summaryrefslogtreecommitdiff
path: root/arch/blackfin
AgeCommit message (Collapse)Author
2010-10-26m68k{nommu}/blackfin : remove old assembler-only flags bit definitionsPhilippe De Muyter
Long ago, PT_TRACESYS_OFF and friends were introduced as hard defines to avoid straight constants in assembler parts of linux m68k. They are not used anymore, and were not updated to follow changes in linux kernel. Remove them. When similar constants are needed, they are now generated using asm-offsets.c. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Blackfin: fix inverted anomaly 05000481 logicMike Frysinger
No one uses these MMRs so we didn't notice when the anomaly handling logic was inverted. Reported-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECKMike Frysinger
This code was useful during early port development when our icache code wasn't solid, but that ship has sailed long ago, and no code calls this function anymore (irq_panic). So punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: ppi/spi/twi headers: add missing __BFP undefMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: update defconfigsMike Frysinger
- enable pm for ADI boards - drop security option as no one uses it - enable uninitialized mmap for everyone - disable wireless by default as no one uses it - disable cfq io sched as noop is fine Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: bfin_twi.h: start a common TWI headerMike Frysinger
Start one place for TWI definitions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25netdev: bfin_mac: push settings to platform resourcesSonic Zhang
Move all the pin settings out of the Kconfig and into the platform resources (MII vs RMII). This clean up also lets us push out the phy settings so that board porters may control the layout. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (47 commits) Blackfin: bfin_spi.h: add MMR peripheral layout Blackfin: bfin_ppi.h: start a common PPI/EPPI header Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs Blackfin: bf538: add missing SIC_RVECT define Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx Blackfin: bf54x: add missing SIC_RVECT definition Blackfin: H8606: move 8250 irqflags to platform resources Blackfin: glue XIP/ROM kernel kconfigs Blackfin: update sparse flags for latest upstream changes Blackfin: coreb: update ioctl numbers Blackfin: coreb: add gpl module license Blackfin: bf518-ezkit: add ssm2603 codec resources Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers Blackfin: tll6527m: new board port Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot Blackfin: merge kernel init memory back into main memory region Blackfin: gpio: add peripheral group check Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ Blackfin: add new cacheflush syscall Blackfin: bf548-ezkit: increase u-boot partition size ...
2010-10-22Blackfin: bfin_spi.h: add MMR peripheral layoutMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bfin_ppi.h: start a common PPI/EPPI headerMike Frysinger
Start unifying the PPI/EPPI peripheral structures in one place. This may be used by camera/video/fpga/high speed devices. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRsMike Frysinger
Also document the mailbox (channel) data array layout. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf538: add missing SIC_RVECT defineMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf561: rewrite SICA_xxx to just SIC_xxxMike Frysinger
This matches all the other Blackfin ports and keep us from having to write bf561-specific code in many places. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf54x: add missing SIC_RVECT definitionMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: H8606: move 8250 irqflags to platform resourcesMike Frysinger
Now that the common 8250 serial driver supports an "irqflags" field, we don't need to patch in a custom define into the code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: glue XIP/ROM kernel kconfigsMike Frysinger
Different arches use different names, so make sure we define both so common code (like MTD_XIP) "just works". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: update sparse flags for latest upstream changesMike Frysinger
Mainline version of git merged support for Blackfin parts, but we now need to propagate the gcc arch define to make it work. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: coreb: update ioctl numbersMike Frysinger
We have to use ioctl numbers that don't collide with common code. Otherwise, these ones never even get called because the common fs code swalled all invocations. Reported-by: Kay Duenzer <kduenzer@maku.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: coreb: add gpl module licenseMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf518-ezkit: add ssm2603 codec resourcesBob Liu
This board has a SSM2603 codec, so make sure we have the right resources declared for it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpersBob Liu
The RX/TX address is always the same regardless of the size of the access. That means there is no dedicated "16bit" or "32bit" MMR. Trying to use these currently leads to compile errors. So change everything to use the right MMR define. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: tll6527m: new board portAshish Gupta
Signed-off-by: Ashish Gupta <asg@thelearninglabs.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-bootMike Frysinger
Since these boards can boot out of NAND, make sure we give u-boot its own partition by default to avoid clobbering it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: merge kernel init memory back into main memory regionSonic Zhang
If the kernel's init section is merged back into the main memory region during boot (which it should since that is how we've laid out the kernel linker map), we want to make sure that these aren't counted as independent regions. Otherwise, if a large mapping is attempted which starts in the init region and extends into the main memory region, the access_ok func will deny it. This leads to weird messages during runtime like "unable to map xxx library" from the ldso but upon running the application again, everything works fine. So if the address of the end of the init region is the same as the start of the main memory region, simply enlarge the memory region to include the init region. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: gpio: add peripheral group checksteven miao
Many Blackfin parts group sets of pins into a single functional unit. This means you cannot use different pins within a group for different peripherals. Our resource conflict checking thus far has been limited to individual pins, so if someone tried to grab a different pin from the same group, it would be allowed while silently changing the other pins in the same group. One common example is the pin set PG12 - PG15 on BF51x parts. They may either be used with SPI0 (1st function), or they may be used with PTP/PWM/AMS3 (3rd function). Ideally, we'd like to use PG12 - PG14 for SPI0 while using PG15 with AMS3, but the hardware does not permit this. In the past, the software would allow the pins to be requested this way, but ultimately things like the Blackfin SPI driver would stop working when the hardware rerouted to a different peripheral. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQMike Frysinger
Reported-by: D Binderman <dcb314@hotmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: add new cacheflush syscallSonic Zhang
Flushing caches sometimes requires anomaly workarounds which require supervisor-only insns. Normally we don't need to flush caches from userspace so this isn't a problem, but when gcc generates trampolines on the stack, we do. So add a new syscall for gcc to use modeled after the mips version. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf548-ezkit: increase u-boot partition sizeMike Frysinger
The BF54x processor has a ton of on-chip peripherals and in order to support them all, the u-boot image is quite large. So give it 512KiB in all bootable flashes to make our lives easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: add example i2c resources for ad525x devicessteven miao
Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: SIC: fix off-by-one error in loopMichael Hennerich
Make sure we include EMAC_SYSTAT when showing errors. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: tweak i2c address for ad5280 add-on tftlcd boardSonic Zhang
The predefined i2c address 0x2c doesn't match the configuration of the ad5280 PINs AD0 and AD1 on the tftlcd add-on board. Both AD0 and AD1 are of voltage 3.3V, which means the i2c address should be 0x2F. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf51x: enable support for 0.2 siliconMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: initial preempt support while returning from interruptBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: workaround anomaly 05000481 (corruption with ITEST MMRs)Robin Getz
Nothing actually needs to use these MMRs (as direct cache manipulation is done with the DTEST MMRs), so simply hide the read funcs behind the anomaly define. They're generally unusable anyways when this anomaly is in effect. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: i2c-gpio boards: use GPIO_PF# definesMike Frysinger
Rather than use raw numbers for the GPIO pins, use proper GPIO defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: access_ok: permit L1 stackBarry Song
When apps run with their stack in L1, some system calls might be made where a buffer is in the stack as an argument. So make sure the core Blackfin access code does not reject this memory location. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf561-ezkit: add AD1836 codec resourcesBarry Song
This board has an AD1836 codec, so make sure we have the right resources declared for it. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: ptrace: enable access to L1 stacksBarry Song
If an app is placing its stack in L1 scratchpad SRAM, make sure ptrace is granted access to it so that gdb can do its thing. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger
The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: ad7160eval: new board portMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: re-use regulator framework with ad5398 partsSonic Zhang
We don't need our own header and structure to hook up the ad5398 part, so drop the custom resources for it. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: re-use the fixed regulator voltage driverSonic Zhang
Rather than write our own ADP switch driver, use the existing fixed regulator driver and rewrite the platform resources accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: SIC: BF537: change default data/error relative prioritiesMichael Hennerich
Some peripherals might generate an error interrupt shortly after the data interrupt due to the fact that the peripheral isn't serviced fast enough. In most cases this isn't a problem and is expected behavior. This hasn't been a problem on most parts since you simply don't request the error interrupt (or you leave it disabled while there is an expected state) and do the peripheral status checking in the data interrupt. The Blackfin SIC allows people to prioritize data and error interrupts, and the Blackfin CEC allows interrupts of equal or higher priority to nest. The current default settings gives error interrupts a higher priority than data interrupts. So if an error occurs while processing the data interrupt, it will be serviced immediately. However, the error interrupt on the BF537 SIC cannot be enabled on a per-peripheral basis. Once the error interrupt is enabled for one peripheral, it is automatically enabled for all peripherals. Therefore lower the default multiplexed error interrupt priority so most people need not worry themselves with this issue. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example IIO resourcesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: use correct spi mode with ad2s90 partsBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example adau1373 i2c resourcesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example adav801/3 resourcesYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example ad1937 i2c resourcesBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>