summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-02-09ipw2x00: correct Kconfig to prevent following entries from not indentingJay Sternberg
not defining dependencies for LIBIPW caused the following entries to not be indented. changing this entry to depend on PCI && WLAN_80211 corrects this issue Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: remove chain noise calibration functions from 6000 familyJay Sternberg
redefine structures that contain function pointer for chain noise reset and chain noise gain for the 6000 family since these are not needed. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: define structures and functions externally for customizationJay Sternberg
defined the structures and functions as extern to alter behavior used by 5000 series for other products including 100 and 6000 series Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: correct API command overlapJay Sternberg
Correct the API commands where same command id used for two different commands. Update max api versions for affected devices. TX_ANT_CONFIGURATION_CMD was already using id 0x98, so REPLY_TX_POWER_DBM_CMD moved to 0x95 Older API interfaces may used original value so V1 defines provided. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: parametrize configuration of the PLL for exclusion on 6000Jay Sternberg
added a config parameter to enable setting PLL_CFG. older hardware has this parameter set true. the 6000 family does not support this setting, so this parameter set false. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: simplify parameter setting to allow support for 6000 seriesJay Sternberg
by parametrizing the set hw function, in addition to allowing for supporting the 6000 family significantly simplify the addition of new hardware. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: add new HW_REV_TYPEs for Intel WiFi Link 100, 6000 and 6050 SeriesJay Sternberg
simply add definitions for the HW_REV_TYPEs for the new devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: IBSS join reworkAlina Friedrichsen
I hold back this patch for around a week to avoid confusion. This is the second step of "mac80211: Fixed BSSID handling revisited". With it, in the situation of a strange merge to the same BSSID (e.g. caused by a TSF overflow) only reset_tsf() is called. And sta_info_flush_delayed() is only called if you change the network manually, not on an automatic BSSID merge. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Fix LED blink patternVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: Creating new IBSS with fixed BSSIDAlina Friedrichsen
This fixes a bug when creating a new IBSS network with a fixed BSSID. The fixed BSSID situation is now with one of my last patches handled in ieee80211_sta_find_ibss() function. It's more robust to test against (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET), because ifsta->state is not seted right in every situation and so the creating of the new IBSS network sometimes hangs after the first try to scan for a network to merge. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Remove a bunch of unused macrosSujith
RX filter masks are already defined in enum ath9k_rx_filter in ath9k.h Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Fix typo in checking for chip revisionSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09mac80211: Reset assoc_scan_tries after an unsuccessful scan runSujith
Trying to associate with a non-existent SSID stops the state machine after the first run. Subsequent association requests fail to start the scan engine. Fix this by resetting assoc_scan_tries to zero after completing a scan run. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: remove passive scan on 5 GHz if country IE knows betterLuis R. Rodriguez
If we have new found information about our location and the current country regulatory domain does not have passive scan flag requirements we should be able to actively scan now on those channels. Since AP functionality is not allowed where passive scan flags are set this means if you have a world regulatory domain and you get a country IE that allows that channel (with active scan) then we lift the passive-scan requirement so you can then use AP mode. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: move check for radar freqs into a helperLuis R. Rodriguez
This will be used later. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: replace usage of internal wireless_modes for confLuis R. Rodriguez
No need to use our internal wireless mode variable when cfg80211 already has its own. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Enable MIB and TIM interrupts for station mode.Vivek Natarajan
Enable operating mode specific interrupts in ath9k_add_interface instead of ath9k_start. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath9k: Fix lockdep warningSujith
This patch fixes the lockdep warning shown below, and also initializes the starting sequence number when starting a TX aggregation session. ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc2-wl #21 --------------------------------------------- swapper/0 is trying to acquire lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 but task is already holding lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 other info that might help us debug this: 7 locks held by swapper/0: #0: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #1: (_xmit_ETHER#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #2: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #3: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #4: (rcu_read_lock){..--}, at: [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] #5: (rcu_read_lock){..--}, at: [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] #6: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.29-rc2-wl #21 Call Trace: <IRQ> [<ffffffff8026c329>] __lock_acquire+0x1be9/0x1c40 [<ffffffff80442af1>] dev_queue_xmit+0xe1/0x620 [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff8026c3d5>] lock_acquire+0x55/0x70 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbeb9>] _spin_lock+0x39/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbd2f>] _spin_unlock+0x1f/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0142a63>] ieee80211_start_tx_ba_session+0x303/0x4e0 [mac80211] [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] [<ffffffffa0149dae>] rate_control_get_rate+0xae/0xc0 [mac80211] [<ffffffffa01526b5>] invoke_tx_handlers+0x655/0x1000 [mac80211] [<ffffffff802699fd>] mark_held_locks+0x4d/0x90 [<ffffffff804dbcf5>] _spin_unlock_irqrestore+0x65/0x80 [<ffffffffa0151aaa>] __ieee80211_tx_prepare+0x16a/0x310 [mac80211] [<ffffffffa0151adc>] __ieee80211_tx_prepare+0x19c/0x310 [mac80211] [<ffffffff80439cc2>] pskb_expand_head+0x112/0x190 [<ffffffffa0154986>] ieee80211_master_start_xmit+0x286/0x6c0 [mac80211] [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0154221>] ieee80211_subif_start_xmit+0x4a1/0x980 [mac80211] [<ffffffffa0153f18>] ieee80211_subif_start_xmit+0x198/0x980 [mac80211] [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa028ecfd>] ip6_output+0x62d/0x1230 [ipv6] [<ffffffff8024ca00>] __mod_timer+0xb0/0xd0 [<ffffffffa02ad25a>] mld_sendpack+0x3fa/0x4a0 [ipv6] [<ffffffffa02ace60>] mld_sendpack+0x0/0x4a0 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffffa02ae219>] mld_ifc_timer_expire+0x289/0x340 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffff8024c097>] run_timer_softirq+0x147/0x220 [<ffffffff802473fb>] __do_softirq+0x9b/0x180 [<ffffffff80265516>] tick_dev_program_event+0x36/0xb0 [<ffffffff8020d77c>] call_softirq+0x1c/0x30 [<ffffffff8020f2c5>] do_softirq+0x65/0xb0 [<ffffffff80246ebd>] irq_exit+0x9d/0xc0 [<ffffffff80221db6>] smp_apic_timer_interrupt+0x86/0xd0 [<ffffffff8020d1b3>] apic_timer_interrupt+0x13/0x20 Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09rt2x00: Validate firmware in driverIvo van Doorn
The get_firmware_crc() callback function isn't flexible enough when dealing with multiple firmware versions. It might in some cases be possible that the firmware file contains multiple CRC checksums. Create the check_firmware() callback function where the driver has complete freedom in how to validate the firmware. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09rt2x00: Add kill_tx_queue callback functionIvo van Doorn
provide rt2x00lib the possibility to kill a particular TX queue. This can be useful when disabling the radio, but more importantly will allow beaconing to be disabled when mac80211 requests this (during scanning for example) Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09rt2x00: Move intf_work to mac82011 workqueueIvo van Doorn
ieee80211_iterate_active_interfaces() no longer acquires the RTNL lock which means the intf_work handler can be safely used from the mac80211 workqueue again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: unify iwlagn and 3945 power save managementWinkler, Tomas
This patch unifies 3945 and iwlagn power save management This patch also better separates system state from user setting. System state shall be removed later as this shall be shifted to user space Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: don't use implicit priv in IWL_DEBUGTomas Winkler
Call IWL_DEBUG macro with explicit priv argument. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: check return value of pci_enable_deviceWinkler, Tomas
pci_enable_device is tagged with __must_check therefore don't ignore the return value in pci_resume handlers Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: iwl3945_send_tx_power must be staticWinkler, Tomas
iwl3945_send_tx_power must be static Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwlwifi: suppress unused variable warning when compiling w/o IWLWIFI_DEBUGWinkler, Tomas
This patch adds __maybe_unused attribute to priv variables used in functions that used it solely for debug printouts Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09iwl3945: Getting rid of the *39_rxon iwl_priv fieldsSamuel Ortiz
The iwl_rxon_cmd is really just a iwl3945_rxon_cmd structure extension. So, we can use the *_rxon fields from iwl_priv instead of the 3945 specific ones (*39_rxon). We have to then be careful when submitting REPLY_RXON host commands, since the command length as to be set according to the HW. As another precaution the reserved4 and reserved5 fields are cleared before being sent to the 3945. With the *39_rxon removal, a lot of duplicated code can be removed from the 3945 code base. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09orinoco: checkpatch cleanupAndrey Borzenkov
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-08gro: Optimise TCP packet receptionHerbert Xu
gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08gro: Optimise IPv4 packet receptionHerbert Xu
As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08gro: Optimise Ethernet header comparisonHerbert Xu
This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08gro: Remember number of held packets instead of counting every timeHerbert Xu
This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-08net: Increase default NET_SKB_PAD to 32.David S. Miller
Several devices need to insert some "pre headers" in front of the main packet data when they transmit a packet. Currently we allocate only 16 bytes of pad room and this ends up not being enough for some types of hardware (NIU, usb-net, s390 qeth, etc.) So increase this to 32. Note that drivers still need to check in their transmit routine whether enough headroom exists, and if not use skb_realloc_headroom(). Tunneling, IPSEC, and other encapsulation methods can cause the padding area to be used up. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-02-07igb: remove dead code in transmit routineJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: update version number and copyright datesAlexander Duyck
Update the version number to 1.3.16 and update copyright dates for 2009. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: fix two minor items found during code reviewAlexander Duyck
This patch addresses two minor items I found while cleaning up the igb driver for our sourceforge version. The first clears the context index if we don't flag that we need it. The second item is that eims_other should be used instead of bit defines when setting all of the EICS bits prior to reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: update stats before doing reset in igb_downAlexander Duyck
It was seen with repeated interface up/down testing that there was a large stray between the stats reported by the queues and the stats reported by the HW. It was found to be an issue in that hw stats were being reset without first being recorded. This change records the stats before wiping them from the system via the reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: remove redundant count set and err_hw_initAlexander Duyck
Remove the setting of ring->count variables from igb_probe as they are duplicating the same configuration that is done igb_alloc_queues. Remove the err_hw_init tag as it can be replaced by err_sw_init. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: remove disable_av variable from mac_info structAlexander Duyck
The disable_av variable is never used by the driver and provides no value as it is likely a leftover debugging variable. I have removed it and replaced the one spot that checked for it with a check for a valid address. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: change pba size determination from if to switch statementAlexander Duyck
As additional hardware is added to the igb driver it is easier to support the expansion via switch statements instead of using nested ifs. For this reason I am changing this to a switch statement. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: move get_hw_control within igb_resume.Alexander Duyck
Move igb_get_hw_control up so that it is called just after the reset in igb_resume. This notifies the HW sooner that the driver is reassuming control of the device. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: don't read eicr when responding to legacy interruptsAlexander Duyck
The interrupt handler was reading eicr and then doing nothing with the result. I have removed the variable and the register read since they provide no value to the legacy interrupt handler. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: remove unnecessary adapter->hw calls when just hw-> will do.Alexander Duyck
There were several spots in the code making calls to adapter->hw when they could have just been accessing hw-> directly. I cleaned up the spots where this was visibly apparent. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: rename igb_update_mc_addr_list_82575 to not include the 82575Alexander Duyck
There isn't much point in having the _82575 hanging off the end of this function since there aren't any other version of this function running around within this driver. This also allows for a bit of whitespace cleanup due to a shorter function name. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: remove redundant timer updates and cleanup watchdog_taskAlexander Duyck
The igb watchdog task is modifying the watchdog timer twice duing a single run. It only needs to be called once to reschedule itself for 2 seconds from the last time it ran. In addition I removed the allocation of the mac_info structure since it is only called twice and is easier to access via the e1000_hw struct. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: cleanup igb_netpoll to be more friendly with napi & GROAlexander Duyck
This patch cleans up igb_netpoll so that it is more friendly with both the current napi and newly introduced GRO features. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: add counter for dma out of sync errorsAlexander Duyck
Add a counter for dma out of sync errors reported via interrupt. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: update testing done by ethtoolAlexander Duyck
Most of the code for the testing has pretty much become stale at this point and is need of update. This update just streamlines most of the code, widens the range of interrupt testing. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-07igb: update feature flags supported in ethtoolAlexander Duyck
This driver is currently using HW_CSUM which is not correct. Update this to use the IP_CSUM and IPV6_CSUM flags. In addition consolidate the TSO flag setting. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-07 14:50:30 +0000