summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-10tokenring/3c359.c:xl_init() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x361ef1): Section mismatch: reference to .init.text:xl_init (between 'xl_probe' and 'xl_hw_reset') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sis900_mii_probe() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x298170): Section mismatch: reference to .init.text:sis900_mii_probe (between 'sis900_probe' and 'sis900_default_phy') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Fix typo in drivers/net/s2io.cRolf Eike Beer
Introduced in d796fdb708fc5b10112934cba43e832c36ce4923. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10PCMCIA: add Socket Ethernet card into pcnet_csMarcin Juszkiewicz
One card submitted by Ångström user. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10spidernet: improve interrupt handlingIshizaki Kou
We intend this patch to improve spidernet interrupt handling to be more strict. We had following problem and this patch solves it. -when CONFIG_DEBUG_SHIRQ=y, request_irq() calls handler(). -when spider_net_open() is called, it calls request_irq() which calls spider_net_interrupt(). -if some specific interrupt bit is set at this timing, it calls netif_rx_schedule() and spider_net_poll() is scheduled. -spider_net_open() calls netif_poll_enable() which clears the bit __LINK_STATE_RX_SCHED. -when spider_net_poll() is called, it calls netif_rx_complete() which causes BUG_ON() because __LINK_STATE_RX_SCHED is not set. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-103cSOHO100-TX needs EXTRA_PREAMBLESteffen Klassert
The 3cSOHO100-TX needs a mdio_sync() before mdio_read() to read the MII transceiver registers properly. Adding EXTRA_PREAMBLE to drv_flags of the 3cSOHO100-TX will force this. This problem exists already for years (I checked back to 2.6.8). Setting duplex for the 3cSOHO100-TX was more or less a random process. Till 2.6.15 it was more likely that the diver ends up in half duplex mode, after the code change in 2.6.16 it was more likely to end up in full duplex mode. I wonder why nobody noticed this earier. Hopefully addresses Bug 7454 3c59x (3cSOHO100-TX Hurricane) slow network bug http://bugzilla.kernel.org/show_bug.cgi?id=7454 and Bug 3654 3cSOHO100-TX: No MII transceiver present http://bugzilla.kernel.org/show_bug.cgi?id=3654 Cc: Jonas Sandberg <jonassa@gmail.com> Cc: Jon Sanchez <bugs@niluje.net> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Use is_power_of_2() in myri10ge/myri10ge.cvignesh babu
Replace (n & (n-1)) with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Cc: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10use is_power_of_2() in cxgb3/cxgb3_main.cvignesh babu
Replace (n & (n-1)) with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atari_pamsnet.c: old declaration ritchie style fixYoann Padioleau
Use consistent function declaration style. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: 1.16 versionStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: remove some leftover debug messagesStephen Hemminger
Eliminate extra debug messages Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: use upper_32_bits() macroStephen Hemminger
Use upper_32_bits() inline Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: use roundup() macroStephen Hemminger
Use roundup() macro to size receive buffer. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: check drop truncated packetsStephen Hemminger
If packet larger than MTU is received, the driver uses hardware to truncate the packet. Use the status registers to catch/drop them. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: add support for read/write of EEPROMStephen Hemminger
Add get/set eeprom support for sky2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: unmark as EXPERIMENTALStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: receive fillStephen Hemminger
Simplify receive buffer refill logic. Rather than trying to update incrementally; do receive ring refill at end of receive processing. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: check for more work before leaving NAPIStephen Hemminger
This patch avoids generating another IRQ if more packets arrive while in the NAPI poll routine. Before marking device as finished, it rechecks that the status ring is empty. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: debug interfaceStephen Hemminger
Add an optional debug interface for displaying state of transmit/receive rings. Creates a file debugfs/sky2/ethX for each device that is up. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: carrier managementStephen Hemminger
Make sky2 handle carrier similar to other drivers, eliminate some possible races in carrier state transistions. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: restore workarounds for lost interruptsStephen Hemminger
This patch restores a couple of workarounds from 2.6.16: * restart transmit moderation timer in case it expires during IRQ routine * default to having 10 HZ watchdog timer. At this point it more important not to hang than to worry about the power cost. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Documentation/block/barrier.txt is not in sync with the actual code: - ↵Geert Uytterhoeven
blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Use list_for_each_entry() instead of list_for_each() in the block deviceMatthias Kaehlcke
elevator Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",Jan Engelhardt
so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10block/Kconfig already has its own "menuconfig" so remove theseJan Engelhardt
"menu, endmenu" that did not get cleaned up in the block patch [ http://lkml.org/lkml/2007/4/10/251 ] Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Use menuconfigs instead of menus, so the whole menu can be disabled at onceJan Engelhardt
instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10cfq-iosched: fix async queue behaviourJens Axboe
With the cfq_queue hash removal, we inadvertently got rid of the async queue sharing. This was not intentional, in fact CFQ purposely shares the async queue per priority level to get good merging for async writes. So put some logic in cfq_get_queue() to track the shared queues. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[GFS2] Accept old format NFS filehandlesSteven Whitehouse
On Tue, 2007-07-10 at 10:06 +0100, Christoph Hellwig wrote: > > -#define GFS2_LARGE_FH_SIZE 10 > > - > > -struct gfs2_fh_obj { > > - struct gfs2_inum_host this; > > - u32 imode; > > -}; > > +#define GFS2_LARGE_FH_SIZE 8 > > Because gfs2_decode_fh only accepts file handles with GFS2_LARGE_FH_SIZE > or GFS2_LARGE_FH_SIZE you don't accept filehandles sent out by and older > gfs version anymore. Stale filehandles because of a new kernel version > are a big no-no, so please add back code to handle the old filehandles > on the decode side. > This should fix that problem I think since its only relating to end of the fh we can just ignore that field in order to accept the older format. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Wendy Cheng <wcheng@redhat.com>
2007-07-10[BATTERY] ds2760 W1 slaveAnton Vorontsov
This is W1 slave for ds2760 chip, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] One Laptop Per Child power/battery driverDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10[BATTERY] Apple PMU driverDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10[BATTERY] 1-Wire ds2760 chip battery driverAnton Vorontsov
This is driver for batteries with ds2760 chip inside, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] APM emulation driver for class batteriesAnton Vorontsov
Signed-off-by: Eugeny Boger <eugenyboger@dgap.mipt.ru> Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] pda_power platform driverAnton Vorontsov
Common power driver for PDAs and phones with one or two external power supplies (AC/USB) connected to main and backup batteries, and optional builtin charger. It's used to stop logic duplication through different embedded devices. So, power supply *logic* is here. pda_power register power supplies, and will take care about notifying batteries about power changes through external power interface. Currently, power consumption legal limits (including USB power consumption) should be handled by platform code, inside set_charge function. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: Roman Moravcik <roman.moravcik@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] Universal power supply class (was: battery class)Anton Vorontsov
This class is result of "external power" and "battery" classes merge, as suggested by David Woodhouse. He also implemented uevent support. Here how userspace seeing it now: # ls /sys/class/power\ supply/ ac main-battery usb # cat /sys/class/power\ supply/ac/type AC # cat /sys/class/power\ supply/usb/type USB # cat /sys/class/power\ supply/main-battery/type Battery # cat /sys/class/power\ supply/ac/online 1 # cat /sys/class/power\ supply/usb/online 0 # cat /sys/class/power\ supply/main-battery/status Charging # cat /sys/class/leds/h5400\:red-left/trigger none h5400-radio timer hwtimer ac-online usb-online main-battery-charging-or-full [main-battery-charging] main-battery-full Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-10[S390] vmlogrdr function annotation.Christian Borntraeger
Use __init and __exit for vmlogrdr. Both functions are only referenced by the module_init exit macros, so this change should be fine. Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] s390: rename CPU_IDLE to S390_CPU_IDLEHeiko Carstens
sched-cfs-v2.6.22-git-v18.patch introduces CPU_IDLE in sched.h. This conflict with the already existing define in include/asm-s390/processor.h Just rename the s390 defines, since they will go away as soon as we support CONFIG_NO_HZ instead of our own CONFIG_NO_IDLE_HZ. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] cio: Remove prototype for non-existing function cmf_reset().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcrypt: fix request timeout handlingRalph Wuerthner
Under very high load zcrypt requests may timeout while waiting on the request queue. Modify zcrypt that timeouts are based on crypto adapter responses. A timeout occurs only if a crypto adapter does not respond within a given time frame to sumitted requests. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] system call optimization.Martin Schwidefsky
After the in-kernel system call has been remove the system call path can be optimized. The problem state bit of the old psw is always set between system_call and sysc_do_svc. SAVE_ALL_SVC uses this information to avoid two instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILEHeiko Carstens
drivers/s390/block/dasd_proc.c:33: warning: 'dasd_get_user_string' defined but not used drivers/s390/block/dasd_proc.c:172: warning: 'dasd_statistics_array' defined but not used Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] Remove volatile from atomic_tHeiko Carstens
Follow i386/x86_64 and remove 'volatile' from atomic_t. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] Bogomips calculation for 64 bit.Martin Schwidefsky
The bogomips calculation triggered via reading from /proc/cpuinfo can return incorrect values if the qrnnd assembly is called with a pointer in %r2 with any of the upper 32 bits set. Fix this by using 64 bit division / remainder operation provided by gcc instead of calling the assembly. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] smp: Merge smp_count_cpus() and smp_get_save_areas().Heiko Carstens
Merge smp_count_cpus() and smp_get_save_areas() so we save a loop over all potentially present cpus. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcore: Fix __user annotation.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] fixed cdl-format detection.Stefan Haberland
CDL formated DASDs are now detected correctly even if no VOL1 label is on the disk. This prevents possible loss of data. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: Test facility list before executing a service call.Heiko Carstens
Check if a command is available before executing. Saves some superfluous service calls that won't succeed anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: introduce some new interfaces.Heiko Carstens
Introduce some new interfaces so that random subsystems don't have to mess around with sclp internal structures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] Fixed comment typo.Ralph Wuerthner
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-04 10:24:09 +0000