summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-22misc: compdev addedMaciej Socha
This driver is needed to support new display composition cases in HC/ICS. The driver is similar to the dispdev driver but not the same. ST-Ericsson ID: 350337 ST-Ericsson FOSS-OUT ID: NA Change-Id: Ide63b6f3994dece44259ac25da26b06a2fcca832 Signed-off-by: Jörgen Nilsson <jorgen.nilsson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42890 Reviewed-by: Per-Daniel OLSSON <per-daniel.olsson@stericsson.com> Tested-by: Per-Daniel OLSSON <per-daniel.olsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22video: mcde: Add dsi/dpi freq settingsJimmy Rubin
For U8500, the clocks used by DSI is dsilp and dsihs. These clock rates of these clocks must be specified in the port struct. The lcd clk is set from the port struct. ST-Ericsson ID: 359227, 352847 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I089a736da281014902ca8d503e72a572c9ce1bbe Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42452 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22arm: ux500: Add new dsi clocks for mcdeJimmy Rubin
dsi_pll, dsi0clk, dsi1clk and dsixescclk is added to the clock struct for u8500. Set rate of dsi_pll, hdmi and tv clk is performed in init_display_devices in board-mop500-mcde.c ST-Ericsson ID: 359227, 352847 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I2628212112716df7738e285d3063c6927f71b02e Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/42451 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com>
2012-05-22u8500: mcde: Wrong gpio used for sony displayJimmy Rubin
For HREF, GPIO65 should be used for the main display. ST-Ericsson ID: 401537 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I4d7f8c0bd85a6a015b0f483267668db4504e74e7 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40912 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22video: mcde: Update power on/off sequence for SonyJimmy Rubin
The sony display driver did not properly handle the reset gpio during power on / power off. In power off the the reset gpio is set to 0. ST-Ericsson ID: 401537 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie954e8e9a9b829029409885ccf92df1963ceb951 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40911 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: QATEST Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22video: mcde: Handle MCDE_DISPLAY_PM_ON in probeJimmy Rubin
When startup graphics is enabled, valid power modes are MCDE_DISPLAY_PM_ON and MCDE_DISPLAY_PM_STANDBY. Handling of MCDE_DISPLAY_PM_ON is added to the probes of the displays. ST-Ericsson ID: 400915 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I3d268096ac3640c53f20811e7dc0988b0b605ffe Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40910 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22video: mcde: Fix build warningJimmy Rubin
In update_overlay_registers, fifo_size was not used anymore. This variable is removed. ST-Ericsson ID: 401522 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ib2e741d1e26d8457441387e5516342f7e4855ba3 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40909 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22b2r2: Support in driver for multiple b2r2 devicesJörgen Nilsson
The b2r2 driver needs to support dual configuration for 9540. The patch contains multi device support, however the upper bound is capped to one. The cap needs to be raised when the driver has been verified to work with the 9540 HW. ST-Ericsson Linux next: NA ST-Ericsson ID: 355461 ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jörgen Nilsson <jorgen.nilsson@stericsson.com> Change-Id: Ide0f860f70fae3565e161775a6c99fd9214dc5ac Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37633 Reviewed-by: Maciej SOCHA <maciej.socha@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Tested-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Robert LIND <robert.lind@stericsson.com>
2012-05-22video: mcde: Enter ULPM before dsi is disabledJimmy Rubin
When the display shuts down after the display has been set in sleep mode, the correct MIPI is sequence is LP-11, LP-10, LP-00. This means that the DSI lanes/clock must first be put in idle, then enter ulpm for data lanes and after that ulpm for clock lane. After this VANA can be turned off. ST-Ericsson ID: 369162 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I63abead58bac975c94425f6cfba86ba268af1950 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Signed-off-by: Anders Bauer <anders.bauer@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35469 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22video: mcde: Avoid set_video_mode when in OFF statePer Persson
set_video command is avoided when the display device is in powered off state. ST-Ericsson ID: 398840, 399022 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ida9ede0cafaecd4bffe18b3fb1aad88bbf07586d Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/40767 Reviewed-by: Anders BAUER <anders.bauer@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22video: mcde: Add new display id for Sony driver.Baptiste Chauloux
Currently only 0x1b81 is supported, with this patch 0x1a81 is added as well ST-Ericsson ID: 374867 ST-Ericsson FOSS-OUT ID: NA Change-Id: Idaf31050011d9f01c62d82fdea7fcb7103c95b4c Signed-off-by: Baptiste Chauloux <baptiste.chauloux@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/38437 Reviewed-by: QABUILD Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22drivers: video: av8100: Stop printing chip version at every resumeJonas Aaberg
Move chip version detection from power-up to probe. ST-Ericsson Linux next: - ST-Ericsson ID: 370799 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ic0870b2565ca71318c06cd0a24a33ccca3f863cb Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/39186 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22b2r2: Improve image quality for large zoom blitsMaciej Socha
The bilinear filter kernel is essentially reduced in size so the output is affected by fewer surrounding pixels. Destination pixels that are close to high contrast edges can otherwise be contaminated by content from the opposite side of the edge. ST-Ericsson ID: 367586 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I9cd8b8a7e0e3d36f987ee4fd96abebc42bb94628 Signed-off-by: Maciej Socha <maciej.socha@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/38272 Reviewed-by: Nils CALMSUND <nils.calmsund@stericsson.com> Tested-by: Nils CALMSUND <nils.calmsund@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22mcde: Read mcde_clk_rate, used in dsi_delay0Magnus Smith
Read the mcde_clk_rate in HZ, to use for calculation of dsi_delay0. ST-Ericsson ID: 368861 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ice950a0b30d5cb92c7b0d31aebd65d3b1981ed63 Signed-off-by: Magnus Smith <qsmimag@steludxu2757.(none)> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36795 Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Magnus SMITH <magnus.xm.smith@stericsson.com> Tested-by: Magnus SMITH <magnus.xm.smith@stericsson.com>
2012-05-22b2r2: Modify src and dst rect to avoid clippingMaciej Socha
Whenever the destination rectangle is larger than the destination image or extends outside that image, source and destination rectangles are modified to avoid the clipping operation. The background rectangle is also modified if a separate background image is supplied. ST-Ericsson ID: 372917 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia00f287fd3c344316349e650caaded17725b9ee4 Signed-off-by: Maciej Socha <maciej.socha@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36792 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Reviewed-by: Per-Daniel OLSSON <per-daniel.olsson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-05-22video: mcde: Configure the correct output fifosizeJayarami Reddy
Configure the correct output fifosize to avoid underflow and fix display overlap issue for u5500. ST-Ericsson ID: 366427 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I5cacd1728fa9067568be8d6a9ed0e744055546e7 Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/37183 Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: mcde: add DSI video mode supportAnders Bauer
This patch adds support for DSI video mode. ST-Ericsson Linux next: - ST-Ericsson ID: 365705 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I103bed18f814e85e48bc687b6b08b4829be347a6 Signed-off-by: Anders Bauer <anders.bauer@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36517 Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22video: mcde: add synch source formatterAnders Bauer
This synch source is used when the formatter shall trigger a new frame. Synch source formatter is currently used for DSI video mode. ST-Ericsson Linux next: - ST-Ericsson ID: 365705 ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Id362fb6fbff0a15bd8924117ec019b1e1b511032 Signed-off-by: Anders Bauer <anders.bauer@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/36447 Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com>
2012-05-22ARM: ux500: mcde: Coding style fixesPhilippe Langlais
Fix the most obvious violations of the kernel coding style Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
2012-05-22b2r2: Correct scaling to multi-buffer formatMaciej Socha
A scaling operation from raster to a multi-buffer format, requires the raster input to be scaled before luminance information can be extracted. Raster input is scaled by the chroma resizer. Luma resizer only handles luminance data which exists in a separate buffer in source image, as is the case with YUV planar/semi-planar formats. ST-Ericsson ID: 371067 ST-Ericsson Linux next: N/A ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I1bcdd4ead2b6e06bfa62f330d35a177e2890956e Signed-off-by: Maciej Socha <maciej.socha@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35958 Reviewed-by: QATOOLS Reviewed-by: Robert LIND <robert.lind@stericsson.com> Reviewed-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: mcde: Add host_eot_gen propertyJimmy Rubin
Some DSI displays requires a EOT packet after a transfer in HS. This is optional in the MIPI standard and dependant on the display IC if it should be used or not. ST-Ericsson ID: 367923 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ia7f8d37cd0ab80847a6098489790d133dbcccb64 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35324 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
2012-05-22b2r2: Add support for blending on background imageJörgen Nilsson
Instead of blending only on the destination there is now a possibility to blend on a supplied background using standard blending flags. The background blending option is enabled through setting a flag in the request. When background blending is enabled the destination blending is omitted and the destination buffer is simply overwritten. ST-Ericsson Linux next: NA Depends-On: I85ba9d0006e7480167f72f2a6b5c9d8fff272813, Ia34f98cfb20e2f0486049e82581dcea28b465ed4, I5cbeb4525a98a5b9884c3464154182810ee7449b ST-Ericsson ID: 350337 ST-Ericsson FOSS-OUT ID: Trivial Introduce non-backward compatible changes to exposed interfaces Signed-off-by: Jörgen Nilsson <jorgen.nilsson@stericsson.com> Change-Id: Ifeb8eb66c2fed97c541b09715a17251a81e493ab Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34023 Tested-by: Jorgen NILSSON <jorgen.nilsson@stericsson.com> Reviewed-by: Maciej SOCHA <maciej.socha@stericsson.com> Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
2012-05-22video: mcde: use DSI display with one data laneAnders Bauer
This patch enables using displays with one DSI data lane. ST-Ericsson ID: 359227 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I852c55060c5c4ffa8b50eb6b8dbc3e002d4fe658 Signed-off-by: Anders Bauer <anders.bauer@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35323 Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22mach: ux500: Make fb create code genericMarcus Lorentzon
fbdev create use an hmdi specific function. This patch remove that function and makes fbcreate generic and shared. ST-Ericsson ID: 369972 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I8a4b148bb6a01cde74fbe7c4fb30e9d7ee77ef68 Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35244 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Robert MARKLUND <robert.marklund@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: av8100: Remove fb on/off machine dependencyMarcus Lorentzon
AV8100 driver is calling into an external function defined in mach-ux500 making this driver statically machine dependant. This patch attempt to remove this dependency. ST-Ericsson ID: 369972 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Iff8943905ea7b1a072feb5d6a42886daed33a6a9 Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35243 Reviewed-by: QATOOLS Reviewed-by: QABUILD Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22ux500: mcde: Remove static board configurationMarcus Lorentzon
Make device registration more dynamic using mach_is_xxx() and uib_is_xxx() type of calls instead of having compile time Kconfig settings. And clean out most unused static configuration data. ST-Ericsson ID: 368402 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I37dad7a96017e8f48f77645a4ef417632035651e Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34285
2012-05-22ux500: mcde: Remove DSI generic deviceMarcus Lorentzon
Remove DSI generic device from u5500 board since it's no longer used/supported in that config. ST-Ericsson ID: 368802 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I7b2ef387e1a4333a06d99b9c90cd6c4ad884bd1c Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34407 Reviewed-by: QATOOLS
2012-05-22ux500: mcde: Remove DPI display deviceMarcus Lorentzon
DPI display device is no longer used or supported ST-Ericsson ID: 368801 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: If32b34580ab01c74a2b8b91961d6f267550f8252 Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34406 Reviewed-by: QATOOLS
2012-05-22ux500: mcde: Remove unnecessary MCDE fbdev updateMarcus Lorentzon
The first fbdev update in board-xxx-mcde.c is not needed. Screen will be updated at first fbdev pan. ST-Ericsson ID: 365249, 361835 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I8055448e9be967530b783734473a32d579ba74fd Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34120 Reviewed-by: QATOOLS Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: av8100: free irq when powerdownPer Persson
irq is requested when chip is powered up and freed when powered down. ST-Ericsson ID: 368561 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I42145787b15630a7c09a28887f76026b2b9004e0 Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34495 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: av8100: Update suspend resume methodPer Persson
Driver is updated to use dev_pm_ops suspend/resume method. ST-Ericsson ID: 368266 ST-Ericsson Linux next: Not tested ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ibaaeac502d30d8ee8484bce74e829f1fbe41ceed Signed-off-by: Per Persson <per.xb.persson@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34494 Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: mcde: Add support for 4_1_3 hardwareJimmy Rubin
MCDE version 4.1.3 is used in db9540 v1. ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I50c6d551df79f5f2b65254f3f3176520b909ccc9 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33969 Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Update mcde_regs.hJimmy Rubin
Updates mcde_regs.h according to new hardware specification. No functional changes just renaming of constants. ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I45c4d84bf35c48cc0ea02f372451fc5ca6f89b17 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33327 Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Remove hardware specifics variablesJimmy Rubin
Num_channels, num_overlays and num_dsilinks is not used anymore. ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I00340680e9748f6661da148cd7fa3b48d1bb37fe Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33968 Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Remove hardware version handlingJimmy Rubin
Hardware version is not needed anymore, since the probe handles all specific properties that are hardware version dependant. ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Change-Id: I198c6af00ca1dbe39b269a4f8e17992b773a4fd5 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33323 Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Remove MCDE_1_0_4 version supportJimmy Rubin
This MCDE version is used in db5500 v1 ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Change-Id: Ib5a4ca054661f06bd3541021b1404f2c000010bc Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33322 Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Remove MCDE 3_0_5 version supportJimmy Rubin
This MCDE version is used in db8500 v1. ST-Ericsson ID: 362765 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: Ie5039e8d2bb838c900f6b14c18cce097f57a393d Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33321 Reviewed-by: QATOOLS Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com> Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22ux500: mcde: Shift the rotation buffer addressbarge
Shift the rotation buffer address by 8k to free space for dma lcla area. Do that for all displays. ST-Ericsson ID: 364165 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I4bc5b72f6d198f26c7b48572cb3843d18c6b8553 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34168 Reviewed-by: Sylvain BARGE <sylvain.barge@stericsson.com> Tested-by: Sylvain BARGE <sylvain.barge@stericsson.com> Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
2012-05-22video: mcde: Include export.h after 3.2 updatePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22av8100: Update firmwareJohn Fredriksson
HDMI AV8100 fw is updated to ver 0_3_0. Supports chip cut version 3.0. Fixes a TVout bug. Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
2012-05-22mach-ux500: mcde: Change default color for hdmi fb.John Fredriksson
mach-ux500: mcde: Change pixel format to RGB565 to make mali graphics work. Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
2012-05-22video: Include module.h after 3.2 updatePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22mach-ux500: Include mach-ux500 Display specifics config flagsPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2012-05-22misc: Add dispev driver compilationPhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2012-05-22video: mcde: Remove unused MCDE auto syncMarcus Lorentzon
Auto sync for command mode displays are no longer used and should be implemented in fbdev if needed. ST-Ericsson ID: 365249 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: Ie67744bebf8d5b7049d055077814460959f86172 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33801 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22ux500: mcde: Remove unused MCDE auto syncMarcus Lorentzon
Auto sync for command mode displays are no longer used and should be implemented in fbdev if needed. ST-Ericsson ID: 365249 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22ux500: mcde: Remove unused codeMarcus Lorentzon
mcde_get_main_display is not used in the kernel. ST-Ericsson ID: 365249 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784 Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com> Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Remove sony display platform dataJimmy Rubin
Removes driver specific fields from platform_data in sony display driver. ST-Ericsson ID: 321190 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I2d8a74716de1b8972ab1b5a145e7c1e66896de3d Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32719 Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22ux500: mcde: Remove sony display data from boardJimmy Rubin
Removes sony display driver specific data from board-xxx-mcde.c ST-Ericsson ID: 321190 ST-Ericsson Linux Next: NA ST-Ericsson FOSS-OUT ID: Trivial Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718 Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com> Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
2012-05-22video: mcde: Move driver data to sony displayJimmy Rubin
Some driver data that are located in the board file should be filled in by the display driver instead ST-Ericsson ID: 321190 ST-Ericsson Linux next: NA ST-Ericsson FOSS-OUT ID: Trivial Change-Id: I564462d9806cfde90de25ff436e0d4946682ef23 Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32595 Reviewed-by: QABUILD Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 08:15:56 +0000