summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c268
1 files changed, 96 insertions, 172 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index bf08282d5ee..f5d73ed72cb 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -213,10 +213,12 @@ static u16 wm8903_reg_defaults[] = {
};
struct wm8903_priv {
- struct snd_soc_codec codec;
+
u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
int sysclk;
+ struct i2c_client *control_data;
+ int irq;
/* Reference counts */
int class_w_users;
@@ -252,7 +254,6 @@ static int wm8903_volatile_register(unsigned int reg)
static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
{
u16 reg[5];
- struct i2c_client *i2c = codec->control_data;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
BUG_ON(start > 48);
@@ -262,7 +263,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] | WM8903_WSEQ_ENA);
- dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
+ dev_dbg(codec->dev, "Starting sequence at %d\n", start);
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
start | WM8903_WSEQ_START);
@@ -277,7 +278,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
} while (reg[4] & WM8903_WSEQ_BUSY);
- dev_dbg(&i2c->dev, "Sequence complete\n");
+ dev_dbg(codec->dev, "Sequence complete\n");
/* Disable the sequencer again if we enabled it */
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
@@ -422,7 +423,6 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
struct snd_soc_codec *codec = widget->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c = codec->control_data;
u16 reg;
int ret;
@@ -431,7 +431,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 0) {
- dev_dbg(&i2c->dev, "Disabling Class W\n");
+ dev_dbg(codec->dev, "Disabling Class W\n");
snd_soc_write(codec, WM8903_CLASS_W_0, reg &
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
}
@@ -444,14 +444,14 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
/* If we've just disabled the last bypass path turn Class W on */
if (!ucontrol->value.integer.value[0]) {
if (wm8903->class_w_users == 1) {
- dev_dbg(&i2c->dev, "Enabling Class W\n");
+ dev_dbg(codec->dev, "Enabling Class W\n");
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
wm8903->class_w_users--;
}
- dev_dbg(&i2c->dev, "Bypass use count now %d\n",
+ dev_dbg(codec->dev, "Bypass use count now %d\n",
wm8903->class_w_users);
return ret;
@@ -935,7 +935,6 @@ static int wm8903_add_widgets(struct snd_soc_codec *codec)
static int wm8903_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- struct i2c_client *i2c = codec->control_data;
u16 reg, reg2;
switch (level) {
@@ -974,7 +973,7 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
/* By default no bypass paths are enabled so
* enable Class W support.
*/
- dev_dbg(&i2c->dev, "Enabling Class W\n");
+ dev_dbg(codec->dev, "Enabling Class W\n");
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
}
@@ -1228,10 +1227,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_codec *codec = rtd->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c = codec->control_data;
struct snd_pcm_runtime *master_runtime;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -1245,7 +1242,7 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
if (wm8903->master_substream) {
master_runtime = wm8903->master_substream->runtime;
- dev_dbg(&i2c->dev, "Constraining to %d bits\n",
+ dev_dbg(codec->dev, "Constraining to %d bits\n",
master_runtime->sample_bits);
snd_pcm_hw_constraint_minmax(substream->runtime,
@@ -1264,8 +1261,7 @@ static void wm8903_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_codec *codec = rtd->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -1284,10 +1280,8 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->card->codec;
+ struct snd_soc_codec *codec =rtd->codec;
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
- struct i2c_client *i2c = codec->control_data;
int fs = params_rate(params);
int bclk;
int bclk_div;
@@ -1306,7 +1300,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
if (substream == wm8903->slave_substream) {
- dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+ dev_dbg(codec->dev, "Ignoring hw_params for slave substream\n");
return 0;
}
@@ -1332,7 +1326,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
switch (sample_rates[dsp_config].rate) {
case 88200:
case 96000:
- dev_err(&i2c->dev, "%dHz unsupported by ADC\n",
+ dev_err(codec->dev, "%dHz unsupported by ADC\n",
fs);
return -EINVAL;
@@ -1340,7 +1334,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
break;
}
- dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
+ dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
clock1 |= sample_rates[dsp_config].value;
@@ -1366,7 +1360,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n",
+ dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n",
wm8903->sysclk, fs);
/* We may not have an MCLK which allows us to generate exactly
@@ -1401,12 +1395,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
- dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
+ dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
clk_sys_ratios[clk_config].rate,
clk_sys_ratios[clk_config].mode,
clk_sys_ratios[clk_config].div);
- dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
+ dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
/* We may not get quite the right frequency if using
* approximate clocks so look for the closest match that is
@@ -1428,7 +1422,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
aif2 &= ~WM8903_BCLK_DIV_MASK;
aif3 &= ~WM8903_LRCLK_RATE_MASK;
- dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
+ dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
bclk_divs[bclk_div].ratio / 10, bclk,
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
@@ -1504,8 +1498,8 @@ EXPORT_SYMBOL_GPL(wm8903_mic_detect);
static irqreturn_t wm8903_irq(int irq, void *data)
{
- struct wm8903_priv *wm8903 = data;
- struct snd_soc_codec *codec = &wm8903->codec;
+ struct snd_soc_codec *codec = data;
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
int mic_report;
int int_pol;
int int_val = 0;
@@ -1586,8 +1580,8 @@ static struct snd_soc_dai_ops wm8903_dai_ops = {
.set_sysclk = wm8903_set_dai_sysclk,
};
-struct snd_soc_dai wm8903_dai = {
- .name = "WM8903",
+static struct snd_soc_dai_driver wm8903_dai = {
+ .name = "wm8903-hifi",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
@@ -1605,23 +1599,16 @@ struct snd_soc_dai wm8903_dai = {
.ops = &wm8903_dai_ops,
.symmetric_rates = 1,
};
-EXPORT_SYMBOL_GPL(wm8903_dai);
-static int wm8903_suspend(struct platform_device *pdev, pm_message_t state)
+static int wm8903_suspend(struct snd_soc_codec *codec, pm_message_t state)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
-static int wm8903_resume(struct platform_device *pdev)
+static int wm8903_resume(struct snd_soc_codec *codec)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
- struct i2c_client *i2c = codec->control_data;
int i;
u16 *reg_cache = codec->reg_cache;
u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
@@ -1637,65 +1624,38 @@ static int wm8903_resume(struct platform_device *pdev)
snd_soc_write(codec, i, tmp_cache[i]);
kfree(tmp_cache);
} else {
- dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
+ dev_err(codec->dev, "Failed to allocate temporary cache\n");
}
return 0;
}
-static struct snd_soc_codec *wm8903_codec;
-
-static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int wm8903_probe(struct snd_soc_codec *codec)
{
- struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
- struct wm8903_priv *wm8903;
- struct snd_soc_codec *codec;
+ struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
int ret, i;
int trigger, irq_pol;
u16 val;
- wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
- if (wm8903 == NULL)
- return -ENOMEM;
-
- codec = &wm8903->codec;
-
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
-
- codec->dev = &i2c->dev;
- codec->name = "WM8903";
- codec->owner = THIS_MODULE;
- codec->bias_level = SND_SOC_BIAS_OFF;
- codec->set_bias_level = wm8903_set_bias_level;
- codec->dai = &wm8903_dai;
- codec->num_dai = 1;
- codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
- codec->reg_cache = &wm8903->reg_cache[0];
- snd_soc_codec_set_drvdata(codec, wm8903);
- codec->volatile_register = wm8903_volatile_register;
init_completion(&wm8903->wseq);
-
- i2c_set_clientdata(i2c, codec);
- codec->control_data = i2c;
+ codec->control_data = wm8903->control_data;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
if (ret != 0) {
- dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
- goto err;
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
}
val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
- dev_err(&i2c->dev,
+ dev_err(codec->dev,
"Device with ID register %x is not a WM8903\n", val);
return -ENODEV;
}
val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
- dev_info(&i2c->dev, "WM8903 revision %d\n",
+ dev_info(codec->dev, "WM8903 revision %d\n",
val & WM8903_CHIP_REV_MASK);
wm8903_reset(codec);
@@ -1721,7 +1681,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
wm8903->mic_delay = pdata->micdet_delay;
}
- if (i2c->irq) {
+ if (wm8903->irq) {
if (pdata && pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8903_IRQ_POL;
@@ -1733,13 +1693,13 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL,
WM8903_IRQ_POL, irq_pol);
- ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
+ ret = request_threaded_irq(wm8903->irq, NULL, wm8903_irq,
trigger | IRQF_ONESHOT,
- "wm8903", wm8903);
+ "wm8903", codec);
if (ret != 0) {
- dev_err(&i2c->dev, "Failed to request IRQ: %d\n",
+ dev_err(codec->dev, "Failed to request IRQ: %d\n",
ret);
- goto err;
+ return ret;
}
/* Enable write sequencer interrupts */
@@ -1781,133 +1741,97 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
val |= WM8903_DAC_MUTEMODE;
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val);
- wm8903_dai.dev = &i2c->dev;
- wm8903_codec = codec;
-
- ret = snd_soc_register_codec(codec);
- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
- goto err_irq;
- }
-
- ret = snd_soc_register_dai(&wm8903_dai);
- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
- goto err_codec;
- }
-
- return ret;
+ snd_soc_add_controls(codec, wm8903_snd_controls,
+ ARRAY_SIZE(wm8903_snd_controls));
+ wm8903_add_widgets(codec);
-err_codec:
- snd_soc_unregister_codec(codec);
-err_irq:
- if (i2c->irq)
- free_irq(i2c->irq, wm8903);
-err:
- wm8903_codec = NULL;
- kfree(wm8903);
return ret;
}
-static __devexit int wm8903_i2c_remove(struct i2c_client *client)
+/* power down chip */
+static int wm8903_remove(struct snd_soc_codec *codec)
{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- struct wm8903_priv *priv = snd_soc_codec_get_drvdata(codec);
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
- snd_soc_unregister_dai(&wm8903_dai);
- snd_soc_unregister_codec(codec);
+static struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
+ .probe = wm8903_probe,
+ .remove = wm8903_remove,
+ .suspend = wm8903_suspend,
+ .resume = wm8903_resume,
+ .set_bias_level = wm8903_set_bias_level,
+ .reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults),
+ .reg_word_size = sizeof(u16),
+ .reg_cache_default = wm8903_reg_defaults,
+ .volatile_register = wm8903_volatile_register,
+};
- wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8903_priv *wm8903;
+ int ret;
- if (client->irq)
- free_irq(client->irq, priv);
+ wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+ if (wm8903 == NULL)
+ return -ENOMEM;
- kfree(priv);
+ i2c_set_clientdata(i2c, wm8903);
+ wm8903->control_data = i2c;
+ wm8903->irq = i2c->irq;
- wm8903_codec = NULL;
- wm8903_dai.dev = NULL;
+ ret = snd_soc_register_codec(&i2c->dev,
+ &soc_codec_dev_wm8903, &wm8903_dai, 1);
+ if (ret < 0)
+ kfree(wm8903);
+ return ret;
+}
+static __devexit int wm8903_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+ kfree(i2c_get_clientdata(client));
return 0;
}
-/* i2c codec control layer */
static const struct i2c_device_id wm8903_i2c_id[] = {
- { "wm8903", 0 },
- { }
+ { "wm8903", 0 },
+ { }
};
MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
static struct i2c_driver wm8903_i2c_driver = {
.driver = {
- .name = "WM8903",
+ .name = "wm8903-codec",
.owner = THIS_MODULE,
},
- .probe = wm8903_i2c_probe,
- .remove = __devexit_p(wm8903_i2c_remove),
+ .probe = wm8903_i2c_probe,
+ .remove = __devexit_p(wm8903_i2c_remove),
.id_table = wm8903_i2c_id,
};
+#endif
-static int wm8903_probe(struct platform_device *pdev)
+static int __init wm8903_modinit(void)
{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
int ret = 0;
-
- if (!wm8903_codec) {
- dev_err(&pdev->dev, "I2C device not yet probed\n");
- goto err;
- }
-
- socdev->card->codec = wm8903_codec;
-
- /* register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to create pcms\n");
- goto err;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ ret = i2c_add_driver(&wm8903_i2c_driver);
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to register wm8903 I2C driver: %d\n",
+ ret);
}
-
- snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls,
- ARRAY_SIZE(wm8903_snd_controls));
- wm8903_add_widgets(socdev->card->codec);
-
+#endif
return ret;
-
-err:
- return ret;
-}
-
-/* power down chip */
-static int wm8903_remove(struct platform_device *pdev)
-{
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->card->codec;
-
- if (codec->control_data)
- wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-
- return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8903 = {
- .probe = wm8903_probe,
- .remove = wm8903_remove,
- .suspend = wm8903_suspend,
- .resume = wm8903_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
-
-static int __init wm8903_modinit(void)
-{
- return i2c_add_driver(&wm8903_i2c_driver);
}
module_init(wm8903_modinit);
static void __exit wm8903_exit(void)
{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8903_i2c_driver);
+#endif
}
module_exit(wm8903_exit);