summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-19wireless: rt2x00: rt2800usb: identify Allwin devicesmaster-2010-04-19Xose Vazquez Perez
Applied common sense, no info from the manufacturer: (0x8516, 0x2070) is RT2070 (0x8516, 0x2770) is RT2770 (0x8516, 0x2870) is RT2870 [...] Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: add missing newlineJohannes Berg
One HT debugging printk is missing a newline, add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: have sparse check endian issuesDavid Kilroy
Orinoco should be endian clean, so enable the checking. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: use cfg80211_find_ieDavid Kilroy
Instead of using a local function. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: implement set_wiphy_paramsDavid Kilroy
... to set fragmentation and RTS thresholds. Also report RTS retry settings during wiphy init. Note that the existing semantics for enabling microwave robustness are preserved on firmwares that have it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: Prevent running sta_cleanup timer unnecessarilyJuuso Oikarinen
The sta_cleanup timer is used to periodically expire buffered frames from the tx buf. The timer is executing periodically, regardless of the need for it. This is wasting resources. Fix this simply by not restarting the sta_cleanup timer if the tx buffer was empty. Restart the timer when there is some more tx-traffic. Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: fix stopping RX BA session from timerJohannes Berg
Kalle reported that his system deadlocks since my recent work in this area. The reason quickly became apparent: we try to cancel_timer_sync() a timer from within itself. Fix that by making the function aware of the context it is called from. Reported-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: fix typo in commentsDaniel Halperin
The flag is called IEEE80211_TX_STAT_AMPDU rather than using the whole word STATUS. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-04-16iwlwifi: make scan antenna forcing more genericJohannes Berg
Some future hardware will also require some antenna overrides so make the current logic more generic; right now it is semantically based on a workaround for off-channel reception but the reasons for the new antenna overrides will be different. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove monitor checkJohannes Berg
Off-channel reception is acceptable in monitor mode, and checking for monitor mode this way is not really correct anyway since it could be the case while operating. Now iwl_is_monitor_mode() is no longer used so remove it completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: don't check monitor for scanningJohannes Berg
Monitor mode operation need not (and probably should not) affect scanning this way since real monitoring can not properly happen while scanning anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: rename TX_CMD_FLG_BT_DIS_MSKJohannes Berg
The flag name is a little misleading, this flag instructs the device to ignore bluetooth messages for purposes of frame transmissions, so rename the flag to TX_CMD_FLG_IGNORE_BT. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: make BT coex config a virtual methodJohannes Berg
Some future hardware will require a different command to be sent for bluetooth coexist, so make this a virtual method that can be changed on a per-device basis. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: more code clean up for agn devicesWey-Yi Guy
Since multiple new devices having similar uCode architecture and use same registers address, remove more reference to 5000 series to eliminate the confusion. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: sanity check for turn on aggregation tidWey-Yi Guy
Perform sanity check for turn on aggregation tid. Also remove the option for turn on all the aggregation tids at once since it is deprecated function and not being used. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: PA type for 6000g2 seriesWey-Yi Guy
For 6000g2 series of NICs, PA type is determined by uCode, driver do not have to set the register for internal/external PA. It is a workaround just for 6000 series NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: add hw revision for 6000g2 NICWey-Yi Guy
Add hardware revision for 6000g2 series of NIC Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove redundant iwl_dump_lq_cmd()Shanyu Zhao
This function is called twice in a row, remove the second one. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: add debugfs ops to iwlwifiAbhijeet Kolekar
Seperate debugfs functions into iwlagn specific debugfs file and Add debugfs ops to iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove duplicated debug functionsWey-Yi Guy
Use the show uCode statistics function for uCode debugging purposes only; it is being duplicated in both debugfs and sysfs. remove the one from sysfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: bring up 6000 Series 2x2 AGN Gen2 adaptersShanyu Zhao
This patch is to bring up 6000 Series 2x2 AGN Gen2 adapters. Seperate various version numbers from 6000 Series definitions; Add module firmware declaration for the new adapters; Add additional device IDs and subsystem IDs; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: more generic eeprom definesWey-Yi Guy
Some definition for eeprom apply to more than 5000 series device, change the name to reflect it for easy reading. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: trigger scan synchronouslyJohannes Berg
Scan requesting doesn't need to be asynchronous since all code paths leading up to it can sleep. Make the scan request a new util operation that is hw-specific (to account for 3945 vs. agn) and call it right in place. This patch moves a lot of code into iwlagn as it need not be in iwlcore. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: rename priv->scan to priv->scan_cmdJohannes Berg
I keep checking what "priv->scan" is, so rename it to "priv->scan_cmd" which more clearly tells us what it is. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove scan_pass_startJohannes Berg
Since we no longer do a multi-pass scan, keeping track of how long each pass took is pointless since there will only be one. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove next_scan_jiffiesJohannes Berg
This logic is just confusing, if anything it belongs into mac80211. Also, even if we do scan during the EAPOL handshake, that will not cause any problems, just a short delay. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: correct atomic bitops usageJohannes Berg
With atomic bitops, test_and_{set,clear}_bit should be used instead of separate test_bit and set_bit/clear_bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove scan_bands logicJohannes Berg
Since mac80211 will now never request scanning multiple bands, we can remove all the associated logic and scan a single band only in each scan. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: set correct single/dual stream maskWey-Yi Guy
Even the initial single/dual stream values will be overridden later when issue link quality command; but still make sense not to use hard-code value during initialization. Single/Dual stream mask are used to indicate the best antenna for SISO/MIMO; different NIC has different tx antenna configuration; so the parameter need to based on the valid tx antenna. 1x2 device: single tx antenna available, only SISO is valid configuration, but still need to set up MIMO configuration, so set it up with antenna A & B as default. 2x2 device: two tx antenna available, dual_stream will use both valid antenna. 3x3 device: three tx antenna available, skip the first antenna and choice the second and third antenna for dual_stream. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16Merge branch 'wireless-2.6' into wireless-next-2.6Reinette Chatre
Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c
2010-04-16iwlwifi: correct 6000 EEPROM regulatory addressShanyu Zhao
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: fix scan racesJohannes Berg
When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: initialize iwl_wimax_coex_cmd.flagsmaster-2010-04-16Stanislaw Gruszka
iwl_wimax_coex_cmd.flags can be really uninitialized, so fix that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16iwlwifi: check scan request ie_lenStanislaw Gruszka
In mac80211 we always check both scan_req->ie and scan_req->ie_len against zero before usage, in iwlwifi we should do the same. Remove not needed "left -= ie_len" while at it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16wl1251: add support for dedicated IRQ lineGrazvydas Ignotas
wl1251 has WLAN_IRQ pin for generating interrupts to host processor, which is mandatory in SPI mode and optional in SDIO mode (which can use SDIO interrupts instead). However TI recommends using deditated IRQ line for SDIO too. Add support for using dedicated interrupt line with SDIO, but also leave ability to switch to SDIO interrupts in case it's needed. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Fix sparse endian warningsSujith
This patch fixes a bunch of endian issues that were exposed by sparse. It's a miracle that the driver worked at all till now. The Lord be praised. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Handle WMI timeouts properlySujith
If a WMI command has timed out for some reason, a late WMI response would end up updating the response region of a new WMI request that has been issued in the meantime. Fix this race condition by dropping a WMI response if a new WMI command has been issued. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Add dropped SKB count to debugfsSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Remove GPIO set on unloadSujith
There is no point in trying to set the LED pin when the module is being unloaded. The target would be reset anyway. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Use buffered register writesSujith
This patch adds macros at certain places which could be optimized for multiple register writes. The performance of ath9k_htc improves considerably, especially reducing the latency involved in a scan run. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Relocate Opmode initializationSujith
Programming the opmode in the HW can be done before the assoc_id and STA_ID registers are setup. This helps ath9k_htc when multiple register writes are used. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: Add macros for multiple register writesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Implement multiple register write supportSujith
This patch adds support for writing multiple registers in a single USB command. Specific calls from the HW code that performs multiple register writes would be modified to make use of this in subsequent patches. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath: Add buffered register write operationsSujith
This is required to implement delayed/buffered register writes in ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_htc: Cleanup beacon configurationSujith
This patch cleans up beacon configuration, removing a redundant interface type check and updating beacon interval in the correct place. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16iwmc3200wifi: check sparse endianness annotationsSamuel Ortiz
Add -D__CHECK_ENDIAN__ to driver ccflags so that sparse will always check endianness by default. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16iwmc3200wifi: Fix sparse warningsSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath5k/ath9k: Fix 64 bits TSF readsBenoit Papillault
According to tests, both TSF lower and upper registers kept counting, so the higher part could have been updated after the lower part has been read, as shown in the following log where the upper part is read first and the lower part next. tsf = {00000003-fffffffd} tsf = {00000003-00000001} tsf = {00000004-0000000b} This patch corrects this by checking that the upper part has not been changed while the lower part was read. It has been tested in an IBSS network where artifical IBSS merges have been done in order to trigger hundreds of rollover for the TSF lower part. It follows the logic mentionned by Derek, with only 2 register reads needed at each additional steps instead of 3 (the minimum number of register reads is still 3). Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16ath9k_hw: add the PCI ID for the first AR9300 deviceLuis R. Rodriguez
The first AR9003 hardware family device supported is the AR9300, which has the vendor:device id 168c:0030 Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 01:09:01 +0000