Age | Commit message (Collapse) | Author |
|
The framebuffer console causes some problems with 3d graphics.
Disable it until the root cause has been found.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Update according to new u8500_defconfig.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Signed-off-by: John Rigby <john.rigby@linaro.org>
|
|
HDMI AV8100 fw is updated to ver 0_3_0.
Supports chip cut version 3.0.
Fixes a TVout bug.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
mach-ux500: mcde: Change pixel format to RGB565 to make mali graphics work.
Signed-off-by: John Fredriksson <john.xj.fredriksson@stericsson.com>
|
|
Currently musb core PM ops does save and restore of context
The platform can enter CPU idle before the platform or
runtime suspend is called.But musb core PM ops is not aware
of CPU idle. and thus it saves and restores some junk context
Since junk context is restored there is instability in usb
functions.
ux500 USB platform file handles the save and restore properly
during cable connect and disconnent.So we don't require handling
of context save and restore in musb core and hence not registering
musb core PM ops.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 370868,372121
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ie784c131792b686564561dc9b4bb262042e48504
Signed-off-by: rajaram <rajaram.ragupathy@stericsson.com>
|
|
Snowball V7 and above the accelerometer changed i2c address
and there is now way to detect that in runtime.
So between V7 and V10 we need to probe for the right address.
Change-Id: I39528ca40952a8a868b7aff6c3abd7668420850d
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
Change-Id: I39f57da20017ff7e963d0001a99dd426e12c77d0
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35833
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Add the lps001wp as a consumer of VAUX1, the
device name is a little bad maybe have to be fixed later on.
Change-Id: Ie38b86383d5d1eac5862e3f5d999639d407702f3
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/35832
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
|
|
Change-Id: If872084fce0c37126f9196a70c0f76db1c4cf37c
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
ST-Ericsson ID: 361885
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic914e764ee4816fbfcfbba5129426e2ba51a88ab
Signed-off-by: Jayarami Reddy <jayarami.reddy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33780
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
|
|
Enable boot partitions to be power and permanently locked via
a sysfs ro_lock node.
ST-Ericsson ID: 344197
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I5534c12b0c1867d562e27a2fb2012624ad3009b4
Signed-off-by: John Beckett <john.beckett@stericsson.com>
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33117
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ie67744bebf8d5b7049d055077814460959f86172
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33801
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Auto sync for command mode displays are no
longer used and should be implemented in fbdev
if needed.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I860d9221dc79d6e5acd53c514d90a8eac57fb18a
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33800
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
With this patch it is possible to set
baud rate 3.25 Mbps on CG2900 UART.
ST-Ericsson ID: 364789
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: Not tested, 364789
Signed-off-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Change-Id: If54af597b949038e9ef4c05d80c9235666e127a4
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32689
Reviewed-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Tested-by: Lukasz RYMANOWSKI <lukasz.rymanowski@stericsson.com>
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
mcde_get_main_display is not used in the kernel.
ST-Ericsson ID: 365249
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I86b947e1273ba0a7340cee06cfa1d7d732d064b8
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33784
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I4724b322f5fba1b4fff49abb525380b98e8801a5
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/34062
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
The cyttsp driver dont have proper ifdefs around
EARLYSUSPEND code.
Change-Id: I03ae51f6b2593ce5cfa601158477eeb485e9f82b
Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
|
|
During APE-Modem communication, for some reasson if software or hardware
fails, instead of calling kernel function BUG() and halting the system
making it no more useful until reboot, initiate a MSR.
ST-Ericsson Linux next: NA
ST-Ericsson ID: 366150
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I59e93b338c3242b506be7775487be065421022b8
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33416
Reviewed-by: Bibek BASU <bibek.basu@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Magnus TEMPLING <magnus.templing@stericsson.com>
Reviewed-by: Rickard EVERTSSON <rickard.evertsson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
Now the battery capacity calculations and the power_supply framework
is updated with the new status when battery has been fully charged
before clients polling the capacity sysfs node are being notified.
ST-Ericsson ID: 358829
ST-Ericsson Linux next: Not tested
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Icd827863bc694e44495487f8536e95ab5fe0714f
Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33880
Reviewed-by: QABUILD
Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com>
|
|
This enables audio in u5500_defconfig
ST-Ericsson ID: 362962
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I32d8a1b130fcbd962551f3f4d1aa22b7d414062e
Signed-off-by: Shyam Krishnan M <shyam.moni@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33805
Reviewed-by: QABUILD
Reviewed-by: Ganesh V <ganesh.v@stericsson.com>
Tested-by: Ganesh V <ganesh.v@stericsson.com>
Reviewed-by: Basavaprabhu BANDI <basavaprabhu.bandi@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
This adds the correct supply name for the
Cypress Touchscreen controller
ST-Ericsson ID: 366971
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I7b1cc31220059edf946ead080a9ad1321d6277f2
Signed-off-by: Avinash A <Avinash.a@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33832
Reviewed-by: Avinash A <avinash.a@stericsson.com>
Tested-by: Avinash A <avinash.a@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
pins.h didn't include <plat/pincfg.h> eventhough it used stuff
from there.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I120b2814118aa43323c95f429793a135af6a68d6
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33424
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
PIN_SLPM_WAKEUP_ENABLE/DISABLE do something completely different
than the name says.
ST-Ericsson Linux next: -
ST-Ericsson ID: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ib334d2772fa21f58ee84f22dddf34830300a4f86
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33865
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
Change-Id: Ib874ec36ebd2847aa3ab25fca119a82000ed6918
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33027
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
Reviewed-by: QABUILD
|
|
Due to problem with multiple insertion of SD card in DMA mode
the dma support for SD cad is disabled temporarily.
ST-Ericsson Id: ER 365282
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: Ic4bf04f5b3a7d4fe8c2e1d18be11308f5e7eb108
Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33785
Reviewed-by: QABUILD
Reviewed-by: Preetham-rao K <preetham.rao@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
If the esram is used for LCLA region, this patch will hold the regulator
during when the DMA driver is active. The regulator will be disabled on
a suspend and will be enabled again on resume.
The dma driver initcall has been moved to subsys_initcall(), to ensure
that the regulators are available before we do a regulator_get().
ST-Ericsson ID: 364165
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ieee3c329c26e9fb43f282716fa57810211f79d85
Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33434
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Idcf924f1e29b24f31349ee602cb86da1fa9e9065
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33681
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes driver specific fields from platform_data
in sony display driver.
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I2d8a74716de1b8972ab1b5a145e7c1e66896de3d
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32719
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Removes sony display driver specific data from board-xxx-mcde.c
ST-Ericsson ID: 321190
ST-Ericsson Linux Next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Change-Id: Ice61906fb359edf5ebd665e066c4b537312cb94b
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32718
Reviewed-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Tested-by: Jimmy RUBIN <jimmy.rubin@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
Some driver data that are located in the board file should be
filled in by the display driver instead
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I564462d9806cfde90de25ff436e0d4946682ef23
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32595
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
ST-Ericsson ID: 321190
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I606e9f3df286e7f8cd383e6840561ab9742d612c
Signed-off-by: Jimmy Rubin <jimmy.rubin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33680
Reviewed-by: QABUILD
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
|
|
performance.c fails to compile if CONFIG_MMC_BLOCK is not defined, so
place the code that depends on the MMC subsystem within #ifdefs.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ieb4d560ad1c5089cad2da5ce0f7869dafd1acfe1
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33686
Reviewed-by: QABUILD
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
So that modem logging over UART does not stop when
IOFORCE is enabled.
ST-Ericsson ID: 361345
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I179ebb419b21f84cc047dc06246bc0bfe443fb48
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33758
Reviewed-by: QABUILD
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
|
|
collect the modem type info from bootargs and expose
over sysfs
ST-Ericsson ID: 337490
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ia705e168568a0be08409af792a04091d4e96a50a
Signed-off-by: Bibek Basu <bibek.basu@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32480
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
lcpa and lcla are written often and the cache_sync()
overhead in writel is costly, especially for wlan where
every single network packet (in RX mode) corresponds
to a separate DMA transfer.
ST-Ericsson Linux next: TESTED
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8339704de95f2355d22681ac4bd542795770fa89
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33009
Reviewed-by: Narayanan GOPALAKRISHNAN <narayanan.gopalakrishnan@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
|
|
HSI paramters need to be updated to fit with M7400 HSI config.
ST-Ericsson ID: 364664
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I06f7d62fb82212b8b864a8b90bc00b328af215b7
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32766
Reviewed-by: Christophe GUIBOUT <christophe.guibout@stericsson.com>
Tested-by: Christophe GUIBOUT <christophe.guibout@stericsson.com>
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
reboot_reason_code() maps unrecognized strings to SW_RESET_NO_ARGUMENT
instead of SW_RESET_CRASH.
ST-Ericsson ID: 365831
Change-Id: I7b364db65a54b7bde3c5394ff7c2e921c4bb1692
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33723
Reviewed-by: QABUILD
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
Generic suspend/resume should not be enabled on Android
since Android implement power management in early suspend.
ST-Ericsson ID: 365249
ST-Ericsson Linux next: NA
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I35b5e004d48a4be8e98913be8b3ed4abbf48f9a0
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33727
Reviewed-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Tested-by: Marcus LORENTZON <marcus.xm.lorentzon@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
EXT_CSD[248] includes the default maximum timeout for CMD6.
This field is added at eMMC4.5 Spec. And it can be used for default
timeout except for some operations which don't define the timeout
(i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Change-Id: I1761bbadb1d35d58c5de3f459808f4cd2559da99
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33717
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
UX500_PRCMU_QOS_POWER has switched names to DBX500_PRCMU_QOS_POWER.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: I2d9d71f2f76f264916ded2d5251747eff516cd63
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33685
Reviewed-by: QABUILD
Reviewed-by: Per FORLIN <per.forlin@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
The system wake up latency from sleep adds an extra
overhead when running wlan in DMA mode. This
is not the case for PIO since the CPU usage
prevents the system from going to sleep.
ST-Ericsson ID: 357764
ST-Ericsson FOSS-OUT ID: Trivial
ST-Ericsson Linux next: NA
Change-Id: Ib3ac10da61ca9f3d9db4956a29fb694bd2c416cc
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33008
Reviewed-by: QABUILD
Reviewed-by: Johan RUDHOLM <johan.rudholm@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|
|
PRCMU has been moved, so fix Kconfig and header include path
ST-Ericsson ID: 364370
ST-Ericsson Linux next: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I052cf03afa4481e1267c07acf2d16401fac6abc2
Signed-off-by: Chris Kimber <chris.kimber@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33124
Reviewed-by: QABUILD
Reviewed-by: Duncan PATERSON <duncan.paterson@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
When a value other than 0 is written to either the _min or _max
attributes, automatically start the PRCMU monitoring.
Also at driver init start monitoring the critical temperature
to prevent overheating.
ST-Ericsson ID: 364370
ST-Ericsson Linux next: -
ST-Ericsson FOSS-OUT ID: Trivial
Change-Id: I8fefbf30eeb07d6caf4ee73af487b948fbd2fe7e
Signed-off-by: Chris Kimber <chris.kimber@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/32404
Reviewed-by: QABUILD
Reviewed-by: Duncan PATERSON <duncan.paterson@stericsson.com>
Reviewed-by: Andrew LYNN <andrew.lynn@stericsson.com>
|
|
This patch fixes memory leak during driver initialization because
pmu gpio was never freed in case of failure in snowball initialization.
ST-Ericsson ID: 365769
ST-Ericcson FOSS-OUT-ID: Trivial
ST-Ericsson Linux next: 365769
Change-Id: Ic6ed3e172ca46ccf0da443272845de984f0f5706
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33254
Reviewed-by: QABUILD
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
|
|
The patch "mmc: core: move ->request() call from atomic context",
is the reason to why this change is possible. This simplifies the
error handling code execution path quite a lot and potentially also
fixes some error handling hang problems.
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Change-Id: Icc2454053d692d8d19d81e2046ed5939d2aac915
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33713
Tested-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Reviewed-by: Ulf HANSSON <ulf.hansson@stericsson.com>
|
|
This patch adds dynamic selection of machine configuration and
merges the board and device configuration files.
ST-Ericsson ID: 365671
ST-Ericcson FOSS-OUT-ID: Trivial
ST-Ericsson Linux next: 365671
Change-Id: I58601115bb8234ab203ac8cd37711563eceb4d17
Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com>
Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/33130
Reviewed-by: QABUILD
Reviewed-by: Par-Gunnar HJALMDAHL <par-gunnar.p.hjalmdahl@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
|