summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2007-05-08ARM: OMAP: Sync core code with linux-omapTony Lindgren
This patch syncs omap specific core code with linux-omap. Most of the changes are needed to fix bitrot caused by driver updates in linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: h4 must have blinky leds!!David Brownell
This adds generic support for the "debug board" LEDs used by most of TI's OMAP reference boards, and board-specific support for the H4. It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2. Those should be able to switch easily to this version, and clean up some of the omap1-specific code. In addition to H4 support, one key improvement is supporting not just the "old" ARM debug LED API (with timer and idle LEDs, plus four that can be handy for kernel debugging), but it also supports the "new" generic LED API (most useful for usermode stuff IMO). Either or both APIs can be enabled. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: FB: add controller platform dataImre Deak
Add controller platform data Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: Add function to print clock usecountsJuha Yrjola
Useful for debugging power management code. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: Add DMA IRQ sanity checksJuha Yrjola
Add DMA IRQ sanity checks Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: gpio init section cleanupsDavid Brownell
Minor GPIO cleanups: remove needless #include, and omap_gpio_init() should be __init, as well as all the board init code calling it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: fix OMAP1 mpuio suspend/resume oopsDavid Brownell
Fix oops in omap16xx mpuio suspend/resume code; field wasn't initialized Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: MPUIO wake updatesDavid Brownell
GPIO and MPUIO wake updates: - Hook MPUIOs into the irq wakeup framework too. This uses a platform device to update irq enables during system sleep states, instead of a sys_device, since the latter is no longer needed for such things. - Also forward enable/disable irq wake requests to the relevant GPIO controller, so the top level IRQ dispatcher can (eventually) handle these wakeup events automatically if more than one GPIO pin needs to be a wakeup event source. - Minor tweak to the 24xx non-wakeup gpio stuff: no need to check such read-only data under the spinlock. This assumes (maybe wrongly?) that only 16xx can do GPIO wakeup; without a 15xx I can't test such stuff. Also this expects the top level IRQ dispatcher to properly handle requests to enable/disable irq wake, which is currently known to be wrong: omap1 saves the flags but ignores them, omap2 doesn't even save it. (Wakeup events are, wrongly, hardwired in the relevant mach-omapX/pm.c file ...) So MPUIO irqs won't yet trigger system wakeup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: speed up gpio irq handlingDavid Brownell
Speedup and shrink GPIO irq handling code, by using a pointer that's available in the irq_chip structure instead of calling the get_gpio_bank() function. On OMAP1 this saves 44 words, most of which were in IRQ critical path methods. Hey, every few instructions help. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: plat-omap changes for 2430 SDPSyed Mohammed Khasim
This patch adds minimal OMAP2430 support to plat-omap files to get the kernel booting on 2430SDP. Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: gpio object shrinkage, cleanupDavid Brownell
More GPIO/IRQ cleanup: - compile-time removal of much useless code * mpuio support on non-OMAP1. * 15xx/730/24xx gpio support on 1610 * 15xx/730/16xx gpio support on 24xx * etc - remove all BUG() calls, which are always bad news ... replaced some with normal fault reports for that call, others with WARN_ON(1). - small mpuio bugfix: add missing set_type() method Oh, and fix a minor merge issue: inode->u.generic_ip is now gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: /sys/kernel/debug/omap_gpioDavid Brownell
Add some GPIO debug support: /sys/kernel/debug/omap_gpio dumps the state of all GPIOs that have been claimed, including basic IRQ info if relevant. Tested on 24xx, 16xx. Includes minor bugfixes: recording IRQ trigger mode (this should probably be a genirq patch), adding missing space to non-wakeup warning Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 siliconJuha Yrjola
Some GPIOs on OMAP2420 do not have wakeup capabilities. If these GPIOs are configured as IRQ sources, spurious interrupts will be generated each time the core domain enters retention. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05ARM: OMAP: Enable 24xx GPIO autoidlingJuha Yrjola
Enable 24xx GPIO autoidling Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] getuser.S and putuser.S don't need thread_info.h nor asm-offsets.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] ptrace: clean up single stepping supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] Remove needless linux/ptrace.h includesRussell King
Lots of places in arch/arm were needlessly including linux/ptrace.h, resumably because we used to pass a struct pt_regs to interrupt handlers. Now that we don't, all these ptrace.h includes are redundant. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] EBSA110: Add readsw/readsl/writesw/writeslRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] Add ability to dump exception stacks to kernel backtracesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-16[ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6Ben Dooks
Update defconfig to the latest kernel version and enable the h1940 LED driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-16[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-31[ARM] Export dma_channel_active()Russell King
dma_channel_active() is used by some modules and is part of our DMA API, so export it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-29[ARM] 4289/1: AT91: SAM9260 NAND flash timingAndrew Victor
Fix the NAND flash timings on the AT91SAM9260. The current timings lead to the detection of a number of bad blocks. These timings are now set the same as on the AT91SAM9263. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4278/1: configure pxa27x I2C SCL as "input" [ARM] 4272/1: Missing symbol h1940_pm_return fix [ARM] 4235/1: ns9xxx: declare the clock functions as "const" [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms) [ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs
2007-03-20[ARM] 4272/1: Missing symbol h1940_pm_return fixKrzysztof Helt
Added missing ifdefs, to make kernel linkable without the PM support. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4264/1: ldrex/strex syntax errors with recent compilers [ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc
2007-03-18[PATCH] gpio_direction_output-needs-an-initial-value fixDavid Brownell
Build fix: sa1100/generic.c should already have included <asm/gpio.h>, but it didn't ... causing a build problem with a recent patch. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-17[ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms)Dan Williams
An iq80219 is a board with an iq31244 layout and an 80219 processor. It breaks the current assumption that all 80219 processors run on ep80219 platforms. This patch adds the "force_ep80219" option to the kernel to override boot loaders that have passed in the iq31244 id, and adds the MACHINE_START definition for ep80219. [ patch assumes that EP80219 has been added to mach-types ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-17[ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqsGraeme Gregory
This patch corrects an error when demuxing the DMA irq's DMA1 was used as a base and this should have been DMA0. Without this fix we do not process DMA0 irq's and the system effectively locks up in a loop trying the process the irq it never can. Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-16[PATCH] gpio_direction_output() needs an initial valueDavid Brownell
It's been pointed out that output GPIOs should have an initial value, to avoid signal glitching ... among other things, it can be some time before a driver is ready. This patch corrects that oversight, fixing - documentation - platforms supporting the GPIO interface - users of that call (just one for now, others are pending) There's only one user of this call for now since most platforms are still using non-generic GPIO setup code, which in most cases already couples the initial value with its "set output mode" request. Note that most platforms are clear about the hardware letting the output value be set before the pin direction is changed, but the s3c241x docs are vague on that topic ... so those chips might not avoid the glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-13[ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fcRussell King
72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc inverted the sense for enabling hotplug CPU controls without reference to any other architecture other than i386, ia64 and PowerPC. This left everyone else without hotplug CPU control. Fix ARM for this brain damage. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.Pavel Pisa
Only System PLL clock source is selectable by CSCR_SYSTEM_SEL bit. MPU PLL is driven by 512*CLK32 for each case. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-12[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.Pavel Pisa
The minimal bus clock prescaler should be kept at value selected by the board / boot loader designer. Switching frequency above startup limit could lead to the external memory/devices misbehave. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2007-03-08[ARM] 4251/1: Fix sharpsl_pm dependencyRichard Purdie
The sharpsl_pm code depends on some symbols in the APM emulation code. Add the dependency for now until a better solution can be found. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08[ARM] 4249/1: Fix tosa compile failureRichard Purdie
Fix tosa compile failure from commit 32f3f49910c7e228839c1cd144dbed8da342703b Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08[ARM] 4247/1: Fix long name for cc9p9360devUwe Kleine-König
The Product Manager of the cc9p insist on using the correct product names. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-07ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent worksRichard Woodruff
This adds the delayed application attribute to the dss2 clock. DSS2 can't select the 48MHz APLL with properly with out validating the configuration as trigged by this flag. Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-07ARM: OMAP: Fix missing workqueue include in board-h2.cDirk Behme
ARM: OMAP: Fix missing #include <linux/workqueue.h> in board-h2.c resulting in In file included from arch/arm/mach-omap1/board-h2.c:40: include/asm/arch/irda.h:27: error: field 'gpio_expa' has incomplete type Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-07ARM: OMAP: Include missing headerTony Lindgren
Include missing header for do_div() Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-05[PATCH] add CONFIG_GENERIC_GPIODavid Brownell
Most drivers using GPIOs already know they are running on a system that supports the generic GPIO calls, because of other platform dependencies. But the generic GPIO-based LED and input button drivers can't know that. So this patch adds a Kconfig hook, GENERIC_GPIO, to mark the platforms where <asm/gpio.h> will do the right thing. Currently that's a bunch of ARMs, and AVR32; more are on the way. It also fixes a dependency bug for the gpio button input driver; it was wrong to start with, now it covers all platforms with GENERIC_GPIO. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: <raph@8d.com> Cc: <msvoboda@ra.rockwell.com> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-03[ARM] EBSA110: Work around build errorsRussell King
Work around EBSA110 build errors by selecting NO_IOPORT. EBSA110 can't support an IO port to MMIO mapping mechanism because the MMIO and IO port spaces have quite different and complex addressing requirements. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02Merge branch 'omap-fixes' of ↵Russell King
master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2007-03-02[ARM] 4239/1: S3C24XX: Update kconfig entries for PMBen Dooks
Update help text with location of documentation and duplicate the note on the speed of CRC Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] 4237/2: oprofile: Always allow backtraces on ARMRichard Purdie
Always allow backtrace when using oprofile on ARM, even if a PMU isn't present. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] Yet more asm/apm-emulation.h stuffRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02ARM: OMAP: Use linux/delay.h not asm/delay.hTony Lindgren
Use linux/delay.h not asm/delay.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: omap1510->15xx conversions needed for sx1Vladimir Ananiev
Convert 1510->15xx in generic omap code, so that sx1 can work. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Add missing includes to board-nokia770Dirk Behme
Add missing includes to board-nokia770 to make it compile again. Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-02ARM: OMAP: Workqueue changes for board-h4.cDirk Behme
Workqueue changes for board-h4.c Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 05:02:52 +0000