diff options
Diffstat (limited to 'sound/soc/s3c24xx/s3c24xx_uda134x.c')
| -rw-r--r-- | sound/soc/s3c24xx/s3c24xx_uda134x.c | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c new file mode 100644 index 00000000000..a0a4d1832a1 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c @@ -0,0 +1,373 @@ +/* + * Modifications by Christian Pellegrin <chripell@evolware.org> + * + * s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver + * + * Copyright 2007 Dension Audio Systems Ltd. + * Author: Zoltan Devai + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/s3c24xx_uda134x.h> +#include <sound/uda134x.h> + +#include <asm/plat-s3c24xx/regs-iis.h> + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "../codecs/uda134x.h" + + +/* #define ENFORCE_RATES 1 */ +/* + Unfortunately the S3C24XX in master mode has a limited capacity of + generating the clock for the codec. If you define this only rates + that are really available will be enforced. But be careful, most + user level application just want the usual sampling frequencies (8, + 11.025, 22.050, 44.1 kHz) and anyway resampling is a costly + operation for embedded systems. So if you aren't very lucky or your + hardware engineer wasn't very forward-looking it's better to leave + this undefined. If you do so an approximate value for the requested + sampling rate in the range -/+ 5% will be chosen. If this in not + possible an error will be returned. +*/ + +static struct clk *xtal; +static struct clk *pclk; +/* this is need because we don't have a place where to keep the + * pointers to the clocks in each substream. We get the clocks only + * when we are actually using them so we don't block stuff like + * frequency change or oscillator power-off */ +static int clk_users; +static DEFINE_MUTEX(clk_lock); + +static unsigned int rates[33 * 2]; +#ifdef ENFORCE_RATES +static struct snd_pcm_hw_constraint_list hw_constraints_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, +}; +#endif + +static struct platform_device *s3c24xx_uda134x_snd_device; + +static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) +{ + int ret = 0; +#ifdef ENFORCE_RATES + struct snd_pcm_runtime *runtime = substream->runtime;; +#endif + + mutex_lock(&clk_lock); + pr_debug("%s %d\n", __func__, clk_users); + if (clk_users == 0) { + xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal"); + if (!xtal) { + printk(KERN_ERR "%s cannot get xtal\n", __func__); + ret = -EBUSY; + } else { + pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, + "pclk"); + if (!pclk) { + printk(KERN_ERR "%s cannot get pclk\n", + __func__); + clk_put(xtal); + ret = -EBUSY; + } + } + if (!ret) { + int i, j; + + for (i = 0; i < 2; i++) { + int fs = i ? 256 : 384; + + rates[i*33] = clk_get_rate(xtal) / fs; + for (j = 1; j < 33; j++) + rates[i*33 + j] = clk_get_rate(pclk) / + (j * fs); + } + } + } + clk_users += 1; + mutex_unlock(&clk_lock); + if (!ret) { +#ifdef ENFORCE_RATES + ret = snd_pcm_hw_constraint_list(runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &hw_constraints_rates); + if (ret < 0) + printk(KERN_ERR "%s cannot set constraints\n", + __func__); +#endif + } + return ret; +} + +static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream) +{ + mutex_lock(&clk_lock); + pr_debug("%s %d\n", __func__, clk_users); + clk_users -= 1; + if (clk_users == 0) { + clk_put(xtal); + xtal = NULL; + clk_put(pclk); + pclk = NULL; + } + mutex_unlock(&clk_lock); +} + +static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + unsigned int clk = 0; + int ret = 0; + int clk_source, fs_mode; + unsigned long rate = params_rate(params); + long err, cerr; + unsigned int div; + int i, bi; + + err = 999999; + bi = 0; + for (i = 0; i < 2*33; i++) { + cerr = rates[i] - rate; + if (cerr < 0) + cerr = -cerr; + if (cerr < err) { + err = cerr; + bi = i; + } + } + if (bi / 33 == 1) + fs_mode = S3C2410_IISMOD_256FS; + else + fs_mode = S3C2410_IISMOD_384FS; + if (bi % 33 == 0) { + clk_source = S3C24XX_CLKSRC_MPLL; + div = 1; + } else { + clk_source = S3C24XX_CLKSRC_PCLK; + div = bi % 33; + } + pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi); + + clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate; + pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__, + fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS", + clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK", + div, clk, err); + + if ((err * 100 / rate) > 5) { + printk(KERN_ERR "S3C24XX_UDA134X: effective frequency " + "too different from desired (%ld%%)\n", + err * 100 / rate); + return -EINVAL; + } + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, + S3C2410_IISMOD_32FS); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + S3C24XX_PRESCALE(div, div)); + if (ret < 0) + return ret; + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, + SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops s3c24xx_uda134x_ops = { + .startup = s3c24xx_uda134x_startup, + .shutdown = s3c24xx_uda134x_shutdown, + .hw_params = s3c24xx_uda134x_hw_params, +}; + +static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { + .name = "UDA134X", + .stream_name = "UDA134X", + .codec_dai = &uda134x_dai, + .cpu_dai = &s3c24xx_i2s_dai, + .ops = &s3c24xx_uda134x_ops, +}; + +static struct snd_soc_card snd_soc_s3c24xx_uda134x = { + .name = "S3C24XX_UDA134X", + .platform = &s3c24xx_soc_platform, + .dai_link = &s3c24xx_uda134x_dai_link, + .num_links = 1, +}; + +static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins; + +static void setdat(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0); +} + +static void setclk(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0); +} + +static void setmode(int v) +{ + gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0); +} + +static struct uda134x_platform_data s3c24xx_uda134x = { + .l3 = { + .setdat = setdat, + .setclk = setclk, + .setmode = setmode, + .data_hold = 1, + .data_setup = 1, + .clock_high = 1, + .mode_hold = 1, + .mode = 1, + .mode_setup = 1, + }, +}; + +static struct snd_soc_device s3c24xx_uda134x_snd_devdata = { + .card = &snd_soc_s3c24xx_uda134x, + .codec_dev = &soc_codec_dev_uda134x, + .codec_data = &s3c24xx_uda134x, +}; + +static int s3c24xx_uda134x_setup_pin(int pin, char *fun) +{ + if (gpio_request(pin, "s3c24xx_uda134x") < 0) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "l3 %s pin already in use", fun); + return -EBUSY; + } + gpio_direction_output(pin, 0); + return 0; +} + +static int s3c24xx_uda134x_probe(struct platform_device *pdev) +{ + int ret; + + printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n"); + + s3c24xx_uda134x_l3_pins = pdev->dev.platform_data; + if (s3c24xx_uda134x_l3_pins == NULL) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "unable to find platform data\n"); + return -ENODEV; + } + s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power; + s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model; + + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data, + "data") < 0) + return -EBUSY; + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk, + "clk") < 0) { + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + return -EBUSY; + } + if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode, + "mode") < 0) { + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); + return -EBUSY; + } + + s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1); + if (!s3c24xx_uda134x_snd_device) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " + "Unable to register\n"); + return -ENOMEM; + } + + platform_set_drvdata(s3c24xx_uda134x_snd_device, + &s3c24xx_uda134x_snd_devdata); + s3c24xx_uda134x_snd_devdata.dev = &s3c24xx_uda134x_snd_device->dev; + ret = platform_device_add(s3c24xx_uda134x_snd_device); + if (ret) { + printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n"); + platform_device_put(s3c24xx_uda134x_snd_device); + } + + return ret; +} + +static int s3c24xx_uda134x_remove(struct platform_device *pdev) +{ + platform_device_unregister(s3c24xx_uda134x_snd_device); + gpio_free(s3c24xx_uda134x_l3_pins->l3_data); + gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); + gpio_free(s3c24xx_uda134x_l3_pins->l3_mode); + return 0; +} + +static struct platform_driver s3c24xx_uda134x_driver = { + .probe = s3c24xx_uda134x_probe, + .remove = s3c24xx_uda134x_remove, + .driver = { + .name = "s3c24xx_uda134x", + .owner = THIS_MODULE, + }, +}; + +static int __init s3c24xx_uda134x_init(void) +{ + return platform_driver_register(&s3c24xx_uda134x_driver); +} + +static void __exit s3c24xx_uda134x_exit(void) +{ + platform_driver_unregister(&s3c24xx_uda134x_driver); +} + + +module_init(s3c24xx_uda134x_init); +module_exit(s3c24xx_uda134x_exit); + +MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>"); +MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver"); +MODULE_LICENSE("GPL"); |