diff options
Diffstat (limited to 'sound/soc/blackfin/bf5xx-ssm2602.c')
| -rw-r--r-- | sound/soc/blackfin/bf5xx-ssm2602.c | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/sound/soc/blackfin/bf5xx-ssm2602.c b/sound/soc/blackfin/bf5xx-ssm2602.c new file mode 100644 index 00000000000..e15f67fd776 --- /dev/null +++ b/sound/soc/blackfin/bf5xx-ssm2602.c @@ -0,0 +1,186 @@ +/* + * File: sound/soc/blackfin/bf5xx-ssm2602.c + * Author: Cliff Cai <Cliff.Cai@analog.com> + * + * Created: Tue June 06 2008 + * Description: board driver for SSM2602 sound chip + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm_params.h> + +#include <asm/dma.h> +#include <asm/portmux.h> +#include <linux/gpio.h> +#include "../codecs/ssm2602.h" +#include "bf5xx-sport.h" +#include "bf5xx-i2s-pcm.h" +#include "bf5xx-i2s.h" + +static struct snd_soc_machine bf5xx_ssm2602; + +static int bf5xx_ssm2602_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + + pr_debug("%s enter\n", __func__); + cpu_dai->private_data = sport_handle; + return 0; +} + +static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int clk = 0; + int ret = 0; + + pr_debug("%s rate %d format %x\n", __func__, params_rate(params), + params_format(params)); + /* + * If you are using a crystal source which frequency is not 12MHz + * then modify the below case statement with frequency of the crystal. + * + * If you are using the SPORT to generate clocking then this is + * where to do it. + */ + + switch (params_rate(params)) { + case 8000: + case 16000: + case 48000: + case 96000: + case 11025: + case 22050: + case 44100: + clk = 12000000; + break; + } + + /* + * CODEC is master for BCLK and LRC in this configuration. + */ + + /* set codec DAI configuration */ + ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + /* set cpu DAI configuration */ + ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + ret = codec_dai->dai_ops.set_sysclk(codec_dai, SSM2602_SYSCLK, clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops bf5xx_ssm2602_ops = { + .startup = bf5xx_ssm2602_startup, + .hw_params = bf5xx_ssm2602_hw_params, +}; + +static struct snd_soc_dai_link bf5xx_ssm2602_dai = { + .name = "ssm2602", + .stream_name = "SSM2602", + .cpu_dai = &bf5xx_i2s_dai, + .codec_dai = &ssm2602_dai, + .ops = &bf5xx_ssm2602_ops, +}; + +/* + * SSM2602 2 wire address is determined by CSB + * state during powerup. + * low = 0x1a + * high = 0x1b + */ + +static struct ssm2602_setup_data bf5xx_ssm2602_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_machine bf5xx_ssm2602 = { + .name = "bf5xx_ssm2602", + .dai_link = &bf5xx_ssm2602_dai, + .num_links = 1, +}; + +static struct snd_soc_device bf5xx_ssm2602_snd_devdata = { + .machine = &bf5xx_ssm2602, + .platform = &bf5xx_i2s_soc_platform, + .codec_dev = &soc_codec_dev_ssm2602, + .codec_data = &bf5xx_ssm2602_setup, +}; + +static struct platform_device *bf52x_ssm2602_snd_device; + +static int __init bf5xx_ssm2602_init(void) +{ + int ret; + + pr_debug("%s enter\n", __func__); + bf52x_ssm2602_snd_device = platform_device_alloc("soc-audio", -1); + if (!bf52x_ssm2602_snd_device) + return -ENOMEM; + + platform_set_drvdata(bf52x_ssm2602_snd_device, + &bf5xx_ssm2602_snd_devdata); + bf5xx_ssm2602_snd_devdata.dev = &bf52x_ssm2602_snd_device->dev; + ret = platform_device_add(bf52x_ssm2602_snd_device); + + if (ret) + platform_device_put(bf52x_ssm2602_snd_device); + + return ret; +} + +static void __exit bf5xx_ssm2602_exit(void) +{ + pr_debug("%s enter\n", __func__); + platform_device_unregister(bf52x_ssm2602_snd_device); +} + +module_init(bf5xx_ssm2602_init); +module_exit(bf5xx_ssm2602_exit); + +/* Module information */ +MODULE_AUTHOR("Cliff Cai"); +MODULE_DESCRIPTION("ALSA SoC SSM2602 BF527-EZKIT"); +MODULE_LICENSE("GPL"); + |