summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-31mac80211: Fix drop_unencrypted for MFP with hwaccelmaster-2010-03-31Jouni Malinen
Commit bef5d1c70d132145c0fc75b3586a19841a9a82e4 split ieee80211_drop_unencrypted() into separate functions that are used for Data and Management frames. However, it did not handle the RX_FLAG_DECRYPTED correctly for Management frames: ieee80211_drop_unencrypted() can only return 0 for Management frames, so there is no point in calling it here. Instead, just check the status->flag directly. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wireless/ipw2x00: remove trailing space in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ar9170usb: fix panic triggered by undersized rxstream bufferChristian Lamparter
While ar9170's USB transport packet size is currently set to 8KiB, the PHY is capable of receiving AMPDUs with up to 64KiB. Such a large frame will be split over several rx URBs and exceed the previously allocated space for rx stream reconstruction. This patch increases the buffer size to 64KiB which is in fact the phy & rx stream designed size limit. Cc: stable@kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=15591 Reported-by: Christian Mehlis <mehlis@inf.fu-berlin.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31include/net/iw_handler.h: Use SIOCIWFIRST not SIOCSIWCOMMIT in commentJoe Perches
to match use in IW_IOCTL_IDX macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31nl80211: reenable station del for meshMarco Porsch
iw dev <devname> station del <MAC address> is quiet useful in mesh mode and should be possible. Signed-off-by: Marco Porsch <marco.porsch@siemens.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: Do not indicate RX_FLAG_DECRYPTED for unprotected framesJouni Malinen
mac80211 skips drop_unencrypted checks if the driver/firmware has already taken care of this. In case of ath9k, we must not indicate that the frame was decrypted if no decryption was actually done. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: Fix dropping of unprotected robust multicast framesJouni Malinen
When selecting the RX key for group-addressed robust management frames, we do not actually select any BIP key if the frame is unprotected (since we cannot find the key index from MMIE). This results in the drop_unencrypted check in failing to drop the frame. It is enough to verify that we have a STA entry for the transmitter and that MFP is enabled for that STA; we do not need to check rx->key here. This fixes BIP processing for unprotected, group-addressed, robust management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: Fix BIP to be used only with group-addressed framesJouni Malinen
BIP (part of IEEE 802.11w) is only supposed to be used with group-addressed frames. We ended up picking it as a default mechanism for every management whenever we did not have a STA entry for the destination (e.g., for Probe Response to a STA that is not associated). While the extra MMIE in the end of management frames should not break frames completed in most cases, there is no point in doing this. Fix key selection to pick the default management key only if the frame is sent to multicast/broadcast address and the frame is a robust management frame. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: Send deauth/disassoc prior to dropping STA entryJouni Malinen
When management frame protection (IEEE 802.11w) is used, the deauthentication and disassociation frames must be protected whenever the encryption keys are configured. We were removing the STA entry and with it, the keys, just before actually sending out these frames which meant that the frames went out unprotected. The AP will drop them in such a case. Fix this by reordering the operations a bit so that sta_info_destroy_addr() gets called only after ieee80211_send_deauth_disassoc(). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: Track Beacon signal strength and implement cqm eventsJouni Malinen
Calculate a running average of the signal strength reported for Beacon frames and indicate cqm events if the average value moves below or above the configured threshold value (and filter out repetitive events with by using the configured hysteresis). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Fix TKIP encryptionSujith
Set IEEE80211_HW_RX_INCLUDES_FCS to indicate that the FCS is present in RX frames. Also, remove a redundant assignment of skb length and include the FCS_LEN when checking padding. Fixing this issue makes TKIP work. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: allocate tx and rx status information on stackFelix Fietkau
ath_tx_status and ath_rx_status data are only necessary for a short time, until they have been processed and converted into mac80211 data structures. Because of that, it makes no sense to keep them tied to the DMA descriptor, that only wastes precious memory. This patch allocates the data on stack in the functions that call the conversion functions from ath9k_hw. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: split out access to rx status informationFelix Fietkau
This patch passes in a pointer to the ath_rx_status data structure for functions that need it, instead of letting them grab it directly from the ath_desc struct. This is useful for making it possible to allocate the intermediate rx status data separately. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k: split out access to tx status informationFelix Fietkau
This patch passes in a pointer to the ath_tx_status data structure for functions that need it, instead of letting them grab it directly from the ath_desc struct. This is useful for making it possible to allocate the intermediate tx status data separately. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ipw2200: restart adapter only when abort_scan doesn't workZhu Yi
When a scan watchdog is fired, try to send abort scan command first before restarting the adapter. This avoids reconnection for some users when scan hang is detected. This fixed bug https://bugzilla.kernel.org/show_bug.cgi?id=15419 Reported-by: Maurizio Avogadro <mavoga@gmail.com> Tested-by: Maurizio Avogadro <mavoga@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Initialize HW opmodeSujith
Not setting the opmode properly during initialization results in the firmware sending up a bunch of packets before add_interface() has been called, for the first interface. This patch fixes the issue by setting the initial mode to 'managed'. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Handle TX queue overflowSujith
Stop/restart TX queues when the internal SKB queue is full. This helps handle TX better under heavy load. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Simplify RX URB managementSujith
This patch introduces the usage of URB anchors, thus reducing a large amount of code dealing with URB maintenance within the driver. The RX callback now takes care of freeing the SKB associated with each URB. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Fix watchdog pattern parsingSujith
Skip beyond the watchdog pattern properly. This fixes occasional failure of the driver to load. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_htc: Fix bug in aggregation initiationSujith
Accessing the sta pointer in TX completion without approprate RCU protection is wrong. Fix this. Also, RCU protection is needed when the station's aggregation state is updated. Handle this properly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31ath9k_common: Move RX filter code to ath9k_htcSujith
The calculation of RX filter is fairly different between ath9k and ath9k_htc, trying to make this common between the two drivers would result in code churn. While at it, remove the handling of PSPOLL filter, it can be added when(if) AP support is added to ath9k_htc. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: enable QoS explicitly in AP modeStanislaw Gruszka
Enable QoS explicitly, when user space AP program will setup a QoS queues. Currently this is not needed as iwlwifi not work in AP mode and no other driver implement enable/disable QoS. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31iwlwifi: manage QoS by mac stackStanislaw Gruszka
We activate/deactivate QoS and setup default queue parameters in iwlwifi driver. Mac stack do the same, so we do not need repeat that work here. Stack also will tell when disable QoS, this will fix driver when working with older APs, that do not have QoS implemented. Patch make "force = true" in iwl_active_qos() assuming we always want to do with QoS what mac stack wish. Patch also remove unused qos_cap bits, do not initialize qos_active = 0, as we have it initialized to zero by kzalloc. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: explicitly disable/enable QoSStanislaw Gruszka
Add interface to disable/enable QoS (aka WMM or WME). Currently drivers enable it explicitly when ->conf_tx method is called, and newer disable. Disabling is needed for some APs, which do not support QoS, such we should send QoS frames to them. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31iwlwifi: remove skb_linearize for rx framesZhu Yi
Remove skb_linearize() in the iwlwifi drivers since mac80211 supports paged rx SKBs now. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31mac80211: support paged rx SKBsZhu Yi
Mac80211 drivers can now pass paged SKBs to mac80211 via ieee80211_rx{_irqsafe}. The implementation currently use skb_linearize() in a few places i.e. management frame handling, software decryption, defragmentation and A-MSDU process. We will optimize them one by one later. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: Kalle Valo <kalle.valo@iki.fi> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31b43: N-PHY: fix value written on 2055 radio setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31b43: N-PHY: prepare for rev3+ channel tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31b43: N-PHY: find table entry earlier for setting chanspecRafał Miłecki
We do not want to partially change chanspec just to find out there is not entry in table for given channel. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31b43: N-PHY: use b43_phy_n_sfo_cfg rather than duplicating same fieldsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31b43: N-PHY: some dummy PHY rev 3 callsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wireless: rt2x00: rt2800usb: new idsXose Vazquez Perez
Taken from latest ralink linux driver(RT3070_LinuxSTA_V2.3.0.1_20100208) All of them are RT3070 devices. Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wireless: rt2x00: rt2800pci: new idXose Vazquez Perez
Taken from latest ralink linux driver, it's a RT3593 PCI/PCIe. Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wireless: rt2x00: rt2800usb: delete idXose Vazquez Perez
It was removed in the windows inf file by ralink. And it isn't on ralink linux drivers. Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wireless: rt2x00: rt2800usb: identify ids-chipsXose Vazquez Perez
Taken from ralink linux drivers: RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0B05,0x1784)}, /* Asus 3072 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x13D3,0x3305)}, /* AzureWave 3070*/ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x07D1,0x3C16)}, /* D-Link 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x203D,0x14A9)}, /* Encore 3070*/ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x1740,0x9707)}, /* EnGenius 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x1740,0x9708)}, /* EnGenius 3071 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x1740,0x9709)}, /* EnGenius 3072 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x04BB,0x0947)}, /* I-O DATA 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x04BB,0x0948)}, /* I-O DATA 3072 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x3822)}, /* MSI 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x3821)}, /* Ralink 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x3870)}, /* MSI 3070*/ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x3871)}, /* MSI 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x821A)}, /* Ralink 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x822A)}, /* MSI 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x870A)}, /* MSI 3070*/ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x871A)}, /* MSI 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DB0,0x899A)}, /* MSI 3070*/ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x20B8,0x8888)}, /* PARA INDUSTRIAL 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DF6,0x0048)}, /* Sitecom 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x0DF6,0x0047)}, /* Sitecom 3071 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x083A,0xA701)}, /* SMC 3070 */ RT3070_LinuxSTA_V2.3.0.1_20100208/common/rtusb_dev_id.c: {USB_DEVICE(0x083A,0xA702)}, /* SMC 3072 */ Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Fix msleep() delay while waiting for completionSaravanan Dhanabal
After last transmission, the device goes to sleep earlier than the configured dynamic power save timeout. If timeout is set to 400ms, device enters into sleep mode at around 330ms since from last TX. This patch removes the msleep(1), which causes the delay after ELP wakeup. Replaced with udelay(10), the variation is around 7-10ms. Signed-off-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Enable hardware keep alive messagesJuuso Oikarinen
This patch will enable the hardware keep-alive mode, configure the required template, configure keep-alive parameters, and re-order JOIN's and ACX_AID in such a way that the keep-alive is activated. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Add keep-alive frame template supportJuuso Oikarinen
Add support for keep-alive templates, which are indexed. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Configure HW connection monitorJuuso Oikarinen
This patch configures the mac80211 to not perform connection monitoring (periodic probe-requests) and instead rely on the hardware to do it. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Disconnect if PSM entry failsJuuso Oikarinen
If PSM entry fails despite of retries, assume that the AP has been lost, and indicate connection loss to the mac80211. This is much safer than remaining in active mode. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Configure probe-request template when associatedJuuso Oikarinen
Configure a probe-request template to the wl1271 when associated - the wl1271 will use this to attempt to recover a connection when beacon loss is detected. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Fix memory leak in firmware crash scenarioJuuso Oikarinen
The driver tx-queue flush operation leaks broadcast-frames. This leak occurs if the driver is shut down while there are frames in TX buffers (such as in a firmware crash scenario.) Fix the leak. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Removed checking of PSM from handling BSS_LOST_EVENTTeemu Paasikivi
Change the driver to call ieee80211_beacon_loss function always when BSS_LOST_EVENT is received. Reason for the change is that entering PSM might fail before driver receives BSS_LOST_EVENT. In such case the driver would disable PSM and the stack would not be notified about beacon loss and connection loss detection would be delayed by tens of seconds. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Update beacon interval properly for ad-hocJuuso Oikarinen
Configure the hardware beacon interval to whatever requested by the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Fix ad-hoc mode handlingJuuso Oikarinen
Fix the driver to better reflect the ad-hoc related configuration from the mac80211. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Disable connection monitoring while not associatedJuuso Oikarinen
The wl1271 does not support disabling the connection monitor feature. Perform the next best thing by increasing the beacon-loss threshold and BSS_LOSE event timeout to the maximum values. This is needed, because we really don't want any random probe-requests during scanning or especially while in ad-hoc mode and not beaconing. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: remove deprecated usage of RX status noiseLuciano Coelho
The noise element in the ieee80211_rx_status struct has been deprecated in commit "mac80211: deprecate RX status noise". Remove the usage of this element from wl1271_rx.c to avoid warnings. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: wait for disconnect command complete eventLuciano Coelho
Wait for the DISCONNECT_EVENT_COMPLETE_ID event after sending a disconnect command. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: wait for join command complete eventLuciano Coelho
Poll for join command completion instead of waiting blindly for 10 msecs. There is a timeout of 100 msecs, if the command doesn't complete by then, we return an error code. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-31wl1271: Remove device MAC-address randomizationJuuso Oikarinen
This patch removes the MAC address randomization from the driver. This removes a nasty Nokia-OUI dependency from the driver. With this patch, unless an address is explicitly configured to the driver by the user, only a zero address will be configured, and the driver will be unable to start. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-30 00:39:49 +0000