summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-04u8500: Enable IP multicastu8500-android-2.3_v4.8Bartosz Markowski
Enables CONFIG_IP_MULTICAST in u8500_defconfig ST-Ericsson Linux next: Not tested ST-Ericsson ID: 355020, 353690 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id652d38efceef6585fbb2505750edbacbc9e82a9 Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32958 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-04Build correction after moved header file.pender01
ST-Ericsson ID: 364916 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: - Change-Id: I86d796e347ce7e8c2f3a9ddf256863ba74449ee8 Signed-off-by: pender01 <peter.enderborg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32841 Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
2011-10-04power: ab5500-bm: handle divide by zero warningArun Murthy
samples obtained from the fuel gauge is used to calculate the average current. Calculation of average current include division by samples, which ends up with division by zero in case samples is zero. Hence if samples is zero, average current is not calaulated and previous value is used. ST-Ericsson Linux next: NA ST-Ericsson ID: 363829 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I04dd205a7af07cfc7d2ff369fd29cdd1363f6208 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32674 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-04mach-ux500: keypad support for sony displayAvinash A
This add the platform related changes to support the keypad for sony displays ST-Ericsson ID: 362724 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ibb0ead5a76dff423e00b1c3d169a9d20d140d1c3 Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32506 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-04arm: ux500: Configure dsi clocks and regulatorsJimmy Rubin
Removes dsi clock, dsi lp clock and VANA regulator if MCDE_DISPLAY_DSI is not set. Adds return value for enable_dsi_pll. ST-Ericsson ID: 343541 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I64ede6273b39b05b2a048c62e8752fe615461364 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> [venkata.biswanath@stericsson.com: only moved prcmu changes to new file. The rest are already applied] Signed-off-by: Venkata Biswanath <venkata.biswanath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31801 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32860 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-04ux500:USB: Handling the null pointer situationSakethram Bommisetti
Connect and boot can cause a NULL pointer access if link status interrupt comes before we enable the MUSB platform initialization happens. ST-Ericsson Linux next: NA ST-Ericsson ID: 365151 ST-Ericsson FOSS-OUT ID: NA Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Change-Id: I91aaa269913a7fdf5b4f59927dd563cf8c456e4f Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32825 Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-04mach-ux500: add the proper device name of bu touchscreenAvinash A
This adds the proper device name and the missing platform data for bu touchscreen ST-Ericsson ID: 365317 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I8cdf7f2748a623251e2d781cea4b1f2ea9e9a35b Signed-off-by: Avinash A <Avinash.a@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32885 Reviewed-by: Avinash A <avinash.a@stericsson.com> Tested-by: Avinash A <avinash.a@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-04u5500:Enable low EMI for SDI3(GPIO171-175)Sesahgiri.Holi
ST-Ericsson ID: 345488 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id7e403916437505fed4c0cd9512923a9aa1d81ec Signed-off-by: Sesahgiri.Holi <seshagiri.holi@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32683 Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com> Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-04arm: ux500: fix compilation errorsJayarami Reddy
fix compilation errors when HDMI_FB_AUTO_CREATE is not set for db5500 ST-Ericsson ID: 365167 ST-Ericsson Linux next: Not tested, ER 282779 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I3d1b79b350c2672671a4d71b11a3103ec603d6de Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32193 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-03[ANDROID]: ARM: ux500: allow suspend againJonas Aaberg
ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I7e51e5c158e41b20cc7a9da211382cef7b8bf307 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32798 Reviewed-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com> Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com> Reviewed-by: Yvan FILLION <yvan.fillion@stericsson.com>
2011-10-03Enable pull down for GPIO/MSP2Alexandre Bouin
Set pull down for GPIO 193, 194 and 195 ST-Ericsson ID: 332619 ST-Ericsson FOSS OUT ID: NA Change-Id: Ifb2eb62250616ae572158f23fb3be90f15b47e24 Signed-off-by: Cedric Madianga <cedric.madianga-nonst@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32154 Reviewed-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com> Tested-by: Alexandre BOUIN <alexandre.bouin-nonst@stericsson.com>
2011-10-03ASOC CG29xx: Configures driver cg2900 for FMShyam Krishnan M
This patch sets the driver configuration on cg2900. The MSP1 line is used to receive FM. ST-Ericsson Linux next: NA ST-Ericsson ID: 335714 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic8f2e00b1ed57716007ef65b5b9eb4663c4f5e3b Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32392 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03ASOC CG29xx: Configure Codec to receive FMShyam Krishnan M
This patch tristates the Interfaces in probe. The Interface is enable back in prepare function. ST-Ericsson Linux next: NA ST-Ericsson ID: 335714 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia04453f0e3aca1991e135785e9b2772522219347 Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32802 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03SOC CG29xx: Fix bit-clock to receive FM over I2SShyam Krishnan M
This patch corrects the bit clock of msp. The MSP1 line is used to receive FM. ST-Ericsson Linux next: NA ST-Ericsson ID: 335714 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id7ce4b7cafb12fee67c3ac13228d255714e7d234 Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32801 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03defconfig: enable cg2900Shyam Krishnan M
This patch sets configuration of cg2900. ST-Ericsson Linux next: NA ST-Ericsson ID: 335714 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie114065582f53b3af429660768d17456edfa70d6 Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32800 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03input: Report all key actions in SKE autoscan modeKarl-Johan Perntz
Driver now use a delayed work to poll the autoscan registers after a key press interrupt. Polling is performed until all keys are released. Solution was chosen since the hardware does not clear the KPRISA interrupt bit while a key is pressed, making detection of a second key action impossible. ST-Ericsson ID: 361135 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id:Ic258f380ed5a9df78bce68362d4d2ca3e18a9cf1 Signed-off-by: Karl-Johan Perntz <karl-johan.perntz@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32458 Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com> Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03ARM: U9500: HSI core clocks initializationPawel Szyszuk
ST-Ericsson Linux next: NA ST-Ericsson ID: 343481 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic59f08e1bb5d858344d95b5d34ae8a5d85d9aa1d Signed-off-by: Pawel Szyszuk <pawel.szyszuk@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32518 Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
2011-10-03defconfig: enable SW reset featurePer Fransson
When there is no crash kernel image loaded, perform a SW reset at a panic. ST-Ericsson ID: 340331 Change-Id: I61e0026c248f4a4f1078a988b0dcd395140e5510 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32679 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03U5500: PRCMU MBOX4 support for Hotdog and hotmonVijaya Kumar Kilari
PRCMU driver interface for thermal management of DB5500. MBOX4 supports to - configure hotmon period - configure hotdog ranges - read current temperature ST-Ericsson Linux next: - ST-Ericsson ID: 334775 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: If25acd1d500800053bd6c511a64c9e5726c69647 Signed-off-by: Vijaya Kumar Kilari <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28334 Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32788 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-03ARM: ux500: pm-runtime: Fix callbacksJonas Aaberg
Actually call the drivers registered runtime_suspend/resume callbacks upon pm_runtime_get/put. ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I2c4efe1f2e01ec05bb790883c7634a715649a4a3 Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32596 Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-10-03U8500: enable again the STM trace driverPierre Peiffer
This driver has been disabled because of some updates required on user side. Now that the user lib are fixed, enable it again. ST-Ericsson ID: 363600 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: - Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Depends-On: I38a2d1ffff4def425d50564de689fb949fe5d6e7, Ib303ad17367e11921471b4124563239d6c26223a, Iad3a2e06c252e4c9dcb323ae3d6a5d51bac579ef Change-Id: I458d4565a5d1dedf84fbbc0c614daf80a9810693 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32438 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
2011-10-03android: usb: fix crashes in ecm_set_alt()Thirupathi Chippakurthy
Added fix for crash in ecm_set_alt(). This patch is based on the changes done for RNDIS in the patch commit id 789ef237b38a79f988738ff18ae6d756551afb92 ACM in the patch commit id 0ab69f47e172739fd499f09469fde6eb16e9287d ST-Ericsson ID:AP 365052 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: NA Change-Id: I673d5bc1632bcd4b382c96373501e797a4dc6287 Signed-off-by: Thirupathi <thirupathi.chippakurthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32673 Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-03u5500: leds: add ab5500v2 HVLED blink featureShreshtha Kumar Sahu
This patch adds support for AB5500 v2.0 HVLED hardware blink feature in existing driver. ST-Ericsson Linux next: ER 336280 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson ID: ER 364964 Change-Id:I73e1caeac14774b7d3e03d1e7c5e4bd16fc7d06a Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27547 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32746 Reviewed-by: Naga RADHESH Y <naga.radheshy@stericsson.com> Tested-by: Naga RADHESH Y <naga.radheshy@stericsson.com>
2011-10-03ux500: Start crash dump through SW resetPer Fransson
When using kexec/kdump without an crash kernel image loaded: * clean the caches and write the crash_notes * perform a restart ST-Ericsson ID: 340331 Change-Id: I1ae34ed2b5e43da4849650a8a7d2f1e453dcbe93 Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32678 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-10-02ux500:USB: Fix for CPU Idle from USBSakethram Bommisetti
USB context is stored and restored at each time when the usb cable is pluged in. ST-Ericsson Linux next: NA ST-Ericsson ID: 363987 ST-Ericsson FOSS-OUT ID: NA Change-Id: I5fa7b32dd4f67dcc81f2418e872ed5107f8624c0 Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32785 Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-30sound: asoc: ab5500: Corrected the clock settingAngshuman Dasgupta
This fixes the clock which was configured automatically to 13Mhz instead of being decided at run time ST-Ericsson Linux next: NA ST-Ericsson ID: 363003 ST-Ericsson FOSS-OUT ID: STETL-FOSS-OUT-10006 Change-Id: If885d5b39c8e95d02a367a16f346aade6208f252 Signed-off-by: Angshuman Dasgupta <angshuman.dasgupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32393 Reviewed-by: Roger NILSSON1 <roger.xr.nilsson@stericsson.com>
2011-09-30mach-ux500:u8500: Temporarily disable DMA for mmc and sdUlf Hansson
Due to problem with suspend and resume for mmc/sd, directly related to the DMA support in the MMCI driver, we temporarily disable DMA. Change-Id: I92d1090b7190503f4a136be2361495f11215a3ab Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32763
2011-09-30mmc: mmci: Added initial support for pm_runtimeUlf Hansson
Use pm_runtime to get and put our GPIO pins. Especially needed for making suspend/resume functionality working. Change-Id: Ie62c08f7e274d07d6be83075c1cbf6a58d4beab4 Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32762 Reviewed-by: Sebastian RASMUSSEN <sebastian.rasmussen@stericsson.com>
2011-09-30u5500: cpuidle: enable ApIdleRabin Vincent
ST-Ericsson ID: 361450 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I75dc4afafc493412a128071b10da3a8b773b3bf5 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32727 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-30mfd/cg2900: Error opening HCI Raw ChannelHemant Gupta
This patch fixes the corner case issue in driver, due to which if the port is closed while data is being read, the driver state is not correct next time the port is re-opened. ST-Ericsson Linux next: Not tested, ER356425 ST-Ericsson ID: 356425 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I82090c25ce7dd3aea07bacd96856d62361bcd741 Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32208 Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2011-09-30mfd/cg2900: Support HCI Raw Channel.Hemant Gupta
Add support for HCI Raw channel so that CG2900 can be accessed directly from user space. ST-Ericsson Linux next: Not tested, ER351170 ST-Ericsson ID: 351170 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: If8a2455be32f0eb99f7c0bc7a5cf0e09270fa6af Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32206 Reviewed-by: Henrik POSSUNG <henrik.possung@stericsson.com> Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
2011-09-30CG2900 FM Radio: Block Scan not working for non EU bands.Hemant Gupta
This patch fixes the issue of improper results while performing block scan on non EU bands. ST-Ericsson Linux next: NA ST-Ericsson ID: 363911 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I15d3ab6816e8f291f5b2ac87acd5a54f66d348ca Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32408 Tested-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com> Reviewed-by: Anupam ROY <anupam.roy@stericsson.com> Reviewed-by: Anurag SRIVASTAVA <anurag.srivastava@stericsson.com> Reviewed-by: Johan PALMAEUS <johan.xj.palmaeus@stericsson.com>
2011-09-30video: av8100: Improve error handlingPer Persson
Avoid powerdown when fw failed. ST-Ericsson ID: 364550 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I0386a2e8f3ce8d84ca30e7cd3c81df19a43a47ab Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32559 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-30video: av8100: Fix wrong loop max valuePer Persson
The calculation of a max counter is corrected. ST-Ericsson ID: 364552 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4505ede69b1f1b36e27307db02f9ab2778c97341 Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32463 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2011-09-30video: av8100: Debug new chip versionPer Persson
New chip cut version 3.0 is detected. ST-Ericsson ID: 364509 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ieee8066728ff57d244c349bc470d743196c372a7 Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32432 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2011-09-30video: mcde: Add fps loggingMarcus Lorentzon
Add debugfs support for enabling frame rate logging to dmesg and getting latest fps metric. ST-Ericsson ID: 364378 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I8d6f1447fb386b7b4d96750652602a5b9b1e8b0c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32397 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-30U8500 CM: fix 'make mrproper' issueu8500-android-2.3_v4.6Pierre Peiffer
Fix NMF-CM Makefile to allow a proper run of 'make mrproper' in all cases. ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: - Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Change-Id: I3e03b6ba02b5f8f333b1d494e8ce6076f3da56ff Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32554 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-09-30u5500: enable cpuidle debugRabin Vincent
ST-Ericsson ID: 361450 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I809d2d8e76532f6930f27764b76748110c7a492c Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32582
2011-09-30db5500-prcmu: call debug function to record ARM OPPRabin Vincent
ST-Ericsson ID: 361450 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie906e98524e8df5dccbe58580f30cc6965ca6244 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32717
2011-09-30ARM: u8500: configs: Enable regulator suspend forceJonas Aaberg
ST-Ericsson Linux next: - ST-Ericsson ID: - ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I26ba2f655d4fb65708913cdeda632e2ca35fea0a Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32671 Reviewed-by: Bengt JONSSON <bengt.g.jonsson@stericsson.com>
2011-09-30u5500: prcmu: implement DDR OPP handlingRabin Vincent
ST-Ericsson ID: 348762 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I26770ee6151f91c70eebba1c1c460e7cdedd43e1 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/30502 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-by: Mattias NILSSON <mattias.i.nilsson@stericsson.com> Reviewed-by: QATEST Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32601 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
2011-09-30u5500: prcmu: implement APE OPP handlingShreshtha Kumar Sahu
ST-Ericsson ID: 348762 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I7ff9a02de960f251cbbd9f051a1c8050aa340d6d Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/28000 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32555 Tested-by: Venkata Biswanath DEVARASETTY <venkata.biswanath@stericsson.com>
2011-09-30input:misc: Remove TVout support in accessory driverVirupax Sadashivpetimath
The TVout hardware block is not used, so remove the related code. ST-Ericsson ID: 355539 ST-Ericsson Linux next: 344984 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I0f0f39b13f5b48de6096d076b9dd5253a3c14346 Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32003 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-30ux500-mbox: Proper shutdown of mailboxArun Murthy
Implement clean shutdown of mailbox, which includes, unmapping the io mapped memory, free the requested interrupt, reset all state machine and remove from list. A function has been added to reset the mailbox which will be used in case of MSR. ST-Ericsson Linux next: NA ST-Ericsson ID: 341807 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I1435345d155717a5276a7a5d74da84d3eeef7f61 Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32680 Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2011-09-30U8500 CM: remove useless filesPierre Peiffer
Remove some useless files from the NMF-CM driver. ST-Ericsson ID: 360466 ST-Ericsson Linux next: - Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Change-Id: I05eae0cf823b44b0861bff6aedc5341d5cc1d8d0 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32588 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
2011-09-30U8500 CM: Add caller info in some panicPierre Peiffer
Add caller information in case of INTERFACE_NOT_BINDED panic ST-Ericsson ID: 361780 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Change-Id: I7caf788a30268cd977c67efe62f8182a76502d4c Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32586 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
2011-09-30U8500 CM: always release the loadmap entryPierre Peiffer
When releasing a component, its loadmap entry is not released if a corruption is detected. Free this entry in any case to avoid any leakage even in case corruption. ST-Ericsson ID: 361414 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Change-Id: Ifbf60e88b4875fffeff50a896a862f850e06227f Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32585 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
2011-09-30U8500 CM: send a DSP Panic if it's not respondingPierre Peiffer
* Generate a DSP Panic and send it to user process when the DSP does not respond anymore. The issue is that when a process is using a DSP (ie has some components deployed on a DSP) without any activity (no interaction with the DSP), the driver needs to tell it when the DSP is dead. This Panic message is there to solve this issue. * Force wake-up of MMDSP before changing hardware power state This a work around for prcmu issue. ST-Ericsson ID: 359048 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Pierre Peiffer <pierre.peiffer@stericsson.com> Change-Id: I920cc6a8e79e7dc9b39bd77f700a9e0e056b6a81 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32584 Reviewed-by: Pierre PEIFFER <pierre.peiffer@stericsson.com> Tested-by: Pierre PEIFFER <pierre.peiffer@stericsson.com>
2011-09-30ARM: ux500: mmio: Removes gpio_set_value warningRajat Verma
mmio uses gpio pin (BASE + 5) located on gpio expander chip for XENON_CHARGE. For setting this pin to high safely gpio_set_value_cansleep() must be used instead of gpio_set_value(). ST-Ericsson Linux next: NA ST-Ericsson ID: 361940 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I02e06faa3d9c1862a649f6eb84336734490a7b2b Signed-off-by: Rajat Verma <rajat.verma@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32531 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2011-09-29dbx500-prcmu: use cpu_is() instead of machine_is()u8500-android-2.3_v4.5Rabin Vincent
cpu_is_u5500() is what is really meant here, since machine_is_u5500() will return false on U5500-based boards which use a different mach type. Change-Id: I50c4512d7a070ee8203a307a9b87da492763aff6 Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32524 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 22:31:03 +0000