summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-09-26staging: mei: Organize the initialization state machine.Oren Weil
moving the final state, clearing of the client maps and updating of mei state out from mei_host_client_properties function. Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26Staging: rtl8192e: off by one in rtl8192_get_channel_map()Dan Carpenter
COUNTRY_CODE_MAX is not a valid country code. We're off by one here. This gets passed to Dot11d_Channelmap() where it's used as an offset into the ChannelPlan[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: simplified internal ioctl function once moreRoland Vossen
Code cleanup. Merged two functions. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: consistent naming of struct net_device *ndevRoland Vossen
Code cleanup. Various names (ndev, net, dev) were used for the same structure. Settled for 'ndev'. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: clarified fullmac io and event codesRoland Vossen
Added comments to make code more readable. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed log after kzalloc()/kmalloc() failureRoland Vossen
kzalloc/kmalloc already reports an allocation failure themselves. Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed likely/unlikely callsRoland Vossen
There was no performance rationale to use these guys. Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: added endianness check flag to fullmac MakefileRoland Vossen
Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: removed two fullmac sparse spinlock warningsRoland Vossen
By deleting three redundant functions. The spinlock was related to event queue operation. Event queue data members were also renamed to make their function more clear. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove global variables for data frame boundaryFranky Lin
Put boundary settings in brcmf_bus structure Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_idletimeFranky Lin
Use constant for idle time setting. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param for watchdogFranky Lin
Use constant to replace global variable used for watchdog polling Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_sdiod_drive_strengthFranky Lin
Replaced the global variable with constant Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove fullmac module_param brcmf_dongle_memsizeFranky Lin
remove unused module parameter brcmf_dongle_memsize and related code Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove event handler thread from fullmacFranky Lin
Use work queue to defer cfg80211 event handle jobs Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: remove unconditional code blocks from brcmfmacArend van Spriel
Using a block statement to scope function variables is not common in linux kernel development. Browsed through the brcmfmac to remove those. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: more fullmac sparse endianness scan related changesRoland Vossen
Annotated endianness on structures send/received to/from dongle. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings for struct sdpcm_sharedRoland Vossen
Structure that is received from dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings for struct brcmf_proto_cdc_ioctlRoland Vossen
Structure that is send/received to/from dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: various fulmac sparse endianness fixesRoland Vossen
Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: brcm80211: sparse endianness warnings on dongle eventsRoland Vossen
Structures received from dongle have been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: vmbus: Get rid of hv_cb_utils[] and other unneeded codeK. Y. Srinivasan
Now that the transformation of the util driver is complete, get rid of hv_cb_utils[] and other unneeded code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: util: Properly handle util services in the util driverK. Y. Srinivasan
Now, properly handle util services in the util driver and eliminate code that will not be necessary. In the current code, util services were all handled not as other vmbus devices (net, block) but rather through special handling (channel setup etc.). In this patch we handle all services using the standard Linux Driver Model. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20Staging: hv: util: Perform some service specific init/deinit in probe/removeK. Y. Srinivasan
In preparation for modifying the util driver to fully conform to the Linux Driver Model, perform some service specific init and de-init operations in util_probe()/util_remove() as opposed to in init_hyperv_utils()/exit_hyperv_utils() as is currently done. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20staging: wlags49_h2: Support standard WEXT eventsDavid Kilroy
... instead of using IWEVCUSTOM. Use the defined events for michael mic failure, association request info and association response info. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-20staging: wlags49_h2: Remove old WIRELESS_EXT supportDavid Kilroy
Since the driver is now in-kernel remove support for building against ancient WIRELESS_EXT versions. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-19staging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAITKautuk Consul
If the usermode app does an ioctl over this serial device by using TIOCMIWAIT, then the code will wait by setting the current task state to TASK_INTERRUPTIBLE and then calling schedule(). This will be woken up by the qt2_process_modem_status on URB completion when the port_extra->shadowMSR is set to the new modem status. However, this could result in a lost wakeup scenario due to a race in the logic in the qt2_ioctl(TIOCMIWAIT) loop and the URB completion for new modem status in qt2_process_modem_status. Due to this, the usermode app's task will continue to sleep despite a change in the modem status. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-19Staging: bcm: Add size maximum size restrictions for IOCTL_IDLE_REQKevin McKinney
In the first alteration, the MAX_CNTL_PKT_SIZE is the maximum size of the control packet in ->Adapter->txctlpacket[] which is defined in InitAdapter(). This caps the size of kmalloc memory allocation. In the second change, this max cap fixes a potential memory corruption bug when subsequent memset and memcpy calls are invoked. Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-19Staging: bcm: Add size minimum size restrictions for IOCTL_IDLE_REQKevin McKinney
If IoBuffer.InputLength is zero then this will cause an Oops when we dereference the ZERO_SIZE_PTR. Or if it's smaller than sizeof(struct link_request) then we would get memory corruption when we set ->PLength in CopyBufferToControlPacket(). Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-19staging: usbip: fix up api changes that broke windows clientsAlexander Thomas
Revert changes in definitions that were submitted on May 11 2011 and committed on June 7 2011. No reason for the change in these values was given in the patch comment, it broke compatibility with older versions, and was difficult to detect by the simultaneous move of the lines of code. Signed-off-by: Alexander Thomas <alexander.thomas@esaturnus.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: sparse endianness warnings on fullmac bss infoRoland Vossen
Structure that is received from dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove static global variables from dhd_sdio.cArend van Spriel
Several global variables that were set but never initialized have been removed. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove global variable from bcmsdh_sdmmc.cArend van Spriel
The source file contained some static global variables that were needed per device handled by the driver. They have moved to the struct brcmf_sdio_dev for that reason. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove for_each_bss() macro from brcmfmac driverArend van Spriel
The macro was only used once in the code and has been removed for clarity reading the code. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove brcmfmac interface name overrideArend van Spriel
The brcmfmac had a module parameter which could be used to override the name of the wireless net device name and it defaults to 'wlan'. This is considered rather useless, because what is in a name. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove fullmac module_param for ARP offload featureFranky Lin
Use macro to replace global variable for ARP offload configuration Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove _brcmf_sysioc_thread in fullmacFranky Lin
_brcmf_sysioc_thread is handling deferred jobs from 4 callers. Use work queue to handle set_mac_address/set_multicast_list requests. brcmf_add_if/brcmf_del_if never run in atomic context and can call brcmf_op_if directly. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: fixed sparse endianness warnings on fullmac ratespecRoland Vossen
Structure that is sent to the dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: fixed sparse endianness warnings on fullmac scb parsRoland Vossen
Structure that is sent to the dongle has been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: fixed sparse endianness warnings on fullmac assoc parsRoland Vossen
Structures that are sent to the dongle have been annotated. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: fixed sparse endianness warnings on fullmac scan parsRoland Vossen
Three structures that are sent to the dongle have been annotated for correct endianness: struct brcmf_iscan_params, brcmf_scan_params, brcmf_cfg80211_scan_req. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: removed set_fs/get_fs/get_ds calls from brcmf_dev_ioctl()Roland Vossen
brcmf_dev_ioctl() does not provide a user space buffer to brcmf_netdev_ioctl_priv. Hence these calls are not necessary. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: simplified brcmf_proto_ioctl()Roland Vossen
Removed a function parameter since it was redundant. Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove global variable brcmf_radio_up from fullmacFranky Lin
Remove unnecessary global variable Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove global variable brcmf_roam from fullmacFranky Lin
Remove unnecessary global variable Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove fullmac module_param for packet filter featureFranky Lin
Use constant values for packet filter configuration Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove fullmac module_param brcmf_deferred_txFranky Lin
Remove brcmf_deferred_tx as it should be always 1 Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove fullmac module_param sd_f2_blocksizeFranky Lin
Replaced the global variable with macro. Reported-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging: brcm80211: remove SOFTAP code from fullmacFranky Lin
Dead code removal. Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16drivers/staging/mei/interface.c: take size of pointed value, not pointerJulia Lawall
Sizeof a pointer-typed expression returns the size of the pointer, not that of the pointed data. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *e; type T; identifier f; @@ f(...,(T)e,..., -sizeof(e) +sizeof(*e) ,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-09 20:42:38 +0000