summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-09-28[PATCH] Fix ext3_new_inode() failure pathsChris Sykes
Fix failure paths in ext3_new_inode() and clean up duplicated code: - DQUOT_DROP() was not being called if ext3_init_security() failed. Signed-off-by: Chris Sykes <chris@sigsegv.plus.com> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] Fix ext2_new_inode() failure pathsChris Sykes
Fix failure paths in ext2_new_inode() and clean up duplicated code: - DQUOT_DROP() was not being called if ext2_init_security() failed. Signed-off-by: Chris Sykes <chris@sigsegv.plus.com> Cc: Stephen Smalley <sds@epoch.ncsc.mil> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] fuse: check reserved node ID valuesMiklos Szeredi
This patch checks reserved node ID values returned by lookup and creation operations. In case one of the reserved values is sent, return -EIO. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] fuse: add required version infoMiklos Szeredi
Add information about required version of the userspace library/utilities to Documentation/Changes. Also add pointer to this and to FUSE documentation from Kconfig. Thanks to Anton Altaparmakov for the reminder. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] mm: move_pte to remap ZERO_PAGENick Piggin
Move the ZERO_PAGE remapping complexity to the move_pte macro in asm-generic, have it conditionally depend on __HAVE_ARCH_MULTIPLE_ZERO_PAGE, which gets defined for MIPS. For architectures without __HAVE_ARCH_MULTIPLE_ZERO_PAGE, move_pte becomes a noop. From: Hugh Dickins <hugh@veritas.com> Fix nasty little bug we've missed in Nick's mremap move ZERO_PAGE patch. The "pte" at that point may be a swap entry or a pte_file entry: we must check pte_present before perhaps corrupting such an entry. Patch below against 2.6.14-rc2-mm1, but the same bug is in 2.6.14-rc2's mm/mremap.c, and more dangerous there since it's affecting all arches: I think the safest course is to send Nick's patch and Yoichi's build fix and this fix (build tested) on to Linus - so only MIPS can be affected. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-09-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-09-27[PATCH] Make POSIX message queue sys_mq_open() honor umaskKrzysztof Benedyczak
We ignored umask when creating new queues via mq_open (when creating with open() on mqueue fs it is ok of course). According to the specification this a bug. This trivial patch fixes this. Signed-off-by: Krzysztof Benedyczak <golbi@mat.uni.torun.pl> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-27[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: misc. fixesMichael Chan
Fix interrupt test handler by adding check for IRQ assertion in PCI_STATE register in addition to the status block updated bit. Add test for valid ethernet address in tg3_set_mac_addr(). Add tg3_bus_string() to setup the PCI bus speed/width string for all PCI/PCIX/PCI Express devices. This is used to print the bus type during init_one(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[TG3]: 5780 PHY fixesMichael Chan
Fix 5780 PHY related problems: 1. MAC_RX_MODE reset must be done before setting up the MAC_MODE register on 5705_PLUS chips or the chip will stop receiving after a while. The MAC_RX_MODE reset is needed to prevent intermittently losing the first receive packet on serdes chips. 2. Skip MAC loopback test on 5780 because of hardware errata. Normal traffic including PHY loopback is not affected by the errata. 3. PHY loopback fails intermittently on 5708S and this is fixed by putting the PHY in loopback mode first before programming the MAC mode register. A MAC_RX_MODE reset is also added. 4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow nway_reset if 5780S is in parallel detect mode. 5. Add missing PHY IDs in KNOWN_PHY_ID() macro. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27[NEIGH]: Add debugging check when adding timers.David S. Miller
If we double-add a neighbour entry timer, which should be impossible but has been reported, dump the current state of the entry so that we can debug this. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-09-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds
2005-09-26[PATCH] missing dependency on arm O= buildsAl Viro
arm maketools needs include/asm-arm in place in the build tree. On normal builds it's always there, of course, but on O= it's created (by generic code) too late - when we get to asm-offset.h. We used to get away with that by accident - creation of include/asm-arm/arch symlink creates include/asm-arm and it happened to go before maketools. However, we did not have such dependency, so that luck didn't last - now maketools is picked first and we are screwed. Both the symlink and maketools are prerequisites of the same target (archprepare). This fix is obvious - make the latter explicitly depend on the former and be done with that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[PATCH] m32r: more basic __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[PATCH] m32r: set CHECKFLAGS properlyAl Viro
We do _not_ need "sparse" in sparse arguments ;-) What we do need is __BIG_ENDIAN__; right now unconditional, when m32r starts using CPU_LITTLE_ENDIAN, we'll need to adjust. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[PATCH] m32r: missing __iomem in ioremap() declarationAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[PATCH] useless includes of linux/irq.h in arch/i386Al Viro
Most of these guys are simply not needed (pulled by other stuff via asm-i386/hardirq.h). One that is not entirely useless is hilarious - arch/i386/oprofile/nmi_timer_int.c includes linux/irq.h... as a way to get linux/errno.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[PATCH] missing asm/irq.h (cs89x0)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-26[SPARC64]: Do not do TLB pre-filling any more.David S. Miller
In order to do it correctly on UltraSPARC-III+ and later we'd need to add some complicated code to set the TAG access extension register before loading the TLB. Since this optimization gives questionable gains, it's best to just remove it for now instead of adding the fix for Ultra-III+ Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[SPARC64]: Simplify Spitfire D-cache page flush.David S. Miller
It tries to batch up the tag loads and comparisons, and then the stores. And this is just complicated instead of efficient. Also, make the symbol of the Cheetah version more grepable. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26Merge master.kernel.org:/pub/scm/linux/kernel/git/acme/llc-2.6David S. Miller
2005-09-26[NETFILTER]: Fix invalid module autoloading by splitting iptable_natHarald Welte
When you've enabled conntrack and NAT as a module (standard case in all distributions), and you've also enabled the new conntrack netlink interface, loading ip_conntrack_netlink.ko will auto-load iptable_nat.ko. This causes a huge performance penalty, since for every packet you iterate the nat code, even if you don't want it. This patch splits iptable_nat.ko into the NAT core (ip_nat.ko) and the iptables frontend (iptable_nat.ko). Threfore, ip_conntrack_netlink.ko will only pull ip_nat.ko, but not the frontend. ip_nat.ko will "only" allocate some resources, but not affect runtime performance. This separation is also a nice step in anticipation of new packet filters (nf-hipac, ipset, pkttables) being able to use the NAT core. Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[AF_PACKET]: Remove bogus checks added to packet_sendmsg().David S. Miller
These broke existing apps, and the checks are superfluous as the values being verified aren't even used. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[IPV6]: Fix [Bug 5306] Oops on IPv6 route lookupHerbert Xu
> Steps to reproduce: > 1. Boot Linux, do NOT setup any IPv6 routes > 2. ip route get 2001::1 (or any unroutable address) Well caught. We never set rt6i_idev on ip6_null_entry. This patch should make the problem go away. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[CONNECTOR]: async connector mode.Evgeniy Polyakov
If input message rate from userspace is too high, do not drop them, but try to deliver using work queue allocation. Failing there is some kind of congestion control. It also removes warn_on on this condition, which scares people. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[NET]: Make sure ctl buffer is aligned properly in sys_sendmsg().Alex Williamson
It's on the stack and declared as "unsigned char[]", but pointers and similar can be in here thus we need to give it an explicit alignment attribute. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-26[ARM] 2936/1: ixp4xx default config fixesVincent Sanders
Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26[ARM] 2935/1: ixp4xx: fix warnings in ixp4xx_set_irq_typeDavid Vrabel
Patch from David Vrabel Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26NTFS: Re-fix sparse warnings in a more correct way, i.e. don't use an enum withAnton Altaparmakov
different types in it but #define the two constants instead. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26[ARM] Remove SA_IRQNOMASKRussell King
SA_IRQNOMASK is unused, remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26[PATCH] pcmcia: fix cross-platform issues with pcmcia module aliasesKars de Jong
- Added a missing TO_NATIVE call to scripts/mod/file2alias.c:do_pcmcia_entry() - Add an alignment attribute to struct pcmcia_device_no to solve an alignment issue seen when cross-compiling on x86 for m68k. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: update ID for NinjaATADominik Brodowski
Christian Zoz reported there are multiple NinjaATA devices all sharing the second product ID string, but not the first one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: more ENE bridgesDaniel Ritz
Adds better support for the CB-710, CB-712, CB-720 and CB-722 bridges from EnE Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: new IDs for serial_csDominik Brodowski
Add new ID to serial_cs.c; the CIS fimware override is available by the manufacturer at http://www.sierrawireless.com . Remember to name the CIS binary SW_7xx_SER.cis and to put it into /lib/firmware/ Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: add support for more TI bridgesDaniel Ritz
Support some more TI cardbus bridges. most of them are multifunction devices which adds 1394 controllers, smartcard readers etc. this could also help with the various problems with the XX21 controllers seen on the linux-pcmcia list. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] pcmcia: fix Kconfig dependencyKomuro
TCIC depends on ISA. It is used with ISA-bus system only. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: tiny cleanupDominik Brodowski
pci_set_power_state is not needed, as we call pci_enable_device() somewhere else. Also, the resource we write to PCI_BASE_ADDRESS_0 needs to be converted to bus-centric view first. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: don't mess with bridge control registerDaniel Ritz
In interrupt probing (both ISA and PCI) the bridge control register is used to change interrupt routing to ISA or PCI by changing bit 7. But this bit only controls the routing of card functional interrupts, not the CSC interrupts which are used for interrupt probing. A bad side effect of messing with this register in yenta_probe_irq() is that it can lead to irq storms if a card is inserted and already powered by the BIOS. Usage in yenta_sock_init() and yenta_config_init() seem to be fishy as well. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26[PATCH] yenta: auto-tune EnE bridges for CardBus cardsDaniel Ritz
Echo Audio cardbus products are known to be incompatible with EnE bridges. in order to maybe solve the problem a EnE specific test bit has to be set, another cleared...but other setups have a good chance to break when just forcing the bits. so do the whole thingy automatically. The patch adds a hook in cb_alloc() that allows special tuning for the different chipsets. for ene just match the Echo products and set/clear the test bits, defaults to do the same thing as w/o the patch to not break working setups. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-26Merge branch 'master' of /home/src/linux-2.6/Anton Altaparmakov
2005-09-26NTFS: More $LogFile handling fixes: when chkdsk has been run, it can leave theAnton Altaparmakov
restart pages in the journal without multi sector transfer protection fixups (i.e. the update sequence array is empty and in fact does not exist). Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26NTFS: Fix the definition of the CHKD ntfs record magic. It had an off byAnton Altaparmakov
two error causing it to be CHKB instead of CHKD. Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-26[SPARC64]: Probe D/I/E-cache config and use.David S. Miller
At boot time, determine the D-cache, I-cache and E-cache size and line-size. Use them in cache flushes when appropriate. This change was motivated by discovering that the D-cache on UltraSparc-IIIi and later are 64K not 32K, and the flushes done by the Cheetah error handlers were assuming a 32K size. There are still some pieces of code that are hard coding things and will need to be fixed up at some point. While we're here, fix the D-cache and I-cache parity error handlers to run with interrupts disabled, and when the trap occurs at trap level > 1 log the event via a counter displayed in /proc/cpuinfo. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-25[SPARC64]: Add CONFIG_DEBUG_PAGEALLOC support.David S. Miller
The trick is that we do the kernel linear mapping TLB miss starting with an instruction sequence like this: ba,pt %xcc, kvmap_load xor %g2, %g4, %g5 succeeded by an instruction sequence which performs a full page table walk starting at swapper_pg_dir. We first take over the trap table from the firmware. Then, using this constant PTE generation for the linear mapping area above, we build the kernel page tables for the linear mapping. After this is setup, we patch that branch above into a "nop", which will cause TLB misses to fall through to the full page table walk. With this, the page unmapping for CONFIG_DEBUG_PAGEALLOC is trivial. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-25[ARM] 2934/1: Anubis - fix VA offsets for CPLD registersBen Dooks
Patch from Ben Dooks The VA addresses of the Anubis CPLD registers confoict with the addresses for the ISA space maps used by the rest of the s3c2410 architecture Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24[SPARC64]: Fix mask formation in tomatillo_wsync_handler()David S. Miller
"1" needs to be "1UL", this is a 64-bit mask we're creating. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-24[NETFILTER] ip_conntrack: Update event cache when status changesHarald Welte
The GRE, SCTP and TCP protocol helpers did not call ip_conntrack_event_cache() when updating ct->status. This patch adds the respective calls. Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 02:12:14 +0000