summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-26power_supply: Convert i2c drivers to module_i2c_driverAxel Lin
Factor out some boilerplate code for i2c driver registration into module_i2c_driver. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Woogyom Kim <milo.kim@ti.com> Cc: Daniel Jeong <daniel.jeong@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Peter Edwards <sweetlilmre@gmail.com> Acked-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Add MODULE_DEVICE_TABLEAxel Lin
Add MODULE_DEVICE_TABLE to setup modalias for lp8727. Allows auto modprobing. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26charger-manager: Simplify charger_get_property(), get rid of a warningAnton Vorontsov
This patch fixes the following warning and makes the code a little bit more simpler: CC drivers/power/charger-manager.o charger-manager.c: In function 'charger_get_property': charger-manager.c:429:15: warning: 'i' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26charger-manager: Clean up for better readabilityAxel Lin
This patch includes below changes: * Some code change for better readability. * Current code in probe already ensures desc->charger_regulators is not NULL. No need to check if it is NULL or not before calling regulator_bulk_free(). * Use dev_get_drvdata() in cm_suspend_prepare() and cm_suspend_complete() Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26da9052-battery: Convert to use module_platform_driverAxel Lin
Use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26da9052-battery: Fix a memory leak when unload the moduleAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26da9052-battery: Add missing platform_set_drvdataAxel Lin
Add missing platform_set_drvdata in da9052_bat_probe. Otherwise, calling platform_get_drvdata in da9052_bat_remove returns NULL. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500: Turn unneeded global symbols into local onesAnton Vorontsov
The patch fixes the following sparse warning: drivers/power/ab8500_charger.c:1619:6: warning: symbol 'ab8500_charger_detect_usb_type_work' was not declared. Should it be static? drivers/power/abx500_chargalg.c:1709:24: warning: symbol 'abx500_chargalg_sysfs_ops' was not declared. Should it be static? drivers/power/ab8500_fg.c:2328:24: warning: symbol 'ab8500_fg_sysfs_ops' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_fg: Fix copy-paste errorAnton Vorontsov
ab8500_fg_discharge_state_to() function should accept 'enum ab8500_fg_discharge_state' argument, not 'enum ab8500_fg_charge_state'. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_fg: Get rid of 'struct battery_type'Anton Vorontsov
The struct is duplicated, plus causes the following flood: CC drivers/power/ab8500_fg.o ab8500_fg.c: In function ‘ab8500_fg_get_ext_psy_data’: b8500_fg.c:2081:8: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_fg: Get rid of 'struct v_to_cap'Anton Vorontsov
The struct is duplicated, plus when used it causes the following warnings: CHECK drivers/power/ab8500_fg.c ab8500_fg.c:818:13: warning: incorrect type in assignment (different base types) ab8500_fg.c:818:13: expected struct v_to_cap *tbl ab8500_fg.c:818:13: got struct abx500_v_to_cap *const v_to_cap_tbl CC drivers/power/ab8500_fg.o ab8500_fg.c: In function 'ab8500_fg_volt_to_capacity': ab8500_fg.c:818:6: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_btemp: Get rid of 'enum adc_therm'Anton Vorontsov
This is the same as abx500_adc_therm, but when the former is used, the following warning flood pops up: drivers/power/ab8500_btemp.c: In function 'ab8500_btemp_batctrl_volt_to_res': ab8500_btemp.c:150:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_curr_source_enable': ab8500_btemp.c:212:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:244:32: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_measure_temp': ab8500_btemp.c:462:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_id': ab8500_btemp.c:528:121: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:551:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] This patch fixes the issue by switching the driver to use more namespace-friendly enum. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500_charger: Convert to the new USB OTG callsAnton Vorontsov
This patch fixes the following build errors: ab8500_charger.c: In function 'ab8500_charger_remove': ab8500_charger.c:2519:2: error: implicit declaration of function 'otg_unregister_notifier' [-Werror=implicit-function-declaration] ab8500_charger.c:2520:2: error: implicit declaration of function 'otg_put_transceiver' [-Werror=implicit-function-declaration] ab8500_charger.c: In function 'ab8500_charger_probe': ab8500_charger.c:2688:2: error: implicit declaration of function 'otg_get_transceiver' [-Werror=implicit-function-declaration] ab8500_charger.c:2688:10: warning: assignment makes pointer from integer without a cast [enabled by default] ab8500_charger.c:2695:2: error: implicit declaration of function 'otg_register_notifier' [-Werror=implicit-function-declaration] Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500-btemp: AB8500 battery temperature driverArun Murthy
This driver is responsible for battery detection, obtaining battery temperature and monitor the battery temperature by taking precautionary measurements when battery temperature goes beyond or below the thresholds. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500-fg: A8500 fuel gauge driverArun Murthy
This driver is responsible for provide battery parameters to user space via sysfs by registers to power supply class. It uses fuel gauge and gpadc driver in obtaining the battery parameters. These battery properties are used by abx500 charging algorithm driver to monitor the battery. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26ab8500-charger: AB8500 charger driverArun Murthy
This driver is responsible for detecting the ac/usb plugin and also includes function to enable ac/usb charging and re-kick the watchdog. It registers with the power supply class and provides information to the user space. The information include status of ac/usb charger device. This information in turn will be used by the abx500 charging algorithm driver to enable/disable and monitor charging. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26abx500-chargalg: Add abx500 charging algorithmArun Murthy
This is a charging algorithm driver for abx500 variants. It is the central entity for battery driver and is responsible for charging and monitoring the battery driver. It is a hardware independant driver and also monitors other abx500 power supply devices. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26Add I2C driver for Summit Microelectronics SMB347 Battery Charger.Bruce E. Robertson
Driver support for the Summit I²C battery charger. This is used in some Intel devices. Signed-off-by: Bruce E. Robertson <bruce.e.robertson@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26isp1704_charger: Fix probe error pathFelipe Contreras
We enable power, but don't disable it in case of an error. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Correct typos on the commentKim, Milo
intergrated charger -> integrated charger ^ Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Add description of platform dataKim, Milo
Add brief description of lp8727_platform_data and lp8727_chg_param. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Fix wrong code styleKim, Milo
Definition of STATUS2 : remove space before tabs. Return code of lp8727_is_dedicated_charger(), lp8727_is_usb_charger() : remove parentheses when return is not a function. MODULE_AUTHOR section : remove space at the start of a line. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Change i2c functionsKim, Milo
On writing single byte via i2c, use i2c_smbus_write_byte_data() rather than i2c_smbus_write_i2c_block_data(). Name changes : lp8727_i2c_read() -> lp8727_read_bytes() lp8727_i2c_write() -> removed lp8727_i2c_read_byte() -> lp8727_read_byte() lp8727_i2c_write_byte() -> lp8727_write_byte() Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Add error check routine on probe()Kim, Milo
Add error checking on initializing registers and interrupt handler. Initializing registers - lp8727_init_device() : check i2c error during probing the driver. Initializing interrupt handler - lp8727_intr_config() : check an error on creating the irq thread. If an error occurs on probing lp8727 driver, allocated lp8727 driver memory is freed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26lp8727_charger: Add company name and descriptionKim, Milo
Add 'Texas Instruments' because TI acquired National semiconductor at 2011. And the driver information is added in the header file. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Make it possible to instantiate driver from DTKarol Lewandowski
Allow both device tree (preferred) and platform data-based driver instantiation. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042_battery: Use devm_kzalloc() where applicableKarol Lewandowski
This allows us to simplify probe and exit function. Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Change capacity property to use reported SOC registerDirk Brandewie
The SOC register (0dh) reports the state of charge before empty compensation adjustments are applied. The max value reported by this register will decrease as the battery ages. Use the RepSOC register (06h) to report the capacity of the battery. RepSOC contains a filtered version of the battery capacity after empty compensation adjustments have been applied. Reported-by: Gary Keyes <gary.e.keyes@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Add support for signalling change in SOCRamakrishna Pallala
If platform has the alert pin attached to an interrupt source have the driver signal a change in the SOC every 1 percent. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26max17042: Add POR init procedure from Maxim appnoteRamakrishna Pallala
Add power on reset (POR) init procedure defined by the maxim appnote. Using this procedure ensures that the part is configured/initialized correctly at POR and improves early accuracy of the fuel gauge and informs the fuel gauge with the battery characterization parameters. The battery characterization parameters come from the maxim characterization procedure. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-13max17042: Align register definitions with data sheet and init appnoteDirk Brandewie
align the register names with max17042 data sheet removing registers that are marked reserved that are not used. Add register definitions defined in the maxim initialization appnote Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-02-25Linux 3.3-rc5v3.3-rc5Linus Torvalds
2012-02-25Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Couple of minor driver fixes. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max34440) Fix resetting temperature history hwmon: (f75375s) Fix register write order when setting fans to full speed hwmon: (ads1015) Fix file leak in probe function hwmon: (max6639) Fix PPR register initialization to set both channels hwmon: (max6639) Fix FAN_FROM_REG calculation
2012-02-25Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild three kbuild fixes for 3.3: - make deb-pkg symlink race fix. - make coccicheck fix. - Dropping the check for modutils. This is not a regression, but allows the module-init-tools replacement kmod work with the 3.3 kernel. * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: coccicheck: change handling of C={1,2} when M= is set builddeb: Don't create files in /tmp with predictable names kbuild: do not check for ancient modutils tools
2012-02-25autofs: work around unhappy compat problem on x86-64Ian Kent
When the autofs protocol version 5 packet type was added in commit 5c0a32fc2cd0 ("autofs4: add new packet type for v5 communications"), it obvously tried quite hard to be word-size agnostic, and uses explicitly sized fields that are all correctly aligned. However, with the final "char name[NAME_MAX+1]" array at the end, the actual size of the structure ends up being not very well defined: because the struct isn't marked 'packed', doing a "sizeof()" on it will align the size of the struct up to the biggest alignment of the members it has. And despite all the members being the same, the alignment of them is different: a "__u64" has 4-byte alignment on x86-32, but native 8-byte alignment on x86-64. And while 'NAME_MAX+1' ends up being a nice round number (256), the name[] array starts out a 4-byte aligned. End result: the "packed" size of the structure is 300 bytes: 4-byte, but not 8-byte aligned. As a result, despite all the fields being in the same place on all architectures, sizeof() will round up that size to 304 bytes on architectures that have 8-byte alignment for u64. Note that this is *not* a problem for 32-bit compat mode on POWER, since there __u64 is 8-byte aligned even in 32-bit mode. But on x86, 32-bit and 64-bit alignment is different for 64-bit entities, and as a result the structure that has exactly the same layout has different sizes. So on x86-64, but no other architecture, we will just subtract 4 from the size of the structure when running in a compat task. That way we will write the properly sized packet that user mode expects. Not pretty. Sadly, this very subtle, and unnecessary, size difference has been encoded in user space that wants to read packets of *exactly* the right size, and will refuse to touch anything else. Reported-and-tested-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband One InfiniBand/RDMA regression fix for 3.3: - mlx4 SR-IOV changes added static exported functions, which doesn't build on powerpc at least. Fix from Doug Ledford for this. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Exported functions can't be static
2012-02-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 SCSI fixes on 20120224: "This is a set of assorted bug fixes for power management, mpt2sas, ipr, the rdac device handler and quite a big chunk for qla2xxx (plus a use after free of scsi_host in scsi_scan.c). " * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_dh_rdac: Fix for unbalanced reference count [SCSI] scsi_pm: Fix bug in the SCSI power management handler [SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost' [SCSI] qla2xxx: Update version number to 8.03.07.13-k. [SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx. [SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx. [SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle. [SCSI] qla2xxx: Remove check for null fcport from host reset handler. [SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers. [SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing. [SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command. [SCSI] qla2xxx: Add an "is reset active" helper. [SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand. [SCSI] qla2xxx: Propagate up abort failures. [SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded [SCSI] ipr: fix eeh recovery for 64-bit adapters [SCSI] mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
2012-02-24coccicheck: change handling of C={1,2} when M= is setGreg Dietsche
This patch reverts a portion of d0bc1fb4 so that coccicheck will work properly when C=1 or C=2. Reported-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] hdpvr: update picture controls to support firmware versions > 0.15 [media] wl128x: fix build errors when GPIOLIB is not enabled [media] hdpvr: fix race conditon during start of streaming [media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes [media] imon: don't wedge hardware after early callbacks
2012-02-24epoll: ep_unregister_pollwait() can use the freed pwq->wheadOleg Nesterov
signalfd_cleanup() ensures that ->signalfd_wqh is not used, but this is not enough. eppoll_entry->whead still points to the memory we are going to free, ep_unregister_pollwait()->remove_wait_queue() is obviously unsafe. Change ep_poll_callback(POLLFREE) to set eppoll_entry->whead = NULL, change ep_unregister_pollwait() to check pwq->whead != NULL under rcu_read_lock() before remove_wait_queue(). We add the new helper, ep_remove_wait_queue(), for this. This works because sighand_cachep is SLAB_DESTROY_BY_RCU and because ->signalfd_wqh is initialized in sighand_ctor(), not in copy_sighand. ep_unregister_pollwait()->remove_wait_queue() can play with already freed and potentially reused ->sighand, but this is fine. This memory must have the valid ->signalfd_wqh until rcu_read_unlock(). Reported-by: Maxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()Oleg Nesterov
This patch is intentionally incomplete to simplify the review. It ignores ep_unregister_pollwait() which plays with the same wqh. See the next change. epoll assumes that the EPOLL_CTL_ADD'ed file controls everything f_op->poll() needs. In particular it assumes that the wait queue can't go away until eventpoll_release(). This is not true in case of signalfd, the task which does EPOLL_CTL_ADD uses its ->sighand which is not connected to the file. This patch adds the special event, POLLFREE, currently only for epoll. It expects that init_poll_funcptr()'ed hook should do the necessary cleanup. Perhaps it should be defined as EPOLLFREE in eventpoll. __cleanup_sighand() is changed to do wake_up_poll(POLLFREE) if ->signalfd_wqh is not empty, we add the new signalfd_cleanup() helper. ep_poll_callback(POLLFREE) simply does list_del_init(task_list). This make this poll entry inconsistent, but we don't care. If you share epoll fd which contains our sigfd with another process you should blame yourself. signalfd is "really special". I simply do not know how we can define the "right" semantics if it used with epoll. The main problem is, epoll calls signalfd_poll() once to establish the connection with the wait queue, after that signalfd_poll(NULL) returns the different/inconsistent results depending on who does EPOLL_CTL_MOD/signalfd_read/etc. IOW: apart from sigmask, signalfd has nothing to do with the file, it works with the current thread. In short: this patch is the hack which tries to fix the symptoms. It also assumes that nobody can take tasklist_lock under epoll locks, this seems to be true. Note: - we do not have wake_up_all_poll() but wake_up_poll() is fine, poll/epoll doesn't use WQ_FLAG_EXCLUSIVE. - signalfd_cleanup() uses POLLHUP along with POLLFREE, we need a couple of simple changes in eventpoll.c to make sure it can't be "lost". Reported-by: Maxime Bizon <mbizon@freebox.fr> Cc: <stable@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Quoth Chris: "This is later than I wanted because I got backed up running through btrfs bugs from the Oracle QA teams. But they are all bug fixes that we've queued and tested since rc1. Nothing in particular stands out, this just reflects bug fixing and QA done in parallel by all the btrfs developers. The most user visible of these is: Btrfs: clear the extent uptodate bits during parent transid failures Because that helps deal with out of date drives (say an iscsi disk that has gone away and come back). The old code wasn't always properly retrying the other mirror for this type of failure." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: fix compiler warnings on 32 bit systems Btrfs: increase the global block reserve estimates Btrfs: clear the extent uptodate bits during parent transid failures Btrfs: add extra sanity checks on the path names in btrfs_mksubvol Btrfs: make sure we update latest_bdev Btrfs: improve error handling for btrfs_insert_dir_item callers Btrfs: be less strict on finding next node in clear_extent_bit Btrfs: fix a bug on overcommit stuff Btrfs: kick out redundant stuff in convert_extent_bit Btrfs: skip states when they does not contain bits to clear Btrfs: check return value of lookup_extent_mapping() correctly Btrfs: fix deadlock on page lock when doing auto-defragment Btrfs: fix return value check of extent_io_ops btrfs: honor umask when creating subvol root btrfs: silence warning in raid array setup btrfs: fix structs where bitfields and spinlock/atomic share 8B word btrfs: delalloc for page dirtied out-of-band in fixup worker Btrfs: fix memory leak in load_free_space_cache() btrfs: don't check DUP chunks twice Btrfs: fix trim 0 bytes after a device delete ...
2012-02-24Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
This is the arch/c6x part of commit 7c43185138cf ("Kbuild: Use dtc's -d (dependency) option") which was dropped because c6x had not yet been merged at the time. * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: Kbuild: Use dtc's -d (dependency) option
2012-02-24MAINTAINERS: drop me from PA-RISC maintenanceKyle McMartin
I don't even live in the same country as any of my PA-RISC hardware these days, so the odds of me touching the code are pretty low. (Also re-order things to ensure jejb gets CC'd since he's been the primary maintainer for the last few years.) Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24NOMMU: Don't need to clear vm_mm when deleting a VMADavid Howells
Don't clear vm_mm in a deleted VMA as it's unnecessary and might conceivably break the filesystem or driver VMA close routine. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24NOMMU: Lock i_mmap_mutex for access to the VMA prio listDavid Howells
Lock i_mmap_mutex for access to the VMA prio list to prevent concurrent access. Currently, certain parts of the mmap handling are protected by the region mutex, but not all. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SH/R-Mobile fixes for 3.3-rc5 * tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh: arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice ARM: mach-shmobile: r8a7779 PFC IPSR4 fix ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support arm: fix compile failure in mach-shmobile/board-ag5evm.c ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd ARM: mach-shmobile: simplify MMCIF DMA configuration ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix ARM: mach-shmobile: sh73a0 PINT IRQ base fix
2012-02-24Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
SuperH fixes for 3.3-rc5 * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr arch/sh: remove references to cpu_*_map. sh: Fix typo in pci-sh7780.c sh: add platform_device for SPI1 in setup-sh7757 sh: modify resource for SPI0 in setup-sh7757 sh: se7724: fix compile breakage sh: clkfwk: bugfix: use clk_reparent() for div6 clocks sh: clock-sh7724: fixup sh_fsi clock settings sh: sh7757lcr: update to the new MMCIF DMA configuration sh: fix the sh_mmcif_plat_data in board-sh7757lcr video: pvr2fb: Fix up spurious section mismatch warnings. sh: Defer to asm-generic/device.h.
2012-02-24mm: memcg: Correct unregistring of events attached to the same eventfdAnton Vorontsov
There is an issue when memcg unregisters events that were attached to the same eventfd: - On the first call mem_cgroup_usage_unregister_event() removes all events attached to a given eventfd, and if there were no events left, thresholds->primary would become NULL; - Since there were several events registered, cgroups core will call mem_cgroup_usage_unregister_event() again, but now kernel will oops, as the function doesn't expect that threshold->primary may be NULL. That's a good question whether mem_cgroup_usage_unregister_event() should actually remove all events in one go, but nowadays it can't do any better as cftype->unregister_event callback doesn't pass any private event-associated cookie. So, let's fix the issue by simply checking for threshold->primary. FWIW, w/o the patch the following oops may be observed: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 Pid: 574, comm: kworker/0:2 Not tainted 3.3.0-rc4+ #9 Bochs Bochs RIP: 0010:[<ffffffff810be32c>] [<ffffffff810be32c>] mem_cgroup_usage_unregister_event+0x9c/0x1f0 RSP: 0018:ffff88001d0b9d60 EFLAGS: 00010246 Process kworker/0:2 (pid: 574, threadinfo ffff88001d0b8000, task ffff88001de91cc0) Call Trace: [<ffffffff8107092b>] cgroup_event_remove+0x2b/0x60 [<ffffffff8103db94>] process_one_work+0x174/0x450 [<ffffffff8103e413>] worker_thread+0x123/0x2d0 Cc: stable <stable@vger.kernel.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-24hwmon: (max34440) Fix resetting temperature historyGuenter Roeck
Temperature history is reset by writing 0x8000 into the peak temperature register, not 0xffff. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-11 16:06:58 +0000