup((tset)) != (skip_cgrp)) + +/* * Control Group subsystem type. * See Documentation/cgroups/cgroups.txt for details */ @@ -467,14 +489,11 @@ struct cgroup_subsys { int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp); int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct task_struct *tsk); - int (*can_attach_task)(struct cgroup *cgrp, struct task_struct *tsk); + struct cgroup_taskset *tset); void (*cancel_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct task_struct *tsk); - void (*pre_attach)(struct cgroup *cgrp); - void (*attach_task)(struct cgroup *cgrp, struct task_struct *tsk); + struct cgroup_taskset *tset); void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup *old_cgrp, struct task_struct *tsk); + struct cgroup_taskset *tset); void (*fork)(struct cgroup_subsys *ss, struct task_struct *task); void (*exit)(struct cgroup_subsys *ss, struct cgroup *cgrp, struct cgroup *old_cgrp, struct task_struct *task); diff --git a/include/linux/clk.h b/include/linux/clk.h index 7213b52b2c0..b9d46fa154b 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -107,6 +107,28 @@ static inline void clk_unprepare(struct clk *clk) } #endif +/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */ +static inline int clk_prepare_enable(struct clk *clk) +{ + int ret; + + ret = clk_prepare(clk); + if (ret) + return ret; + ret = clk_enable(clk); + if (ret) + clk_unprepare(clk); + + return ret; +} + +/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */ +static inline void clk_disable_unprepare(struct clk *clk) +{ + clk_disable(clk); + clk_unprepare(clk); +} + /** * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. * This is only valid once the clock source has been enabled. diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h new file mode 100644 index 00000000000..05071ee34c3 --- /dev/null +++ b/include/linux/gpio-pxa.h @@ -0,0 +1,16 @@ +#ifndef __GPIO_PXA_H +#define __GPIO_PXA_H + +#define GPIO_bit(x) (1 << ((x) & 0x1f)) + +#define gpio_to_bank(gpio) ((gpio) >> 5) + +/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). + * Those cases currently cause holes in the GPIO number space, the + * actual number of the last GPIO is recorded by 'pxa_last_gpio'. + */ +extern int pxa_last_gpio; + +extern int pxa_irq_to_gpio(int irq); + +#endif /* __GPIO_PXA_H */ diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 12ec328481d..62b908e0e59 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -35,7 +35,7 @@ #include <linux/mod_devicetable.h> -#define MAX_PAGE_BUFFER_COUNT 16 +#define MAX_PAGE_BUFFER_COUNT 18 #define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ #pragma pack(push, 1) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 32574eef939..9c66b1ada9d 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -23,11 +23,10 @@ extern struct files_struct init_files; extern struct fs_struct init_fs; #ifdef CONFIG_CGROUPS -#define INIT_THREADGROUP_FORK_LOCK(sig) \ - .threadgroup_fork_lock = \ - __RWSEM_INITIALIZER(sig.threadgroup_fork_lock), +#define INIT_GROUP_RWSEM(sig) \ + .group_rwsem = __RWSEM_INITIALIZER(sig.group_rwsem), #else -#define INIT_THREADGROUP_FORK_LOCK(sig) +#define INIT_GROUP_RWSEM(sig) #endif #define INIT_SIGNALS(sig) { \ @@ -46,7 +45,7 @@ extern struct fs_struct init_fs; }, \ .cred_guard_mutex = \ __MUTEX_INITIALIZER(sig.cred_guard_mutex), \ - INIT_THREADGROUP_FORK_LOCK(sig) \ + INIT_GROUP_RWSEM(sig) \ } extern struct nsproxy init_nsproxy; diff --git a/include/linux/jbd.h b/include/linux/jbd.h index c7acdde3243..d211732b9e9 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -497,7 +497,6 @@ struct transaction_s * @j_format_version: Version of the superblock format * @j_state_lock: Protect the various scalars in the journal * @j_barrier_count: Number of processes waiting to create a barrier lock - * @j_barrier: The barrier lock itself * @j_running_transaction: The current running transaction.. * @j_committing_transaction: the transaction we are pushing to disk * @j_checkpoint_transactions: a linked circular list of all transactions @@ -580,9 +579,6 @@ struct journal_s */ int j_barrier_count; - /* The barrier lock itself */ - struct mutex j_barrier; - /* * Transactions: The current running transaction... * [j_state_lock] [caller holding open handle] @@ -913,6 +909,7 @@ extern int journal_set_revoke(journal_t *, unsigned int, tid_t); extern int journal_test_revoke(journal_t *, unsigned int, tid_t); extern void journal_clear_revoke(journal_t *); extern void journal_switch_revoke_table(journal_t *journal); +extern void journal_clear_buffer_revoked_flags(journal_t *journal); /* * The log thread user interface: diff --git a/include/linux/mbus.h b/include/linux/mbus.h index c11ff293254..efa1a6d7aca 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -32,5 +32,16 @@ struct mbus_dram_target_info } cs[4]; }; - +/* + * The Marvell mbus is to be found only on SOCs from the Orion family + * at the moment. Provide a dummy stub for other architectures. + */ +#ifdef CONFIG_PLAT_ORION +extern const struct mbus_dram_target_info *mv_mbus_dram_info(void); +#else +static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void) +{ + return NULL; +} +#endif #endif diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 9b296ea41bb..f944591765e 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -390,7 +390,6 @@ enum { OVER_LIMIT, }; -#ifdef CONFIG_INET struct sock; #ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM void sock_update_memcg(struct sock *sk); @@ -403,6 +402,5 @@ static inline void sock_release_memcg(struct sock *sk) { } #endif /* CONFIG_CGROUP_MEM_RES_CTLR_KMEM */ -#endif /* CONFIG_INET */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index a1d109590da..0eac07c9525 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2155,7 +2155,7 @@ extern void netdev_run_todo(void); */ static inline void dev_put(struct net_device *dev) { - irqsafe_cpu_dec(*dev->pcpu_refcnt); + this_cpu_dec(*dev->pcpu_refcnt); } /** @@ -2166,7 +2166,7 @@ static inline void dev_put(struct net_device *dev) */ static inline void dev_hold(struct net_device *dev) { - irqsafe_cpu_inc(*dev->pcpu_refcnt); + this_cpu_inc(*dev->pcpu_refcnt); } /* Carrier loss detection, dial on demand. The functions netif_carrier_on @@ -2450,6 +2450,11 @@ static inline void netif_addr_lock(struct net_device *dev) spin_lock(&dev->addr_list_lock); } +static inline void netif_addr_lock_nested(struct net_device *dev) +{ + spin_lock_nested(&dev->addr_list_lock, SINGLE_DEPTH_NESTING); +} + static inline void netif_addr_lock_bh(struct net_device *dev) { spin_lock_bh(&dev->addr_list_lock); diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 32cddf78b13..8d674a78674 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -471,7 +471,7 @@ DECLARE_PER_CPU(seqcount_t, xt_recseq); * * Begin packet processing : all readers must wait the end * 1) Must be called with preemption disabled - * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add()) + * 2) softirqs must be disabled too (or we should use this_cpu_add()) * Returns : * 1 if no recursion on this cpu * 0 if recursion detected @@ -503,7 +503,7 @@ static inline unsigned int xt_write_recseq_begin(void) * * End packet processing : all readers can proceed * 1) Must be called with preemption disabled - * 2) softirqs must be disabled too (or we should use irqsafe_cpu_add()) + * 2) softirqs must be disabled too (or we should use this_cpu_add()) */ static inline void xt_write_recseq_end(unsigned int addend) { diff --git a/include/linux/nls.h b/include/linux/nls.h index d47beef08df..5dc635f8d79 100644 --- a/include/linux/nls.h +++ b/include/linux/nls.h @@ -43,7 +43,7 @@ enum utf16_endian { UTF16_BIG_ENDIAN }; -/* nls.c */ +/* nls_base.c */ extern int register_nls(struct nls_table *); extern int unregister_nls(struct nls_table *); extern struct nls_table *load_nls(char *); @@ -52,7 +52,8 @@ extern struct nls_table *load_nls_default(void); extern int utf8_to_utf32(const u8 *s, int len, unicode_t *pu); extern int utf32_to_utf8(unicode_t u, u8 *s, int maxlen); -extern int utf8s_to_utf16s(const u8 *s, int len, wchar_t *pwcs); +extern int utf8s_to_utf16s(const u8 *s, int len, + enum utf16_endian endian, wchar_t *pwcs, int maxlen); extern int utf16s_to_utf8s(const wchar_t *pwcs, int len, enum utf16_endian endian, u8 *s, int maxlen); diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 9ca008f0c54..32cd1f67462 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -172,10 +172,10 @@ extern phys_addr_t per_cpu_ptr_to_phys(void *addr); * equal char, int or long. percpu_read() evaluates to a lvalue and * all others to void. * - * These operations are guaranteed to be atomic w.r.t. preemption. - * The generic versions use plain get/put_cpu_var(). Archs are + * These operations are guaranteed to be atomic. + * The generic versions disable interrupts. Archs are * encouraged to implement single-instruction alternatives which don't - * require preemption protection. + * require protection. */ #ifndef percpu_read # define percpu_read(var) \ @@ -347,9 +347,10 @@ do { \ #define _this_cpu_generic_to_op(pcp, val, op) \ do { \ - preempt_disable(); \ + unsigned long flags; \ + local_irq_save(flags); \ *__this_cpu_ptr(&(pcp)) op val; \ - preempt_enable(); \ + local_irq_restore(flags); \ } while (0) #ifndef this_cpu_write @@ -447,10 +448,11 @@ do { \ #define _this_cpu_generic_add_return(pcp, val) \ ({ \ typeof(pcp) ret__; \ - preempt_disable(); \ + unsigned long flags; \ + local_irq_save(flags); \ __this_cpu_add(pcp, val); \ ret__ = __this_cpu_read(pcp); \ - preempt_enable(); \ + local_irq_restore(flags); \ ret__; \ }) @@ -476,10 +478,11 @@ do { \ #define _this_cpu_generic_xchg(pcp, nval) \ ({ typeof(pcp) ret__; \ - preempt_disable(); \ + unsigned long flags; \ + local_irq_save(flags); \ ret__ = __this_cpu_read(pcp); \ __this_cpu_write(pcp, nval); \ - preempt_enable(); \ + local_irq_restore(flags); \ ret__; \ }) @@ -501,12 +504,14 @@ do { \ #endif #define _this_cpu_generic_cmpxchg(pcp, oval, nval) \ -({ typeof(pcp) ret__; \ - preempt_disable(); \ +({ \ + typeof(pcp) ret__; \ + unsigned long flags; \ + local_irq_save(flags); \ ret__ = __this_cpu_read(pcp); \ if (ret__ == (oval)) \ __this_cpu_write(pcp, nval); \ - preempt_enable(); \ + local_irq_restore(flags); \ ret__; \ }) @@ -538,10 +543,11 @@ do { \ #define _this_cpu_generic_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) \ ({ \ int ret__; \ - preempt_disable(); \ + unsigned long flags; \ + local_irq_save(flags); \ ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2, \ oval1, oval2, nval1, nval2); \ - preempt_enable(); \ + local_irq_restore(flags); \ ret__; \ }) @@ -567,9 +573,9 @@ do { \ #endif /* - * Generic percpu operations that do not require preemption handling. + * Generic percpu operations for context that are safe from preemption/interrupts. * Either we do not care about races or the caller has the - * responsibility of handling preemptions issues. Arch code can still + * responsibility of handling preemption/interrupt issues. Arch code can still * override these instructions since the arch per cpu code may be more * efficient and may actually get race freeness for free (that is the * case for x86 for example). @@ -802,156 +808,4 @@ do { \ __pcpu_double_call_return_bool(__this_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2)) #endif -/* - * IRQ safe versions of the per cpu RMW operations. Note that these operations - * are *not* safe against modification of the same variable from another - * processors (which one gets when using regular atomic operations) - * They are guaranteed to be atomic vs. local interrupts and - * preemption only. - */ -#define irqsafe_cpu_generic_to_op(pcp, val, op) \ -do { \ - unsigned long flags; \ - local_irq_save(flags); \ - *__this_cpu_ptr(&(pcp)) op val; \ - local_irq_restore(flags); \ -} while (0) - -#ifndef irqsafe_cpu_add -# ifndef irqsafe_cpu_add_1 -# define irqsafe_cpu_add_1(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), +=) -# endif -# ifndef irqsafe_cpu_add_2 -# define irqsafe_cpu_add_2(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), +=) -# endif -# ifndef irqsafe_cpu_add_4 -# define irqsafe_cpu_add_4(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), +=) -# endif -# ifndef irqsafe_cpu_add_8 -# define irqsafe_cpu_add_8(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), +=) -# endif -# define irqsafe_cpu_add(pcp, val) __pcpu_size_call(irqsafe_cpu_add_, (pcp), (val)) -#endif - -#ifndef irqsafe_cpu_sub -# define irqsafe_cpu_sub(pcp, val) irqsafe_cpu_add((pcp), -(val)) -#endif - -#ifndef irqsafe_cpu_inc -# define irqsafe_cpu_inc(pcp) irqsafe_cpu_add((pcp), 1) -#endif - -#ifndef irqsafe_cpu_dec -# define irqsafe_cpu_dec(pcp) irqsafe_cpu_sub((pcp), 1) -#endif - -#ifndef irqsafe_cpu_and -# ifndef irqsafe_cpu_and_1 -# define irqsafe_cpu_and_1(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), &=) -# endif -# ifndef irqsafe_cpu_and_2 -# define irqsafe_cpu_and_2(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), &=) -# endif -# ifndef irqsafe_cpu_and_4 -# define irqsafe_cpu_and_4(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), &=) -# endif -# ifndef irqsafe_cpu_and_8 -# define irqsafe_cpu_and_8(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), &=) -# endif -# define irqsafe_cpu_and(pcp, val) __pcpu_size_call(irqsafe_cpu_and_, (val)) -#endif - -#ifndef irqsafe_cpu_or -# ifndef irqsafe_cpu_or_1 -# define irqsafe_cpu_or_1(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), |=) -# endif -# ifndef irqsafe_cpu_or_2 -# define irqsafe_cpu_or_2(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), |=) -# endif -# ifndef irqsafe_cpu_or_4 -# define irqsafe_cpu_or_4(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), |=) -# endif -# ifndef irqsafe_cpu_or_8 -# define irqsafe_cpu_or_8(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), |=) -# endif -# define irqsafe_cpu_or(pcp, val) __pcpu_size_call(irqsafe_cpu_or_, (val)) -#endif - -#ifndef irqsafe_cpu_xor -# ifndef irqsafe_cpu_xor_1 -# define irqsafe_cpu_xor_1(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), ^=) -# endif -# ifndef irqsafe_cpu_xor_2 -# define irqsafe_cpu_xor_2(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), ^=) -# endif -# ifndef irqsafe_cpu_xor_4 -# define irqsafe_cpu_xor_4(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), ^=) -# endif -# ifndef irqsafe_cpu_xor_8 -# define irqsafe_cpu_xor_8(pcp, val) irqsafe_cpu_generic_to_op((pcp), (val), ^=) -# endif -# define irqsafe_cpu_xor(pcp, val) __pcpu_size_call(irqsafe_cpu_xor_, (val)) -#endif - -#define irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) \ -({ \ - typeof(pcp) ret__; \ - unsigned long flags; \ - local_irq_save(flags); \ - ret__ = __this_cpu_read(pcp); \ - if (ret__ == (oval)) \ - __this_cpu_write(pcp, nval); \ - local_irq_restore(flags); \ - ret__; \ -}) - -#ifndef irqsafe_cpu_cmpxchg -# ifndef irqsafe_cpu_cmpxchg_1 -# define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) -# endif -# ifndef irqsafe_cpu_cmpxchg_2 -# define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) -# endif -# ifndef irqsafe_cpu_cmpxchg_4 -# define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) -# endif -# ifndef irqsafe_cpu_cmpxchg_8 -# define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) irqsafe_cpu_generic_cmpxchg(pcp, oval, nval) -# endif -# define irqsafe_cpu_cmpxchg(pcp, oval, nval) \ - __pcpu_size_call_return2(irqsafe_cpu_cmpxchg_, (pcp), oval, nval) -#endif - -#define irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) \ -({ \ - int ret__; \ - unsigned long flags; \ - local_irq_save(flags); \ - ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2, \ - oval1, oval2, nval1, nval2); \ - local_irq_restore(flags); \ - ret__; \ -}) - -#ifndef irqsafe_cpu_cmpxchg_double -# ifndef irqsafe_cpu_cmpxchg_double_1 -# define irqsafe_cpu_cmpxchg_double_1(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) -# endif -# ifndef irqsafe_cpu_cmpxchg_double_2 -# define irqsafe_cpu_cmpxchg_double_2(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) -# endif -# ifndef irqsafe_cpu_cmpxchg_double_4 -# define irqsafe_cpu_cmpxchg_double_4(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) -# endif -# ifndef irqsafe_cpu_cmpxchg_double_8 -# define irqsafe_cpu_cmpxchg_double_8(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - irqsafe_generic_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) -# endif -# define irqsafe_cpu_cmpxchg_double(pcp1, pcp2, oval1, oval2, nval1, nval2) \ - __pcpu_double_call_return_bool(irqsafe_cpu_cmpxchg_double_, (pcp1), (pcp2), (oval1), (oval2), (nval1), (nval2)) -#endif - #endif /* __LINUX_PERCPU_H */ diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h new file mode 100644 index 00000000000..b081c7245ec --- /dev/null +++ b/include/linux/platform_data/macb.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACB_PDATA_H__ +#define __MACB_PDATA_H__ + +struct macb_platform_data { + u32 phy_mask; + int phy_irq_pin; /* PHY IRQ */ + u8 is_rmii; /* using RMII interface? */ +}; + +#endif /* __MACB_PDATA_H__ */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index e9d9149ddf3..d94804aca76 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -42,9 +42,23 @@ struct mv_usb_platform_data { /* only valid for HCD. OTG or Host only*/ unsigned int mode; - int (*phy_init)(unsigned int regbase); - void (*phy_deinit)(unsigned int regbase); + /* This flag is used for that needs id pin checked by otg */ + unsigned int disable_otg_clock_gating:1; + /* Force a_bus_req to be asserted */ + unsigned int otg_force_a_bus_req:1; + + int (*phy_init)(void __iomem *regbase); + void (*phy_deinit)(void __iomem *regbase); int (*set_vbus)(unsigned int vbus); + int (*private_init)(void __iomem *opregs, void __iomem *phyregs); }; +#ifndef CONFIG_HAVE_CLK +/* Dummy stub for clk framework */ +#define clk_get(dev, id) NULL +#define clk_put(clock) do {} while (0) +#define clk_enable(clock) do {} while (0) +#define clk_disable(clock) do {} while (0) +#endif + #endif diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h new file mode 100644 index 00000000000..6fa109339bf --- /dev/null +++ b/include/linux/platform_data/s3c-hsudc.h @@ -0,0 +1,34 @@ +/* + * S3C24XX USB 2.0 High-speed USB controller gadget driver + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. + * Each endpoint can be configured as either in or out endpoint. Endpoints + * can be configured for Bulk or Interrupt transfer mode. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSUDC_H +#define __LINUX_USB_S3C_HSUDC_H + +/** + * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. + * @epnum: Number of endpoints to be instantiated by the controller driver. + * @gpio_init: Platform specific USB related GPIO initialization. + * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. + * + * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget + * controllers. + */ +struct s3c24xx_hsudc_platdata { + unsigned int epnum; + void (*gpio_init)(void); + void (*gpio_uninit)(void); +}; + +#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index ad93e1ec8c6..f044f66018f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -637,13 +637,15 @@ struct signal_struct { #endif #ifdef CONFIG_CGROUPS /* - * The threadgroup_fork_lock prevents threads from forking with - * CLONE_THREAD while held for writing. Use this for fork-sensitive - * threadgroup-wide operations. It's taken for reading in fork.c in - * copy_process(). - * Currently only needed write-side by cgroups. + * group_rwsem prevents new tasks from entering the threadgroup and + * member tasks from exiting,a more specifically, setting of + * PF_EXITING. fork and exit paths are protected with this rwsem + * using threadgroup_change_begin/end(). Users which require + * threadgroup to remain stable should use threadgroup_[un]lock() + * which also takes care of exec path. Currently, cgroup is the + * only user. */ - struct rw_semaphore threadgroup_fork_lock; + struct rw_semaphore group_rwsem; #endif int oom_adj; /* OOM kill score adjustment (bit shift) */ @@ -2394,29 +2396,62 @@ static inline void unlock_task_sighand(struct task_struct *tsk, spin_unlock_irqrestore(&tsk->sighand->siglock, *flags); } -/* See the declaration of threadgroup_fork_lock in signal_struct. */ #ifdef CONFIG_CGROUPS -static inline void threadgroup_fork_read_lock(struct task_struct *tsk) +static inline void threadgroup_change_begin(struct task_struct *tsk) { - down_read(&tsk->signal->threadgroup_fork_lock); + down_read(&tsk->signal->group_rwsem); } -static inline void threadgroup_fork_read_unlock(struct task_struct *tsk) +static inline void threadgroup_change_end(struct task_struct *tsk) { - up_read(&tsk->signal->threadgroup_fork_lock); + up_read(&tsk->signal->group_rwsem); } -static inline void threadgroup_fork_write_lock(struct task_struct *tsk) + +/** + * threadgroup_lock - lock threadgroup + * @tsk: member task of the threadgroup to lock + * + * Lock the threadgroup @tsk belongs to. No new task is allowed to enter + * and member tasks aren't allowed to exit (as indicated by PF_EXITING) or + * perform exec. This is useful for cases where the threadgroup needs to + * stay stable across blockable operations. + * + * fork and exit paths explicitly call threadgroup_change_{begin|end}() for + * synchronization. While held, no new task will be added to threadgroup + * and no existing live task will have its PF_EXITING set. + * + * During exec, a task goes and puts its thread group through unusual + * changes. After de-threading, exclusive access is assumed to resources + * which are usually shared by tasks in the same group - e.g. sighand may + * be replaced with a new one. Also, the exec'ing task takes over group + * leader role including its pid. Exclude these changes while locked by + * grabbing cred_guard_mutex which is used to synchronize exec path. + */ +static inline void threadgroup_lock(struct task_struct *tsk) { - down_write(&tsk->signal->threadgroup_fork_lock); + /* + * exec uses exit for de-threading nesting group_rwsem inside + * cred_guard_mutex. Grab cred_guard_mutex first. + */ + mutex_lock(&tsk->signal->cred_guard_mutex); + down_write(&tsk->signal->group_rwsem); } -static inline void threadgroup_fork_write_unlock(struct task_struct *tsk) + +/** + * threadgroup_unlock - unlock threadgroup + * @tsk: member task of the threadgroup to unlock + * + * Reverse threadgroup_lock(). + */ +static inline void threadgroup_unlock(struct task_struct *tsk) { - up_write(&tsk->signal->threadgroup_fork_lock); + up_write(&tsk->signal->group_rwsem); + mutex_unlock(&tsk->signal->cred_guard_mutex); } #else -static inline void threadgroup_fork_read_lock(struct task_struct *tsk) {} -static inline void threadgroup_fork_read_unlock(struct task_struct *tsk) {} -static inline void threadgroup_fork_write_lock(struct task_struct *tsk) {} -static inline void threadgroup_fork_write_unlock(struct task_struct *tsk) {} +static inline void threadgroup_change_begin(struct task_struct *tsk) {} +static inline void threadgroup_change_end(struct task_struct *tsk) {} +static inline void threadgroup_lock(struct task_struct *tsk) {} +static inline void threadgroup_unlock(struct task_struct *tsk) {} #endif #ifndef __HAVE_THREAD_FUNCTIONS diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 1f05bbeac01..8f012f8ac8e 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -66,6 +66,7 @@ enum { * dependent on the 8250 driver. */ struct uart_port; +struct uart_8250_port; int serial8250_register_port(struct uart_port *); void serial8250_unregister_port(int line); @@ -81,7 +82,11 @@ extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); extern void serial8250_do_pm(struct uart_port *port, unsigned int state, unsigned int oldstate); +extern int fsl8250_handle_irq(struct uart_port *port); int serial8250_handle_irq(struct uart_port *port, unsigned int iir); +unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); +void serial8250_tx_chars(struct uart_8250_port *up); +unsigned int serial8250_modem_status(struct uart_8250_port *up); extern void serial8250_set_isa_configurator(void (*v) (int port, struct uart_port *up, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index eadf33d0abb..b67305e3ad5 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -351,6 +351,7 @@ struct uart_port { #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) +#define UPF_IIR_ONCE ((__force upf_t) (1 << 26)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) @@ -483,10 +484,19 @@ static inline int uart_tx_stopped(struct uart_port *port) /* * The following are helper functions for the low level drivers. */ + +extern void uart_handle_dcd_change(struct uart_port *uport, + unsigned int status); +extern void uart_handle_cts_change(struct uart_port *uport, + unsigned int status); + +extern void uart_insert_char(struct uart_port *port, unsigned int status, + unsigned int overrun, unsigned int ch, unsigned int flag); + +#ifdef SUPPORT_SYSRQ static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { -#ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { handle_sysrq(ch); @@ -495,11 +505,10 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) } port->sysrq = 0; } -#endif return 0; } -#ifndef SUPPORT_SYSRQ -#define uart_handle_sysrq_char(port,ch) uart_handle_sysrq_char(port, 0) +#else +#define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; }) #endif /* @@ -522,89 +531,6 @@ static inline int uart_handle_break(struct uart_port *port) return 0; } -/** - * uart_handle_dcd_change - handle a change of carrier detect state - * @uport: uart_port structure for the open port - * @status: new carrier detect status, nonzero if active - */ -static inline void -uart_handle_dcd_change(struct uart_port *uport, unsigned int status) -{ - struct uart_state *state = uport->state; - struct tty_port *port = &state->port; - struct tty_ldisc *ld = tty_ldisc_ref(port->tty); - struct pps_event_time ts; - - if (ld && ld->ops->dcd_change) - pps_get_ts(&ts); - - uport->icount.dcd++; -#ifdef CONFIG_HARD_PPS - if ((uport->flags & UPF_HARDPPS_CD) && status) - hardpps(); -#endif - - if (port->flags & ASYNC_CHECK_CD) { - if (status) - wake_up_interruptible(&port->open_wait); - else if (port->tty) - tty_hangup(port->tty); - } - - if (ld && ld->ops->dcd_change) - ld->ops->dcd_change(port->tty, status, &ts); - if (ld) - tty_ldisc_deref(ld); -} - -/** - * uart_handle_cts_change - handle a change of clear-to-send state - * @uport: uart_port structure for the open port - * @status: new clear to send status, nonzero if active - */ -static inline void -uart_handle_cts_change(struct uart_port *uport, unsigned int status) -{ - struct tty_port *port = &uport->state->port; - struct tty_struct *tty = port->tty; - - uport->icount.cts++; - - if (port->flags & ASYNC_CTS_FLOW) { - if (tty->hw_stopped) { - if (status) { - tty->hw_stopped = 0; - uport->ops->start_tx(uport); - uart_write_wakeup(uport); - } - } else { - if (!status) { - tty->hw_stopped = 1; - uport->ops->stop_tx(uport); - } - } - } -} - -#include <linux/tty_flip.h> - -static inline void -uart_insert_char(struct uart_port *port, unsigned int status, - unsigned int overrun, unsigned int ch, unsigned int flag) -{ - struct tty_struct *tty = port->state->port.tty; - - if ((status & port->ignore_status_mask & ~overrun) == 0) - tty_insert_flip_char(tty, ch, flag); - - /* - * Overrun is special. Since it's reported immediately, - * it doesn't affect the current character. - */ - if (status & ~port->ignore_status_mask & overrun) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -} - /* * UART_ENABLE_MS - determine if port should enable modem status irqs */ diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index d00e0bacda9..fbd1117fdfd 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -15,8 +15,6 @@ #include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */ #include <linux/compiler.h> -#include <trace/events/kmem.h> - /* * struct kmem_cache * diff --git a/include/linux/usb.h b/include/linux/usb.h index 7f8d4d61ca4..27a4e16d2bf 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1233,6 +1233,7 @@ struct urb { void *transfer_buffer; /* (in) associated data buffer */ dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ struct scatterlist *sg; /* (in) scatter gather buffer list */ + int num_mapped_sgs; /* (internal) mapped sg entries */ int num_sgs; /* (in) number of entries in the sg list */ u32 transfer_buffer_length; /* (in) data buffer length */ u32 actual_length; /* (return) actual transfer length */ @@ -1610,6 +1611,19 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) /* ----------------------------------------------------------------------- */ +/* translate USB error codes to codes user space understands */ +static inline int usb_translate_errors(int error_code) +{ + switch (error_code) { + case 0: + case -ENOMEM: + case -ENODEV: + return error_code; + default: + return -EIO; + } +} + /* Events from the usb core */ #define USB_DEVICE_ADD 0x0001 #define USB_DEVICE_REMOVE 0x0002 diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h index 4ebaf082417..31fdb4c6ee3 100644 --- a/include/linux/usb/ch11.h +++ b/include/linux/usb/ch11.h @@ -26,7 +26,6 @@ #define HUB_RESET_TT 9 #define HUB_GET_TT_STATE 10 #define HUB_STOP_TT 11 -#define HUB_SET_DEPTH 12 /* * Hub class additional requests defined by USB 3.0 spec @@ -165,11 +164,20 @@ struct usb_port_status { * wHubCharacteristics (masks) * See USB 2.0 spec Table 11-13, offset 3 */ -#define HUB_CHAR_LPSM 0x0003 /* D1 .. D0 */ -#define HUB_CHAR_COMPOUND 0x0004 /* D2 */ -#define HUB_CHAR_OCPM 0x0018 /* D4 .. D3 */ -#define HUB_CHAR_TTTT 0x0060 /* D6 .. D5 */ -#define HUB_CHAR_PORTIND 0x0080 /* D7 */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ struct usb_hub_status { __le16 wHubStatus; @@ -198,6 +206,17 @@ struct usb_hub_status { #define USB_DT_HUB_NONVAR_SIZE 7 #define USB_DT_SS_HUB_SIZE 12 +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + struct usb_hub_descriptor { __u8 bDescLength; __u8 bDescriptorType; diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d5da6c68c25..61b29057b05 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -605,8 +605,26 @@ struct usb_ss_ep_comp_descriptor { } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 + /* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -#define USB_SS_MAX_STREAMS(p) (1 << ((p) & 0x1f)) +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + /* Bits 1:0 of bmAttributes if this is an isoc endpoint */ #define USB_SS_MULT(p) (1 + ((p) & 0x3)) diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 1d3a67523ff..da653b5c713 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/scatterlist.h> #include <linux/types.h> #include <linux/usb/ch9.h> @@ -32,6 +33,9 @@ struct usb_ep; * @dma: DMA address corresponding to 'buf'. If you don't set this * field, and the usb controller needs one, it is responsible * for mapping and unmapping the buffer. + * @sg: a scatterlist for SG-capable controllers. + * @num_sgs: number of SG entries + * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used * @no_interrupt: If true, hints that no completion irq is needed. @@ -88,6 +92,10 @@ struct usb_request { unsigned length; dma_addr_t dma; + struct scatterlist *sg; + unsigned num_sgs; + unsigned num_mapped_sgs; + unsigned stream_id:16; unsigned no_interrupt:1; unsigned zero:1; @@ -164,7 +172,7 @@ struct usb_ep { unsigned maxpacket:16; unsigned max_streams:16; unsigned mult:2; - unsigned maxburst:4; + unsigned maxburst:5; u8 address; const struct usb_endpoint_descriptor *desc; const struct usb_ss_ep_comp_descriptor *comp_desc; @@ -477,8 +485,9 @@ struct usb_gadget_ops { * driver setup() requests * @ep_list: List of other endpoints supported by the device. * @speed: Speed of current connection to USB host. - * @is_dualspeed: True if the controller supports both high and full speed - * operation. If it does, the gadget driver must also support both. + * @max_speed: Maximal speed the UDC can handle. UDC must support this + * and all slower speeds. + * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable @@ -518,7 +527,8 @@ struct usb_gadget { struct usb_ep *ep0; struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; - unsigned is_dualspeed:1; + enum usb_device_speed max_speed; + unsigned sg_supported:1; unsigned is_otg:1; unsigned is_a_peripheral:1; unsigned b_hnp_enable:1; @@ -549,7 +559,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) static inline int gadget_is_dualspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_DUALSPEED - /* runtime test would check "g->is_dualspeed" ... that might be + /* runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -567,7 +577,7 @@ static inline int gadget_is_superspeed(struct usb_gadget *g) { #ifdef CONFIG_USB_GADGET_SUPERSPEED /* - * runtime test would check "g->is_superspeed" ... that might be + * runtime test would check "g->max_speed" ... that might be * useful to work around hardware bugs, but is mostly pointless */ return 1; @@ -760,7 +770,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) /** * struct usb_gadget_driver - driver for usb 'slave' devices * @function: String describing the gadget's function - * @speed: Highest speed the driver handles. + * @max_speed: Highest speed the driver handles. * @setup: Invoked for ep0 control requests that aren't handled by * the hardware level driver. Most calls must be handled by * the gadget driver, including descriptor and configuration @@ -824,7 +834,7 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) */ struct usb_gadget_driver { char *function; - enum usb_device_speed speed; + enum usb_device_speed max_speed; void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 03354d557b7..b2f62f3a32a 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -99,7 +99,6 @@ struct usb_hcd { */ unsigned long flags; #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ -#define HCD_FLAG_SAW_IRQ 1 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ @@ -110,7 +109,6 @@ struct usb_hcd { * be slightly faster than test_bit(). */ #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) -#define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ)) #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index e5a40c31854..0d3f9887925 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -67,6 +67,14 @@ struct renesas_usbhs_platform_callback { /* * option: * + * for board specific clock control + */ + void (*power_ctrl)(struct platform_device *pdev, + void __iomem *base, int enable); + + /* + * option: + * * Phy reset for platform */ void (*phy_reset)(struct platform_device *pdev); @@ -118,7 +126,7 @@ struct renesas_usbhs_driver_param { * * delay time from notify_hotplug callback */ - int detection_delay; + int detection_delay; /* msec */ /* * option: diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b29f70b2eca..4267a9c717b 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -58,11 +58,13 @@ enum port_dev_state { * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. + * @bulk_in_buffers: pointers to the bulk in buffers for this port + * @read_urbs: pointers to the bulk in urbs for this port + * @read_urbs_free: status bitmap the for bulk in urbs * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. * @write_fifo: kfifo used to buffer outgoing data - * @write_urb_busy: port`s writing status * @bulk_out_buffers: pointers to the bulk out buffers for this port * @write_urbs: pointers to the bulk out urbs for this port * @write_urbs_free: status bitmap the for bulk out urbs @@ -99,11 +101,14 @@ struct usb_serial_port { struct urb *read_urb; __u8 bulk_in_endpointAddress; + unsigned char *bulk_in_buffers[2]; + struct urb *read_urbs[2]; + unsigned long read_urbs_free; + unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; struct kfifo write_fifo; - int write_urb_busy; unsigned char *bulk_out_buffers[2]; struct urb *write_urbs[2]; @@ -340,7 +345,7 @@ extern void usb_serial_generic_disconnect(struct usb_serial *serial); extern void usb_serial_generic_release(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); -extern int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, +extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); extern void usb_serial_generic_process_read_urb(struct urb *urb); extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h new file mode 100644 index 00000000000..9929b05cff3 --- /dev/null +++ b/include/media/davinci/vpif_types.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2011 Texas Instruments Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _VPIF_TYPES_H +#define _VPIF_TYPES_H + +#define VPIF_CAPTURE_MAX_CHANNELS 2 + +enum vpif_if_type { + VPIF_IF_BT656, + VPIF_IF_BT1120, + VPIF_IF_RAW_BAYER +}; + +struct vpif_interface { + enum vpif_if_type if_type; + unsigned hd_pol:1; + unsigned vd_pol:1; + unsigned fid_pol:1; +}; + +struct vpif_subdev_info { + const char *name; + struct i2c_board_info board_info; + u32 input; + u32 output; + unsigned can_route:1; + struct vpif_interface vpif_if; +}; + +struct vpif_display_config { + int (*set_clock)(int, int); + struct vpif_subdev_info *subdevinfo; + int subdev_count; + const char **output; + int output_count; + const char *card_name; +}; + +struct vpif_input { + struct v4l2_input input; + const char *subdev_name; +}; + +struct vpif_capture_chan_config { + const struct vpif_input *inputs; + int input_count; +}; + +struct vpif_capture_config { + int (*setup_input_channel_mode)(int); + int (*setup_input_path)(int, const char *); + struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS]; + struct vpif_subdev_info *subdev_info; + int subdev_count; + const char *card_name; +}; +#endif /* _VPIF_TYPES_H */ diff --git a/include/net/snmp.h b/include/net/snmp.h index 2f65e1686fc..0147b901e79 100644 --- a/include/net/snmp.h +++ b/include/net/snmp.h @@ -129,33 +129,33 @@ struct linux_xfrm_mib { __this_cpu_inc(mib[0]->mibs[field]) #define SNMP_INC_STATS_USER(mib, field) \ - irqsafe_cpu_inc(mib[0]->mibs[field]) + this_cpu_inc(mib[0]->mibs[field]) #define SNMP_INC_STATS_ATOMIC_LONG(mib, field) \ atomic_long_inc(&mib->mibs[field]) #define SNMP_INC_STATS(mib, field) \ - irqsafe_cpu_inc(mib[0]->mibs[field]) + this_cpu_inc(mib[0]->mibs[field]) #define SNMP_DEC_STATS(mib, field) \ - irqsafe_cpu_dec(mib[0]->mibs[field]) + this_cpu_dec(mib[0]->mibs[field]) #define SNMP_ADD_STATS_BH(mib, field, addend) \ __this_cpu_add(mib[0]->mibs[field], addend) #define SNMP_ADD_STATS_USER(mib, field, addend) \ - irqsafe_cpu_add(mib[0]->mibs[field], addend) + this_cpu_add(mib[0]->mibs[field], addend) #define SNMP_ADD_STATS(mib, field, addend) \ - irqsafe_cpu_add(mib[0]->mibs[field], addend) + this_cpu_add(mib[0]->mibs[field], addend) /* * Use "__typeof__(*mib[0]) *ptr" instead of "__typeof__(mib[0]) ptr" * to make @ptr a non-percpu pointer. */ #define SNMP_UPD_PO_STATS(mib, basefield, addend) \ do { \ - irqsafe_cpu_inc(mib[0]->mibs[basefield##PKTS]); \ - irqsafe_cpu_add(mib[0]->mibs[basefield##OCTETS], addend); \ + this_cpu_inc(mib[0]->mibs[basefield##PKTS]); \ + this_cpu_add(mib[0]->mibs[basefield##OCTETS], addend); \ } while (0) #define SNMP_UPD_PO_STATS_BH(mib, basefield, addend) \ do { \ diff --git a/include/sound/saif.h b/include/sound/saif.h index d0e0de7984e..f22f3e16edf 100644 --- a/include/sound/saif.h +++ b/include/sound/saif.h @@ -10,7 +10,7 @@ #define __SOUND_SAIF_H__ struct mxs_saif_platform_data { - int (*init) (void); - int (*get_master_id) (unsigned int saif_id); + bool master_mode; /* if true use master mode */ + int master_id; /* id of the master if in slave mode */ }; #endif |