summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (11138): get_dvb_firmware: add support for downloading the cx2584x ↵Mauro Carvalho Chehab
firmware for pvrusb2 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11137): get_dvb_firmware: add cx23885 firmwaresMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11136): get_dvb_firmware: Add download code for cx18 firmwaresMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11125): fix mispelled Hauppauge in HD PVR and PVR USB2 driver commentsJanne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11124): Add support for ProVideo PV-183 to bttvAlan McIvor
Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11120): cafe_ccic: stick in a comment with a request for test resultsHans Verkuil
Due to lack of hardware this conversion to v4l2_device/v4l2_subdev is untested. If all goes well I should be able to test it in about a month, but just in case I can't manage that it should be made clear in the code that this isn't tested. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11118): cafe_ccic: replace debugfs with g/s_register ioctls.Hans Verkuil
Using VIDIOC_DBG_S/G_REGISTER is the standard way of reading/writing register for advanced debugging under v4l2. In addition, using this means that the cafe_ccic driver doesn't need to have knowledge about the used sensor: the debug ioctl can be passed on to the sensor if it isn't for the host. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11117): ov7670: add support to get/set registersHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11116): ov7670: cleanup and remove legacy code.Hans Verkuil
v4l2-i2c-drv-legacy.h and ov7670_command are no longer needed after the cafe driver is converted to use v4l2_subdev. Rather than using a large ov7670_control array, just call the handlers via a simple switch and use v4l2_ctrl_query_fill() to handle queryctrl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11115): cafe_ccic: use v4l2_subdev to talk to the ov7670 sensor.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11114): cafe_ccic: convert to v4l2_device.Hans Verkuil
Convert this driver to v4l2_device and removed the unnecessary cafe_dev_list. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11113): ov7670: convert to v4l2_subdevHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11112): v4l2-subdev: add support for TRY_FMT, ENUM_FMT and G/S_PARM.Hans Verkuil
These ops are used by the ov7670 driver, so these need to be added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11111a): MAINTAINERS: Drop references to deprecated video4linux listJean Delvare
Mailing list video4linux-list@redhat.com is deprecated, so drop references to it in MAINTAINERS. MAINTAINERS | 2 -- Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11111): dvb_dummy_fe: Fix compilation breakageMauro Carvalho Chehab
As reported by Randy Dunlap <randy.dunlap@oracle.com>: ERROR: "dvb_dummy_fe_ofdm_attach" [drivers/media/video/cx231xx/cx231xx-dvb.ko] undefined! This happens since cx231xx DVB part still misses the frontend modules. So, the dummy frontend were used for development. The proper fix is to implement the DVB modules there, as they will be required. While this won't happen, lets allow the compilation with or without the dummy FE testing module. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11110): au8522/au0828: Fix Kconfig dependenciesMauro Carvalho Chehab
au8522 is now dependent of V4L2, as reported by Randy Dunlap <randy.dunlap@oracle.com>: au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev' au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client' au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init' Cc: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11109): au0828: Fix compilation when VIDEO_ADV_DEBUG = nMauro Carvalho Chehab
As reported by Kyle McMartin and Randy Dunlap: drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register' drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register' This patch properly implements those two API ioctls only when debug is enabled. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11108): get_dvb_firmware: Add option to download firmware for cx231xxMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11106): gspca - ov534: New sensor ov965x and re-enable the webcam ↵Jean-Francois Moine
06f8:3003 Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11105): gspca - ov534: Adjust the packet scan functionJean-Francois Moine
- change max payload size to 2040 bytes (was 2048) - optimize Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11104): gspca - ov534: Bad frame pointer after adding the last packetJean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11103): gspca - main: May have isochronous transfers on altsetting 0Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11100): au8522: fix compilation warning.Hans Verkuil
normal_i2c and I2C_CLIENT_INSMOD are only necessary for kernels < 2.6.22. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11098): v4l2-common: remove incorrect MODULE testHans Verkuil
v4l2-common doesn't have to be a module for it to call request_module(). Just remove that test. Thanks-to: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11097): use video_ioctl2 as ioctl handler directlyJanne Grunau
The encoder commands ioctls are available in v4l2_ioctl_ops. Use them and get rid of the custom ioctl handler and use video_ioctl2. Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11096): V4L2 Driver for the Hauppauge HD PVR usb capture deviceJanne Grunau
The device encodes component video up to 1080i to a MPEG-TS stream with H.264 video and stereo AAC audio. Newer firmwares accept also AC3 (up to 5.1) audio over optical SPDIF without reencoding. Firmware upgrade is unimplemeted but rather unimportant since the firmware sits on a flash chip. The I2C adapter to drive the integrated infrared receiver/sender is currently disabled due to a conflict with cx18-based devices. Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11095): adds V4L2_CID_SHARPNESS to v4l2_ctrl_query_fill()Janne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11092): cx18: Optimize processing of VBI buffers from the capture unitAndy Walls
Removed some unnecessary memcpy()'s by reworking the compress_*_vbi_buf() functions. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11091): cx18, ivtv: Ensure endianess for linemasks in VBI embedded ↵Andy Walls
in MPEG stream The sliced VBI payloads that cx18 and ivtv would insert in the MPEG stream did not have consistent endianess for the linemasks in the payload (a big endian platform would write them out big endian). This change ensures the linemasks are always stored as little-endian in the MPEG stream to ensure cross platform consistency in parsing the generated MPEG stream. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11089): au8522: finish conversion to v4l2_device/subdevDevin Heitmueller
Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the au8522_command and replace v4l2-i2c-drv-legacy.h with v4l2-i2c-drv.h Thanks to Hans Verkuil <hverkuil@xs4all.nl> for reviewing the au8522 analog support. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11088): au0828: finish videodev/subdev conversionDevin Heitmueller
Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated attach_inform/detach_inform routines, and convert over the i2c calls to subdev calls. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the au0828 analog support. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11086): au0828: rename macro for currently non-function VBI supportDevin Heitmueller
The VBI support or the au0828 has the framework written but it does not yet work. Rename the macro per Mauro's request. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11085): au0828/au8522: Codingstyle fixesDevin Heitmueller
Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle issues. This patch does not make *any* functional change to the code. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11084): au0828: add entry for undefined input typeDevin Heitmueller
For the sake of completeness, include the "undefined" input type enumeration, even though there is no path that can actually call it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11083): au0828: remove some unneeded bracesDevin Heitmueller
There were some braces left behind from when there was more code in the block. Remove it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11082): au0828: remove memset calls in v4l2 routines.Devin Heitmueller
The userland callers are responsible for clearing the output buffers, so remove the unneeded memset calls. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11081): au0828: make sure v4l2_device name is uniqueDevin Heitmueller
Make sure newly created v4l2 devices have a unique name, modeling the logic after the cx18 driver. Thanks to Andy Walls <awalls@radix.net> for pointing out the issue. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11080): au0828: Convert to use v4l2_device/subdev frameworkDevin Heitmueller
Convert over to using the new subdev framework for the au0828 bridge. This includes using the new i2c probing mechanism. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11079): au0828: fix panic on disconnect if analog initialization failedDevin Heitmueller
If the analog initialization failed to create the video device, we never actually add the entry to the au0828_devlist. Therefore a panic occurs when unregistering the analog subsystem. Make it so we only remove the entry from the list if we added it to the list in the first place. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11078): au0828: properly handle non-existent analog inputsDevin Heitmueller
It is not valid to look for dev->board.input == NULL to detect an undefined analog configuration section, since it is a member of the struct and not a pointer (hence it will *always* be non-NULL). Do the check based on whether the first input is actually a valid input type instead. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11077): au0828: properly handle missing analog USB endpointDevin Heitmueller
Move the setup of the analog isoc handler into au0828-video.c, so it does not occur if there is not an .input section defined for the board. Also fixes a case where if there is an input section but the board does not actually have analog support, the digital support will continue to work as expected. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11076): au0828: make g_chip_ident call work properlyDevin Heitmueller
Make the g_chip_ident call work for the au0828/au8522. Discovered when testing with the v4l2_compliance tool Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix merge conflict, due to a path change for analog demod] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11075): au0828: make register debug lines easier to readDevin Heitmueller
Make it a little easier to read the debug messages for register read/write operations Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11074): au0828: fix i2c enumeration bugDevin Heitmueller
There was a bug where enumerating the i2c for devices would result in false positives. The root of the issue was the scanning was using SMBUS_QUICK messages, which are zero length write requests (which our i2c adapter implementation didn't handle). Because we never strobed any bytes onto the bus, the status register would still contain the value from the previous request. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11073): au0828: disable VBI code since it doesn't yet workDevin Heitmueller
Since the VBI support is not yet working for the au0828, don't advertise the capability or create the /dev/vbi device. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11072): au0828: advertise only NTSC-M (as opposed to all NTSC ↵Devin Heitmueller
standards) We don't now how to make any variant of NTSC work other than NTSC-M, so don't advertise that we support the other variants. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11071): tveeprom: add the xc5000 tuner to the tveeprom definitionDevin Heitmueller
Prior to now, we never relied on the Hauppauge tveeprom to identify which tuner is associated with the board. Now that the HVR-950q determines what the tuner is based on the eeprom, set the tuner ID appropriately. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the tveeprom organization. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11070): au0828: Rework the way the analog video binding occursDevin Heitmueller
Rework the way boards are managed so that we can change the board description based on the Hauppauge eeprom (modeled after cx88-cards.c). Also, make sure that we don't load the analog stack if there are no analog inputs defined in the board profile. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the various ways different Hauppauge boards can be configured. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11069): au8522: add mutex protecting use of hybrid stateDevin Heitmueller
Access using the hybrid state framework requires the list to be protected by a mutex. Thanks to Michael Krufky <mkrufky@linuxtv.org> for reporting this during a code review. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 12:25:29 +0000