Age | Commit message (Collapse) | Author |
|
Make device registration more dynamic using mach_is_xxx()
and uib_is_xxx() type of calls instead of having compile
time Kconfig settings. And clean out most unused static
configuration data.
ST-Ericsson ID: 368402
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I37dad7a96017e8f48f77645a4ef417632035651e
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34285
|
|
Remove DSI generic device from u5500 board
since it's no longer used/supported in that config.
ST-Ericsson ID: 368802
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I7b2ef387e1a4333a06d99b9c90cd6c4ad884bd1c
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34407
Reviewed-by: QATOOLS
|
|
DPI display device is no longer used or supported
ST-Ericsson ID: 368801
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: If32b34580ab01c74a2b8b91961d6f267550f8252
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34406
Reviewed-by: QATOOLS
|
|
The first fbdev update in board-xxx-mcde.c is not
needed. Screen will be updated at first fbdev pan.
ST-Ericsson ID: 365249, 361835
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I8055448e9be967530b783734473a32d579ba74fd
Signed-off-by: Marcus Lorentzon <marcus.xm.lorentzon@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34120
Reviewed-by: QATOOLS
Reviewed-by: Jayarami REDDY <jayarami.reddy@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
irq is requested when chip is powered up and freed when
powered down.
ST-Ericsson ID: 368561
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I42145787b15630a7c09a28887f76026b2b9004e0
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34495
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Driver is updated to use dev_pm_ops suspend/resume method.
ST-Ericsson ID: 368266
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ibaaeac502d30d8ee8484bce74e829f1fbe41ceed
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34494
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
MCDE version 4.1.3 is used in db9540 v1.
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I50c6d551df79f5f2b65254f3f3176520b909ccc9
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33969
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Updates mcde_regs.h according to new hardware specification.
No functional changes just renaming of constants.
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I45c4d84bf35c48cc0ea02f372451fc5ca6f89b17
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33327
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Num_channels, num_overlays and num_dsilinks is not used anymore.
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I00340680e9748f6661da148cd7fa3b48d1bb37fe
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33968
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Hardware version is not needed anymore, since the probe
handles all specific properties that are hardware version
dependant.
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: I198c6af00ca1dbe39b269a4f8e17992b773a4fd5
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33323
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
This MCDE version is used in db5500 v1
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ib5a4ca054661f06bd3541021b1404f2c000010bc
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33322
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
This MCDE version is used in db8500 v1.
ST-Ericsson ID: 362765
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie5039e8d2bb838c900f6b14c18cce097f57a393d
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33321
Reviewed-by: QATOOLS
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Shift the rotation buffer address by 8k to free space for dma lcla area.
Do that for all displays.
ST-Ericsson ID: 364165
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I4bc5b72f6d198f26c7b48572cb3843d18c6b8553
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34168
Reviewed-by: Sylvain BARGE <sylvain.barge@stericsson.com>
Tested-by: Sylvain BARGE <sylvain.barge@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
HDMI AV8100 fw is updated to ver 0_3_0.
Supports chip cut version 3.0.
Fixes a TVout bug.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
mach-ux500: mcde: Change pixel format to RGB565 to make mali graphics work.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
|
|
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ie67744bebf8d5b7049d055077814460959f86172
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33801
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
mcde_get_main_display is not used in the kernel.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes driver specific fields from platform_data
in sony display driver.
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2d8a74716de1b8972ab1b5a145e7c1e66896de3d
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32719
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes sony display driver specific data from board-xxx-mcde.c
ST-Ericsson ID: 321190
ST-Ericsson Linux Next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Some driver data that are located in the board file should be
filled in by the display driver instead
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I564462d9806cfde90de25ff436e0d4946682ef23
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32595
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I606e9f3df286e7f8cd383e6840561ab9742d612c
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33680
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Generic suspend/resume should not be enabled on Android
since Android implement power management in early suspend.
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I35b5e004d48a4be8e98913be8b3ed4abbf48f9a0
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33727
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Port->mode should be used to determine if DSI Command
or DSI Video mode is used.
ST-Ericsson ID: 365544
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: I96513fd3cbeed566b8827fe796e69bc0f38d049a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33040
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: QABUILD
|
|
If an DCS read command is sent to the panel.
The panel can aknowledge the command with an error.
In this case the read command is resent to the panel.
ST-Ericsson ID: 321190
ST-Ericsson Linux Next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7c2d472cbf7acb9cbf880d162f3e20ab07c86398
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32594
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Remove use of MCDE generic DSI driver in favor of the
real Samsung S6D16D0 driver to reduce the amount of code
in mop500 board config.
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Idecde46fba388789403fea63210e81ed10cb75db
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33264
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If6b3aef296838134634f107b227c43b1cff90c5e
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33448
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
|
|
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Icb611dd8a6a73fca23f56841f587db97f3400f4c
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33263
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: QABUILD
|
|
Most suspend/resume implementations are the same. This adds
default implementation using display device set_power_mode.
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4dcead9f8e00363e67e73f6658828ead01c53694
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32867
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
|
|
Prepare for update was only used for partial updates and
partial update is no longer supported (and never worked).
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: If927e73805c2bba873b477a20be3ee5a94ac77cd
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32866
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
|
|
On the UIB8500R3 a Sony ACX424akp panel is used.
The UIB will be detected dynamically and use the
correct display driver.
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I9157e1d76334b665b37e871b1efe10c3415cc492
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/31952
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Add debugfs support for enabling frame rate logging to dmesg and
getting latest fps metric.
ST-Ericsson ID: 364378
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I29ce236ef09049eee69ac2b93f28f548d75418d8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33092
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
The color convertion matrix for rgb->denc is incorrect.
ST-Ericsson ID: 339717
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I34360ac40feb3886e235d8f7e0a622327114241f
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33152
|
|
fix compilation errors when HDMI_FB_AUTO_CREATE
is not set for db5500
ST-Ericsson ID: 365167
ST-Ericsson Linux next: Not tested, ER 282779
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I3d1b79b350c2672671a4d71b11a3103ec603d6de
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32193
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Avoid powerdown when fw failed.
ST-Ericsson ID: 364550
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I0386a2e8f3ce8d84ca30e7cd3c81df19a43a47ab
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32559
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
The calculation of a max counter is corrected.
ST-Ericsson ID: 364552
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4505ede69b1f1b36e27307db02f9ab2778c97341
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32463
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
New chip cut version 3.0 is detected.
ST-Ericsson ID: 364509
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ieee8066728ff57d244c349bc470d743196c372a7
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32432
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Add debugfs support for enabling frame rate logging to dmesg and
getting latest fps metric.
ST-Ericsson ID: 364378
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8d6f1447fb386b7b4d96750652602a5b9b1e8b0c
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32397
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Per PERSSON <per.xb.persson@stericsson.com>
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Remove unessesary delay for av8100 during startup.
Snowball have access to the clock for av8100 from the
start so no need to wait a long time in vain.
Change-Id: I383d9e3cb4e48c511ca869fb3b680937326959da
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35356
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
To make startup a little faster dont probe for uib
on snowball.
Change-Id: I4fa592dfbb924fb84f0f3f80675ab0229527615e
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35353
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Include av8100.fw in the kernel when CONFIG_AV8100 is enabled.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
Change-Id: Ie8a7c4b087858451bd75e04532f9a5399a69ba37
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33810
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Since no hardware colormaps are available with the framebuffer,
change the framebuffer from TRUECOLOR to DIRECTCOLOR, which
implies that we should use a pseudocolor palette for applications
that require color map functionality.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
Change-Id: I7a5126db319a3d77077a39f552aff86ea3532374
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33809
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
When a blanking call is made with FB_BLANK_NORMAL, exit without
powering down mcde hardware.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
Change-Id: I7414c38cd793170b31d5508bfe05f6968104f49a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33808
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Make id build even without
CONFIG_MCDE_DISPLAY_HDMI_FB_AUTO_CREATE
Change-Id: I831fba4be5c12fd44f1228ac01ae943dcc17a911
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Change-Id: Ia0e4f9ba5df5fe369df61dc1b843811990834e09
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
This patch ensures that av8100 firmware download is completed before
proceeding with commands that require fw.
ST-Ericsson ID: 364550
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I0ee7005874bd43bfe1b557c05bdb12e2a9ebad1d
Signed-off-by: Per Persson <per.xb.persson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32469
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|