summaryrefslogtreecommitdiff
path: root/lib/zlib_inflate
diff options
context:
space:
mode:
Diffstat (limited to 'lib/zlib_inflate')
-rw-r--r--lib/zlib_inflate/Makefile4
-rw-r--r--lib/zlib_inflate/infblock.c365
-rw-r--r--lib/zlib_inflate/infblock.h48
-rw-r--r--lib/zlib_inflate/infcodes.c202
-rw-r--r--lib/zlib_inflate/infcodes.h33
-rw-r--r--lib/zlib_inflate/inffast.c462
-rw-r--r--lib/zlib_inflate/inffast.h12
-rw-r--r--lib/zlib_inflate/inffixed.h94
-rw-r--r--lib/zlib_inflate/inflate.c1086
-rw-r--r--lib/zlib_inflate/inflate.h107
-rw-r--r--lib/zlib_inflate/inflate_syms.c3
-rw-r--r--lib/zlib_inflate/inflate_sync.c152
-rw-r--r--lib/zlib_inflate/inftrees.c683
-rw-r--r--lib/zlib_inflate/inftrees.h99
-rw-r--r--lib/zlib_inflate/infutil.c88
-rw-r--r--lib/zlib_inflate/infutil.h176
16 files changed, 1729 insertions, 1885 deletions
diff --git a/lib/zlib_inflate/Makefile b/lib/zlib_inflate/Makefile
index 221c139e0df..bf065482fa6 100644
--- a/lib/zlib_inflate/Makefile
+++ b/lib/zlib_inflate/Makefile
@@ -15,5 +15,5 @@
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate.o
-zlib_inflate-objs := infblock.o infcodes.o inffast.o inflate.o \
- inflate_sync.o inftrees.o infutil.o inflate_syms.o
+zlib_inflate-objs := inffast.o inflate.o \
+ inftrees.o inflate_syms.o
diff --git a/lib/zlib_inflate/infblock.c b/lib/zlib_inflate/infblock.c
deleted file mode 100644
index c16cdeff51a..00000000000
--- a/lib/zlib_inflate/infblock.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include <linux/zutil.h>
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state;
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* Table for deflate from PKZIP's appnote.txt. */
-static const uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-void zlib_inflate_blocks_reset(
- inflate_blocks_statef *s,
- z_streamp z,
- uLong *c
-)
-{
- if (c != NULL)
- *c = s->check;
- if (s->mode == CODES)
- zlib_inflate_codes_free(s->sub.decode.codes, z);
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != NULL)
- z->adler = s->check = (*s->checkfn)(0L, NULL, 0);
-}
-
-inflate_blocks_statef *zlib_inflate_blocks_new(
- z_streamp z,
- check_func c,
- uInt w
-)
-{
- inflate_blocks_statef *s;
-
- s = &WS(z)->working_blocks_state;
- s->hufts = WS(z)->working_hufts;
- s->window = WS(z)->working_window;
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- zlib_inflate_blocks_reset(s, z, NULL);
- return s;
-}
-
-
-int zlib_inflate_blocks(
- inflate_blocks_statef *s,
- z_streamp z,
- int r
-)
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Byte *p; /* input data pointer */
- uInt n; /* bytes available there */
- Byte *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- zlib_inflate_trees_fixed(&bl, &bd, &tl, &td, s->hufts, z);
- s->sub.decode.codes = zlib_inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = B_BAD;
- z->msg = (char*)"invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
- {
- s->mode = B_BAD;
- z->msg = (char*)"invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- memcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = B_BAD;
- z->msg = (char*)"too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- {
- s->sub.trees.blens = WS(z)->working_blens;
- }
- DUMPBITS(14)
- s->sub.trees.index = 0;
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = zlib_inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, s->hufts, z);
- if (t != Z_OK)
- {
- r = t;
- if (r == Z_DATA_ERROR)
- s->mode = B_BAD;
- LEAVE
- }
- s->sub.trees.index = 0;
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & zlib_inflate_mask[t]);
- t = h->bits;
- c = h->base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & zlib_inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- s->mode = B_BAD;
- z->msg = (char*)"invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- s->sub.trees.tb = NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
- t = zlib_inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td,
- s->hufts, z);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- s->mode = B_BAD;
- r = t;
- LEAVE
- }
- if ((c = zlib_inflate_codes_new(bl, bd, tl, td, z)) == NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.codes = c;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = zlib_inflate_codes(s, z, r)) != Z_STREAM_END)
- return zlib_inflate_flush(s, z, r);
- r = Z_OK;
- zlib_inflate_codes_free(s->sub.decode.codes, z);
- LOAD
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = B_DONE;
- case B_DONE:
- r = Z_STREAM_END;
- LEAVE
- case B_BAD:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-int zlib_inflate_blocks_free(
- inflate_blocks_statef *s,
- z_streamp z
-)
-{
- zlib_inflate_blocks_reset(s, z, NULL);
- return Z_OK;
-}
-
-
-#if 0
-void zlib_inflate_set_dictionary(
- inflate_blocks_statef *s,
- const Byte *d,
- uInt n
-)
-{
- memcpy(s->window, d, n);
- s->read = s->write = s->window + n;
-}
-#endif /* 0 */
-
-
-/* Returns true if inflate is currently at the end of a block generated
- * by Z_SYNC_FLUSH or Z_FULL_FLUSH.
- * IN assertion: s != NULL
- */
-#if 0
-int zlib_inflate_blocks_sync_point(
- inflate_blocks_statef *s
-)
-{
- return s->mode == LENS;
-}
-#endif /* 0 */
diff --git a/lib/zlib_inflate/infblock.h b/lib/zlib_inflate/infblock.h
deleted file mode 100644
index ceee60b5107..00000000000
--- a/lib/zlib_inflate/infblock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFBLOCK_H
-#define _INFBLOCK_H
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state inflate_blocks_statef;
-
-extern inflate_blocks_statef * zlib_inflate_blocks_new (
- z_streamp z,
- check_func c, /* check function */
- uInt w); /* window size */
-
-extern int zlib_inflate_blocks (
- inflate_blocks_statef *,
- z_streamp ,
- int); /* initial return code */
-
-extern void zlib_inflate_blocks_reset (
- inflate_blocks_statef *,
- z_streamp ,
- uLong *); /* check value on output */
-
-extern int zlib_inflate_blocks_free (
- inflate_blocks_statef *,
- z_streamp);
-
-#if 0
-extern void zlib_inflate_set_dictionary (
- inflate_blocks_statef *s,
- const Byte *d, /* dictionary */
- uInt n); /* dictionary length */
-#endif /* 0 */
-
-#if 0
-extern int zlib_inflate_blocks_sync_point (
- inflate_blocks_statef *s);
-#endif /* 0 */
-
-#endif /* _INFBLOCK_H */
diff --git a/lib/zlib_inflate/infcodes.c b/lib/zlib_inflate/infcodes.c
deleted file mode 100644
index 07cd7591cbb..00000000000
--- a/lib/zlib_inflate/infcodes.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include <linux/zutil.h>
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#include "inffast.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-inflate_codes_statef *zlib_inflate_codes_new(
- uInt bl,
- uInt bd,
- inflate_huft *tl,
- inflate_huft *td, /* need separate declaration for Borland C++ */
- z_streamp z
-)
-{
- inflate_codes_statef *c;
-
- c = &WS(z)->working_state;
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- }
- return c;
-}
-
-
-int zlib_inflate_codes(
- inflate_blocks_statef *s,
- z_streamp z,
- int r
-)
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Byte *p; /* input data pointer */
- uInt n; /* bytes available there */
- Byte *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Byte *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = zlib_inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & zlib_inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- if (e & 32) /* end of block */
- {
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & zlib_inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & zlib_inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t + t->base;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & zlib_inflate_mask[j];
- DUMPBITS(j)
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
- f = q - c->sub.copy.dist;
- while (f < s->window) /* modulo window size-"while" instead */
- f += s->end - s->window; /* of "if" handles invalid distances */
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- if (k > 7) /* return unused byte, if any */
- {
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-#ifdef NEED_DUMMY_RETURN
- return Z_STREAM_ERROR; /* Some dumb compilers complain without this */
-#endif
-}
-
-
-void zlib_inflate_codes_free(
- inflate_codes_statef *c,
- z_streamp z
-)
-{
-}
diff --git a/lib/zlib_inflate/infcodes.h b/lib/zlib_inflate/infcodes.h
deleted file mode 100644
index 5cff417523b..00000000000
--- a/lib/zlib_inflate/infcodes.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFCODES_H
-#define _INFCODES_H
-
-#include "infblock.h"
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state inflate_codes_statef;
-
-extern inflate_codes_statef *zlib_inflate_codes_new (
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_streamp );
-
-extern int zlib_inflate_codes (
- inflate_blocks_statef *,
- z_streamp ,
- int);
-
-extern void zlib_inflate_codes_free (
- inflate_codes_statef *,
- z_streamp );
-
-#endif /* _INFCODES_H */
diff --git a/lib/zlib_inflate/inffast.c b/lib/zlib_inflate/inffast.c
index 0bd7623fc85..02a16eacb72 100644
--- a/lib/zlib_inflate/inffast.c
+++ b/lib/zlib_inflate/inffast.c
@@ -1,176 +1,312 @@
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
*/
#include <linux/zutil.h>
#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
+#include "inflate.h"
#include "inffast.h"
-struct inflate_codes_state;
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-int zlib_inflate_fast(
- uInt bl,
- uInt bd,
- inflate_huft *tl,
- inflate_huft *td, /* need separate declaration for Borland C++ */
- inflate_blocks_statef *s,
- z_streamp z
-)
+#ifndef ASMINF
+
+/* Allow machine dependent optimization for post-increment or pre-increment.
+ Based on testing to date,
+ Pre-increment preferred for:
+ - PowerPC G3 (Adler)
+ - MIPS R5000 (Randers-Pehrson)
+ Post-increment preferred for:
+ - none
+ No measurable difference:
+ - Pentium III (Anderson)
+ - M68060 (Nikl)
+ */
+#ifdef POSTINC
+# define OFF 0
+# define PUP(a) *(a)++
+#else
+# define OFF 1
+# define PUP(a) *++(a)
+#endif
+
+/*
+ Decode literal, length, and distance codes and write out the resulting
+ literal and match bytes until either not enough input or output is
+ available, an end-of-block is encountered, or a data error is encountered.
+ When large enough input and output buffers are supplied to inflate(), for
+ example, a 16K input buffer and a 64K output buffer, more than 95% of the
+ inflate execution time is spent in this routine.
+
+ Entry assumptions:
+
+ state->mode == LEN
+ strm->avail_in >= 6
+ strm->avail_out >= 258
+ start >= strm->avail_out
+ state->bits < 8
+
+ On return, state->mode is one of:
+
+ LEN -- ran out of enough output space or enough available input
+ TYPE -- reached end of block code, inflate() to interpret next block
+ BAD -- error in block data
+
+ Notes:
+
+ - The maximum input bits used by a length/distance pair is 15 bits for the
+ length code, 5 bits for the length extra, 15 bits for the distance code,
+ and 13 bits for the distance extra. This totals 48 bits, or six bytes.
+ Therefore if strm->avail_in >= 6, then there is enough input to avoid
+ checking for available input while decoding.
+
+ - The maximum bytes that a single length/distance pair can output is 258
+ bytes, which is the maximum length that can be coded. inflate_fast()
+ requires strm->avail_out >= 258 for each loop to avoid checking for
+ output space.
+ */
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start; /* inflate()'s starting value for strm->avail_out */
{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Byte *p; /* input data pointer */
- uInt n; /* bytes available there */
- Byte *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Byte *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = zlib_inflate_mask[bl];
- md = zlib_inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
+ struct inflate_state *state;
+ unsigned char *in; /* local strm->next_in */
+ unsigned char *last; /* while in < last, enough input available */
+ unsigned char *out; /* local strm->next_out */
+ unsigned char *beg; /* inflate()'s initial strm->next_out */
+ unsigned char *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char *window; /* allocated sliding window, if wsize != 0 */
+ unsigned long hold; /* local strm->hold */
+ unsigned bits; /* local strm->bits */
+ code const *lcode; /* local strm->lencode */
+ code const *dcode; /* local strm->distcode */
+ unsigned lmask; /* mask for first level of length codes */
+ unsigned dmask; /* mask for first level of distance codes */
+ code this; /* retrieved table entry */
+ unsigned op; /* code bits, operation, extra bits, or */
+ /* window position, window bytes to copy */
+ unsigned len; /* match length, unused bytes */
+ unsigned dist; /* match distance */
+ unsigned char *from; /* where to copy match from */
+
+ /* copy state to local variables */
+ state = (struct inflate_state *)strm->state;
+ in = strm->next_in - OFF;
+ last = in + (strm->avail_in - 5);
+ out = strm->next_out - OFF;
+ beg = out - (start - strm->avail_out);
+ end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
+ wsize = state->wsize;
+ whave = state->whave;
+ write = state->write;
+ window = state->window;
+ hold = state->hold;
+ bits = state->bits;
+ lcode = state->lencode;
+ dcode = state->distcode;
+ lmask = (1U << state->lenbits) - 1;
+ dmask = (1U << state->distbits) - 1;
+
+ /* decode literals and length/distances until end-of-block or not enough
+ input data or output space */
do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & zlib_inflate_mask[e]);
- DUMPBITS(e)
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & zlib_inflate_mask[e]);
- DUMPBITS(e)
-
- /* do the copy */
- m -= c;
- r = q - d;
- if (r < s->window) /* wrap if needed */
- {
- do {
- r += s->end - s->window; /* force pointer in window */
- } while (r < s->window); /* covers invalid distances */
- e = s->end - r;
- if (c > e)
- {
- c -= e; /* wrapped copy */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window;
- do {
- *q++ = *r++;
- } while (--c);
- }
- else /* normal copy */
- {
- *q++ = *r++; c--;
- *q++ = *r++; c--;
- do {
- *q++ = *r++;
- } while (--c);
- }
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = lcode[hold & lmask];
+ dolen:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op == 0) { /* literal */
+ PUP(out) = (unsigned char)(this.val);
+ }
+ else if (op & 16) { /* length base */
+ len = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (op) {
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ len += (unsigned)hold & ((1U << op) - 1);
+ hold >>= op;
+ bits -= op;
+ }
+ if (bits < 15) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ this = dcode[hold & dmask];
+ dodist:
+ op = (unsigned)(this.bits);
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(this.op);
+ if (op & 16) { /* distance base */
+ dist = (unsigned)(this.val);
+ op &= 15; /* number of extra bits */
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ if (bits < op) {
+ hold += (unsigned long)(PUP(in)) << bits;
+ bits += 8;
+ }
+ }
+ dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ hold >>= op;
+ bits -= op;
+ op = (unsigned)(out - beg); /* max distance in output */
+ if (dist > op) { /* see if copy from window */
+ op = dist - op; /* distance back in window */
+ if (op > whave) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ from = window - OFF;
+ if (write == 0) { /* very common case */
+ from += wsize - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ else if (write < op) { /* wrap around window */
+ from += wsize + write - op;
+ op -= write;
+ if (op < len) { /* some from end of window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = window - OFF;
+ if (write < len) { /* some from start of window */
+ op = write;
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ }
+ else { /* contiguous in window */
+ from += write - op;
+ if (op < len) { /* some from window */
+ len -= op;
+ do {
+ PUP(out) = PUP(from);
+ } while (--op);
+ from = out - dist; /* rest from output */
+ }
+ }
+ while (len > 2) {
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ }
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ else {
+ from = out - dist; /* copy direct from output */
+ do { /* minimum length is three */
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ PUP(out) = PUP(from);
+ len -= 3;
+ } while (len > 2);
+ if (len) {
+ PUP(out) = PUP(from);
+ if (len > 1)
+ PUP(out) = PUP(from);
+ }
+ }
+ }
+ else if ((op & 64) == 0) { /* 2nd level distance code */
+ this = dcode[this.val + (hold & ((1U << op) - 1))];
+ goto dodist;
}
- else /* normal copy */
- {
- *q++ = *r++; c--;
- *q++ = *r++; c--;
- do {
- *q++ = *r++;
- } while (--c);
+ else {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
}
+ }
+ else if ((op & 64) == 0) { /* 2nd level length code */
+ this = lcode[this.val + (hold & ((1U << op) - 1))];
+ goto dolen;
+ }
+ else if (op & 32) { /* end-of-block */
+ state->mode = TYPE;
break;
- }
- else if ((e & 64) == 0)
- {
- t += t->base;
- e = (t += ((uInt)b & zlib_inflate_mask[e]))->exop;
- }
- else
- {
- z->msg = (char*)"invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- t += t->base;
- if ((e = (t += ((uInt)b & zlib_inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- *q++ = (Byte)t->base;
- m--;
- break;
}
- }
- else if (e & 32)
- {
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = (char*)"invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
+ else {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ } while (in < last && out < end);
+
+ /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+ len = bits >> 3;
+ in -= len;
+ bits -= len << 3;
+ hold &= (1U << bits) - 1;
+
+ /* update state and return */
+ strm->next_in = in + OFF;
+ strm->next_out = out + OFF;
+ strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+ strm->avail_out = (unsigned)(out < end ?
+ 257 + (end - out) : 257 - (out - end));
+ state->hold = hold;
+ state->bits = bits;
+ return;
}
+
+/*
+ inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+ - Using bit fields for code structure
+ - Different op definition to avoid & for extra bits (do & for table bits)
+ - Three separate decoding do-loops for direct, window, and write == 0
+ - Special case for distance > 1 copies to do overlapped load and store copy
+ - Explicit branch predictions (based on measured branch probabilities)
+ - Deferring match copy and interspersed it with decoding subsequent codes
+ - Swapping literal/length else
+ - Swapping window/direct else
+ - Larger unrolled copy loops (three is about right)
+ - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
diff --git a/lib/zlib_inflate/inffast.h b/lib/zlib_inflate/inffast.h
index fc720f0fa7f..40315d9fddc 100644
--- a/lib/zlib_inflate/inffast.h
+++ b/lib/zlib_inflate/inffast.h
@@ -1,6 +1,6 @@
/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
@@ -8,10 +8,4 @@
subject to change. Applications should only use zlib.h.
*/
-extern int zlib_inflate_fast (
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_streamp );
+void inflate_fast (z_streamp strm, unsigned start);
diff --git a/lib/zlib_inflate/inffixed.h b/lib/zlib_inflate/inffixed.h
new file mode 100644
index 00000000000..75ed4b5978d
--- /dev/null
+++ b/lib/zlib_inflate/inffixed.h
@@ -0,0 +1,94 @@
+ /* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by makefixed().
+ */
+
+ /* WARNING: this file should *not* be used by applications. It
+ is part of the implementation of the compression library and
+ is subject to change. Applications should only use zlib.h.
+ */
+
+ static const code lenfix[512] = {
+ {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+ {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+ {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+ {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+ {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+ {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+ {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+ {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+ {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+ {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+ {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+ {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+ {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+ {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+ {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+ {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+ {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+ {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+ {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+ {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+ {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+ {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+ {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+ {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+ {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+ {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+ {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+ {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+ {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+ {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+ {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+ {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+ {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+ {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+ {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+ {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+ {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+ {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+ {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+ {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+ {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+ {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+ {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+ {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+ {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+ {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+ {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+ {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+ {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+ {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+ {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+ {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+ {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+ {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+ {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+ {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+ {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+ {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+ {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+ {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+ {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+ {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+ {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+ {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+ {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+ {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+ {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+ {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+ {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+ {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+ {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+ {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+ {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+ {0,9,255}
+ };
+
+ static const code distfix[32] = {
+ {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+ {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+ {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+ {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+ {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+ {22,5,193},{64,5,0}
+ };
diff --git a/lib/zlib_inflate/inflate.c b/lib/zlib_inflate/inflate.c
index 31b9e9054bf..7f922dccf1a 100644
--- a/lib/zlib_inflate/inflate.c
+++ b/lib/zlib_inflate/inflate.c
@@ -1,89 +1,148 @@
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Based on zlib 1.2.3 but modified for the Linux Kernel by
+ * Richard Purdie <richard@openedhand.com>
+ *
+ * Changes mainly for static instead of dynamic memory allocation
+ *
*/
#include <linux/zutil.h>
-#include "infblock.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
#include "infutil.h"
int zlib_inflate_workspacesize(void)
{
- return sizeof(struct inflate_workspace);
+ return sizeof(struct inflate_workspace);
}
+int zlib_inflateReset(z_streamp strm)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ strm->total_in = strm->total_out = state->total = 0;
+ strm->msg = NULL;
+ strm->adler = 1; /* to support ill-conceived Java test suite */
+ state->mode = HEAD;
+ state->last = 0;
+ state->havedict = 0;
+ state->dmax = 32768U;
+ state->hold = 0;
+ state->bits = 0;
+ state->lencode = state->distcode = state->next = state->codes;
-int zlib_inflateReset(
- z_streamp z
-)
+ /* Initialise Window */
+ state->wsize = 1U << state->wbits;
+ state->write = 0;
+ state->whave = 0;
+
+ return Z_OK;
+}
+
+#if 0
+int zlib_inflatePrime(z_streamp strm, int bits, int value)
{
- if (z == NULL || z->state == NULL || z->workspace == NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- zlib_inflate_blocks_reset(z->state->blocks, z, NULL);
- return Z_OK;
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
}
+#endif
+
+int zlib_inflateInit2(z_streamp strm, int windowBits)
+{
+ struct inflate_state *state;
+
+ if (strm == NULL) return Z_STREAM_ERROR;
+ strm->msg = NULL; /* in case we return an error */
+
+ state = &WS(strm)->inflate_state;
+ strm->state = (struct internal_state *)state;
+
+ if (windowBits < 0) {
+ state->wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ state->wrap = (windowBits >> 4) + 1;
+ }
+ if (windowBits < 8 || windowBits > 15) {
+ return Z_STREAM_ERROR;
+ }
+ state->wbits = (unsigned)windowBits;
+ state->window = &WS(strm)->working_window[0];
+ return zlib_inflateReset(strm);
+}
-int zlib_inflateEnd(
- z_streamp z
-)
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding. This returns fixed tables from inffixed.h.
+ */
+static void zlib_fixedtables(struct inflate_state *state)
{
- if (z == NULL || z->state == NULL || z->workspace == NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != NULL)
- zlib_inflate_blocks_free(z->state->blocks, z);
- z->state = NULL;
- return Z_OK;
+# include "inffixed.h"
+ state->lencode = lenfix;
+ state->lenbits = 9;
+ state->distcode = distfix;
+ state->distbits = 5;
}
-int zlib_inflateInit2_(
- z_streamp z,
- int w,
- const char *version,
- int stream_size
-)
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning. This is only called when a window is already in use, or when
+ output has been written during this inflate call, but the end of the deflate
+ stream has not been reached yet. It is also called to window dictionary data
+ when a dictionary is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+static void zlib_updatewindow(z_streamp strm, unsigned out)
{
- if (version == NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != sizeof(z_stream) || z->workspace == NULL)
- return Z_VERSION_ERROR;
-
- /* initialize state */
- z->msg = NULL;
- z->state = &WS(z)->internal_state;
- z->state->blocks = NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- zlib_inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- zlib_inflate_blocks_new(z, z->state->nowrap ? NULL : zlib_adler32, (uInt)1 << w))
- == NULL)
- {
- zlib_inflateEnd(z);
- return Z_MEM_ERROR;
- }
-
- /* reset state */
- zlib_inflateReset(z);
- return Z_OK;
+ struct inflate_state *state;
+ unsigned copy, dist;
+
+ state = (struct inflate_state *)strm->state;
+
+ /* copy state->wsize or less output bytes into the circular window */
+ copy = out - strm->avail_out;
+ if (copy >= state->wsize) {
+ memcpy(state->window, strm->next_out - state->wsize, state->wsize);
+ state->write = 0;
+ state->whave = state->wsize;
+ }
+ else {
+ dist = state->wsize - state->write;
+ if (dist > copy) dist = copy;
+ memcpy(state->window + state->write, strm->next_out - copy, dist);
+ copy -= dist;
+ if (copy) {
+ memcpy(state->window, strm->next_out - copy, copy);
+ state->write = copy;
+ state->whave = state->wsize;
+ }
+ else {
+ state->write += dist;
+ if (state->write == state->wsize) state->write = 0;
+ if (state->whave < state->wsize) state->whave += dist;
+ }
+ }
}
@@ -91,157 +150,764 @@ int zlib_inflateInit2_(
* At the end of a Deflate-compressed PPP packet, we expect to have seen
* a `stored' block type value but not the (zero) length bytes.
*/
-static int zlib_inflate_packet_flush(inflate_blocks_statef *s)
+/*
+ Returns true if inflate is currently at the end of a block generated by
+ Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ implementation to provide an additional safety check. PPP uses
+ Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+ block. When decompressing, PPP checks that at the end of input packet,
+ inflate is waiting for these length bytes.
+ */
+static int zlib_inflateSyncPacket(z_streamp strm)
{
- if (s->mode != LENS)
- return Z_DATA_ERROR;
- s->mode = TYPE;
+ struct inflate_state *state;
+
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+
+ if (state->mode == STORED && state->bits == 0) {
+ state->mode = TYPE;
+ return Z_OK;
+ }
+ return Z_DATA_ERROR;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#define UPDATE(check, buf, len) zlib_adler32(check, buf, len)
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+ do { \
+ put = strm->next_out; \
+ left = strm->avail_out; \
+ next = strm->next_in; \
+ have = strm->avail_in; \
+ hold = state->hold; \
+ bits = state->bits; \
+ } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+ do { \
+ strm->next_out = put; \
+ strm->avail_out = left; \
+ strm->next_in = next; \
+ strm->avail_in = have; \
+ state->hold = hold; \
+ state->bits = bits; \
+ } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+ do { \
+ hold = 0; \
+ bits = 0; \
+ } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+ if there is no input available. */
+#define PULLBYTE() \
+ do { \
+ if (have == 0) goto inf_leave; \
+ have--; \
+ hold += (unsigned long)(*next++) << bits; \
+ bits += 8; \
+ } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator. If there is
+ not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+ do { \
+ while (bits < (unsigned)(n)) \
+ PULLBYTE(); \
+ } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+ ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+ do { \
+ hold >>= (n); \
+ bits -= (unsigned)(n); \
+ } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+ do { \
+ hold >>= bits & 7; \
+ bits -= bits & 7; \
+ } while (0)
+
+/* Reverse the bytes in a 32-bit value */
+#define REVERSE(q) \
+ ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+ (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+/*
+ inflate() uses a state machine to process as much input data and generate as
+ much output data as possible before returning. The state machine is
+ structured roughly as follows:
+
+ for (;;) switch (state) {
+ ...
+ case STATEn:
+ if (not enough input data or output space to make progress)
+ return;
+ ... make progress ...
+ state = STATEm;
+ break;
+ ...
+ }
+
+ so when inflate() is called again, the same case is attempted again, and
+ if the appropriate resources are provided, the machine proceeds to the
+ next state. The NEEDBITS() macro is usually the way the state evaluates
+ whether it can proceed or should return. NEEDBITS() does the return if
+ the requested bits are not available. The typical use of the BITS macros
+ is:
+
+ NEEDBITS(n);
+ ... do something with BITS(n) ...
+ DROPBITS(n);
+
+ where NEEDBITS(n) either returns from inflate() if there isn't enough
+ input left to load n bits into the accumulator, or it continues. BITS(n)
+ gives the low n bits in the accumulator. When done, DROPBITS(n) drops
+ the low n bits off the accumulator. INITBITS() clears the accumulator
+ and sets the number of available bits to zero. BYTEBITS() discards just
+ enough bits to put the accumulator on a byte boundary. After BYTEBITS()
+ and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+ NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+ if there is no input available. The decoding of variable length codes uses
+ PULLBYTE() directly in order to pull just enough bytes to decode the next
+ code, and no more.
+
+ Some states loop until they get enough input, making sure that enough
+ state information is maintained to continue the loop where it left off
+ if NEEDBITS() returns in the loop. For example, want, need, and keep
+ would all have to actually be part of the saved state in case NEEDBITS()
+ returns:
+
+ case STATEw:
+ while (want < need) {
+ NEEDBITS(n);
+ keep[want++] = BITS(n);
+ DROPBITS(n);
+ }
+ state = STATEx;
+ case STATEx:
+
+ As shown above, if the next state is also the next case, then the break
+ is omitted.
+
+ A state may also return if there is not enough output space available to
+ complete that state. Those states are copying stored data, writing a
+ literal byte, and copying a matching string.
+
+ When returning, a "goto inf_leave" is used to update the total counters,
+ update the check value, and determine whether any progress has been made
+ during that inflate() call in order to return the proper return code.
+ Progress is defined as a change in either strm->avail_in or strm->avail_out.
+ When there is a window, goto inf_leave will update the window with the last
+ output written. If a goto inf_leave occurs in the middle of decompression
+ and there is no window currently, goto inf_leave will create one and copy
+ output to the window for the next call of inflate().
+
+ In this implementation, the flush parameter of inflate() only affects the
+ return code (per zlib.h). inflate() always writes as much as possible to
+ strm->next_out, given the space available and the provided input--the effect
+ documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers
+ the allocation of and copying into a sliding window until necessary, which
+ provides the effect documented in zlib.h for Z_FINISH when the entire input
+ stream available. So the only thing the flush parameter actually does is:
+ when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it
+ will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int zlib_inflate(z_streamp strm, int flush)
+{
+ struct inflate_state *state;
+ unsigned char *next; /* next input */
+ unsigned char *put; /* next output */
+ unsigned have, left; /* available input and output */
+ unsigned long hold; /* bit buffer */
+ unsigned bits; /* bits in bit buffer */
+ unsigned in, out; /* save starting available input and output */
+ unsigned copy; /* number of stored or match bytes to copy */
+ unsigned char *from; /* where to copy match bytes from */
+ code this; /* current decoding table entry */
+ code last; /* parent table entry */
+ unsigned len; /* length to copy for repeats, bits to drop */
+ int ret; /* return code */
+ static const unsigned short order[19] = /* permutation of code lengths */
+ {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+ if (strm == NULL || strm->state == NULL || strm->next_out == NULL ||
+ (strm->next_in == NULL && strm->avail_in != 0))
+ return Z_STREAM_ERROR;
+
+ state = (struct inflate_state *)strm->state;
+
+ if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */
+ LOAD();
+ in = have;
+ out = left;
+ ret = Z_OK;
+ for (;;)
+ switch (state->mode) {
+ case HEAD:
+ if (state->wrap == 0) {
+ state->mode = TYPEDO;
+ break;
+ }
+ NEEDBITS(16);
+ if (
+ ((BITS(8) << 8) + (hold >> 8)) % 31) {
+ strm->msg = (char *)"incorrect header check";
+ state->mode = BAD;
+ break;
+ }
+ if (BITS(4) != Z_DEFLATED) {
+ strm->msg = (char *)"unknown compression method";
+ state->mode = BAD;
+ break;
+ }
+ DROPBITS(4);
+ len = BITS(4) + 8;
+ if (len > state->wbits) {
+ strm->msg = (char *)"invalid window size";
+ state->mode = BAD;
+ break;
+ }
+ state->dmax = 1U << len;
+ strm->adler = state->check = zlib_adler32(0L, NULL, 0);
+ state->mode = hold & 0x200 ? DICTID : TYPE;
+ INITBITS();
+ break;
+ case DICTID:
+ NEEDBITS(32);
+ strm->adler = state->check = REVERSE(hold);
+ INITBITS();
+ state->mode = DICT;
+ case DICT:
+ if (state->havedict == 0) {
+ RESTORE();
+ return Z_NEED_DICT;
+ }
+ strm->adler = state->check = zlib_adler32(0L, NULL, 0);
+ state->mode = TYPE;
+ case TYPE:
+ if (flush == Z_BLOCK) goto inf_leave;
+ case TYPEDO:
+ if (state->last) {
+ BYTEBITS();
+ state->mode = CHECK;
+ break;
+ }
+ NEEDBITS(3);
+ state->last = BITS(1);
+ DROPBITS(1);
+ switch (BITS(2)) {
+ case 0: /* stored block */
+ state->mode = STORED;
+ break;
+ case 1: /* fixed block */
+ zlib_fixedtables(state);
+ state->mode = LEN; /* decode codes */
+ break;
+ case 2: /* dynamic block */
+ state->mode = TABLE;
+ break;
+ case 3:
+ strm->msg = (char *)"invalid block type";
+ state->mode = BAD;
+ }
+ DROPBITS(2);
+ break;
+ case STORED:
+ BYTEBITS(); /* go to byte boundary */
+ NEEDBITS(32);
+ if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+ strm->msg = (char *)"invalid stored block lengths";
+ state->mode = BAD;
+ break;
+ }
+ state->length = (unsigned)hold & 0xffff;
+ INITBITS();
+ state->mode = COPY;
+ case COPY:
+ copy = state->length;
+ if (copy) {
+ if (copy > have) copy = have;
+ if (copy > left) copy = left;
+ if (copy == 0) goto inf_leave;
+ memcpy(put, next, copy);
+ have -= copy;
+ next += copy;
+ left -= copy;
+ put += copy;
+ state->length -= copy;
+ break;
+ }
+ state->mode = TYPE;
+ break;
+ case TABLE:
+ NEEDBITS(14);
+ state->nlen = BITS(5) + 257;
+ DROPBITS(5);
+ state->ndist = BITS(5) + 1;
+ DROPBITS(5);
+ state->ncode = BITS(4) + 4;
+ DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+ if (state->nlen > 286 || state->ndist > 30) {
+ strm->msg = (char *)"too many length or distance symbols";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ state->have = 0;
+ state->mode = LENLENS;
+ case LENLENS:
+ while (state->have < state->ncode) {
+ NEEDBITS(3);
+ state->lens[order[state->have++]] = (unsigned short)BITS(3);
+ DROPBITS(3);
+ }
+ while (state->have < 19)
+ state->lens[order[state->have++]] = 0;
+ state->next = state->codes;
+ state->lencode = (code const *)(state->next);
+ state->lenbits = 7;
+ ret = zlib_inflate_table(CODES, state->lens, 19, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid code lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->have = 0;
+ state->mode = CODELENS;
+ case CODELENS:
+ while (state->have < state->nlen + state->ndist) {
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.val < 16) {
+ NEEDBITS(this.bits);
+ DROPBITS(this.bits);
+ state->lens[state->have++] = this.val;
+ }
+ else {
+ if (this.val == 16) {
+ NEEDBITS(this.bits + 2);
+ DROPBITS(this.bits);
+ if (state->have == 0) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ len = state->lens[state->have - 1];
+ copy = 3 + BITS(2);
+ DROPBITS(2);
+ }
+ else if (this.val == 17) {
+ NEEDBITS(this.bits + 3);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 3 + BITS(3);
+ DROPBITS(3);
+ }
+ else {
+ NEEDBITS(this.bits + 7);
+ DROPBITS(this.bits);
+ len = 0;
+ copy = 11 + BITS(7);
+ DROPBITS(7);
+ }
+ if (state->have + copy > state->nlen + state->ndist) {
+ strm->msg = (char *)"invalid bit length repeat";
+ state->mode = BAD;
+ break;
+ }
+ while (copy--)
+ state->lens[state->have++] = (unsigned short)len;
+ }
+ }
+
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* build code tables */
+ state->next = state->codes;
+ state->lencode = (code const *)(state->next);
+ state->lenbits = 9;
+ ret = zlib_inflate_table(LENS, state->lens, state->nlen, &(state->next),
+ &(state->lenbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid literal/lengths set";
+ state->mode = BAD;
+ break;
+ }
+ state->distcode = (code const *)(state->next);
+ state->distbits = 6;
+ ret = zlib_inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+ &(state->next), &(state->distbits), state->work);
+ if (ret) {
+ strm->msg = (char *)"invalid distances set";
+ state->mode = BAD;
+ break;
+ }
+ state->mode = LEN;
+ case LEN:
+ if (have >= 6 && left >= 258) {
+ RESTORE();
+ inflate_fast(strm, out);
+ LOAD();
+ break;
+ }
+ for (;;) {
+ this = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if (this.op && (this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->lencode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ state->length = (unsigned)this.val;
+ if ((int)(this.op) == 0) {
+ state->mode = LIT;
+ break;
+ }
+ if (this.op & 32) {
+ state->mode = TYPE;
+ break;
+ }
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid literal/length code";
+ state->mode = BAD;
+ break;
+ }
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = LENEXT;
+ case LENEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->length += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+ state->mode = DIST;
+ case DIST:
+ for (;;) {
+ this = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ if ((this.op & 0xf0) == 0) {
+ last = this;
+ for (;;) {
+ this = state->distcode[last.val +
+ (BITS(last.bits + last.op) >> last.bits)];
+ if ((unsigned)(last.bits + this.bits) <= bits) break;
+ PULLBYTE();
+ }
+ DROPBITS(last.bits);
+ }
+ DROPBITS(this.bits);
+ if (this.op & 64) {
+ strm->msg = (char *)"invalid distance code";
+ state->mode = BAD;
+ break;
+ }
+ state->offset = (unsigned)this.val;
+ state->extra = (unsigned)(this.op) & 15;
+ state->mode = DISTEXT;
+ case DISTEXT:
+ if (state->extra) {
+ NEEDBITS(state->extra);
+ state->offset += BITS(state->extra);
+ DROPBITS(state->extra);
+ }
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
+ if (state->offset > state->whave + out - left) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+ state->mode = MATCH;
+ case MATCH:
+ if (left == 0) goto inf_leave;
+ copy = out - left;
+ if (state->offset > copy) { /* copy from window */
+ copy = state->offset - copy;
+ if (copy > state->write) {
+ copy -= state->write;
+ from = state->window + (state->wsize - copy);
+ }
+ else
+ from = state->window + (state->write - copy);
+ if (copy > state->length) copy = state->length;
+ }
+ else { /* copy from output */
+ from = put - state->offset;
+ copy = state->length;
+ }
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = *from++;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+ case LIT:
+ if (left == 0) goto inf_leave;
+ *put++ = (unsigned char)(state->length);
+ left--;
+ state->mode = LEN;
+ break;
+ case CHECK:
+ if (state->wrap) {
+ NEEDBITS(32);
+ out -= left;
+ strm->total_out += out;
+ state->total += out;
+ if (out)
+ strm->adler = state->check =
+ UPDATE(state->check, put - out, out);
+ out = left;
+ if ((
+ REVERSE(hold)) != state->check) {
+ strm->msg = (char *)"incorrect data check";
+ state->mode = BAD;
+ break;
+ }
+ INITBITS();
+ }
+ state->mode = DONE;
+ case DONE:
+ ret = Z_STREAM_END;
+ goto inf_leave;
+ case BAD:
+ ret = Z_DATA_ERROR;
+ goto inf_leave;
+ case MEM:
+ return Z_MEM_ERROR;
+ case SYNC:
+ default:
+ return Z_STREAM_ERROR;
+ }
+
+ /*
+ Return from inflate(), updating the total counts and the check value.
+ If there was no progress during the inflate() call, return a buffer
+ error. Call zlib_updatewindow() to create and/or update the window state.
+ */
+ inf_leave:
+ RESTORE();
+ if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+ zlib_updatewindow(strm, out);
+
+ in -= strm->avail_in;
+ out -= strm->avail_out;
+ strm->total_in += in;
+ strm->total_out += out;
+ state->total += out;
+ if (state->wrap && out)
+ strm->adler = state->check =
+ UPDATE(state->check, strm->next_out - out, out);
+
+ strm->data_type = state->bits + (state->last ? 64 : 0) +
+ (state->mode == TYPE ? 128 : 0);
+ if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+ ret = Z_BUF_ERROR;
+
+ if (flush == Z_PACKET_FLUSH && ret == Z_OK &&
+ (strm->avail_out != 0 || strm->avail_in == 0))
+ return zlib_inflateSyncPacket(strm);
+ return ret;
+}
+
+int zlib_inflateEnd(z_streamp strm)
+{
+ if (strm == NULL || strm->state == NULL)
+ return Z_STREAM_ERROR;
return Z_OK;
}
+#if 0
+int zlib_inflateSetDictionary(z_streamp strm, const Byte *dictionary,
+ uInt dictLength)
+{
+ struct inflate_state *state;
+ unsigned long id;
+
+ /* check state */
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
+
+ /* check for correct dictionary id */
+ if (state->mode == DICT) {
+ id = zlib_adler32(0L, NULL, 0);
+ id = zlib_adler32(id, dictionary, dictLength);
+ if (id != state->check)
+ return Z_DATA_ERROR;
+ }
+
+ /* copy dictionary to window */
+ zlib_updatewindow(strm, strm->avail_out);
-int zlib_inflateInit_(
- z_streamp z,
- const char *version,
- int stream_size
-)
+ if (dictLength > state->wsize) {
+ memcpy(state->window, dictionary + dictLength - state->wsize,
+ state->wsize);
+ state->whave = state->wsize;
+ }
+ else {
+ memcpy(state->window + state->wsize - dictLength, dictionary,
+ dictLength);
+ state->whave = dictLength;
+ }
+ state->havedict = 1;
+ return Z_OK;
+}
+#endif
+
+#if 0
+/*
+ Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
+ or when out of input. When called, *have is the number of pattern bytes
+ found in order so far, in 0..3. On return *have is updated to the new
+ state. If on return *have equals four, then the pattern was found and the
+ return value is how many bytes were read including the last byte of the
+ pattern. If *have is less than four, then the pattern has not been found
+ yet and the return value is len. In the latter case, zlib_syncsearch() can be
+ called again with more data and the *have state. *have is initialized to
+ zero for the first call.
+ */
+static unsigned zlib_syncsearch(unsigned *have, unsigned char *buf,
+ unsigned len)
{
- return zlib_inflateInit2_(z, DEF_WBITS, version, stream_size);
+ unsigned got;
+ unsigned next;
+
+ got = *have;
+ next = 0;
+ while (next < len && got < 4) {
+ if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+ got++;
+ else if (buf[next])
+ got = 0;
+ else
+ got = 4 - got;
+ next++;
+ }
+ *have = got;
+ return next;
}
+#endif
-#undef NEEDBYTE
-#undef NEXTBYTE
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=trv;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+#if 0
+int zlib_inflateSync(z_streamp strm)
+{
+ unsigned len; /* number of bytes to look at or looked at */
+ unsigned long in, out; /* temporary to save total_in and total_out */
+ unsigned char buf[4]; /* to restore bit buffer to byte string */
+ struct inflate_state *state;
+
+ /* check parameters */
+ if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state *)strm->state;
+ if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+ /* if first time, start search in bit buffer */
+ if (state->mode != SYNC) {
+ state->mode = SYNC;
+ state->hold <<= state->bits & 7;
+ state->bits -= state->bits & 7;
+ len = 0;
+ while (state->bits >= 8) {
+ buf[len++] = (unsigned char)(state->hold);
+ state->hold >>= 8;
+ state->bits -= 8;
+ }
+ state->have = 0;
+ zlib_syncsearch(&(state->have), buf, len);
+ }
+
+ /* search available input */
+ len = zlib_syncsearch(&(state->have), strm->next_in, strm->avail_in);
+ strm->avail_in -= len;
+ strm->next_in += len;
+ strm->total_in += len;
+
+ /* return no joy or set up to restart inflate() on a new block */
+ if (state->have != 4) return Z_DATA_ERROR;
+ in = strm->total_in; out = strm->total_out;
+ zlib_inflateReset(strm);
+ strm->total_in = in; strm->total_out = out;
+ state->mode = TYPE;
+ return Z_OK;
+}
+#endif
-int zlib_inflate(
- z_streamp z,
- int f
-)
+/*
+ * This subroutine adds the data at next_in/avail_in to the output history
+ * without performing any output. The output buffer must be "caught up";
+ * i.e. no pending output but this should always be the case. The state must
+ * be waiting on the start of a block (i.e. mode == TYPE or HEAD). On exit,
+ * the output will also be caught up, and the checksum will have been updated
+ * if need be.
+ */
+int zlib_inflateIncomp(z_stream *z)
{
- int r, trv;
- uInt b;
-
- if (z == NULL || z->state == NULL || z->next_in == NULL)
- return Z_STREAM_ERROR;
- trv = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
- {
- z->state->mode = I_BAD;
- z->msg = (char*)"unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = I_BAD;
- z->msg = (char*)"invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- b = NEXTBYTE;
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = I_BAD;
- z->msg = (char*)"incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if (!(b & PRESET_DICT))
- {
- z->state->mode = BLOCKS;
- break;
- }
- z->state->mode = DICT4;
- case DICT4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = DICT3;
- case DICT3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = DICT2;
- case DICT2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = DICT1;
- case DICT1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
- z->adler = z->state->sub.check.need;
- z->state->mode = DICT0;
- return Z_NEED_DICT;
- case DICT0:
- z->state->mode = I_BAD;
- z->msg = (char*)"need dictionary";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_STREAM_ERROR;
- case BLOCKS:
- r = zlib_inflate_blocks(z->state->blocks, z, r);
- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
- r = zlib_inflate_packet_flush(z->state->blocks);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = I_BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r == Z_OK)
- r = trv;
- if (r != Z_STREAM_END)
- return r;
- r = trv;
- zlib_inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = I_DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = I_BAD;
- z->msg = (char*)"incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = I_DONE;
- case I_DONE:
- return Z_STREAM_END;
- case I_BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
- empty:
- if (f != Z_PACKET_FLUSH)
- return r;
- z->state->mode = I_BAD;
- z->msg = (char *)"need more for packet flush";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_DATA_ERROR;
+ struct inflate_state *state = (struct inflate_state *)z->state;
+ Byte *saved_no = z->next_out;
+ uInt saved_ao = z->avail_out;
+
+ if (state->mode != TYPE && state->mode != HEAD)
+ return Z_DATA_ERROR;
+
+ /* Setup some variables to allow misuse of updateWindow */
+ z->avail_out = 0;
+ z->next_out = z->next_in + z->avail_in;
+
+ zlib_updatewindow(z, z->avail_in);
+
+ /* Restore saved variables */
+ z->avail_out = saved_ao;
+ z->next_out = saved_no;
+
+ z->adler = state->check =
+ UPDATE(state->check, z->next_in, z->avail_in);
+
+ z->total_out += z->avail_in;
+ z->total_in += z->avail_in;
+ z->next_in += z->avail_in;
+ state->total += z->avail_in;
+ z->avail_in = 0;
+
+ return Z_OK;
}
diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h
new file mode 100644
index 00000000000..df8a6c92052
--- /dev/null
+++ b/lib/zlib_inflate/inflate.h
@@ -0,0 +1,107 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+ part of the implementation of the compression library and is
+ subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+ HEAD, /* i: waiting for magic header */
+ FLAGS, /* i: waiting for method and flags (gzip) */
+ TIME, /* i: waiting for modification time (gzip) */
+ OS, /* i: waiting for extra flags and operating system (gzip) */
+ EXLEN, /* i: waiting for extra length (gzip) */
+ EXTRA, /* i: waiting for extra bytes (gzip) */
+ NAME, /* i: waiting for end of file name (gzip) */
+ COMMENT, /* i: waiting for end of comment (gzip) */
+ HCRC, /* i: waiting for header crc (gzip) */
+ DICTID, /* i: waiting for dictionary check value */
+ DICT, /* waiting for inflateSetDictionary() call */
+ TYPE, /* i: waiting for type bits, including last-flag bit */
+ TYPEDO, /* i: same, but skip check to exit inflate on new block */
+ STORED, /* i: waiting for stored size (length and complement) */
+ COPY, /* i/o: waiting for input or output to copy stored block */
+ TABLE, /* i: waiting for dynamic block table lengths */
+ LENLENS, /* i: waiting for code length code lengths */
+ CODELENS, /* i: waiting for length/lit and distance code lengths */
+ LEN, /* i: waiting for length/lit code */
+ LENEXT, /* i: waiting for length extra bits */
+ DIST, /* i: waiting for distance code */
+ DISTEXT, /* i: waiting for distance extra bits */
+ MATCH, /* o: waiting for output space to copy string */
+ LIT, /* o: waiting for output space to write literal */
+ CHECK, /* i: waiting for 32-bit check value */
+ LENGTH, /* i: waiting for 32-bit length (gzip) */
+ DONE, /* finished check, done -- remain here until reset */
+ BAD, /* got a data error -- remain here until reset */
+ MEM, /* got an inflate() memory error -- remain here until reset */
+ SYNC /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+ State transitions between above modes -
+
+ (most modes can go to the BAD or MEM mode -- not shown for clarity)
+
+ Process header:
+ HEAD -> (gzip) or (zlib)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
+ NAME -> COMMENT -> HCRC -> TYPE
+ (zlib) -> DICTID or TYPE
+ DICTID -> DICT -> TYPE
+ Read deflate blocks:
+ TYPE -> STORED or TABLE or LEN or CHECK
+ STORED -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN
+ Read deflate codes:
+ LEN -> LENEXT or LIT or TYPE
+ LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+ LIT -> LEN
+ Process trailer:
+ CHECK -> LENGTH -> DONE
+ */
+
+/* state maintained between inflate() calls. Approximately 7K bytes. */
+struct inflate_state {
+ inflate_mode mode; /* current inflate mode */
+ int last; /* true if processing last block */
+ int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
+ int havedict; /* true if dictionary provided */
+ int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
+ unsigned long check; /* protected copy of check value */
+ unsigned long total; /* protected copy of output count */
+ /* gz_headerp head; */ /* where to save gzip header information */
+ /* sliding window */
+ unsigned wbits; /* log base 2 of requested window size */
+ unsigned wsize; /* window size or zero if not using window */
+ unsigned whave; /* valid bytes in the window */
+ unsigned write; /* window write index */
+ unsigned char *window; /* allocated sliding window, if needed */
+ /* bit accumulator */
+ unsigned long hold; /* input bit accumulator */
+ unsigned bits; /* number of bits in "in" */
+ /* for string and stored block copying */
+ unsigned length; /* literal or length of data to copy */
+ unsigned offset; /* distance back to copy string from */
+ /* for table and code decoding */
+ unsigned extra; /* extra bits needed */
+ /* fixed and dynamic code tables */
+ code const *lencode; /* starting table for length/literal codes */
+ code const *distcode; /* starting table for distance codes */
+ unsigned lenbits; /* index bits for lencode */
+ unsigned distbits; /* index bits for distcode */
+ /* dynamic table building */
+ unsigned ncode; /* number of code length code lengths */
+ unsigned nlen; /* number of length code lengths */
+ unsigned ndist; /* number of distance code lengths */
+ unsigned have; /* number of code lengths in lens[] */
+ code *next; /* next available space in codes[] */
+ unsigned short lens[320]; /* temporary storage for code lengths */
+ unsigned short work[288]; /* work area for code table building */
+ code codes[ENOUGH]; /* space for code tables */
+};
diff --git a/lib/zlib_inflate/inflate_syms.c b/lib/zlib_inflate/inflate_syms.c
index ef49738f57e..2061d4f0676 100644
--- a/lib/zlib_inflate/inflate_syms.c
+++ b/lib/zlib_inflate/inflate_syms.c
@@ -12,8 +12,7 @@
EXPORT_SYMBOL(zlib_inflate_workspacesize);
EXPORT_SYMBOL(zlib_inflate);
-EXPORT_SYMBOL(zlib_inflateInit_);
-EXPORT_SYMBOL(zlib_inflateInit2_);
+EXPORT_SYMBOL(zlib_inflateInit2);
EXPORT_SYMBOL(zlib_inflateEnd);
EXPORT_SYMBOL(zlib_inflateReset);
EXPORT_SYMBOL(zlib_inflateIncomp);
diff --git a/lib/zlib_inflate/inflate_sync.c b/lib/zlib_inflate/inflate_sync.c
deleted file mode 100644
index 61411ff89d6..00000000000
--- a/lib/zlib_inflate/inflate_sync.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include <linux/zutil.h>
-#include "infblock.h"
-#include "infutil.h"
-
-#if 0
-int zlib_inflateSync(
- z_streamp z
-)
-{
- uInt n; /* number of bytes to look at */
- Byte *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == NULL || z->state == NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != I_BAD)
- {
- z->state->mode = I_BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- static const Byte mark[4] = {0, 0, 0xff, 0xff};
- if (*p == mark[m])
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- zlib_inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-#endif /* 0 */
-
-
-/* Returns true if inflate is currently at the end of a block generated
- * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
- * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
- * but removes the length bytes of the resulting empty stored block. When
- * decompressing, PPP checks that at the end of input packet, inflate is
- * waiting for these length bytes.
- */
-#if 0
-int zlib_inflateSyncPoint(
- z_streamp z
-)
-{
- if (z == NULL || z->state == NULL || z->state->blocks == NULL)
- return Z_STREAM_ERROR;
- return zlib_inflate_blocks_sync_point(z->state->blocks);
-}
-#endif /* 0 */
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-static int zlib_inflate_addhistory(inflate_blocks_statef *s,
- z_stream *z)
-{
- uLong b; /* bit buffer */ /* NOT USED HERE */
- uInt k; /* bits in bit buffer */ /* NOT USED HERE */
- uInt t; /* temporary storage */
- Byte *p; /* input data pointer */
- uInt n; /* bytes available there */
- Byte *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- if (s->read != s->write)
- return Z_STREAM_ERROR;
- if (s->mode != TYPE)
- return Z_DATA_ERROR;
-
- /* we're ready to rock */
- LOAD
- /* while there is input ready, copy to output buffer, moving
- * pointers as needed.
- */
- while (n) {
- t = n; /* how many to do */
- /* is there room until end of buffer? */
- if (t > m) t = m;
- /* update check information */
- if (s->checkfn != NULL)
- s->check = (*s->checkfn)(s->check, q, t);
- memcpy(q, p, t);
- q += t;
- p += t;
- n -= t;
- z->total_out += t;
- s->read = q; /* drag read pointer forward */
-/* WWRAP */ /* expand WWRAP macro by hand to handle s->read */
- if (q == s->end) {
- s->read = q = s->window;
- m = WAVAIL;
- }
- }
- UPDATE
- return Z_OK;
-}
-
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int zlib_inflateIncomp(
- z_stream *z
-
-)
-{
- if (z->state->mode != BLOCKS)
- return Z_DATA_ERROR;
- return zlib_inflate_addhistory(z->state->blocks, z);
-}
diff --git a/lib/zlib_inflate/inftrees.c b/lib/zlib_inflate/inftrees.c
index 874950ec485..62343c53bf7 100644
--- a/lib/zlib_inflate/inftrees.c
+++ b/lib/zlib_inflate/inftrees.c
@@ -1,412 +1,329 @@
/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
*/
#include <linux/zutil.h>
#include "inftrees.h"
-#include "infutil.h"
-static const char inflate_copyright[] __attribute_used__ =
- " inflate 1.1.3 Copyright 1995-1998 Mark Adler ";
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+ " inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
include such an acknowledgment, I would appreciate that you keep this
copyright string in the executable of your product.
*/
-struct internal_state;
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-static int huft_build (
- uInt *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- const uInt *, /* list of base values for non-simple codes */
- const uInt *, /* list of extra bits for non-simple codes */
- inflate_huft **, /* result: starting table */
- uInt *, /* maximum lookup bits (returns actual) */
- inflate_huft *, /* space for trees */
- uInt *, /* hufts used in space */
- uInt * ); /* space for values */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-static const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* see note #13 above about 258 */
-static const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-static const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-static const uInt cpdext[30] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
+ Build a set of tables to decode the provided canonical Huffman code.
+ The code lengths are lens[0..codes-1]. The result starts at *table,
+ whose indices are 0..2^bits-1. work is a writable array of at least
+ lens shorts, which is used as a work area. type is the type of code
+ to be generated, CODES, LENS, or DISTS. On return, zero is success,
+ -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
+ on return points to the next available entry's address. bits is the
+ requested root table index bits, and on return it is the actual root
+ table index bits. It will differ if the request is greater than the
+ longest code or if it is less than the shortest code.
*/
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-
-static int huft_build(
- uInt *b, /* code lengths in bits (all assumed <= BMAX) */
- uInt n, /* number of codes (assumed <= 288) */
- uInt s, /* number of simple-valued codes (0..s-1) */
- const uInt *d, /* list of base values for non-simple codes */
- const uInt *e, /* list of extra bits for non-simple codes */
- inflate_huft **t, /* result: starting table */
- uInt *m, /* maximum lookup bits, returns actual */
- inflate_huft *hp, /* space for trees */
- uInt *hn, /* hufts used in space */
- uInt *v /* working area: values in order of bit length */
-)
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
- lengths), or Z_MEM_ERROR if not enough memory. */
+int zlib_inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short *lens;
+unsigned codes;
+code **table;
+unsigned *bits;
+unsigned short *work;
{
+ unsigned len; /* a code's length in bits */
+ unsigned sym; /* index of code symbols */
+ unsigned min, max; /* minimum and maximum code lengths */
+ unsigned root; /* number of index bits for root table */
+ unsigned curr; /* number of index bits for current table */
+ unsigned drop; /* code bits to drop for sub-table */
+ int left; /* number of prefix codes available */
+ unsigned used; /* code entries in table used */
+ unsigned huff; /* Huffman code */
+ unsigned incr; /* for incrementing code, index */
+ unsigned fill; /* index for replicating entries */
+ unsigned low; /* low bits for current root entry */
+ unsigned mask; /* mask for low root bits */
+ code this; /* table entry for duplication */
+ code *next; /* next available space in table */
+ const unsigned short *base; /* base value table to use */
+ const unsigned short *extra; /* extra bits table to use */
+ int end; /* use base and extra for symbol > end */
+ unsigned short count[MAXBITS+1]; /* number of codes of each length */
+ unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
+ static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+ 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+ static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+ 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
+ static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+ 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+ 8193, 12289, 16385, 24577, 0, 0};
+ static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+ 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+ 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+ 28, 28, 29, 29, 64, 64};
+
+ /*
+ Process a set of code lengths to create a canonical Huffman code. The
+ code lengths are lens[0..codes-1]. Each length corresponds to the
+ symbols 0..codes-1. The Huffman code is generated by first sorting the
+ symbols by length from short to long, and retaining the symbol order
+ for codes with equal lengths. Then the code starts with all zero bits
+ for the first code of the shortest length, and the codes are integer
+ increments for the same length, and zeros are appended as the length
+ increases. For the deflate format, these bits are stored backwards
+ from their more natural integer increment ordering, and so when the
+ decoding tables are built in the large loop below, the integer codes
+ are incremented backwards.
+
+ This routine assumes, but does not check, that all of the entries in
+ lens[] are in the range 0..MAXBITS. The caller must assure this.
+ 1..MAXBITS is interpreted as that code length. zero means that that
+ symbol does not occur in this code.
+
+ The codes are sorted by computing a count of codes for each length,
+ creating from that a table of starting indices for each length in the
+ sorted table, and then entering the symbols in order in the sorted
+ table. The sorted table is work[], with that space being provided by
+ the caller.
+
+ The length counts are used for other purposes as well, i.e. finding
+ the minimum and maximum length codes, determining if there are any
+ codes at all, checking for a valid set of lengths, and looking ahead
+ at length counts to determine sub-table sizes when building the
+ decoding tables.
+ */
+
+ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+ for (len = 0; len <= MAXBITS; len++)
+ count[len] = 0;
+ for (sym = 0; sym < codes; sym++)
+ count[lens[sym]]++;
+
+ /* bound code lengths, force root to be within code lengths */
+ root = *bits;
+ for (max = MAXBITS; max >= 1; max--)
+ if (count[max] != 0) break;
+ if (root > max) root = max;
+ if (max == 0) { /* no symbols to code at all */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)1;
+ this.val = (unsigned short)0;
+ *(*table)++ = this; /* make a table to force an error */
+ *(*table)++ = this;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min <= MAXBITS; min++)
+ if (count[min] != 0) break;
+ if (root < min) root = min;
+
+ /* check for an over-subscribed or incomplete set of lengths */
+ left = 1;
+ for (len = 1; len <= MAXBITS; len++) {
+ left <<= 1;
+ left -= count[len];
+ if (left < 0) return -1; /* over-subscribed */
+ }
+ if (left > 0 && (type == CODES || max != 1))
+ return -1; /* incomplete set */
+
+ /* generate offsets into symbol table for each length for sorting */
+ offs[1] = 0;
+ for (len = 1; len < MAXBITS; len++)
+ offs[len + 1] = offs[len] + count[len];
+
+ /* sort symbols by length, by symbol order within each length */
+ for (sym = 0; sym < codes; sym++)
+ if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+ /*
+ Create and fill in decoding tables. In this loop, the table being
+ filled is at next and has curr index bits. The code being used is huff
+ with length len. That code is converted to an index by dropping drop
+ bits off of the bottom. For codes where len is less than drop + curr,
+ those top drop + curr - len bits are incremented through all values to
+ fill the table with replicated entries.
+
+ root is the number of index bits for the root table. When len exceeds
+ root, sub-tables are created pointed to by the root entry with an index
+ of the low root bits of huff. This is saved in low to check for when a
+ new sub-table should be started. drop is zero when the root table is
+ being filled, and drop is root when sub-tables are being filled.
+
+ When a new sub-table is needed, it is necessary to look ahead in the
+ code lengths to determine what size sub-table is needed. The length
+ counts are used for this, and so count[] is decremented as codes are
+ entered in the tables.
+
+ used keeps track of how many table entries have been allocated from the
+ provided *table space. It is checked when a LENS table is being made
+ against the space in *table, ENOUGH, minus the maximum space needed by
+ the worst case distance code, MAXD. This should never happen, but the
+ sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+ This assumes that when type == LENS, bits == 9.
+
+ sym increments through all symbols, and the loop terminates when
+ all codes of length max, i.e. all codes, have been processed. This
+ routine permits incomplete codes, so another loop after this one fills
+ in the rest of the decoding tables with invalid code markers.
+ */
+
+ /* set up for code type */
+ switch (type) {
+ case CODES:
+ base = extra = work; /* dummy value--not used */
+ end = 19;
+ break;
+ case LENS:
+ base = lbase;
+ base -= 257;
+ extra = lext;
+ extra -= 257;
+ end = 256;
+ break;
+ default: /* DISTS */
+ base = dbase;
+ extra = dext;
+ end = -1;
+ }
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- register uInt i; /* counter, current code */
- register uInt j; /* counter */
- register int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */
- register uInt *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- register int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uInt *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
- n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = NULL; /* just to keep compilers happy */
- q = NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = g - w;
- z = z > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
+ /* initialize state for loop */
+ huff = 0; /* starting code */
+ sym = 0; /* starting code symbol */
+ len = min; /* starting code length */
+ next = *table; /* current table to fill in */
+ curr = root; /* current table index bits */
+ drop = 0; /* current bits to drop from code for index */
+ low = (unsigned)(-1); /* trigger new sub-table when len > root */
+ used = 1U << root; /* use root table entries */
+ mask = used - 1; /* mask for comparing low */
+
+ /* check available table space */
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
+
+ /* process all codes and make table entries */
+ for (;;) {
+ /* create table entry */
+ this.bits = (unsigned char)(len - drop);
+ if ((int)(work[sym]) < end) {
+ this.op = (unsigned char)0;
+ this.val = work[sym];
}
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate new table */
- if (*hn + z > MANY) /* (note: doesn't matter for fixed) */
- return Z_DATA_ERROR; /* overflow of MANY */
- u[h] = q = hp + *hn;
- *hn += z;
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- j = i >> (w - l);
- r.base = (uInt)(q - u[h-1] - j); /* offset to this table */
- u[h-1][j] = r; /* connect to last table */
+ else if ((int)(work[sym]) > end) {
+ this.op = (unsigned char)(extra[work[sym]]);
+ this.val = base[work[sym]];
+ }
+ else {
+ this.op = (unsigned char)(32 + 64); /* end of block */
+ this.val = 0;
}
- else
- *t = q; /* first table is returned result */
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- mask = (1 << w) - 1; /* needed on HP, cc -O bug */
- while ((i & mask) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- mask = (1 << w) - 1;
- }
- }
- }
+ /* replicate for those indices with low len bits equal to huff */
+ incr = 1U << (len - drop);
+ fill = 1U << curr;
+ min = fill; /* save offset to next table */
+ do {
+ fill -= incr;
+ next[(huff >> drop) + fill] = this;
+ } while (fill != 0);
+
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
+ /* go to next symbol, update count, len */
+ sym++;
+ if (--(count[len]) == 0) {
+ if (len == max) break;
+ len = lens[work[sym]];
+ }
+ /* create new sub-table if needed */
+ if (len > root && (huff & mask) != low) {
+ /* if first time, transition to sub-tables */
+ if (drop == 0)
+ drop = root;
+
+ /* increment past last table */
+ next += min; /* here min is 1 << curr */
+
+ /* determine length of next table */
+ curr = len - drop;
+ left = (int)(1 << curr);
+ while (curr + drop < max) {
+ left -= count[curr + drop];
+ if (left <= 0) break;
+ curr++;
+ left <<= 1;
+ }
-int zlib_inflate_trees_bits(
- uInt *c, /* 19 code lengths */
- uInt *bb, /* bits tree desired/actual depth */
- inflate_huft **tb, /* bits tree result */
- inflate_huft *hp, /* space for trees */
- z_streamp z /* for messages */
-)
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uInt *v; /* work area for huft_build */
-
- v = WS(z)->tree_work_area_1;
- r = huft_build(c, 19, 19, NULL, NULL, tb, bb, hp, &hn, v);
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR || *bb == 0)
- {
- z->msg = (char*)"incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- return r;
-}
+ /* check for enough space */
+ used += 1U << curr;
+ if (type == LENS && used >= ENOUGH - MAXD)
+ return 1;
-int zlib_inflate_trees_dynamic(
- uInt nl, /* number of literal/length codes */
- uInt nd, /* number of distance codes */
- uInt *c, /* that many (total) code lengths */
- uInt *bl, /* literal desired/actual bit depth */
- uInt *bd, /* distance desired/actual bit depth */
- inflate_huft **tl, /* literal/length tree result */
- inflate_huft **td, /* distance tree result */
- inflate_huft *hp, /* space for trees */
- z_streamp z /* for messages */
-)
-{
- int r;
- uInt hn = 0; /* hufts used in space */
- uInt *v; /* work area for huft_build */
-
- /* allocate work area */
- v = WS(z)->tree_work_area_2;
-
- /* build literal/length tree */
- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
- if (r != Z_OK || *bl == 0)
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed literal/length tree";
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- return r;
- }
-
- /* build distance tree */
- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
- if (r != Z_OK || (*bd == 0 && nl > 257))
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed distance tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- z->msg = (char*)"incomplete distance tree";
- r = Z_DATA_ERROR;
- }
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"empty distance tree with lengths";
- r = Z_DATA_ERROR;
+ /* point entry in root table to sub-table */
+ low = huff & mask;
+ (*table)[low].op = (unsigned char)curr;
+ (*table)[low].bits = (unsigned char)root;
+ (*table)[low].val = (unsigned short)(next - *table);
+ }
}
- return r;
-#endif
- }
- /* done */
- return Z_OK;
-}
+ /*
+ Fill in rest of table for incomplete codes. This loop is similar to the
+ loop above in incrementing huff for table indices. It is assumed that
+ len is equal to curr + drop, so there is no loop needed to increment
+ through high index bits. When the current sub-table is filled, the loop
+ drops back to the root table to fill in any remaining entries there.
+ */
+ this.op = (unsigned char)64; /* invalid code marker */
+ this.bits = (unsigned char)(len - drop);
+ this.val = (unsigned short)0;
+ while (huff != 0) {
+ /* when done with sub-table, drop back to root table */
+ if (drop != 0 && (huff & mask) != low) {
+ drop = 0;
+ len = root;
+ next = *table;
+ this.bits = (unsigned char)len;
+ }
+ /* put invalid code marker in table */
+ next[huff >> drop] = this;
-int zlib_inflate_trees_fixed(
- uInt *bl, /* literal desired/actual bit depth */
- uInt *bd, /* distance desired/actual bit depth */
- inflate_huft **tl, /* literal/length tree result */
- inflate_huft **td, /* distance tree result */
- inflate_huft *hp, /* space for trees */
- z_streamp z /* for memory allocation */
-)
-{
- int i; /* temporary variable */
- unsigned l[288]; /* length list for huft_build */
- uInt *v; /* work area for huft_build */
-
- /* set up literal table */
- for (i = 0; i < 144; i++)
- l[i] = 8;
- for (; i < 256; i++)
- l[i] = 9;
- for (; i < 280; i++)
- l[i] = 7;
- for (; i < 288; i++) /* make a complete, but wrong code set */
- l[i] = 8;
- *bl = 9;
- v = WS(z)->tree_work_area_1;
- if ((i = huft_build(l, 288, 257, cplens, cplext, tl, bl, hp, &i, v)) != 0)
- return i;
-
- /* set up distance table */
- for (i = 0; i < 30; i++) /* make an incomplete code set */
- l[i] = 5;
- *bd = 5;
- if ((i = huft_build(l, 30, 0, cpdist, cpdext, td, bd, hp, &i, v)) > 1)
- return i;
-
- return Z_OK;
+ /* backwards increment the len-bit code huff */
+ incr = 1U << (len - 1);
+ while (huff & incr)
+ incr >>= 1;
+ if (incr != 0) {
+ huff &= incr - 1;
+ huff += incr;
+ }
+ else
+ huff = 0;
+ }
+
+ /* set return parameters */
+ *table += used;
+ *bits = root;
+ return 0;
}
diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h
index e37705adc00..5f5219b1240 100644
--- a/lib/zlib_inflate/inftrees.h
+++ b/lib/zlib_inflate/inftrees.h
@@ -1,6 +1,6 @@
/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
+ * Copyright (C) 1995-2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
@@ -8,57 +8,48 @@
subject to change. Applications should only use zlib.h.
*/
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-#ifndef _INFTREES_H
-#define _INFTREES_H
-
-typedef struct inflate_huft_s inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- uInt pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit int's) */
- uInt base; /* literal, length base, distance base,
- or table offset */
-};
+/* Structure for decoding tables. Each entry provides either the
+ information needed to do the operation requested by the code that
+ indexed that table entry, or it provides a pointer to another
+ table that indexes more bits of the code. op indicates whether
+ the entry is a pointer to another table, a literal, a length or
+ distance, an end-of-block, or an invalid code. For a table
+ pointer, the low four bits of op is the number of index bits of
+ that table. For a length or distance, the low four bits of op
+ is the number of extra bits to get after the code. bits is
+ the number of bits in this code or part of the code to drop off
+ of the bit buffer. val is the actual byte to output in the case
+ of a literal, the base length or distance, or the offset from
+ the current table to the next table. Each entry is four bytes. */
+typedef struct {
+ unsigned char op; /* operation, extra bits, table bits */
+ unsigned char bits; /* bits in this part of the code */
+ unsigned short val; /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+ 00000000 - literal
+ 0000tttt - table link, tttt != 0 is the number of table index bits
+ 0001eeee - length or distance, eeee is the number of extra bits
+ 01100000 - end of block
+ 01000000 - invalid code
+ */
/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 huft structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
- exhaustive search). The actual maximum is not known, but the
- value below is more than safe. */
-#define MANY 1440
-
-extern int zlib_inflate_trees_bits (
- uInt *, /* 19 code lengths */
- uInt *, /* bits tree desired/actual depth */
- inflate_huft **, /* bits tree result */
- inflate_huft *, /* space for trees */
- z_streamp); /* for messages */
-
-extern int zlib_inflate_trees_dynamic (
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uInt *, /* that many (total) code lengths */
- uInt *, /* literal desired/actual bit depth */
- uInt *, /* distance desired/actual bit depth */
- inflate_huft **, /* literal/length tree result */
- inflate_huft **, /* distance tree result */
- inflate_huft *, /* space for trees */
- z_streamp); /* for messages */
-
-extern int zlib_inflate_trees_fixed (
- uInt *, /* literal desired/actual bit depth */
- uInt *, /* distance desired/actual bit depth */
- inflate_huft **, /* literal/length tree result */
- inflate_huft **, /* distance tree result */
- inflate_huft *, /* space for trees */
- z_streamp); /* for memory allocation */
-
-#endif /* _INFTREES_H */
+ exhaustive search was 1444 code structures (852 for length/literals
+ and 592 for distances, the latter actually the result of an
+ exhaustive search). The true maximum is not known, but the value
+ below is more than safe. */
+#define ENOUGH 2048
+#define MAXD 592
+
+/* Type of code to build for inftable() */
+typedef enum {
+ CODES,
+ LENS,
+ DISTS
+} codetype;
+
+extern int zlib_inflate_table (codetype type, unsigned short *lens,
+ unsigned codes, code **table,
+ unsigned *bits, unsigned short *work);
diff --git a/lib/zlib_inflate/infutil.c b/lib/zlib_inflate/infutil.c
deleted file mode 100644
index 00202b3438e..00000000000
--- a/lib/zlib_inflate/infutil.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1998 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include <linux/zutil.h>
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-struct inflate_codes_state;
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt zlib_inflate_mask[17] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int zlib_inflate_flush(
- inflate_blocks_statef *s,
- z_streamp z,
- int r
-)
-{
- uInt n;
- Byte *p;
- Byte *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- memcpy(p, q, n);
- p += n;
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- memcpy(p, q, n);
- p += n;
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
diff --git a/lib/zlib_inflate/infutil.h b/lib/zlib_inflate/infutil.h
index a15875fc5f7..eb1a9007bd8 100644
--- a/lib/zlib_inflate/infutil.h
+++ b/lib/zlib_inflate/infutil.h
@@ -11,184 +11,12 @@
#ifndef _INFUTIL_H
#define _INFUTIL_H
-#include <linux/zconf.h>
-#include "inftrees.h"
-#include "infcodes.h"
-
-typedef enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- B_DONE, /* finished last block, done */
- B_BAD} /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- inflate_block_mode mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uInt *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- inflate_huft *hufts; /* single malloc for tree space */
- Byte *window; /* sliding window */
- Byte *end; /* one byte after sliding window */
- Byte *read; /* window read pointer */
- Byte *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return zlib_inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=zlib_inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt zlib_inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int zlib_inflate_flush (
- inflate_blocks_statef *,
- z_streamp ,
- int);
-
-/* inflate private state */
-typedef enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- DICT4, /* four dictionary check bytes to go */
- DICT3, /* three dictionary check bytes to go */
- DICT2, /* two dictionary check bytes to go */
- DICT1, /* one dictionary check byte to go */
- DICT0, /* waiting for inflateSetDictionary */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- I_DONE, /* finished check, done */
- I_BAD} /* got an error--stay here */
-inflate_mode;
-
-struct internal_state {
-
- /* mode */
- inflate_mode mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-/* inflate codes private state */
-typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
-inflate_codes_mode;
-
-struct inflate_codes_state {
-
- /* mode */
- inflate_codes_mode mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
+#include <linux/zlib.h>
/* memory allocation for inflation */
struct inflate_workspace {
- inflate_codes_statef working_state;
- struct inflate_blocks_state working_blocks_state;
- struct internal_state internal_state;
- unsigned int tree_work_area_1[19];
- unsigned int tree_work_area_2[288];
- unsigned working_blens[258 + 0x1f + 0x1f];
- inflate_huft working_hufts[MANY];
+ struct inflate_state inflate_state;
unsigned char working_window[1 << MAX_WBITS];
};