Age | Commit message (Collapse) | Author |
|
Enables CONFIG_IP_MULTICAST in u8500_defconfig
ST-Ericsson Linux next: Not tested
ST-Ericsson ID: 355020, 353690
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id652d38efceef6585fbb2505750edbacbc9e82a9
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32958
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
ST-Ericsson ID: 364916
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: -
Change-Id: I86d796e347ce7e8c2f3a9ddf256863ba74449ee8
Signed-off-by: pender01 <peter.enderborg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32841
Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
|
|
samples obtained from the fuel gauge is used to calculate the average current.
Calculation of average current include division by samples, which ends up with
division by zero in case samples is zero. Hence if samples is zero, average
current is not calaulated and previous value is used.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 363829
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I04dd205a7af07cfc7d2ff369fd29cdd1363f6208
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32674
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
This add the platform related changes to
support the keypad for sony displays
ST-Ericsson ID: 362724
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ibb0ead5a76dff423e00b1c3d169a9d20d140d1c3
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32506
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Removes dsi clock, dsi lp clock and VANA regulator if MCDE_DISPLAY_DSI
is not set.
Adds return value for enable_dsi_pll.
ST-Ericsson ID: 343541
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I64ede6273b39b05b2a048c62e8752fe615461364
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
[venkata.biswanath@stericsson.com: only moved prcmu changes to
new file. The rest are already applied]
Signed-off-by: Venkata Biswanath <venkata.biswanath@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31801
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32860
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Connect and boot can cause a NULL pointer access if link status interrupt
comes before we enable the MUSB platform initialization happens.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 365151
ST-Ericsson FOSS-OUT ID: NA
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Change-Id: I91aaa269913a7fdf5b4f59927dd563cf8c456e4f
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32825
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This adds the proper device name and the missing
platform data for bu touchscreen
ST-Ericsson ID: 365317
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8cdf7f2748a623251e2d781cea4b1f2ea9e9a35b
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32885
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
ST-Ericsson ID: 345488
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id7e403916437505fed4c0cd9512923a9aa1d81ec
Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32683
Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
fix compilation errors when HDMI_FB_AUTO_CREATE
is not set for db5500
ST-Ericsson ID: 365167
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I3d1b79b350c2672671a4d71b11a3103ec603d6de
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32193
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7e51e5c158e41b20cc7a9da211382cef7b8bf307
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32798
Reviewed-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
|
|
Set pull down for GPIO 193, 194 and 195
ST-Ericsson ID: 332619
ST-Ericsson FOSS OUT ID: NA
Change-Id: Ifb2eb62250616ae572158f23fb3be90f15b47e24
Signed-off-by: Cedric Madianga <cedric.madianga-nonst@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32154
Reviewed-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com>
Tested-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com>
|
|
This patch sets the driver configuration on cg2900.
The MSP1 line is used to receive FM.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 335714
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic8f2e00b1ed57716007ef65b5b9eb4663c4f5e3b
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32392
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch tristates the Interfaces in probe.
The Interface is enable back in prepare function.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 335714
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ia04453f0e3aca1991e135785e9b2772522219347
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32802
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch corrects the bit clock of msp.
The MSP1 line is used to receive FM.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 335714
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Id7ce4b7cafb12fee67c3ac13228d255714e7d234
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32801
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch sets configuration of cg2900.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 335714
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie114065582f53b3af429660768d17456edfa70d6
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32800
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Driver now use a delayed work to poll the autoscan registers after a
key press interrupt. Polling is performed until all keys are released.
Solution was chosen since the hardware does not clear the KPRISA
interrupt bit while a key is pressed, making detection of a second key
action impossible.
ST-Ericsson ID: 361135
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id:Ic258f380ed5a9df78bce68362d4d2ca3e18a9cf1
Signed-off-by: Karl-Johan Perntz <karl-johan.perntz@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32458
Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
ST-Ericsson Linux next: NA
ST-Ericsson ID: 343481
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic59f08e1bb5d858344d95b5d34ae8a5d85d9aa1d
Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32518
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
When there is no crash kernel image loaded, perform a SW reset at a
panic.
ST-Ericsson ID: 340331
Change-Id: I61e0026c248f4a4f1078a988b0dcd395140e5510
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32679
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
PRCMU driver interface for thermal management
of DB5500. MBOX4 supports to
- configure hotmon period
- configure hotdog ranges
- read current temperature
ST-Ericsson Linux next: -
ST-Ericsson ID: 334775
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If25acd1d500800053bd6c511a64c9e5726c69647
Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28334
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32788
Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Actually call the drivers registered runtime_suspend/resume callbacks
upon pm_runtime_get/put.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2c4efe1f2e01ec05bb790883c7634a715649a4a3
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32596
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
This driver has been disabled because of some updates required
on user side. Now that the user lib are fixed, enable it again.
ST-Ericsson ID: 363600
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: -
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Depends-On: I38a2d1ffff4def425d50564de689fb949fe5d6e7, Ib303ad17367e11921471b4124563239d6c26223a, Iad3a2e06c252e4c9dcb323ae3d6a5d51bac579ef
Change-Id: I458d4565a5d1dedf84fbbc0c614daf80a9810693
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32438
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
|
|
Added fix for crash in ecm_set_alt(). This patch is
based on the changes done for RNDIS in the patch
commit id 789ef237b38a79f988738ff18ae6d756551afb92
ACM in the patch
commit id 0ab69f47e172739fd499f09469fde6eb16e9287d
ST-Ericsson ID:AP 365052
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I673d5bc1632bcd4b382c96373501e797a4dc6287
Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32673
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch adds support for AB5500 v2.0 HVLED hardware blink feature
in existing driver.
ST-Ericsson Linux next: ER 336280
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson ID: ER 364964
Change-Id:I73e1caeac14774b7d3e03d1e7c5e4bd16fc7d06a
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27547
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32746
Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
|
|
When using kexec/kdump without an crash kernel image loaded:
* clean the caches and write the crash_notes
* perform a restart
ST-Ericsson ID: 340331
Change-Id: I1ae34ed2b5e43da4849650a8a7d2f1e453dcbe93
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32678
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
USB context is stored and restored at each time when the usb cable
is pluged in.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 363987
ST-Ericsson FOSS-OUT ID: NA
Change-Id: I5fa7b32dd4f67dcc81f2418e872ed5107f8624c0
Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32785
Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This fixes the clock which was configured automatically
to 13Mhz instead of being decided at run time
ST-Ericsson Linux next: NA
ST-Ericsson ID: 363003
ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10006
Change-Id: If885d5b39c8e95d02a367a16f346aade6208f252
Signed-off-by: Angshuman Dasgupta <angshuman.dasgupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32393
Reviewed-by: Roger NILSSON1 <roger.xr.nilsson@stericsson.com>
|
|
Due to problem with suspend and resume for mmc/sd, directly
related to the DMA support in the MMCI driver, we temporarily
disable DMA.
Change-Id: I92d1090b7190503f4a136be2361495f11215a3ab
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32763
|
|
Use pm_runtime to get and put our GPIO pins. Especially
needed for making suspend/resume functionality working.
Change-Id: Ie62c08f7e274d07d6be83075c1cbf6a58d4beab4
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32762
Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
|
|
ST-Ericsson ID: 361450
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I75dc4afafc493412a128071b10da3a8b773b3bf5
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32727
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This patch fixes the corner case issue in driver,
due to which if the port is closed while data is
being read, the driver state is not correct next
time the port is re-opened.
ST-Ericsson Linux next: Not tested, ER356425
ST-Ericsson ID: 356425
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I82090c25ce7dd3aea07bacd96856d62361bcd741
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32208
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
Add support for HCI Raw channel so that CG2900
can be accessed directly from user space.
ST-Ericsson Linux next: Not tested, ER351170
ST-Ericsson ID: 351170
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If8a2455be32f0eb99f7c0bc7a5cf0e09270fa6af
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32206
Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
This patch fixes the issue of improper results while performing block
scan on non EU bands.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 363911
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I15d3ab6816e8f291f5b2ac87acd5a54f66d348ca
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32408
Tested-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
Reviewed-by: Anupam ROY <anupam.roy@stericsson.com>
Reviewed-by: Anurag SRIVASTAVA <anurag.srivastava@stericsson.com>
Reviewed-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
|
|
Avoid powerdown when fw failed.
ST-Ericsson ID: 364550
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I0386a2e8f3ce8d84ca30e7cd3c81df19a43a47ab
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32559
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
The calculation of a max counter is corrected.
ST-Ericsson ID: 364552
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4505ede69b1f1b36e27307db02f9ab2778c97341
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32463
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
New chip cut version 3.0 is detected.
ST-Ericsson ID: 364509
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ieee8066728ff57d244c349bc470d743196c372a7
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32432
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Add debugfs support for enabling frame rate logging to dmesg and
getting latest fps metric.
ST-Ericsson ID: 364378
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8d6f1447fb386b7b4d96750652602a5b9b1e8b0c
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32397
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Fix NMF-CM Makefile to allow a proper run of
'make mrproper' in all cases.
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: -
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Change-Id: I3e03b6ba02b5f8f333b1d494e8ce6076f3da56ff
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32554
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
ST-Ericsson ID: 361450
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I809d2d8e76532f6930f27764b76748110c7a492c
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32582
|
|
ST-Ericsson ID: 361450
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie906e98524e8df5dccbe58580f30cc6965ca6244
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32717
|
|
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I26ba2f655d4fb65708913cdeda632e2ca35fea0a
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32671
Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
|
|
ST-Ericsson ID: 348762
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I26770ee6151f91c70eebba1c1c460e7cdedd43e1
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30502
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com>
Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com>
Reviewed-by: QATEST
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32601
Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
|
|
ST-Ericsson ID: 348762
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I7ff9a02de960f251cbbd9f051a1c8050aa340d6d
Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28000
Reviewed-by: QATOOLS
Reviewed-by: QABUILD
Reviewed-by: QATEST
Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32555
Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
|
|
The TVout hardware block is not used, so
remove the related code.
ST-Ericsson ID: 355539
ST-Ericsson Linux next: 344984
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I0f0f39b13f5b48de6096d076b9dd5253a3c14346
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32003
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Implement clean shutdown of mailbox, which includes, unmapping the io mapped
memory, free the requested interrupt, reset all state machine and remove from
list. A function has been added to reset the mailbox which will be used in
case of MSR.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 341807
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I1435345d155717a5276a7a5d74da84d3eeef7f61
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32680
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Remove some useless files from the NMF-CM driver.
ST-Ericsson ID: 360466
ST-Ericsson Linux next: -
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Change-Id: I05eae0cf823b44b0861bff6aedc5341d5cc1d8d0
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32588
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
|
|
Add caller information in case of INTERFACE_NOT_BINDED panic
ST-Ericsson ID: 361780
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Change-Id: I7caf788a30268cd977c67efe62f8182a76502d4c
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32586
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
|
|
When releasing a component, its loadmap entry is not released
if a corruption is detected.
Free this entry in any case to avoid any leakage even in case
corruption.
ST-Ericsson ID: 361414
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Change-Id: Ifbf60e88b4875fffeff50a896a862f850e06227f
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32585
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
|
|
* Generate a DSP Panic and send it to user process when the
DSP does not respond anymore.
The issue is that when a process is using a DSP (ie has some
components deployed on a DSP) without any activity (no interaction
with the DSP), the driver needs to tell it when the DSP is dead.
This Panic message is there to solve this issue.
* Force wake-up of MMDSP before changing hardware power state
This a work around for prcmu issue.
ST-Ericsson ID: 359048
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com>
Change-Id: I920cc6a8e79e7dc9b39bd77f700a9e0e056b6a81
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32584
Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
|
|
mmio uses gpio pin (BASE + 5) located on gpio
expander chip for XENON_CHARGE.
For setting this pin to high safely
gpio_set_value_cansleep()
must be used instead of gpio_set_value().
ST-Ericsson Linux next: NA
ST-Ericsson ID: 361940
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I02e06faa3d9c1862a649f6eb84336734490a7b2b
Signed-off-by: Rajat Verma <rajat.verma@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32531
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
cpu_is_u5500() is what is really meant here, since machine_is_u5500() will
return false on U5500-based boards which use a different mach type.
Change-Id: I50c4512d7a070ee8203a307a9b87da492763aff6
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32524
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|