diff options
Diffstat (limited to 'include')
191 files changed, 2699 insertions, 3582 deletions
diff --git a/include/asm-alpha/barrier.h b/include/asm-alpha/barrier.h index 384dc08d6f5..ac78eba909b 100644 --- a/include/asm-alpha/barrier.h +++ b/include/asm-alpha/barrier.h @@ -24,7 +24,7 @@ __asm__ __volatile__("mb": : :"memory") #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#define smp_read_barrier_depends() barrier() +#define smp_read_barrier_depends() do { } while (0) #endif #define set_mb(var, value) \ diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h index 05ce5fba43e..3f0c59f6d8a 100644 --- a/include/asm-alpha/pgtable.h +++ b/include/asm-alpha/pgtable.h @@ -287,17 +287,34 @@ extern inline pte_t pte_mkspecial(pte_t pte) { return pte; } #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) #define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) +/* + * The smp_read_barrier_depends() in the following functions are required to + * order the load of *dir (the pointer in the top level page table) with any + * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir). + * + * If this ordering is not enforced, the CPU might load an older value of + * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for + * more details. + * + * Note that we never change the mm->pgd pointer after the task is running, so + * pgd_offset does not require such a barrier. + */ + /* Find an entry in the second-level page table.. */ extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) { - return (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1)); + pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1)); + smp_read_barrier_depends(); /* see above */ + return ret; } /* Find an entry in the third-level page table.. */ extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address) { - return (pte_t *) pmd_page_vaddr(*dir) + pte_t *ret = (pte_t *) pmd_page_vaddr(*dir) + ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1)); + smp_read_barrier_depends(); /* see above */ + return ret; } #define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr)) diff --git a/include/asm-alpha/types.h b/include/asm-alpha/types.h index f5716139ec8..c1541353cce 100644 --- a/include/asm-alpha/types.h +++ b/include/asm-alpha/types.h @@ -8,28 +8,12 @@ * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-l64.h> #ifndef __ASSEMBLY__ typedef unsigned int umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -typedef __signed__ long __s64; -typedef unsigned long __u64; - #endif /* __ASSEMBLY__ */ /* @@ -41,18 +25,6 @@ typedef unsigned long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long s64; -typedef unsigned long u64; - typedef u64 dma_addr_t; typedef u64 dma64_addr_t; diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h index 9d9f4b54b2c..261e5bc958d 100644 --- a/include/asm-arm/arch-pxa/pm.h +++ b/include/asm-arm/arch-pxa/pm.h @@ -10,7 +10,7 @@ #include <linux/suspend.h> struct pxa_cpu_pm_fns { - int save_size; + int save_count; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index a758a719180..9aa6c2e939e 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -22,7 +22,8 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + if (cpu_is_pxa2xx()) + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; if (mode == 's') { /* Jump into ROM at address 0 */ diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h index 0b5f881c3d8..5001390be95 100644 --- a/include/asm-arm/div64.h +++ b/include/asm-arm/div64.h @@ -224,6 +224,4 @@ #endif -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); - #endif diff --git a/include/asm-arm/types.h b/include/asm-arm/types.h index 3141451a9bd..345df01534a 100644 --- a/include/asm-arm/types.h +++ b/include/asm-arm/types.h @@ -1,29 +1,12 @@ #ifndef __ASM_ARM_TYPES_H #define __ASM_ARM_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -35,18 +18,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-avr32/types.h b/include/asm-avr32/types.h index 8999a381940..9cefda6f534 100644 --- a/include/asm-avr32/types.h +++ b/include/asm-avr32/types.h @@ -8,28 +8,12 @@ #ifndef __ASM_AVR32_TYPES_H #define __ASM_AVR32_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -41,18 +25,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h index 686cf83a526..7f34cd384f1 100644 --- a/include/asm-blackfin/dpmc.h +++ b/include/asm-blackfin/dpmc.h @@ -1,7 +1,7 @@ /* * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power * Management Controller Driver. - * Copyright (C) 2004 Analog Device Inc. + * Copyright (C) 2004-2008 Analog Device Inc. * */ #ifndef _BLACKFIN_DPMC_H_ @@ -65,6 +65,14 @@ void disable_wdog_timer(void); extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); +struct bfin_dpmc_platform_data { + const unsigned int *tuple_tab; + unsigned short tabsize; + unsigned short vr_settling_time; /* in us */ +}; + +#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16)) + #endif /* __KERNEL__ */ #endif /*_BLACKFIN_DPMC_H_*/ diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index 562c6d3a323..c4f721e0d00 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -17,6 +17,11 @@ #define PF_DTRACE_OFF 1 #define PF_DTRACE_BIT 5 +/* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + /* This one is used for exceptions, emulation, and NMI. It doesn't push RETI and doesn't do cli. */ #define SAVE_ALL_SYS save_context_no_interrupts diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index f0ab2736a68..26e3c8076b4 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) #define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) #define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) #define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) #define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index fbe88dee3e2..d016603b661 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index 17e1548cec0..0ab4dd7494c 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -468,6 +468,8 @@ #define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ #define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ #define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h index 832e6f6122d..5aa38e5da6b 100644 --- a/include/asm-blackfin/mach-bf533/irq.h +++ b/include/asm-blackfin/mach-bf533/irq.h @@ -66,12 +66,13 @@ Core Emulation ** DMA8/9 Interrupt IVG13 28 DMA10/11 Interrupt IVG13 29 Watchdog Timer IVG13 30 - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- + + Softirq IVG14 31 + System Call -- (lowest priority) IVG15 32 * */ -#define SYS_IRQS 32 -#define NR_PERI_INTS 24 +#define SYS_IRQS 31 +#define NR_PERI_INTS 24 /* The ABSTRACT IRQ definitions */ /** the first seven of the following are fixed, the rest you change if you need to **/ @@ -96,7 +97,7 @@ Core Emulation ** #define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ #define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ #define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ -#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ +#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ #define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ #define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ #define IRQ_TMR0 23 /*Timer 0 */ @@ -108,9 +109,6 @@ Core Emulation ** #define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ #define IRQ_WATCH 30 /*Watch Dog Timer */ -#define IRQ_SW_INT1 31 /*Software Int 1 */ -#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */ - #define IRQ_PF0 33 #define IRQ_PF1 34 #define IRQ_PF2 35 diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index fd100a415b9..f79d1a0e912 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h index be6f2ff77f3..2e68a8a1e73 100644 --- a/include/asm-blackfin/mach-bf537/irq.h +++ b/include/asm-blackfin/mach-bf537/irq.h @@ -34,24 +34,23 @@ /* * Interrupt source definitions - Event Source Core Event Name -Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - -..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * + * Event Source Core Event Name + * Core Emulation ** + * Events (highest priority) EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * ..... + * + * Softirq IVG14 + * System Call -- + * (lowest priority) IVG15 */ -#define SYS_IRQS 41 +#define SYS_IRQS 39 #define NR_PERI_INTS 32 /* The ABSTRACT IRQ definitions */ @@ -95,10 +94,8 @@ Core Emulation ** #define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ #define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ #define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */ -#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ +#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ #define IRQ_WATCH 38 /*Watch Dog Timer */ -#define IRQ_SW_INT1 40 /*Software Int 1 */ -#define IRQ_SW_INT2 41 /*Software Int 2 (reserved for SYSCALL) */ #define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */ #define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */ diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 6547027cd3e..5eb46a77d91 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -54,6 +54,9 @@ #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) +#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 08f90c21fe8..e022e896cb1 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -2329,6 +2329,26 @@ #define KPADWE 0x1000 /* Keypad Wake-Up Enable */ #define ROTWE 0x2000 /* Rotary Wake-Up Enable */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + /* Bit masks for NFC_CTL */ #define WR_DLY 0xf /* Write Strobe Delay */ diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 8a4e66d1db3..7a962876929 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -44,10 +44,15 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) +#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index 366c9b9a0cb..1ab50e906fe 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -868,6 +868,34 @@ #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5*/ +#define GAIN_10 0x0004 /* GAIN = 1*/ +#define GAIN_20 0x0008 /* GAIN = 2*/ +#define GAIN_50 0x000C /* GAIN = 5*/ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + /* PLL_DIV Masks */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h index 83f0383957d..6698389c556 100644 --- a/include/asm-blackfin/mach-bf561/irq.h +++ b/include/asm-blackfin/mach-bf561/irq.h @@ -118,12 +118,13 @@ Supplemental interrupt 0 IVG7 69 supplemental interrupt 1 IVG7 70 - Software Interrupt 1 IVG14 71 - Software Interrupt 2 IVG15 72 * - (lowest priority) + Softirq IVG14 + System Call -- + (lowest priority) IVG15 + **********************************************************************/ -#define SYS_IRQS 72 +#define SYS_IRQS 71 #define NR_PERI_INTS 64 /* @@ -237,9 +238,7 @@ #define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */ #define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */ #define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */ -#define IRQ_SW_INT1 71 /* Software Interrupt 1 */ -#define IRQ_SW_INT2 72 /* Software Interrupt 2 */ - /* reserved for SYSCALL */ + #define IRQ_PF0 73 #define IRQ_PF1 74 #define IRQ_PF2 75 diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S index fd0ebe1862b..c0e630edfb9 100644 --- a/include/asm-blackfin/mach-common/context.S +++ b/include/asm-blackfin/mach-common/context.S @@ -28,6 +28,11 @@ */ /* + * NOTE! The single-stepping code assumes that all interrupt handlers + * start by saving SYSCFG on the stack with their first instruction. + */ + +/* * Code to save processor context. * We even save the register which are preserved by a function call * - r4, r5, r6, r7, p3, p4, p5 diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h index 6e5859b6ea3..ddc43ce3853 100644 --- a/include/asm-blackfin/time.h +++ b/include/asm-blackfin/time.h @@ -24,6 +24,8 @@ #ifndef CONFIG_CPU_FREQ #define TIME_SCALE 1 +#define __bfin_cycles_off (0) +#define __bfin_cycles_mod (0) #else /* * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 . @@ -31,6 +33,8 @@ * adjust the Core Timer Presale Register. This way we don't lose time. */ #define TIME_SCALE 4 +extern unsigned long long __bfin_cycles_off; +extern unsigned int __bfin_cycles_mod; #endif #endif diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h index 9785a6d531c..8441cbc2bf9 100644 --- a/include/asm-blackfin/types.h +++ b/include/asm-blackfin/types.h @@ -8,30 +8,12 @@ * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -/* HK0617 -- Changes to unsigned long temporarily */ -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* * These aren't exported outside the kernel to avoid name space clashes @@ -42,18 +24,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-cris/types.h b/include/asm-cris/types.h index 5a21c42bc6c..5790262cbe8 100644 --- a/include/asm-cris/types.h +++ b/include/asm-cris/types.h @@ -1,29 +1,12 @@ #ifndef _ETRAX_TYPES_H #define _ETRAX_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -35,18 +18,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide, just like our other addresses. */ typedef u32 dma_addr_t; diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h index cb307f8a6b4..d3a12a9079f 100644 --- a/include/asm-frv/system.h +++ b/include/asm-frv/system.h @@ -179,7 +179,7 @@ do { \ #define mb() asm volatile ("membar" : : :"memory") #define rmb() asm volatile ("membar" : : :"memory") #define wmb() asm volatile ("membar" : : :"memory") -#define read_barrier_depends() barrier() +#define read_barrier_depends() do { } while (0) #ifdef CONFIG_SMP #define smp_mb() mb() diff --git a/include/asm-frv/types.h b/include/asm-frv/types.h index 767e5ed71c4..613bf1e962f 100644 --- a/include/asm-frv/types.h +++ b/include/asm-frv/types.h @@ -12,29 +12,12 @@ #ifndef _ASM_TYPES_H #define _ASM_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -46,19 +29,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-frv/unaligned.h b/include/asm-frv/unaligned.h index 64ccc736f2d..839a2fbffa0 100644 --- a/include/asm-frv/unaligned.h +++ b/include/asm-frv/unaligned.h @@ -9,8 +9,8 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _ASM_FRV_UNALIGNED_H -#define _ASM_FRV_UNALIGNED_H +#ifndef _ASM_UNALIGNED_H +#define _ASM_UNALIGNED_H #include <linux/unaligned/le_byteshift.h> #include <linux/unaligned/be_byteshift.h> @@ -19,4 +19,4 @@ #define get_unaligned __get_unaligned_be #define put_unaligned __put_unaligned_be -#endif /* _ASM_FRV_UNALIGNED_H */ +#endif /* _ASM_UNALIGNED_H */ diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild index c18110ee30f..4c9932a2503 100644 --- a/include/asm-generic/Kbuild +++ b/include/asm-generic/Kbuild @@ -7,5 +7,7 @@ header-y += poll.h header-y += signal.h header-y += statfs.h +unifdef-y += int-l64.h +unifdef-y += int-ll64.h unifdef-y += resource.h unifdef-y += siginfo.h diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h index a4a49370793..8f4e3193342 100644 --- a/include/asm-generic/div64.h +++ b/include/asm-generic/div64.h @@ -30,11 +30,6 @@ __rem; \ }) -static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor) -{ - return dividend / divisor; -} - #elif BITS_PER_LONG == 32 extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); @@ -54,8 +49,6 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); __rem; \ }) -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); - #else /* BITS_PER_LONG == ?? */ # error do_div() does not yet support the C64 diff --git a/include/asm-generic/int-l64.h b/include/asm-generic/int-l64.h new file mode 100644 index 00000000000..2af9b75d77d --- /dev/null +++ b/include/asm-generic/int-l64.h @@ -0,0 +1,71 @@ +/* + * asm-generic/int-l64.h + * + * Integer declarations for architectures which use "long" + * for 64-bit types. + */ + +#ifndef _ASM_GENERIC_INT_L64_H +#define _ASM_GENERIC_INT_L64_H + +#ifndef __ASSEMBLY__ +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +typedef __signed__ long __s64; +typedef unsigned long __u64; + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long s64; +typedef unsigned long u64; + +#define S8_C(x) x +#define U8_C(x) x ## U +#define S16_C(x) x +#define U16_C(x) x ## U +#define S32_C(x) x +#define U32_C(x) x ## U +#define S64_C(x) x ## L +#define U64_C(x) x ## UL + +#else /* __ASSEMBLY__ */ + +#define S8_C(x) x +#define U8_C(x) x +#define S16_C(x) x +#define U16_C(x) x +#define S32_C(x) x +#define U32_C(x) x +#define S64_C(x) x +#define U64_C(x) x + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_GENERIC_INT_L64_H */ diff --git a/include/asm-generic/int-ll64.h b/include/asm-generic/int-ll64.h new file mode 100644 index 00000000000..260948905e4 --- /dev/null +++ b/include/asm-generic/int-ll64.h @@ -0,0 +1,76 @@ +/* + * asm-generic/int-ll64.h + * + * Integer declarations for architectures which use "long long" + * for 64-bit types. + */ + +#ifndef _ASM_GENERIC_INT_LL64_H +#define _ASM_GENERIC_INT_LL64_H + +#ifndef __ASSEMBLY__ +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#ifdef __GNUC__ +__extension__ typedef __signed__ long long __s64; +__extension__ typedef unsigned long long __u64; +#elif defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define S8_C(x) x +#define U8_C(x) x ## U +#define S16_C(x) x +#define U16_C(x) x ## U +#define S32_C(x) x +#define U32_C(x) x ## U +#define S64_C(x) x ## LL +#define U64_C(x) x ## ULL + +#else /* __ASSEMBLY__ */ + +#define S8_C(x) x +#define U8_C(x) x +#define S16_C(x) x +#define U16_C(x) x +#define S32_C(x) x +#define U32_C(x) x +#define S64_C(x) x +#define U64_C(x) x + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_GENERIC_INT_LL64_H */ diff --git a/include/asm-h8300/types.h b/include/asm-h8300/types.h index 56566e2a09f..12875190b15 100644 --- a/include/asm-h8300/types.h +++ b/include/asm-h8300/types.h @@ -1,6 +1,8 @@ #ifndef _H8300_TYPES_H #define _H8300_TYPES_H +#include <asm-generic/int-ll64.h> + #if !defined(__ASSEMBLY__) /* @@ -14,41 +16,10 @@ typedef unsigned short umode_t; /* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - -/* * These aren't exported outside the kernel to avoid name space clashes */ #ifdef __KERNEL__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - #define BITS_PER_LONG 32 /* Dma addresses are 32-bits wide. */ diff --git a/include/asm-ia64/cpu.h b/include/asm-ia64/cpu.h index e87fa3210a2..fcca30b9f11 100644 --- a/include/asm-ia64/cpu.h +++ b/include/asm-ia64/cpu.h @@ -14,8 +14,8 @@ DECLARE_PER_CPU(struct ia64_cpu, cpu_devices); DECLARE_PER_CPU(int, cpu_state); -extern int arch_register_cpu(int num); #ifdef CONFIG_HOTPLUG_CPU +extern int arch_register_cpu(int num); extern void arch_unregister_cpu(int); #endif diff --git a/include/asm-ia64/dmi.h b/include/asm-ia64/dmi.h index f3efaa22952..00eb1b130b6 100644 --- a/include/asm-ia64/dmi.h +++ b/include/asm-ia64/dmi.h @@ -3,4 +3,9 @@ #include <asm/io.h> +/* Use normal IO mappings for DMI */ +#define dmi_ioremap ioremap +#define dmi_iounmap(x,l) iounmap(x) +#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC) + #endif diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h index 4ebed77aa47..260a85ac9d6 100644 --- a/include/asm-ia64/io.h +++ b/include/asm-ia64/io.h @@ -423,11 +423,6 @@ extern void __iomem * ioremap(unsigned long offset, unsigned long size); extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size); extern void iounmap (volatile void __iomem *addr); -/* Use normal IO mappings for DMI */ -#define dmi_ioremap ioremap -#define dmi_iounmap(x,l) iounmap(x) -#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC) - /* * String version of IO memory access ops: */ diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h index f30e0558386..2422ac61658 100644 --- a/include/asm-ia64/thread_info.h +++ b/include/asm-ia64/thread_info.h @@ -108,13 +108,11 @@ extern void tsk_clear_notify_resume(struct task_struct *tsk); #define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ #define TIF_FREEZE 20 /* is freezing for suspend */ #define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */ -#define TIF_RESTORE_SIGMASK 22 /* restore signal mask in do_signal() */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) @@ -131,7 +129,18 @@ extern void tsk_clear_notify_resume(struct task_struct *tsk); #define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)) #define TS_POLLING 1 /* true if in idle loop and not sleeping */ +#define TS_RESTORE_SIGMASK 2 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + #endif /* _ASM_IA64_THREAD_INFO_H */ diff --git a/include/asm-ia64/types.h b/include/asm-ia64/types.h index 902850d1242..e36b3716e71 100644 --- a/include/asm-ia64/types.h +++ b/include/asm-ia64/types.h @@ -13,6 +13,8 @@ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co */ +#include <asm-generic/int-l64.h> + #ifdef __ASSEMBLY__ # define __IA64_UL(x) (x) # define __IA64_UL_CONST(x) x @@ -28,39 +30,10 @@ typedef unsigned int umode_t; /* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -typedef __signed__ long __s64; -typedef unsigned long __u64; - -/* * These aren't exported outside the kernel to avoid name space clashes */ # ifdef __KERNEL__ -typedef __s8 s8; -typedef __u8 u8; - -typedef __s16 s16; -typedef __u16 u16; - -typedef __s32 s32; -typedef __u32 u32; - -typedef __s64 s64; -typedef __u64 u64; - #define BITS_PER_LONG 64 /* DMA addresses are 64-bits wide, in general. */ diff --git a/include/asm-m32r/types.h b/include/asm-m32r/types.h index b64c16639a7..bc9f7fff0ac 100644 --- a/include/asm-m32r/types.h +++ b/include/asm-m32r/types.h @@ -1,28 +1,12 @@ #ifndef _ASM_M32R_TYPES_H #define _ASM_M32R_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif #endif /* __ASSEMBLY__ */ /* @@ -34,18 +18,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* DMA addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-m68k/div64.h b/include/asm-m68k/div64.h index 33caad1628d..8243c931b5c 100644 --- a/include/asm-m68k/div64.h +++ b/include/asm-m68k/div64.h @@ -25,5 +25,4 @@ __rem; \ }) -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); #endif /* _M68K_DIV64_H */ diff --git a/include/asm-m68k/machw.h b/include/asm-m68k/machw.h index d2e0e25d5c9..35624998291 100644 --- a/include/asm-m68k/machw.h +++ b/include/asm-m68k/machw.h @@ -66,36 +66,6 @@ struct MAC_SCC # define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS)) #endif -/* hardware stuff */ - -#define MACHW_DECLARE(name) unsigned name : 1 -#define MACHW_SET(name) (mac_hw_present.name = 1) -#define MACHW_PRESENT(name) (mac_hw_present.name) - -struct mac_hw_present { - /* video hardware */ - /* sound hardware */ - /* disk storage interfaces */ - MACHW_DECLARE(MAC_SCSI_80); /* Directly mapped NCR5380 */ - MACHW_DECLARE(MAC_SCSI_96); /* 53c9[46] */ - MACHW_DECLARE(MAC_SCSI_96_2); /* 2nd 53c9[46] Q900 and Q950 */ - MACHW_DECLARE(IDE); /* IDE Interface */ - /* other I/O hardware */ - MACHW_DECLARE(SCC); /* Serial Communications Contr. */ - /* DMA */ - MACHW_DECLARE(SCSI_DMA); /* DMA for the NCR5380 */ - /* real time clocks */ - MACHW_DECLARE(RTC_CLK); /* clock chip */ - /* supporting hardware */ - MACHW_DECLARE(VIA1); /* Versatile Interface Ad. 1 */ - MACHW_DECLARE(VIA2); /* Versatile Interface Ad. 2 */ - MACHW_DECLARE(RBV); /* Versatile Interface Ad. 2+ */ - /* NUBUS */ - MACHW_DECLARE(NUBUS); /* NUBUS */ -}; - -extern struct mac_hw_present mac_hw_present; - #endif /* __ASSEMBLY__ */ #endif /* linux/machw.h */ diff --git a/include/asm-m68k/types.h b/include/asm-m68k/types.h index c35c09d93b6..6441cb5f8e7 100644 --- a/include/asm-m68k/types.h +++ b/include/asm-m68k/types.h @@ -8,30 +8,12 @@ * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-ll64.h> #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -43,18 +25,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* DMA addresses are always 32-bits wide */ typedef u32 dma_addr_t; diff --git a/include/asm-m68knommu/dma.h b/include/asm-m68knommu/dma.h index 3f20419c633..939a0205621 100644 --- a/include/asm-m68knommu/dma.h +++ b/include/asm-m68knommu/dma.h @@ -35,7 +35,8 @@ /* * Set number of channels of DMA on ColdFire for different implementations. */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) +#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ + defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #define MAX_M68K_DMA_CHANNELS 4 #elif defined(CONFIG_M5272) #define MAX_M68K_DMA_CHANNELS 1 diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h index 96c45101832..6044397adb6 100644 --- a/include/asm-m68knommu/param.h +++ b/include/asm-m68knommu/param.h @@ -1,13 +1,16 @@ #ifndef _M68KNOMMU_PARAM_H #define _M68KNOMMU_PARAM_H -#define HZ CONFIG_HZ - #ifdef __KERNEL__ +#define HZ CONFIG_HZ #define USER_HZ HZ #define CLOCKS_PER_SEC (USER_HZ) #endif +#ifndef HZ +#define HZ 100 +#endif + #define EXEC_PAGESIZE 4096 #ifndef NOGROUP diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index c2bd126c3b4..642724734eb 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -558,11 +558,13 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long * __clear_bit(nr, addr); } +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + /* * Return the bit position (0..63) of the most significant 1 bit in a word * Returns -1 if no 1 bit exists */ -static inline int __ilog2(unsigned long x) +static inline unsigned long __fls(unsigned long x) { int lz; @@ -591,13 +593,6 @@ static inline int __ilog2(unsigned long x) return 63 - lz; } -static inline unsigned long __fls(unsigned long x) -{ - return __ilog2(x); -} - -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - /* * __ffs - find first bit in word. * @word: The word to search @@ -607,7 +602,7 @@ static inline unsigned long __fls(unsigned long x) */ static inline unsigned long __ffs(unsigned long word) { - return __ilog2(word & -word); + return __fls(word & -word); } /* @@ -654,6 +649,7 @@ static inline int ffs(int word) #else #include <asm-generic/bitops/__ffs.h> +#include <asm-generic/bitops/__fls.h> #include <asm-generic/bitops/ffs.h> #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/fls64.h> diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h index aa6b876bbd7..71f5c5cfc58 100644 --- a/include/asm-mips/compiler.h +++ b/include/asm-mips/compiler.h @@ -9,10 +9,10 @@ #define _ASM_COMPILER_H #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) -#define GCC_IMM_ASM "n" +#define GCC_IMM_ASM() "n" #define GCC_REG_ACCUM "$0" #else -#define GCC_IMM_ASM "rn" +#define GCC_IMM_ASM() "rn" #define GCC_REG_ACCUM "accum" #endif diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h index 716371bd098..d1d699105c1 100644 --- a/include/asm-mips/div64.h +++ b/include/asm-mips/div64.h @@ -82,7 +82,6 @@ (n) = __quot; \ __mod; }) -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); #endif /* (_MIPS_SZLONG == 32) */ #if (_MIPS_SZLONG == 64) @@ -106,11 +105,6 @@ extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); (n) = __quot; \ __mod; }) -static inline uint64_t div64_64(uint64_t dividend, uint64_t divisor) -{ - return dividend / divisor; -} - #endif /* (_MIPS_SZLONG == 64) */ #endif /* _ASM_DIV64_H */ diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index a05555165d0..363a14ee0ae 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -40,8 +40,8 @@ #include <linux/delay.h> #include <linux/types.h> -#include <asm/io.h> -#include <asm/irq.h> +#include <linux/io.h> +#include <linux/irq.h> /* cpu pipeline flush */ void static inline au_sync(void) @@ -63,32 +63,32 @@ void static inline au_sync_delay(int ms) void static inline au_writeb(u8 val, unsigned long reg) { - *(volatile u8 *)(reg) = val; + *(volatile u8 *)reg = val; } void static inline au_writew(u16 val, unsigned long reg) { - *(volatile u16 *)(reg) = val; + *(volatile u16 *)reg = val; } void static inline au_writel(u32 val, unsigned long reg) { - *(volatile u32 *)(reg) = val; + *(volatile u32 *)reg = val; } static inline u8 au_readb(unsigned long reg) { - return (*(volatile u8 *)reg); + return *(volatile u8 *)reg; } static inline u16 au_readw(unsigned long reg) { - return (*(volatile u16 *)reg); + return *(volatile u16 *)reg; } static inline u32 au_readl(unsigned long reg) { - return (*(volatile u32 *)reg); + return *(volatile u32 *)reg; } @@ -117,76 +117,77 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #endif /* !defined (_LANGUAGE_ASSEMBLY) */ /* - * SDRAM Register Offsets + * SDRAM register offsets */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 (0x0000) -#define MEM_SDMODE1 (0x0004) -#define MEM_SDMODE2 (0x0008) -#define MEM_SDADDR0 (0x000C) -#define MEM_SDADDR1 (0x0010) -#define MEM_SDADDR2 (0x0014) -#define MEM_SDREFCFG (0x0018) -#define MEM_SDPRECMD (0x001C) -#define MEM_SDAUTOREF (0x0020) -#define MEM_SDWRMD0 (0x0024) -#define MEM_SDWRMD1 (0x0028) -#define MEM_SDWRMD2 (0x002C) -#define MEM_SDSLEEP (0x0030) -#define MEM_SDSMCKE (0x0034) +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \ + defined(CONFIG_SOC_AU1100) +#define MEM_SDMODE0 0x0000 +#define MEM_SDMODE1 0x0004 +#define MEM_SDMODE2 0x0008 +#define MEM_SDADDR0 0x000C +#define MEM_SDADDR1 0x0010 +#define MEM_SDADDR2 0x0014 +#define MEM_SDREFCFG 0x0018 +#define MEM_SDPRECMD 0x001C +#define MEM_SDAUTOREF 0x0020 +#define MEM_SDWRMD0 0x0024 +#define MEM_SDWRMD1 0x0028 +#define MEM_SDWRMD2 0x002C +#define MEM_SDSLEEP 0x0030 +#define MEM_SDSMCKE 0x0034 /* * MEM_SDMODE register content definitions */ -#define MEM_SDMODE_F (1<<22) -#define MEM_SDMODE_SR (1<<21) -#define MEM_SDMODE_BS (1<<20) -#define MEM_SDMODE_RS (3<<18) -#define MEM_SDMODE_CS (7<<15) -#define MEM_SDMODE_TRAS (15<<11) -#define MEM_SDMODE_TMRD (3<<9) -#define MEM_SDMODE_TWR (3<<7) -#define MEM_SDMODE_TRP (3<<5) -#define MEM_SDMODE_TRCD (3<<3) -#define MEM_SDMODE_TCL (7<<0) - -#define MEM_SDMODE_BS_2Bank (0<<20) -#define MEM_SDMODE_BS_4Bank (1<<20) -#define MEM_SDMODE_RS_11Row (0<<18) -#define MEM_SDMODE_RS_12Row (1<<18) -#define MEM_SDMODE_RS_13Row (2<<18) -#define MEM_SDMODE_RS_N(N) ((N)<<18) -#define MEM_SDMODE_CS_7Col (0<<15) -#define MEM_SDMODE_CS_8Col (1<<15) -#define MEM_SDMODE_CS_9Col (2<<15) -#define MEM_SDMODE_CS_10Col (3<<15) -#define MEM_SDMODE_CS_11Col (4<<15) -#define MEM_SDMODE_CS_N(N) ((N)<<15) -#define MEM_SDMODE_TRAS_N(N) ((N)<<11) -#define MEM_SDMODE_TMRD_N(N) ((N)<<9) -#define MEM_SDMODE_TWR_N(N) ((N)<<7) -#define MEM_SDMODE_TRP_N(N) ((N)<<5) -#define MEM_SDMODE_TRCD_N(N) ((N)<<3) -#define MEM_SDMODE_TCL_N(N) ((N)<<0) +#define MEM_SDMODE_F (1 << 22) +#define MEM_SDMODE_SR (1 << 21) +#define MEM_SDMODE_BS (1 << 20) +#define MEM_SDMODE_RS (3 << 18) +#define MEM_SDMODE_CS (7 << 15) +#define MEM_SDMODE_TRAS (15 << 11) +#define MEM_SDMODE_TMRD (3 << 9) +#define MEM_SDMODE_TWR (3 << 7) +#define MEM_SDMODE_TRP (3 << 5) +#define MEM_SDMODE_TRCD (3 << 3) +#define MEM_SDMODE_TCL (7 << 0) + +#define MEM_SDMODE_BS_2Bank (0 << 20) +#define MEM_SDMODE_BS_4Bank (1 << 20) +#define MEM_SDMODE_RS_11Row (0 << 18) +#define MEM_SDMODE_RS_12Row (1 << 18) +#define MEM_SDMODE_RS_13Row (2 << 18) +#define MEM_SDMODE_RS_N(N) ((N) << 18) +#define MEM_SDMODE_CS_7Col (0 << 15) +#define MEM_SDMODE_CS_8Col (1 << 15) +#define MEM_SDMODE_CS_9Col (2 << 15) +#define MEM_SDMODE_CS_10Col (3 << 15) +#define MEM_SDMODE_CS_11Col (4 << 15) +#define MEM_SDMODE_CS_N(N) ((N) << 15) +#define MEM_SDMODE_TRAS_N(N) ((N) << 11) +#define MEM_SDMODE_TMRD_N(N) ((N) << 9) +#define MEM_SDMODE_TWR_N(N) ((N) << 7) +#define MEM_SDMODE_TRP_N(N) ((N) << 5) +#define MEM_SDMODE_TRCD_N(N) ((N) << 3) +#define MEM_SDMODE_TCL_N(N) ((N) << 0) /* * MEM_SDADDR register contents definitions */ -#define MEM_SDADDR_E (1<<20) -#define MEM_SDADDR_CSBA (0x03FF<<10) -#define MEM_SDADDR_CSMASK (0x03FF<<0) -#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12) -#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22) +#define MEM_SDADDR_E (1 << 20) +#define MEM_SDADDR_CSBA (0x03FF << 10) +#define MEM_SDADDR_CSMASK (0x03FF << 0) +#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) /* * MEM_SDREFCFG register content definitions */ -#define MEM_SDREFCFG_TRC (15<<28) -#define MEM_SDREFCFG_TRPM (3<<26) -#define MEM_SDREFCFG_E (1<<25) -#define MEM_SDREFCFG_RE (0x1ffffff<<0) -#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC) -#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM) +#define MEM_SDREFCFG_TRC (15 << 28) +#define MEM_SDREFCFG_TRPM (3 << 26) +#define MEM_SDREFCFG_E (1 << 25) +#define MEM_SDREFCFG_RE (0x1ffffff << 0) +#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) +#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) #define MEM_SDREFCFG_REF_N(N) (N) #endif @@ -199,25 +200,25 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; /***********************************************************************/ #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_SDMODE0 (0x0800) -#define MEM_SDMODE1 (0x0808) -#define MEM_SDMODE2 (0x0810) -#define MEM_SDADDR0 (0x0820) -#define MEM_SDADDR1 (0x0828) -#define MEM_SDADDR2 (0x0830) -#define MEM_SDCONFIGA (0x0840) -#define MEM_SDCONFIGB (0x0848) -#define MEM_SDSTAT (0x0850) -#define MEM_SDERRADDR (0x0858) -#define MEM_SDSTRIDE0 (0x0860) -#define MEM_SDSTRIDE1 (0x0868) -#define MEM_SDSTRIDE2 (0x0870) -#define MEM_SDWRMD0 (0x0880) -#define MEM_SDWRMD1 (0x0888) -#define MEM_SDWRMD2 (0x0890) -#define MEM_SDPRECMD (0x08C0) -#define MEM_SDAUTOREF (0x08C8) -#define MEM_SDSREF (0x08D0) +#define MEM_SDMODE0 0x0800 +#define MEM_SDMODE1 0x0808 +#define MEM_SDMODE2 0x0810 +#define MEM_SDADDR0 0x0820 +#define MEM_SDADDR1 0x0828 +#define MEM_SDADDR2 0x0830 +#define MEM_SDCONFIGA 0x0840 +#define MEM_SDCONFIGB 0x0848 +#define MEM_SDSTAT 0x0850 +#define MEM_SDERRADDR 0x0858 +#define MEM_SDSTRIDE0 0x0860 +#define MEM_SDSTRIDE1 0x0868 +#define MEM_SDSTRIDE2 0x0870 +#define MEM_SDWRMD0 0x0880 +#define MEM_SDWRMD1 0x0888 +#define MEM_SDWRMD2 0x0890 +#define MEM_SDPRECMD 0x08C0 +#define MEM_SDAUTOREF 0x08C8 +#define MEM_SDSREF 0x08D0 #define MEM_SDSLEEP MEM_SDSREF #endif @@ -256,9 +257,9 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 #define SYS_PHYS_ADDR 0x11900000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /********************************************************************/ @@ -290,13 +291,13 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define UART3_PHYS_ADDR 0x11400000 #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /********************************************************************/ @@ -333,9 +334,9 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define GPIO2_PHYS_ADDR 0x11700000 #define SYS_PHYS_ADDR 0x11900000 #define LCD_PHYS_ADDR 0x15000000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /***********************************************************************/ @@ -360,17 +361,17 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SYS_PHYS_ADDR 0x11900000 #define DDMA_PHYS_ADDR 0x14002000 #define PE_PHYS_ADDR 0x14008000 -#define PSC0_PHYS_ADDR 0x11A00000 -#define PSC1_PHYS_ADDR 0x11B00000 -#define PSC2_PHYS_ADDR 0x10A00000 -#define PSC3_PHYS_ADDR 0x10B00000 -#define PCI_MEM_PHYS_ADDR 0x400000000ULL -#define PCI_IO_PHYS_ADDR 0x500000000ULL -#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL -#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PSC2_PHYS_ADDR 0x10A00000 +#define PSC3_PHYS_ADDR 0x10B00000 +#define PCI_MEM_PHYS_ADDR 0x400000000ULL +#define PCI_IO_PHYS_ADDR 0x500000000ULL +#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL +#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif /***********************************************************************/ @@ -397,122 +398,121 @@ extern struct au1xxx_irqmap au1xxx_irq_map[]; #define SWCNT_PHYS_ADDR 0x1110010C #define MAEFE_PHYS_ADDR 0x14012000 #define MAEBE_PHYS_ADDR 0x14010000 -#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL -#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL -#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL +#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL #endif - /* Static Bus Controller */ -#define MEM_STCFG0 0xB4001000 -#define MEM_STTIME0 0xB4001004 -#define MEM_STADDR0 0xB4001008 +#define MEM_STCFG0 0xB4001000 +#define MEM_STTIME0 0xB4001004 +#define MEM_STADDR0 0xB4001008 -#define MEM_STCFG1 0xB4001010 -#define MEM_STTIME1 0xB4001014 -#define MEM_STADDR1 0xB4001018 +#define MEM_STCFG1 0xB4001010 +#define MEM_STTIME1 0xB4001014 +#define MEM_STADDR1 0xB4001018 -#define MEM_STCFG2 0xB4001020 -#define MEM_STTIME2 0xB4001024 -#define MEM_STADDR2 0xB4001028 +#define MEM_STCFG2 0xB4001020 +#define MEM_STTIME2 0xB4001024 +#define MEM_STADDR2 0xB4001028 -#define MEM_STCFG3 0xB4001030 -#define MEM_STTIME3 0xB4001034 -#define MEM_STADDR3 0xB4001038 +#define MEM_STCFG3 0xB4001030 +#define MEM_STTIME3 0xB4001034 +#define MEM_STADDR3 0xB4001038 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#define MEM_STNDCTL 0xB4001100 -#define MEM_STSTAT 0xB4001104 +#define MEM_STNDCTL 0xB4001100 +#define MEM_STSTAT 0xB4001104 -#define MEM_STNAND_CMD (0x0) -#define MEM_STNAND_ADDR (0x4) -#define MEM_STNAND_DATA (0x20) +#define MEM_STNAND_CMD 0x0 +#define MEM_STNAND_ADDR 0x4 +#define MEM_STNAND_DATA 0x20 #endif /* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 +#define IC0_CFG0RD 0xB0400040 +#define IC0_CFG0SET 0xB0400040 +#define IC0_CFG0CLR 0xB0400044 -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C +#define IC0_CFG1RD 0xB0400048 +#define IC0_CFG1SET 0xB0400048 +#define IC0_CFG1CLR 0xB040004C -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 +#define IC0_CFG2RD 0xB0400050 +#define IC0_CFG2SET 0xB0400050 +#define IC0_CFG2CLR 0xB0400054 -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C +#define IC0_REQ0INT 0xB0400054 +#define IC0_SRCRD 0xB0400058 +#define IC0_SRCSET 0xB0400058 +#define IC0_SRCCLR 0xB040005C +#define IC0_REQ1INT 0xB040005C -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 +#define IC0_ASSIGNRD 0xB0400060 +#define IC0_ASSIGNSET 0xB0400060 +#define IC0_ASSIGNCLR 0xB0400064 -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C +#define IC0_WAKERD 0xB0400068 +#define IC0_WAKESET 0xB0400068 +#define IC0_WAKECLR 0xB040006C -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 +#define IC0_MASKRD 0xB0400070 +#define IC0_MASKSET 0xB0400070 +#define IC0_MASKCLR 0xB0400074 -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C +#define IC0_RISINGRD 0xB0400078 +#define IC0_RISINGCLR 0xB0400078 +#define IC0_FALLINGRD 0xB040007C +#define IC0_FALLINGCLR 0xB040007C -#define IC0_TESTBIT 0xB0400080 +#define IC0_TESTBIT 0xB0400080 /* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 +#define IC1_CFG0RD 0xB1800040 +#define IC1_CFG0SET 0xB1800040 +#define IC1_CFG0CLR 0xB1800044 -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C +#define IC1_CFG1RD 0xB1800048 +#define IC1_CFG1SET 0xB1800048 +#define IC1_CFG1CLR 0xB180004C -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 +#define IC1_CFG2RD 0xB1800050 +#define IC1_CFG2SET 0xB1800050 +#define IC1_CFG2CLR 0xB1800054 -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C +#define IC1_REQ0INT 0xB1800054 +#define IC1_SRCRD 0xB1800058 +#define IC1_SRCSET 0xB1800058 +#define IC1_SRCCLR 0xB180005C +#define IC1_REQ1INT 0xB180005C -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 +#define IC1_ASSIGNRD 0xB1800060 +#define IC1_ASSIGNSET 0xB1800060 +#define IC1_ASSIGNCLR 0xB1800064 -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C +#define IC1_WAKERD 0xB1800068 +#define IC1_WAKESET 0xB1800068 +#define IC1_WAKECLR 0xB180006C -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 +#define IC1_MASKRD 0xB1800070 +#define IC1_MASKSET 0xB1800070 +#define IC1_MASKCLR 0xB1800074 -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C +#define IC1_RISINGRD 0xB1800078 +#define IC1_RISINGCLR 0xB1800078 +#define IC1_FALLINGRD 0xB180007C +#define IC1_FALLINGCLR 0xB180007C -#define IC1_TESTBIT 0xB1800080 +#define IC1_TESTBIT 0xB1800080 /* Interrupt Configuration Modes */ -#define INTC_INT_DISABLED 0 -#define INTC_INT_RISE_EDGE 0x1 -#define INTC_INT_FALL_EDGE 0x2 -#define INTC_INT_RISE_AND_FALL_EDGE 0x3 -#define INTC_INT_HIGH_LEVEL 0x5 -#define INTC_INT_LOW_LEVEL 0x6 -#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 +#define INTC_INT_DISABLED 0x0 +#define INTC_INT_RISE_EDGE 0x1 +#define INTC_INT_FALL_EDGE 0x2 +#define INTC_INT_RISE_AND_FALL_EDGE 0x3 +#define INTC_INT_HIGH_LEVEL 0x5 +#define INTC_INT_LOW_LEVEL 0x6 +#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7 /* Interrupt Numbers */ /* Au1000 */ @@ -579,18 +579,18 @@ enum soc_au1000_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART2_ADDR 0xB1300000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART2_ADDR 0xB1300000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 +#define AU1000_ETH0_BASE 0xB0500000 +#define AU1000_ETH1_BASE 0xB0510000 +#define AU1000_MAC0_ENABLE 0xB0520000 +#define AU1000_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1000 */ @@ -662,16 +662,16 @@ enum soc_au1500_ints { #define INTC AU1000_PCI_INTC #define INTD AU1000_PCI_INTD -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017fffc -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 +#define AU1500_ETH0_BASE 0xB1500000 +#define AU1500_ETH1_BASE 0xB1510000 +#define AU1500_MAC0_ENABLE 0xB1520000 +#define AU1500_MAC1_ENABLE 0xB1520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1500 */ @@ -739,15 +739,15 @@ enum soc_au1100_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB017fffc +#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ +#define USB_HOST_CONFIG 0xB017FFFC -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 +#define AU1100_ETH0_BASE 0xB0500000 +#define AU1100_MAC0_ENABLE 0xB0520000 #define NUM_ETH_INTERFACES 1 #endif /* CONFIG_SOC_AU1100 */ @@ -826,18 +826,18 @@ enum soc_au1550_ints { #define INTC AU1550_PCI_INTC #define INTD AU1550_PCI_INTD -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 +#define UART3_ADDR 0xB1400000 -#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap -#define USB_OHCI_LEN 0x00060000 -#define USB_HOST_CONFIG 0xB4027ffc +#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ +#define USB_OHCI_LEN 0x00060000 +#define USB_HOST_CONFIG 0xB4027ffc -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 +#define AU1550_ETH0_BASE 0xB0500000 +#define AU1550_ETH1_BASE 0xB0510000 +#define AU1550_MAC0_ENABLE 0xB0520000 +#define AU1550_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ @@ -911,32 +911,32 @@ enum soc_au1200_ints { AU1000_GPIO_31, }; -#define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 - -#define USB_UOC_BASE 0x14020020 -#define USB_UOC_LEN 0x20 -#define USB_OHCI_BASE 0x14020100 -#define USB_OHCI_LEN 0x100 -#define USB_EHCI_BASE 0x14020200 -#define USB_EHCI_LEN 0x100 -#define USB_UDC_BASE 0x14022000 -#define USB_UDC_LEN 0x2000 -#define USB_MSR_BASE 0xB4020000 -#define USB_MSR_MCFG 4 -#define USBMSRMCFG_OMEMEN 0 -#define USBMSRMCFG_OBMEN 1 -#define USBMSRMCFG_EMEMEN 2 -#define USBMSRMCFG_EBMEN 3 -#define USBMSRMCFG_DMEMEN 4 -#define USBMSRMCFG_DBMEN 5 -#define USBMSRMCFG_GMEMEN 6 -#define USBMSRMCFG_OHCCLKEN 16 -#define USBMSRMCFG_EHCCLKEN 17 -#define USBMSRMCFG_UDCCLKEN 18 -#define USBMSRMCFG_PHYPLLEN 19 -#define USBMSRMCFG_RDCOMB 30 -#define USBMSRMCFG_PFEN 31 +#define UART0_ADDR 0xB1100000 +#define UART1_ADDR 0xB1200000 + +#define USB_UOC_BASE 0x14020020 +#define USB_UOC_LEN 0x20 +#define USB_OHCI_BASE 0x14020100 +#define USB_OHCI_LEN 0x100 +#define USB_EHCI_BASE 0x14020200 +#define USB_EHCI_LEN 0x100 +#define USB_UDC_BASE 0x14022000 +#define USB_UDC_LEN 0x2000 +#define USB_MSR_BASE 0xB4020000 +#define USB_MSR_MCFG 4 +#define USBMSRMCFG_OMEMEN 0 +#define USBMSRMCFG_OBMEN 1 +#define USBMSRMCFG_EMEMEN 2 +#define USBMSRMCFG_EBMEN 3 +#define USBMSRMCFG_DMEMEN 4 +#define USBMSRMCFG_DBMEN 5 +#define USBMSRMCFG_GMEMEN 6 +#define USBMSRMCFG_OHCCLKEN 16 +#define USBMSRMCFG_EHCCLKEN 17 +#define USBMSRMCFG_UDCCLKEN 18 +#define USBMSRMCFG_PHYPLLEN 19 +#define USBMSRMCFG_RDCOMB 30 +#define USBMSRMCFG_PFEN 31 #endif /* CONFIG_SOC_AU1200 */ @@ -949,259 +949,258 @@ enum soc_au1200_ints { #define INTX 0xFF /* not valid */ /* Programmable Counters 0 and 1 */ -#define SYS_BASE 0xB1900000 -#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) -# define SYS_CNTRL_E1S (1<<23) -# define SYS_CNTRL_T1S (1<<20) -# define SYS_CNTRL_M21 (1<<19) -# define SYS_CNTRL_M11 (1<<18) -# define SYS_CNTRL_M01 (1<<17) -# define SYS_CNTRL_C1S (1<<16) -# define SYS_CNTRL_BP (1<<14) -# define SYS_CNTRL_EN1 (1<<13) -# define SYS_CNTRL_BT1 (1<<12) -# define SYS_CNTRL_EN0 (1<<11) -# define SYS_CNTRL_BT0 (1<<10) -# define SYS_CNTRL_E0 (1<<8) -# define SYS_CNTRL_E0S (1<<7) -# define SYS_CNTRL_32S (1<<5) -# define SYS_CNTRL_T0S (1<<4) -# define SYS_CNTRL_M20 (1<<3) -# define SYS_CNTRL_M10 (1<<2) -# define SYS_CNTRL_M00 (1<<1) -# define SYS_CNTRL_C0S (1<<0) +#define SYS_BASE 0xB1900000 +#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) +# define SYS_CNTRL_E1S (1 << 23) +# define SYS_CNTRL_T1S (1 << 20) +# define SYS_CNTRL_M21 (1 << 19) +# define SYS_CNTRL_M11 (1 << 18) +# define SYS_CNTRL_M01 (1 << 17) +# define SYS_CNTRL_C1S (1 << 16) +# define SYS_CNTRL_BP (1 << 14) +# define SYS_CNTRL_EN1 (1 << 13) +# define SYS_CNTRL_BT1 (1 << 12) +# define SYS_CNTRL_EN0 (1 << 11) +# define SYS_CNTRL_BT0 (1 << 10) +# define SYS_CNTRL_E0 (1 << 8) +# define SYS_CNTRL_E0S (1 << 7) +# define SYS_CNTRL_32S (1 << 5) +# define SYS_CNTRL_T0S (1 << 4) +# define SYS_CNTRL_M20 (1 << 3) +# define SYS_CNTRL_M10 (1 << 2) +# define SYS_CNTRL_M00 (1 << 1) +# define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ -#define SYS_TOYTRIM (SYS_BASE + 0) -#define SYS_TOYWRITE (SYS_BASE + 4) -#define SYS_TOYMATCH0 (SYS_BASE + 8) -#define SYS_TOYMATCH1 (SYS_BASE + 0xC) -#define SYS_TOYMATCH2 (SYS_BASE + 0x10) -#define SYS_TOYREAD (SYS_BASE + 0x40) +#define SYS_TOYTRIM (SYS_BASE + 0) +#define SYS_TOYWRITE (SYS_BASE + 4) +#define SYS_TOYMATCH0 (SYS_BASE + 8) +#define SYS_TOYMATCH1 (SYS_BASE + 0xC) +#define SYS_TOYMATCH2 (SYS_BASE + 0x10) +#define SYS_TOYREAD (SYS_BASE + 0x40) /* Programmable Counter 1 Registers */ -#define SYS_RTCTRIM (SYS_BASE + 0x44) -#define SYS_RTCWRITE (SYS_BASE + 0x48) -#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) -#define SYS_RTCMATCH1 (SYS_BASE + 0x50) -#define SYS_RTCMATCH2 (SYS_BASE + 0x54) -#define SYS_RTCREAD (SYS_BASE + 0x58) +#define SYS_RTCTRIM (SYS_BASE + 0x44) +#define SYS_RTCWRITE (SYS_BASE + 0x48) +#define SYS_RTCMATCH0 (SYS_BASE + 0x4C) +#define SYS_RTCMATCH1 (SYS_BASE + 0x50) +#define SYS_RTCMATCH2 (SYS_BASE + 0x54) +#define SYS_RTCREAD (SYS_BASE + 0x58) /* I2S Controller */ -#define I2S_DATA 0xB1000000 -# define I2S_DATA_MASK (0xffffff) -#define I2S_CONFIG 0xB1000004 -# define I2S_CONFIG_XU (1<<25) -# define I2S_CONFIG_XO (1<<24) -# define I2S_CONFIG_RU (1<<23) -# define I2S_CONFIG_RO (1<<22) -# define I2S_CONFIG_TR (1<<21) -# define I2S_CONFIG_TE (1<<20) -# define I2S_CONFIG_TF (1<<19) -# define I2S_CONFIG_RR (1<<18) -# define I2S_CONFIG_RE (1<<17) -# define I2S_CONFIG_RF (1<<16) -# define I2S_CONFIG_PD (1<<11) -# define I2S_CONFIG_LB (1<<10) -# define I2S_CONFIG_IC (1<<9) -# define I2S_CONFIG_FM_BIT 7 -# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) -# define I2S_CONFIG_TN (1<<6) -# define I2S_CONFIG_RN (1<<5) -# define I2S_CONFIG_SZ_BIT 0 -# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) - -#define I2S_CONTROL 0xB1000008 -# define I2S_CONTROL_D (1<<1) -# define I2S_CONTROL_CE (1<<0) +#define I2S_DATA 0xB1000000 +# define I2S_DATA_MASK 0xffffff +#define I2S_CONFIG 0xB1000004 +# define I2S_CONFIG_XU (1 << 25) +# define I2S_CONFIG_XO (1 << 24) +# define I2S_CONFIG_RU (1 << 23) +# define I2S_CONFIG_RO (1 << 22) +# define I2S_CONFIG_TR (1 << 21) +# define I2S_CONFIG_TE (1 << 20) +# define I2S_CONFIG_TF (1 << 19) +# define I2S_CONFIG_RR (1 << 18) +# define I2S_CONFIG_RE (1 << 17) +# define I2S_CONFIG_RF (1 << 16) +# define I2S_CONFIG_PD (1 << 11) +# define I2S_CONFIG_LB (1 << 10) +# define I2S_CONFIG_IC (1 << 9) +# define I2S_CONFIG_FM_BIT 7 +# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) +# define I2S_CONFIG_TN (1 << 6) +# define I2S_CONFIG_RN (1 << 5) +# define I2S_CONFIG_SZ_BIT 0 +# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) + +#define I2S_CONTROL 0xB1000008 +# define I2S_CONTROL_D (1 << 1) +# define I2S_CONTROL_CE (1 << 0) /* USB Host Controller */ #ifndef USB_OHCI_LEN -#define USB_OHCI_LEN 0x00100000 +#define USB_OHCI_LEN 0x00100000 #endif #ifndef CONFIG_SOC_AU1200 /* USB Device Controller */ -#define USBD_EP0RD 0xB0200000 -#define USBD_EP0WR 0xB0200004 -#define USBD_EP2WR 0xB0200008 -#define USBD_EP3WR 0xB020000C -#define USBD_EP4RD 0xB0200010 -#define USBD_EP5RD 0xB0200014 -#define USBD_INTEN 0xB0200018 -#define USBD_INTSTAT 0xB020001C -# define USBDEV_INT_SOF (1<<12) -# define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) -# define USBDEV_INT_CMPLT_BIT 0 +#define USBD_EP0RD 0xB0200000 +#define USBD_EP0WR 0xB0200004 +#define USBD_EP2WR 0xB0200008 +#define USBD_EP3WR 0xB020000C +#define USBD_EP4RD 0xB0200010 +#define USBD_EP5RD 0xB0200014 +#define USBD_INTEN 0xB0200018 +#define USBD_INTSTAT 0xB020001C +# define USBDEV_INT_SOF (1 << 12) +# define USBDEV_INT_HF_BIT 6 +# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT) +# define USBDEV_INT_CMPLT_BIT 0 # define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) -#define USBD_CONFIG 0xB0200020 -#define USBD_EP0CS 0xB0200024 -#define USBD_EP2CS 0xB0200028 -#define USBD_EP3CS 0xB020002C -#define USBD_EP4CS 0xB0200030 -#define USBD_EP5CS 0xB0200034 -# define USBDEV_CS_SU (1<<14) -# define USBDEV_CS_NAK (1<<13) -# define USBDEV_CS_ACK (1<<12) -# define USBDEV_CS_BUSY (1<<11) -# define USBDEV_CS_TSIZE_BIT 1 -# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) -# define USBDEV_CS_STALL (1<<0) -#define USBD_EP0RDSTAT 0xB0200040 -#define USBD_EP0WRSTAT 0xB0200044 -#define USBD_EP2WRSTAT 0xB0200048 -#define USBD_EP3WRSTAT 0xB020004C -#define USBD_EP4RDSTAT 0xB0200050 -#define USBD_EP5RDSTAT 0xB0200054 -# define USBDEV_FSTAT_FLUSH (1<<6) -# define USBDEV_FSTAT_UF (1<<5) -# define USBDEV_FSTAT_OF (1<<4) -# define USBDEV_FSTAT_FCNT_BIT 0 +#define USBD_CONFIG 0xB0200020 +#define USBD_EP0CS 0xB0200024 +#define USBD_EP2CS 0xB0200028 +#define USBD_EP3CS 0xB020002C +#define USBD_EP4CS 0xB0200030 +#define USBD_EP5CS 0xB0200034 +# define USBDEV_CS_SU (1 << 14) +# define USBDEV_CS_NAK (1 << 13) +# define USBDEV_CS_ACK (1 << 12) +# define USBDEV_CS_BUSY (1 << 11) +# define USBDEV_CS_TSIZE_BIT 1 +# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT) +# define USBDEV_CS_STALL (1 << 0) +#define USBD_EP0RDSTAT 0xB0200040 +#define USBD_EP0WRSTAT 0xB0200044 +#define USBD_EP2WRSTAT 0xB0200048 +#define USBD_EP3WRSTAT 0xB020004C +#define USBD_EP4RDSTAT 0xB0200050 +#define USBD_EP5RDSTAT 0xB0200054 +# define USBDEV_FSTAT_FLUSH (1 << 6) +# define USBDEV_FSTAT_UF (1 << 5) +# define USBDEV_FSTAT_OF (1 << 4) +# define USBDEV_FSTAT_FCNT_BIT 0 # define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT) -#define USBD_ENABLE 0xB0200058 -# define USBDEV_ENABLE (1<<1) -# define USBDEV_CE (1<<0) +#define USBD_ENABLE 0xB0200058 +# define USBDEV_ENABLE (1 << 1) +# define USBDEV_CE (1 << 0) #endif /* !CONFIG_SOC_AU1200 */ /* Ethernet Controllers */ /* 4 byte offsets from AU1000_ETH_BASE */ -#define MAC_CONTROL 0x0 -# define MAC_RX_ENABLE (1<<2) -# define MAC_TX_ENABLE (1<<3) -# define MAC_DEF_CHECK (1<<5) -# define MAC_SET_BL(X) (((X)&0x3)<<6) -# define MAC_AUTO_PAD (1<<8) -# define MAC_DISABLE_RETRY (1<<10) -# define MAC_DISABLE_BCAST (1<<11) -# define MAC_LATE_COL (1<<12) -# define MAC_HASH_MODE (1<<13) -# define MAC_HASH_ONLY (1<<15) -# define MAC_PASS_ALL (1<<16) -# define MAC_INVERSE_FILTER (1<<17) -# define MAC_PROMISCUOUS (1<<18) -# define MAC_PASS_ALL_MULTI (1<<19) -# define MAC_FULL_DUPLEX (1<<20) -# define MAC_NORMAL_MODE 0 -# define MAC_INT_LOOPBACK (1<<21) -# define MAC_EXT_LOOPBACK (1<<22) -# define MAC_DISABLE_RX_OWN (1<<23) -# define MAC_BIG_ENDIAN (1<<30) -# define MAC_RX_ALL (1<<31) -#define MAC_ADDRESS_HIGH 0x4 -#define MAC_ADDRESS_LOW 0x8 -#define MAC_MCAST_HIGH 0xC -#define MAC_MCAST_LOW 0x10 -#define MAC_MII_CNTRL 0x14 -# define MAC_MII_BUSY (1<<0) -# define MAC_MII_READ 0 -# define MAC_MII_WRITE (1<<1) -# define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6) -# define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11) -#define MAC_MII_DATA 0x18 -#define MAC_FLOW_CNTRL 0x1C -# define MAC_FLOW_CNTRL_BUSY (1<<0) -# define MAC_FLOW_CNTRL_ENABLE (1<<1) -# define MAC_PASS_CONTROL (1<<2) -# define MAC_SET_PAUSE(X) (((X)&0xffff)<<16) -#define MAC_VLAN1_TAG 0x20 -#define MAC_VLAN2_TAG 0x24 +#define MAC_CONTROL 0x0 +# define MAC_RX_ENABLE (1 << 2) +# define MAC_TX_ENABLE (1 << 3) +# define MAC_DEF_CHECK (1 << 5) +# define MAC_SET_BL(X) (((X) & 0x3) << 6) +# define MAC_AUTO_PAD (1 << 8) +# define MAC_DISABLE_RETRY (1 << 10) +# define MAC_DISABLE_BCAST (1 << 11) +# define MAC_LATE_COL (1 << 12) +# define MAC_HASH_MODE (1 << 13) +# define MAC_HASH_ONLY (1 << 15) +# define MAC_PASS_ALL (1 << 16) +# define MAC_INVERSE_FILTER (1 << 17) +# define MAC_PROMISCUOUS (1 << 18) +# define MAC_PASS_ALL_MULTI (1 << 19) +# define MAC_FULL_DUPLEX (1 << 20) +# define MAC_NORMAL_MODE 0 +# define MAC_INT_LOOPBACK (1 << 21) +# define MAC_EXT_LOOPBACK (1 << 22) +# define MAC_DISABLE_RX_OWN (1 << 23) +# define MAC_BIG_ENDIAN (1 << 30) +# define MAC_RX_ALL (1 << 31) +#define MAC_ADDRESS_HIGH 0x4 +#define MAC_ADDRESS_LOW 0x8 +#define MAC_MCAST_HIGH 0xC +#define MAC_MCAST_LOW 0x10 +#define MAC_MII_CNTRL 0x14 +# define MAC_MII_BUSY (1 << 0) +# define MAC_MII_READ 0 +# define MAC_MII_WRITE (1 << 1) +# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) +# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) +#define MAC_MII_DATA 0x18 +#define MAC_FLOW_CNTRL 0x1C +# define MAC_FLOW_CNTRL_BUSY (1 << 0) +# define MAC_FLOW_CNTRL_ENABLE (1 << 1) +# define MAC_PASS_CONTROL (1 << 2) +# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) +#define MAC_VLAN1_TAG 0x20 +#define MAC_VLAN2_TAG 0x24 /* Ethernet Controller Enable */ -# define MAC_EN_CLOCK_ENABLE (1<<0) -# define MAC_EN_RESET0 (1<<1) -# define MAC_EN_TOSS (0<<2) -# define MAC_EN_CACHEABLE (1<<3) -# define MAC_EN_RESET1 (1<<4) -# define MAC_EN_RESET2 (1<<5) -# define MAC_DMA_RESET (1<<6) +# define MAC_EN_CLOCK_ENABLE (1 << 0) +# define MAC_EN_RESET0 (1 << 1) +# define MAC_EN_TOSS (0 << 2) +# define MAC_EN_CACHEABLE (1 << 3) +# define MAC_EN_RESET1 (1 << 4) +# define MAC_EN_RESET2 (1 << 5) +# define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ -#define MAC0_TX_DMA_ADDR 0xB4004000 -#define MAC1_TX_DMA_ADDR 0xB4004200 +#define MAC0_TX_DMA_ADDR 0xB4004000 +#define MAC1_TX_DMA_ADDR 0xB4004200 /* offsets from MAC_TX_RING_ADDR address */ -#define MAC_TX_BUFF0_STATUS 0x0 -# define TX_FRAME_ABORTED (1<<0) -# define TX_JAB_TIMEOUT (1<<1) -# define TX_NO_CARRIER (1<<2) -# define TX_LOSS_CARRIER (1<<3) -# define TX_EXC_DEF (1<<4) -# define TX_LATE_COLL_ABORT (1<<5) -# define TX_EXC_COLL (1<<6) -# define TX_UNDERRUN (1<<7) -# define TX_DEFERRED (1<<8) -# define TX_LATE_COLL (1<<9) -# define TX_COLL_CNT_MASK (0xF<<10) -# define TX_PKT_RETRY (1<<31) -#define MAC_TX_BUFF0_ADDR 0x4 -# define TX_DMA_ENABLE (1<<0) -# define TX_T_DONE (1<<1) -# define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -#define MAC_TX_BUFF0_LEN 0x8 -#define MAC_TX_BUFF1_STATUS 0x10 -#define MAC_TX_BUFF1_ADDR 0x14 -#define MAC_TX_BUFF1_LEN 0x18 -#define MAC_TX_BUFF2_STATUS 0x20 -#define MAC_TX_BUFF2_ADDR 0x24 -#define MAC_TX_BUFF2_LEN 0x28 -#define MAC_TX_BUFF3_STATUS 0x30 -#define MAC_TX_BUFF3_ADDR 0x34 -#define MAC_TX_BUFF3_LEN 0x38 - -#define MAC0_RX_DMA_ADDR 0xB4004100 -#define MAC1_RX_DMA_ADDR 0xB4004300 +#define MAC_TX_BUFF0_STATUS 0x0 +# define TX_FRAME_ABORTED (1 << 0) +# define TX_JAB_TIMEOUT (1 << 1) +# define TX_NO_CARRIER (1 << 2) +# define TX_LOSS_CARRIER (1 << 3) +# define TX_EXC_DEF (1 << 4) +# define TX_LATE_COLL_ABORT (1 << 5) +# define TX_EXC_COLL (1 << 6) +# define TX_UNDERRUN (1 << 7) +# define TX_DEFERRED (1 << 8) +# define TX_LATE_COLL (1 << 9) +# define TX_COLL_CNT_MASK (0xF << 10) +# define TX_PKT_RETRY (1 << 31) +#define MAC_TX_BUFF0_ADDR 0x4 +# define TX_DMA_ENABLE (1 << 0) +# define TX_T_DONE (1 << 1) +# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +#define MAC_TX_BUFF0_LEN 0x8 +#define MAC_TX_BUFF1_STATUS 0x10 +#define MAC_TX_BUFF1_ADDR 0x14 +#define MAC_TX_BUFF1_LEN 0x18 +#define MAC_TX_BUFF2_STATUS 0x20 +#define MAC_TX_BUFF2_ADDR 0x24 +#define MAC_TX_BUFF2_LEN 0x28 +#define MAC_TX_BUFF3_STATUS 0x30 +#define MAC_TX_BUFF3_ADDR 0x34 +#define MAC_TX_BUFF3_LEN 0x38 + +#define MAC0_RX_DMA_ADDR 0xB4004100 +#define MAC1_RX_DMA_ADDR 0xB4004300 /* offsets from MAC_RX_RING_ADDR */ -#define MAC_RX_BUFF0_STATUS 0x0 -# define RX_FRAME_LEN_MASK 0x3fff -# define RX_WDOG_TIMER (1<<14) -# define RX_RUNT (1<<15) -# define RX_OVERLEN (1<<16) -# define RX_COLL (1<<17) -# define RX_ETHER (1<<18) -# define RX_MII_ERROR (1<<19) -# define RX_DRIBBLING (1<<20) -# define RX_CRC_ERROR (1<<21) -# define RX_VLAN1 (1<<22) -# define RX_VLAN2 (1<<23) -# define RX_LEN_ERROR (1<<24) -# define RX_CNTRL_FRAME (1<<25) -# define RX_U_CNTRL_FRAME (1<<26) -# define RX_MCAST_FRAME (1<<27) -# define RX_BCAST_FRAME (1<<28) -# define RX_FILTER_FAIL (1<<29) -# define RX_PACKET_FILTER (1<<30) -# define RX_MISSED_FRAME (1<<31) +#define MAC_RX_BUFF0_STATUS 0x0 +# define RX_FRAME_LEN_MASK 0x3fff +# define RX_WDOG_TIMER (1 << 14) +# define RX_RUNT (1 << 15) +# define RX_OVERLEN (1 << 16) +# define RX_COLL (1 << 17) +# define RX_ETHER (1 << 18) +# define RX_MII_ERROR (1 << 19) +# define RX_DRIBBLING (1 << 20) +# define RX_CRC_ERROR (1 << 21) +# define RX_VLAN1 (1 << 22) +# define RX_VLAN2 (1 << 23) +# define RX_LEN_ERROR (1 << 24) +# define RX_CNTRL_FRAME (1 << 25) +# define RX_U_CNTRL_FRAME (1 << 26) +# define RX_MCAST_FRAME (1 << 27) +# define RX_BCAST_FRAME (1 << 28) +# define RX_FILTER_FAIL (1 << 29) +# define RX_PACKET_FILTER (1 << 30) +# define RX_MISSED_FRAME (1 << 31) # define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ - RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ - RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) -#define MAC_RX_BUFF0_ADDR 0x4 -# define RX_DMA_ENABLE (1<<0) -# define RX_T_DONE (1<<1) -# define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3) -# define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0) -#define MAC_RX_BUFF1_STATUS 0x10 -#define MAC_RX_BUFF1_ADDR 0x14 -#define MAC_RX_BUFF2_STATUS 0x20 -#define MAC_RX_BUFF2_ADDR 0x24 -#define MAC_RX_BUFF3_STATUS 0x30 -#define MAC_RX_BUFF3_ADDR 0x34 - + RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ + RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) +#define MAC_RX_BUFF0_ADDR 0x4 +# define RX_DMA_ENABLE (1 << 0) +# define RX_T_DONE (1 << 1) +# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) +# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) +#define MAC_RX_BUFF1_STATUS 0x10 +#define MAC_RX_BUFF1_ADDR 0x14 +#define MAC_RX_BUFF2_STATUS 0x20 +#define MAC_RX_BUFF2_ADDR 0x24 +#define MAC_RX_BUFF3_STATUS 0x30 +#define MAC_RX_BUFF3_ADDR 0x34 /* UARTS 0-3 */ -#define UART_BASE UART0_ADDR +#define UART_BASE UART0_ADDR #ifdef CONFIG_SOC_AU1200 -#define UART_DEBUG_BASE UART1_ADDR +#define UART_DEBUG_BASE UART1_ADDR #else -#define UART_DEBUG_BASE UART3_ADDR +#define UART_DEBUG_BASE UART3_ADDR #endif #define UART_RX 0 /* Receive buffer */ @@ -1294,341 +1293,337 @@ enum soc_au1200_ints { #define UART_MSR_DCTS 0x01 /* Delta CTS */ #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - - /* SSIO */ -#define SSI0_STATUS 0xB1600000 -# define SSI_STATUS_BF (1<<4) -# define SSI_STATUS_OF (1<<3) -# define SSI_STATUS_UF (1<<2) -# define SSI_STATUS_D (1<<1) -# define SSI_STATUS_B (1<<0) -#define SSI0_INT 0xB1600004 -# define SSI_INT_OI (1<<3) -# define SSI_INT_UI (1<<2) -# define SSI_INT_DI (1<<1) -#define SSI0_INT_ENABLE 0xB1600008 -# define SSI_INTE_OIE (1<<3) -# define SSI_INTE_UIE (1<<2) -# define SSI_INTE_DIE (1<<1) -#define SSI0_CONFIG 0xB1600020 -# define SSI_CONFIG_AO (1<<24) -# define SSI_CONFIG_DO (1<<23) -# define SSI_CONFIG_ALEN_BIT 20 -# define SSI_CONFIG_ALEN_MASK (0x7<<20) -# define SSI_CONFIG_DLEN_BIT 16 -# define SSI_CONFIG_DLEN_MASK (0x7<<16) -# define SSI_CONFIG_DD (1<<11) -# define SSI_CONFIG_AD (1<<10) -# define SSI_CONFIG_BM_BIT 8 -# define SSI_CONFIG_BM_MASK (0x3<<8) -# define SSI_CONFIG_CE (1<<7) -# define SSI_CONFIG_DP (1<<6) -# define SSI_CONFIG_DL (1<<5) -# define SSI_CONFIG_EP (1<<4) -#define SSI0_ADATA 0xB1600024 -# define SSI_AD_D (1<<24) -# define SSI_AD_ADDR_BIT 16 -# define SSI_AD_ADDR_MASK (0xff<<16) -# define SSI_AD_DATA_BIT 0 -# define SSI_AD_DATA_MASK (0xfff<<0) -#define SSI0_CLKDIV 0xB1600028 -#define SSI0_CONTROL 0xB1600100 -# define SSI_CONTROL_CD (1<<1) -# define SSI_CONTROL_E (1<<0) +#define SSI0_STATUS 0xB1600000 +# define SSI_STATUS_BF (1 << 4) +# define SSI_STATUS_OF (1 << 3) +# define SSI_STATUS_UF (1 << 2) +# define SSI_STATUS_D (1 << 1) +# define SSI_STATUS_B (1 << 0) +#define SSI0_INT 0xB1600004 +# define SSI_INT_OI (1 << 3) +# define SSI_INT_UI (1 << 2) +# define SSI_INT_DI (1 << 1) +#define SSI0_INT_ENABLE 0xB1600008 +# define SSI_INTE_OIE (1 << 3) +# define SSI_INTE_UIE (1 << 2) +# define SSI_INTE_DIE (1 << 1) +#define SSI0_CONFIG 0xB1600020 +# define SSI_CONFIG_AO (1 << 24) +# define SSI_CONFIG_DO (1 << 23) +# define SSI_CONFIG_ALEN_BIT 20 +# define SSI_CONFIG_ALEN_MASK (0x7 << 20) +# define SSI_CONFIG_DLEN_BIT 16 +# define SSI_CONFIG_DLEN_MASK (0x7 << 16) +# define SSI_CONFIG_DD (1 << 11) +# define SSI_CONFIG_AD (1 << 10) +# define SSI_CONFIG_BM_BIT 8 +# define SSI_CONFIG_BM_MASK (0x3 << 8) +# define SSI_CONFIG_CE (1 << 7) +# define SSI_CONFIG_DP (1 << 6) +# define SSI_CONFIG_DL (1 << 5) +# define SSI_CONFIG_EP (1 << 4) +#define SSI0_ADATA 0xB1600024 +# define SSI_AD_D (1 << 24) +# define SSI_AD_ADDR_BIT 16 +# define SSI_AD_ADDR_MASK (0xff << 16) +# define SSI_AD_DATA_BIT 0 +# define SSI_AD_DATA_MASK (0xfff << 0) +#define SSI0_CLKDIV 0xB1600028 +#define SSI0_CONTROL 0xB1600100 +# define SSI_CONTROL_CD (1 << 1) +# define SSI_CONTROL_E (1 << 0) /* SSI1 */ -#define SSI1_STATUS 0xB1680000 -#define SSI1_INT 0xB1680004 -#define SSI1_INT_ENABLE 0xB1680008 -#define SSI1_CONFIG 0xB1680020 -#define SSI1_ADATA 0xB1680024 -#define SSI1_CLKDIV 0xB1680028 -#define SSI1_ENABLE 0xB1680100 +#define SSI1_STATUS 0xB1680000 +#define SSI1_INT 0xB1680004 +#define SSI1_INT_ENABLE 0xB1680008 +#define SSI1_CONFIG 0xB1680020 +#define SSI1_ADATA 0xB1680024 +#define SSI1_CLKDIV 0xB1680028 +#define SSI1_ENABLE 0xB1680100 /* * Register content definitions */ -#define SSI_STATUS_BF (1<<4) -#define SSI_STATUS_OF (1<<3) -#define SSI_STATUS_UF (1<<2) -#define SSI_STATUS_D (1<<1) -#define SSI_STATUS_B (1<<0) +#define SSI_STATUS_BF (1 << 4) +#define SSI_STATUS_OF (1 << 3) +#define SSI_STATUS_UF (1 << 2) +#define SSI_STATUS_D (1 << 1) +#define SSI_STATUS_B (1 << 0) /* SSI_INT */ -#define SSI_INT_OI (1<<3) -#define SSI_INT_UI (1<<2) -#define SSI_INT_DI (1<<1) +#define SSI_INT_OI (1 << 3) +#define SSI_INT_UI (1 << 2) +#define SSI_INT_DI (1 << 1) /* SSI_INTEN */ -#define SSI_INTEN_OIE (1<<3) -#define SSI_INTEN_UIE (1<<2) -#define SSI_INTEN_DIE (1<<1) - -#define SSI_CONFIG_AO (1<<24) -#define SSI_CONFIG_DO (1<<23) -#define SSI_CONFIG_ALEN (7<<20) -#define SSI_CONFIG_DLEN (15<<16) -#define SSI_CONFIG_DD (1<<11) -#define SSI_CONFIG_AD (1<<10) -#define SSI_CONFIG_BM (3<<8) -#define SSI_CONFIG_CE (1<<7) -#define SSI_CONFIG_DP (1<<6) -#define SSI_CONFIG_DL (1<<5) -#define SSI_CONFIG_EP (1<<4) -#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20) -#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16) -#define SSI_CONFIG_BM_HI (0<<8) -#define SSI_CONFIG_BM_LO (1<<8) -#define SSI_CONFIG_BM_CY (2<<8) - -#define SSI_ADATA_D (1<<24) -#define SSI_ADATA_ADDR (0xFF<<16) -#define SSI_ADATA_DATA (0x0FFF) -#define SSI_ADATA_ADDR_N(N) (N<<16) - -#define SSI_ENABLE_CD (1<<1) -#define SSI_ENABLE_E (1<<0) - +#define SSI_INTEN_OIE (1 << 3) +#define SSI_INTEN_UIE (1 << 2) +#define SSI_INTEN_DIE (1 << 1) + +#define SSI_CONFIG_AO (1 << 24) +#define SSI_CONFIG_DO (1 << 23) +#define SSI_CONFIG_ALEN (7 << 20) +#define SSI_CONFIG_DLEN (15 << 16) +#define SSI_CONFIG_DD (1 << 11) +#define SSI_CONFIG_AD (1 << 10) +#define SSI_CONFIG_BM (3 << 8) +#define SSI_CONFIG_CE (1 << 7) +#define SSI_CONFIG_DP (1 << 6) +#define SSI_CONFIG_DL (1 << 5) +#define SSI_CONFIG_EP (1 << 4) +#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) +#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) +#define SSI_CONFIG_BM_HI (0 << 8) +#define SSI_CONFIG_BM_LO (1 << 8) +#define SSI_CONFIG_BM_CY (2 << 8) + +#define SSI_ADATA_D (1 << 24) +#define SSI_ADATA_ADDR (0xFF << 16) +#define SSI_ADATA_DATA 0x0FFF +#define SSI_ADATA_ADDR_N(N) (N << 16) + +#define SSI_ENABLE_CD (1 << 1) +#define SSI_ENABLE_E (1 << 0) /* IrDA Controller */ -#define IRDA_BASE 0xB0300000 -#define IR_RING_PTR_STATUS (IRDA_BASE+0x00) -#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04) -#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08) -#define IR_RING_SIZE (IRDA_BASE+0x0C) -#define IR_RING_PROMPT (IRDA_BASE+0x10) -#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14) -#define IR_INT_CLEAR (IRDA_BASE+0x18) -#define IR_CONFIG_1 (IRDA_BASE+0x20) -# define IR_RX_INVERT_LED (1<<0) -# define IR_TX_INVERT_LED (1<<1) -# define IR_ST (1<<2) -# define IR_SF (1<<3) -# define IR_SIR (1<<4) -# define IR_MIR (1<<5) -# define IR_FIR (1<<6) -# define IR_16CRC (1<<7) -# define IR_TD (1<<8) -# define IR_RX_ALL (1<<9) -# define IR_DMA_ENABLE (1<<10) -# define IR_RX_ENABLE (1<<11) -# define IR_TX_ENABLE (1<<12) -# define IR_LOOPBACK (1<<14) -# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ - IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) -#define IR_SIR_FLAGS (IRDA_BASE+0x24) -#define IR_ENABLE (IRDA_BASE+0x28) -# define IR_RX_STATUS (1<<9) -# define IR_TX_STATUS (1<<10) -#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C) -#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30) -#define IR_MAX_PKT_LEN (IRDA_BASE+0x34) -#define IR_RX_BYTE_CNT (IRDA_BASE+0x38) -#define IR_CONFIG_2 (IRDA_BASE+0x3C) -# define IR_MODE_INV (1<<0) -# define IR_ONE_PIN (1<<1) -#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40) +#define IRDA_BASE 0xB0300000 +#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00) +#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04) +#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08) +#define IR_RING_SIZE (IRDA_BASE + 0x0C) +#define IR_RING_PROMPT (IRDA_BASE + 0x10) +#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14) +#define IR_INT_CLEAR (IRDA_BASE + 0x18) +#define IR_CONFIG_1 (IRDA_BASE + 0x20) +# define IR_RX_INVERT_LED (1 << 0) +# define IR_TX_INVERT_LED (1 << 1) +# define IR_ST (1 << 2) +# define IR_SF (1 << 3) +# define IR_SIR (1 << 4) +# define IR_MIR (1 << 5) +# define IR_FIR (1 << 6) +# define IR_16CRC (1 << 7) +# define IR_TD (1 << 8) +# define IR_RX_ALL (1 << 9) +# define IR_DMA_ENABLE (1 << 10) +# define IR_RX_ENABLE (1 << 11) +# define IR_TX_ENABLE (1 << 12) +# define IR_LOOPBACK (1 << 14) +# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \ + IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC) +#define IR_SIR_FLAGS (IRDA_BASE + 0x24) +#define IR_ENABLE (IRDA_BASE + 0x28) +# define IR_RX_STATUS (1 << 9) +# define IR_TX_STATUS (1 << 10) +#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C) +#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30) +#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34) +#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38) +#define IR_CONFIG_2 (IRDA_BASE + 0x3C) +# define IR_MODE_INV (1 << 0) +# define IR_ONE_PIN (1 << 1) +#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40) /* GPIO */ -#define SYS_PINFUNC 0xB190002C -# define SYS_PF_USB (1<<15) /* 2nd USB device/host */ -# define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */ -# define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */ -# define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */ -# define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */ -# define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */ -# define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */ -# define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */ -# define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */ -# define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */ -# define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */ -# define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */ -# define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */ -# define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */ -# define SYS_PF_A97 (1<<1) /* AC97/SSL1 */ -# define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */ - -/* Au1100 Only */ -# define SYS_PF_PC (1<<18) /* PCMCIA/GPIO[207:204] */ -# define SYS_PF_LCD (1<<17) /* extern lcd/GPIO[203:200] */ -# define SYS_PF_CS (1<<16) /* EXTCLK0/32khz to gpio2 */ -# define SYS_PF_EX0 (1<<9) /* gpio2/clock */ - -/* Au1550 Only. Redefines lots of pins */ -# define SYS_PF_PSC2_MASK (7 << 17) -# define SYS_PF_PSC2_AC97 (0) -# define SYS_PF_PSC2_SPI (0) -# define SYS_PF_PSC2_I2S (1 << 17) -# define SYS_PF_PSC2_SMBUS (3 << 17) -# define SYS_PF_PSC2_GPIO (7 << 17) -# define SYS_PF_PSC3_MASK (7 << 20) -# define SYS_PF_PSC3_AC97 (0) -# define SYS_PF_PSC3_SPI (0) -# define SYS_PF_PSC3_I2S (1 << 20) -# define SYS_PF_PSC3_SMBUS (3 << 20) -# define SYS_PF_PSC3_GPIO (7 << 20) -# define SYS_PF_PSC1_S1 (1 << 1) -# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) - -/* Au1200 Only */ +#define SYS_PINFUNC 0xB190002C +# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ +# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ +# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ +# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ +# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ +# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ +# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ +# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ +# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ +# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ +# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ +# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ +# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ +# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ +# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ +# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ + +/* Au1100 only */ +# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ +# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ +# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ +# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ + +/* Au1550 only. Redefines lots of pins */ +# define SYS_PF_PSC2_MASK (7 << 17) +# define SYS_PF_PSC2_AC97 0 +# define SYS_PF_PSC2_SPI 0 +# define SYS_PF_PSC2_I2S (1 << 17) +# define SYS_PF_PSC2_SMBUS (3 << 17) +# define SYS_PF_PSC2_GPIO (7 << 17) +# define SYS_PF_PSC3_MASK (7 << 20) +# define SYS_PF_PSC3_AC97 0 +# define SYS_PF_PSC3_SPI 0 +# define SYS_PF_PSC3_I2S (1 << 20) +# define SYS_PF_PSC3_SMBUS (3 << 20) +# define SYS_PF_PSC3_GPIO (7 << 20) +# define SYS_PF_PSC1_S1 (1 << 1) +# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) + +/* Au1200 only */ #ifdef CONFIG_SOC_AU1200 -#define SYS_PINFUNC_DMA (1<<31) -#define SYS_PINFUNC_S0A (1<<30) -#define SYS_PINFUNC_S1A (1<<29) -#define SYS_PINFUNC_LP0 (1<<28) -#define SYS_PINFUNC_LP1 (1<<27) -#define SYS_PINFUNC_LD16 (1<<26) -#define SYS_PINFUNC_LD8 (1<<25) -#define SYS_PINFUNC_LD1 (1<<24) -#define SYS_PINFUNC_LD0 (1<<23) -#define SYS_PINFUNC_P1A (3<<21) -#define SYS_PINFUNC_P1B (1<<20) -#define SYS_PINFUNC_FS3 (1<<19) -#define SYS_PINFUNC_P0A (3<<17) -#define SYS_PINFUNC_CS (1<<16) -#define SYS_PINFUNC_CIM (1<<15) -#define SYS_PINFUNC_P1C (1<<14) -#define SYS_PINFUNC_U1T (1<<12) -#define SYS_PINFUNC_U1R (1<<11) -#define SYS_PINFUNC_EX1 (1<<10) -#define SYS_PINFUNC_EX0 (1<<9) -#define SYS_PINFUNC_U0R (1<<8) -#define SYS_PINFUNC_MC (1<<7) -#define SYS_PINFUNC_S0B (1<<6) -#define SYS_PINFUNC_S0C (1<<5) -#define SYS_PINFUNC_P0B (1<<4) -#define SYS_PINFUNC_U0T (1<<3) -#define SYS_PINFUNC_S1B (1<<2) +#define SYS_PINFUNC_DMA (1 << 31) +#define SYS_PINFUNC_S0A (1 << 30) +#define SYS_PINFUNC_S1A (1 << 29) +#define SYS_PINFUNC_LP0 (1 << 28) +#define SYS_PINFUNC_LP1 (1 << 27) +#define SYS_PINFUNC_LD16 (1 << 26) +#define SYS_PINFUNC_LD8 (1 << 25) +#define SYS_PINFUNC_LD1 (1 << 24) +#define SYS_PINFUNC_LD0 (1 << 23) +#define SYS_PINFUNC_P1A (3 << 21) +#define SYS_PINFUNC_P1B (1 << 20) +#define SYS_PINFUNC_FS3 (1 << 19) +#define SYS_PINFUNC_P0A (3 << 17) +#define SYS_PINFUNC_CS (1 << 16) +#define SYS_PINFUNC_CIM (1 << 15) +#define SYS_PINFUNC_P1C (1 << 14) +#define SYS_PINFUNC_U1T (1 << 12) +#define SYS_PINFUNC_U1R (1 << 11) +#define SYS_PINFUNC_EX1 (1 << 10) +#define SYS_PINFUNC_EX0 (1 << 9) +#define SYS_PINFUNC_U0R (1 << 8) +#define SYS_PINFUNC_MC (1 << 7) +#define SYS_PINFUNC_S0B (1 << 6) +#define SYS_PINFUNC_S0C (1 << 5) +#define SYS_PINFUNC_P0B (1 << 4) +#define SYS_PINFUNC_U0T (1 << 3) +#define SYS_PINFUNC_S1B (1 << 2) #endif -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 +#define SYS_TRIOUTRD 0xB1900100 +#define SYS_TRIOUTCLR 0xB1900100 +#define SYS_OUTPUTRD 0xB1900108 +#define SYS_OUTPUTSET 0xB1900108 +#define SYS_OUTPUTCLR 0xB190010C +#define SYS_PINSTATERD 0xB1900110 +#define SYS_PININPUTEN 0xB1900110 /* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) +#define GPIO2_BASE 0xB1700000 +#define GPIO2_DIR (GPIO2_BASE + 0) +#define GPIO2_OUTPUT (GPIO2_BASE + 8) +#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) +#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) +#define GPIO2_ENABLE (GPIO2_BASE + 0x14) /* Power Management */ -#define SYS_SCRATCH0 0xB1900018 -#define SYS_SCRATCH1 0xB190001C -#define SYS_WAKEMSK 0xB1900034 -#define SYS_ENDIAN 0xB1900038 -#define SYS_POWERCTRL 0xB190003C -#define SYS_WAKESRC 0xB190005C -#define SYS_SLPPWR 0xB1900078 -#define SYS_SLEEP 0xB190007C +#define SYS_SCRATCH0 0xB1900018 +#define SYS_SCRATCH1 0xB190001C +#define SYS_WAKEMSK 0xB1900034 +#define SYS_ENDIAN 0xB1900038 +#define SYS_POWERCTRL 0xB190003C +#define SYS_WAKESRC 0xB190005C +#define SYS_SLPPWR 0xB1900078 +#define SYS_SLEEP 0xB190007C /* Clock Controller */ -#define SYS_FREQCTRL0 0xB1900020 -# define SYS_FC_FRDIV2_BIT 22 -# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) -# define SYS_FC_FE2 (1<<21) -# define SYS_FC_FS2 (1<<20) -# define SYS_FC_FRDIV1_BIT 12 -# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) -# define SYS_FC_FE1 (1<<11) -# define SYS_FC_FS1 (1<<10) -# define SYS_FC_FRDIV0_BIT 2 -# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) -# define SYS_FC_FE0 (1<<1) -# define SYS_FC_FS0 (1<<0) -#define SYS_FREQCTRL1 0xB1900024 -# define SYS_FC_FRDIV5_BIT 22 -# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) -# define SYS_FC_FE5 (1<<21) -# define SYS_FC_FS5 (1<<20) -# define SYS_FC_FRDIV4_BIT 12 -# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) -# define SYS_FC_FE4 (1<<11) -# define SYS_FC_FS4 (1<<10) -# define SYS_FC_FRDIV3_BIT 2 -# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) -# define SYS_FC_FE3 (1<<1) -# define SYS_FC_FS3 (1<<0) -#define SYS_CLKSRC 0xB1900028 -# define SYS_CS_ME1_BIT 27 -# define SYS_CS_ME1_MASK (0x7<<SYS_CS_ME1_BIT) -# define SYS_CS_DE1 (1<<26) -# define SYS_CS_CE1 (1<<25) -# define SYS_CS_ME0_BIT 22 -# define SYS_CS_ME0_MASK (0x7<<SYS_CS_ME0_BIT) -# define SYS_CS_DE0 (1<<21) -# define SYS_CS_CE0 (1<<20) -# define SYS_CS_MI2_BIT 17 -# define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT) -# define SYS_CS_DI2 (1<<16) -# define SYS_CS_CI2 (1<<15) +#define SYS_FREQCTRL0 0xB1900020 +# define SYS_FC_FRDIV2_BIT 22 +# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) +# define SYS_FC_FE2 (1 << 21) +# define SYS_FC_FS2 (1 << 20) +# define SYS_FC_FRDIV1_BIT 12 +# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) +# define SYS_FC_FE1 (1 << 11) +# define SYS_FC_FS1 (1 << 10) +# define SYS_FC_FRDIV0_BIT 2 +# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) +# define SYS_FC_FE0 (1 << 1) +# define SYS_FC_FS0 (1 << 0) +#define SYS_FREQCTRL1 0xB1900024 +# define SYS_FC_FRDIV5_BIT 22 +# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) +# define SYS_FC_FE5 (1 << 21) +# define SYS_FC_FS5 (1 << 20) +# define SYS_FC_FRDIV4_BIT 12 +# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) +# define SYS_FC_FE4 (1 << 11) +# define SYS_FC_FS4 (1 << 10) +# define SYS_FC_FRDIV3_BIT 2 +# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) +# define SYS_FC_FE3 (1 << 1) +# define SYS_FC_FS3 (1 << 0) +#define SYS_CLKSRC 0xB1900028 +# define SYS_CS_ME1_BIT 27 +# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) +# define SYS_CS_DE1 (1 << 26) +# define SYS_CS_CE1 (1 << 25) +# define SYS_CS_ME0_BIT 22 +# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) +# define SYS_CS_DE0 (1 << 21) +# define SYS_CS_CE0 (1 << 20) +# define SYS_CS_MI2_BIT 17 +# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) +# define SYS_CS_DI2 (1 << 16) +# define SYS_CS_CI2 (1 << 15) #ifdef CONFIG_SOC_AU1100 -# define SYS_CS_ML_BIT 7 -# define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT) -# define SYS_CS_DL (1<<6) -# define SYS_CS_CL (1<<5) +# define SYS_CS_ML_BIT 7 +# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) +# define SYS_CS_DL (1 << 6) +# define SYS_CS_CL (1 << 5) #else -# define SYS_CS_MUH_BIT 12 -# define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT) -# define SYS_CS_DUH (1<<11) -# define SYS_CS_CUH (1<<10) -# define SYS_CS_MUD_BIT 7 -# define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT) -# define SYS_CS_DUD (1<<6) -# define SYS_CS_CUD (1<<5) +# define SYS_CS_MUH_BIT 12 +# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) +# define SYS_CS_DUH (1 << 11) +# define SYS_CS_CUH (1 << 10) +# define SYS_CS_MUD_BIT 7 +# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) +# define SYS_CS_DUD (1 << 6) +# define SYS_CS_CUD (1 << 5) #endif -# define SYS_CS_MIR_BIT 2 -# define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT) -# define SYS_CS_DIR (1<<1) -# define SYS_CS_CIR (1<<0) - -# define SYS_CS_MUX_AUX 0x1 -# define SYS_CS_MUX_FQ0 0x2 -# define SYS_CS_MUX_FQ1 0x3 -# define SYS_CS_MUX_FQ2 0x4 -# define SYS_CS_MUX_FQ3 0x5 -# define SYS_CS_MUX_FQ4 0x6 -# define SYS_CS_MUX_FQ5 0x7 -#define SYS_CPUPLL 0xB1900060 -#define SYS_AUXPLL 0xB1900064 +# define SYS_CS_MIR_BIT 2 +# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) +# define SYS_CS_DIR (1 << 1) +# define SYS_CS_CIR (1 << 0) + +# define SYS_CS_MUX_AUX 0x1 +# define SYS_CS_MUX_FQ0 0x2 +# define SYS_CS_MUX_FQ1 0x3 +# define SYS_CS_MUX_FQ2 0x4 +# define SYS_CS_MUX_FQ3 0x5 +# define SYS_CS_MUX_FQ4 0x6 +# define SYS_CS_MUX_FQ5 0x7 +#define SYS_CPUPLL 0xB1900060 +#define SYS_AUXPLL 0xB1900064 /* AC97 Controller */ -#define AC97C_CONFIG 0xB0000000 -# define AC97C_RECV_SLOTS_BIT 13 +#define AC97C_CONFIG 0xB0000000 +# define AC97C_RECV_SLOTS_BIT 13 # define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) -# define AC97C_XMIT_SLOTS_BIT 3 +# define AC97C_XMIT_SLOTS_BIT 3 # define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) -# define AC97C_SG (1<<2) -# define AC97C_SYNC (1<<1) -# define AC97C_RESET (1<<0) -#define AC97C_STATUS 0xB0000004 -# define AC97C_XU (1<<11) -# define AC97C_XO (1<<10) -# define AC97C_RU (1<<9) -# define AC97C_RO (1<<8) -# define AC97C_READY (1<<7) -# define AC97C_CP (1<<6) -# define AC97C_TR (1<<5) -# define AC97C_TE (1<<4) -# define AC97C_TF (1<<3) -# define AC97C_RR (1<<2) -# define AC97C_RE (1<<1) -# define AC97C_RF (1<<0) -#define AC97C_DATA 0xB0000008 -#define AC97C_CMD 0xB000000C -# define AC97C_WD_BIT 16 -# define AC97C_READ (1<<7) -# define AC97C_INDEX_MASK 0x7f -#define AC97C_CNTRL 0xB0000010 -# define AC97C_RS (1<<1) -# define AC97C_CE (1<<0) - +# define AC97C_SG (1 << 2) +# define AC97C_SYNC (1 << 1) +# define AC97C_RESET (1 << 0) +#define AC97C_STATUS 0xB0000004 +# define AC97C_XU (1 << 11) +# define AC97C_XO (1 << 10) +# define AC97C_RU (1 << 9) +# define AC97C_RO (1 << 8) +# define AC97C_READY (1 << 7) +# define AC97C_CP (1 << 6) +# define AC97C_TR (1 << 5) +# define AC97C_TE (1 << 4) +# define AC97C_TF (1 << 3) +# define AC97C_RR (1 << 2) +# define AC97C_RE (1 << 1) +# define AC97C_RF (1 << 0) +#define AC97C_DATA 0xB0000008 +#define AC97C_CMD 0xB000000C +# define AC97C_WD_BIT 16 +# define AC97C_READ (1 << 7) +# define AC97C_INDEX_MASK 0x7f +#define AC97C_CNTRL 0xB0000010 +# define AC97C_RS (1 << 1) +# define AC97C_CE (1 << 0) /* Secure Digital (SD) Controller */ #define SD0_XMIT_FIFO 0xB0600000 @@ -1638,73 +1633,74 @@ enum soc_au1200_ints { #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ -#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr -#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) -#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) -# define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27)) -#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) -#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) -#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) -#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) +#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ +#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0) +#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4) +# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \ + (1 << 25) | (1 << 26) | (1 << 27)) +#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8) +#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC) +#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10) +#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14) #define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18) -#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) -#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) -#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) -#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) -#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) -#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) -#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) +#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C) +#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20) +#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100) +#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104) +#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108) +#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C) +#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110) -#define Au1500_PCI_HDR 0xB4005100 // virtual, kseg0 addr +#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */ -/* All of our structures, like pci resource, have 32 bit members. +/* + * All of our structures, like PCI resource, have 32-bit members. * Drivers are expected to do an ioremap on the PCI MEM resource, but it's - * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch + * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and - * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM - * addresses. For PCI IO, it's simpler because we get to do the ioremap + * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM + * addresses. For PCI I/O, it's simpler because we get to do the ioremap * ourselves and then adjust the device's resources. */ -#define Au1500_EXT_CFG 0x600000000ULL -#define Au1500_EXT_CFG_TYPE1 0x680000000ULL -#define Au1500_PCI_IO_START 0x500000000ULL -#define Au1500_PCI_IO_END 0x5000FFFFFULL -#define Au1500_PCI_MEM_START 0x440000000ULL -#define Au1500_PCI_MEM_END 0x44FFFFFFFULL +#define Au1500_EXT_CFG 0x600000000ULL +#define Au1500_EXT_CFG_TYPE1 0x680000000ULL +#define Au1500_PCI_IO_START 0x500000000ULL +#define Au1500_PCI_IO_END 0x5000FFFFFULL +#define Au1500_PCI_MEM_START 0x440000000ULL +#define Au1500_PCI_MEM_END 0x44FFFFFFFULL #define PCI_IO_START 0x00001000 #define PCI_IO_END 0x000FFFFF #define PCI_MEM_START 0x40000000 #define PCI_MEM_END 0x4FFFFFFF -#define PCI_FIRST_DEVFN (0<<3) -#define PCI_LAST_DEVFN (19<<3) +#define PCI_FIRST_DEVFN (0 << 3) +#define PCI_LAST_DEVFN (19 << 3) -#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff #else /* Au1000 and Au1100 and Au1200 */ -/* don't allow any legacy ports probing */ -#define IOPORT_RESOURCE_START 0x10000000 -#define IOPORT_RESOURCE_END 0xffffffff -#define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +/* Don't allow any legacy ports probing */ +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff -#define PCI_IO_START 0 -#define PCI_IO_END 0 -#define PCI_MEM_START 0 -#define PCI_MEM_END 0 +#define PCI_IO_START 0 +#define PCI_IO_END 0 +#define PCI_MEM_START 0 +#define PCI_MEM_END 0 #define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 0 +#define PCI_LAST_DEVFN 0 #endif #ifndef _LANGUAGE_ASSEMBLY -typedef volatile struct -{ +typedef volatile struct { /* 0x0000 */ u32 toytrim; /* 0x0004 */ u32 toywrite; /* 0x0008 */ u32 toymatch0; @@ -1746,13 +1742,14 @@ typedef volatile struct /* 0x010C */ u32 outputclr; /* 0x0110 */ u32 pinstaterd; #define pininputen pinstaterd - } AU1X00_SYS; -static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE; +static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; #endif -/* Processor information base on prid. + +/* + * Processor information based on PRID. * Copied from PowerPC. */ #ifndef _LANGUAGE_ASSEMBLY @@ -1767,9 +1764,8 @@ struct cpu_spec { unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */ }; -extern struct cpu_spec cpu_specs[]; -extern struct cpu_spec *cur_cpu_spec[]; +extern struct cpu_spec cpu_specs[]; +extern struct cpu_spec *cur_cpu_spec[]; #endif #endif - diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h index 9f29520e8fb..c333b4e1cd4 100644 --- a/include/asm-mips/mach-au1x00/au1000_dma.h +++ b/include/asm-mips/mach-au1x00/au1000_dma.h @@ -1,11 +1,10 @@ /* * BRIEF MODULE DESCRIPTION - * Defines for using and allocating dma channels on the Alchemy - * Au1000 mips processor. + * Defines for using and allocating DMA channels on the Alchemy + * Au1x00 MIPS processors. * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -31,7 +30,7 @@ #ifndef __ASM_AU1000_DMA_H #define __ASM_AU1000_DMA_H -#include <asm/io.h> /* need byte IO */ +#include <linux/io.h> /* need byte IO */ #include <linux/spinlock.h> /* And spinlocks */ #include <linux/delay.h> #include <asm/system.h> @@ -50,36 +49,36 @@ #define DMA_DAH_MASK (0x0f << 20) #define DMA_DID_BIT 16 #define DMA_DID_MASK (0x0f << DMA_DID_BIT) -#define DMA_DS (1<<15) -#define DMA_BE (1<<13) -#define DMA_DR (1<<12) -#define DMA_TS8 (1<<11) +#define DMA_DS (1 << 15) +#define DMA_BE (1 << 13) +#define DMA_DR (1 << 12) +#define DMA_TS8 (1 << 11) #define DMA_DW_BIT 9 #define DMA_DW_MASK (0x03 << DMA_DW_BIT) #define DMA_DW8 (0 << DMA_DW_BIT) #define DMA_DW16 (1 << DMA_DW_BIT) #define DMA_DW32 (2 << DMA_DW_BIT) -#define DMA_NC (1<<8) -#define DMA_IE (1<<7) -#define DMA_HALT (1<<6) -#define DMA_GO (1<<5) -#define DMA_AB (1<<4) -#define DMA_D1 (1<<3) -#define DMA_BE1 (1<<2) -#define DMA_D0 (1<<1) -#define DMA_BE0 (1<<0) - -#define DMA_PERIPHERAL_ADDR 0x00000008 -#define DMA_BUFFER0_START 0x0000000C -#define DMA_BUFFER1_START 0x00000014 -#define DMA_BUFFER0_COUNT 0x00000010 -#define DMA_BUFFER1_COUNT 0x00000018 -#define DMA_BAH_BIT 16 -#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) -#define DMA_COUNT_BIT 0 -#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) - -/* DMA Device ID's follow */ +#define DMA_NC (1 << 8) +#define DMA_IE (1 << 7) +#define DMA_HALT (1 << 6) +#define DMA_GO (1 << 5) +#define DMA_AB (1 << 4) +#define DMA_D1 (1 << 3) +#define DMA_BE1 (1 << 2) +#define DMA_D0 (1 << 1) +#define DMA_BE0 (1 << 0) + +#define DMA_PERIPHERAL_ADDR 0x00000008 +#define DMA_BUFFER0_START 0x0000000C +#define DMA_BUFFER1_START 0x00000014 +#define DMA_BUFFER0_COUNT 0x00000010 +#define DMA_BUFFER1_COUNT 0x00000018 +#define DMA_BAH_BIT 16 +#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT) +#define DMA_COUNT_BIT 0 +#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT) + +/* DMA Device IDs follow */ enum { DMA_ID_UART0_TX = 0, DMA_ID_UART0_RX, @@ -110,7 +109,8 @@ enum { }; struct dma_chan { - int dev_id; // this channel is allocated if >=0, free otherwise + int dev_id; /* this channel is allocated if >= 0, */ + /* free otherwise */ unsigned int io; const char *dev_str; int irq; @@ -132,23 +132,23 @@ extern int au1000_dma_read_proc(char *buf, char **start, off_t fpos, extern void dump_au1000_dma_channel(unsigned int dmanr); extern spinlock_t au1000_dma_spin_lock; - -static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr) +static inline struct dma_chan *get_dma_chan(unsigned int dmanr) { - if (dmanr >= NUM_AU1000_DMA_CHANNELS - || au1000_dma_table[dmanr].dev_id < 0) + if (dmanr >= NUM_AU1000_DMA_CHANNELS || + au1000_dma_table[dmanr].dev_id < 0) return NULL; return &au1000_dma_table[dmanr]; } -static __inline__ unsigned long claim_dma_lock(void) +static inline unsigned long claim_dma_lock(void) { unsigned long flags; + spin_lock_irqsave(&au1000_dma_spin_lock, flags); return flags; } -static __inline__ void release_dma_lock(unsigned long flags) +static inline void release_dma_lock(unsigned long flags) { spin_unlock_irqrestore(&au1000_dma_spin_lock, flags); } @@ -156,48 +156,53 @@ static __inline__ void release_dma_lock(unsigned long flags) /* * Set the DMA buffer enable bits in the mode register. */ -static __inline__ void enable_dma_buffer0(unsigned int dmanr) +static inline void enable_dma_buffer0(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE0, chan->io + DMA_MODE_SET); } -static __inline__ void enable_dma_buffer1(unsigned int dmanr) + +static inline void enable_dma_buffer1(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE1, chan->io + DMA_MODE_SET); } -static __inline__ void enable_dma_buffers(unsigned int dmanr) +static inline void enable_dma_buffers(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET); } -static __inline__ void start_dma(unsigned int dmanr) +static inline void start_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; - au_writel(DMA_GO, chan->io + DMA_MODE_SET); } #define DMA_HALT_POLL 0x5000 -static __inline__ void halt_dma(unsigned int dmanr) +static inline void halt_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); int i; + if (!chan) return; - au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR); - // poll the halt bit + + /* Poll the halt bit */ for (i = 0; i < DMA_HALT_POLL; i++) if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) break; @@ -205,55 +210,57 @@ static __inline__ void halt_dma(unsigned int dmanr) printk(KERN_INFO "halt_dma: HALT poll expired!\n"); } - -static __inline__ void disable_dma(unsigned int dmanr) +static inline void disable_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; halt_dma(dmanr); - // now we can disable the buffers + /* Now we can disable the buffers */ au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR); } -static __inline__ int dma_halted(unsigned int dmanr) +static inline int dma_halted(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 1; return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0; } -/* initialize a DMA channel */ -static __inline__ void init_dma(unsigned int dmanr) +/* Initialize a DMA channel. */ +static inline void init_dma(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); u32 mode; + if (!chan) return; disable_dma(dmanr); - // set device FIFO address - au_writel(CPHYSADDR(chan->fifo_addr), - chan->io + DMA_PERIPHERAL_ADDR); + /* Set device FIFO address */ + au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR); mode = chan->mode | (chan->dev_id << DMA_DID_BIT); if (chan->irq) mode |= DMA_IE; au_writel(~mode, chan->io + DMA_MODE_CLEAR); - au_writel(mode, chan->io + DMA_MODE_SET); + au_writel(mode, chan->io + DMA_MODE_SET); } /* - * set mode for a specific DMA channel + * Set mode for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode) +static inline void set_dma_mode(unsigned int dmanr, unsigned int mode) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; /* @@ -266,36 +273,37 @@ static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode) chan->mode |= mode; } -static __inline__ unsigned int get_dma_mode(unsigned int dmanr) +static inline unsigned int get_dma_mode(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; return chan->mode; } -static __inline__ int get_dma_active_buffer(unsigned int dmanr) +static inline int get_dma_active_buffer(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return -1; return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0; } - /* - * set the device FIFO address for a specific DMA channel - only + * Set the device FIFO address for a specific DMA channel - only * applicable to GPO4 and GPO5. All the other devices have fixed * FIFO addresses. */ -static __inline__ void set_dma_fifo_addr(unsigned int dmanr, - unsigned int a) +static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; - if (chan->mode & DMA_DS) /* second bank of device ids */ + if (chan->mode & DMA_DS) /* second bank of device IDs */ return; if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05) @@ -307,16 +315,19 @@ static __inline__ void set_dma_fifo_addr(unsigned int dmanr, /* * Clear the DMA buffer done bits in the mode register. */ -static __inline__ void clear_dma_done0(unsigned int dmanr) +static inline void clear_dma_done0(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR); } -static __inline__ void clear_dma_done1(unsigned int dmanr) + +static inline void clear_dma_done1(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR); @@ -325,16 +336,17 @@ static __inline__ void clear_dma_done1(unsigned int dmanr) /* * This does nothing - not applicable to Au1000 DMA. */ -static __inline__ void set_dma_page(unsigned int dmanr, char pagenr) +static inline void set_dma_page(unsigned int dmanr, char pagenr) { } /* * Set Buffer 0 transfer address for specific DMA channel. */ -static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a) +static inline void set_dma_addr0(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(a, chan->io + DMA_BUFFER0_START); @@ -343,9 +355,10 @@ static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a) /* * Set Buffer 1 transfer address for specific DMA channel. */ -static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a) +static inline void set_dma_addr1(unsigned int dmanr, unsigned int a) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; au_writel(a, chan->io + DMA_BUFFER1_START); @@ -355,10 +368,10 @@ static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a) /* * Set Buffer 0 transfer size (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count0(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count0(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -368,10 +381,10 @@ static __inline__ void set_dma_count0(unsigned int dmanr, /* * Set Buffer 1 transfer size (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count1(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count1(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -381,10 +394,10 @@ static __inline__ void set_dma_count1(unsigned int dmanr, /* * Set both buffer transfer sizes (max 64k) for a specific DMA channel. */ -static __inline__ void set_dma_count(unsigned int dmanr, - unsigned int count) +static inline void set_dma_count(unsigned int dmanr, unsigned int count) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return; count &= DMA_COUNT_MASK; @@ -396,35 +409,36 @@ static __inline__ void set_dma_count(unsigned int dmanr, * Returns which buffer has its done bit set in the mode register. * Returns -1 if neither or both done bits set. */ -static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr) +static inline unsigned int get_dma_buffer_done(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; - - return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); + return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1); } /* * Returns the DMA channel's Buffer Done IRQ number. */ -static __inline__ int get_dma_done_irq(unsigned int dmanr) +static inline int get_dma_done_irq(unsigned int dmanr) { struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return -1; - return chan->irq; } /* * Get DMA residue count. Returns the number of _bytes_ left to transfer. */ -static __inline__ int get_dma_residue(unsigned int dmanr) +static inline int get_dma_residue(unsigned int dmanr) { int curBufCntReg, count; struct dma_chan *chan = get_dma_chan(dmanr); + if (!chan) return 0; @@ -442,4 +456,3 @@ static __inline__ int get_dma_residue(unsigned int dmanr) } #endif /* __ASM_AU1000_DMA_H */ - diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h index 298f92012e8..d8c96fda554 100644 --- a/include/asm-mips/mach-au1x00/au1000_gpio.h +++ b/include/asm-mips/mach-au1x00/au1000_gpio.h @@ -2,12 +2,12 @@ * FILE NAME au1000_gpio.h * * BRIEF MODULE DESCRIPTION - * API to Alchemy Au1000 GPIO device. + * API to Alchemy Au1xx0 GPIO device. * * Author: MontaVista Software, Inc. <source@mvista.com> - * Steve Longerbeam <stevel@mvista.com> + * Steve Longerbeam * - * Copyright 2001 MontaVista Software Inc. + * Copyright 2001, 2008 MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -37,12 +37,12 @@ #define AU1000GPIO_IOC_MAGIC 'A' -#define AU1000GPIO_IN _IOR (AU1000GPIO_IOC_MAGIC, 0, int) -#define AU1000GPIO_SET _IOW (AU1000GPIO_IOC_MAGIC, 1, int) -#define AU1000GPIO_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 2, int) -#define AU1000GPIO_OUT _IOW (AU1000GPIO_IOC_MAGIC, 3, int) -#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int) -#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int) +#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int) +#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int) +#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int) +#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int) +#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int) +#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int) #ifdef __KERNEL__ extern u32 get_au1000_avail_gpio_mask(void); diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h index c2f0466523e..40e6c489833 100644 --- a/include/asm-mips/mach-au1x00/au1550_spi.h +++ b/include/asm-mips/mach-au1x00/au1550_spi.h @@ -1,5 +1,5 @@ /* - * au1550_spi.h - au1550 psc spi controller driver - platform data struct + * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure */ #ifndef _AU1550_SPI_H_ diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h index 94713594103..1b3655090ed 100644 --- a/include/asm-mips/mach-au1x00/au1xxx.h +++ b/include/asm-mips/mach-au1x00/au1xxx.h @@ -23,10 +23,10 @@ #ifndef _AU1XXX_H_ #define _AU1XXX_H_ - #include <asm/mach-au1x00/au1000.h> -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) +#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ + defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) #include <asm/mach-db1x00/db1x00.h> #elif defined(CONFIG_MIPS_PB1550) diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index 93d507cea51..ad17d7ce516 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -28,17 +28,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first - * seen in the AU1550 part. +/* + * Specifics for the Au1xxx Descriptor-Based DMA Controller, + * first seen in the AU1550 part. */ #ifndef _AU1000_DBDMA_H_ #define _AU1000_DBDMA_H_ - #ifndef _LANGUAGE_ASSEMBLY -/* The DMA base addresses. - * The Channels are every 256 bytes (0x0100) from the channel 0 base. +/* + * The DMA base addresses. + * The channels are every 256 bytes (0x0100) from the channel 0 base. * Interrupt status/enable is bits 15:0 for channels 15 to zero. */ #define DDMA_GLOBAL_BASE 0xb4003000 @@ -51,16 +52,14 @@ typedef volatile struct dbdma_global { u32 ddma_inten; } dbdma_global_t; -/* General Configuration. -*/ +/* General Configuration. */ #define DDMA_CONFIG_AF (1 << 2) #define DDMA_CONFIG_AH (1 << 1) #define DDMA_CONFIG_AL (1 << 0) #define DDMA_THROTTLE_EN (1 << 31) -/* The structure of a DMA Channel. -*/ +/* The structure of a DMA Channel. */ typedef volatile struct au1xxx_dma_channel { u32 ddma_cfg; /* See below */ u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ @@ -69,8 +68,7 @@ typedef volatile struct au1xxx_dma_channel { u32 ddma_irq; /* If bit 0 set, interrupt pending */ u32 ddma_stat; /* See below */ u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ - /* Remainder, up to the 256 byte boundary, is reserved. - */ + /* Remainder, up to the 256 byte boundary, is reserved. */ } au1x_dma_chan_t; #define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ @@ -84,7 +82,8 @@ typedef volatile struct au1xxx_dma_channel { #define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ #define DDMA_CFG_EN (1 << 0) /* Channel enable */ -/* Always set when descriptor processing done, regardless of +/* + * Always set when descriptor processing done, regardless of * interrupt enable state. Reflected in global intstat, don't * clear this until global intstat is read/used. */ @@ -94,7 +93,8 @@ typedef volatile struct au1xxx_dma_channel { #define DDMA_STAT_V (1 << 1) /* Descriptor valid */ #define DDMA_STAT_H (1 << 0) /* Channel Halted */ -/* "Standard" DDMA Descriptor. +/* + * "Standard" DDMA Descriptor. * Must be 32-byte aligned. */ typedef volatile struct au1xxx_ddma_desc { @@ -106,8 +106,9 @@ typedef volatile struct au1xxx_ddma_desc { u32 dscr_dest1; /* See below */ u32 dscr_stat; /* completion status */ u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ - /* First 32bytes are HW specific!!! - Lets have some SW data following.. make sure its 32bytes + /* + * First 32 bytes are HW specific!!! + * Lets have some SW data following -- make sure it's 32 bytes. */ u32 sw_status; u32 sw_context; @@ -130,10 +131,9 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ -#define SW_STATUS_INUSE (1<<0) +#define SW_STATUS_INUSE (1 << 0) -/* Command 0 device IDs. -*/ +/* Command 0 device IDs. */ #ifdef CONFIG_SOC_AU1550 #define DSCR_CMD0_UART0_TX 0 #define DSCR_CMD0_UART0_RX 1 @@ -198,16 +198,15 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 -/* THis macro is used to find/create custom device types */ -#define DSCR_DEV2CUSTOM_ID(x, d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF)) -#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF) - +/* This macro is used to find/create custom device types */ +#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ + ((d) & 0xFF)) +#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) #define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) #define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) -/* Source/Destination transfer width. -*/ +/* Source/Destination transfer width. */ #define DSCR_CMD0_BYTE 0 #define DSCR_CMD0_HALFWORD 1 #define DSCR_CMD0_WORD 2 @@ -215,16 +214,14 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) #define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) -/* DDMA Descriptor Type. -*/ +/* DDMA Descriptor Type. */ #define DSCR_CMD0_STANDARD 0 #define DSCR_CMD0_LITERAL 1 #define DSCR_CMD0_CMP_BRANCH 2 #define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) -/* Status Instruction. -*/ +/* Status Instruction. */ #define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ #define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ #define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ @@ -232,23 +229,20 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) -/* Descriptor Command 1 -*/ +/* Descriptor Command 1. */ #define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ #define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ #define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ #define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ -/* Flag description. -*/ +/* Flag description. */ #define DSCR_CMD1_FL_MEM_STRIDE0 0 #define DSCR_CMD1_FL_MEM_STRIDE1 1 #define DSCR_CMD1_FL_MEM_STRIDE2 2 #define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) -/* Source1, 1-dimensional stride. -*/ +/* Source1, 1-dimensional stride. */ #define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ #define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ #define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ @@ -256,8 +250,7 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ #define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) -/* Dest1, 1-dimensional stride. -*/ +/* Dest1, 1-dimensional stride. */ #define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ #define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ #define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ @@ -279,29 +272,27 @@ typedef volatile struct au1xxx_ddma_desc { #define DSCR_SRC1_SAM(x) (((x) & 3) << 28) #define DSCR_DEST1_DAM(x) (((x) & 3) << 28) -/* The next descriptor pointer. -*/ +/* The next descriptor pointer. */ #define DSCR_NXTPTR_MASK (0x07ffffff) #define DSCR_NXTPTR(x) ((x) >> 5) #define DSCR_GET_NXTPTR(x) ((x) << 5) #define DSCR_NXTPTR_MS (1 << 27) -/* The number of DBDMA channels. -*/ +/* The number of DBDMA channels. */ #define NUM_DBDMA_CHANS 16 /* - * Ddma API definitions + * DDMA API definitions * FIXME: may not fit to this header file */ typedef struct dbdma_device_table { - u32 dev_id; - u32 dev_flags; - u32 dev_tsize; - u32 dev_devwidth; - u32 dev_physaddr; /* If FIFO */ - u32 dev_intlevel; - u32 dev_intpolarity; + u32 dev_id; + u32 dev_flags; + u32 dev_tsize; + u32 dev_devwidth; + u32 dev_physaddr; /* If FIFO */ + u32 dev_intlevel; + u32 dev_intpolarity; } dbdev_tab_t; @@ -316,44 +307,41 @@ typedef struct dbdma_chan_config { au1x_ddma_desc_t *chan_desc_base; au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; void *chan_callparam; - void (*chan_callback)(int, void *); + void (*chan_callback)(int, void *); } chan_tab_t; #define DEV_FLAGS_INUSE (1 << 0) #define DEV_FLAGS_ANYUSE (1 << 1) #define DEV_FLAGS_OUT (1 << 2) #define DEV_FLAGS_IN (1 << 3) -#define DEV_FLAGS_BURSTABLE (1 << 4) +#define DEV_FLAGS_BURSTABLE (1 << 4) #define DEV_FLAGS_SYNC (1 << 5) -/* end Ddma API definitions */ +/* end DDMA API definitions */ -/* External functions for drivers to use. -*/ -/* Use this to allocate a dbdma channel. The device ids are one of the - * DSCR_CMD0 devices IDs, which is usually redefined to a more - * meaningful name. The 'callback' is called during dma completion +/* + * External functions for drivers to use. + * Use this to allocate a DBDMA channel. The device IDs are one of + * the DSCR_CMD0 devices IDs, which is usually redefined to a more + * meaningful name. The 'callback' is called during DMA completion * interrupt. */ extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, - void (*callback)(int, void *), void *callparam); + void (*callback)(int, void *), + void *callparam); #define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS -/* Set the device width of a in/out fifo. -*/ +/* Set the device width of an in/out FIFO. */ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); -/* Allocate a ring of descriptors for dbdma. -*/ +/* Allocate a ring of descriptors for DBDMA. */ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); -/* Put buffers on source/destination descriptors. -*/ +/* Put buffers on source/destination descriptors. */ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); -/* Get a buffer from the destination descriptor. -*/ +/* Get a buffer from the destination descriptor. */ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); void au1xxx_dbdma_stop(u32 chanid); @@ -364,29 +352,34 @@ u32 au1xxx_get_dma_residue(u32 chanid); void au1xxx_dbdma_chan_free(u32 chanid); void au1xxx_dbdma_dump(u32 chanid); -u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ); +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); -u32 au1xxx_ddma_add_device( dbdev_tab_t *dev ); -void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); +u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); /* - Some compatibilty macros -- - Needed to make changes to API without breaking existing drivers -*/ -#define au1xxx_dbdma_put_source(chanid, buf, nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) -#define put_source_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) - - -#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) -#define put_dest_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) + * Some compatibilty macros -- needed to make changes to API + * without breaking existing drivers. + */ +#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) +#define put_source_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) + +#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ + _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) +#define put_dest_flags(chanid, buf, nbytes, flags) \ + au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) /* * Flags for the put_source/put_dest functions. */ -#define DDMA_FLAGS_IE (1<<0) -#define DDMA_FLAGS_NOIE (1<<1) +#define DDMA_FLAGS_IE (1 << 0) +#define DDMA_FLAGS_NOIE (1 << 1) #endif /* _LANGUAGE_ASSEMBLY */ #endif /* _AU1000_DBDMA_H_ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index b493a5e46c6..60638b8969b 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -31,167 +31,164 @@ */ #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - #define DMA_WAIT_TIMEOUT 100 - #define NUM_DESCRIPTORS PRD_ENTRIES +#define DMA_WAIT_TIMEOUT 100 +#define NUM_DESCRIPTORS PRD_ENTRIES #else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ - #define NUM_DESCRIPTORS 2 +#define NUM_DESCRIPTORS 2 #endif #ifndef AU1XXX_ATA_RQSIZE - #define AU1XXX_ATA_RQSIZE 128 +#define AU1XXX_ATA_RQSIZE 128 #endif /* Disable Burstable-Support for DBDMA */ #ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 +#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 #endif #ifdef CONFIG_PM /* -* This will enable the device to be powered up when write() or read() -* is called. If this is not defined, the driver will return -EBUSY. -*/ + * This will enable the device to be powered up when write() or read() + * is called. If this is not defined, the driver will return -EBUSY. + */ #define WAKE_ON_ACCESS 1 -typedef struct -{ - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* USed to signaling device is stopped */ +typedef struct { + spinlock_t lock; /* Used to block on state transitions */ + au1xxx_power_dev_t *dev; /* Power Managers device structure */ + unsigned stopped; /* Used to signal device is stopped */ } pm_state; #endif - -typedef struct -{ - u32 tx_dev_id, rx_dev_id, target_dev_id; - u32 tx_chan, rx_chan; - void *tx_desc_head, *rx_desc_head; - ide_hwif_t *hwif; +typedef struct { + u32 tx_dev_id, rx_dev_id, target_dev_id; + u32 tx_chan, rx_chan; + void *tx_desc_head, *rx_desc_head; + ide_hwif_t *hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - ide_drive_t *drive; - struct dbdma_cmd *dma_table_cpu; - dma_addr_t dma_table_dma; + ide_drive_t *drive; + struct dbdma_cmd *dma_table_cpu; + dma_addr_t dma_table_dma; #endif int irq; u32 regbase; #ifdef CONFIG_PM - pm_state pm; + pm_state pm; #endif } _auide_hwif; -/******************************************************************************* -* PIO Mode timing calculation : * -* * -* Static Bus Spec ATA Spec * -* Tcsoe = t1 * -* Toecs = t9 * -* Twcs = t9 * -* Tcsh = t2i | t2 * -* Tcsoff = t2i | t2 * -* Twp = t2 * -* Tcsw = t1 * -* Tpm = 0 * -* Ta = t1+t2 * -*******************************************************************************/ +/******************************************************************************/ +/* PIO Mode timing calculation : */ +/* */ +/* Static Bus Spec ATA Spec */ +/* Tcsoe = t1 */ +/* Toecs = t9 */ +/* Twcs = t9 */ +/* Tcsh = t2i | t2 */ +/* Tcsoff = t2i | t2 */ +/* Twp = t2 */ +/* Tcsw = t1 */ +/* Tpm = 0 */ +/* Ta = t1+t2 */ +/******************************************************************************/ -#define TCSOE_MASK (0x07<<29) -#define TOECS_MASK (0x07<<26) -#define TWCS_MASK (0x07<<28) -#define TCSH_MASK (0x0F<<24) -#define TCSOFF_MASK (0x07<<20) -#define TWP_MASK (0x3F<<14) -#define TCSW_MASK (0x0F<<10) -#define TPM_MASK (0x0F<<6) -#define TA_MASK (0x3F<<0) -#define TS_MASK (1<<8) +#define TCSOE_MASK (0x07 << 29) +#define TOECS_MASK (0x07 << 26) +#define TWCS_MASK (0x07 << 28) +#define TCSH_MASK (0x0F << 24) +#define TCSOFF_MASK (0x07 << 20) +#define TWP_MASK (0x3F << 14) +#define TCSW_MASK (0x0F << 10) +#define TPM_MASK (0x0F << 6) +#define TA_MASK (0x3F << 0) +#define TS_MASK (1 << 8) /* Timing parameters PIO mode 0 */ -#define SBC_IDE_PIO0_TCSOE (0x04<<29) -#define SBC_IDE_PIO0_TOECS (0x01<<26) -#define SBC_IDE_PIO0_TWCS (0x02<<28) -#define SBC_IDE_PIO0_TCSH (0x08<<24) -#define SBC_IDE_PIO0_TCSOFF (0x07<<20) -#define SBC_IDE_PIO0_TWP (0x10<<14) -#define SBC_IDE_PIO0_TCSW (0x04<<10) -#define SBC_IDE_PIO0_TPM (0x0<<6) -#define SBC_IDE_PIO0_TA (0x15<<0) +#define SBC_IDE_PIO0_TCSOE (0x04 << 29) +#define SBC_IDE_PIO0_TOECS (0x01 << 26) +#define SBC_IDE_PIO0_TWCS (0x02 << 28) +#define SBC_IDE_PIO0_TCSH (0x08 << 24) +#define SBC_IDE_PIO0_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO0_TWP (0x10 << 14) +#define SBC_IDE_PIO0_TCSW (0x04 << 10) +#define SBC_IDE_PIO0_TPM (0x00 << 6) +#define SBC_IDE_PIO0_TA (0x15 << 0) /* Timing parameters PIO mode 1 */ -#define SBC_IDE_PIO1_TCSOE (0x03<<29) -#define SBC_IDE_PIO1_TOECS (0x01<<26) -#define SBC_IDE_PIO1_TWCS (0x01<<28) -#define SBC_IDE_PIO1_TCSH (0x06<<24) -#define SBC_IDE_PIO1_TCSOFF (0x06<<20) -#define SBC_IDE_PIO1_TWP (0x08<<14) -#define SBC_IDE_PIO1_TCSW (0x03<<10) -#define SBC_IDE_PIO1_TPM (0x00<<6) -#define SBC_IDE_PIO1_TA (0x0B<<0) +#define SBC_IDE_PIO1_TCSOE (0x03 << 29) +#define SBC_IDE_PIO1_TOECS (0x01 << 26) +#define SBC_IDE_PIO1_TWCS (0x01 << 28) +#define SBC_IDE_PIO1_TCSH (0x06 << 24) +#define SBC_IDE_PIO1_TCSOFF (0x06 << 20) +#define SBC_IDE_PIO1_TWP (0x08 << 14) +#define SBC_IDE_PIO1_TCSW (0x03 << 10) +#define SBC_IDE_PIO1_TPM (0x00 << 6) +#define SBC_IDE_PIO1_TA (0x0B << 0) /* Timing parameters PIO mode 2 */ -#define SBC_IDE_PIO2_TCSOE (0x05<<29) -#define SBC_IDE_PIO2_TOECS (0x01<<26) -#define SBC_IDE_PIO2_TWCS (0x01<<28) -#define SBC_IDE_PIO2_TCSH (0x07<<24) -#define SBC_IDE_PIO2_TCSOFF (0x07<<20) -#define SBC_IDE_PIO2_TWP (0x1F<<14) -#define SBC_IDE_PIO2_TCSW (0x05<<10) -#define SBC_IDE_PIO2_TPM (0x00<<6) -#define SBC_IDE_PIO2_TA (0x22<<0) +#define SBC_IDE_PIO2_TCSOE (0x05 << 29) +#define SBC_IDE_PIO2_TOECS (0x01 << 26) +#define SBC_IDE_PIO2_TWCS (0x01 << 28) +#define SBC_IDE_PIO2_TCSH (0x07 << 24) +#define SBC_IDE_PIO2_TCSOFF (0x07 << 20) +#define SBC_IDE_PIO2_TWP (0x1F << 14) +#define SBC_IDE_PIO2_TCSW (0x05 << 10) +#define SBC_IDE_PIO2_TPM (0x00 << 6) +#define SBC_IDE_PIO2_TA (0x22 << 0) /* Timing parameters PIO mode 3 */ -#define SBC_IDE_PIO3_TCSOE (0x05<<29) -#define SBC_IDE_PIO3_TOECS (0x01<<26) -#define SBC_IDE_PIO3_TWCS (0x01<<28) -#define SBC_IDE_PIO3_TCSH (0x0D<<24) -#define SBC_IDE_PIO3_TCSOFF (0x0D<<20) -#define SBC_IDE_PIO3_TWP (0x15<<14) -#define SBC_IDE_PIO3_TCSW (0x05<<10) -#define SBC_IDE_PIO3_TPM (0x00<<6) -#define SBC_IDE_PIO3_TA (0x1A<<0) +#define SBC_IDE_PIO3_TCSOE (0x05 << 29) +#define SBC_IDE_PIO3_TOECS (0x01 << 26) +#define SBC_IDE_PIO3_TWCS (0x01 << 28) +#define SBC_IDE_PIO3_TCSH (0x0D << 24) +#define SBC_IDE_PIO3_TCSOFF (0x0D << 20) +#define SBC_IDE_PIO3_TWP (0x15 << 14) +#define SBC_IDE_PIO3_TCSW (0x05 << 10) +#define SBC_IDE_PIO3_TPM (0x00 << 6) +#define SBC_IDE_PIO3_TA (0x1A << 0) /* Timing parameters PIO mode 4 */ -#define SBC_IDE_PIO4_TCSOE (0x04<<29) -#define SBC_IDE_PIO4_TOECS (0x01<<26) -#define SBC_IDE_PIO4_TWCS (0x01<<28) -#define SBC_IDE_PIO4_TCSH (0x04<<24) -#define SBC_IDE_PIO4_TCSOFF (0x04<<20) -#define SBC_IDE_PIO4_TWP (0x0D<<14) -#define SBC_IDE_PIO4_TCSW (0x03<<10) -#define SBC_IDE_PIO4_TPM (0x00<<6) -#define SBC_IDE_PIO4_TA (0x12<<0) +#define SBC_IDE_PIO4_TCSOE (0x04 << 29) +#define SBC_IDE_PIO4_TOECS (0x01 << 26) +#define SBC_IDE_PIO4_TWCS (0x01 << 28) +#define SBC_IDE_PIO4_TCSH (0x04 << 24) +#define SBC_IDE_PIO4_TCSOFF (0x04 << 20) +#define SBC_IDE_PIO4_TWP (0x0D << 14) +#define SBC_IDE_PIO4_TCSW (0x03 << 10) +#define SBC_IDE_PIO4_TPM (0x00 << 6) +#define SBC_IDE_PIO4_TA (0x12 << 0) /* Timing parameters MDMA mode 0 */ -#define SBC_IDE_MDMA0_TCSOE (0x03<<29) -#define SBC_IDE_MDMA0_TOECS (0x01<<26) -#define SBC_IDE_MDMA0_TWCS (0x01<<28) -#define SBC_IDE_MDMA0_TCSH (0x07<<24) -#define SBC_IDE_MDMA0_TCSOFF (0x07<<20) -#define SBC_IDE_MDMA0_TWP (0x0C<<14) -#define SBC_IDE_MDMA0_TCSW (0x03<<10) -#define SBC_IDE_MDMA0_TPM (0x00<<6) -#define SBC_IDE_MDMA0_TA (0x0F<<0) +#define SBC_IDE_MDMA0_TCSOE (0x03 << 29) +#define SBC_IDE_MDMA0_TOECS (0x01 << 26) +#define SBC_IDE_MDMA0_TWCS (0x01 << 28) +#define SBC_IDE_MDMA0_TCSH (0x07 << 24) +#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20) +#define SBC_IDE_MDMA0_TWP (0x0C << 14) +#define SBC_IDE_MDMA0_TCSW (0x03 << 10) +#define SBC_IDE_MDMA0_TPM (0x00 << 6) +#define SBC_IDE_MDMA0_TA (0x0F << 0) /* Timing parameters MDMA mode 1 */ -#define SBC_IDE_MDMA1_TCSOE (0x05<<29) -#define SBC_IDE_MDMA1_TOECS (0x01<<26) -#define SBC_IDE_MDMA1_TWCS (0x01<<28) -#define SBC_IDE_MDMA1_TCSH (0x05<<24) -#define SBC_IDE_MDMA1_TCSOFF (0x05<<20) -#define SBC_IDE_MDMA1_TWP (0x0F<<14) -#define SBC_IDE_MDMA1_TCSW (0x05<<10) -#define SBC_IDE_MDMA1_TPM (0x00<<6) -#define SBC_IDE_MDMA1_TA (0x15<<0) +#define SBC_IDE_MDMA1_TCSOE (0x05 << 29) +#define SBC_IDE_MDMA1_TOECS (0x01 << 26) +#define SBC_IDE_MDMA1_TWCS (0x01 << 28) +#define SBC_IDE_MDMA1_TCSH (0x05 << 24) +#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20) +#define SBC_IDE_MDMA1_TWP (0x0F << 14) +#define SBC_IDE_MDMA1_TCSW (0x05 << 10) +#define SBC_IDE_MDMA1_TPM (0x00 << 6) +#define SBC_IDE_MDMA1_TA (0x15 << 0) /* Timing parameters MDMA mode 2 */ -#define SBC_IDE_MDMA2_TCSOE (0x04<<29) -#define SBC_IDE_MDMA2_TOECS (0x01<<26) -#define SBC_IDE_MDMA2_TWCS (0x01<<28) -#define SBC_IDE_MDMA2_TCSH (0x04<<24) -#define SBC_IDE_MDMA2_TCSOFF (0x04<<20) -#define SBC_IDE_MDMA2_TWP (0x0D<<14) -#define SBC_IDE_MDMA2_TCSW (0x04<<10) -#define SBC_IDE_MDMA2_TPM (0x00<<6) -#define SBC_IDE_MDMA2_TA (0x12<<0) +#define SBC_IDE_MDMA2_TCSOE (0x04 << 29) +#define SBC_IDE_MDMA2_TOECS (0x01 << 26) +#define SBC_IDE_MDMA2_TWCS (0x01 << 28) +#define SBC_IDE_MDMA2_TCSH (0x04 << 24) +#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20) +#define SBC_IDE_MDMA2_TWP (0x0D << 14) +#define SBC_IDE_MDMA2_TCSW (0x04 << 10) +#define SBC_IDE_MDMA2_TPM (0x00 << 6) +#define SBC_IDE_MDMA2_TA (0x12 << 0) #define SBC_IDE_TIMING(mode) \ - SBC_IDE_##mode##_TWCS | \ - SBC_IDE_##mode##_TCSH | \ - SBC_IDE_##mode##_TCSOFF | \ - SBC_IDE_##mode##_TWP | \ - SBC_IDE_##mode##_TCSW | \ - SBC_IDE_##mode##_TPM | \ - SBC_IDE_##mode##_TA + (SBC_IDE_##mode##_TWCS | \ + SBC_IDE_##mode##_TCSH | \ + SBC_IDE_##mode##_TCSOFF | \ + SBC_IDE_##mode##_TWP | \ + SBC_IDE_##mode##_TCSW | \ + SBC_IDE_##mode##_TPM | \ + SBC_IDE_##mode##_TA) diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h index 1bd4e27caf6..dae4eca2417 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_psc.h +++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h @@ -33,7 +33,6 @@ #ifndef _AU1000_PSC_H_ #define _AU1000_PSC_H_ - /* The PSC base addresses. */ #ifdef CONFIG_SOC_AU1550 #define PSC0_BASE_ADDR 0xb1a00000 @@ -47,8 +46,8 @@ #define PSC1_BASE_ADDR 0xb1b00000 #endif -/* The PSC select and control registers are common to - * all protocols. +/* + * The PSC select and control registers are common to all protocols. */ #define PSC_SEL_OFFSET 0x00000000 #define PSC_CTRL_OFFSET 0x00000004 @@ -59,18 +58,17 @@ #define PSC_SEL_CLK_SERCLK (2 << 4) #define PSC_SEL_PS_MASK 0x00000007 -#define PSC_SEL_PS_DISABLED (0) -#define PSC_SEL_PS_SPIMODE (2) -#define PSC_SEL_PS_I2SMODE (3) -#define PSC_SEL_PS_AC97MODE (4) -#define PSC_SEL_PS_SMBUSMODE (5) - -#define PSC_CTRL_DISABLE (0) -#define PSC_CTRL_SUSPEND (2) -#define PSC_CTRL_ENABLE (3) - -/* AC97 Registers. -*/ +#define PSC_SEL_PS_DISABLED 0 +#define PSC_SEL_PS_SPIMODE 2 +#define PSC_SEL_PS_I2SMODE 3 +#define PSC_SEL_PS_AC97MODE 4 +#define PSC_SEL_PS_SMBUSMODE 5 + +#define PSC_CTRL_DISABLE 0 +#define PSC_CTRL_SUSPEND 2 +#define PSC_CTRL_ENABLE 3 + +/* AC97 Registers. */ #define PSC_AC97CFG_OFFSET 0x00000008 #define PSC_AC97MSK_OFFSET 0x0000000c #define PSC_AC97PCR_OFFSET 0x00000010 @@ -95,8 +93,7 @@ #define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET) #define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET) -/* AC97 Config Register. -*/ +/* AC97 Config Register. */ #define PSC_AC97CFG_RT_MASK (3 << 30) #define PSC_AC97CFG_RT_FIFO1 (0 << 30) #define PSC_AC97CFG_RT_FIFO2 (1 << 30) @@ -118,20 +115,19 @@ #define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1) #define PSC_AC97CFG_GE_ENABLE (1) -/* Enable slots 3-12. -*/ +/* Enable slots 3-12. */ #define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11)) #define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1)) -/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. +/* + * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately. * The only sensible numbers are 7, 9, or possibly 11. Nah, just do the * arithmetic in the macro. */ -#define PSC_AC97CFG_SET_LEN(x) (((((x)-2)/2) & 0xf) << 21) +#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21) #define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2) -/* AC97 Mask Register. -*/ +/* AC97 Mask Register. */ #define PSC_AC97MSK_GR (1 << 25) #define PSC_AC97MSK_CD (1 << 24) #define PSC_AC97MSK_RR (1 << 13) @@ -148,8 +144,7 @@ PSC_AC97MSK_TO | PSC_AC97MSK_TU | \ PSC_AC97MSK_RD | PSC_AC97MSK_TD) -/* AC97 Protocol Control Register. -*/ +/* AC97 Protocol Control Register. */ #define PSC_AC97PCR_RC (1 << 6) #define PSC_AC97PCR_RP (1 << 5) #define PSC_AC97PCR_RS (1 << 4) @@ -157,8 +152,7 @@ #define PSC_AC97PCR_TP (1 << 1) #define PSC_AC97PCR_TS (1 << 0) -/* AC97 Status register (read only). -*/ +/* AC97 Status register (read only). */ #define PSC_AC97STAT_CB (1 << 26) #define PSC_AC97STAT_CP (1 << 25) #define PSC_AC97STAT_CR (1 << 24) @@ -174,8 +168,7 @@ #define PSC_AC97STAT_DR (1 << 1) #define PSC_AC97STAT_SR (1 << 0) -/* AC97 Event Register. -*/ +/* AC97 Event Register. */ #define PSC_AC97EVNT_GR (1 << 25) #define PSC_AC97EVNT_CD (1 << 24) #define PSC_AC97EVNT_RR (1 << 13) @@ -187,22 +180,18 @@ #define PSC_AC97EVNT_RD (1 << 5) #define PSC_AC97EVNT_TD (1 << 4) -/* CODEC Command Register. -*/ +/* CODEC Command Register. */ #define PSC_AC97CDC_RD (1 << 25) #define PSC_AC97CDC_ID_MASK (3 << 23) #define PSC_AC97CDC_INDX_MASK (0x7f << 16) -#define PSC_AC97CDC_ID(x) (((x) & 0x3) << 23) +#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23) #define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16) -/* AC97 Reset Control Register. -*/ +/* AC97 Reset Control Register. */ #define PSC_AC97RST_RST (1 << 1) #define PSC_AC97RST_SNC (1 << 0) - -/* PSC in I2S Mode. -*/ +/* PSC in I2S Mode. */ typedef struct psc_i2s { u32 psc_sel; u32 psc_ctrl; @@ -215,8 +204,7 @@ typedef struct psc_i2s { u32 psc_i2sudf; } psc_i2s_t; -/* I2S Config Register. -*/ +/* I2S Config Register. */ #define PSC_I2SCFG_RT_MASK (3 << 30) #define PSC_I2SCFG_RT_FIFO1 (0 << 30) #define PSC_I2SCFG_RT_FIFO2 (1 << 30) @@ -247,8 +235,7 @@ typedef struct psc_i2s { #define PSC_I2SCFG_MLJ (1 << 10) #define PSC_I2SCFG_XM (1 << 9) -/* The word length equation is simply LEN+1. - */ +/* The word length equation is simply LEN+1. */ #define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4) #define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1) @@ -256,8 +243,7 @@ typedef struct psc_i2s { #define PSC_I2SCFG_MLF (1 << 1) #define PSC_I2SCFG_MS (1 << 0) -/* I2S Mask Register. -*/ +/* I2S Mask Register. */ #define PSC_I2SMSK_RR (1 << 13) #define PSC_I2SMSK_RO (1 << 12) #define PSC_I2SMSK_RU (1 << 11) @@ -271,8 +257,7 @@ typedef struct psc_i2s { PSC_I2SMSK_TO | PSC_I2SMSK_TU | \ PSC_I2SMSK_RD | PSC_I2SMSK_TD) -/* I2S Protocol Control Register. -*/ +/* I2S Protocol Control Register. */ #define PSC_I2SPCR_RC (1 << 6) #define PSC_I2SPCR_RP (1 << 5) #define PSC_I2SPCR_RS (1 << 4) @@ -280,8 +265,7 @@ typedef struct psc_i2s { #define PSC_I2SPCR_TP (1 << 1) #define PSC_I2SPCR_TS (1 << 0) -/* I2S Status register (read only). -*/ +/* I2S Status register (read only). */ #define PSC_I2SSTAT_RF (1 << 13) #define PSC_I2SSTAT_RE (1 << 12) #define PSC_I2SSTAT_RR (1 << 11) @@ -294,8 +278,7 @@ typedef struct psc_i2s { #define PSC_I2SSTAT_DR (1 << 1) #define PSC_I2SSTAT_SR (1 << 0) -/* I2S Event Register. -*/ +/* I2S Event Register. */ #define PSC_I2SEVNT_RR (1 << 13) #define PSC_I2SEVNT_RO (1 << 12) #define PSC_I2SEVNT_RU (1 << 11) @@ -305,8 +288,7 @@ typedef struct psc_i2s { #define PSC_I2SEVNT_RD (1 << 5) #define PSC_I2SEVNT_TD (1 << 4) -/* PSC in SPI Mode. -*/ +/* PSC in SPI Mode. */ typedef struct psc_spi { u32 psc_sel; u32 psc_ctrl; @@ -318,8 +300,7 @@ typedef struct psc_spi { u32 psc_spitxrx; } psc_spi_t; -/* SPI Config Register. -*/ +/* SPI Config Register. */ #define PSC_SPICFG_RT_MASK (3 << 30) #define PSC_SPICFG_RT_FIFO1 (0 << 30) #define PSC_SPICFG_RT_FIFO2 (1 << 30) @@ -355,8 +336,7 @@ typedef struct psc_spi { #define PSC_SPICFG_MLF (1 << 1) #define PSC_SPICFG_MO (1 << 0) -/* SPI Mask Register. -*/ +/* SPI Mask Register. */ #define PSC_SPIMSK_MM (1 << 16) #define PSC_SPIMSK_RR (1 << 13) #define PSC_SPIMSK_RO (1 << 12) @@ -371,16 +351,14 @@ typedef struct psc_spi { PSC_SPIMSK_TU | PSC_SPIMSK_SD | \ PSC_SPIMSK_MD) -/* SPI Protocol Control Register. -*/ +/* SPI Protocol Control Register. */ #define PSC_SPIPCR_RC (1 << 6) #define PSC_SPIPCR_SP (1 << 5) #define PSC_SPIPCR_SS (1 << 4) #define PSC_SPIPCR_TC (1 << 2) #define PSC_SPIPCR_MS (1 << 0) -/* SPI Status register (read only). -*/ +/* SPI Status register (read only). */ #define PSC_SPISTAT_RF (1 << 13) #define PSC_SPISTAT_RE (1 << 12) #define PSC_SPISTAT_RR (1 << 11) @@ -393,8 +371,7 @@ typedef struct psc_spi { #define PSC_SPISTAT_DR (1 << 1) #define PSC_SPISTAT_SR (1 << 0) -/* SPI Event Register. -*/ +/* SPI Event Register. */ #define PSC_SPIEVNT_MM (1 << 16) #define PSC_SPIEVNT_RR (1 << 13) #define PSC_SPIEVNT_RO (1 << 12) @@ -405,13 +382,11 @@ typedef struct psc_spi { #define PSC_SPIEVNT_SD (1 << 5) #define PSC_SPIEVNT_MD (1 << 4) -/* Transmit register control. -*/ +/* Transmit register control. */ #define PSC_SPITXRX_LC (1 << 29) #define PSC_SPITXRX_SR (1 << 28) -/* PSC in SMBus (I2C) Mode. -*/ +/* PSC in SMBus (I2C) Mode. */ typedef struct psc_smb { u32 psc_sel; u32 psc_ctrl; @@ -424,8 +399,7 @@ typedef struct psc_smb { u32 psc_smbtmr; } psc_smb_t; -/* SMBus Config Register. -*/ +/* SMBus Config Register. */ #define PSC_SMBCFG_RT_MASK (3 << 30) #define PSC_SMBCFG_RT_FIFO1 (0 << 30) #define PSC_SMBCFG_RT_FIFO2 (1 << 30) @@ -452,8 +426,7 @@ typedef struct psc_smb { #define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1) -/* SMBus Mask Register. -*/ +/* SMBus Mask Register. */ #define PSC_SMBMSK_DN (1 << 30) #define PSC_SMBMSK_AN (1 << 29) #define PSC_SMBMSK_AL (1 << 28) @@ -471,13 +444,11 @@ typedef struct psc_smb { PSC_SMBMSK_TU | PSC_SMBMSK_SD | \ PSC_SMBMSK_MD) -/* SMBus Protocol Control Register. -*/ +/* SMBus Protocol Control Register. */ #define PSC_SMBPCR_DC (1 << 2) #define PSC_SMBPCR_MS (1 << 0) -/* SMBus Status register (read only). -*/ +/* SMBus Status register (read only). */ #define PSC_SMBSTAT_BB (1 << 28) #define PSC_SMBSTAT_RF (1 << 13) #define PSC_SMBSTAT_RE (1 << 12) @@ -491,8 +462,7 @@ typedef struct psc_smb { #define PSC_SMBSTAT_DR (1 << 1) #define PSC_SMBSTAT_SR (1 << 0) -/* SMBus Event Register. -*/ +/* SMBus Event Register. */ #define PSC_SMBEVNT_DN (1 << 30) #define PSC_SMBEVNT_AN (1 << 29) #define PSC_SMBEVNT_AL (1 << 28) @@ -510,15 +480,13 @@ typedef struct psc_smb { PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \ PSC_SMBEVNT_MD) -/* Transmit register control. -*/ +/* Transmit register control. */ #define PSC_SMBTXRX_RSR (1 << 28) #define PSC_SMBTXRX_STP (1 << 29) -#define PSC_SMBTXRX_DATAMASK (0xff) +#define PSC_SMBTXRX_DATAMASK 0xff -/* SMBus protocol timers register. -*/ -#define PSC_SMBTMR_SET_TH(x) (((x) & 0x3) << 30) +/* SMBus protocol timers register. */ +#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30) #define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25) #define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20) #define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15) @@ -526,5 +494,4 @@ typedef struct psc_smb { #define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5) #define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0) - #endif /* _AU1000_PSC_H_ */ diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index eedd048a726..27f26102b1b 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -1,6 +1,6 @@ /* - * AMD Alchemy DB1200 Referrence Board - * Board Registers defines. + * AMD Alchemy DBAu1200 Reference Board + * Board register defines. * * ######################################################################## * @@ -27,26 +27,25 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC'97 and I2S are muxed on the DBAu1200 board. + * Refer to board documentation. */ -#define AC97_PSC_BASE PSC1_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xB9800000 +#define BCSR_KSEG1_ADDR 0xB9800000 typedef volatile struct { @@ -102,9 +101,9 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -122,8 +121,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 #define BCSR_RESETS_TV 0x0010 -/* not resets but in the same register */ -#define BCSR_RESETS_PWMR1mUX 0x0800 +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 @@ -160,7 +159,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -179,10 +178,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define NAND_PHYS_ADDR 0x20000000 /* - * External Interrupts for Pb1200 as of 8/6/2004. + * External Interrupts for DBAu1200 as of 8/6/2004. * Bit positions in the CPLD registers can be calculated by taking * the interrupt define and subtracting the DB1200_INT_BEGIN value. * @@ -211,23 +210,21 @@ enum external_pb1200_ints { }; -/* For drivers/pcmcia/au1000_db1x00.c */ - -/* PCMCIA Db1x00 specific defines */ - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* + * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +#define BOARD_PC0_INT DB1200_PC0_INT +#define BOARD_PC1_INT DB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) -/* Nand chip select */ +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_DB1200_H */ - diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index e7a88ba3583..612ae90dbcb 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -1,9 +1,8 @@ /* - * AMD Alchemy DB1x00 Reference Boards + * AMD Alchemy DBAu1x00 Reference Boards * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) * * ######################################################################## @@ -32,26 +31,26 @@ #ifdef CONFIG_MIPS_DB1550 -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xAF000000 -#define NAND_PHYS_ADDR 0x20000000 +#define BCSR_KSEG1_ADDR 0xAF000000 +#define NAND_PHYS_ADDR 0x20000000 #else #define BCSR_KSEG1_ADDR 0xAE000000 #endif /* - * Overlay data structure of the Db1x00 board registers. - * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx + * Overlay data structure of the DBAu1x00 board registers. + * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. */ typedef volatile struct { @@ -138,18 +137,19 @@ typedef volatile struct #define BCSR_SWRESET_RESET 0x0080 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA DBAu1x00 specific defines */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ #define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -/* SD controller macros */ /* - * Detect card. + * SD controller macros */ + +/* Detect card. */ #define mmc_card_inserted(_n_, _res_) \ do { \ BCSR * const bcsr = (BCSR *)0xAE000000; \ @@ -176,10 +176,10 @@ typedef volatile struct unsigned long mmc_pwr, mmc_wp, board_specific; \ if ((_n_)) { \ mmc_pwr = BCSR_BOARD_SD1_PWR; \ - mmc_wp = BCSR_BOARD_SD1_WP; \ + mmc_wp = BCSR_BOARD_SD1_WP; \ } else { \ mmc_pwr = BCSR_BOARD_SD0_PWR; \ - mmc_wp = BCSR_BOARD_SD0_WP; \ + mmc_wp = BCSR_BOARD_SD0_WP; \ } \ board_specific = au_readl((unsigned long)(&bcsr->specific)); \ if (!(board_specific & mmc_wp)) {/* low means card present */ \ @@ -190,17 +190,19 @@ typedef volatile struct } while (0) -/* NAND defines */ -/* Timing values as described in databook, * ns value stripped of +/* + * NAND defines + * + * Timing values as described in databook, * ns value stripped of the * lower 2 bits. - * These defines are here rather than an SOC1550 generic file because + * These defines are here rather than an Au1550 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -208,16 +210,15 @@ typedef volatile struct #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) -#define NAND_CS 1 +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) +#define NAND_CS 1 -/* should be done by yamon */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_DB1X00_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h index b52e0e7ee3f..6d1ff9060e4 100644 --- a/include/asm-mips/mach-pb1x00/pb1000.h +++ b/include/asm-mips/mach-pb1x00/pb1000.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1000 Referrence Board + * Alchemy Semi Pb1000 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -28,145 +27,61 @@ #define __ASM_PB1000_H /* PCMCIA PB1000 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -#define PB1000_PCR 0xBE000000 -# define PCR_SLOT_0_VPP0 (1<<0) -# define PCR_SLOT_0_VPP1 (1<<1) -# define PCR_SLOT_0_VCC0 (1<<2) -# define PCR_SLOT_0_VCC1 (1<<3) -# define PCR_SLOT_0_RST (1<<4) - -# define PCR_SLOT_1_VPP0 (1<<8) -# define PCR_SLOT_1_VPP1 (1<<9) -# define PCR_SLOT_1_VCC0 (1<<10) -# define PCR_SLOT_1_VCC1 (1<<11) -# define PCR_SLOT_1_RST (1<<12) - -#define PB1000_MDR 0xBE000004 -# define MDR_PI (1<<5) /* pcmcia int latch */ -# define MDR_EPI (1<<14) /* enable pcmcia int */ -# define MDR_CPI (1<<15) /* clear pcmcia int */ - -#define PB1000_ACR1 0xBE000008 -# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */ -# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */ -# define ACR1_SLOT_0_READY (1<<2) /* ready */ -# define ACR1_SLOT_0_STATUS (1<<3) /* status change */ -# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */ -# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */ -# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */ -# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */ -# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */ -# define ACR1_SLOT_1_READY (1<<10) /* ready */ -# define ACR1_SLOT_1_STATUS (1<<11) /* status change */ -# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */ -# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */ -# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */ - -#define CPLD_AUX0 0xBE00000C -#define CPLD_AUX1 0xBE000010 -#define CPLD_AUX2 0xBE000014 +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) + +#define PB1000_PCR 0xBE000000 +# define PCR_SLOT_0_VPP0 (1 << 0) +# define PCR_SLOT_0_VPP1 (1 << 1) +# define PCR_SLOT_0_VCC0 (1 << 2) +# define PCR_SLOT_0_VCC1 (1 << 3) +# define PCR_SLOT_0_RST (1 << 4) +# define PCR_SLOT_1_VPP0 (1 << 8) +# define PCR_SLOT_1_VPP1 (1 << 9) +# define PCR_SLOT_1_VCC0 (1 << 10) +# define PCR_SLOT_1_VCC1 (1 << 11) +# define PCR_SLOT_1_RST (1 << 12) + +#define PB1000_MDR 0xBE000004 +# define MDR_PI (1 << 5) /* PCMCIA int latch */ +# define MDR_EPI (1 << 14) /* enable PCMCIA int */ +# define MDR_CPI (1 << 15) /* clear PCMCIA int */ + +#define PB1000_ACR1 0xBE000008 +# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */ +# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */ +# define ACR1_SLOT_0_READY (1 << 2) /* ready */ +# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */ +# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */ +# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */ +# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */ +# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */ +# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */ +# define ACR1_SLOT_1_READY (1 << 10) /* ready */ +# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */ +# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */ +# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */ +# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */ + +#define CPLD_AUX0 0xBE00000C +#define CPLD_AUX1 0xBE000010 +#define CPLD_AUX2 0xBE000014 /* Voltage levels */ /* VPPEN1 - VPPEN0 */ -#define VPP_GND ((0<<1) | (0<<0)) -#define VPP_5V ((1<<1) | (0<<0)) -#define VPP_3V ((0<<1) | (1<<0)) -#define VPP_12V ((0<<1) | (1<<0)) -#define VPP_HIZ ((1<<1) | (1<<0)) +#define VPP_GND ((0 << 1) | (0 << 0)) +#define VPP_5V ((1 << 1) | (0 << 0)) +#define VPP_3V ((0 << 1) | (1 << 0)) +#define VPP_12V ((0 << 1) | (1 << 0)) +#define VPP_HIZ ((1 << 1) | (1 << 0)) /* VCCEN1 - VCCEN0 */ -#define VCC_3V ((0<<1) | (1<<0)) -#define VCC_5V ((1<<1) | (0<<0)) -#define VCC_HIZ ((0<<1) | (0<<0)) +#define VCC_3V ((0 << 1) | (1 << 0)) +#define VCC_5V ((1 << 1) | (0 << 0)) +#define VCC_HIZ ((0 << 1) | (0 << 0)) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - - -/* PCI PB1000 specific defines */ -/* The reason these defines are here instead of au1000.h is because - * the Au1000 does not have a PCI bus controller so the PCI implementation - * on the some of the older Pb1000 boards was very board specific. - */ -#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */ - -#define SDRAM_DEVID 0xBA010000 -#define SDRAM_CMD 0xBA010004 -#define SDRAM_CLASS 0xBA010008 -#define SDRAM_MISC 0xBA01000C -#define SDRAM_MBAR 0xBA010010 - -#define PCI_IO_DATA_PORT 0xBA800000 - -#define PCI_IO_ADDR 0xBE00001C -#define PCI_INT_ACK 0xBBC00000 -#define PCI_IO_READ 0xBBC00020 -#define PCI_IO_WRITE 0xBBC00030 - -#define PCI_BRIDGE_CONFIG 0xBE000018 - -#define PCI_IO_START 0x10000000 -#define PCI_IO_END 0x1000ffff -#define PCI_MEM_START 0x18000000 -#define PCI_MEM_END 0x18ffffff - -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 1 - -static inline u8 au_pci_io_readb(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xff); -} - -static inline u16 au_pci_io_readw(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - return (readl(PCI_IO_DATA_PORT) & 0xffff); -} - -static inline u32 au_pci_io_readl(u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG); - return readl(PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writeb(u8 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writew(u16 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void au_pci_io_writel(u32 val, u32 addr) -{ - writel(addr, PCI_IO_ADDR); - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG); - writel(val, PCI_IO_DATA_PORT); -} - -static inline void set_sdram_extbyte(void) -{ - writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG); -} - -static inline void set_slot_extbyte(void) -{ - writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG); -} +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #endif /* __ASM_PB1000_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h index 63aa3926b29..b1a60f1cbd0 100644 --- a/include/asm-mips/mach-pb1x00/pb1100.h +++ b/include/asm-mips/mach-pb1x00/pb1100.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1100 Referrence Board + * Alchemy Semi Pb1100 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -27,59 +26,60 @@ #ifndef __ASM_PB1100_H #define __ASM_PB1100_H -#define PB1100_IDENT 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -# define PB1100_ROM_SEL (1<<15) -# define PB1100_ROM_SIZ (1<<14) -# define PB1100_SWAP_BOOT (1<<13) -# define PB1100_FLASH_WP (1<<12) -# define PB1100_ROM_H_STS (1<<11) -# define PB1100_ROM_L_STS (1<<10) -# define PB1100_FLASH_H_STS (1<<9) -# define PB1100_FLASH_L_STS (1<<8) -# define PB1100_SRAM_SIZ (1<<7) -# define PB1100_TSC_BUSY (1<<6) -# define PB1100_PCMCIA_VS_MASK (3<<4) -# define PB1100_RS232_CD (1<<3) -# define PB1100_RS232_CTS (1<<2) -# define PB1100_RS232_DSR (1<<1) -# define PB1100_RS232_RI (1<<0) +#define PB1100_IDENT 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +# define PB1100_ROM_SEL (1 << 15) +# define PB1100_ROM_SIZ (1 << 14) +# define PB1100_SWAP_BOOT (1 << 13) +# define PB1100_FLASH_WP (1 << 12) +# define PB1100_ROM_H_STS (1 << 11) +# define PB1100_ROM_L_STS (1 << 10) +# define PB1100_FLASH_H_STS (1 << 9) +# define PB1100_FLASH_L_STS (1 << 8) +# define PB1100_SRAM_SIZ (1 << 7) +# define PB1100_TSC_BUSY (1 << 6) +# define PB1100_PCMCIA_VS_MASK (3 << 4) +# define PB1100_RS232_CD (1 << 3) +# define PB1100_RS232_CTS (1 << 2) +# define PB1100_RS232_DSR (1 << 1) +# define PB1100_RS232_RI (1 << 0) -#define PB1100_IRDA_RS232 0xAE00000C -# define PB1100_IRDA_FULL (0<<14) /* full power */ -# define PB1100_IRDA_SHUTDOWN (1<<14) -# define PB1100_IRDA_TT (2<<14) /* 2/3 power */ -# define PB1100_IRDA_OT (3<<14) /* 1/3 power */ -# define PB1100_IRDA_FIR (1<<13) +#define PB1100_IRDA_RS232 0xAE00000C +# define PB1100_IRDA_FULL (0 << 14) /* full power */ +# define PB1100_IRDA_SHUTDOWN (1 << 14) +# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ +# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ +# define PB1100_IRDA_FIR (1 << 13) -#define PCMCIA_BOARD_REG 0xAE000010 -# define PB1100_SD_WP1_RO (1<<15) /* read only */ -# define PB1100_SD_WP0_RO (1<<14) /* read only */ -# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */ -# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */ -# define PB1100_SEL_SD_CONN1 (1<<9) -# define PB1100_SEL_SD_CONN0 (1<<8) -# define PC_DEASSERT_RST (1<<7) -# define PC_DRV_EN (1<<4) +#define PCMCIA_BOARD_REG 0xAE000010 +# define PB1100_SD_WP1_RO (1 << 15) /* read only */ +# define PB1100_SD_WP0_RO (1 << 14) /* read only */ +# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ +# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ +# define PB1100_SEL_SD_CONN1 (1 << 9) +# define PB1100_SEL_SD_CONN0 (1 << 8) +# define PC_DEASSERT_RST (1 << 7) +# define PC_DRV_EN (1 << 4) -#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ +#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ -#define PB1100_RST_VDDI 0xAE00001C -# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */ -# define PB1100_VDDI_MASK (0x1F) +#define PB1100_RST_VDDI 0xAE00001C +# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ +# define PB1100_VDDI_MASK 0x1F -#define PB1100_LEDS 0xAE000018 +#define PB1100_LEDS 0xAE000018 -/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. - * 7:0 is the LED Display's decimal points. +/* + * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. + * 7:0 is the LED Display's decimal points. */ -#define PB1100_HEX_LED 0xAE000018 +#define PB1100_HEX_LED 0xAE000018 -/* PCMCIA PB1100 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA Pb1100 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) #endif /* __ASM_PB1100_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index e2c6bcac3b4..c8618df88cb 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -1,5 +1,5 @@ /* - * AMD Alchemy PB1200 Referrence Board + * AMD Alchemy Pb1200 Referrence Board * Board Registers defines. * * ######################################################################## @@ -27,21 +27,20 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -// This is defined in au1000.h with bogus value -#undef AU1X00_EXTERNAL_INT +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* SPI and SMB are muxed on the Pb1200 board. - Refer to board documentation. +/* + * SPI and SMB are muxed on the Pb1200 board. + * Refer to board documentation. */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* AC97 and I2S are muxed on the Pb1200 board. - Refer to board documentation. +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define SMBUS_PSC_BASE PSC0_BASE_ADDR +/* + * AC97 and I2S are muxed on the Pb1200 board. + * Refer to board documentation. */ #define AC97_PSC_BASE PSC1_BASE_ADDR #define I2S_PSC_BASE PSC1_BASE_ADDR @@ -102,10 +101,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_STATUS_SWAPBOOT 0x0040 #define BCSR_STATUS_FLASHBUSY 0x0100 #define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 +#define BCSR_STATUS_SD0WP 0x0400 +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_U0RXD 0x1000 +#define BCSR_STATUS_U1RXD 0x2000 #define BCSR_SWITCHES_OCTAL 0x00FF #define BCSR_SWITCHES_DIP_1 0x0080 @@ -123,11 +122,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_RESETS_DC 0x0004 #define BCSR_RESETS_IDE 0x0008 /* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 +#define BCSR_RESETS_WSCFSM 0x0800 #define BCSR_RESETS_PCS0MUX 0x1000 #define BCSR_RESETS_PCS1MUX 0x2000 #define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 +#define BCSR_RESETS_SD1MUX 0x8000 #define BCSR_PCMCIA_PC0VPP 0x0003 #define BCSR_PCMCIA_PC0VCC 0x000C @@ -163,7 +162,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_PC0STSCHG 0x0008 #define BCSR_INT_PC1 0x0010 #define BCSR_INT_PC1STSCHG 0x0020 -#define BCSR_INT_DC 0x0040 +#define BCSR_INT_DC 0x0040 #define BCSR_INT_FLASHBUSY 0x0080 #define BCSR_INT_PC0INSERT 0x0100 #define BCSR_INT_PC0EJECT 0x0200 @@ -174,14 +173,6 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD1INSERT 0x4000 #define BCSR_INT_SD1EJECT 0x8000 -/* PCMCIA Db1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - #define SMC91C111_PHYS_ADDR 0x0D000300 #define SMC91C111_INT PB1200_ETH_INT @@ -192,18 +183,19 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x1C000000 +#define NAND_PHYS_ADDR 0x1C000000 -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. - * These defines are here rather than an SOC1200 generic file because + * These defines are here rather than an Au1200 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -211,11 +203,10 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) - +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) /* * External Interrupts for Pb1200 as of 8/6/2004. @@ -248,13 +239,21 @@ enum external_pb1200_ints { PB1200_INT_END = PB1200_INT_BEGIN + 15 }; -/* For drivers/pcmcia/au1000_db1x00.c */ -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* + * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c + */ +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -/* Nand chip select */ +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) + +#define BOARD_PC0_INT PB1200_PC0_INT +#define BOARD_PC1_INT PB1200_PC1_INT +#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) + +/* NAND chip select */ #define NAND_CS 1 #endif /* __ASM_PB1200_H */ - diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h index ff6d40c87a2..da51a2eb7b8 100644 --- a/include/asm-mips/mach-pb1x00/pb1500.h +++ b/include/asm-mips/mach-pb1x00/pb1500.h @@ -1,9 +1,8 @@ /* - * Alchemy Semi PB1500 Referrence Board + * Alchemy Semi Pb1500 Referrence Board * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com + * Copyright 2001, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> * * ######################################################################## * @@ -27,25 +26,24 @@ #ifndef __ASM_PB1500_H #define __ASM_PB1500_H +#define IDENT_BOARD_REG 0xAE000000 +#define BOARD_STATUS_REG 0xAE000004 +#define PCI_BOARD_REG 0xAE000010 +#define PCMCIA_BOARD_REG 0xAE000010 +# define PC_DEASSERT_RST 0x80 +# define PC_DRV_EN 0x10 +#define PB1500_G_CONTROL 0xAE000014 +#define PB1500_RST_VDDI 0xAE00001C +#define PB1500_LEDS 0xAE000018 -#define IDENT_BOARD_REG 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -#define PCI_BOARD_REG 0xAE000010 -#define PCMCIA_BOARD_REG 0xAE000010 - #define PC_DEASSERT_RST 0x80 - #define PC_DRV_EN 0x10 -#define PB1500_G_CONTROL 0xAE000014 -#define PB1500_RST_VDDI 0xAE00001C -#define PB1500_LEDS 0xAE000018 +#define PB1500_HEX_LED 0xAF000004 +#define PB1500_HEX_LED_BLANK 0xAF000008 -#define PB1500_HEX_LED 0xAF000004 -#define PB1500_HEX_LED_BLANK 0xAF000008 - -/* PCMCIA PB1500 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +/* PCMCIA Pb1500 specific defines */ +#define PCMCIA_MAX_SOCK 0 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0)) +#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) #endif /* __ASM_PB1500_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h index c2ab0e2df4a..6704a11497d 100644 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -30,15 +30,15 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR #define BCSR_PHYS_ADDR 0xAF000000 @@ -129,12 +129,12 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define BCSR_SYSTEM_POWEROFF 0x4000 #define BCSR_SYSTEM_RESET 0x8000 -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) #define PB1550_BOTH_BANKS @@ -144,16 +144,17 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define PB1550_USER_ONLY #endif -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. * These defines are here rather than an SOC1550 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) #define NAND_CS 1 -/* should be done by yamon */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_PB1550_H */ diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h index 65778c890a6..20b666022dc 100644 --- a/include/asm-mips/rtlx.h +++ b/include/asm-mips/rtlx.h @@ -29,13 +29,13 @@ extern unsigned int rtlx_read_poll(int index, int can_sleep); extern unsigned int rtlx_write_poll(int index); enum rtlx_state { - RTLX_STATE_UNUSED, + RTLX_STATE_UNUSED = 0, RTLX_STATE_INITIALISED, RTLX_STATE_REMOTE_READY, RTLX_STATE_OPENED }; -#define RTLX_BUFFER_SIZE 1024 +#define RTLX_BUFFER_SIZE 2048 /* each channel supports read and write. linux (vpe0) reads lx_buffer and writes rt_buffer diff --git a/include/asm-mips/types.h b/include/asm-mips/types.h index 2dd147f519d..bcbb8d675af 100644 --- a/include/asm-mips/types.h +++ b/include/asm-mips/types.h @@ -9,37 +9,15 @@ #ifndef _ASM_TYPES_H #define _ASM_TYPES_H -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if (_MIPS_SZLONG == 64) - -typedef __signed__ long __s64; -typedef unsigned long __u64; - +#if _MIPS_SZLONG == 64 +# include <asm-generic/int-l64.h> #else - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; +# include <asm-generic/int-ll64.h> #endif -#endif +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; #endif /* __ASSEMBLY__ */ @@ -52,30 +30,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ - -typedef __signed char s8; -typedef unsigned char u8; - -typedef __signed short s16; -typedef unsigned short u16; - -typedef __signed int s32; -typedef unsigned int u32; - -#if (_MIPS_SZLONG == 64) - -typedef __signed__ long s64; -typedef unsigned long u64; - -#else - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __signed__ long long s64; -typedef unsigned long long u64; -#endif - -#endif - #if (defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) \ || defined(CONFIG_64BIT) typedef u64 dma_addr_t; diff --git a/include/asm-mn10300/div64.h b/include/asm-mn10300/div64.h index bf9c515a998..3a8329b3e86 100644 --- a/include/asm-mn10300/div64.h +++ b/include/asm-mn10300/div64.h @@ -97,7 +97,4 @@ signed __muldiv64s(signed val, signed mult, signed div) return result; } -extern __attribute__((const)) -uint64_t div64_64(uint64_t dividend, uint64_t divisor); - #endif /* _ASM_DIV64 */ diff --git a/include/asm-mn10300/processor.h b/include/asm-mn10300/processor.h index f1b081f5346..73239271873 100644 --- a/include/asm-mn10300/processor.h +++ b/include/asm-mn10300/processor.h @@ -58,7 +58,7 @@ extern struct mn10300_cpuinfo boot_cpu_data; extern void identify_cpu(struct mn10300_cpuinfo *); extern void print_cpu_info(struct mn10300_cpuinfo *); extern void dodgy_tsc(void); -#define cpu_relax() do {} while (0) +#define cpu_relax() barrier() /* * User space process size: 1.75GB (default). diff --git a/include/asm-mn10300/types.h b/include/asm-mn10300/types.h index d40ea7628bf..7b9f01042fd 100644 --- a/include/asm-mn10300/types.h +++ b/include/asm-mn10300/types.h @@ -11,29 +11,12 @@ #ifndef _ASM_TYPES_H #define _ASM_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) -typedef __signed__ long long __s64; -typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -45,18 +28,6 @@ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h index 56c84802da5..7f5a39bfb4c 100644 --- a/include/asm-parisc/types.h +++ b/include/asm-parisc/types.h @@ -1,29 +1,12 @@ #ifndef _PARISC_TYPES_H #define _PARISC_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -41,18 +24,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index afae0697e8c..e0062d73db1 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -2,7 +2,7 @@ #define _ASM_POWERPC_IO_H #ifdef __KERNEL__ -/* +/* * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -18,6 +18,9 @@ extern int check_legacy_ioport(unsigned long base_port); #define _PNPWRP 0xa79 #define PNPBIOS_BASE 0xf000 +#include <linux/device.h> +#include <linux/io.h> + #include <linux/compiler.h> #include <asm/page.h> #include <asm/byteorder.h> @@ -744,6 +747,9 @@ static inline void * bus_to_virt(unsigned long address) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) +void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, + size_t size, unsigned long flags); + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/kvm_host.h b/include/asm-powerpc/kvm_host.h index 04ffbb8e0a3..81a69d71101 100644 --- a/include/asm-powerpc/kvm_host.h +++ b/include/asm-powerpc/kvm_host.h @@ -59,6 +59,7 @@ struct kvm_vcpu_stat { u32 emulated_inst_exits; u32 dec_exits; u32 ext_intr_exits; + u32 halt_wakeup; }; struct tlbe { diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h index 7ac820308a7..b35a7e3ef97 100644 --- a/include/asm-powerpc/kvm_ppc.h +++ b/include/asm-powerpc/kvm_ppc.h @@ -77,12 +77,17 @@ static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) clear_bit(priority, &vcpu->arch.pending_exceptions); } +/* Helper function for "full" MSR writes. No need to call this if only EE is + * changing. */ static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) { if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); vcpu->arch.msr = new_msr; + + if (vcpu->arch.msr & MSR_WE) + kvm_vcpu_block(vcpu); } #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 7c97b5a08d0..c08e714d0c4 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -209,6 +209,13 @@ extern int icache_44x_need_flush; * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attibute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * * There are some constrains and options, to decide mapping software bits * into TLB entry. * diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h index 9e8ed6824e1..81ffe3b3c1c 100644 --- a/include/asm-powerpc/ps3.h +++ b/include/asm-powerpc/ps3.h @@ -178,9 +178,6 @@ enum ps3_cpu_binding { PS3_BINDING_CPU_1 = 1, }; -int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet, - unsigned int *virq); -int ps3_virq_destroy(unsigned int virq); int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, unsigned int *virq); int ps3_irq_plug_destroy(unsigned int virq); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index e3c845b0f76..6abead6e681 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -100,6 +100,7 @@ /* Flag indicating progress during context switch. */ #define SPU_CONTEXT_SWITCH_PENDING 0UL +#define SPU_CONTEXT_FAULT_PENDING 1UL struct spu_context; struct spu_runqueue; @@ -128,9 +129,11 @@ struct spu { unsigned int irqs[3]; u32 node; u64 flags; - u64 dar; - u64 dsisr; u64 class_0_pending; + u64 class_0_dar; + u64 class_0_dsisr; + u64 class_1_dar; + u64 class_1_dsisr; size_t ls_size; unsigned int slb_replace; struct mm_struct *mm; @@ -143,7 +146,7 @@ struct spu { void (* wbox_callback)(struct spu *spu); void (* ibox_callback)(struct spu *spu); - void (* stop_callback)(struct spu *spu); + void (* stop_callback)(struct spu *spu, int irq); void (* mfc_callback)(struct spu *spu); char irq_c0[8]; diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 0ab6bff8607..129ec148d45 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -254,7 +254,8 @@ struct spu_state { u64 spu_chnldata_RW[32]; u32 spu_mailbox_data[4]; u32 pu_mailbox_data[1]; - u64 dar, dsisr, class_0_pending; + u64 class_0_dar, class_0_dsisr, class_0_pending; + u64 class_1_dar, class_1_dsisr; unsigned long suspend_time; spinlock_t register_lock; }; diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h index b3ca41fc8bb..2b8a458f990 100644 --- a/include/asm-powerpc/syscalls.h +++ b/include/asm-powerpc/syscalls.h @@ -30,7 +30,7 @@ asmlinkage int sys_fork(unsigned long p1, unsigned long p2, asmlinkage int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3, unsigned long p4, unsigned long p5, unsigned long p6, struct pt_regs *regs); -asmlinkage int sys_pipe(int __user *fildes); +asmlinkage long sys_pipe(int __user *fildes); asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, struct sigaction __user *oact, size_t sigsetsize); diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h index c243a6ac60e..d3374bc865b 100644 --- a/include/asm-powerpc/types.h +++ b/include/asm-powerpc/types.h @@ -1,6 +1,12 @@ #ifndef _ASM_POWERPC_TYPES_H #define _ASM_POWERPC_TYPES_H +#ifdef __powerpc64__ +# include <asm-generic/int-l64.h> +#else +# include <asm-generic/int-ll64.h> +#endif + #ifndef __ASSEMBLY__ /* @@ -22,30 +28,6 @@ typedef unsigned int umode_t; typedef unsigned short umode_t; #endif -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#ifdef __powerpc64__ -typedef __signed__ long __s64; -typedef unsigned long __u64; -#else -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif -#endif /* __powerpc64__ */ - typedef struct { __u32 u[4]; } __attribute__((aligned(16))) __vector128; @@ -64,24 +46,6 @@ typedef struct { #ifndef __ASSEMBLY__ - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -#ifdef __powerpc64__ -typedef signed long s64; -typedef unsigned long u64; -#else -typedef signed long long s64; -typedef unsigned long long u64; -#endif - typedef __vector128 vector128; /* Physical address used by some IO functions */ diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h index 0593cb889d4..70ebd333c55 100644 --- a/include/asm-ppc/system.h +++ b/include/asm-ppc/system.h @@ -178,7 +178,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size } -extern inline void * xchg_ptr(void * m, void * val) +static inline void * xchg_ptr(void * m, void * val) { return (void *) xchg_u32(m, (unsigned long) val); } diff --git a/include/asm-s390/kvm_host.h b/include/asm-s390/kvm_host.h index f8204a4f2e0..18cbd8a3979 100644 --- a/include/asm-s390/kvm_host.h +++ b/include/asm-s390/kvm_host.h @@ -104,6 +104,7 @@ struct sie_block { struct kvm_vcpu_stat { u32 exit_userspace; + u32 exit_null; u32 exit_external_request; u32 exit_external_interrupt; u32 exit_stop_request; diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h index f0f4579eac1..12fd9c4f0f1 100644 --- a/include/asm-s390/page.h +++ b/include/asm-s390/page.h @@ -125,6 +125,17 @@ page_get_storage_key(unsigned long addr) return skey; } +#ifdef CONFIG_PAGE_STATES + +struct page; +void arch_free_page(struct page *page, int order); +void arch_alloc_page(struct page *page, int order); + +#define HAVE_ARCH_FREE_PAGE +#define HAVE_ARCH_ALLOC_PAGE + +#endif + #endif /* !__ASSEMBLY__ */ /* to align the pointer to the (next) page boundary */ diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h index 441d7c26085..d7d4e2eb3e6 100644 --- a/include/asm-s390/ptrace.h +++ b/include/asm-s390/ptrace.h @@ -471,6 +471,8 @@ struct task_struct; extern void user_enable_single_step(struct task_struct *); extern void user_disable_single_step(struct task_struct *); +#define __ARCH_WANT_COMPAT_SYS_PTRACE + #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define regs_return_value(regs)((regs)->gprs[2]) diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index c819ae25a84..e0d4500d5f9 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -116,6 +116,12 @@ extern void pfault_fini(void); #define pfault_fini() do { } while (0) #endif /* CONFIG_PFAULT */ +#ifdef CONFIG_PAGE_STATES +extern void cmma_init(void); +#else +static inline void cmma_init(void) { } +#endif + #define finish_arch_switch(prev) do { \ set_fs(current->thread.mm_segment); \ account_vtime(prev); \ diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h index 2c5879ae90c..0e959e20e9a 100644 --- a/include/asm-s390/types.h +++ b/include/asm-s390/types.h @@ -9,34 +9,16 @@ #ifndef _S390_TYPES_H #define _S390_TYPES_H +#ifndef __s390x__ +# include <asm-generic/int-ll64.h> +#else +# include <asm-generic/int-l64.h> +#endif + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#ifndef __s390x__ -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif -#else /* __s390x__ */ -typedef __signed__ long __s64; -typedef unsigned long __u64; -#endif - /* A address type so that arithmetic can be done on it & it can be upgraded to 64 bit when necessary */ @@ -58,24 +40,6 @@ typedef __signed__ long saddr_t; #ifndef __ASSEMBLY__ - -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -#ifndef __s390x__ -typedef signed long long s64; -typedef unsigned long long u64; -#else /* __s390x__ */ -typedef signed long s64; -typedef unsigned long u64; -#endif /* __s390x__ */ - typedef u32 dma_addr_t; #ifndef __s390x__ diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h index 092ff9d872c..6813c3220a1 100644 --- a/include/asm-sh/cpu-sh3/dma.h +++ b/include/asm-sh/cpu-sh3/dma.h @@ -3,19 +3,19 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) + defined(CONFIG_CPU_SUBTYPE_SH7721) #define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) #define DMTE0_IRQ 48 #define DMTE1_IRQ 49 #define DMTE2_IRQ 50 #define DMTE3_IRQ 51 #define DMTE4_IRQ 76 #define DMTE5_IRQ 77 - -#else -#define SH_DMAC_BASE 0xa4000020 #endif /* Definitions for the SuperH DMAC */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index c958fdaa009..7438d1e21bc 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,6 +79,10 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; +#ifdef CONFIG_CPU_SH3 + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif }; #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) @@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = { \ chipname, \ } +#ifdef CONFIG_CPU_SH3 +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + void __init register_intc_controller(struct intc_desc *desc); int intc_set_priority(unsigned int irq, unsigned int prio); void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h index 356e50d0674..a4fbf0c84fb 100644 --- a/include/asm-sh/io.h +++ b/include/asm-sh/io.h @@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr); unsigned long long poke_real_address_q(unsigned long long addr, unsigned long long val); -/* arch/sh/mm/ioremap_64.c */ -unsigned long onchip_remap(unsigned long addr, unsigned long size, - const char *name); -extern void onchip_unmap(unsigned long vaddr); - #if !defined(CONFIG_MMU) #define virt_to_phys(address) ((unsigned long)(address)) #define phys_to_virt(address) ((void *)(address)) @@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr); void __iomem *__ioremap(unsigned long offset, unsigned long size, unsigned long flags); void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); #else #define __ioremap(offset, size, flags) ((void __iomem *)(offset)) #define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) #endif /* CONFIG_MMU */ static inline void __iomem * diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h deleted file mode 100644 index 31dcc4fa5f2..00000000000 --- a/include/asm-sh/keyboard.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASM_SH_KEYBOARD_H -#define __ASM_SH_KEYBOARD_H -/* - * $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $ - */ - -#include <linux/kd.h> -#include <asm/machvec.h> - -#ifdef CONFIG_SH_MPC1211 -#include <asm/mpc1211/keyboard-mpc1211.h> -#endif -#endif diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index fe58d00b250..87e812f68bb 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,6 +27,7 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 +#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) @@ -38,7 +39,6 @@ */ #define MMU_VPN_MASK 0xfffff000 -#ifdef CONFIG_MMU #if defined(CONFIG_SUPERH32) #include "mmu_context_32.h" #else @@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev, #define destroy_context(mm) do { } while (0) #define set_asid(asid) do { } while (0) #define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) #define set_TTB(pgd) do { } while (0) #define get_TTB() (0) #define activate_context(mm,cpu) do { } while (0) diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h index 7969f381dff..2969253c404 100644 --- a/include/asm-sh/mmzone.h +++ b/include/asm-sh/mmzone.h @@ -41,6 +41,8 @@ void __init plat_mem_setup(void); /* arch/sh/kernel/setup.c */ void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); #endif /* __KERNEL__ */ #endif /* __ASM_SH_MMZONE_H */ diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h deleted file mode 100644 index e506d1aaa0d..00000000000 --- a/include/asm-sh/mpc1211/dma.h +++ /dev/null @@ -1,303 +0,0 @@ -/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $ - * linux/include/asm/dma.h: Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - */ - -#ifndef _ASM_MPC1211_DMA_H -#define _ASM_MPC1211_DMA_H - -#include <linux/spinlock.h> /* And spinlocks */ -#include <asm/io.h> /* need byte IO */ -#include <linux/delay.h> - - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * DMA transfers are limited to the lower 16MB of _physical_ memory. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -#define MAX_DMA_CHANNELS 8 - -/* The maximum address that we can perform a DMA transfer to on this platform */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_PAGE_0 0x87 /* DMA page registers */ -#define DMA_PAGE_1 0x83 -#define DMA_PAGE_2 0x81 -#define DMA_PAGE_3 0x82 -#define DMA_PAGE_5 0x8B -#define DMA_PAGE_6 0x89 -#define DMA_PAGE_7 0x8A - -#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ -#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr, DMA1_MASK_REG); - else - dma_outb(dmanr & 3, DMA2_MASK_REG); -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while holding the DMA lock ! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr<=3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr<=3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr&3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr) -{ - switch(dmanr) { - case 0: - dma_outb( pagenr & 0xff, DMA_PAGE_0); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400); - break; - case 1: - dma_outb( pagenr & 0xff, DMA_PAGE_1); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400); - break; - case 2: - dma_outb( pagenr & 0xff, DMA_PAGE_2); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400); - break; - case 3: - dma_outb( pagenr & 0xff, DMA_PAGE_3); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400); - break; - case 5: - dma_outb( pagenr & 0xfe, DMA_PAGE_5); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400); - break; - case 6: - dma_outb( pagenr & 0xfe, DMA_PAGE_6); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400); - break; - case 7: - dma_outb( pagenr & 0xfe, DMA_PAGE_7); - dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400); - break; - } -} - - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - set_dma_page(dmanr, a>>16); - if (dmanr <= 3) { - dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); - } else { - dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); - } -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); - } else { - dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE - : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - return (dmanr<=3)? count : (count<<1); -} - - -/* These are in kernel/dma.c: */ -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_MPC1211_DMA_H */ diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h deleted file mode 100644 index 6298370bec2..00000000000 --- a/include/asm-sh/mpc1211/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-sh/mpc1211/io.h - * - * Copyright 2001 Saito.K & Jeanne - * - * IO functions for an Interface MPC-1211 - */ - -#ifndef _ASM_SH_IO_MPC1211_H -#define _ASM_SH_IO_MPC1211_H - -#include <linux/time.h> - -extern int mpc1211_irq_demux(int irq); - -extern void init_mpc1211_IRQ(void); -extern void heartbeat_mpc1211(void); - -extern void mpc1211_rtc_gettimeofday(struct timeval *tv); -extern int mpc1211_rtc_settimeofday(const struct timeval *tv); - -#endif /* _ASM_SH_IO_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h deleted file mode 100644 index 9020feee7b4..00000000000 --- a/include/asm-sh/mpc1211/keyboard.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * MPC1211 specific keybord definitions - * Taken from the old asm-i386/keybord.h for PC/AT-style definitions - * created 3 Nov 1996 by Geert Uytterhoeven. - */ - -#ifdef __KERNEL__ - -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/kd.h> -#include <linux/pm.h> -#include <asm/io.h> - -#define KEYBOARD_IRQ 1 -#define DISABLE_KBD_DURING_INTERRUPTS 0 - -extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode); -extern int pckbd_getkeycode(unsigned int scancode); -extern int pckbd_translate(unsigned char scancode, unsigned char *keycode, - char raw_mode); -extern char pckbd_unexpected_up(unsigned char keycode); -extern void pckbd_leds(unsigned char leds); -extern void pckbd_init_hw(void); -extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *); -extern pm_callback pm_kbd_request_override; - -#define kbd_setkeycode pckbd_setkeycode -#define kbd_getkeycode pckbd_getkeycode -#define kbd_translate pckbd_translate -#define kbd_unexpected_up pckbd_unexpected_up -#define kbd_leds pckbd_leds -#define kbd_init_hw pckbd_init_hw - -/* resource allocation */ -#define kbd_request_region() -#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \ - "keyboard", NULL) - -/* How to access the keyboard macros on this platform. */ -#define kbd_read_input() inb(KBD_DATA_REG) -#define kbd_read_status() inb(KBD_STATUS_REG) -#define kbd_write_output(val) outb(val, KBD_DATA_REG) -#define kbd_write_command(val) outb(val, KBD_CNTL_REG) - -/* Some stoneage hardware needs delays after some operations. */ -#define kbd_pause() do { } while(0) - -/* - * Machine specific bits for the PS/2 driver - */ - -#define AUX_IRQ 12 - -#define aux_request_irq(hand, dev_id) \ - request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id) - -#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id) - -#endif /* __KERNEL__ */ diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h deleted file mode 100644 index c95d13236c3..00000000000 --- a/include/asm-sh/mpc1211/m1543c.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __ASM_SH_M1543C_H -#define __ASM_SH_M1543C_H - -/* - * linux/include/asm-sh/m1543c.h - * Copyright (C) 2001 Nobuhiro Sakawa - * M1543C:PCI-ISA Bus Bridge with Super IO Chip support - * - * from - * - * linux/include/asm-sh/smc37c93x.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * SMSC 37C93x Super IO Chip support - */ - -/* Default base I/O address */ -#define FDC_PRIMARY_BASE 0x3f0 -#define IDE1_PRIMARY_BASE 0x1f0 -#define IDE1_SECONDARY_BASE 0x170 -#define PARPORT_PRIMARY_BASE 0x378 -#define COM1_PRIMARY_BASE 0x2f8 -#define COM2_PRIMARY_BASE 0x3f8 -#define COM3_PRIMARY_BASE 0x3e8 -#define RTC_PRIMARY_BASE 0x070 -#define KBC_PRIMARY_BASE 0x060 -#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ -#define I8259_M_CR 0x20 -#define I8259_M_MR 0x21 -#define I8259_S_CR 0xa0 -#define I8259_S_MR 0xa1 - -/* Logical device number */ -#define LDN_FDC 0 -#define LDN_IDE1 1 -#define LDN_IDE2 2 -#define LDN_PARPORT 3 -#define LDN_COM1 4 -#define LDN_COM2 5 -#define LDN_COM3 11 -#define LDN_RTC 6 -#define LDN_KBC 7 - -/* Configuration port and key */ -#define CONFIG_PORT 0x3f0 -#define INDEX_PORT CONFIG_PORT -#define DATA_PORT 0x3f1 -#define CONFIG_ENTER1 0x51 -#define CONFIG_ENTER2 0x23 -#define CONFIG_EXIT 0xbb - -/* Configuration index */ -#define CURRENT_LDN_INDEX 0x07 -#define POWER_CONTROL_INDEX 0x22 -#define ACTIVATE_INDEX 0x30 -#define IO_BASE_HI_INDEX 0x60 -#define IO_BASE_LO_INDEX 0x61 -#define IRQ_SELECT_INDEX 0x70 -#define PS2_IRQ_INDEX 0x72 -#define DMA_SELECT_INDEX 0x74 - -/* UART stuff. Only for debugging. */ -/* UART Register */ - -#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ -#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ -#define UART_IER 0x2 /* Interrupt Enable Register */ -#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ -#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ -#define UART_LCR 0x6 /* Line Control Register */ -#define UART_MCR 0x8 /* MODEM Control Register */ -#define UART_LSR 0xa /* Line Status Register */ -#define UART_MSR 0xc /* MODEM Status Register */ -#define UART_SCR 0xe /* Scratch Register */ -#define UART_DLL 0x0 /* Divisor Latch (LS) */ -#define UART_DLM 0x2 /* Divisor Latch (MS) */ - -#ifndef __ASSEMBLY__ -typedef struct uart_reg { - volatile __u16 rbr; - volatile __u16 ier; - volatile __u16 iir; - volatile __u16 lcr; - volatile __u16 mcr; - volatile __u16 lsr; - volatile __u16 msr; - volatile __u16 scr; -} uart_reg; -#endif /* ! __ASSEMBLY__ */ - -/* Alias for Write Only Register */ - -#define thr rbr -#define tcr iir - -/* Alias for Divisor Latch Register */ - -#define dll rbr -#define dlm ier -#define fcr iir - -/* Interrupt Enable Register */ - -#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ -#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ -#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ -#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ - -/* Interrupt Ident Register */ - -#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ -#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ -#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ -#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ -#define IIR_FIFO 0xc000 /* FIFOs enabled */ - -/* FIFO Control Register */ - -#define FCR_FEN 0x0100 /* FIFO enable */ -#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ -#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ -#define FCR_DMA 0x0800 /* DMA mode select */ -#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ -#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ - -/* Line Control Register */ - -#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ -#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ -#define LCR_STB 0x0400 /* Number of Stop Bits */ -#define LCR_PEN 0x0800 /* Parity Enable */ -#define LCR_EPS 0x1000 /* Even Parity Select */ -#define LCR_SP 0x2000 /* Stick Parity */ -#define LCR_SB 0x4000 /* Set Break */ -#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ - -/* MODEM Control Register */ - -#define MCR_DTR 0x0100 /* Data Terminal Ready */ -#define MCR_RTS 0x0200 /* Request to Send */ -#define MCR_OUT1 0x0400 /* Out 1 */ -#define MCR_IRQEN 0x0800 /* IRQ Enable */ -#define MCR_LOOP 0x1000 /* Loop */ - -/* Line Status Register */ - -#define LSR_DR 0x0100 /* Data Ready */ -#define LSR_OE 0x0200 /* Overrun Error */ -#define LSR_PE 0x0400 /* Parity Error */ -#define LSR_FE 0x0800 /* Framing Error */ -#define LSR_BI 0x1000 /* Break Interrupt */ -#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ -#define LSR_TEMT 0x4000 /* Transmitter Empty */ -#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ - -/* MODEM Status Register */ - -#define MSR_DCTS 0x0100 /* Delta Clear to Send */ -#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ -#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ -#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ -#define MSR_CTS 0x1000 /* Clear to Send */ -#define MSR_DSR 0x2000 /* Data Set Ready */ -#define MSR_RI 0x4000 /* Ring Indicator */ -#define MSR_DCD 0x8000 /* Data Carrier Detect */ - -/* Baud Rate Divisor */ - -#define UART_CLK (1843200) /* 1.8432 MHz */ -#define UART_BAUD(x) (UART_CLK / (16 * (x))) - -/* RTC register definition */ -#define RTC_SECONDS 0 -#define RTC_SECONDS_ALARM 1 -#define RTC_MINUTES 2 -#define RTC_MINUTES_ALARM 3 -#define RTC_HOURS 4 -#define RTC_HOURS_ALARM 5 -#define RTC_DAY_OF_WEEK 6 -#define RTC_DAY_OF_MONTH 7 -#define RTC_MONTH 8 -#define RTC_YEAR 9 -#define RTC_FREQ_SELECT 10 -# define RTC_UIP 0x80 -# define RTC_DIV_CTL 0x70 -/* This RTC can work under 32.768KHz clock only. */ -# define RTC_OSC_ENABLE 0x20 -# define RTC_OSC_DISABLE 0x00 -#define RTC_CONTROL 11 -# define RTC_SET 0x80 -# define RTC_PIE 0x40 -# define RTC_AIE 0x20 -# define RTC_UIE 0x10 -# define RTC_SQWE 0x08 -# define RTC_DM_BINARY 0x04 -# define RTC_24H 0x02 -# define RTC_DST_EN 0x01 - -#endif /* __ASM_SH_M1543C_H */ diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h deleted file mode 100644 index e245f2a3cd7..00000000000 --- a/include/asm-sh/mpc1211/mc146818rtc.h +++ /dev/null @@ -1,6 +0,0 @@ -/* - * MPC1211 uses PC/AT style RTC definitions. - */ -#include <asm-x86/mc146818rtc_32.h> - - diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h deleted file mode 100644 index fa456c3e4e0..00000000000 --- a/include/asm-sh/mpc1211/mpc1211.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_SH_MPC1211_H -#define __ASM_SH_MPC1211_H - -/* - * linux/include/asm-sh/mpc1211.h - * - * Copyright (C) 2001 Saito.K & Jeanne - * - * Interface MPC-1211 support - */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#endif /* __ASM_SH_MPC1211_H */ diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h deleted file mode 100644 index d9162c5ed76..00000000000 --- a/include/asm-sh/mpc1211/pci.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Low-Level PCI Support for MPC-1211 - * - * (c) 2002 Saito.K & Jeanne - * - */ - -#ifndef _PCI_MPC1211_H_ -#define _PCI_MPC1211_H_ - -#include <linux/pci.h> - -/* set debug level 4=verbose...1=terse */ -//#define DEBUG_PCI 3 -#undef DEBUG_PCI - -#ifdef DEBUG_PCI -#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); } -#else -#define PCIDBG(n, x...) -#endif - -/* startup values */ -#define PCI_PROBE_BIOS 1 -#define PCI_PROBE_CONF1 2 -#define PCI_PROBE_CONF2 4 -#define PCI_NO_CHECKS 0x400 -#define PCI_ASSIGN_ROMS 0x1000 -#define PCI_BIOS_IRQ_SCAN 0x2000 - -/* MPC-1211 Specific Values */ -#define PCIPAR (0xa4000cf8) /* PCI Config address */ -#define PCIPDR (0xa4000cfc) /* PCI Config data */ - -#define PA_PCI_IO (0xa4000000) /* PCI I/O space */ -#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */ - -#endif /* _PCI_MPC1211_H_ */ diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h index a33838f23a6..306f7359f7d 100644 --- a/include/asm-sh/r7780rp.h +++ b/include/asm-sh/r7780rp.h @@ -193,8 +193,6 @@ #define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) #define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) -unsigned char *highlander_init_irq_r7780mp(void); -unsigned char *highlander_init_irq_r7780rp(void); -unsigned char *highlander_init_irq_r7785rp(void); +unsigned char *highlander_plat_irq_setup(void); #endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h index 0308e05fc57..0a96f3af69e 100644 --- a/include/asm-sh/tlb_64.h +++ b/include/asm-sh/tlb_64.h @@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot) __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); } +#ifdef CONFIG_MMU /* arch/sh64/mm/tlb.c */ int sh64_tlb_init(void); unsigned long long sh64_next_free_dtlb_entry(void); @@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry); void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, unsigned long asid, unsigned long paddr); void sh64_teardown_tlb_slot(unsigned long long config_addr); - +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_TLB_64_H */ diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h index 34cdb28e8f4..95f0085e098 100644 --- a/include/asm-sh/topology.h +++ b/include/asm-sh/topology.h @@ -29,6 +29,17 @@ .nr_balance_failed = 0, \ } +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) #endif #include <asm-generic/topology.h> diff --git a/include/asm-sh/types.h b/include/asm-sh/types.h index a6e1d4126e6..beea4e6f8df 100644 --- a/include/asm-sh/types.h +++ b/include/asm-sh/types.h @@ -1,29 +1,12 @@ #ifndef __ASM_SH_TYPES_H #define __ASM_SH_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -35,19 +18,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ - -typedef __signed__ char s8; -typedef unsigned char u8; - -typedef __signed__ short s16; -typedef unsigned short u16; - -typedef __signed__ int s32; -typedef unsigned int u32; - -typedef __signed__ long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index f956b7b316c..a9b68d09484 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -274,7 +274,9 @@ struct exception_table_entry unsigned long insn, fixup; }; +#ifdef CONFIG_MMU #define ARCH_HAS_SEARCH_EXTABLE +#endif /* Returns 0 if exception not found and fixup.unit otherwise. */ extern unsigned long search_exception_table(unsigned long addr); diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h index 17ba82ee220..7becc846544 100644 --- a/include/asm-sparc/oplib.h +++ b/include/asm-sparc/oplib.h @@ -34,9 +34,6 @@ extern unsigned int prom_rev, prom_prev; */ extern int prom_root_node; -/* PROM stdin and stdout */ -extern int prom_stdin, prom_stdout; - /* Pointer to prom structure containing the device tree traversal * and usage utility functions. Only prom-lib should use these, * users use the interface defined by the library only! @@ -84,20 +81,6 @@ extern int prom_devclose(int device_handle); extern void prom_seek(int device_handle, unsigned int seek_hival, unsigned int seek_lowval); -/* Machine memory configuration routine. */ - -/* This function returns a V0 format memory descriptor table, it has three - * entries. One for the total amount of physical ram on the machine, one - * for the amount of physical ram available, and one describing the virtual - * areas which are allocated by the prom. So, in a sense the physical - * available is a calculation of the total physical minus the physical mapped - * by the prom with virtual mappings. - * - * These lists are returned pre-sorted, this should make your life easier - * since the prom itself is way too lazy to do such nice things. - */ -extern struct linux_mem_v0 *prom_meminfo(void); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h index 39ccf2da297..1625a8c3e0d 100644 --- a/include/asm-sparc/page.h +++ b/include/asm-sparc/page.h @@ -38,12 +38,11 @@ /* The following structure is used to hold the physical * memory configuration of the machine. This is filled in - * probe_memory() and is later used by mem_init() to set up - * mem_map[]. We statically allocate SPARC_PHYS_BANKS of + * prom_meminit() and is later used by mem_init() to set up + * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of * these structs, this is arbitrary. The entry after the * last valid one has num_bytes==0. */ - struct sparc_phys_banks { unsigned long base_addr; unsigned long num_bytes; diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h index 19c97805111..213970477a2 100644 --- a/include/asm-sparc/psr.h +++ b/include/asm-sparc/psr.h @@ -25,6 +25,7 @@ #define PSR_PIL 0x00000f00 /* processor interrupt level */ #define PSR_EF 0x00001000 /* enable floating point */ #define PSR_EC 0x00002000 /* enable co-processor */ +#define PSR_SYSCALL 0x00004000 /* inside of a syscall */ #define PSR_LE 0x00008000 /* SuperSparcII little-endian */ #define PSR_ICC 0x00f00000 /* integer condition codes */ #define PSR_C 0x00100000 /* carry bit */ diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h index 8201a7b29d4..0afb867d6c1 100644 --- a/include/asm-sparc/ptrace.h +++ b/include/asm-sparc/ptrace.h @@ -10,6 +10,8 @@ #ifndef __ASSEMBLY__ +#include <linux/types.h> + struct pt_regs { unsigned long psr; unsigned long pc; @@ -39,6 +41,16 @@ struct pt_regs { #define UREG_FP UREG_I6 #define UREG_RETPC UREG_I7 +static inline bool pt_regs_is_syscall(struct pt_regs *regs) +{ + return (regs->psr & PSR_SYSCALL); +} + +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) +{ + return (regs->psr &= ~PSR_SYSCALL); +} + /* A register window */ struct reg_window { unsigned long locals[8]; @@ -149,6 +161,7 @@ extern void show_regs(struct pt_regs *); #define SF_XXARG 0x5c /* Stuff for the ptrace system call */ +#define PTRACE_SPARC_DETACH 11 #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 #define PTRACE_GETFPREGS 14 diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h index d03a21c97ab..94071c75701 100644 --- a/include/asm-sparc/signal.h +++ b/include/asm-sparc/signal.h @@ -199,13 +199,7 @@ typedef struct sigaltstack { size_t ss_size; } stack_t; -struct sparc_deliver_cookie { - int restart_syscall; - unsigned long orig_i0; -}; - -struct pt_regs; -extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); +#define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif /* !(__KERNEL__) */ diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h index 42fc6ed9815..1b08ef860a6 100644 --- a/include/asm-sparc/types.h +++ b/include/asm-sparc/types.h @@ -3,34 +3,18 @@ #define _SPARC_TYPES_H /* - * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space. - */ - -/* * This file is never included by application software unless * explicitly requested (e.g., via linux/types.h) in which case the * application is Linux specific so (user-) name space pollution is * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-ll64.h> #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -typedef __signed__ long long __s64; -typedef unsigned long long __u64; - #endif /* __ASSEMBLY__ */ #ifdef __KERNEL__ @@ -39,18 +23,6 @@ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef __signed__ char s8; -typedef unsigned char u8; - -typedef __signed__ short s16; -typedef unsigned short u16; - -typedef __signed__ int s32; -typedef unsigned int u32; - -typedef __signed__ long long s64; -typedef unsigned long long u64; - typedef u32 dma_addr_t; typedef u32 dma64_addr_t; diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h index 5590ce6bd07..3614ca04753 100644 --- a/include/asm-sparc64/psrcompat.h +++ b/include/asm-sparc64/psrcompat.h @@ -12,6 +12,7 @@ #define PSR_PIL 0x00000f00 /* processor interrupt level */ #define PSR_EF 0x00001000 /* enable floating point */ #define PSR_EC 0x00002000 /* enable co-processor */ +#define PSR_SYSCALL 0x00004000 /* inside of a syscall */ #define PSR_LE 0x00008000 /* SuperSparcII little-endian */ #define PSR_ICC 0x00f00000 /* integer condition codes */ #define PSR_C 0x00100000 /* carry bit */ @@ -30,6 +31,7 @@ static inline unsigned int tstate_to_psr(unsigned long tstate) PSR_S | ((tstate & TSTATE_ICC) >> 12) | ((tstate & TSTATE_XCC) >> 20) | + ((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) | PSR_V8PLUS); } diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h index f3c45484c63..949aebaf991 100644 --- a/include/asm-sparc64/pstate.h +++ b/include/asm-sparc64/pstate.h @@ -62,6 +62,7 @@ #define TSTATE_PRIV _AC(0x0000000000000400,UL) /* Privilege. */ #define TSTATE_IE _AC(0x0000000000000200,UL) /* Interrupt Enable. */ #define TSTATE_AG _AC(0x0000000000000100,UL) /* Alternate Globals.*/ +#define TSTATE_SYSCALL _AC(0x0000000000000020,UL) /* in syscall trap */ #define TSTATE_CWP _AC(0x000000000000001f,UL) /* Curr Win-Pointer. */ /* Floating-Point Registers State Register. diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h index 714b81956f3..90972a5ada5 100644 --- a/include/asm-sparc64/ptrace.h +++ b/include/asm-sparc64/ptrace.h @@ -42,16 +42,14 @@ static inline int pt_regs_trap_type(struct pt_regs *regs) return regs->magic & 0x1ff; } -static inline int pt_regs_clear_trap_type(struct pt_regs *regs) +static inline bool pt_regs_is_syscall(struct pt_regs *regs) { - return regs->magic &= ~0x1ff; + return (regs->tstate & TSTATE_SYSCALL); } -static inline bool pt_regs_is_syscall(struct pt_regs *regs) +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) { - int tt = pt_regs_trap_type(regs); - - return (tt == 0x110 || tt == 0x111 || tt == 0x16d); + return (regs->tstate &= ~TSTATE_SYSCALL); } struct pt_regs32 { @@ -298,6 +296,7 @@ extern void __show_regs(struct pt_regs *); #define SF_XXARG 0x5c /* Stuff for the ptrace system call */ +#define PTRACE_SPARC_DETACH 11 #define PTRACE_GETREGS 12 #define PTRACE_SETREGS 13 #define PTRACE_GETFPREGS 14 diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h index fa6f467389d..c49f32d3870 100644 --- a/include/asm-sparc64/signal.h +++ b/include/asm-sparc64/signal.h @@ -186,13 +186,7 @@ struct k_sigaction { void __user *ka_restorer; }; -struct signal_deliver_cookie { - int restart_syscall; - unsigned long orig_i0; -}; - -struct pt_regs; -extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie); +#define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif /* !(__KERNEL__) */ diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index 1b55538b944..52d67d39410 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -91,13 +91,14 @@ nop; #define SYSCALL_TRAP(routine, systbl) \ + rdpr %pil, %g2; \ + mov TSTATE_SYSCALL, %g3; \ sethi %hi(109f), %g7; \ - ba,pt %xcc, etrap; \ + ba,pt %xcc, etrap_syscall; \ 109: or %g7, %lo(109b), %g7; \ sethi %hi(systbl), %l7; \ ba,pt %xcc, routine; \ - or %l7, %lo(systbl), %l7; \ - nop; nop; + or %l7, %lo(systbl), %l7; #define TRAP_UTRAP(handler,lvl) \ mov handler, %g3; \ diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h index d0ee7f10583..5dbe04f4044 100644 --- a/include/asm-sparc64/types.h +++ b/include/asm-sparc64/types.h @@ -9,28 +9,12 @@ * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-l64.h> #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * _xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space. - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -typedef __signed__ long __s64; -typedef unsigned long __u64; - #endif /* __ASSEMBLY__ */ #ifdef __KERNEL__ @@ -39,18 +23,6 @@ typedef unsigned long __u64; #ifndef __ASSEMBLY__ -typedef __signed__ char s8; -typedef unsigned char u8; - -typedef __signed__ short s16; -typedef unsigned short u16; - -typedef __signed__ int s32; -typedef unsigned int u32; - -typedef __signed__ long s64; -typedef unsigned long u64; - /* Dma addresses come in generic and 64-bit flavours. */ typedef u32 dma_addr_t; diff --git a/include/asm-um/div64.h b/include/asm-um/div64.h index 7b73b2cd5b3..1e17f7409ca 100644 --- a/include/asm-um/div64.h +++ b/include/asm-um/div64.h @@ -3,5 +3,4 @@ #include "asm/arch/div64.h" -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); #endif diff --git a/include/asm-um/irq.h b/include/asm-um/irq.h index de389a477cd..4a2037f8204 100644 --- a/include/asm-um/irq.h +++ b/include/asm-um/irq.h @@ -15,8 +15,9 @@ #define SIGIO_WRITE_IRQ 11 #define TELNETD_IRQ 12 #define XTERM_IRQ 13 +#define RANDOM_IRQ 14 -#define LAST_IRQ XTERM_IRQ +#define LAST_IRQ RANDOM_IRQ #define NR_IRQS (LAST_IRQ + 1) #endif diff --git a/include/asm-um/keyboard.h b/include/asm-um/keyboard.h deleted file mode 100644 index ee2e2303d0e..00000000000 --- a/include/asm-um/keyboard.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __UM_KEYBOARD_H -#define __UM_KEYBOARD_H - -#include "asm/arch/keyboard.h" - -#endif diff --git a/include/asm-um/page.h b/include/asm-um/page.h index 381f96b1c82..916e1a61999 100644 --- a/include/asm-um/page.h +++ b/include/asm-um/page.h @@ -7,16 +7,20 @@ #ifndef __UM_PAGE_H #define __UM_PAGE_H -struct page; - -#include <linux/types.h> -#include <asm/vm-flags.h> +#include <linux/const.h> /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) +#ifndef __ASSEMBLY__ + +struct page; + +#include <linux/types.h> +#include <asm/vm-flags.h> + /* * These are used to make use of C type-checking.. */ @@ -120,4 +124,5 @@ extern struct page *arch_validate(struct page *page, gfp_t mask, int order); #include <asm-generic/memory_model.h> #include <asm-generic/page.h> -#endif +#endif /* __ASSEMBLY__ */ +#endif /* __UM_PAGE_H */ diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h index 284bda88211..89f735ee41d 100644 --- a/include/asm-v850/types.h +++ b/include/asm-v850/types.h @@ -10,28 +10,10 @@ * not a major issue. However, for interoperability, libraries still * need to be careful to avoid a name clashes. */ +#include <asm-generic/int-ll64.h> typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - #endif /* !__ASSEMBLY__ */ /* @@ -43,18 +25,6 @@ __extension__ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index b81a4d4d333..ee4b3ead6a4 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -23,13 +23,10 @@ #if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1) /* Technically wrong, but this avoids compilation errors on some gcc versions. */ -#define ADDR "=m" (*(volatile long *)addr) -#define BIT_ADDR "=m" (((volatile int *)addr)[nr >> 5]) +#define ADDR "=m" (*(volatile long *) addr) #else #define ADDR "+m" (*(volatile long *) addr) -#define BIT_ADDR "+m" (((volatile int *)addr)[nr >> 5]) #endif -#define BASE_ADDR "m" (*(volatile int *)addr) /** * set_bit - Atomically set a bit in memory @@ -77,7 +74,7 @@ static inline void __set_bit(int nr, volatile void *addr) */ static inline void clear_bit(int nr, volatile void *addr) { - asm volatile(LOCK_PREFIX "btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); } /* @@ -96,7 +93,7 @@ static inline void clear_bit_unlock(unsigned nr, volatile void *addr) static inline void __clear_bit(int nr, volatile void *addr) { - asm volatile("btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } /* @@ -131,7 +128,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) */ static inline void __change_bit(int nr, volatile void *addr) { - asm volatile("btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); } /** @@ -145,7 +142,7 @@ static inline void __change_bit(int nr, volatile void *addr) */ static inline void change_bit(int nr, volatile void *addr) { - asm volatile(LOCK_PREFIX "btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); } /** @@ -191,9 +188,10 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("bts %2,%3\n\t" - "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + asm("bts %2,%1\n\t" + "sbb %0,%0" + : "=r" (oldbit), ADDR + : "Ir" (nr)); return oldbit; } @@ -229,9 +227,10 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("btr %2,%3\n\t" + asm volatile("btr %2,%1\n\t" "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + : "=r" (oldbit), ADDR + : "Ir" (nr)); return oldbit; } @@ -240,9 +239,10 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) { int oldbit; - asm volatile("btc %2,%3\n\t" + asm volatile("btc %2,%1\n\t" "sbb %0,%0" - : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR); + : "=r" (oldbit), ADDR + : "Ir" (nr) : "memory"); return oldbit; } @@ -276,11 +276,10 @@ static inline int variable_test_bit(int nr, volatile const void *addr) { int oldbit; - asm volatile("bt %2,%3\n\t" + asm volatile("bt %2,%1\n\t" "sbb %0,%0" : "=r" (oldbit) - : "m" (((volatile const int *)addr)[nr >> 5]), - "Ir" (nr), BASE_ADDR); + : "m" (*(unsigned long *)addr), "Ir" (nr)); return oldbit; } @@ -397,8 +396,6 @@ static inline int fls(int x) } #endif /* __KERNEL__ */ -#undef BASE_ADDR -#undef BIT_ADDR #undef ADDR static inline void set_bit_string(unsigned long *bitmap, diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h index e8659909e5f..f62f4733606 100644 --- a/include/asm-x86/bootparam.h +++ b/include/asm-x86/bootparam.h @@ -14,10 +14,10 @@ /* extensible setup data list node */ struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; + __u64 next; + __u32 type; + __u32 len; + __u8 data[0]; }; struct setup_header { diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h index 0dbf8bf3ef0..9a2d644c08e 100644 --- a/include/asm-x86/div64.h +++ b/include/asm-x86/div64.h @@ -33,25 +33,25 @@ __mod; \ }) -/* - * (long)X = ((long long)divs) / (long)div - * (long)rem = ((long long)divs) % (long)div - * - * Warning, this will do an exception if X overflows. - */ -#define div_long_long_rem(a, b, c) div_ll_X_l_rem(a, b, c) - -static inline long div_ll_X_l_rem(long long divs, long div, long *rem) +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) { - long dum2; - asm("divl %2":"=a"(dum2), "=d"(*rem) - : "rm"(div), "A"(divs)); - - return dum2; - + union { + u64 v64; + u32 v32[2]; + } d = { dividend }; + u32 upper; + + upper = d.v32[1]; + d.v32[1] = 0; + if (upper >= divisor) { + d.v32[1] = upper / divisor; + upper %= divisor; + } + asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) : + "rm" (divisor), "0" (d.v32[0]), "1" (upper)); + return d.v64; } - -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); +#define div_u64_rem div_u64_rem #else # include <asm-generic/div64.h> diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h index 1241e6ad193..4edf7514a75 100644 --- a/include/asm-x86/dmi.h +++ b/include/asm-x86/dmi.h @@ -27,6 +27,7 @@ static inline void *dmi_alloc(unsigned len) #endif +/* Use early IO mappings for DMI because it's initialized early */ #define dmi_ioremap early_ioremap #define dmi_iounmap early_iounmap diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 7154dc4de95..6e6458853a3 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -185,16 +185,14 @@ static inline int is_geode(void) return (is_geode_gx() || is_geode_lx()); } -/* - * The VSA has virtual registers that we can query for a signature. - */ +#ifdef CONFIG_MGEODE_LX +extern int geode_has_vsa2(void); +#else static inline int geode_has_vsa2(void) { - outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); - outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - - return (inw(VSA_VRC_DATA) == VSA_SIG); + return 0; } +#endif /* MFGPTs */ diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index da2adb45f6e..6b722d31593 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -175,7 +175,15 @@ static inline int save_i387(struct _fpstate __user *buf) */ static inline int restore_i387(struct _fpstate __user *buf) { - set_used_math(); + struct task_struct *tsk = current; + int err; + + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + if (!(task_thread_info(current)->status & TS_USEDFPU)) { clts(); task_thread_info(current)->status |= TS_USEDFPU; diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h index 6e73467a4fb..049e81e797a 100644 --- a/include/asm-x86/io_32.h +++ b/include/asm-x86/io_32.h @@ -133,11 +133,6 @@ extern void *early_ioremap(unsigned long offset, unsigned long size); extern void early_iounmap(void *addr, unsigned long size); extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); -/* Use early IO mappings for DMI because it's initialized early */ -#define dmi_ioremap early_ioremap -#define dmi_iounmap early_iounmap -#define dmi_alloc alloc_bootmem - /* * ISA I/O bus memory addresses are 1:1 with the physical address. */ diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index 9d963cd6533..1d8cd01fa51 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -314,6 +314,9 @@ struct kvm_arch{ struct page *apic_access_page; gpa_t wall_clock; + + struct page *ept_identity_pagetable; + bool ept_identity_pagetable_done; }; struct kvm_vm_stat { @@ -422,6 +425,7 @@ struct kvm_x86_ops { struct kvm_run *run); int (*set_tss_addr)(struct kvm *kvm, unsigned int addr); + int (*get_tdp_level)(void); }; extern struct kvm_x86_ops *kvm_x86_ops; @@ -433,6 +437,9 @@ void kvm_mmu_destroy(struct kvm_vcpu *vcpu); int kvm_mmu_create(struct kvm_vcpu *vcpu); int kvm_mmu_setup(struct kvm_vcpu *vcpu); void kvm_mmu_set_nonpresent_ptes(u64 trap_pte, u64 notrap_pte); +void kvm_mmu_set_base_ptes(u64 base_pte); +void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask, + u64 dirty_mask, u64 nx_mask, u64 x_mask); int kvm_mmu_reset_context(struct kvm_vcpu *vcpu); void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot); @@ -620,7 +627,7 @@ static inline void fx_restore(struct i387_fxsave_struct *image) asm("fxrstor (%0)":: "r" (image)); } -static inline void fpu_init(void) +static inline void fx_finit(void) { asm("finit"); } @@ -644,6 +651,7 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code) #define ASM_VMX_VMWRITE_RSP_RDX ".byte 0x0f, 0x79, 0xd4" #define ASM_VMX_VMXOFF ".byte 0x0f, 0x01, 0xc4" #define ASM_VMX_VMXON_RAX ".byte 0xf3, 0x0f, 0xc7, 0x30" +#define ASM_VMX_INVEPT ".byte 0x66, 0x0f, 0x38, 0x80, 0x08" #define ASM_VMX_INVVPID ".byte 0x66, 0x0f, 0x38, 0x81, 0x08" #define MSR_IA32_TIME_STAMP_COUNTER 0x010 diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h index 8b822b5a178..88f60cc6a22 100644 --- a/include/asm-x86/pat.h +++ b/include/asm-x86/pat.h @@ -4,7 +4,13 @@ #include <linux/types.h> +#ifdef CONFIG_X86_PAT extern int pat_wc_enabled; +extern void validate_pat_support(struct cpuinfo_x86 *c); +#else +static const int pat_wc_enabled = 0; +static inline void validate_pat_support(struct cpuinfo_x86 *c) { } +#endif extern void pat_init(void); @@ -12,5 +18,7 @@ extern int reserve_memtype(u64 start, u64 end, unsigned long req_type, unsigned long *ret_type); extern int free_memtype(u64 start, u64 end); +extern void pat_disable(char *reason); + #endif diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h index 577ab79c4c2..d7f0403bbec 100644 --- a/include/asm-x86/pgtable_32.h +++ b/include/asm-x86/pgtable_32.h @@ -88,14 +88,7 @@ extern unsigned long pg0[]; /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val((x))) #define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT) - -extern int pmd_bad(pmd_t pmd); - -#define pmd_bad_v1(x) \ - (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER))) -#define pmd_bad_v2(x) \ - (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER | \ - _PAGE_PSE | _PAGE_NX))) +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index a3bbf8766c1..efe83dcbd41 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -158,14 +158,12 @@ static inline unsigned long pgd_bad(pgd_t pgd) static inline unsigned long pud_bad(pud_t pud) { - return pud_val(pud) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } static inline unsigned long pmd_bad(pmd_t pmd) { - return pmd_val(pmd) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } #define pte_none(x) (!pte_val((x))) diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h index bc6376f1bc5..21e89bf92f1 100644 --- a/include/asm-x86/spinlock.h +++ b/include/asm-x86/spinlock.h @@ -20,18 +20,8 @@ */ #ifdef CONFIG_X86_32 -typedef char _slock_t; -# define LOCK_INS_DEC "decb" -# define LOCK_INS_XCH "xchgb" -# define LOCK_INS_MOV "movb" -# define LOCK_INS_CMP "cmpb" # define LOCK_PTR_REG "a" #else -typedef int _slock_t; -# define LOCK_INS_DEC "decl" -# define LOCK_INS_XCH "xchgl" -# define LOCK_INS_MOV "movl" -# define LOCK_INS_CMP "cmpl" # define LOCK_PTR_REG "D" #endif @@ -66,14 +56,14 @@ typedef int _slock_t; #if (NR_CPUS < 256) static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 8) & 0xff) != (tmp & 0xff)); } static inline int __raw_spin_is_contended(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1; } @@ -130,14 +120,14 @@ static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock) #else static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 16) & 0xffff) != (tmp & 0xffff)); } static inline int __raw_spin_is_contended(raw_spinlock_t *lock) { - int tmp = *(volatile signed int *)(&(lock)->slock); + int tmp = ACCESS_ONCE(lock->slock); return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1; } diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index 4f35a0fb4f2..dcf3f8131d6 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -25,6 +25,16 @@ #ifndef _ASM_X86_TOPOLOGY_H #define _ASM_X86_TOPOLOGY_H +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_HT +# define ENABLE_TOPO_DEFINES +# endif +#else +# ifdef CONFIG_SMP +# define ENABLE_TOPO_DEFINES +# endif +#endif + #ifdef CONFIG_NUMA #include <linux/cpumask.h> #include <asm/mpspec.h> @@ -130,10 +140,6 @@ extern unsigned long node_end_pfn[]; extern unsigned long node_remap_size[]; #define node_has_online_mem(nid) (node_start_pfn[nid] != node_end_pfn[nid]) -# ifdef CONFIG_X86_HT -# define ENABLE_TOPO_DEFINES -# endif - # define SD_CACHE_NICE_TRIES 1 # define SD_IDLE_IDX 1 # define SD_NEWIDLE_IDX 2 @@ -141,10 +147,6 @@ extern unsigned long node_remap_size[]; #else -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif - # define SD_CACHE_NICE_TRIES 2 # define SD_IDLE_IDX 2 # define SD_NEWIDLE_IDX 2 diff --git a/include/asm-x86/types.h b/include/asm-x86/types.h index 63733f31568..1ac80cd9acf 100644 --- a/include/asm-x86/types.h +++ b/include/asm-x86/types.h @@ -1,34 +1,12 @@ #ifndef _ASM_X86_TYPES_H #define _ASM_X86_TYPES_H +#include <asm-generic/int-ll64.h> + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -/* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#ifdef __i386__ -# ifdef __GNUC__ -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -# endif -#else -typedef __signed__ long long __s64; -typedef unsigned long long __u64; -#endif - #endif /* __ASSEMBLY__ */ /* @@ -44,18 +22,6 @@ typedef unsigned long long __u64; #ifndef __ASSEMBLY__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - typedef u64 dma64_addr_t; #if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G) /* DMA addresses come in 32-bit and 64-bit flavours. */ diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h index b27d841a8eb..c89569a8da0 100644 --- a/include/asm-xtensa/types.h +++ b/include/asm-xtensa/types.h @@ -11,6 +11,7 @@ #ifndef _XTENSA_TYPES_H #define _XTENSA_TYPES_H +#include <asm-generic/int-ll64.h> #ifdef __ASSEMBLY__ # define __XTENSA_UL(x) (x) @@ -25,42 +26,10 @@ typedef unsigned short umode_t; /* - * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the - * header files exported to user space - */ - -typedef __signed__ char __s8; -typedef unsigned char __u8; - -typedef __signed__ short __s16; -typedef unsigned short __u16; - -typedef __signed__ int __s32; -typedef unsigned int __u32; - -#if defined(__GNUC__) -__extension__ typedef __signed__ long long __s64; -__extension__ typedef unsigned long long __u64; -#endif - -/* * These aren't exported outside the kernel to avoid name space clashes */ #ifdef __KERNEL__ -typedef __signed__ char s8; -typedef unsigned char u8; - -typedef __signed__ short s16; -typedef unsigned short u16; - -typedef __signed__ int s32; -typedef unsigned int u32; - -typedef __signed__ long long s64; -typedef unsigned long long u64; - - #define BITS_PER_LONG 32 /* Dma addresses are 32-bits wide. */ diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 224658b8d80..833d208c25d 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -57,10 +57,14 @@ static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num, struct scatterlist *sg2) { sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0); + sg1[num - 1].page_link &= ~0x02; } static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) { + if (sg_is_last(sg)) + return NULL; + return (++sg)->length ? sg : (void *)sg_page(sg); } diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 78fade0a1e3..b7d81b2a904 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -346,6 +346,11 @@ unifdef-y += videodev.h unifdef-y += virtio_config.h unifdef-y += virtio_blk.h unifdef-y += virtio_net.h +unifdef-y += virtio_9p.h +unifdef-y += virtio_balloon.h +unifdef-y += virtio_console.h +unifdef-y += virtio_pci.h +unifdef-y += virtio_ring.h unifdef-y += vt.h unifdef-y += wait.h unifdef-y += wanrouter.h diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h index b2e1ba325b9..6129e58ca7c 100644 --- a/include/linux/anon_inodes.h +++ b/include/linux/anon_inodes.h @@ -8,8 +8,7 @@ #ifndef _LINUX_ANON_INODES_H #define _LINUX_ANON_INODES_H -int anon_inode_getfd(int *pfd, struct inode **pinode, struct file **pfile, - const char *name, const struct file_operations *fops, +int anon_inode_getfd(const char *name, const struct file_operations *fops, void *priv); #endif /* _LINUX_ANON_INODES_H */ diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index 43b406def35..1abfe664c44 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -110,7 +110,6 @@ extern int __bitmap_weight(const unsigned long *bitmap, int bits); extern int bitmap_scnprintf(char *buf, unsigned int len, const unsigned long *src, int nbits); -extern int bitmap_scnprintf_len(unsigned int len); extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user, unsigned long *dst, int nbits); extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen, diff --git a/include/linux/calc64.h b/include/linux/calc64.h deleted file mode 100644 index ebf4b8f38d8..00000000000 --- a/include/linux/calc64.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef _LINUX_CALC64_H -#define _LINUX_CALC64_H - -#include <linux/types.h> -#include <asm/div64.h> - -/* - * This is a generic macro which is used when the architecture - * specific div64.h does not provide a optimized one. - * - * The 64bit dividend is divided by the divisor (data type long), the - * result is returned and the remainder stored in the variable - * referenced by remainder (data type long *). In contrast to the - * do_div macro the dividend is kept intact. - */ -#ifndef div_long_long_rem -#define div_long_long_rem(dividend, divisor, remainder) \ - do_div_llr((dividend), divisor, remainder) - -static inline unsigned long do_div_llr(const long long dividend, - const long divisor, long *remainder) -{ - u64 result = dividend; - - *(remainder) = do_div(result, divisor); - return (unsigned long) result; -} -#endif - -/* - * Sign aware variation of the above. On some architectures a - * negative dividend leads to an divide overflow exception, which - * is avoided by the sign check. - */ -static inline long div_long_long_rem_signed(const long long dividend, - const long divisor, long *remainder) -{ - long res; - - if (unlikely(dividend < 0)) { - res = -div_long_long_rem(-dividend, divisor, remainder); - *remainder = -(*remainder); - } else - res = div_long_long_rem(dividend, divisor, remainder); - - return res; -} - -#endif diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 35094479ca5..55e434feec9 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -93,6 +93,8 @@ struct clocksource { #endif }; +extern struct clocksource *clock; /* current clocksource */ + /* * Clock source flags bits:: */ diff --git a/include/linux/compat.h b/include/linux/compat.h index 8fa7857e153..cf8d11cad5a 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -65,10 +65,11 @@ struct compat_timex { compat_long_t calcnt; compat_long_t errcnt; compat_long_t stbcnt; + compat_int_t tai; compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; - compat_int_t :32; compat_int_t :32; compat_int_t :32; compat_int_t :32; + compat_int_t :32; compat_int_t :32; compat_int_t :32; }; #define _COMPAT_NSIG_WORDS (_COMPAT_NSIG / _COMPAT_NSIG_BPW) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index dcae0c8d97e..c8bd2daf95e 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -182,4 +182,16 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __section(S) __attribute__ ((__section__(#S))) #endif +/* + * Prevent the compiler from merging or refetching accesses. The compiler + * is also forbidden from reordering successive instances of ACCESS_ONCE(), + * but only when the compiler is aware of some particular ordering. One way + * to make the compiler aware of ordering is to put the two invocations of + * ACCESS_ONCE() in different C statements. + * + * This macro does absolutely -nothing- to prevent the CPU from reordering, + * merging, or refetching absolutely anything at any time. + */ +#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) + #endif /* __LINUX_COMPILER_H */ diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 9650806fe2e..5df3db58fcc 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -289,13 +289,6 @@ static inline int __cpumask_scnprintf(char *buf, int len, return bitmap_scnprintf(buf, len, srcp->bits, nbits); } -#define cpumask_scnprintf_len(len) \ - __cpumask_scnprintf_len((len)) -static inline int __cpumask_scnprintf_len(int len) -{ - return bitmap_scnprintf_len(len); -} - #define cpumask_parse_user(ubuf, ulen, dst) \ __cpumask_parse_user((ubuf), (ulen), &(dst), NR_CPUS) static inline int __cpumask_parse_user(const char __user *buf, int len, diff --git a/include/linux/device.h b/include/linux/device.h index 832fb0eb293..8c23e3dfe3a 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -380,6 +380,12 @@ struct device { /* Get the wakeup routines, which depend on struct device */ #include <linux/pm_wakeup.h> +static inline const char *dev_name(struct device *dev) +{ + /* will be changed into kobject_name(&dev->kobj) in the near future */ + return dev->bus_id; +} + #ifdef CONFIG_NUMA static inline int dev_to_node(struct device *dev) { @@ -478,7 +484,7 @@ extern void sysdev_shutdown(void); extern const char *dev_driver_string(struct device *dev); #define dev_printk(level, dev, format, arg...) \ printk(level "%s %s: " format , dev_driver_string(dev) , \ - (dev)->bus_id , ## arg) + dev_name(dev) , ## arg) #define dev_emerg(dev, format, arg...) \ dev_printk(KERN_EMERG , dev , format , ## arg) diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index de8387b7ceb..f5abd130663 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -33,6 +33,19 @@ enum fid_type { * 32 bit parent directory inode number. */ FILEID_INO32_GEN_PARENT = 2, + + /* + * 32 bit block number, 16 bit partition reference, + * 16 bit unused, 32 bit generation number. + */ + FILEID_UDF_WITHOUT_PARENT = 0x51, + + /* + * 32 bit block number, 16 bit partition reference, + * 16 bit unused, 32 bit generation number, + * 32 bit parent block number, 32 bit parent generation number + */ + FILEID_UDF_WITH_PARENT = 0x52, }; struct fid { @@ -43,6 +56,14 @@ struct fid { u32 parent_ino; u32 parent_gen; } i32; + struct { + u32 block; + u16 partref; + u16 parent_partref; + u32 generation; + u32 parent_block; + u32 parent_generation; + } udf; __u32 raw[0]; }; }; diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h new file mode 100644 index 00000000000..a118f3c0b24 --- /dev/null +++ b/include/linux/fdtable.h @@ -0,0 +1,99 @@ +/* + * descriptor table internals; you almost certainly want file.h instead. + */ + +#ifndef __LINUX_FDTABLE_H +#define __LINUX_FDTABLE_H + +#include <asm/atomic.h> +#include <linux/posix_types.h> +#include <linux/compiler.h> +#include <linux/spinlock.h> +#include <linux/rcupdate.h> +#include <linux/types.h> + +/* + * The default fd array needs to be at least BITS_PER_LONG, + * as this is the granularity returned by copy_fdset(). + */ +#define NR_OPEN_DEFAULT BITS_PER_LONG + +/* + * The embedded_fd_set is a small fd_set, + * suitable for most tasks (which open <= BITS_PER_LONG files) + */ +struct embedded_fd_set { + unsigned long fds_bits[1]; +}; + +struct fdtable { + unsigned int max_fds; + struct file ** fd; /* current fd array */ + fd_set *close_on_exec; + fd_set *open_fds; + struct rcu_head rcu; + struct fdtable *next; +}; + +/* + * Open file table structure + */ +struct files_struct { + /* + * read mostly part + */ + atomic_t count; + struct fdtable *fdt; + struct fdtable fdtab; + /* + * written part on a separate cache line in SMP + */ + spinlock_t file_lock ____cacheline_aligned_in_smp; + int next_fd; + struct embedded_fd_set close_on_exec_init; + struct embedded_fd_set open_fds_init; + struct file * fd_array[NR_OPEN_DEFAULT]; +}; + +#define files_fdtable(files) (rcu_dereference((files)->fdt)) + +extern struct kmem_cache *filp_cachep; + +struct file_operations; +struct vfsmount; +struct dentry; + +extern int expand_files(struct files_struct *, int nr); +extern void free_fdtable_rcu(struct rcu_head *rcu); +extern void __init files_defer_init(void); + +static inline void free_fdtable(struct fdtable *fdt) +{ + call_rcu(&fdt->rcu, free_fdtable_rcu); +} + +static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) +{ + struct file * file = NULL; + struct fdtable *fdt = files_fdtable(files); + + if (fd < fdt->max_fds) + file = rcu_dereference(fdt->fd[fd]); + return file; +} + +/* + * Check whether the specified fd has an open file. + */ +#define fcheck(fd) fcheck_files(current->files, fd) + +struct task_struct; + +struct files_struct *get_files_struct(struct task_struct *); +void put_files_struct(struct files_struct *fs); +void reset_files_struct(struct files_struct *); +int unshare_files(struct files_struct **); + +extern struct kmem_cache *files_cachep; + +#endif /* __LINUX_FDTABLE_H */ diff --git a/include/linux/file.h b/include/linux/file.h index 69baf5a4f0a..27c64bdc68c 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -5,59 +5,11 @@ #ifndef __LINUX_FILE_H #define __LINUX_FILE_H -#include <asm/atomic.h> -#include <linux/posix_types.h> #include <linux/compiler.h> -#include <linux/spinlock.h> -#include <linux/rcupdate.h> #include <linux/types.h> +#include <linux/posix_types.h> -/* - * The default fd array needs to be at least BITS_PER_LONG, - * as this is the granularity returned by copy_fdset(). - */ -#define NR_OPEN_DEFAULT BITS_PER_LONG - -/* - * The embedded_fd_set is a small fd_set, - * suitable for most tasks (which open <= BITS_PER_LONG files) - */ -struct embedded_fd_set { - unsigned long fds_bits[1]; -}; - -struct fdtable { - unsigned int max_fds; - struct file ** fd; /* current fd array */ - fd_set *close_on_exec; - fd_set *open_fds; - struct rcu_head rcu; - struct fdtable *next; -}; - -/* - * Open file table structure - */ -struct files_struct { - /* - * read mostly part - */ - atomic_t count; - struct fdtable *fdt; - struct fdtable fdtab; - /* - * written part on a separate cache line in SMP - */ - spinlock_t file_lock ____cacheline_aligned_in_smp; - int next_fd; - struct embedded_fd_set close_on_exec_init; - struct embedded_fd_set open_fds_init; - struct file * fd_array[NR_OPEN_DEFAULT]; -}; - -#define files_fdtable(files) (rcu_dereference((files)->fdt)) - -extern struct kmem_cache *filp_cachep; +struct file; extern void __fput(struct file *); extern void fput(struct file *); @@ -85,41 +37,7 @@ extern void put_filp(struct file *); extern int get_unused_fd(void); extern int get_unused_fd_flags(int flags); extern void put_unused_fd(unsigned int fd); -struct kmem_cache; - -extern int expand_files(struct files_struct *, int nr); -extern void free_fdtable_rcu(struct rcu_head *rcu); -extern void __init files_defer_init(void); - -static inline void free_fdtable(struct fdtable *fdt) -{ - call_rcu(&fdt->rcu, free_fdtable_rcu); -} - -static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) -{ - struct file * file = NULL; - struct fdtable *fdt = files_fdtable(files); - - if (fd < fdt->max_fds) - file = rcu_dereference(fdt->fd[fd]); - return file; -} - -/* - * Check whether the specified fd has an open file. - */ -#define fcheck(fd) fcheck_files(current->files, fd) extern void fd_install(unsigned int fd, struct file *file); -struct task_struct; - -struct files_struct *get_files_struct(struct task_struct *); -void put_files_struct(struct files_struct *fs); -void reset_files_struct(struct files_struct *); -int unshare_files(struct files_struct **); - -extern struct kmem_cache *files_cachep; - #endif /* __LINUX_FILE_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index a1ba005d08e..f413085f748 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1289,17 +1289,12 @@ extern ssize_t vfs_readv(struct file *, const struct iovec __user *, extern ssize_t vfs_writev(struct file *, const struct iovec __user *, unsigned long, loff_t *); -/* - * NOTE: write_inode, delete_inode, clear_inode, put_inode can be called - * without the big kernel lock held in all filesystems. - */ struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); void (*dirty_inode) (struct inode *); int (*write_inode) (struct inode *, int); - void (*put_inode) (struct inode *); void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); void (*put_super) (struct super_block *); @@ -1821,7 +1816,6 @@ extern void iget_failed(struct inode *); extern void clear_inode(struct inode *); extern void destroy_inode(struct inode *); extern struct inode *new_inode(struct super_block *); -extern int __remove_suid(struct dentry *, int); extern int should_remove_suid(struct dentry *); extern int remove_suid(struct dentry *); diff --git a/include/linux/fuse.h b/include/linux/fuse.h index 5c86f1196c3..d4828219769 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -109,6 +109,7 @@ struct fuse_file_lock { #define FUSE_POSIX_LOCKS (1 << 1) #define FUSE_FILE_OPS (1 << 2) #define FUSE_ATOMIC_O_TRUNC (1 << 3) +#define FUSE_BIG_WRITES (1 << 5) /** * Release flags diff --git a/include/linux/genhd.h b/include/linux/genhd.h index ecd2bf63fc8..e9874e7fcdf 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -178,17 +178,17 @@ static inline struct hd_struct *get_part(struct gendisk *gendiskp, static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) { int i; + for_each_possible_cpu(i) memset(per_cpu_ptr(gendiskp->dkstats, i), value, - sizeof (struct disk_stats)); + sizeof(struct disk_stats)); } #define __part_stat_add(part, field, addnd) \ (per_cpu_ptr(part->dkstats, smp_processor_id())->field += addnd) -#define __all_stat_add(gendiskp, field, addnd, sector) \ +#define __all_stat_add(gendiskp, part, field, addnd, sector) \ ({ \ - struct hd_struct *part = get_part(gendiskp, sector); \ if (part) \ __part_stat_add(part, field, addnd); \ __disk_stat_add(gendiskp, field, addnd); \ @@ -203,11 +203,13 @@ static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) { res; \ }) -static inline void part_stat_set_all(struct hd_struct *part, int value) { +static inline void part_stat_set_all(struct hd_struct *part, int value) +{ int i; + for_each_possible_cpu(i) memset(per_cpu_ptr(part->dkstats, i), value, - sizeof(struct disk_stats)); + sizeof(struct disk_stats)); } #else /* !CONFIG_SMP */ @@ -223,9 +225,8 @@ static inline void disk_stat_set_all(struct gendisk *gendiskp, int value) #define __part_stat_add(part, field, addnd) \ (part->dkstats.field += addnd) -#define __all_stat_add(gendiskp, field, addnd, sector) \ +#define __all_stat_add(gendiskp, part, field, addnd, sector) \ ({ \ - struct hd_struct *part = get_part(gendiskp, sector); \ if (part) \ part->dkstats.field += addnd; \ __disk_stat_add(gendiskp, field, addnd); \ @@ -276,10 +277,10 @@ static inline void part_stat_set_all(struct hd_struct *part, int value) #define part_stat_sub(gendiskp, field, subnd) \ part_stat_add(gendiskp, field, -subnd) -#define all_stat_add(gendiskp, field, addnd, sector) \ +#define all_stat_add(gendiskp, part, field, addnd, sector) \ do { \ preempt_disable(); \ - __all_stat_add(gendiskp, field, addnd, sector); \ + __all_stat_add(gendiskp, part, field, addnd, sector); \ preempt_enable(); \ } while (0) @@ -288,15 +289,15 @@ static inline void part_stat_set_all(struct hd_struct *part, int value) #define all_stat_dec(gendiskp, field, sector) \ all_stat_add(gendiskp, field, -1, sector) -#define __all_stat_inc(gendiskp, field, sector) \ - __all_stat_add(gendiskp, field, 1, sector) -#define all_stat_inc(gendiskp, field, sector) \ - all_stat_add(gendiskp, field, 1, sector) +#define __all_stat_inc(gendiskp, part, field, sector) \ + __all_stat_add(gendiskp, part, field, 1, sector) +#define all_stat_inc(gendiskp, part, field, sector) \ + all_stat_add(gendiskp, part, field, 1, sector) -#define __all_stat_sub(gendiskp, field, subnd, sector) \ - __all_stat_add(gendiskp, field, -subnd, sector) -#define all_stat_sub(gendiskp, field, subnd, sector) \ - all_stat_add(gendiskp, field, -subnd, sector) +#define __all_stat_sub(gendiskp, part, field, subnd, sector) \ + __all_stat_add(gendiskp, part, field, -subnd, sector) +#define all_stat_sub(gendiskp, part, field, subnd, sector) \ + all_stat_add(gendiskp, part, field, -subnd, sector) /* Inlines to alloc and free disk stats in struct gendisk */ #ifdef CONFIG_SMP diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 897f723bd22..181006cc94a 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -72,6 +72,14 @@ #define in_softirq() (softirq_count()) #define in_interrupt() (irq_count()) +#if defined(CONFIG_PREEMPT) +# define PREEMPT_INATOMIC_BASE kernel_locked() +# define PREEMPT_CHECK_OFFSET 1 +#else +# define PREEMPT_INATOMIC_BASE 0 +# define PREEMPT_CHECK_OFFSET 0 +#endif + /* * Are we running in atomic context? WARNING: this macro cannot * always detect atomic context; in particular, it cannot know about @@ -79,17 +87,11 @@ * used in the general case to determine whether sleeping is possible. * Do not use in_atomic() in driver code. */ -#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0) - -#ifdef CONFIG_PREEMPT -# define PREEMPT_CHECK_OFFSET 1 -#else -# define PREEMPT_CHECK_OFFSET 0 -#endif +#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_INATOMIC_BASE) /* * Check whether we were atomic before we did preempt_disable(): - * (used by the scheduler) + * (used by the scheduler, *after* releasing the kernel lock) */ #define in_atomic_preempt_off() \ ((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 31a4d653389..6d93dce61cb 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -316,6 +316,15 @@ static inline int hrtimer_is_queued(struct hrtimer *timer) (HRTIMER_STATE_ENQUEUED | HRTIMER_STATE_PENDING); } +/* + * Helper function to check, whether the timer is running the callback + * function + */ +static inline int hrtimer_callback_running(struct hrtimer *timer) +{ + return timer->state & HRTIMER_STATE_CALLBACK; +} + /* Forward a hrtimer so it expires after now: */ extern u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index cb63da5c213..6716ec808c5 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -262,7 +262,7 @@ i2c_new_probed_device(struct i2c_adapter *adap, * client handles for the extra addresses. */ extern struct i2c_client * -i2c_new_dummy(struct i2c_adapter *adap, u16 address, const char *type); +i2c_new_dummy(struct i2c_adapter *adap, u16 address); extern void i2c_unregister_device(struct i2c_client *); diff --git a/include/linux/init_task.h b/include/linux/init_task.h index bf6b8a61f8d..b24c2875aa0 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -1,7 +1,7 @@ #ifndef _LINUX__INIT_TASK_H #define _LINUX__INIT_TASK_H -#include <linux/file.h> +#include <linux/fdtable.h> #include <linux/rcupdate.h> #include <linux/irqflags.h> #include <linux/utsname.h> diff --git a/include/linux/io.h b/include/linux/io.h index 3a03a3604cc..6c7f0ba0d5f 100644 --- a/include/linux/io.h +++ b/include/linux/io.h @@ -65,5 +65,6 @@ void __iomem *devm_ioremap_nocache(struct device *dev, resource_size_t offset, void devm_iounmap(struct device *dev, void __iomem *addr); int check_signature(const volatile void __iomem *io_addr, const unsigned char *signature, int length); +void devm_ioremap_release(struct device *dev, void *res); #endif /* _LINUX_IO_H */ diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h index 2a3bb1bb743..f98a656b17e 100644 --- a/include/linux/ioprio.h +++ b/include/linux/ioprio.h @@ -68,6 +68,20 @@ static inline int task_nice_ioprio(struct task_struct *task) } /* + * This is for the case where the task hasn't asked for a specific IO class. + * Check for idle and rt task process, and return appropriate IO class. + */ +static inline int task_nice_ioclass(struct task_struct *task) +{ + if (task->policy == SCHED_IDLE) + return IOPRIO_CLASS_IDLE; + else if (task->policy == SCHED_FIFO || task->policy == SCHED_RR) + return IOPRIO_CLASS_RT; + else + return IOPRIO_CLASS_BE; +} + +/* * For inheritance, return the highest of the two given priorities */ extern int ioprio_best(unsigned short aprio, unsigned short bprio); diff --git a/include/linux/irq.h b/include/linux/irq.h index 1883a85625d..552e0ec269c 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -61,6 +61,7 @@ typedef void (*irq_flow_handler_t)(unsigned int irq, #define IRQ_WAKEUP 0x00100000 /* IRQ triggers system wakeup */ #define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */ #define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */ +#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */ #ifdef CONFIG_IRQ_PER_CPU # define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU) diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 33ef710dac2..abb6ac639e8 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -1,7 +1,7 @@ #ifndef _LINUX_JIFFIES_H #define _LINUX_JIFFIES_H -#include <linux/calc64.h> +#include <linux/math64.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/time.h> diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h index 9757b1a6d9d..6adcc297e35 100644 --- a/include/linux/kgdb.h +++ b/include/linux/kgdb.h @@ -261,10 +261,12 @@ struct kgdb_io { extern struct kgdb_arch arch_kgdb_ops; +extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs); + extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops); extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops); -extern int kgdb_hex2long(char **ptr, long *long_val); +extern int kgdb_hex2long(char **ptr, unsigned long *long_val); extern int kgdb_mem2hex(char *mem, char *buf, int count); extern int kgdb_hex2mem(char *buf, char *mem, int count); diff --git a/include/linux/libata.h b/include/linux/libata.h index d1dfe872ee3..0f17643e0a6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1039,6 +1039,7 @@ extern void ata_eh_thaw_port(struct ata_port *ap); extern void ata_eh_qc_complete(struct ata_queued_cmd *qc); extern void ata_eh_qc_retry(struct ata_queued_cmd *qc); +extern void ata_eh_analyze_ncq_error(struct ata_link *link); extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, @@ -1381,6 +1382,18 @@ static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host) return *(struct ata_port **)&host->hostdata[0]; } +static inline int ata_check_ready(u8 status) +{ + if (!(status & ATA_BUSY)) + return 1; + + /* 0xff indicates either no device or device not ready */ + if (status == 0xff) + return -ENODEV; + + return 0; +} + /************************************************************************** * PMP - drivers/ata/libata-pmp.c diff --git a/include/linux/math64.h b/include/linux/math64.h new file mode 100644 index 00000000000..c1a5f81501f --- /dev/null +++ b/include/linux/math64.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_MATH64_H +#define _LINUX_MATH64_H + +#include <linux/types.h> +#include <asm/div64.h> + +#if BITS_PER_LONG == 64 + +/** + * div_u64_rem - unsigned 64bit divide with 32bit divisor with remainder + * + * This is commonly provided by 32bit archs to provide an optimized 64bit + * divide. + */ +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** + * div_s64_rem - signed 64bit divide with 32bit divisor with remainder + */ +static inline s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder) +{ + *remainder = dividend % divisor; + return dividend / divisor; +} + +/** + * div64_u64 - unsigned 64bit divide with 64bit divisor + */ +static inline u64 div64_u64(u64 dividend, u64 divisor) +{ + return dividend / divisor; +} + +#elif BITS_PER_LONG == 32 + +#ifndef div_u64_rem +static inline u64 div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + *remainder = do_div(dividend, divisor); + return dividend; +} +#endif + +#ifndef div_s64_rem +extern s64 div_s64_rem(s64 dividend, s32 divisor, s32 *remainder); +#endif + +#ifndef div64_u64 +extern u64 div64_u64(u64 dividend, u64 divisor); +#endif + +#endif /* BITS_PER_LONG */ + +/** + * div_u64 - unsigned 64bit divide with 32bit divisor + * + * This is the most common 64bit divide and should be used if possible, + * as many 32bit archs can optimize this variant better than a full 64bit + * divide. + */ +#ifndef div_u64 +static inline u64 div_u64(u64 dividend, u32 divisor) +{ + u32 remainder; + return div_u64_rem(dividend, divisor, &remainder); +} +#endif + +/** + * div_s64 - signed 64bit divide with 32bit divisor + */ +#ifndef div_s64 +static inline s64 div_s64(s64 dividend, s32 divisor) +{ + s32 remainder; + return div_s64_rem(dividend, divisor, &remainder); +} +#endif + +#endif /* _LINUX_MATH64_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index eb7c16cc955..02a27ae7853 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -226,8 +226,17 @@ struct mm_struct { rwlock_t ioctx_list_lock; /* aio lock */ struct kioctx *ioctx_list; #ifdef CONFIG_MM_OWNER - struct task_struct *owner; /* The thread group leader that */ - /* owns the mm_struct. */ + /* + * "owner" points to a task that is regarded as the canonical + * user/owner of this mm. All of the following must be true in + * order for it to be changed: + * + * current == mm->owner + * current->mm != mm + * new_owner->mm == mm + * new_owner->alloc_lock is held + */ + struct task_struct *owner; #endif #ifdef CONFIG_PROC_FS diff --git a/include/linux/module.h b/include/linux/module.h index 819c4e889bf..3e03b1acbc9 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -190,7 +190,7 @@ void *__symbol_get_gpl(const char *symbol); extern typeof(sym) sym; \ __CRC_SYMBOL(sym, sec) \ static const char __kstrtab_##sym[] \ - __attribute__((section("__ksymtab_strings"))) \ + __attribute__((section("__ksymtab_strings"), aligned(1))) \ = MODULE_SYMBOL_PREFIX #sym; \ static const struct kernel_symbol __ksymtab_##sym \ __used \ @@ -229,23 +229,6 @@ enum module_state MODULE_STATE_GOING, }; -/* Similar stuff for section attributes. */ -struct module_sect_attr -{ - struct module_attribute mattr; - char *name; - unsigned long address; -}; - -struct module_sect_attrs -{ - struct attribute_group grp; - int nsections; - struct module_sect_attr attrs[0]; -}; - -struct module_param_attrs; - struct module { enum module_state state; diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h deleted file mode 100644 index 9006feb218b..00000000000 --- a/include/linux/mtd/jedec.h +++ /dev/null @@ -1,66 +0,0 @@ - -/* JEDEC Flash Interface. - * This is an older type of interface for self programming flash. It is - * commonly use in older AMD chips and is obsolete compared with CFI. - * It is called JEDEC because the JEDEC association distributes the ID codes - * for the chips. - * - * See the AMD flash databook for information on how to operate the interface. - * - * $Id: jedec.h,v 1.4 2005/11/07 11:14:54 gleixner Exp $ - */ - -#ifndef __LINUX_MTD_JEDEC_H__ -#define __LINUX_MTD_JEDEC_H__ - -#include <linux/types.h> - -#define MAX_JEDEC_CHIPS 16 - -// Listing of all supported chips and their information -struct JEDECTable -{ - __u16 jedec; - char *name; - unsigned long size; - unsigned long sectorsize; - __u32 capabilities; -}; - -// JEDEC being 0 is the end of the chip array -struct jedec_flash_chip -{ - __u16 jedec; - unsigned long size; - unsigned long sectorsize; - - // *(__u8*)(base + (adder << addrshift)) = data << datashift - // Address size = size << addrshift - unsigned long base; // Byte 0 of the flash, will be unaligned - unsigned int datashift; // Useful for 32bit/16bit accesses - unsigned int addrshift; - unsigned long offset; // linerized start. base==offset for unbanked, uninterleaved flash - - __u32 capabilities; - - // These markers are filled in by the flash_chip_scan function - unsigned long start; - unsigned long length; -}; - -struct jedec_private -{ - unsigned long size; // Total size of all the devices - - /* Bank handling. If sum(bank_fill) == size then this is linear flash. - Otherwise the mapping has holes in it. bank_fill may be used to - find the holes, but in the common symetric case - bank_fill[0] == bank_fill[*], thus addresses may be computed - mathmatically. bank_fill must be powers of two */ - unsigned is_banked; - unsigned long bank_fill[MAX_JEDEC_CHIPS]; - - struct jedec_flash_chip chips[MAX_JEDEC_CHIPS]; -}; - -#endif diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 0a13bb35f04..245f9098e17 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -143,10 +143,12 @@ struct mtd_info { int (*erase) (struct mtd_info *mtd, struct erase_info *instr); /* This stuff for eXecute-In-Place */ - int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); + /* phys is optional and may be set to NULL */ + int (*point) (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ - void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); + void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len); int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h index a7f6d20ad40..5cc070c24d8 100644 --- a/include/linux/mtd/pmc551.h +++ b/include/linux/mtd/pmc551.h @@ -36,8 +36,9 @@ struct mypriv { * Function Prototypes */ static int pmc551_erase(struct mtd_info *, struct erase_info *); -static void pmc551_unpoint(struct mtd_info *, u_char *, loff_t, size_t); -static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); +static void pmc551_unpoint(struct mtd_info *, loff_t, size_t); +static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index 2e5a9673204..bd2a870ec29 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -14,11 +14,7 @@ #include <linux/i2c.h> -#ifdef CONFIG_OF_I2C - void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node); -#endif /* CONFIG_OF_I2C */ - #endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 96acd0dae24..509159bcd4e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -44,6 +44,7 @@ #include <linux/mod_devicetable.h> #include <linux/types.h> +#include <linux/init.h> #include <linux/ioport.h> #include <linux/list.h> #include <linux/compiler.h> @@ -474,7 +475,7 @@ extern struct pci_bus *pci_find_bus(int domain, int busnr); void pci_bus_add_devices(struct pci_bus *bus); struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); -static inline struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, +static inline struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata) { struct pci_bus *root_bus; @@ -666,7 +667,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, void pci_walk_bus(struct pci_bus *top, void (*cb)(struct pci_dev *, void *), void *userdata); -int pci_cfg_space_size_ext(struct pci_dev *dev, unsigned check_exp_pcix); +int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index e5a53daf17f..cf6dbd75939 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1429,6 +1429,7 @@ #define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 #define PCI_DEVICE_ID_NEO_2RJ45 0x00CA #define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB +#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4 #define PCI_VENDOR_ID_XIRCOM 0x115d #define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index 225beb13680..cb7d10f3076 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -16,10 +16,14 @@ #define PDA_POWER_CHARGE_AC (1 << 0) #define PDA_POWER_CHARGE_USB (1 << 1) +struct device; + struct pda_power_pdata { + int (*init)(struct device *dev); int (*is_ac_online)(void); int (*is_usb_online)(void); void (*set_charge)(int flags); + void (*exit)(struct device *dev); char **supplied_to; size_t num_supplicants; diff --git a/include/linux/poll.h b/include/linux/poll.h index 16d813b364e..ef453828877 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -117,6 +117,8 @@ void zero_fd_set(unsigned long nr, unsigned long *fdset) extern int do_select(int n, fd_set_bits *fds, s64 *timeout); extern int do_sys_poll(struct pollfd __user * ufds, unsigned int nfds, s64 *timeout); +extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp, + fd_set __user *exp, s64 *timeout); #endif /* KERNEL */ diff --git a/include/linux/quota.h b/include/linux/quota.h index 52e49dce658..dcddfb20094 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -347,6 +347,9 @@ struct quota_info { ((type) == USRQUOTA ? (sb_dqopt(sb)->flags & DQUOT_USR_SUSPENDED) : \ (sb_dqopt(sb)->flags & DQUOT_GRP_SUSPENDED)) +#define sb_any_quota_suspended(sb) (sb_has_quota_suspended(sb, USRQUOTA) | \ + sb_has_quota_suspended(sb, GRPQUOTA)) + int register_quota_format(struct quota_format_type *fmt); void unregister_quota_format(struct quota_format_type *fmt); diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 8082d6587a0..d42dbec0608 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -131,18 +131,6 @@ struct rcu_head { */ #define rcu_read_unlock_bh() __rcu_read_unlock_bh() -/* - * Prevent the compiler from merging or refetching accesses. The compiler - * is also forbidden from reordering successive instances of ACCESS_ONCE(), - * but only when the compiler is aware of some particular ordering. One way - * to make the compiler aware of ordering is to put the two invocations of - * ACCESS_ONCE() in different C statements. - * - * This macro does absolutely -nothing- to prevent the CPU from reordering, - * merging, or refetching absolutely anything at any time. - */ -#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) - /** * rcu_dereference - fetch an RCU-protected pointer in an * RCU read-side critical section. This pointer may later diff --git a/include/linux/rio.h b/include/linux/rio.h index c1c99c9643d..dc0c75556c6 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -161,6 +161,8 @@ enum rio_phy_type { * @ops: configuration space functions * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type + * @sys_size: RapidIO common transport system size + * @phy_type: RapidIO phy type * @name: Port name string * @priv: Master port private data */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 03c238088ae..5395a6176f4 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -158,6 +158,8 @@ print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) } #endif +extern unsigned long long time_sync_thresh; + /* * Task state bitmask. NOTE! These bits are also * encoded in fs/proc/array.c: get_task_state(). @@ -1551,6 +1553,35 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask) extern unsigned long long sched_clock(void); +#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK +static inline void sched_clock_init(void) +{ +} + +static inline u64 sched_clock_cpu(int cpu) +{ + return sched_clock(); +} + +static inline void sched_clock_tick(void) +{ +} + +static inline void sched_clock_idle_sleep_event(void) +{ +} + +static inline void sched_clock_idle_wakeup_event(u64 delta_ns) +{ +} +#else +extern void sched_clock_init(void); +extern u64 sched_clock_cpu(int cpu); +extern void sched_clock_tick(void); +extern void sched_clock_idle_sleep_event(void); +extern void sched_clock_idle_wakeup_event(u64 delta_ns); +#endif + /* * For kernel-internal use: high-speed (but slightly incorrect) per-cpu * clock constructed from sched_clock(): @@ -1977,6 +2008,11 @@ static inline void clear_tsk_need_resched(struct task_struct *tsk) clear_tsk_thread_flag(tsk,TIF_NEED_RESCHED); } +static inline int test_tsk_need_resched(struct task_struct *tsk) +{ + return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED)); +} + static inline int signal_pending(struct task_struct *p) { return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); @@ -2001,13 +2037,13 @@ static inline int need_resched(void) * cond_resched_lock() will drop the spinlock before scheduling, * cond_resched_softirq() will enable bhs before scheduling. */ -#ifdef CONFIG_PREEMPT +extern int _cond_resched(void); +#ifdef CONFIG_PREEMPT_BKL static inline int cond_resched(void) { return 0; } #else -extern int _cond_resched(void); static inline int cond_resched(void) { return _cond_resched(); @@ -2015,6 +2051,10 @@ static inline int cond_resched(void) #endif extern int cond_resched_lock(spinlock_t * lock); extern int cond_resched_softirq(void); +static inline int cond_resched_bkl(void) +{ + return _cond_resched(); +} /* * Does a critical section need to be broken due to another diff --git a/include/linux/string.h b/include/linux/string.h index c5d3fcad7b5..efdc44593b5 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -109,5 +109,7 @@ extern void *kmemdup(const void *src, size_t len, gfp_t gfp); extern char **argv_split(gfp_t gfp, const char *str, int *argcp); extern void argv_free(char **argv); +extern bool sysfs_streq(const char *s1, const char *s2); + #endif #endif /* _LINUX_STRING_H_ */ diff --git a/include/linux/timex.h b/include/linux/timex.h index 8ea3e71ba7f..fc6035d29d5 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -58,6 +58,8 @@ #include <asm/param.h> +#define NTP_API 4 /* NTP API version */ + /* * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen * for a slightly underdamped convergence characteristic. SHIFT_KH @@ -74,24 +76,22 @@ #define MAXTC 10 /* maximum time constant (shift) */ /* - * The SHIFT_UPDATE define establishes the decimal point of the - * time_offset variable which represents the current offset with - * respect to standard time. - * * SHIFT_USEC defines the scaling (shift) of the time_freq and * time_tolerance variables, which represent the current frequency * offset and maximum frequency tolerance. */ -#define SHIFT_UPDATE (SHIFT_HZ + 1) /* time offset scale (shift) */ #define SHIFT_USEC 16 /* frequency offset scale (shift) */ -#define SHIFT_NSEC 12 /* kernel frequency offset scale */ - -#define MAXPHASE 512000L /* max phase error (us) */ -#define MAXFREQ (512L << SHIFT_USEC) /* max frequency error (ppm) */ -#define MAXFREQ_NSEC (512000L << SHIFT_NSEC) /* max frequency error (ppb) */ +#define PPM_SCALE (NSEC_PER_USEC << (NTP_SCALE_SHIFT - SHIFT_USEC)) +#define PPM_SCALE_INV_SHIFT 20 +#define PPM_SCALE_INV ((1ll << (PPM_SCALE_INV_SHIFT + NTP_SCALE_SHIFT)) / \ + PPM_SCALE + 1) + +#define MAXPHASE 500000000l /* max phase error (ns) */ +#define MAXFREQ 500000 /* max frequency error (ns/s) */ +#define MAXFREQ_SCALED ((s64)MAXFREQ << NTP_SCALE_SHIFT) #define MINSEC 256 /* min interval between updates (s) */ #define MAXSEC 2048 /* max interval between updates (s) */ -#define NTP_PHASE_LIMIT (MAXPHASE << 5) /* beyond max. dispersion */ +#define NTP_PHASE_LIMIT ((MAXPHASE / NSEC_PER_USEC) << 5) /* beyond max. dispersion */ /* * syscall interface - used (mainly by NTP daemon) @@ -121,9 +121,11 @@ struct timex { long errcnt; /* calibration errors (ro) */ long stbcnt; /* stability limit exceeded (ro) */ + int tai; /* TAI offset (ro) */ + int :32; int :32; int :32; int :32; int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; + int :32; int :32; int :32; }; /* @@ -135,6 +137,9 @@ struct timex { #define ADJ_ESTERROR 0x0008 /* estimated time error */ #define ADJ_STATUS 0x0010 /* clock status */ #define ADJ_TIMECONST 0x0020 /* pll time constant */ +#define ADJ_TAI 0x0080 /* set TAI offset */ +#define ADJ_MICRO 0x1000 /* select microsecond resolution */ +#define ADJ_NANO 0x2000 /* select nanosecond resolution */ #define ADJ_TICK 0x4000 /* tick value */ #define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ #define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ @@ -146,8 +151,6 @@ struct timex { #define MOD_ESTERROR ADJ_ESTERROR #define MOD_STATUS ADJ_STATUS #define MOD_TIMECONST ADJ_TIMECONST -#define MOD_CLKB ADJ_TICK -#define MOD_CLKA ADJ_OFFSET_SINGLESHOT /* 0x8000 in original */ /* @@ -169,9 +172,13 @@ struct timex { #define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ #define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ +#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ +#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ +#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ +/* read-only bits */ #define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ - STA_PPSERROR | STA_CLOCKERR) /* read-only bits */ + STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) /* * Clock states (time_state) @@ -203,10 +210,9 @@ extern int time_status; /* clock synchronization status bits */ extern long time_maxerror; /* maximum error */ extern long time_esterror; /* estimated error */ -extern long time_freq; /* frequency offset (scaled ppm) */ - extern long time_adjust; /* The amount of adjtime left */ +extern void ntp_init(void); extern void ntp_clear(void); /** @@ -225,7 +231,7 @@ static inline int ntp_synced(void) __x < 0 ? -(-__x >> __s) : __x >> __s; \ }) -#define TICK_LENGTH_SHIFT 32 +#define NTP_SCALE_SHIFT 32 #ifdef CONFIG_NO_HZ #define NTP_INTERVAL_FREQ (2) @@ -234,8 +240,8 @@ static inline int ntp_synced(void) #endif #define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ) -/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */ -extern u64 current_tick_length(void); +/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */ +extern u64 tick_length; extern void second_overflow(void); extern void update_ntp_one_tick(void); diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h new file mode 100644 index 00000000000..83c6b45470c --- /dev/null +++ b/include/linux/usb/c67x00.h @@ -0,0 +1,48 @@ +/* + * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip + * + * Copyright (C) 2006-2008 Barco N.V. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +#ifndef _LINUX_USB_C67X00_H +#define _LINUX_USB_C67X00_H + +/* SIE configuration */ +#define C67X00_SIE_UNUSED 0 +#define C67X00_SIE_HOST 1 +#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */ +#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */ + +#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3) + +#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0) +#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0) +#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0) +#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0) + +#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4) +#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4) +#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4) +#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4) + +struct c67x00_platform_data { + int sie_config; /* SIEs config (C67X00_SIEx_*) */ + unsigned long hpi_regstep; /* Step between HPI registers */ +}; + +#endif /* _LINUX_USB_C67X00_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 7e0d3084f76..73a2f4eb1f7 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -455,7 +455,7 @@ struct usb_encryption_descriptor { /*-------------------------------------------------------------------------*/ -/* USB_DT_BOS: group of wireless capabilities */ +/* USB_DT_BOS: group of device-level capabilities */ struct usb_bos_descriptor { __u8 bLength; __u8 bDescriptorType; @@ -501,6 +501,16 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bReserved; } __attribute__((packed)); +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +} __attribute__((packed)); + /*-------------------------------------------------------------------------*/ /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index d8128f7102c..cf468fbdbf8 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -114,6 +114,8 @@ struct usb_ep_ops { int (*dequeue) (struct usb_ep *ep, struct usb_request *req); int (*set_halt) (struct usb_ep *ep, int value); + int (*set_wedge) (struct usb_ep *ep); + int (*fifo_status) (struct usb_ep *ep); void (*fifo_flush) (struct usb_ep *ep); }; @@ -349,6 +351,25 @@ static inline int usb_ep_clear_halt(struct usb_ep *ep) } /** + * usb_ep_set_wedge - sets the halt feature and ignores clear requests + * @ep: the endpoint being wedged + * + * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) + * requests. If the gadget driver clears the halt status, it will + * automatically unwedge the endpoint. + * + * Returns zero on success, else negative errno. + */ +static inline int +usb_ep_set_wedge(struct usb_ep *ep) +{ + if (ep->ops->set_wedge) + return ep->ops->set_wedge(ep); + else + return ep->ops->set_halt(ep, 1); +} + +/** * usb_ep_fifo_status - returns number of bytes in fifo, or error * @ep: the endpoint whose fifo status is being checked. * diff --git a/include/linux/vermagic.h b/include/linux/vermagic.h index 4d0909e5359..79b9837d9ca 100644 --- a/include/linux/vermagic.h +++ b/include/linux/vermagic.h @@ -17,6 +17,11 @@ #else #define MODULE_VERMAGIC_MODULE_UNLOAD "" #endif +#ifdef CONFIG_MODVERSIONS +#define MODULE_VERMAGIC_MODVERSIONS "modversions " +#else +#define MODULE_VERMAGIC_MODVERSIONS "" +#endif #ifndef MODULE_ARCH_VERMAGIC #define MODULE_ARCH_VERMAGIC "" #endif @@ -24,5 +29,6 @@ #define VERMAGIC_STRING \ UTS_RELEASE " " \ MODULE_VERMAGIC_SMP MODULE_VERMAGIC_PREEMPT \ - MODULE_VERMAGIC_MODULE_UNLOAD MODULE_ARCH_VERMAGIC + MODULE_VERMAGIC_MODULE_UNLOAD MODULE_VERMAGIC_MODVERSIONS \ + MODULE_ARCH_VERMAGIC diff --git a/include/linux/virtio.h b/include/linux/virtio.h index e7d10845b3c..06005fa9e98 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -76,6 +76,7 @@ struct virtqueue_ops { * @dev: underlying device. * @id: the device type identification (used to match it with a driver). * @config: the configuration ops for this device. + * @features: the features supported by both driver and device. * @priv: private pointer for the driver's use. */ struct virtio_device @@ -84,6 +85,8 @@ struct virtio_device struct device dev; struct virtio_device_id id; struct virtio_config_ops *config; + /* Note that this is a Linux set_bit-style bitmap. */ + unsigned long features[1]; void *priv; }; @@ -94,6 +97,8 @@ void unregister_virtio_device(struct virtio_device *dev); * virtio_driver - operations for a virtio I/O driver * @driver: underlying device driver (populate name and owner). * @id_table: the ids serviced by this driver. + * @feature_table: an array of feature numbers supported by this device. + * @feature_table_size: number of entries in the feature table array. * @probe: the function to call when a device is found. Returns a token for * remove, or PTR_ERR(). * @remove: the function when a device is removed. @@ -103,6 +108,8 @@ void unregister_virtio_device(struct virtio_device *dev); struct virtio_driver { struct device_driver driver; const struct virtio_device_id *id_table; + const unsigned int *feature_table; + unsigned int feature_table_size; int (*probe)(struct virtio_device *dev); void (*remove)(struct virtio_device *dev); void (*config_changed)(struct virtio_device *dev); diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index bca0b10d794..d4695a3356d 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -9,6 +9,7 @@ #define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ +#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ struct virtio_blk_config { @@ -18,6 +19,12 @@ struct virtio_blk_config __le32 size_max; /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ __le32 seg_max; + /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */ + struct virtio_blk_geometry { + __le16 cylinders; + __u8 heads; + __u8 sectors; + } geometry; } __attribute__((packed)); /* These two define direction. */ @@ -41,13 +48,8 @@ struct virtio_blk_outhdr __u64 sector; }; +/* And this is the final byte of the write scatter-gather list. */ #define VIRTIO_BLK_S_OK 0 #define VIRTIO_BLK_S_IOERR 1 #define VIRTIO_BLK_S_UNSUPP 2 - -/* This is the first element of the write scatter-gather list */ -struct virtio_blk_inhdr -{ - unsigned char status; -}; #endif /* _LINUX_VIRTIO_BLK_H */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index d581b2914b3..50db245c81a 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -16,27 +16,20 @@ #define VIRTIO_CONFIG_S_FAILED 0x80 #ifdef __KERNEL__ -struct virtio_device; +#include <linux/virtio.h> /** * virtio_config_ops - operations for configuring a virtio device - * @feature: search for a feature in this config - * vdev: the virtio_device - * bit: the feature bit - * Returns true if the feature is supported. Acknowledges the feature - * so the host can see it. * @get: read the value of a configuration field * vdev: the virtio_device * offset: the offset of the configuration field * buf: the buffer to write the field value into. * len: the length of the buffer - * Note that contents are conventionally little-endian. * @set: write the value of a configuration field * vdev: the virtio_device * offset: the offset of the configuration field * buf: the buffer to read the field value from. * len: the length of the buffer - * Note that contents are conventionally little-endian. * @get_status: read the status byte * vdev: the virtio_device * Returns the status byte @@ -52,10 +45,15 @@ struct virtio_device; * callback: the virqtueue callback * Returns the new virtqueue or ERR_PTR() (eg. -ENOENT). * @del_vq: free a virtqueue found by find_vq(). + * @get_features: get the array of feature bits for this device. + * vdev: the virtio_device + * Returns the first 32 feature bits (all we currently need). + * @set_features: confirm what device features we'll be using. + * vdev: the virtio_device + * feature: the first 32 feature bits */ struct virtio_config_ops { - bool (*feature)(struct virtio_device *vdev, unsigned bit); void (*get)(struct virtio_device *vdev, unsigned offset, void *buf, unsigned len); void (*set)(struct virtio_device *vdev, unsigned offset, @@ -67,43 +65,52 @@ struct virtio_config_ops unsigned index, void (*callback)(struct virtqueue *)); void (*del_vq)(struct virtqueue *vq); + u32 (*get_features)(struct virtio_device *vdev); + void (*set_features)(struct virtio_device *vdev, u32 features); }; +/* If driver didn't advertise the feature, it will never appear. */ +void virtio_check_driver_offered_feature(const struct virtio_device *vdev, + unsigned int fbit); + /** - * virtio_config_val - look for a feature and get a single virtio config. - * @vdev: the virtio device + * virtio_has_feature - helper to determine if this device has this feature. + * @vdev: the device * @fbit: the feature bit - * @offset: the type to search for. - * @val: a pointer to the value to fill in. - * - * The return value is -ENOENT if the feature doesn't exist. Otherwise - * the value is endian-corrected and returned in v. */ -#define virtio_config_val(vdev, fbit, offset, v) ({ \ - int _err; \ - if ((vdev)->config->feature((vdev), (fbit))) { \ - __virtio_config_val((vdev), (offset), (v)); \ - _err = 0; \ - } else \ - _err = -ENOENT; \ - _err; \ -}) + */ +static inline bool virtio_has_feature(const struct virtio_device *vdev, + unsigned int fbit) +{ + /* Did you forget to fix assumptions on max features? */ + if (__builtin_constant_p(fbit)) + BUILD_BUG_ON(fbit >= 32); + + virtio_check_driver_offered_feature(vdev, fbit); + return test_bit(fbit, vdev->features); +} /** - * __virtio_config_val - get a single virtio config without feature check. + * virtio_config_val - look for a feature and get a virtio config entry. * @vdev: the virtio device + * @fbit: the feature bit * @offset: the type to search for. * @val: a pointer to the value to fill in. * - * The value is endian-corrected and returned in v. */ -#define __virtio_config_val(vdev, offset, v) do { \ - BUILD_BUG_ON(sizeof(*(v)) != 1 && sizeof(*(v)) != 2 \ - && sizeof(*(v)) != 4 && sizeof(*(v)) != 8); \ - (vdev)->config->get((vdev), (offset), (v), sizeof(*(v))); \ - switch (sizeof(*(v))) { \ - case 2: le16_to_cpus((__u16 *) v); break; \ - case 4: le32_to_cpus((__u32 *) v); break; \ - case 8: le64_to_cpus((__u64 *) v); break; \ - } \ -} while(0) + * The return value is -ENOENT if the feature doesn't exist. Otherwise + * the config value is copied into whatever is pointed to by v. */ +#define virtio_config_val(vdev, fbit, offset, v) \ + virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v)) + +static inline int virtio_config_buf(struct virtio_device *vdev, + unsigned int fbit, + unsigned int offset, + void *buf, unsigned len) +{ + if (!virtio_has_feature(vdev, fbit)) + return -ENOENT; + + vdev->config->get(vdev, offset, buf, len); + return 0; +} #endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 1ea3351df60..9405aa6cdf2 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -6,9 +6,18 @@ #define VIRTIO_ID_NET 1 /* The feature bitmap for virtio net */ -#define VIRTIO_NET_F_CSUM 0 /* Can handle pkts w/ partial csum */ +#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ +#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ -#define VIRTIO_NET_F_GSO 6 /* Can handle pkts w/ any GSO type */ +#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ +#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ +#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ +#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ +#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ +#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ +#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ struct virtio_net_config { diff --git a/include/media/v4l2-i2c-drv-legacy.h b/include/media/v4l2-i2c-drv-legacy.h index 347b6f8beb2..878562278b6 100644 --- a/include/media/v4l2-i2c-drv-legacy.h +++ b/include/media/v4l2-i2c-drv-legacy.h @@ -31,6 +31,7 @@ struct v4l2_i2c_driver_data { int (*resume)(struct i2c_client *client); int (*legacy_probe)(struct i2c_adapter *adapter); int legacy_class; + const struct i2c_device_id *id_table; }; static struct v4l2_i2c_driver_data v4l2_i2c_data; @@ -124,6 +125,7 @@ static int __init v4l2_i2c_drv_init(void) v4l2_i2c_driver.command = v4l2_i2c_data.command; v4l2_i2c_driver.probe = v4l2_i2c_data.probe; v4l2_i2c_driver.remove = v4l2_i2c_data.remove; + v4l2_i2c_driver.id_table = v4l2_i2c_data.id_table; err = i2c_add_driver(&v4l2_i2c_driver); if (err) i2c_del_driver(&v4l2_i2c_driver_legacy); diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index 7b6f06be795..40ecef29801 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -36,6 +36,7 @@ struct v4l2_i2c_driver_data { int (*resume)(struct i2c_client *client); int (*legacy_probe)(struct i2c_adapter *adapter); int legacy_class; + const struct i2c_device_id *id_table; }; static struct v4l2_i2c_driver_data v4l2_i2c_data; @@ -53,6 +54,7 @@ static int __init v4l2_i2c_drv_init(void) v4l2_i2c_driver.remove = v4l2_i2c_data.remove; v4l2_i2c_driver.suspend = v4l2_i2c_data.suspend; v4l2_i2c_driver.resume = v4l2_i2c_data.resume; + v4l2_i2c_driver.id_table = v4l2_i2c_data.id_table; return i2c_add_driver(&v4l2_i2c_driver); } diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 1f74bcd603f..32742c4563d 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -30,13 +30,6 @@ #endif /* - * SCSI command lengths - */ - -extern const unsigned char scsi_command_size[8]; -#define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7] - -/* * Special value for scanning to specify scanning or rescanning of all * possible channels, (target) ids, or luns on a given shost. */ @@ -109,6 +102,7 @@ extern const unsigned char scsi_command_size[8]; #define MODE_SENSE_10 0x5a #define PERSISTENT_RESERVE_IN 0x5e #define PERSISTENT_RESERVE_OUT 0x5f +#define VARIABLE_LENGTH_CMD 0x7f #define REPORT_LUNS 0xa0 #define MAINTENANCE_IN 0xa3 #define MOVE_MEDIUM 0xa5 @@ -136,6 +130,38 @@ extern const unsigned char scsi_command_size[8]; #define ATA_12 0xa1 /* 12-byte pass-thru */ /* + * SCSI command lengths + */ + +#define SCSI_MAX_VARLEN_CDB_SIZE 260 + +/* defined in T10 SCSI Primary Commands-2 (SPC2) */ +struct scsi_varlen_cdb_hdr { + u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ + u8 control; + u8 misc[5]; + u8 additional_cdb_length; /* total cdb length - 8 */ + __be16 service_action; + /* service specific data follows */ +}; + +static inline unsigned +scsi_varlen_cdb_length(const void *hdr) +{ + return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8; +} + +extern const unsigned char scsi_command_size_tbl[8]; +#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7] + +static inline unsigned +scsi_command_size(const unsigned char *cmnd) +{ + return (cmnd[0] == VARIABLE_LENGTH_CMD) ? + scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); +} + +/* * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft * T10/1561-D Revision 4 Draft dated 7th November 2002. */ diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 8d20e60a94b..3e46dfae819 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -7,10 +7,28 @@ #include <linux/types.h> #include <linux/timer.h> #include <linux/scatterlist.h> +#include <linux/blkdev.h> struct Scsi_Host; struct scsi_device; +/* + * MAX_COMMAND_SIZE is: + * The longest fixed-length SCSI CDB as per the SCSI standard. + * fixed-length means: commands that their size can be determined + * by their opcode and the CDB does not carry a length specifier, (unlike + * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly + * true and the SCSI standard also defines extended commands and + * vendor specific commands that can be bigger than 16 bytes. The kernel + * will support these using the same infrastructure used for VARLEN CDB's. + * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml + * supports without specifying a cmd_len by ULD's + */ +#define MAX_COMMAND_SIZE 16 +#if (MAX_COMMAND_SIZE > BLK_MAX_CDB) +# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB +#endif + struct scsi_data_buffer { struct sg_table table; unsigned length; @@ -60,12 +78,11 @@ struct scsi_cmnd { int allowed; int timeout_per_command; - unsigned char cmd_len; + unsigned short cmd_len; enum dma_data_direction sc_data_direction; /* These elements define the operation we are about to perform */ -#define MAX_COMMAND_SIZE 16 - unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned char *cmnd; struct timer_list eh_timeout; /* Used to time out the command. */ diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h index d3a133b4a07..2a9add21267 100644 --- a/include/scsi/scsi_eh.h +++ b/include/scsi/scsi_eh.h @@ -75,11 +75,11 @@ struct scsi_eh_save { int result; enum dma_data_direction data_direction; unsigned char cmd_len; - unsigned char cmnd[MAX_COMMAND_SIZE]; + unsigned char *cmnd; struct scsi_data_buffer sdb; struct request *next_rq; - /* new command support */ + unsigned char eh_cmnd[BLK_MAX_CDB]; struct scatterlist sense_sgl; }; diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index d967d6dc7a2..1834fdfe82a 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -573,13 +573,11 @@ struct Scsi_Host { /* * The maximum length of SCSI commands that this host can accept. * Probably 12 for most host adapters, but could be 16 for others. + * or 260 if the driver supports variable length cdbs. * For drivers that don't set this field, a value of 12 is - * assumed. I am leaving this as a number rather than a bit - * because you never know what subsequent SCSI standards might do - * (i.e. could there be a 20 byte or a 24-byte command a few years - * down the road?). + * assumed. */ - unsigned char max_cmd_len; + unsigned short max_cmd_len; int this_id; int can_queue; diff --git a/include/sound/soc.h b/include/sound/soc.h index e6ea6f75094..d3c8c033dff 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -238,7 +238,7 @@ int snd_soc_info_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); -#define snd_soc_info_bool_ext snd_ctl_boolean_mono +#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info int snd_soc_get_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_volsw(struct snd_kcontrol *kcontrol, |